Re: [PATCH] ath11k: Fix register write failure on QCN9074

[Kalle Valo <kvalo@kernel.org>]

Manikanta Pubbisetty <quic_mpubbise@quicinc.com> writes:

> Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750")
> regressed QCN9074. With the above mentioned commit, writes are failing
> for some registers on QCN9074 although the device seems to work
> normally.
>
> ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010
> ath11k_pci 0000:03:00.0: failed to set sysclk: -110
>
> PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window
> concept for register accesses. There are two schemes, dynamic & static
> window.
>
> In dynamic window scheme, a single window(region in the BAR) is mapped
> either to CE or DP register windows at any give time. QCA6390 & WCN6855
> follow this scheme for register accesses.
>
> In static window scheme, CE & DP register windows are statically mapped
> to separate regions with in the BAR so that there is no switching of
> register windows between CE & DP register accesses. QCN9074 & WCN6750
> follow this scheme although the window start offsets are different for
> QCN9074 & WCN6750.
>
> QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively
> whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with
> 2nd & 3rd windows, 1st window is also used for certain configurations
> which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750")
> did not account for and hence the regression.
>
> Fix this by going back to the original way of accessing the registers on
> QCN9074. Since this diverges from WCN6750 way of accessing registers, it
> is required to register window_read32/window_write32() pci_ops for WCN6750.
> We can also get rid of dp_window_idx & ce_window_idx members in hw_params,
> so remove them.
>
> Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops
> to the ath11k core. This API checks for mandatory pci_ops() and reports
> error if those are missing. Also initialize unused pci_ops to NULL.
>
> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
>
> Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750")
> Reported-by: Maxime Bizon <mbizon@freebox.fr>
> Tested-by: Maxime Bizon <mbizon@freebox.fr>
> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>

[...]

> --- a/drivers/net/wireless/ath/ath11k/pci.c
> +++ b/drivers/net/wireless/ath/ath11k/pci.c
> @@ -50,6 +50,23 @@ static void ath11k_pci_bus_release(struct ath11k_base *ab)
>  	mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
>  }
>  
> +static inline u32 ath11k_pci_get_window_start(struct ath11k_base *ab, u32 offset)
> +{
> +	u32 window_start;
> +
> +	/* If offset lies within DP register range, use 3rd window */
> +	if ((offset ^ HAL_SEQ_WCSS_UMAC_OFFSET) < ATH11K_PCI_WINDOW_RANGE_MASK)
> +		window_start = 3 * ATH11K_PCI_WINDOW_START;
> +	/* If offset lies within CE register range, use 2nd window */
> +	else if ((offset ^ HAL_SEQ_WCSS_UMAC_CE0_SRC_REG(ab)) <
> +		 ATH11K_PCI_WINDOW_RANGE_MASK)
> +		window_start = 2 * ATH11K_PCI_WINDOW_START;
> +	else
> +		window_start = ATH11K_PCI_WINDOW_START;
> +
> +	return window_start;
> +}
> +
>  static inline void ath11k_pci_select_window(struct ath11k_pci *ab_pci, u32 offset)
>  {
>  	struct ath11k_base *ab = ab_pci->ab;
> @@ -70,13 +87,23 @@ static void
>  ath11k_pci_window_write32(struct ath11k_base *ab, u32 offset, u32 value)
>  {
>  	struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
> -	u32 window_start = ATH11K_PCI_WINDOW_START;
> +	u32 window_start;
>  
> -	spin_lock_bh(&ab_pci->window_lock);
> -	ath11k_pci_select_window(ab_pci, offset);
> -	iowrite32(value, ab->mem + window_start +
> -		  (offset & ATH11K_PCI_WINDOW_RANGE_MASK));
> -	spin_unlock_bh(&ab_pci->window_lock);
> +	if (ab->hw_params.static_window_map)
> +		window_start = ath11k_pci_get_window_start(ab, offset);
> +	else
> +		window_start = ATH11K_PCI_WINDOW_START;
> +
> +	if (window_start == ATH11K_PCI_WINDOW_START) {
> +		spin_lock_bh(&ab_pci->window_lock);
> +		ath11k_pci_select_window(ab_pci, offset);
> +		iowrite32(value, ab->mem + window_start +
> +			  (offset & ATH11K_PCI_WINDOW_RANGE_MASK));
> +		spin_unlock_bh(&ab_pci->window_lock);
> +	} else {
> +		iowrite32(value, ab->mem + window_start +
> +			  (offset & ATH11K_PCI_WINDOW_RANGE_MASK));
> +	}
>  }

I refactored ath11k_pci_get_window_start() a bit, please check my
changes here:

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=95094045d7f467aa8928307ea538d1fd9d15a239

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches