* [PATCH v3 1/3] cfg80211: add support to probe unexercised mesh link
2019-04-03 19:14 [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
@ 2019-04-03 19:14 ` Rajkumar Manoharan
2019-04-03 19:14 ` [PATCH v3 2/3] mac80211: add option for setting control flags Rajkumar Manoharan
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-04-03 19:14 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Rajkumar Manoharan
Adding support to allow mesh HWMP to measure link metrics on unexercised
direct mesh path by sending some data frames to other mesh points which
are not currently selected as a primary traffic path but only 1 hop away.
The absence of the primary path to the chosen node makes it necessary to
apply some form of marking on a chosen packet stream so that the packets
can be properly steered to the selected node for testing, and not by the
regular mesh path lookup.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
include/net/cfg80211.h | 6 +++++
include/uapi/linux/nl80211.h | 16 +++++++++++++
net/wireless/nl80211.c | 54 ++++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 13 +++++++++++
net/wireless/trace.h | 19 ++++++++++++++++
5 files changed, 108 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 13bfeb712d36..ae8a57b79a6e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3436,6 +3436,9 @@ struct cfg80211_pmsr_request {
* Statistics should be cumulative, currently no way to reset is provided.
* @start_pmsr: start peer measurement (e.g. FTM)
* @abort_pmsr: abort peer measurement
+ *
+ * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame
+ * and overrule HWMP path selection algorithm.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3750,6 +3753,9 @@ struct cfg80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct cfg80211_pmsr_request *request);
+
+ int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86ee286e..d4ec38f5934e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1065,6 +1065,21 @@
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
* determining the width and type.
*
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ * refreshing, is that from one mesh point we be able to send some data
+ * frames to other mesh points which are not currently selected as a
+ * primary traffic path, but which are only 1 hop away. The absence of
+ * the primary path to the chosen node makes it necessary to apply some
+ * form of marking on a chosen packet stream so that the packets can be
+ * properly steered to the selected node for testing, and not by the
+ * regular mesh path lookup. Further, the packets must be of type data
+ * so that the rate control (often embedded in firmware) is used for
+ * rate selection.
+ *
+ * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
+ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
+ * content. The frame is ethernet data.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1284,6 +1299,7 @@ enum nl80211_commands {
NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
NL80211_CMD_NOTIFY_RADAR,
+ NL80211_CMD_PROBE_MESH_LINK,
/* add new commands above here */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 47e30a58566c..ba97ceddd877 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -13259,6 +13259,52 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
return -ENOBUFS;
}
+static int nl80211_probe_mesh_link(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ struct station_info sinfo = {};
+ const u8 *buf;
+ size_t len;
+ u8 *dest;
+ int err;
+
+ if (!rdev->ops->probe_mesh_link || !rdev->ops->get_station)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_MAC] ||
+ !info->attrs[NL80211_ATTR_FRAME]) {
+ GENL_SET_ERR_MSG(info, "Frame or MAC missing");
+ return -EINVAL;
+ }
+
+ wdev_lock(wdev);
+ if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) {
+ wdev_unlock(wdev);
+ err = -EOPNOTSUPP;
+ return err;
+ }
+ wdev_unlock(wdev);
+
+ dest = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ buf = nla_data(info->attrs[NL80211_ATTR_FRAME]);
+ len = nla_len(info->attrs[NL80211_ATTR_FRAME]);
+
+ if (len < sizeof(struct ethhdr))
+ return -EINVAL;
+
+ if (!ether_addr_equal(buf, dest) || is_multicast_ether_addr(buf) ||
+ !ether_addr_equal(buf + ETH_ALEN, dev->dev_addr))
+ return -EINVAL;
+
+ err = rdev_get_station(rdev, dev, dest, &sinfo);
+ if (err)
+ return err;
+
+ return rdev_probe_mesh_link(rdev, dev, dest, buf, len);
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14199,6 +14245,14 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_PROBE_MESH_LINK,
+ .doit = nl80211_probe_mesh_link,
+ .policy = nl80211_policy,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 5cb48d135fab..ec1b4800872f 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -1272,4 +1272,17 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev,
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int
+rdev_probe_mesh_link(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *dest,
+ const void *buf, size_t len)
+{
+ int ret;
+
+ trace_rdev_probe_mesh_link(&rdev->wiphy, dev, dest, buf, len);
+ ret = rdev->ops->probe_mesh_link(&rdev->wiphy, dev, buf, len);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
#endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 44b2ce1bb13a..274a844c7ea9 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3362,6 +3362,25 @@
WIPHY_PR_ARG, WDEV_PR_ARG,
(unsigned long long)__entry->cookie)
);
+
+TRACE_EVENT(rdev_probe_mesh_link,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const u8 *dest, const u8 *buf, size_t len),
+ TP_ARGS(wiphy, netdev, dest, buf, len),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(dest)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(dest, dest);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest))
+);
+
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/3] mac80211: add option for setting control flags
2019-04-03 19:14 [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
2019-04-03 19:14 ` [PATCH v3 1/3] cfg80211: add " Rajkumar Manoharan
@ 2019-04-03 19:14 ` Rajkumar Manoharan
2019-04-03 19:14 ` [PATCH v3 3/3] mac80211: probe unexercised mesh links Rajkumar Manoharan
2019-04-09 12:02 ` [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Johannes Berg
3 siblings, 0 replies; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-04-03 19:14 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Rajkumar Manoharan
Allows setting of control flags of skb cb - if needed -
when calling ieee80211_subif_start_xmit().
