From: George Nychis <gnychis@gmail.com>
To: Sujith <m.sujith@gmail.com>
Cc: Mark Davis <marked86@gmail.com>,
linux-wireless@vger.kernel.org, Steven <srumney@sbcglobal.net>
Subject: Re: error initializing AR7010+AR9280 Xbox 802.11n adapter
Date: Fri, 6 May 2011 13:41:56 -0400 [thread overview]
Message-ID: <BANLkTin6qOChJQSmjoByS9C2_toFzHNq=A@mail.gmail.com> (raw)
In-Reply-To: <19908.11423.898062.510184@gargle.gargle.HOWL>
> This is UB94 based, so it should work with ath9k_htc.
> Can you post the output of lsusb -v ?
>
Sure:
Bus 001 Device 002: ID 0411:017f MelCo., Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0411 MelCo., Inc.
idProduct 0x017f
bcdDevice 2.02
iManufacturer 16 BUFFALO
iProduct 32 (CEWL 1)
iSerial 48 12345
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 60
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
next prev parent reply other threads:[~2011-05-06 17:41 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-01 5:23 error initializing AR7010+AR9280 Xbox 802.11n adapter George Nychis
2011-05-01 5:39 ` George Nychis
2011-05-01 6:31 ` Sujith
2011-05-01 6:39 ` Mark Davis
2011-05-01 14:21 ` George Nychis
[not found] ` <19903.49991.848934.183819@gargle.gargle.HOWL>
2011-05-03 13:30 ` George Nychis
2011-05-03 13:39 ` George Nychis
2011-05-03 18:39 ` George Nychis
2011-05-06 16:24 ` George Nychis
2011-05-06 17:15 ` Sujith
2011-05-06 17:41 ` George Nychis [this message]
2011-05-06 18:22 ` George Nychis
2011-05-09 16:42 ` George Nychis
2011-05-10 3:07 ` Sujith
2011-05-10 6:15 ` Sujith
2011-05-10 6:24 ` Sujith
2011-05-10 6:42 ` George Nychis
2011-05-10 6:50 ` Sujith
2011-05-10 6:57 ` George Nychis
2011-05-10 16:13 ` Sujith
2011-05-10 16:39 ` George Nychis
2011-05-11 15:14 ` Sujith
2011-05-11 15:22 ` George Nychis
2011-05-11 15:33 ` George Nychis
2011-05-12 14:42 ` George Nychis
2011-05-16 1:49 ` George Nychis
2011-05-16 3:16 ` Sujith
2011-05-16 14:12 ` George Nychis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTin6qOChJQSmjoByS9C2_toFzHNq=A@mail.gmail.com' \
--to=gnychis@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=m.sujith@gmail.com \
--cc=marked86@gmail.com \
--cc=srumney@sbcglobal.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).