messages from 2013-06-26 08:13:51 to 2013-06-29 20:08:46 UTC [more...]
[RFC v2] mac80211: Use libnl-configurable values for retry counts
2013-06-29 20:08 UTC (2+ messages)
[PATCH 00/19] rt2x00: add experimental support for RT3593
2013-06-29 15:04 UTC (23+ messages)
` [PATCH 01/19] rt2x00: rt2800lib: add BBP register initialization "
` [rt2x00-users] "
` [PATCH 02/19] rt2x00: rt2800lib: add RFCSR "
` [PATCH 03/19] rt2x00: rt2800lib: add BBP post "
` [PATCH 04/19] rt2x00: rt2800lib: add TX power configuration "
` [PATCH 05/19] rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devices
` [PATCH 06/19] rt2x00: rt2800lib: fix antenna configuration for RT3593
` [PATCH 07/19] rt2x00: rt2800lib: add rt2800_txpower_to_dev helper
` [PATCH 08/19] rt2x00: rt2800lib: fix default TX power values for RT3593
` [PATCH 09/19] rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpers
` [PATCH 10/19] rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593
` [PATCH 11/19] rt2x00: rt2x00lib: fix LNA_A[12] "
` [PATCH 12/19] rt2x00: rt2800lib: add default_power3 field for three-chain devices
` [PATCH 13/19] rt2x00: rt2800lib: add rf_vals for RF3053
` [PATCH 14/19] rt2x00: rt2800lib: add channel configuration "
` [PATCH 15/19] rt2x00: rt2800lib: enable VCO recalibration "
` [PATCH 16/19] rt2x00: rt2800lib: enable RF3053 support
` [PATCH 17/19] rt2x00: rt2800lib: enable RT3593 support
` [PATCH 18/19] rt2x00: rt2800usb: use correct [RT]XWI size for RT3593
` [PATCH 19/19] rt2x00: rt2800usb: add USB device ID for Linksys AE3000
` [rt2x00-users] [PATCH 00/19] rt2x00: add experimental support for RT3593
[PATCH 19/19] rt2x00: rt2800usb: add USB device ID for Linksys AE3000
2013-06-29 11:38 UTC (2+ messages)
[PATCH 02/19] rt2x00: rt2800lib: add RFCSR register initialization for RT3593
2013-06-29 11:17 UTC (2+ messages)
[PATCH] iwl3945: better skb management in rx path
2013-06-28 23:05 UTC (6+ messages)
` [PATCH v3] "
[PATCH v5 1/2] iw: use updated structures and enums for packet pattern
2013-06-28 19:53 UTC (2+ messages)
` [PATCH v5 2/2] iw: add coalesce support
Fwd: Re: TP-Link 8200ND - rtl8192cu module not loading / working
2013-06-28 19:15 UTC (13+ messages)
[PATCH] mac80211/minstrel_ht: fix cck rate sampling
2013-06-28 19:04 UTC
[PATCH v5] cfg80211/nl80211: Add packet coalesce support
2013-06-28 18:51 UTC
pull request: wireless-next 2013-06-28
2013-06-28 17:40 UTC
Fwd: HP6715b laptop's wireless radio on LED went off after 1st boot of 3.9.6 from 3.4.4 - please help / any ideas ?
