[PATCH v2 00/10] nl80211: Fix checkpatch.pl issues

[PATCH v2 00/10] nl80211: Fix checkpatch.pl issues

[Kirtika Ruchandani]

This patch-set attempts to fix checkpatch.pl issues found in nl80211.c.
Each patch describes the specific warnings/checks/errors it addresses.
This patch-set ignores 'line over 80 chars' warnings, except for 2 cases.
Please check for issues with the 'fixes' for 'alignment should match
open parenthesis'. Some of them do not display correctly with git diff.
This patch-set removes 3 errors, 66 warnings and 46 checks.

Kirtika Ruchandani (10):
  nl80211: Fix checkpatch warnings
  nl80211: Fix checkpatch warnings about blank lines
  nl80211: Prefer ether_addr_copy
  nl80211: Fix checkpatch.pl warning about braces
  nl80211: Fix checkpatch.pl NULL comparison warning
  nl80211: Various checkpatch.pl spacing fixes
  nl80211: Avoid multiple assignments on same line
  nl80211: Fix spelling
  nl80211: Fix checkpatch.pl warning
  nl80211: Prefer kcalloc over kzalloc

Changes in v2:
- Break down patch into smaller independent patches as suggested by Julian 
  Calaby.This breaks down patch 3/3 in set v1 into patches 3-10 of v2.

 net/wireless/nl80211.c | 301 ++++++++++++++++++++++---------------------------
 1 file changed, 136 insertions(+), 165 deletions(-)

-- 
2.8.0.rc3.226.g39d4020

[PATCH v2 01/10] nl80211: Fix checkpatch warnings

[Kirtika Ruchandani]

This patch fixes the following checkpatch.pl warnings about
comments in nl80211.c :
- networking block comments don't use an empty '/*' line
- block comments use a trailing '*/' on a separate line

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 129 +++++++++++++++++--------------------------------
 1 file changed, 45 insertions(+), 84 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d759901..50a0de0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -196,8 +196,7 @@ __cfg80211_rdev_from_attrs(struct net *netns, struct nlattr **attrs)
 	return rdev;
 }

-/*
- * This function returns a pointer to the driver
+/* This function returns a pointer to the driver
  * that the genl_info item that is passed refers to.
  *
  * The result of this can be a PTR_ERR and hence must
@@ -1624,8 +1623,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			goto nla_put_failure;

 		features = rdev->wiphy.features;
-		/*
-		 * We can only add the per-channel limit information if the
+		/* We can only add the per-channel limit information if the
 		 * dump is split, otherwise it makes it too big. Therefore
 		 * only advertise it in that case.
 		 */
@@ -1646,8 +1644,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 				rdev->wiphy.max_acl_mac_addrs))
 			goto nla_put_failure;

-		/*
-		 * Any information below this point is only available to
+		/* Any information below this point is only available to
 		 * applications that can deal with it being split. This
 		 * helps ensure that newly added capabilities don't break
 		 * older tools by overrunning their buffers.
@@ -1847,8 +1844,7 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
 						 cb->nlh->nlmsg_seq,
 						 NLM_F_MULTI, state);
 			if (ret < 0) {
-				/*
-				 * If sending the wiphy data didn't fit (ENOBUFS
+				/* If sending the wiphy data didn't fit (ENOBUFS
 				 * or EMSGSIZE returned), this SKB is still
 				 * empty (so it's not too big because another
 				 * wiphy dataset is already in the skb) and
@@ -1937,8 +1933,7 @@ static int parse_txq_params(struct nlattr *tb[],

 static bool nl80211_can_set_dev_channel(struct wireless_dev *wdev)
 {
-	/*
-	 * You can only set the channel explicitly for WDS interfaces,
+	/* You can only set the channel explicitly for WDS interfaces,
 	 * all others have their channel managed via their respective
 	 * "establish a connection" command (connect, join, ...)
 	 *
@@ -2131,8 +2126,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)

 	ASSERT_RTNL();

-	/*
-	 * Try to find the wiphy and netdev. Normally this
+	/* Try to find the wiphy and netdev. Normally this
 	 * function shouldn't need the netdev, but this is
 	 * done for backward compatibility -- previously
 	 * setting the channel was done per wiphy, but now
@@ -2162,8 +2156,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	} else
 		wdev = netdev->ieee80211_ptr;

-	/*
-	 * end workaround code, by now the rdev is available
+	/* end workaround code, by now the rdev is available
 	 * and locked, and wdev may or may not be NULL.
 	 */

@@ -2260,7 +2253,8 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]);

 		/* reject antenna configurations which don't match the
-		 * available antenna masks, except for the "all" mask */
+		 * available antenna masks, except for the "all" mask
+		 */
 		if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas_tx)) ||
 		    (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas_rx)))
 			return -EINVAL;
@@ -2300,8 +2294,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 			return -EINVAL;

 		if (frag_threshold != (u32) -1) {
-			/*
-			 * Fragments (apart from the last one) are required to
+			/* Fragments (apart from the last one) are required to
 			 * have even length. Make the fragmentation code
 			 * simpler by stripping LSB should someone try to use
 			 * odd threshold value.
@@ -2751,8 +2744,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 		wdev_unlock(wdev);
 		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
-		/*
-		 * P2P Device doesn't have a netdev, so doesn't go
+		/* P2P Device doesn't have a netdev, so doesn't go
 		 * through the netdev notifier and must be added here
 		 */
 		mutex_init(&wdev->mtx);
@@ -2808,8 +2800,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
 		msg = NULL;
 	}

-	/*
-	 * If we remove a wireless device without a netdev then clear
+	/* If we remove a wireless device without a netdev then clear
 	 * user_ptr[1] so that nl80211_post_doit won't dereference it
 	 * to check if it needs to do dev_put(). Otherwise it crashes
 	 * since the wdev has been freed, unlike with a netdev where
@@ -3160,8 +3151,7 @@ static int validate_acl_mac_addrs(struct nlattr *nl_attr)
 	return n_entries;
 }

-/*
- * This function parses ACL information and allocates memory for ACL data.
+/* This function parses ACL information and allocates memory for ACL data.
  * On successful return, the calling function is responsible to free the
  * ACL buffer returned by this function.
  */
@@ -3377,8 +3367,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;

-	/*
-	 * In theory, some of these attributes should be required here
+	/* In theory, some of these attributes should be required here
 	 * but since they were not used when the command was originally
 	 * added, keep them optional for old user space programs to let
 	 * them continue to work with drivers that do not need the
@@ -3567,8 +3556,7 @@ static int parse_station_flags(struct genl_info *info,
 	struct nlattr *nla;
 	int flag;

-	/*
-	 * Try parsing the new attribute first so userspace
+	/* Try parsing the new attribute first so userspace
 	 * can specify both for older kernels.
 	 */
 	nla = info->attrs[NL80211_ATTR_STA_FLAGS2];
@@ -3595,8 +3583,7 @@ static int parse_station_flags(struct genl_info *info,
 			     nla, sta_flags_policy))
 		return -EINVAL;

-	/*
-	 * Only allow certain flags for interface types so that
+	/* Only allow certain flags for interface types so that
 	 * other attributes are silently ignored. Remember that
 	 * this is backward compatibility code with old userspace
 	 * and shouldn't be hit in other cases anyway.
@@ -4032,8 +4019,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
 	switch (statype) {
 	case CFG80211_STA_MESH_PEER_KERNEL:
 	case CFG80211_STA_MESH_PEER_USER:
-		/*
-		 * No ignoring the TDLS flag here -- the userspace mesh
+		/* No ignoring the TDLS flag here -- the userspace mesh
 		 * code doesn't have the bug of including TDLS in the
 		 * mask everywhere.
 		 */
@@ -4065,8 +4051,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
 		/* TDLS can't be set, ... */
 		if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
 			return -EINVAL;
-		/*
-		 * ... but don't bother the driver with it. This works around
+		/* ... but don't bother the driver with it. This works around
 		 * a hostapd/wpa_supplicant issue -- it always includes the
 		 * TLDS_PEER flag in the mask even for AP mode.
 		 */
@@ -4151,8 +4136,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
 }
 EXPORT_SYMBOL(cfg80211_check_station_change);

-/*
- * Get vlan interface making sure it is running and on the right wiphy.
+/* Get vlan interface making sure it is running and on the right wiphy.
  */
 static struct net_device *get_vlan(struct genl_info *info,
 				   struct cfg80211_registered_device *rdev)
@@ -4239,8 +4223,7 @@ static int nl80211_parse_sta_channel_info(struct genl_info *info,
 		     nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
 		params->supported_channels_len =
 		     nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]);
-		/*
-		 * Need to include at least one (first channel, number of
+		/* Need to include at least one (first channel, number of
 		 * channels) tuple for each subband, and must have proper
 		 * tuples for the rest of the data as well.
 		 */
@@ -4255,8 +4238,7 @@ static int nl80211_parse_sta_channel_info(struct genl_info *info,
 		 nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
 		params->supported_oper_classes_len =
 		  nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES]);
-		/*
-		 * The value of the Length field of the Supported Operating
+		/* The value of the Length field of the Supported Operating
 		 * Classes element is between 2 and 253.
 		 */
 		if (params->supported_oper_classes_len < 2 ||
@@ -4300,8 +4282,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 	if (!rdev->ops->change_station)
 		return -EOPNOTSUPP;

