From: "Levi, Shahar" <shahar_levi@ti.com>
To: Luciano Coelho <coelho@ti.com>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH] wl12xx: FM WLAN coexistence
Date: Mon, 11 Apr 2011 14:12:23 +0300 [thread overview]
Message-ID: <BANLkTikLAdB7cpZmJPYDzHJ21aks=tuyZA@mail.gmail.com> (raw)
In-Reply-To: <1302113612.2366.34.camel@pimenta>
On Wed, Apr 6, 2011 at 9:13 PM, Luciano Coelho <coelho@ti.com> wrote:
> On Mon, 2011-04-04 at 10:07 +0300, Shahar Levi wrote:
>> Add support to FM WLAN coexistence (STA only).
>> Few WiFi harmonics may interfere FM operation, to
>> avoid this problem special coexistence techniques are
>> activated around some FM frequencies.
>>
>> Signed-off-by: Shahar Levi <shahar_levi@ti.com>
>> ---
>
> Some comments.
>
>
>> diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
>> index e005aa4..5f5afbe 100644
>> --- a/drivers/net/wireless/wl12xx/acx.c
>> +++ b/drivers/net/wireless/wl12xx/acx.c
>> @@ -1604,3 +1604,45 @@ out:
>> kfree(acx);
>> return ret;
>> }
>> +
>> +int wl1271_acx_fm_coex(struct wl1271 *wl)
>> +{
>> + struct wl1271_acx_fm_coex *acx;
>> + int ret;
>> +
>> + wl1271_debug(DEBUG_ACX, "acx fm coex setting");
>> +
>> + acx = kzalloc(sizeof(*acx), GFP_KERNEL);
>> + if (!acx) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> +
>> + acx->enable = wl->conf.fm_coex.enable;
>> + acx->swallow_period = wl->conf.fm_coex.swallow_period;
>> + acx->n_divider_fref_set_1 = wl->conf.fm_coex.n_divider_fref_set_1;
>> + acx->n_divider_fref_set_2 = wl->conf.fm_coex.n_divider_fref_set_2;
>> + acx->m_divider_fref_set_1 =
>> + cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_1);
>> + acx->m_divider_fref_set_2 =
>> + cpu_to_le16(wl->conf.fm_coex.m_divider_fref_set_2);
>> + acx->coex_pll_stabilization_time =
>> + cpu_to_le32(wl->conf.fm_coex.coex_pll_stabilization_time);
>
>> + acx->ldo_stabilization_timwl12xx-fm-coex-v2/e =
>> + cpu_to_le16(wl->conf.fm_coex.ldo_stabilization_time);
>
> What's this? There is some garbage pasted into this statement here!
How that get in? This is a typo of copy&paste of "wl12xx-fm-coex-v2/"
Will be fix.
>
>
>> diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
>> index 0a40cae..45242db 100644
>> --- a/drivers/net/wireless/wl12xx/acx.h
>> +++ b/drivers/net/wireless/wl12xx/acx.h
>> @@ -1172,6 +1172,65 @@ struct wl1271_acx_inconnection_sta {
>> u8 padding1[2];
>> } __packed;
>>
>> +/*
>> + * ACX_FM_COEX_CFG
>> + * set the FM co-existence parameters.
>> + */
>> +struct wl1271_acx_fm_coex {
>> + struct acx_header header;
>> + /* enable(1) / disable(0) the FM Coex feature */
>> + u8 enable;
>> + /*
>> + * Swallow period used in COEX PLL swallowing mechanism.
>> + * 0xFF = use FW default
>> + */
>> + u8 swallow_period;
>> + /*
>> + * The N divider used in COEX PLL swallowing mechanism for Fref of
>> + * 38.4/19.2 Mhz. 0xFF = use FW default
>> + */
>> + u8 n_divider_fref_set_1;
>> + /*
>> + * The N divider used in COEX PLL swallowing mechanism for Fref of
>> + * 26/52 Mhz. 0xFF = use FW default
>> + */
>> + u8 n_divider_fref_set_2;
>> + /*
>> + * The M divider used in COEX PLL swallowing mechanism for Fref of
>> + * 38.4/19.2 Mhz. 0xFFFF = use FW default
>> + */
>> + u16 m_divider_fref_set_1;
>
> This must be __le16.
Will be fix
>
>
>> + /*
>> + * The M divider used in COEX PLL swallowing mechanism for Fref of
>> + * 26/52 Mhz. 0xFFFF = use FW default
>> + */
>> + u16 m_divider_fref_set_2;
>
> Same here.
Will be fix
>
>
>> + /*
>> + * The time duration in uSec required for COEX PLL to stabilize.
>> + * 0xFFFFFFFF = use FW default
>> + */
>> + u32 coex_pll_stabilization_time;
>
> __le32
Will be fix
>
>
>> + /*
>> + * The time duration in uSec required for LDO to stabilize.
>> + * 0xFFFFFFFF = use FW default
>> + */
>> + u16 ldo_stabilization_time;
>
> __le16
Will be fix
>
>
> --
> Cheers,
> Luca.
--
All the best,
Shahar
prev parent reply other threads:[~2011-04-11 11:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-04 7:07 [PATCH] wl12xx: FM WLAN coexistence Shahar Levi
2011-04-06 18:13 ` Luciano Coelho
2011-04-11 11:12 ` Levi, Shahar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTikLAdB7cpZmJPYDzHJ21aks=tuyZA@mail.gmail.com' \
--to=shahar_levi@ti.com \
--cc=coelho@ti.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).