From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from web56808.mail.re3.yahoo.com ([66.196.97.82]:42603 "HELO web56808.mail.re3.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752649Ab0EQTdY convert rfc822-to-8bit (ORCPT ); Mon, 17 May 2010 15:33:24 -0400 Message-ID: <974011.51480.qm@web56808.mail.re3.yahoo.com> Date: Mon, 17 May 2010 12:33:22 -0700 (PDT) From: Walter Goldens Subject: [PATCH] fix several minor description typos To: "John W. Linville" Cc: linux-wireless@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Walter Goldens --- --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -715,7 +715,7 @@ ath5k_eeprom_convert_pcal_info_5111(stru         /* Only one curve for RF5111          * find out which one and place -         * in in pd_curves. +         * in pd_curves.          * Note: ee_x_gain is reversed here */         for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -459,7 +459,7 @@ struct ath9k_hw_version { #define AR_GENTMR_BIT(_index)    (1 << (_index)) /* - * Using de Bruijin sequence to to look up 1's index in a 32 bit number + * Using de Bruijin sequence to look up 1's index in a 32 bit number   * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001   */ #define debruijn32 0x077CB531U --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -54,7 +54,7 @@   *   LMAC. If you look at LMAC commands you'll se that they   *   are actually regular iwlwifi target commands encapsulated   *   into a special UMAC command called UMAC passthrough. - *   This is due to the fact the the host talks exclusively + *   This is due to the fact the host talks exclusively   *   to the UMAC and so there needs to be a special UMAC   *   command for talking to the LMAC.   *   This is how a wifi command is layed out: --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -666,7 +666,7 @@ void lbs_scan_worker(struct work_struct /**   *  @brief Interpret a BSS scan response returned from the firmware   * - *  Parse the various fixed fields and IEs passed back for a a BSS probe + *  Parse the various fixed fields and IEs passed back for a BSS probe   *  response or beacon from the scan command.  Record information as needed   *  in the scan table struct bss_descriptor for that entry.   * --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -68,7 +68,7 @@ struct dblock { } __attribute__ ((packed)); /* - * Plug Data References are located in in the image after the last data + * Plug Data References are located in the image after the last data   * block.  They refer to areas in the adapter memory where the plug data   * items with matching ID should be written.   */ --- a/drivers/net/wireless/orinoco/main.h +++ b/drivers/net/wireless/orinoco/main.h @@ -12,7 +12,7 @@ /* Compile time configuration and compatibility stuff               */ /********************************************************************/ -/* We do this this way to avoid ifdefs in the actual code */ +/* We do that this way to avoid ifdefs in the actual code */ #ifdef WIRELESS_SPY #define SPY_NUMBER(priv)    (priv->spy_data.spy_number) #else --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -224,7 +224,7 @@ void rt2x00lib_txdone(struct queue_entry     /*      * If the IV/EIV data was stripped from the frame before it was      * passed to the hardware, we should now reinsert it again because -     * mac80211 will expect the the same data to be present it the +     * mac80211 will expect the same data to be present it the      * frame as it was passed to us.      */     if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -855,7 +855,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, c     if (skb == NULL)         return -ENOMEM;     if (need_padding) { -        /* Make sure the the payload data is 4 byte aligned. */ +        /* Make sure the payload data is 4 byte aligned. */         skb_reserve(skb, 2);     } --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -844,7 +844,7 @@ out:   * @usb: a &struct zd_usb pointer   * @urb: URB to be freed   * - * Frees the the transmission URB, which means to put it on the free URB + * Frees the transmission URB, which means to put it on the free URB   * list.   */ static void free_tx_urb(struct zd_usb *usb, struct urb *urb) --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -302,7 +302,7 @@ static inline int ieee80211_is_data_qos( static inline int ieee80211_is_data_present(__le16 fc) {     /* -     * mask with 0x40 and test that that bit is clear to only return true +     * mask with 0x40 and test that this bit is clear to only return true      * for the data-containing substypes.      */     return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) == --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -132,7 +132,7 @@   *     %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and   *     %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.   * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - *     to the the specified ISO/IEC 3166-1 alpha2 country code. The core will + *     to the specified ISO/IEC 3166-1 alpha2 country code. The core will   *     store this as a valid request and then query userspace for it.   *   * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -90,7 +90,7 @@ enum ieee80211_channel_flags {   * @max_power: maximum transmission power (in dBm)   * @beacon_found: helper to regulatory code to indicate when a beacon   *    has been found on this channel. Use regulatory_hint_found_beacon() - *    to enable this, this is is useful only on 5 GHz band. + *    to enable this, this is useful only on 5 GHz band.   * @orig_mag: internal use   * @orig_mpwr: internal use   */ --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1767,7 +1767,7 @@ static void ieee80211_sta_work(struct wo     /*      * ieee80211_queue_work() should have picked up most cases, -     * here we'll pick the the rest. +     * here we'll pick the rest.      */     if (WARN(local->suspended, "STA MLME work scheduled while "          "going to suspend\n")) --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -47,7 +47,7 @@ static void ieee80211_handle_filtered_fr     /*      * This skb 'survived' a round-trip through the driver, and      * hopefully the driver didn't mangle it too badly. However, -     * we can definitely not rely on the the control information +     * we can definitely not rely on the control information      * being correct. Clear it so we don't get junk there, and      * indicate that it needs new processing, but must not be      * modified/encrypted again. --- a/net/mac80211/work.c +++ b/net/mac80211/work.c @@ -840,7 +840,7 @@ static void ieee80211_work_work(struct w     /*      * ieee80211_queue_work() should have picked up most cases, -     * here we'll pick the the rest. +     * here we'll pick the rest.      */     if (WARN(local->suspended, "work scheduled while going to suspend\n"))         return;