-	/*
-	 * AID and listen_interval properties can be set only for unassociated
+	/* AID and listen_interval properties can be set only for unassociated
 	 * station. Include these parameters here and will check them in
 	 * cfg80211_check_station_change().
 	 */
@@ -4458,8 +4439,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)

 		params.support_p2p_ps = tmp;
 	} else {
-		/*
-		 * if not specified, assume it's supported for P2P GO interface,
+		/* if not specified, assume it's supported for P2P GO interface,
 		 * and is NOT supported for AP interface
 		 */
 		params.support_p2p_ps =
@@ -4604,8 +4584,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 		/* ... with external setup is supported */
 		if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
 			return -EOPNOTSUPP;
-		/*
-		 * Older wpa_supplicant versions always mark the TDLS peer
+		/* Older wpa_supplicant versions always mark the TDLS peer
 		 * as authorized, but it shouldn't yet be.
 		 */
 		params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_AUTHORIZED);
@@ -5054,8 +5033,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
 	u32 owner_nlportid;


-	/*
-	 * You should only get this when cfg80211 hasn't yet initialized
+	/* You should only get this when cfg80211 hasn't yet initialized
 	 * completely when built-in to the kernel right between the time
 	 * window between nl80211_init() and regulatory_init(), if that is
 	 * even possible.
@@ -5271,7 +5249,8 @@ do {									    \
 		return -EINVAL;

 	/* This makes sure that there aren't more than 32 mesh config
-	 * parameters (otherwise our bitfield scheme would not work.) */
+	 * parameters (otherwise our bitfield scheme would not work.)
+	 */
 	BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);

 	/* Fill in the params struct */
@@ -5770,8 +5749,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
 	rd->alpha2[0] = alpha2[0];
 	rd->alpha2[1] = alpha2[1];

-	/*
-	 * Disable DFS master mode if the DFS region was
+	/* Disable DFS master mode if the DFS region was
 	 * not supported or known on this kernel.
 	 */
 	if (reg_supported_dfs_region(dfs_region))
@@ -5813,8 +5791,7 @@ static int validate_scan_freqs(struct nlattr *freqs)

 	nla_for_each_nested(attr1, freqs, tmp1) {
 		n_channels++;
-		/*
-		 * Some hardware has a limited channel list for
+		/* Some hardware has a limited channel list for
 		 * scanning, and it is pretty much nonsensical
 		 * to scan for a channel twice, so disallow that
 		 * and don't require drivers to check that the
@@ -5924,8 +5901,7 @@ static int nl80211_parse_random_mac(struct nlattr **attrs,
 	    is_multicast_ether_addr(mac_addr))
 		return -EINVAL;

-	/*
-	 * allow users to pass a MAC address that has bits set outside
+	/* allow users to pass a MAC address that has bits set outside
 	 * of the mask, but don't bother drivers with having to deal
 	 * with such bits
 	 */
@@ -6192,8 +6168,7 @@ nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
 	if (!attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
 		u32 interval;

-		/*
-		 * If scan plans are not specified,
+		/* If scan plans are not specified,
 		 * %NL80211_ATTR_SCHED_SCAN_INTERVAL must be specified. In this
 		 * case one scan plan will be set with the specified scan
 		 * interval and infinite number of iterations.
@@ -6248,8 +6223,7 @@ nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
 			     wiphy->max_sched_scan_plan_iterations))
 				return -EINVAL;
 		} else if (i < n_plans - 1) {
-			/*
-			 * All scan plans but the last one must specify
+			/* All scan plans but the last one must specify
 			 * a finite number of iterations
 			 */
 			return -EINVAL;
@@ -6258,8 +6232,7 @@ nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
 		i++;
 	}

-	/*
-	 * The last scan plan must not specify the number of
+	/* The last scan plan must not specify the number of
 	 * iterations, it is supposed to run infinitely
 	 */
 	if (request->scan_plans[n_plans - 1].iterations)
@@ -6300,8 +6273,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 	if (n_ssids > wiphy->max_sched_scan_ssids)
 		return ERR_PTR(-EINVAL);

-	/*
-	 * First, count the number of 'real' matchsets. Due to an issue with
+	/* First, count the number of 'real' matchsets. Due to an issue with
 	 * the old implementation, matchsets containing only the RSSI attribute
 	 * (NL80211_SCHED_SCAN_MATCH_ATTR_RSSI) are considered as the 'default'
 	 * RSSI for all matchsets, rather than their own matchset for reporting
@@ -6347,8 +6319,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 		return ERR_PTR(-EINVAL);

 	if (attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
-		/*
-		 * NL80211_ATTR_SCHED_SCAN_INTERVAL must not be specified since
+		/* NL80211_ATTR_SCHED_SCAN_INTERVAL must not be specified since
 		 * each scan plan already specifies its own interval
 		 */
 		if (attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
@@ -6358,8 +6329,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 				    attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp)
 			n_plans++;
 	} else {
-		/*
-		 * The scan interval attribute is kept for backward
+		/* The scan interval attribute is kept for backward
 		 * compatibility. If no scan plans are specified and sched scan
 		 * interval is specified, one scan plan will be set with this
 		 * scan interval and infinite number of iterations.
@@ -7255,8 +7225,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)

 	local_state_change = !!info->attrs[NL80211_ATTR_LOCAL_STATE_CHANGE];

-	/*
-	 * Since we no longer track auth state, ignore
+	/* Since we no longer track auth state, ignore
 	 * requests to only change local state.
 	 */
 	if (local_state_change)
@@ -7918,8 +7887,7 @@ static int nl80211_testmode_dump(struct sk_buff *skb,
 	rtnl_lock();

 	if (cb->args[0]) {
-		/*
-		 * 0 is a valid index, but not valid for args[0],
+		/* 0 is a valid index, but not valid for args[0],
 		 * so we need to offset by 1.
 		 */
 		phy_idx = cb->args[0] - 1;
@@ -8364,8 +8332,7 @@ static int nl80211_remain_on_channel(struct sk_buff *skb,
 	    !(rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL))
 		return -EOPNOTSUPP;

-	/*
-	 * We should be on that channel for at least a minimum amount of
+	/* We should be on that channel for at least a minimum amount of
 	 * time (10ms) but no longer than the driver supports.
 	 */
 	if (duration < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
@@ -8586,8 +8553,7 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 	if (!info->attrs[NL80211_ATTR_TX_RATES])
 		goto out;

-	/*
-	 * The nested attribute uses enum nl80211_band as the index. This maps
+	/* The nested attribute uses enum nl80211_band as the index. This maps
 	 * directly to the enum nl80211_band values used in cfg80211.
 	 */
 	BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
@@ -8736,8 +8702,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 			return -EINVAL;
 		params.wait = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);

-		/*
-		 * We should wait on the channel for at least a minimum amount
+		/* We should wait on the channel for at least a minimum amount
 		 * of time (10ms) but no longer than the driver supports.
 		 */
 		if (params.wait < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
@@ -10758,8 +10723,7 @@ static int nl80211_tdls_channel_switch(struct sk_buff *skb,
 	if (err)
 		return err;

-	/*
-	 * Don't allow wide channels on the 2.4Ghz band, as per IEEE802.11-2012
+	/* Don't allow wide channels on the 2.4Ghz band, as per IEEE802.11-2012
 	 * section 10.22.6.2.1. Disallow 5/10Mhz channels as well for now, the
 	 * specification is not defined for them.
 	 */
@@ -11899,8 +11863,7 @@ nla_put_failure:
 	return false;
 }

-/*
- * This can happen on global regulatory changes or device specific settings
+/* This can happen on global regulatory changes or device specific settings
  * based on custom regulatory domains.
  */
 void nl80211_common_reg_change_event(enum nl80211_commands cmd_id,
@@ -12337,8 +12300,7 @@ void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
 		return;
 	}

-	/*
-	 * Since we are applying the beacon hint to a wiphy we know its
+	/* Since we are applying the beacon hint to a wiphy we know its
 	 * wiphy_idx is valid
 	 */
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy)))
@@ -13453,8 +13415,7 @@ static int nl80211_netlink_notify(struct notifier_block * nb,

 	rcu_read_unlock();

-	/*
-	 * It is possible that the user space process that is controlling the
+	/* It is possible that the user space process that is controlling the
 	 * indoor setting disappeared, so notify the regulatory core.
 	 */
 	regulatory_netlink_notify(notify->portid);
--
2.8.0.rc3.226.g39d4020

[PATCH v2 02/10] nl80211: Fix checkpatch warnings about blank lines

[Kirtika Ruchandani]

This patch fixes the following checkpatch.pl issues -
- Please don't use multiple blank lines
- Blank lines aren't necessary before a close brace
- Missing a blank line after declarations

