From: Julien Cubizolles <j.cubizolles@free.fr>
To: Amitkumar Karwar <akarwar@marvell.com>
Cc: Dan Williams <dcbw@redhat.com>,
"linux-wireless\@vger.kernel.org"
<linux-wireless@vger.kernel.org>,
"Nishant Sarmukadam" <nishants@marvell.com>
Subject: Re: mwifiex problem: incompatible network settings
Date: Wed, 04 Nov 2015 23:04:06 +0100 [thread overview]
Message-ID: <87r3k5h161.fsf@free.fr> (raw)
In-Reply-To: b2db7a93638f44b683aef052ca442c5c@SC-EXCH04.marvell.com
[-- Attachment #1: Type: text/plain, Size: 1202 bytes --]
Amitkumar Karwar <akarwar@marvell.com> writes:
> Thanks for the logs. I compared your network manager log with the one
> on my setup. Both are same. Basically network manager log doesn't show
> security info (WPA/WPA2, encryption mode etc). So we can't rely on
> that.
> I checked your kernel log shared in previous email. It's
> incomplete. It didn't include information when connection was actually
> attempted. Probably you can run "dmesg -c >> dmesg.log" in loop with
> some delay to capture complete info. Otherwise sharing
> "/var/log/messages" is also an option.
> I have created a driver debug patch(attached). Could you please apply it and share complete dmesg log?
I applied your patch. Here are the dmesg logs when logging to a WPA
network with authentification (dmesg-WPA.log, ssid southcentral) and a
network without authentification (dmesg-noWPA.log, ssid FreeWifi).
Let me know if you need anything else.
> Btw, do you see the problem if AP is configured in WPA2 security mode?
Good catch, I changed my access point to WPA2 and now I can connect to
it ! I attached the corresponding dmesg logs (dmesg-WPA2.log, ssid southcentral).
> Regards,
> Amitkumar
[-- Attachment #2: dmesg-WPA.log --]
[-- Type: application/octet-stream, Size: 3138 bytes --]
[ 408.658220] IPv6: ADDRCONF(NETDEV_UP): wlx6045bdf646b4: link is not ready
[ 408.706137] IPv6: ADDRCONF(NETDEV_UP): wlx6045bdf646b4: link is not ready
[ 421.728415] MWIFIEX: auth_type = 0
[ 421.728424] MWIFIEX: pairwise enc_mode = 1
[ 421.728428] MWIFIEX: groupwise enc_mode = fac02
[ 421.728436] IE:00000000: 7f 04 00 00 0a 02 dd 16 00 50 f2 01 01 00 00 50
[ 421.728442] IE:00000010: f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
[ 421.728456] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
[ 421.728476] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
[ 421.728483] usb 1-3: Incompatible network settings
[ 421.728490] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
[ 425.675580] MWIFIEX: auth_type = 0
[ 425.675590] MWIFIEX: pairwise enc_mode = 1
[ 425.675595] MWIFIEX: groupwise enc_mode = fac02
[ 425.675604] IE:00000000: 7f 04 00 00 0a 02 dd 16 00 50 f2 01 01 00 00 50
[ 425.675610] IE:00000010: f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
[ 425.675624] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
[ 425.675645] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
[ 425.675652] usb 1-3: Incompatible network settings
[ 425.675660] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
[ 430.023460] MWIFIEX: auth_type = 0
[ 430.023468] MWIFIEX: pairwise enc_mode = 1
[ 430.023472] MWIFIEX: groupwise enc_mode = fac02
[ 430.023480] IE:00000000: 7f 04 00 00 0a 02 dd 16 00 50 f2 01 01 00 00 50
[ 430.023485] IE:00000010: f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
[ 430.023497] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