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
net/mac80211/ieee80211_i.h | 3 ++-
net/mac80211/tdls.c | 2 +-
net/mac80211/tx.c | 18 +++++++++++-------
3 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e170f986d226..bf3906ba42dd 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1761,7 +1761,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev);
void __ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev,
- u32 info_flags);
+ u32 info_flags,
+ u32 ctrl_flags);
void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
struct sk_buff_head *skbs);
struct sk_buff *
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index d30690d79a58..24c37f91ca46 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -1056,7 +1056,7 @@ static void ieee80211_tdls_add_ies(struct ieee80211_sub_if_data *sdata,
/* disable bottom halves when entering the Tx path */
local_bh_disable();
- __ieee80211_subif_start_xmit(skb, dev, flags);
+ __ieee80211_subif_start_xmit(skb, dev, flags, 0);
local_bh_enable();
return ret;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 2e816dd67be7..f352ec9f150c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2431,6 +2431,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
* @sdata: virtual interface to build the header for
* @skb: the skb to build the header in
* @info_flags: skb flags to set
+ * @ctrl_flags: info control flags to set
*
* This function takes the skb with 802.3 header and reformats the header to
* the appropriate IEEE 802.11 header based on which interface the packet is
@@ -2446,7 +2447,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
*/
static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u32 info_flags,
- struct sta_info *sta)
+ struct sta_info *sta, u32 ctrl_flags)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_info *info;
@@ -2818,6 +2819,7 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
info->flags = info_flags;
info->ack_frame_id = info_id;
info->band = band;
+ info->control.flags = ctrl_flags;
return skb;
free:
@@ -3783,7 +3785,8 @@ void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
void __ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev,
- u32 info_flags)
+ u32 info_flags,
+ u32 ctrl_flags)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
@@ -3848,7 +3851,8 @@ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
skb->prev = NULL;
skb->next = NULL;
- skb = ieee80211_build_hdr(sdata, skb, info_flags, sta);
+ skb = ieee80211_build_hdr(sdata, skb, info_flags,
+ sta, ctrl_flags);
if (IS_ERR(skb))
goto out;
@@ -3988,9 +3992,9 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
__skb_queue_head_init(&queue);
ieee80211_convert_to_unicast(skb, dev, &queue);
while ((skb = __skb_dequeue(&queue)))
- __ieee80211_subif_start_xmit(skb, dev, 0);
+ __ieee80211_subif_start_xmit(skb, dev, 0, 0);
} else {
- __ieee80211_subif_start_xmit(skb, dev, 0);
+ __ieee80211_subif_start_xmit(skb, dev, 0, 0);
}
return NETDEV_TX_OK;
@@ -4015,7 +4019,7 @@ struct sk_buff *
goto out;
}
- skb = ieee80211_build_hdr(sdata, skb, info_flags, sta);
+ skb = ieee80211_build_hdr(sdata, skb, info_flags, sta, 0);
if (IS_ERR(skb))
goto out;
@@ -5052,7 +5056,7 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
skb_reset_mac_header(skb);
local_bh_disable();
- __ieee80211_subif_start_xmit(skb, skb->dev, flags);
+ __ieee80211_subif_start_xmit(skb, skb->dev, flags, 0);
local_bh_enable();
return 0;
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 3/3] mac80211: probe unexercised mesh links
2019-04-03 19:14 [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
2019-04-03 19:14 ` [PATCH v3 1/3] cfg80211: add " Rajkumar Manoharan
2019-04-03 19:14 ` [PATCH v3 2/3] mac80211: add option for setting control flags Rajkumar Manoharan
@ 2019-04-03 19:14 ` Rajkumar Manoharan
2019-04-09 12:02 ` [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Johannes Berg
3 siblings, 0 replies; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-04-03 19:14 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, Rajkumar Manoharan
The requirement for mesh link metric refreshing, is that from one
mesh point we be able to send some data frames to other mesh points
which are not currently selected as a primary traffic path, but which
are only 1 hop away. The absence of the primary path to the chosen node
makes it necessary to apply some form of marking on a chosen packet
stream so that the packets can be properly steered to the selected node
for testing, and not by the regular mesh path lookup.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
v2: fix addr1 for injected frames
v3: bugfix in filling DA
include/net/mac80211.h | 2 ++
net/mac80211/cfg.c | 1 +
net/mac80211/ieee80211_i.h | 2 ++
net/mac80211/mesh_hwmp.c | 4 ++++
net/mac80211/tx.c | 36 ++++++++++++++++++++++++++++++++++++
5 files changed, 45 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 98209b0cfdaf..857b1cc6f66d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -807,6 +807,7 @@ enum mac80211_tx_info_flags {
* @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
* @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
* @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path
+ * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup
*
* These flags are used in tx_info->control.flags.