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 50a0de0..cd422bd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -167,6 +167,7 @@ __cfg80211_rdev_from_attrs(struct net *netns, struct nlattr **attrs)

 	if (attrs[NL80211_ATTR_IFINDEX]) {
 		int ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
+
 		netdev = __dev_get_by_index(netns, ifindex);
 		if (netdev) {
 			if (netdev->ieee80211_ptr)
@@ -730,6 +731,7 @@ static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)

 	if (tb[NL80211_KEY_DEFAULT_TYPES]) {
 		struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
+
 		err = nla_parse_nested(kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1,
 				       tb[NL80211_KEY_DEFAULT_TYPES],
 				       nl80211_key_default_policy);
@@ -1381,6 +1383,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		    rdev->ops->get_antenna) {
 			u32 tx_ant = 0, rx_ant = 0;
 			int res;
+
 			res = rdev_get_antenna(rdev, &tx_ant, &rx_ant);
 			if (!res) {
 				if (nla_put_u32(msg,
@@ -2111,7 +2114,6 @@ static int nl80211_set_wds_peer(struct sk_buff *skb, struct genl_info *info)
 	return rdev_set_wds_peer(rdev, dev, bssid);
 }

-
 static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
@@ -2244,6 +2246,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
 	    info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
 		u32 tx_ant, rx_ant;
+
 		if ((!rdev->wiphy.available_antennas_tx &&
 		     !rdev->wiphy.available_antennas_rx) ||
 		    !rdev->ops->set_antenna)
@@ -2910,6 +2913,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 	pairwise = !!mac_addr;
 	if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
 		u32 kt = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
+
 		if (kt >= NUM_NL80211_KEYTYPES)
 			return -EINVAL;
 		if (kt != NL80211_KEYTYPE_GROUP &&
@@ -3949,7 +3953,6 @@ static int nl80211_dump_station(struct sk_buff *skb,
 		sta_idx++;
 	}

-
  out:
 	cb->args[2] = sta_idx;
 	err = skb->len;
@@ -4742,7 +4745,6 @@ static int nl80211_dump_mpath(struct sk_buff *skb,
 		path_idx++;
 	}

-
  out:
 	cb->args[2] = path_idx;
 	err = skb->len;
@@ -5032,7 +5034,6 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
 	enum nl80211_user_reg_hint_type user_reg_hint_type;
 	u32 owner_nlportid;

-
 	/* You should only get this when cfg80211 hasn't yet initialized
 	 * completely when built-in to the kernel right between the time
 	 * window between nl80211_init() and regulatory_init(), if that is
@@ -5240,7 +5241,6 @@ do {									    \
 	}								    \
 } while (0)

-
 	if (!info->attrs[NL80211_ATTR_MESH_CONFIG])
 		return -EINVAL;
 	if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
@@ -5388,7 +5388,6 @@ static int nl80211_parse_mesh_setup(struct genl_info *info,
 		 IEEE80211_PATH_METRIC_VENDOR :
 		 IEEE80211_PATH_METRIC_AIRTIME;

-
 	if (tb[NL80211_MESH_SETUP_IE]) {
 		struct nlattr *ieattr =
 			tb[NL80211_MESH_SETUP_IE];
@@ -6009,6 +6008,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 		/* all channels */
 		for (band = 0; band < NUM_NL80211_BANDS; band++) {
 			int j;
+
 			if (!wiphy->bands[band])
 				continue;
 			for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -6412,6 +6412,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 		/* all channels */
 		for (band = 0; band < NUM_NL80211_BANDS; band++) {
 			int j;
+
 			if (!wiphy->bands[band])
 				continue;
 			for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -7174,6 +7175,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
 	if (key.idx >= 0) {
 		int i;
 		bool ok = false;
+
 		for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) {
 			if (key.p.cipher == rdev->wiphy.cipher_suites[i]) {
 				ok = true;
@@ -7251,6 +7253,7 @@ static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,

 	if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
 		u16 proto;
+
 		proto = nla_get_u16(
 			info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
 		settings->control_port_ethertype = cpu_to_be16(proto);
@@ -8402,6 +8405,7 @@ static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
 	for (i = 0; i < rates_len; i++) {
 		int rate = (rates[i] & 0x7f) * 5;
 		int ridx;
+
 		for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
 			struct ieee80211_rate *srate =
 				&sband->bitrates[ridx];
@@ -8708,7 +8712,6 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 		if (params.wait < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
 		    params.wait > rdev->wiphy.max_remain_on_channel_duration)
 			return -EINVAL;
-
 	}

 	params.offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
@@ -10555,7 +10558,6 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
 }
 EXPORT_SYMBOL_GPL(cfg80211_vendor_cmd_reply);

-
 static int nl80211_set_qos_map(struct sk_buff *skb,
 			       struct genl_info *info)
 {
@@ -12089,7 +12091,6 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
  nla_put_failure:
 	genlmsg_cancel(msg, hdr);
 	nlmsg_free(msg);
-
 }

 void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
@@ -12128,7 +12129,6 @@ void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
  nla_put_failure:
 	genlmsg_cancel(msg, hdr);
 	nlmsg_free(msg);
-
 }

 void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
@@ -12166,7 +12166,6 @@ void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
  nla_put_failure:
 	genlmsg_cancel(msg, hdr);
 	nlmsg_free(msg);
-
 }

 void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
@@ -13506,7 +13505,6 @@ void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp)
 	if (hdr)
 		genlmsg_cancel(msg, hdr);
 	nlmsg_free(msg);
-
 }
 EXPORT_SYMBOL(cfg80211_crit_proto_stopped);

--
2.8.0.rc3.226.g39d4020

[PATCH v2 03/10] nl80211: Prefer ether_addr_copy

[Kirtika Ruchandani]

This patch fixes the checkpatch,pl to prefer ether_addr_copy
over memcpy.

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index cd422bd..34b8fbe 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3194,7 +3194,7 @@ static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy,
 		return ERR_PTR(-ENOMEM);

 	nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) {
-		memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN);
+		ether_addr_copy(acl->mac_addrs[i].addr, nla_data(attr));
 		i++;
 	}

@@ -5892,8 +5892,8 @@ static int nl80211_parse_random_mac(struct nlattr **attrs,
 	if (!attrs[NL80211_ATTR_MAC] || !attrs[NL80211_ATTR_MAC_MASK])
 		return -EINVAL;

-	memcpy(mac_addr, nla_data(attrs[NL80211_ATTR_MAC]), ETH_ALEN);
-	memcpy(mac_addr_mask, nla_data(attrs[NL80211_ATTR_MAC_MASK]), ETH_ALEN);
+	ether_addr_copy(mac_addr, nla_data(attrs[NL80211_ATTR_MAC]));
+	ether_addr_copy(mac_addr_mask, nla_data(attrs[NL80211_ATTR_MAC_MASK]));

 	/* don't allow or configure an mcast address */
 	if (!is_multicast_ether_addr(mac_addr_mask) ||
@@ -9405,8 +9405,7 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
 		return -ENOMEM;
 	cfg->src = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_SRC_IPV4]);
 	cfg->dst = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_DST_IPV4]);
-	memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]),
-	       ETH_ALEN);
+	ether_addr_copy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]));
 	if (tb[NL80211_WOWLAN_TCP_SRC_PORT])
 		port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]);
 	else
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 03/10] nl80211: Prefer ether_addr_copy

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:52 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the checkpatch,pl to prefer ether_addr_copy
> over memcpy.
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

This looks right to me, but doesn't ether_addr_copy() have alignment
requirements? Could someone more familiar with that review these
changes to ensure they're met?

Thanks,

Julian Calaby

> ---
>  net/wireless/nl80211.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index cd422bd..34b8fbe 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -3194,7 +3194,7 @@ static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy,
>                 return ERR_PTR(-ENOMEM);
>
>         nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) {
> -               memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN);
> +               ether_addr_copy(acl->mac_addrs[i].addr, nla_data(attr));
>                 i++;
>         }
>
> @@ -5892,8 +5892,8 @@ static int nl80211_parse_random_mac(struct nlattr **attrs,
>         if (!attrs[NL80211_ATTR_MAC] || !attrs[NL80211_ATTR_MAC_MASK])
>                 return -EINVAL;
>
> -       memcpy(mac_addr, nla_data(attrs[NL80211_ATTR_MAC]), ETH_ALEN);
> -       memcpy(mac_addr_mask, nla_data(attrs[NL80211_ATTR_MAC_MASK]), ETH_ALEN);
> +       ether_addr_copy(mac_addr, nla_data(attrs[NL80211_ATTR_MAC]));
> +       ether_addr_copy(mac_addr_mask, nla_data(attrs[NL80211_ATTR_MAC_MASK]));
>
>         /* don't allow or configure an mcast address */
>         if (!is_multicast_ether_addr(mac_addr_mask) ||
> @@ -9405,8 +9405,7 @@ static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev,
>                 return -ENOMEM;
>         cfg->src = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_SRC_IPV4]);
>         cfg->dst = nla_get_in_addr(tb[NL80211_WOWLAN_TCP_DST_IPV4]);
> -       memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]),
> -              ETH_ALEN);
> +       ether_addr_copy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]));
>         if (tb[NL80211_WOWLAN_TCP_SRC_PORT])
>                 port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]);
>         else
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH v2 03/10] nl80211: Prefer ether_addr_copy

[Kirtika Ruchandani]

> This looks right to me, but doesn't ether_addr_copy() have alignment
> requirements? Could someone more familiar with that review these
> changes to ensure they're met?

