From: Satish Eerpini <eerpini@gmail.com>
To: reinette chatre <reinette.chatre@intel.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: iwl3945 bug in 2.6.34
Date: Fri, 11 Jun 2010 17:09:17 +0530 [thread overview]
Message-ID: <AANLkTillaEGISTjW4iqpsNsJbaE6ZW7pqYvAzoBrkI69@mail.gmail.com> (raw)
In-Reply-To: <AANLkTinfoyhEyFjxReR6Oza7r_AQhcyMlpaXYB4ZjjlU@mail.gmail.com>
The 2.6.34 vanilla kernel with the above patches applied crashed again
today, I was amidst a conference on webex when this happened, still
not able to figure out what is the kind of traffic that causes the
driver to give up ... here is output from dmesg :
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: IN
cfg80211: Regulatory domain changed to country: IN
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 2000 mBm)
wlan0: authenticate with 00:1b:da:2a:a1:53 (try 1)
wlan0: authenticated
wlan0: associate with 00:1b:da:2a:a1:53 (try 1)
wlan0: RX AssocResp from 00:1b:da:2a:a1:53 (capab=0x411 status=0 aid=1)
wlan0: associated
usb 4-2: USB disconnect, address 4
iwl3945 0000:10:00.0: queue 2 stuck 3 time. Fw reload.
iwl3945 0000:10:00.0: On demand firmware reload
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF
iwl3945 0000:10:00.0: BSM uCode verification failed at addr
0x00003800+0 (of 900), is 0xffffffff, s/b 0xf802020
iwl3945 0000:10:00.0: Wait for START_ALIVE timeout after 2000ms.
No probe response from AP 00:1b:da:2a:a1:53 after 500ms, disconnecting.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: IN
cfg80211: Regulatory domain changed to country: IN
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 2000 mBm)
is there anything else that can be done ??
Cheers
Satish
On Fri, Jun 11, 2010 at 12:19 AM, Satish Eerpini <eerpini@gmail.com> wrote:
> I have applied the patches to the 2.6.34 kernel, my machine has been
> up for 20 hours now, there is nothing in the dmesg either, dmesg |
> grep wlan0 just gives this :
>
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> wlan0: deauthenticating from 00:1b:da:2a:a1:53 by local choice (reason=3)
> wlan0: authenticate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: authenticated
> wlan0: associate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: RX AssocResp from 00:1b:da:2a:a1:53 (capab=0x411 status=0 aid=1)
> wlan0: associated
> ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> wlan0: no IPv6 routers present
> wlan0: deauthenticating from 00:1b:da:2a:a1:53 by local choice (reason=3)
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> wlan0: deauthenticating from 00:1b:da:2a:a1:53 by local choice (reason=3)
> wlan0: authenticate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: authenticated
> wlan0: associate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: RX AssocResp from 00:1b:da:2a:a1:53 (capab=0x411 status=0 aid=1)
> wlan0: associated
> ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> wlan0: no IPv6 routers present
> wlan0: authenticate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: authenticated
> wlan0: associate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: RX AssocResp from 00:1b:da:2a:a1:53 (capab=0x411 status=0 aid=1)
> wlan0: associated
> wlan0: authenticate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: authenticated
> wlan0: associate with 00:1b:da:2a:a1:53 (try 1)
> wlan0: RX AssocResp from 00:1b:da:2a:a1:53 (capab=0x411 status=0 aid=1)
> wlan0: associated
>
> so I think after applying the patches, things have been working fine.
>
> Cheers
> Satish
>
> --
> http://satisheerpini.net
>
--
http://satisheerpini.net
next prev parent reply other threads:[~2010-06-11 11:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-23 6:25 iwl3945 bug in 2.6.34 Satish Eerpini
2010-05-24 18:03 ` John W. Linville
2010-05-24 18:33 ` reinette chatre
2010-05-24 22:08 ` reinette chatre
[not found] ` <AANLkTinFt5yiINXrc9-fnUl7NiyzN42eUotFnZdcxbas@mail.gmail.com>
2010-05-25 2:21 ` Satish Eerpini
2010-05-25 23:29 ` reinette chatre
2010-05-31 13:06 ` Ivan Bulatovic
2010-06-03 21:32 ` reinette chatre
2010-06-10 18:49 ` Satish Eerpini
2010-06-11 11:39 ` Satish Eerpini [this message]
2010-06-11 16:27 ` reinette chatre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTillaEGISTjW4iqpsNsJbaE6ZW7pqYvAzoBrkI69@mail.gmail.com \
--to=eerpini@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=reinette.chatre@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).