2013-06-28 17:35 UTC
linux-next: Tree for Jun 28 (net/nfc/nci)
2013-06-28 16:49 UTC
rtl8192cu: slow path warning and connection problem v3.10-rc5
2013-06-28 14:16 UTC (9+ messages)
` rtl8192cu: slow path warning
[PATCH] rtlwifi: Initialize power-setting callback for USB devices
2013-06-28 14:12 UTC
RTL8192CU on ARM not working
2013-06-28 13:40 UTC (4+ messages)
[PATCH] Documentation: dt: bindings: TI WiLink modules
2013-06-28 13:21 UTC (28+ messages)
[PATCH] cfg80211: fix bugs in new SME implementation
2013-06-28 9:41 UTC
[PATCH 1/2] nl80211: enable HT overrides for ibss
2013-06-28 8:39 UTC (2+ messages)
` [PATCH 2/2] mac80211: "
[PATCH] ath10k: minimally handle new channel width enumeration values
2013-06-28 7:10 UTC (2+ messages)
[PATCHv5 00/18] Add support for 5 and 10 MHz channels
2013-06-27 16:59 UTC (20+ messages)
` [PATCHv5 01/18] nl80211: add scan width to bss and scan request structs
` [PATCHv5 02/18] mac80211/rc80211: add chandef to rate initialization
` [PATCHv5 03/18] mac80211: fix timing for 5 MHz and 10 MHz channels
` [PATCHv5 04/18] mac80211: select and adjust bitrates according to channel mode
` [PATCHv5 05/18] cfg80211/mac80211: get mandatory rates based on rate flags
` [PATCHv5 05/18] cfg80211/mac80211: get mandatory rates based on scan width
` [PATCHv5 06/18] cfg80211/mac80211: use reduced txpower for 5 and 10 MHz
` [PATCHv5 07/18] mac80211: add radiotap flag and handling for 5/10 MHz
` [PATCHv5 08/18] mac80211: allow scanning for 5/10 MHz channels in IBSS
` [PATCHv5 09/18] mac80211: return if IBSS chandef can not be used
` [PATCHv5 10/18] nl80211: allow 5 and 10 MHz channels for IBSS
` [PATCHv5 11/18] ath9k: always use SIFS times from OFDM for 5/10 MHz
` [PATCHv5 12/18] ath9k: use chandef instead of channel_type
` [PATCHv5 13/18] ath9k: report 5/10 MHz channels
` [PATCHv5 14/18] ath9k: set 5/10 MHz supported channels and fix bitrate
` [PATCHv5 15/18] ath9k: announce that ath9k supports 5/10 MHz
` [PATCHv5 16/18] ath5k: report 5/10 MHz channels
` [PATCHv5 17/18] ath5k: set 5/10 MHz supported channels and fix duration
` [PATCHv5 18/18] ath5k: enable support for 5 MHz and 10 MHz channels
[PATCHv4 00/18] Add support for 5 and 10 MHz channels
2013-06-27 16:07 UTC (30+ messages)
` [PATCHv4 01/18] nl80211: add scan width to bss and scan request
` [PATCHv4 02/18] mac80211/rc80211: add chandef to rate initialization
` [PATCHv4 03/18] mac80211: fix timing for 5 MHz and 10 MHz channels
` [PATCHv4 04/18] mac80211: select and adjust bitrates according to channel mode
` [PATCHv4 05/18] cfg80211/mac80211: get mandatory rates based on rate flags
` [PATCHv4 06/18] cfg80211/mac80211: use reduced txpower for 5 and 10 MHz
` [PATCHv4 07/18] mac80211: add radiotap flag and handling for 5/10 MHz
` [PATCHv4 08/18] mac80211: allow scanning for 5/10 MHz channels in IBSS
` [PATCHv4 09/18] mac80211: return if IBSS chandef can not be used
` [PATCHv4 10/18] nl80211: allow 5 and 10 MHz channels for IBSS
` [PATCHv4 11/18] ath9k: always use SIFS times from OFDM for 5/10 MHz
` [PATCHv4 12/18] ath9k: use chandef instead of channel_type
` [PATCHv4 13/18] ath9k: report 5/10 MHz channels
` [PATCHv4 14/18] ath9k: set 5/10 MHz supported channels and fix bitrate
` [PATCHv4 15/18] ath9k: announce that ath9k supports 5/10 MHz
` [PATCHv4 16/18] ath5k: report 5/10 MHz channels
` [PATCHv4 17/18] ath5k: set 5/10 MHz supported channels and fix duration