Thanks for catching this.
The requirement is to be __aligned(2). I've added 4 instances of
ether_addr_copy with 8 addresses as arguments.  Of these, the 4
src arguments are really the same type (i.e. nla_data acting on a
const nlattr*), so I'll try to reason about the 5 total cases below -
1. cfg->dst_mac should be 16-bit aligned due to the layout of
struct cfg80211_wowlan_tcp. Its offset is 10 or 12 bytes in the
structure depending on the system.
2 and 3. For mac_addr and mac_addr_mask, nl80211_parse_random_mac
takes these in as u8* (and hence does not guarantee alignment?)
Both the callers of this function today pass in arguments that are
explicitly __aligned(2). But this cannot be said of future potential callers
- so perhaps my patch introduces a bug?
4. Based on struct cfg80211_acl_data, acl->mac_addrs[i] should be not
guaranteed to be __aligned(2).
5. For all the nla_data src arguments, the nla_data function returns
((char*) foo + 5) for pointer foo. So likely not __aligned(2).

Based on 3, 4 and 5, this patch should be revoked, but it would be nice
to have a confirmation from someone else.

Re: [PATCH v2 03/10] nl80211: Prefer ether_addr_copy

[Johannes Berg]

> The requirement is to be __aligned(2). I've added 4 instances of
> ether_addr_copy with 8 addresses as arguments.  Of these, the 4
> src arguments are really the same type (i.e. nla_data acting on a
> const nlattr*), so I'll try to reason about the 5 total cases below -
> 1. cfg->dst_mac should be 16-bit aligned due to the layout of
> struct cfg80211_wowlan_tcp. Its offset is 10 or 12 bytes in the
> structure depending on the system.

I wouldn't want to rely on that, since internal structures can be
changed pretty easily. If necessary, add __aligned(2) to the struct
members where appropriate.

> 2 and 3. For mac_addr and mac_addr_mask, nl80211_parse_random_mac
> takes these in as u8* (and hence does not guarantee alignment?)
> Both the callers of this function today pass in arguments that are
> explicitly __aligned(2). But this cannot be said of future potential
> callers
> - so perhaps my patch introduces a bug?

That should be documented, but it's also pretty tricky to
review/maintain that.

I general, I don't really see much reason to use ether_addr_copy() in
any of these code paths - it's not really a performance thing (in part
due to the alignment, ether_addr_copy can be faster)

> 4. Based on struct cfg80211_acl_data, acl->mac_addrs[i] should be not
> guaranteed to be __aligned(2).

See above.

> 5. For all the nla_data src arguments, the nla_data function returns
> ((char*) foo + 5) for pointer foo. So likely not __aligned(2).

Those should be aligned since the data is copied into an SKB, and +5
doesn't seem right - nla_data() should be +4.

johannes

[PATCH v2 04/10] nl80211: Fix checkpatch.pl warning about braces

[Kirtika Ruchandani]

This patch fixes the following checkpatch,pl warning -
- braces {} should be used on all arms of this statement.

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 34b8fbe..945405d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -870,8 +870,9 @@ nl80211_parse_connkeys(struct cfg80211_registered_device *rdev,
 			result->def = parse.idx;
 			if (!parse.def_uni || !parse.def_multi)
 				goto error;
-		} else if (parse.defmgmt)
+		} else if (parse.defmgmt) {
 			goto error;
+		}
 		err = cfg80211_validate_key_settings(rdev, &parse.p,
 						     parse.idx, false, NULL);
 		if (err)
@@ -1401,8 +1402,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			break;
 	case 2:
 		if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
-					rdev->wiphy.interface_modes))
-				goto nla_put_failure;
+					rdev->wiphy.interface_modes)) {
+			goto nla_put_failure;
+		}
 		state->split_start++;
 		if (state->split)
 			break;
@@ -2155,8 +2157,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		wdev = NULL;
 		netdev = NULL;
 		result = 0;
-	} else
+	} else {
 		wdev = netdev->ieee80211_ptr;
+	}

 	/* end workaround code, by now the rdev is available
 	 * and locked, and wdev may or may not be NULL.
@@ -3403,8 +3406,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		if (!nl80211_valid_auth_type(rdev, params.auth_type,
 					     NL80211_CMD_START_AP))
 			return -EINVAL;
-	} else
+	} else {
 		params.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+	}

 	err = nl80211_crypto_settings(rdev, info, &params.crypto,
 				      NL80211_MAX_NR_CIPHER_SUITES);
@@ -3450,8 +3454,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 			return err;
 	} else if (wdev->preset_chandef.chan) {
 		params.chandef = wdev->preset_chandef;
-	} else if (!nl80211_get_ap_channel(rdev, &params))
+	} else if (!nl80211_get_ap_channel(rdev, &params)) {
 		return -EINVAL;
+	}

 	if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params.chandef,
 					   wdev->iftype))
@@ -7262,8 +7267,9 @@ static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
 			return -EINVAL;
 		if (info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT])
 			settings->control_port_no_encrypt = true;
-	} else
+	} else {
 		settings->control_port_ethertype = cpu_to_be16(ETH_P_PAE);
+	}

 	if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
 		void *data;
@@ -7997,8 +8003,9 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
 		if (!nl80211_valid_auth_type(rdev, connect.auth_type,
 					     NL80211_CMD_CONNECT))
 			return -EINVAL;
-	} else
+	} else {
 		connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+	}

 	connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];

--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 04/10] nl80211: Fix checkpatch.pl warning about braces

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:52 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the following checkpatch,pl warning -
> - braces {} should be used on all arms of this statement.
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 23 +++++++++++++++--------
>  1 file changed, 15 insertions(+), 8 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 34b8fbe..945405d 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -870,8 +870,9 @@ nl80211_parse_connkeys(struct cfg80211_registered_device *rdev,
>                         result->def = parse.idx;
>                         if (!parse.def_uni || !parse.def_multi)
>                                 goto error;
> -               } else if (parse.defmgmt)
> +               } else if (parse.defmgmt) {
>                         goto error;
> +               }
>                 err = cfg80211_validate_key_settings(rdev, &parse.p,
>                                                      parse.idx, false, NULL);
>                 if (err)
> @@ -1401,8 +1402,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
>                         break;
>         case 2:
>                 if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
> -                                       rdev->wiphy.interface_modes))
> -                               goto nla_put_failure;
> +                                       rdev->wiphy.interface_modes)) {
> +                       goto nla_put_failure;
> +               }
>                 state->split_start++;
>                 if (state->split)
>                         break;
> @@ -2155,8 +2157,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
>                 wdev = NULL;
>                 netdev = NULL;
>                 result = 0;
> -       } else
> +       } else {
>                 wdev = netdev->ieee80211_ptr;
> +       }
>
>         /* end workaround code, by now the rdev is available
>          * and locked, and wdev may or may not be NULL.
> @@ -3403,8 +3406,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
>                 if (!nl80211_valid_auth_type(rdev, params.auth_type,
>                                              NL80211_CMD_START_AP))
>                         return -EINVAL;
> -       } else
> +       } else {
>                 params.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
> +       }
>
>         err = nl80211_crypto_settings(rdev, info, &params.crypto,
>                                       NL80211_MAX_NR_CIPHER_SUITES);
> @@ -3450,8 +3454,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
>                         return err;
>         } else if (wdev->preset_chandef.chan) {
>                 params.chandef = wdev->preset_chandef;
> -       } else if (!nl80211_get_ap_channel(rdev, &params))
> +       } else if (!nl80211_get_ap_channel(rdev, &params)) {
>                 return -EINVAL;
> +       }
>
>         if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, &params.chandef,
>                                            wdev->iftype))
> @@ -7262,8 +7267,9 @@ static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
>                         return -EINVAL;
>                 if (info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT])
>                         settings->control_port_no_encrypt = true;
> -       } else
> +       } else {
>                 settings->control_port_ethertype = cpu_to_be16(ETH_P_PAE);
> +       }
>
>         if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
>                 void *data;
> @@ -7997,8 +8003,9 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
>                 if (!nl80211_valid_auth_type(rdev, connect.auth_type,
>                                              NL80211_CMD_CONNECT))
>                         return -EINVAL;
> -       } else
> +       } else {
>                 connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
> +       }
>
>         connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];
>
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 05/10] nl80211: Fix checkpatch.pl NULL comparison warning

[Kirtika Ruchandani]

This patch fixes the warning - "comparison to NULL (foo == NULL)
could be written as (!foo)"

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 945405d..11cbf0b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -928,7 +928,7 @@ static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy,
 {
 	struct ieee80211_channel *chan;

-	if (tb == NULL)
+	if (!tb)
 		return NULL;
 	chan = ieee80211_get_channel(wiphy, nla_get_u32(tb));
 	if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
@@ -8575,7 +8575,7 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 		if (band < 0 || band >= NUM_NL80211_BANDS)
 			return -EINVAL;
 		sband = rdev->wiphy.bands[band];
-		if (sband == NULL)
+		if (!sband)
 			return -EINVAL;
 		err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
 				nla_len(tx_rates), nl80211_txattr_policy);
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 05/10] nl80211: Fix checkpatch.pl NULL comparison warning

