* [PATCH v2 1/5] ssb: Change fallback sprom to callback mechanism.
[not found] <1305063094-26656-1-git-send-email-hauke@hauke-m.de>
@ 2011-05-10 21:31 ` Hauke Mehrtens
2011-05-10 23:12 ` Rafał Miłecki
2011-05-11 11:53 ` Ralf Baechle
0 siblings, 2 replies; 3+ messages in thread
From: Hauke Mehrtens @ 2011-05-10 21:31 UTC (permalink / raw)
To: ralf; +Cc: linux-mips, Hauke Mehrtens, netdev, linux-wireless,
Florian Fainelli
Some embedded devices like the Netgear WNDR3300 have two SSB based
cards without an own sprom on the pci bus. We have to provide two
different fallback sproms for these and this was not possible with the
old solution. In the bcm47xx architecture the sprom data is stored in
the nvram in the main flash storage. The architecture code will be able
to fill the sprom with the stored data based on the bus where the
device was found.
The bcm63xx code should do the same thing as before, just using the new
API.
Acked-by: Michael Buesch <mb@bu3sch.de>
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
v2: * fix some checkpatch errors and warnings
* spelling issues
arch/mips/bcm63xx/boards/board_bcm963xx.c | 16 +++++++++-
drivers/ssb/pci.c | 16 +++++++---
drivers/ssb/sprom.c | 43 +++++++++++++++++------------
drivers/ssb/ssb_private.h | 3 +-
include/linux/ssb/ssb.h | 4 ++-
5 files changed, 55 insertions(+), 27 deletions(-)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 8dba8cf..40b223b 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom = {
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
+
+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+ if (bus->bustype == SSB_BUSTYPE_PCI) {
+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
+ return 0;
+ } else {
+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+ return -EINVAL;
+ }
+}
#endif
/*
@@ -793,8 +804,9 @@ void __init board_prom_init(void)
if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
- printk(KERN_ERR "failed to register fallback SPROM\n");
+ if (ssb_arch_register_fallback_sprom(
+ &bcm63xx_get_fallback_sprom) < 0)
+ printk(KERN_ERR PFX "failed to register fallback SPROM\n");
}
#endif
}
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 6f34963..7ad4858 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -662,7 +662,6 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
- const struct ssb_sprom *fallback;
int err;
u16 *buf;
@@ -707,10 +706,17 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
- * If we have a fallback, use that. */
- fallback = ssb_get_fallback_sprom();
- if (fallback) {
- memcpy(sprom, fallback, sizeof(*sprom));
+ * Now we ask the arch code if there is some sprom
+ * available for this device in some other storage */
+ err = ssb_fill_sprom_with_fallback(bus, sprom);
+ if (err) {
+ ssb_printk(KERN_WARNING PFX "WARNING: Using"
+ " fallback SPROM failed (err %d)\n",
+ err);
+ } else {
+ ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
+ " revision %d provided by"
+ " platform.\n", sprom->revision);
err = 0;
goto out_free;
}
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 5f34d7a..45ff0e3 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -17,7 +17,7 @@
#include <linux/slab.h>
-static const struct ssb_sprom *fallback_sprom;
+static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out);
static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len,
@@ -145,36 +145,43 @@ out:
}
/**
- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found.
+ * ssb_arch_register_fallback_sprom - Registers a method providing a
+ * fallback SPROM if no SPROM is found.
*
- * @sprom: The SPROM data structure to register.
+ * @sprom_callback: The callback function.
*
- * With this function the architecture implementation may register a fallback
- * SPROM data structure. The fallback is only used for PCI based SSB devices,
- * where no valid SPROM can be found in the shadow registers.
+ * With this function the architecture implementation may register a
+ * callback handler which fills the SPROM data structure. The fallback is
+ * only used for PCI based SSB devices, where no valid SPROM can be found
+ * in the shadow registers.
*
- * This function is useful for weird architectures that have a half-assed SSB device
- * hardwired to their PCI bus.
+ * This function is useful for weird architectures that have a half-assed
+ * SSB device hardwired to their PCI bus.
*
- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently
- * don't use this fallback.
- * Architectures must provide the SPROM for native SSB devices anyway,
- * so the fallback also isn't used for native devices.
+ * Note that it does only work with PCI attached SSB devices. PCMCIA
+ * devices currently don't use this fallback.
+ * Architectures must provide the SPROM for native SSB devices anyway, so
+ * the fallback also isn't used for native devices.
*
- * This function is available for architecture code, only. So it is not exported.
+ * This function is available for architecture code, only. So it is not
+ * exported.
*/
-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom)
+int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out))
{
- if (fallback_sprom)
+ if (get_fallback_sprom)
return -EEXIST;
- fallback_sprom = sprom;
+ get_fallback_sprom = sprom_callback;
return 0;
}
-const struct ssb_sprom *ssb_get_fallback_sprom(void)
+int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
{
- return fallback_sprom;
+ if (!get_fallback_sprom)
+ return -ENOENT;
+
+ return get_fallback_sprom(bus, out);
}
/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 0331139..7765301 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -171,7 +171,8 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
const char *buf, size_t count,
int (*sprom_check_crc)(const u16 *sprom, size_t size),
int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom));
-extern const struct ssb_sprom *ssb_get_fallback_sprom(void);
+extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus,
+ struct ssb_sprom *out);
/* core.c */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 9659eff..045f72a 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struct ssb_bus *bus);
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+extern int ssb_arch_register_fallback_sprom(
+ int (*sprom_callback)(struct ssb_bus *bus,
+ struct ssb_sprom *out));
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 3+ messages in thread