*/
@@ -816,6 +817,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
IEEE80211_TX_CTRL_AMSDU = BIT(3),
IEEE80211_TX_CTRL_FAST_XMIT = BIT(4),
+ IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5),
};
/*
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2860fc..10ce38ca48ee 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3990,4 +3990,5 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
+ .probe_mesh_link = ieee80211_probe_mesh_link,
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index bf3906ba42dd..61b05e58f38a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1779,6 +1779,8 @@ void ieee80211_tx_monitor(struct ieee80211_local *local, struct sk_buff *skb,
int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
const u8 *buf, size_t len,
const u8 *dest, __be16 proto, bool unencrypted);
+int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index f7517668e77a..8f4d0733b649 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1136,6 +1136,10 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
if (ieee80211_is_qos_nullfunc(hdr->frame_control))
return 0;
+ /* Allow injected packets to bypass mesh routing */
+ if (info->control.flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP)
+ return 0;
+
rcu_read_lock();
err = mesh_nexthop_lookup(sdata, skb);
if (!err)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index f352ec9f150c..20fc972a8c5b 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2601,6 +2601,13 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
goto free;
}
band = chanctx_conf->def.chan->band;
+
+ /* For injected frames, fill RA right away as nexthop lookup
+ * will be skipped.
+ */
+ if ((ctrl_flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) &&
+ is_zero_ether_addr(hdr.addr1))
+ memcpy(hdr.addr1, skb->data, ETH_ALEN);
break;
#endif
case NL80211_IFTYPE_STATION:
@@ -5061,3 +5068,32 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
return 0;
}
+
+int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + len +
+ 30 + /* header size */
+ 18); /* 11s header size */
+ if (!skb)
+ return -ENOMEM;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_put_data(skb, buf, len);
+
+ skb->dev = dev;
+ skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(skb);
+ skb_reset_mac_header(skb);
+
+ local_bh_disable();
+ __ieee80211_subif_start_xmit(skb, skb->dev, 0,
+ IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP);
+ local_bh_enable();
+
+ return 0;
+}
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link
2019-04-03 19:14 [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
` (2 preceding siblings ...)
2019-04-03 19:14 ` [PATCH v3 3/3] mac80211: probe unexercised mesh links Rajkumar Manoharan
@ 2019-04-09 12:02 ` Johannes Berg
2019-04-11 0:02 ` Rajkumar Manoharan
3 siblings, 1 reply; 6+ messages in thread
From: Johannes Berg @ 2019-04-09 12:02 UTC (permalink / raw)
To: Rajkumar Manoharan; +Cc: linux-wireless
On Wed, 2019-04-03 at 12:14 -0700, Rajkumar Manoharan wrote:
> Consider below mesh topology.
>
> MP1
> / \
> / \
> MP2 --- MP3
>
> Assume that even though MP1 & MP3 have direct mesh links, the path was
> established via MP2. (MP1 <-> MP2 <-> MP3). The 1-hop mesh link MP1 <-> MP3
> never be excercised till the current path is terminated. As of now, there
> is no option to send data frame to pick other than primary path. So mesh
> link metric between MP1 & MP3 never be updated. This series allows user
> to send data to 1-hop mesh peers through unexercised mesh path.
>
> -Rajkumar
>
> v3: Rebased the changes on TOT
Hmm. Please rebase again, and retest, because I just applied this and it
doesn't even compile ...
johannes
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link
2019-04-09 12:02 ` [PATCH v3 0/3] wireless: Add support to probe unexercised mesh link Johannes Berg
@ 2019-04-11 0:02 ` Rajkumar Manoharan
0 siblings, 0 replies; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-04-11 0:02 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
On 2019-04-09 05:02, Johannes Berg wrote:
> On Wed, 2019-04-03 at 12:14 -0700, Rajkumar Manoharan wrote:
>> Consider below mesh topology.
>>
>> MP1
>> / \
>> / \
>> MP2 --- MP3
>>
>> Assume that even though MP1 & MP3 have direct mesh links, the path was
>> established via MP2. (MP1 <-> MP2 <-> MP3). The 1-hop mesh link MP1
>> <-> MP3
>> never be excercised till the current path is terminated. As of now,
>> there
>> is no option to send data frame to pick other than primary path. So
>> mesh
>> link metric between MP1 & MP3 never be updated. This series allows
>> user
>> to send data to 1-hop mesh peers through unexercised mesh path.
>>
>> -Rajkumar
>>
>> v3: Rebased the changes on TOT
>
> Hmm. Please rebase again, and retest, because I just applied this and
> it
> doesn't even compile ...
>
Sure.. will send next version on top of mac80211-next.
-Rajkumar
^ permalink raw reply [flat|nested] 6+ messages in thread