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:52 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the warning - "comparison to NULL (foo == NULL)
> could be written as (!foo)"
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby

> ---
>  net/wireless/nl80211.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 945405d..11cbf0b 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -928,7 +928,7 @@ static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy,
>  {
>         struct ieee80211_channel *chan;
>
> -       if (tb == NULL)
> +       if (!tb)
>                 return NULL;
>         chan = ieee80211_get_channel(wiphy, nla_get_u32(tb));
>         if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
> @@ -8575,7 +8575,7 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
>                 if (band < 0 || band >= NUM_NL80211_BANDS)
>                         return -EINVAL;
>                 sband = rdev->wiphy.bands[band];
> -               if (sband == NULL)
> +               if (!sband)
>                         return -EINVAL;
>                 err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
>                                 nla_len(tx_rates), nl80211_txattr_policy);
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 06/10] nl80211: Various checkpatch.pl spacing fixes

[Kirtika Ruchandani]

This patch fixes the following spacing issues reported
by checkpatch.pl -
- space preferred around that <operator>
- no space needed after cast.
- Alignment should match open parenthesis
- suspect code indent for conditional statements
- Statements should start on a tabstop

This patch also contains two hunks to fix 'line over 80 characters',
that are spacing related.
All other instances of that warning have been ignored.

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 103 ++++++++++++++++++++++++++-----------------------
 1 file changed, 54 insertions(+), 49 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 11cbf0b..ad7cdce 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -39,10 +39,10 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,

 /* the netlink family */
 static struct genl_family nl80211_fam = {
-	.id = GENL_ID_GENERATE,		/* don't bother with a hardcoded ID */
-	.name = NL80211_GENL_NAME,	/* have users key off the name instead */
-	.hdrsize = 0,			/* no private header */
-	.version = 1,			/* no particular meaning now */
+	.id = GENL_ID_GENERATE,	    /* don't bother with a hardcoded ID */
+	.name = NL80211_GENL_NAME,  /* have users key off the name instead */
+	.hdrsize = 0,		    /* no private header */
+	.version = 1,		    /* no particular meaning now */
 	.maxattr = NL80211_ATTR_MAX,
 	.netnsok = true,
 	.pre_doit = nl80211_pre_doit,
@@ -213,7 +213,7 @@ cfg80211_get_dev_from_info(struct net *netns, struct genl_info *info)
 static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
-				      .len = 20-1 },
+				      .len = 20 - 1 },
 	[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },

 	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
@@ -231,7 +231,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {

 	[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
 	[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
-	[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
+	[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ - 1 },

 	[NL80211_ATTR_MAC] = { .len = ETH_ALEN },
 	[NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN },
@@ -967,7 +967,7 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
 	int i, j;

 	nl_combis = nla_nest_start(msg,
-				NL80211_ATTR_INTERFACE_COMBINATIONS);
+				   NL80211_ATTR_INTERFACE_COMBINATIONS);
 	if (!nl_combis)
 		goto nla_put_failure;

@@ -1012,9 +1012,9 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
 			goto nla_put_failure;
 		if (large &&
 		    (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
-				c->radar_detect_widths) ||
+				 c->radar_detect_widths) ||
 		     nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
-				c->radar_detect_regions)))
+				 c->radar_detect_regions)))
 			goto nla_put_failure;

 		nla_nest_end(msg, nl_combi);
@@ -1493,7 +1493,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,

 		i = 0;
 #define CMD(op, n)							\
-		 do {							\
+		do {							\
 			if (rdev->ops->op) {				\
 				i++;					\
 				if (nla_put_u32(msg, i, NL80211_CMD_ ## n)) \
@@ -1735,8 +1735,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			       rdev->wiphy.max_num_csa_counters))
 			goto nla_put_failure;

-		if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
-		    nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
+		if ((rdev->wiphy.regulatory_flags &
+		     REGULATORY_WIPHY_SELF_MANAGED) &&
+		     nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
 			goto nla_put_failure;

 		if (nla_put(msg, NL80211_ATTR_EXT_FEATURES,
@@ -2299,7 +2300,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 		if (frag_threshold < 256)
 			return -EINVAL;

-		if (frag_threshold != (u32) -1) {
+		if (frag_threshold != (u32)-1) {
 			/* Fragments (apart from the last one) are required to
 			 * have even length. Make the fragmentation code
 			 * simpler by stripping LSB should someone try to use
@@ -2406,7 +2407,8 @@ static int nl80211_send_chandef(struct sk_buff *msg,
 	return 0;
 }

-static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flags,
+static int nl80211_send_iface(struct sk_buff *msg,
+			      u32 portid, u32 seq, int flags,
 			      struct cfg80211_registered_device *rdev,
 			      struct wireless_dev *wdev, bool removal)
 {
@@ -2470,7 +2472,8 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flag
 	return -EMSGSIZE;
 }

-static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
+static int nl80211_dump_interface(struct sk_buff *skb,
+				  struct netlink_callback *cb)
 {
 	int wp_idx = 0;
 	int if_idx = 0;
@@ -2557,7 +2560,7 @@ static int parse_monitor_flags(struct nlattr *nla, u32 *mntrflags)

 	for (flag = 1; flag <= NL80211_MNTR_FLAG_MAX; flag++)
 		if (flags[flag])
-			*mntrflags |= (1<<flag);
+			*mntrflags |= (1 << flag);

 	return 0;
 }
@@ -2722,9 +2725,9 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;

 	wdev = rdev_add_virtual_intf(rdev,
-				nla_data(info->attrs[NL80211_ATTR_IFNAME]),
-				NET_NAME_USER, type, err ? NULL : &flags,
-				&params);
+				     nla_data(info->attrs[NL80211_ATTR_IFNAME]),
+				     NET_NAME_USER, type, err ? NULL : &flags,
+				     &params);
 	if (WARN_ON(!wdev)) {
 		nlmsg_free(msg);
 		return -EPROTO;
@@ -3000,7 +3003,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 			goto out;

 		err = rdev_set_default_key(rdev, dev, key.idx,
-						 key.def_uni, key.def_multi);
+					   key.def_uni, key.def_multi);

 		if (err)
 			goto out;
@@ -3621,7 +3624,7 @@ static int parse_station_flags(struct genl_info *info,

 	for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++) {
 		if (flags[flag]) {
-			params->sta_flags_set |= (1<<flag);
+			params->sta_flags_set |= (1 << flag);

 			/* no longer support new API additions in old API */
 			if (flag > NL80211_STA_FLAG_MAX_OLD_API)
@@ -3949,10 +3952,10 @@ static int nl80211_dump_station(struct sk_buff *skb,
 			goto out_err;

 		if (nl80211_send_station(skb, NL80211_CMD_NEW_STATION,
-				NETLINK_CB(cb->skb).portid,
-				cb->nlh->nlmsg_seq, NLM_F_MULTI,
-				rdev, wdev->netdev, mac_addr,
-				&sinfo) < 0)
+					 NETLINK_CB(cb->skb).portid,
+					 cb->nlh->nlmsg_seq, NLM_F_MULTI,
+					 rdev, wdev->netdev, mac_addr,
+					 &sinfo) < 0)
 			goto out;

 		sta_idx++;
@@ -4224,7 +4227,7 @@ static int nl80211_parse_sta_wme(struct genl_info *info,
 }

 static int nl80211_parse_sta_channel_info(struct genl_info *info,
-				      struct station_parameters *params)
+					  struct station_parameters *params)
 {
 	if (info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]) {
 		params->supported_channels =
@@ -4655,9 +4658,9 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 }

 static int nl80211_send_mpath(struct sk_buff *msg, u32 portid, u32 seq,
-				int flags, struct net_device *dev,
-				u8 *dst, u8 *next_hop,
-				struct mpath_info *pinfo)
+			      int flags, struct net_device *dev,
+			      u8 *dst, u8 *next_hop,
+			      struct mpath_info *pinfo)
 {
 	void *hdr;
 	struct nlattr *pinfoattr;
@@ -4790,7 +4793,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 		return -ENOMEM;

 	if (nl80211_send_mpath(msg, info->snd_portid, info->snd_seq, 0,
-				 dev, dst, next_hop, &pinfo) < 0) {
+			       dev, dst, next_hop, &pinfo) < 0) {
 		nlmsg_free(msg);
 		return -ENOBUFS;
 	}
@@ -5185,7 +5188,8 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
 	return -ENOBUFS;
 }