[ 430.023513] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
[ 430.023517] usb 1-3: Incompatible network settings
[ 430.023521] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
[ 434.874343] MWIFIEX: auth_type = 0
[ 434.874351] MWIFIEX: pairwise enc_mode = 1
[ 434.874356] MWIFIEX: groupwise enc_mode = fac02
[ 434.874365] IE:00000000: 7f 04 00 00 0a 02 dd 16 00 50 f2 01 01 00 00 50
[ 434.874370] IE:00000010: f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
[ 434.874385] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
[ 434.874404] usb 1-3: info: mwifiex_is_network_compatible: failed: wpa_ie=0xdd wpa2_ie=0x0 WEP=d WPA=d WPA2=d EncMode=0xfac02 privacy=0x1
[ 434.874411] usb 1-3: Incompatible network settings
[ 434.874419] usb 1-3: info: association to bssid f4:ca:e5:ef:be:18 failed
[ 443.099983] IPv6: ADDRCONF(NETDEV_UP): wlx6045bdf646b4: link is not ready
[ 443.725739] MWIFIEX: auth_type = 0
[ 443.725753] IE:00000000: 7f 04 00 00 0a 02
[ 443.725768] usb 1-3: info: trying to associate to 'FreeWifi' bssid f4:ca:e5:ef:be:19
[ 443.740830] usb 1-3: info: associated to bssid f4:ca:e5:ef:be:19 successfully
[ 443.740978] IPv6: ADDRCONF(NETDEV_CHANGE): wlx6045bdf646b4: link becomes ready
[-- Attachment #3: dmesg-noWPA.log --]
[-- Type: application/octet-stream, Size: 302 bytes --]
[ 571.959634] MWIFIEX: auth_type = 0
[ 571.959647] IE:00000000: 7f 04 00 00 0a 02
[ 571.959661] usb 1-3: info: trying to associate to 'FreeWifi' bssid f4:ca:e5:ef:be:19
[ 571.972941] usb 1-3: info: associated to bssid f4:ca:e5:ef:be:19 successfully
[ 577.161064] usb 1-3: Rx of mgmt packet failed
[-- Attachment #4: dmesg-WPA2.log --]
[-- Type: application/octet-stream, Size: 539 bytes --]
[ 282.545909] MWIFIEX: auth_type = 0
[ 282.545912] MWIFIEX: pairwise enc_mode = 1
[ 282.545914] MWIFIEX: groupwise enc_mode = fac02
[ 282.545916] MWIFIEX: wpa = 0, wpa2 = 1
[ 282.545919] IE:00000000: 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00
[ 282.545922] IE:00000010: 00 0f ac 02 00 00 7f 04 00 00 0a 02
[ 282.545927] usb 1-3: info: trying to associate to 'southcentral' bssid f4:ca:e5:ef:be:18
[ 282.560325] usb 1-3: info: associated to bssid f4:ca:e5:ef:be:18 successfully
[ 283.268231] usb 1-3: Rx of mgmt packet failed
next prev parent reply other threads:[~2015-11-04 22:04 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-26 15:51 mwifiex problem: incompatible network settings Julien Cubizolles
2015-10-26 16:10 ` Dan Williams
2015-10-26 21:50 ` Julien Cubizolles
2015-10-27 15:11 ` Dan Williams
2015-10-27 18:55 ` Amitkumar Karwar
2015-10-27 21:44 ` Julien Cubizolles
2015-10-28 14:50 ` Dan Williams
2015-10-28 21:38 ` Julien Cubizolles
2015-10-29 12:27 ` Amitkumar Karwar
2015-10-29 15:16 ` Dan Williams
2015-10-30 10:34 ` Amitkumar Karwar
2015-11-04 22:04 ` Julien Cubizolles [this message]
2015-11-05 8:59 ` Amitkumar Karwar
2015-11-07 7:38 ` Julien Cubizolles
2015-11-25 14:22 ` Amitkumar Karwar
2015-12-01 10:35 ` Julien Cubizolles
2015-12-01 10:36 ` Amitkumar Karwar
-- strict thread matches above, loose matches on Subject: below --
2015-10-29 14:29 Ujjal Roy
2015-10-30 10:27 ` Amitkumar Karwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r3k5h161.fsf@free.fr \
--to=j.cubizolles@free.fr \
--cc=akarwar@marvell.com \
--cc=dcbw@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nishants@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).