Re: I always need a miracle to connect with iwlwifi

[Krishna Chaitanya <chaitanya.mgit@gmail.com>]

On Sat, Nov 2, 2013 at 11:16 AM, Felipe Contreras
<felipe.contreras@gmail.com> wrote:
>
> On Tue, Oct 29, 2013 at 8:23 AM, Krishna Chaitanya
> <chaitanya.mgit@gmail.com> wrote:
> > On Tue, Oct 29, 2013 at 3:02 AM, Felipe Contreras
> > <felipe.contreras@gmail.com> wrote:
>
> >> Yes, but maybe I overrode the file. I've pushed a new one again. The
> >> sha-1 is 36c260d8d8c171a24eb1aa7b2ea736b06c9b55b7.
> >>
> > Thanks, able to decode now. I am not familiar with the
> > iwlwifi code, but let me give it a try.
>
> Did you find anything?

Not Much, i could see the below pattern repeating

  wpa_supplicant-6915  [003]  5610.786592: drv_return_void:      phy1
  wpa_supplicant-6915  [003]  5610.786594: drv_sta_state:        phy1
vif:wlan0(2) sta:e0:1d:3b:46:82:a0 state: 0->1
  wpa_supplicant-6915  [003]  5610.786597: iwlwifi_dev_hcmd:
[0000:02:00.0] hcmd 0x18 (sync)
  irq/44-iwlwifi-6803  [001]  5610.786632: iwlwifi_dev_rx:
[0000:02:00.0] RX cmd 0x18
  wpa_supplicant-6915  [003]  5610.786639: drv_return_int:       phy1 - 0
  wpa_supplicant-6915  [003]  5610.786645: drv_mgd_prepare_tx:   phy1
vif:wlan0(2)
  wpa_supplicant-6915  [003]  5610.786645: drv_return_void:      phy1
  wpa_supplicant-6915  [003]  5610.786663: iwlwifi_dev_tx:
[0000:02:00.0] TX 1c (90 bytes)
  irq/44-iwlwifi-6803  [001]  5610.788677: iwlwifi_dev_rx:
[0000:02:00.0] RX cmd 0x1c
  irq/44-iwlwifi-6803  [001]  5610.788709: iwlwifi_dev_rx:
[0000:02:00.0] RX cmd 0xc0
  irq/44-iwlwifi-6803  [001]  5610.788710: iwlwifi_dev_rx:
[0000:02:00.0] RX cmd 0xc1
    kworker/u8:0-1459  [003]  5610.788730: drv_sta_state:        phy1
vif:wlan0(2) sta:e0:1d:3b:46:82:a0 state: 1->2
    kworker/u8:0-1459  [003]  5610.788732: drv_return_int:       phy1 - 0
    kworker/u8:0-1459  [003]  5610.999549: drv_sta_state:        phy1
vif:wlan0(2) sta:e0:1d:3b:46:82:a0 state: 2->1
    kworker/u8:0-1459  [003]  5610.999553: drv_return_int:       phy1 - 0
    kworker/u8:0-1459  [003]  5610.999553: drv_sta_state:        phy1
vif:wlan0(2) sta:e0:1d:3b:46:82:a0 state: 1->0
    kworker/u8:0-1459  [003]  5610.999554: drv_return_int:       phy1 - 0

So We move from NONE to AUTH and then AUTH to NONE. iwlwifi_dev_tx is
transmistting 90 bytes packets
but auth request is only 43 bytes, could that be association request??
If yes where is that getting dropped.

So my guess is that we are sending the association request (CMD_TX),
but its never seen OTA, its lost some where in between.
Ball goes to the FW :-).