-static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] = {
+static const
+struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX + 1] = {
 	[NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
@@ -5217,7 +5221,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 };

 static const struct nla_policy
-	nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
+	nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX + 1] = {
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC] = { .type = NLA_U8 },
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
 	[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
@@ -5363,7 +5367,7 @@ do {									    \
 }

 static int nl80211_parse_mesh_setup(struct genl_info *info,
-				     struct mesh_setup *setup)
+				    struct mesh_setup *setup)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct nlattr *tb[NL80211_MESH_SETUP_ATTR_MAX + 1];
@@ -5672,7 +5676,7 @@ static const struct nla_policy reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] =
 };

 static int parse_reg_rule(struct nlattr *tb[],
-	struct ieee80211_reg_rule *reg_rule)
+			  struct ieee80211_reg_rule *reg_rule)
 {
 	struct ieee80211_freq_range *freq_range = &reg_rule->freq_range;
 	struct ieee80211_power_rule *power_rule = &reg_rule->power_rule;
@@ -6686,7 +6690,7 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
 	/* csa_attrs is defined static to avoid waste of stack size - this
 	 * function is called under RTNL lock, so this should not be a problem.
 	 */
-	static struct nlattr *csa_attrs[NL80211_ATTR_MAX+1];
+	static struct nlattr *csa_attrs[NL80211_ATTR_MAX + 1];
 	int err;
 	bool need_new_beacon = false;
 	int len, i;
@@ -6982,8 +6986,8 @@ static int nl80211_dump_scan(struct sk_buff *skb, struct netlink_callback *cb)
 		if (++idx <= start)
 			continue;
 		if (nl80211_send_bss(skb, cb,
-				cb->nlh->nlmsg_seq, NLM_F_MULTI,
-				rdev, wdev, scan) < 0) {
+				     cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				     rdev, wdev, scan) < 0) {
 			idx--;
 			break;
 		}
@@ -7035,7 +7039,7 @@ static int nl80211_send_survey(struct sk_buff *msg, u32 portid, u32 seq,
 		goto nla_put_failure;
 	if ((survey->filled & SURVEY_INFO_TIME) &&
 	    nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME,
-			survey->time, NL80211_SURVEY_INFO_PAD))
+			      survey->time, NL80211_SURVEY_INFO_PAD))
 		goto nla_put_failure;
 	if ((survey->filled & SURVEY_INFO_TIME_BUSY) &&
 	    nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_BUSY,
@@ -7109,9 +7113,9 @@ static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
 		}

 		if (nl80211_send_survey(skb,
-				NETLINK_CB(cb->skb).portid,
-				cb->nlh->nlmsg_seq, NLM_F_MULTI,
-				wdev->netdev, radio_stats, &survey) < 0)
+					NETLINK_CB(cb->skb).portid,
+					cb->nlh->nlmsg_seq, NLM_F_MULTI,
+					wdev->netdev, radio_stats, &survey) < 0)
 			goto out;
 		survey_idx++;
 	}
@@ -7674,8 +7678,8 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
 		bool no_ht = false;

 		connkeys = nl80211_parse_connkeys(rdev,
-					  info->attrs[NL80211_ATTR_KEYS],
-					  &no_ht);
+						  info->attrs[NL80211_ATTR_KEYS],
+						  &no_ht);
 		if (IS_ERR(connkeys))
 			return PTR_ERR(connkeys);

@@ -8022,7 +8026,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)

 	connect.bg_scan_period = -1;
 	if (info->attrs[NL80211_ATTR_BG_SCAN_PERIOD] &&
-		(wiphy->flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)) {
+	    (wiphy->flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)) {
 		connect.bg_scan_period =
 			nla_get_u16(info->attrs[NL80211_ATTR_BG_SCAN_PERIOD]);
 	}
@@ -8067,7 +8071,8 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)

 	if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) {
 		connkeys = nl80211_parse_connkeys(rdev,
-					  info->attrs[NL80211_ATTR_KEYS], NULL);
+						  info->attrs[NL80211_ATTR_KEYS],
+						  NULL);
 		if (IS_ERR(connkeys))
 			return PTR_ERR(connkeys);
 	}
@@ -9046,7 +9051,7 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MCAST_RATE] &&
 	    !nl80211_parse_mcast_rate(rdev, setup.mcast_rate,
 			    nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
-			return -EINVAL;
+		return -EINVAL;

 	if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
 		setup.beacon_interval =
@@ -12234,7 +12239,7 @@ void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *addr,
 	    nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
 	    nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) ||
 	    (ie_len && ie &&
-	     nla_put(msg, NL80211_ATTR_IE, ie_len , ie)))
+	     nla_put(msg, NL80211_ATTR_IE, ie_len, ie)))
 		goto nla_put_failure;

 	genlmsg_end(msg, hdr);
@@ -12958,7 +12963,7 @@ static void nl80211_ch_switch_notify(struct cfg80211_registered_device *rdev,

 	if ((notif == NL80211_CMD_CH_SWITCH_STARTED_NOTIFY) &&
 	    (nla_put_u32(msg, NL80211_ATTR_CH_SWITCH_COUNT, count)))
-			goto nla_put_failure;
+		goto nla_put_failure;

 	genlmsg_end(msg, hdr);

@@ -13297,7 +13302,7 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,

 		if (wakeup->net_detect &&
 		    cfg80211_net_detect_results(msg, wakeup))
-				goto free_msg;
+			goto free_msg;

 		nla_nest_end(msg, reasons);
 	}
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 06/10] nl80211: Various checkpatch.pl spacing fixes

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:53 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the following spacing issues reported
> by checkpatch.pl -
> - space preferred around that <operator>
> - no space needed after cast.
> - Alignment should match open parenthesis
> - suspect code indent for conditional statements
> - Statements should start on a tabstop
>
> This patch also contains two hunks to fix 'line over 80 characters',
> that are spacing related.
> All other instances of that warning have been ignored.
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me except for one minor point:

> ---
>  net/wireless/nl80211.c | 103 ++++++++++++++++++++++++++-----------------------
>  1 file changed, 54 insertions(+), 49 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 11cbf0b..ad7cdce 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -1735,8 +1735,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
>                                rdev->wiphy.max_num_csa_counters))
>                         goto nla_put_failure;
>
> -               if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
> -                   nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
> +               if ((rdev->wiphy.regulatory_flags &
> +                    REGULATORY_WIPHY_SELF_MANAGED) &&
> +                    nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))

Adding the brackets around the & expression doesn't look spacing
related to me. What's the exact warning this is fixing?

>                         goto nla_put_failure;
>
>                 if (nla_put(msg, NL80211_ATTR_EXT_FEATURES,

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH v2 06/10] nl80211: Various checkpatch.pl spacing fixes

[Kirtika Ruchandani]

> Adding the brackets around the & expression doesn't look spacing
> related to me. What's the exact warning this is fixing?

>From the commit message - "This patch also contains two hunks to fix
'line over 80 characters',
that are spacing related". This is the second hunk, the first being
the comments in the nl80211_fam
definition. Should I resend with these two hunks omitted, or fix my wording?

Re: [PATCH v2 06/10] nl80211: Various checkpatch.pl spacing fixes

[Julian Calaby]

Hi Kirtika,

On Mon, May 30, 2016 at 4:04 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
>> Adding the brackets around the & expression doesn't look spacing
>> related to me. What's the exact warning this is fixing?
>
> From the commit message - "This patch also contains two hunks to fix
> 'line over 80 characters',
> that are spacing related". This is the second hunk, the first being
> the comments in the nl80211_fam
> definition. Should I resend with these two hunks omitted, or fix my wording?

That explains it, I missed that bit.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

Re: [PATCH v2 06/10] nl80211: Various checkpatch.pl spacing fixes

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:53 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the following spacing issues reported
> by checkpatch.pl -
> - space preferred around that <operator>
> - no space needed after cast.
> - Alignment should match open parenthesis
> - suspect code indent for conditional statements
> - Statements should start on a tabstop
>
> This patch also contains two hunks to fix 'line over 80 characters',
> that are spacing related.
> All other instances of that warning have been ignored.
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

With Kirtika's explanation, this is:

