linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Luis R. Rodriguez" <mcgrof@gmail.com>
To: Pekka Pietikainen <pp@ee.oulu.fi>,
	Michael Green <Michael.Green@atheros.com>,
	David Quan <David.Quan@atheros.com>
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org
Subject: Re: wireless-regdb: FI/CZ updates
Date: Tue, 25 May 2010 12:06:49 -0700	[thread overview]
Message-ID: <AANLkTikXyd47rhxpDktfEk89tnBlooXKMhKNisp3GcXd@mail.gmail.com> (raw)
In-Reply-To: <20100525132035.GA863@ee.oulu.fi>

Thanks for the patch, Michael, please review and let me know what you think.

  Luis

On Tue, May 25, 2010 at 6:20 AM, Pekka Pietikainen <pp@ee.oulu.fi> wrote:
> Was looking at the relevant local regulations and noticed the regdb allowed
> less power at 5GHz than is actually allowed. Until I found the "If you don't do TPC you have
> to reduce your power by 3dB sometimes" bit on the next page.
>
> And looks like someone that did the entry for CZ fell into the same trap, they have
>
> "stations in the c and d bands must employ automatic transmitter power
> control, which provides, on average, an interference mitigation factor at
> least 3 dB on the maximum permitted output power of the systems.  If
> automatic power control is not employed, the maximum permitted mean e.i.r.p.
> and the corresponding limit of the mean e.i.r.p.  density for bands c and d
> must be reduced by 3 dB;"
>
> Please sanity check, I became very confused while looking into this.
> (like some places starting their freq ranges at 2400, others at 2402. Didn't
> touch those, regs say 2400-2485,5, 5150-5250, 5250-5350 and 5470-5725)
>
> Signed-off-by: Pekka Pietikäinen <pp@ee.oulu.fi>
> diff -up ./db.txt.orig ./db.txt
> --- ./db.txt.orig       2010-05-25 15:03:48.812116854 +0300
> +++ ./db.txt    2010-05-25 15:58:43.947117884 +0300
> @@ -170,11 +170,13 @@ country CY:
>
>  # Data from http://www.ctu.eu/164/download/VOR/VOR-12-08-2005-34.pdf
>  # and http://www.ctu.eu/164/download/VOR/VOR-12-05-2007-6-AN.pdf
> +# Power at 5250 - 5350 MHz and 5470 - 5725 MHz can be doubled if TPC is
> +# implemented.
>  country CZ:
>        (2400 - 2483.5 @ 40), (N/A, 100 mW)
>        (5150 - 5250 @ 40), (N/A, 200 mW), NO-OUTDOOR
> -       (5250 - 5350 @ 40), (N/A, 200 mW), NO-OUTDOOR, DFS
> -       (5470 - 5725 @ 40), (N/A, 1000 mW), DFS
> +       (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
> +       (5470 - 5725 @ 40), (N/A, 500 mW), DFS
>
>  # Data from "Frequenznutzungsplan" (as published in April 2008),
>  # downloaded from http://www.bundesnetzagentur.de/media/archive/13358.pdf
> @@ -226,11 +228,15 @@ country ES:
>        (5250 - 5330 @ 40), (N/A, 20), DFS
>        (5490 - 5710 @ 40), (N/A, 27), DFS
>
> +# Data from FICORA Regulation 15Z / 2009 M
> +# http://www.ficora.fi/attachments/suomiry/5l1x1FIIk/Viestintavirasto15Z2009M.pdf
> +# Power at 5250 - 5350 MHz and 5470 - 5725 MHz can be doubled if TPC is
> +# implemented.
>  country FI:
> -       (2402 - 2482 @ 40), (N/A, 20)
> -       (5170 - 5250 @ 40), (N/A, 20)
> -       (5250 - 5330 @ 40), (N/A, 20), DFS
> -       (5490 - 5710 @ 40), (N/A, 27), DFS
> +       (2402 - 2482 @ 40), (N/A, 100mW)
> +       (5170 - 5250 @ 40), (N/A, 200mW), NO-OUTDOOR
> +       (5250 - 5330 @ 40), (N/A, 100mW), NO-OUTDOOR, DFS
> +       (5490 - 5710 @ 40), (N/A, 500mW), DFS
>
>  country FR:
>        (2402 - 2482 @ 40), (N/A, 20)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

  reply	other threads:[~2010-05-25 19:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-25 13:20 wireless-regdb: FI/CZ updates Pekka Pietikainen
2010-05-25 19:06 ` Luis R. Rodriguez [this message]
2010-05-26 18:30 ` Luis R. Rodriguez
2010-05-28 12:42   ` Pekka Pietikainen
2010-05-30 22:20     ` Carlos Laué
2010-06-02 20:12     ` Michael Green
2010-06-18 18:43     ` John W. Linville

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AANLkTikXyd47rhxpDktfEk89tnBlooXKMhKNisp3GcXd@mail.gmail.com \
    --to=mcgrof@gmail.com \
    --cc=David.Quan@atheros.com \
    --cc=Michael.Green@atheros.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=pp@ee.oulu.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).