` [PATCHv4 18/18] ath5k: enable support for 5 MHz and 10 MHz channels
[v3.10-rc2] iwlwifi regression
2013-06-27 14:43 UTC (5+ messages)
ACS and Hostapd
2013-06-27 14:03 UTC (5+ messages)
Timer rollback in beacons on AR9342-based AP
2013-06-27 13:46 UTC (2+ messages)
3.10.0-rc7-00135-g98b6ed0: wrong command queue 0 (should be 4), sequence 0x4A readp=112 writep=112
2013-06-27 13:38 UTC
[PATCH v13 0/2] P2P find phase offload
2013-06-27 11:17 UTC (3+ messages)
` [PATCH v13 1/2] cfg80211: add 'flags' to cfg80211_rx_mgmt()
` [PATCH v13 2/2] cfg80211: P2P find phase offload
[PATCH v2] mac80211: prevent the buffering or frame transmission to non-assoc mesh STA
2013-06-27 10:42 UTC
TP-Link 8200ND - rtl8192cu module not loading / working
2013-06-27 9:18 UTC
[PATCH] nl80211: fix missing rtnl_unlock()
2013-06-27 8:18 UTC
[RFC] mac80211: Use libnl-configurable values for retry counts
2013-06-27 8:09 UTC (3+ messages)
[PATCH V2] vlan priority handling in WMM
2013-06-27 7:52 UTC
pull-request: iwlwifi-next 2013-06-25
2013-06-27 0:05 UTC (2+ messages)
[PATCH] ath9k_htc: ifdef out IFTYPE_MESH advertisement
2013-06-26 22:06 UTC
regression after, " ath9k_htc: Add support for mesh interfaces"
2013-06-26 21:45 UTC (8+ messages)
[PATCH v4 1/2] cfg80211/nl80211: rename packet pattern related structures and enums
2013-06-26 18:53 UTC (5+ messages)
` [PATCH v4 2/2] cfg80211/nl80211: Add packet coalesce support
[PATCH 0/5] rt2x00: rt2800lib: add support for extended EEPROM of three-cain devices
2013-06-26 17:55 UTC (6+ messages)
` [PATCH 1/5] rt2x00: rt2800lib: introduce rt2800_eeprom_word enum
` [PATCH 2/5] rt2x00: rt2800lib: introduce local EEPROM access functions
` [PATCH 3/5] rt2x00: rt2800lib: introduce rt2800_eeprom_read_from_array helper
` [PATCH 4/5] rt2x00: rt2800lib: introduce rt2800_eeprom_word_index helper
` [PATCH 5/5] rt2x00: rt2800lib: add EEPROM map for the RT3593 chipset
[PATCH v12 0/2] P2P find phase offload
2013-06-26 15:31 UTC (5+ messages)
` [PATCH v12 1/2] cfg80211: add 'flags' to cfg80211_rx_mgmt()
` [PATCH v12 2/2] cfg80211: P2P find phase offload
[PATCH] iw: fix incorrect bit shifting in print_ht_mcs
2013-06-26 15:24 UTC (2+ messages)
[PATCH] iw: reorder some code in iw_connect to avoid a potential memory leak
2013-06-26 15:07 UTC
pull request: bluetooth 2013-06-23
2013-06-26 12:47 UTC (6+ messages)
[PATCH 0/9] brcmfmac: platform data change and cleanup
2013-06-26 12:35 UTC (11+ messages)
` [PATCH 1/9] brcmfmac: simplify transmit path
` [PATCH 2/9] brcmfmac: remove (ab)use of NL80211_NUM_ACS
` [PATCH 3/9] brcmfmac: remove SDIO_REQ_ASYNC flag
` [PATCH 4/9] brcmfmac: use unified dongle address preparation function
` [PATCH 5/9] brcmfmac: add broken scatter-gather DMA support
` [PATCH 6/9] brcmfmac: tag packet in the netdev transmit callback
` [PATCH V2 "
` [PATCH 7/9] brcmfmac: cleanup debug messages in brcmf_fws_hdrpush()
` [PATCH 8/9] brcmfmac: reduce firmware-signalling locking scope in rx path
` [PATCH 9/9] brcmfmac: remove code and comment for older kernel support
[PATCH] cfg80211/mac80211: fix doc compilation warnings
2013-06-26 12:23 UTC (3+ messages)
Stable releases 3.6 - 2.6.26 are not available [hosting is down]
2013-06-26 11:30 UTC
[PATCH] wireless: vlan priority handling in WMM
2013-06-26 9:36 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).