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 103 ++++++++++++++++++++++++++-----------------------
>  1 file changed, 54 insertions(+), 49 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 11cbf0b..ad7cdce 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -39,10 +39,10 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
>
>  /* the netlink family */
>  static struct genl_family nl80211_fam = {
> -       .id = GENL_ID_GENERATE,         /* don't bother with a hardcoded ID */
> -       .name = NL80211_GENL_NAME,      /* have users key off the name instead */
> -       .hdrsize = 0,                   /* no private header */
> -       .version = 1,                   /* no particular meaning now */
> +       .id = GENL_ID_GENERATE,     /* don't bother with a hardcoded ID */
> +       .name = NL80211_GENL_NAME,  /* have users key off the name instead */
> +       .hdrsize = 0,               /* no private header */
> +       .version = 1,               /* no particular meaning now */
>         .maxattr = NL80211_ATTR_MAX,
>         .netnsok = true,
>         .pre_doit = nl80211_pre_doit,
> @@ -213,7 +213,7 @@ cfg80211_get_dev_from_info(struct net *netns, struct genl_info *info)
>  static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
>         [NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
>         [NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
> -                                     .len = 20-1 },
> +                                     .len = 20 - 1 },
>         [NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
>
>         [NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
> @@ -231,7 +231,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
>
>         [NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
>         [NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
> -       [NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
> +       [NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ - 1 },
>
>         [NL80211_ATTR_MAC] = { .len = ETH_ALEN },
>         [NL80211_ATTR_PREV_BSSID] = { .len = ETH_ALEN },
> @@ -967,7 +967,7 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
>         int i, j;
>
>         nl_combis = nla_nest_start(msg,
> -                               NL80211_ATTR_INTERFACE_COMBINATIONS);
> +                                  NL80211_ATTR_INTERFACE_COMBINATIONS);
>         if (!nl_combis)
>                 goto nla_put_failure;
>
> @@ -1012,9 +1012,9 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy,
>                         goto nla_put_failure;
>                 if (large &&
>                     (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
> -                               c->radar_detect_widths) ||
> +                                c->radar_detect_widths) ||
>                      nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
> -                               c->radar_detect_regions)))
> +                                c->radar_detect_regions)))
>                         goto nla_put_failure;
>
>                 nla_nest_end(msg, nl_combi);
> @@ -1493,7 +1493,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
>
>                 i = 0;
>  #define CMD(op, n)                                                     \
> -                do {                                                   \
> +               do {                                                    \
>                         if (rdev->ops->op) {                            \
>                                 i++;                                    \
>                                 if (nla_put_u32(msg, i, NL80211_CMD_ ## n)) \
> @@ -1735,8 +1735,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
>                                rdev->wiphy.max_num_csa_counters))
>                         goto nla_put_failure;
>
> -               if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED &&
> -                   nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
> +               if ((rdev->wiphy.regulatory_flags &
> +                    REGULATORY_WIPHY_SELF_MANAGED) &&
> +                    nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
>                         goto nla_put_failure;
>
>                 if (nla_put(msg, NL80211_ATTR_EXT_FEATURES,
> @@ -2299,7 +2300,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
>                 if (frag_threshold < 256)
>                         return -EINVAL;
>
> -               if (frag_threshold != (u32) -1) {
> +               if (frag_threshold != (u32)-1) {
>                         /* Fragments (apart from the last one) are required to
>                          * have even length. Make the fragmentation code
>                          * simpler by stripping LSB should someone try to use
> @@ -2406,7 +2407,8 @@ static int nl80211_send_chandef(struct sk_buff *msg,
>         return 0;
>  }
>
> -static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flags,
> +static int nl80211_send_iface(struct sk_buff *msg,
> +                             u32 portid, u32 seq, int flags,
>                               struct cfg80211_registered_device *rdev,
>                               struct wireless_dev *wdev, bool removal)
>  {
> @@ -2470,7 +2472,8 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flag
>         return -EMSGSIZE;
>  }
>
> -static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
> +static int nl80211_dump_interface(struct sk_buff *skb,
> +                                 struct netlink_callback *cb)
>  {
>         int wp_idx = 0;
>         int if_idx = 0;
> @@ -2557,7 +2560,7 @@ static int parse_monitor_flags(struct nlattr *nla, u32 *mntrflags)
>
>         for (flag = 1; flag <= NL80211_MNTR_FLAG_MAX; flag++)
>                 if (flags[flag])
> -                       *mntrflags |= (1<<flag);
> +                       *mntrflags |= (1 << flag);
>
>         return 0;
>  }
> @@ -2722,9 +2725,9 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
>                 return -ENOMEM;
>
>         wdev = rdev_add_virtual_intf(rdev,
> -                               nla_data(info->attrs[NL80211_ATTR_IFNAME]),
> -                               NET_NAME_USER, type, err ? NULL : &flags,
> -                               &params);
> +                                    nla_data(info->attrs[NL80211_ATTR_IFNAME]),
> +                                    NET_NAME_USER, type, err ? NULL : &flags,
> +                                    &params);
>         if (WARN_ON(!wdev)) {
>                 nlmsg_free(msg);
>                 return -EPROTO;
> @@ -3000,7 +3003,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
>                         goto out;
>
>                 err = rdev_set_default_key(rdev, dev, key.idx,
> -                                                key.def_uni, key.def_multi);
> +                                          key.def_uni, key.def_multi);
>
>                 if (err)
>                         goto out;
> @@ -3621,7 +3624,7 @@ static int parse_station_flags(struct genl_info *info,
>
>         for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++) {
>                 if (flags[flag]) {
> -                       params->sta_flags_set |= (1<<flag);
> +                       params->sta_flags_set |= (1 << flag);
>
>                         /* no longer support new API additions in old API */
>                         if (flag > NL80211_STA_FLAG_MAX_OLD_API)
> @@ -3949,10 +3952,10 @@ static int nl80211_dump_station(struct sk_buff *skb,
>                         goto out_err;
>
>                 if (nl80211_send_station(skb, NL80211_CMD_NEW_STATION,
> -                               NETLINK_CB(cb->skb).portid,
> -                               cb->nlh->nlmsg_seq, NLM_F_MULTI,
> -                               rdev, wdev->netdev, mac_addr,
> -                               &sinfo) < 0)
> +                                        NETLINK_CB(cb->skb).portid,
> +                                        cb->nlh->nlmsg_seq, NLM_F_MULTI,
> +                                        rdev, wdev->netdev, mac_addr,
> +                                        &sinfo) < 0)
>                         goto out;
>
>                 sta_idx++;
> @@ -4224,7 +4227,7 @@ static int nl80211_parse_sta_wme(struct genl_info *info,
>  }
>
>  static int nl80211_parse_sta_channel_info(struct genl_info *info,
> -                                     struct station_parameters *params)
> +                                         struct station_parameters *params)
>  {
>         if (info->attrs[NL80211_ATTR_STA_SUPPORTED_CHANNELS]) {
>                 params->supported_channels =
> @@ -4655,9 +4658,9 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
>  }
>
>  static int nl80211_send_mpath(struct sk_buff *msg, u32 portid, u32 seq,
> -                               int flags, struct net_device *dev,
> -                               u8 *dst, u8 *next_hop,
> -                               struct mpath_info *pinfo)
> +                             int flags, struct net_device *dev,
> +                             u8 *dst, u8 *next_hop,
> +                             struct mpath_info *pinfo)
>  {
>         void *hdr;
>         struct nlattr *pinfoattr;
> @@ -4790,7 +4793,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
>                 return -ENOMEM;
>
>         if (nl80211_send_mpath(msg, info->snd_portid, info->snd_seq, 0,
> -                                dev, dst, next_hop, &pinfo) < 0) {
> +                              dev, dst, next_hop, &pinfo) < 0) {
>                 nlmsg_free(msg);
>                 return -ENOBUFS;
>         }
> @@ -5185,7 +5188,8 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
>         return -ENOBUFS;
>  }
>
> -static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] = {
> +static const
> +struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX + 1] = {
>         [NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
>         [NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
>         [NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
> @@ -5217,7 +5221,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
>  };
>
>  static const struct nla_policy
> -       nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
> +       nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX + 1] = {
>         [NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC] = { .type = NLA_U8 },
>         [NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
>         [NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
> @@ -5363,7 +5367,7 @@ do {                                                                          \
>  }
>
>  static int nl80211_parse_mesh_setup(struct genl_info *info,
> -                                    struct mesh_setup *setup)
> +                                   struct mesh_setup *setup)
>  {
>         struct cfg80211_registered_device *rdev = info->user_ptr[0];
>         struct nlattr *tb[NL80211_MESH_SETUP_ATTR_MAX + 1];
> @@ -5672,7 +5676,7 @@ static const struct nla_policy reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] =
>  };
>
>  static int parse_reg_rule(struct nlattr *tb[],
> -       struct ieee80211_reg_rule *reg_rule)
> +                         struct ieee80211_reg_rule *reg_rule)
>  {
>         struct ieee80211_freq_range *freq_range = &reg_rule->freq_range;
>         struct ieee80211_power_rule *power_rule = &reg_rule->power_rule;
> @@ -6686,7 +6690,7 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
>         /* csa_attrs is defined static to avoid waste of stack size - this
>          * function is called under RTNL lock, so this should not be a problem.
>          */
> -       static struct nlattr *csa_attrs[NL80211_ATTR_MAX+1];
> +       static struct nlattr *csa_attrs[NL80211_ATTR_MAX + 1];
>         int err;
>         bool need_new_beacon = false;
>         int len, i;
> @@ -6982,8 +6986,8 @@ static int nl80211_dump_scan(struct sk_buff *skb, struct netlink_callback *cb)
>                 if (++idx <= start)
>                         continue;
>                 if (nl80211_send_bss(skb, cb,
> -                               cb->nlh->nlmsg_seq, NLM_F_MULTI,
> -                               rdev, wdev, scan) < 0) {
> +                                    cb->nlh->nlmsg_seq, NLM_F_MULTI,
> +                                    rdev, wdev, scan) < 0) {
>                         idx--;
>                         break;
>                 }
> @@ -7035,7 +7039,7 @@ static int nl80211_send_survey(struct sk_buff *msg, u32 portid, u32 seq,
>                 goto nla_put_failure;
>         if ((survey->filled & SURVEY_INFO_TIME) &&
>             nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME,
> -                       survey->time, NL80211_SURVEY_INFO_PAD))
> +                             survey->time, NL80211_SURVEY_INFO_PAD))
>                 goto nla_put_failure;
>         if ((survey->filled & SURVEY_INFO_TIME_BUSY) &&
>             nla_put_u64_64bit(msg, NL80211_SURVEY_INFO_TIME_BUSY,
> @@ -7109,9 +7113,9 @@ static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
>                 }
>
>                 if (nl80211_send_survey(skb,
> -                               NETLINK_CB(cb->skb).portid,
> -                               cb->nlh->nlmsg_seq, NLM_F_MULTI,
> -                               wdev->netdev, radio_stats, &survey) < 0)
> +                                       NETLINK_CB(cb->skb).portid,
> +                                       cb->nlh->nlmsg_seq, NLM_F_MULTI,
> +                                       wdev->netdev, radio_stats, &survey) < 0)
>                         goto out;
>                 survey_idx++;
>         }
> @@ -7674,8 +7678,8 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
>                 bool no_ht = false;
>
>                 connkeys = nl80211_parse_connkeys(rdev,
> -                                         info->attrs[NL80211_ATTR_KEYS],
> -                                         &no_ht);
> +                                                 info->attrs[NL80211_ATTR_KEYS],
> +                                                 &no_ht);
>                 if (IS_ERR(connkeys))
>                         return PTR_ERR(connkeys);
>
> @@ -8022,7 +8026,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
>
>         connect.bg_scan_period = -1;
>         if (info->attrs[NL80211_ATTR_BG_SCAN_PERIOD] &&
> -               (wiphy->flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)) {
> +           (wiphy->flags & WIPHY_FLAG_SUPPORTS_FW_ROAM)) {
>                 connect.bg_scan_period =
>                         nla_get_u16(info->attrs[NL80211_ATTR_BG_SCAN_PERIOD]);
>         }
> @@ -8067,7 +8071,8 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
>
>         if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) {
>                 connkeys = nl80211_parse_connkeys(rdev,
> -                                         info->attrs[NL80211_ATTR_KEYS], NULL);
> +                                                 info->attrs[NL80211_ATTR_KEYS],
> +                                                 NULL);
>                 if (IS_ERR(connkeys))
>                         return PTR_ERR(connkeys);
>         }
> @@ -9046,7 +9051,7 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
>         if (info->attrs[NL80211_ATTR_MCAST_RATE] &&
>             !nl80211_parse_mcast_rate(rdev, setup.mcast_rate,
>                             nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
> -                       return -EINVAL;
> +               return -EINVAL;
>
>         if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
>                 setup.beacon_interval =
> @@ -12234,7 +12239,7 @@ void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *addr,
>             nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
>             nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) ||
>             (ie_len && ie &&
> -            nla_put(msg, NL80211_ATTR_IE, ie_len , ie)))
> +            nla_put(msg, NL80211_ATTR_IE, ie_len, ie)))
>                 goto nla_put_failure;
>
>         genlmsg_end(msg, hdr);
> @@ -12958,7 +12963,7 @@ static void nl80211_ch_switch_notify(struct cfg80211_registered_device *rdev,
>
>         if ((notif == NL80211_CMD_CH_SWITCH_STARTED_NOTIFY) &&
>             (nla_put_u32(msg, NL80211_ATTR_CH_SWITCH_COUNT, count)))
> -                       goto nla_put_failure;
> +               goto nla_put_failure;
>
>         genlmsg_end(msg, hdr);
>
> @@ -13297,7 +13302,7 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev,
>
>                 if (wakeup->net_detect &&
>                     cfg80211_net_detect_results(msg, wakeup))
> -                               goto free_msg;
> +                       goto free_msg;
>
>                 nla_nest_end(msg, reasons);
>         }
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 07/10] nl80211: Avoid multiple assignments on same line

