From: Mohammed Shafi <shafi.wireless@gmail.com>
To: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org, ath9k-devel@lists.ath9k.org
Subject: Re: [RFC/WIP 09/22] ath9k: Initialize BTCOEX scheme using a helper
Date: Tue, 21 Feb 2012 16:41:40 +0530 [thread overview]
Message-ID: <CAD2nsn2bPffcbPcJAn1BG25Q-XTR8sJCHFwh_siGmneme7JpYQ@mail.gmail.com> (raw)
In-Reply-To: <20291.25199.584747.537695@gargle.gargle.HOWL>
On Tue, Feb 21, 2012 at 2:52 PM, Sujith Manoharan
<c_manoha@qca.qualcomm.com> wrote:
> Setting up the required scheme can be done as part of the
> BTCOEX initialization path and it doesn't belong in
> ath9k_hw_fill_cap_info() anyway.
>
> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
> ---
> drivers/net/wireless/ath/ath9k/btcoex.c | 34 +++++++++++++++++++++++++++++++
> drivers/net/wireless/ath/ath9k/btcoex.h | 1 +
> drivers/net/wireless/ath/ath9k/gpio.c | 2 +
> drivers/net/wireless/ath/ath9k/hw.c | 25 ----------------------
> 4 files changed, 37 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
> index 6566952..5365959 100644
> --- a/drivers/net/wireless/ath/ath9k/btcoex.c
> +++ b/drivers/net/wireless/ath/ath9k/btcoex.c
> @@ -98,6 +98,40 @@ void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
> }
> EXPORT_SYMBOL(ath9k_hw_init_btcoex_hw);
>
> +void ath9k_hw_btcoex_init_scheme(struct ath_hw *ah)
> +{
> + struct ath_common *common = ath9k_hw_common(ah);
> + struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
> +
> + /*
> + * Check if BTCOEX is globally disabled.
> + */
> + if (!common->btcoex_enabled) {
> + btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
> + return;
> + }
> +
> + if (AR_SREV_9462(ah)) {
> + btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
> + } else if (AR_SREV_9300_20_OR_LATER(ah)) {
> + btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
> + btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
> + btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
> + btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO_9300;
> + } else if (AR_SREV_9280_20_OR_LATER(ah)) {
> + btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9280;
> + btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9280;
> +
> + if (AR_SREV_9285(ah)) {
> + btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
> + btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO_9285;
> + } else {
> + btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
> + }
> + }
> +}
> +EXPORT_SYMBOL(ath9k_hw_btcoex_init_scheme);
> +
> void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah)
> {
> struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
> diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
> index 0cb15cd..10627b4 100644
> --- a/drivers/net/wireless/ath/ath9k/btcoex.h
> +++ b/drivers/net/wireless/ath/ath9k/btcoex.h
> @@ -97,6 +97,7 @@ struct ath_btcoex_hw {
> u32 wlan_weight[AR9300_NUM_WLAN_WEIGHTS];
> };
>
> +void ath9k_hw_btcoex_init_scheme(struct ath_hw *ah);
> void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah);
> void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah);
> void ath9k_hw_btcoex_init_mci(struct ath_hw *ah);
> diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
> index 3ab62af..c2238ff 100644
> --- a/drivers/net/wireless/ath/ath9k/gpio.c
> +++ b/drivers/net/wireless/ath/ath9k/gpio.c
> @@ -391,6 +391,8 @@ int ath9k_init_btcoex(struct ath_softc *sc)
> struct ath_hw *ah = sc->sc_ah;
> int r;
>
> + ath9k_hw_btcoex_init_scheme(ah);
> +
> switch (ath9k_hw_get_btcoex_scheme(sc->sc_ah)) {
> case ATH_BTCOEX_CFG_NONE:
> break;
> diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
> index cb46d41..f4b121f 100644
> --- a/drivers/net/wireless/ath/ath9k/hw.c
> +++ b/drivers/net/wireless/ath/ath9k/hw.c
> @@ -2303,7 +2303,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
> struct ath9k_hw_capabilities *pCap = &ah->caps;
> struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
> struct ath_common *common = ath9k_hw_common(ah);
> - struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
> unsigned int chip_chainmask;
>
> u16 eeval;
> @@ -2422,30 +2421,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
> else
> pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
>
> - if (common->btcoex_enabled) {
> - if (AR_SREV_9462(ah))
> - btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
> - else if (AR_SREV_9300_20_OR_LATER(ah)) {
> - btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
> - btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
> - btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
> - btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO_9300;
> - } else if (AR_SREV_9280_20_OR_LATER(ah)) {
> - btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9280;
> - btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9280;
> -
> - if (AR_SREV_9285(ah)) {
> - btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
> - btcoex_hw->btpriority_gpio =
> - ATH_BTPRIORITY_GPIO_9285;
> - } else {
> - btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
> - }
> - }
> - } else {
> - btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
> - }
> -
> if (AR_SREV_9300_20_OR_LATER(ah)) {
> pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_FASTCLOCK;
> if (!AR_SREV_9330(ah) && !AR_SREV_9485(ah))
> --
> 1.7.9.1
>
is it possible to move it to gpio.c, except we are initializing btcoex
related GPIO pins so logically gpio.c could be a good idea. pls let me
know if i had missed something
--
thanks,
shafi
next prev parent reply other threads:[~2012-02-21 11:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 9:22 [RFC/WIP 09/22] ath9k: Initialize BTCOEX scheme using a helper Sujith Manoharan
2012-02-21 11:11 ` Mohammed Shafi [this message]
2012-02-21 14:13 ` Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAD2nsn2bPffcbPcJAn1BG25Q-XTR8sJCHFwh_siGmneme7JpYQ@mail.gmail.com \
--to=shafi.wireless@gmail.com \
--cc=ath9k-devel@lists.ath9k.org \
--cc=c_manoha@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).