[Kirtika Ruchandani]

This patch fixes the checkpatch.pl warning "multiple assignments
should be avoided."

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ad7cdce..6f8e2a7 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2603,7 +2603,8 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)

 	memset(&params, 0, sizeof(params));

-	otype = ntype = dev->ieee80211_ptr->iftype;
+	otype = dev->ieee80211_ptr->iftype;
+	ntype = dev->ieee80211_ptr->iftype;

 	if (info->attrs[NL80211_ATTR_IFTYPE]) {
 		ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 07/10] nl80211: Avoid multiple assignments on same line

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:53 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the checkpatch.pl warning "multiple assignments
> should be avoided."
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

I'm not sure I agree with checkpatch here, but this looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index ad7cdce..6f8e2a7 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -2603,7 +2603,8 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
>
>         memset(&params, 0, sizeof(params));
>
> -       otype = ntype = dev->ieee80211_ptr->iftype;
> +       otype = dev->ieee80211_ptr->iftype;
> +       ntype = dev->ieee80211_ptr->iftype;
>
>         if (info->attrs[NL80211_ATTR_IFTYPE]) {
>                 ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 08/10] nl80211: Fix spelling

[Kirtika Ruchandani]

Fix 'implementation' spelling, reported by checkpatch.pl

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 6f8e2a7..c6d870e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -6492,7 +6492,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
 				       nla_data(ssid), nla_len(ssid));
 				request->match_sets[i].ssid.ssid_len =
 					nla_len(ssid);
-				/* special attribute - old implemenation w/a */
+				/* special attribute - old implementation w/a */
 				request->match_sets[i].rssi_thold =
 					default_match_rssi;
 				rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 08/10] nl80211: Fix spelling

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:54 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> Fix 'implementation' spelling, reported by checkpatch.pl
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 6f8e2a7..c6d870e 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -6492,7 +6492,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
>                                        nla_data(ssid), nla_len(ssid));
>                                 request->match_sets[i].ssid.ssid_len =
>                                         nla_len(ssid);
> -                               /* special attribute - old implemenation w/a */
> +                               /* special attribute - old implementation w/a */
>                                 request->match_sets[i].rssi_thold =
>                                         default_match_rssi;
>                                 rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 09/10] nl80211: Fix checkpatch.pl warning

[Kirtika Ruchandani]

This patch fixes the checkpatch.pl warning "foo * bar should be
foo *bar"

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c6d870e..46757af 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12214,7 +12214,7 @@ void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
 }

 void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *addr,
-					const u8* ie, u8 ie_len, gfp_t gfp)
+					const u8 *ie, u8 ie_len, gfp_t gfp)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
@@ -13362,7 +13362,7 @@ void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer,
 }
 EXPORT_SYMBOL(cfg80211_tdls_oper_request);

-static int nl80211_netlink_notify(struct notifier_block * nb,
+static int nl80211_netlink_notify(struct notifier_block *nb,
 				  unsigned long state,
 				  void *_notify)
 {
--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 09/10] nl80211: Fix checkpatch.pl warning

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:54 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the checkpatch.pl warning "foo * bar should be
> foo *bar"
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index c6d870e..46757af 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -12214,7 +12214,7 @@ void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
>  }
>
>  void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *addr,
> -                                       const u8* ie, u8 ie_len, gfp_t gfp)
> +                                       const u8 *ie, u8 ie_len, gfp_t gfp)
>  {
>         struct wireless_dev *wdev = dev->ieee80211_ptr;
>         struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
> @@ -13362,7 +13362,7 @@ void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer,
>  }
>  EXPORT_SYMBOL(cfg80211_tdls_oper_request);
>
> -static int nl80211_netlink_notify(struct notifier_block * nb,
> +static int nl80211_netlink_notify(struct notifier_block *nb,
>                                   unsigned long state,
>                                   void *_notify)
>  {
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[PATCH v2 10/10] nl80211: Prefer kcalloc over kzalloc

[Kirtika Ruchandani]

This patch fixes the checkpatch.pl warning -
"prefer kcalloc over kzalloc with multiply"

Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>
---
 net/wireless/nl80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 46757af..2964406 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -9482,7 +9482,7 @@ static int nl80211_parse_wowlan_nd(struct cfg80211_registered_device *rdev,
 	struct nlattr **tb;
 	int err;

-	tb = kzalloc(NUM_NL80211_ATTR * sizeof(*tb), GFP_KERNEL);
+	tb = kcalloc(NUM_NL80211_ATTR, sizeof(*tb), GFP_KERNEL);
 	if (!tb)
 		return -ENOMEM;

--
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 10/10] nl80211: Prefer kcalloc over kzalloc

[Julian Calaby]

Hi All,

On Mon, May 30, 2016 at 12:54 PM, Kirtika Ruchandani
<kirtika.ruchandani@gmail.com> wrote:
> This patch fixes the checkpatch.pl warning -
> "prefer kcalloc over kzalloc with multiply"
>
> Signed-off-by: Kirtika Ruchandani <kirtika.ruchandani@gmail.com>

Looks right to me.

Reviewed-by: Julian Calaby <julian.calaby@gmail.com>

Thanks,

Julian Calaby


> ---
>  net/wireless/nl80211.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> index 46757af..2964406 100644
> --- a/net/wireless/nl80211.c
> +++ b/net/wireless/nl80211.c
> @@ -9482,7 +9482,7 @@ static int nl80211_parse_wowlan_nd(struct cfg80211_registered_device *rdev,
>         struct nlattr **tb;
>         int err;
>
> -       tb = kzalloc(NUM_NL80211_ATTR * sizeof(*tb), GFP_KERNEL);
> +       tb = kcalloc(NUM_NL80211_ATTR, sizeof(*tb), GFP_KERNEL);
>         if (!tb)
>                 return -ENOMEM;
>
> --
> 2.8.0.rc3.226.g39d4020
>



-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/