From: "Nicolas Escande" <nico.escande@gmail.com>
To: "Karthikeyan Periyasamy" <quic_periyasa@quicinc.com>,
<ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH v2 0/7] wifi: ath12k: Add monitor interface support on QCN9274
Date: Tue, 21 Jan 2025 10:48:49 +0100 [thread overview]
Message-ID: <D77NNT0XWFMM.3F8D0CVJ8C7SI@gmail.com> (raw)
In-Reply-To: <20250119152917.2316514-1-quic_periyasa@quicinc.com>
On Sun Jan 19, 2025 at 4:29 PM CET, Karthikeyan Periyasamy wrote:
> Currently, monitor interface not supported. Therefore, add the missed TLV
> tags parsing in the monitor parser, configure the monitor vdev state
> identifier with HTT filter setup.
>
> Depends-On:
> [PATCH v2 00/14] wifi: ath12k: Enable monitor ring for updating station dump in QCN9274
> https://lore.kernel.org/all/20241223060132.3506372-1-quic_ppranees@quicinc.com/
>
> [PATCH v3 00/10] wifi: ath12k: Add peer extended Rx statistics debugfs support
> https://lore.kernel.org/all/20250119135751.2221902-1-quic_periyasa@quicinc.com/
>
> v2:
> wifi: ath12k: add monitor interface support on QCN9274
> - remove redundant filter setting in ath12k_mac_monitor_start()
> - set the default filter when the htt monitor configuration get disable
>
> Hari Chandrakanthan (1):
> wifi: ath12k: fix link valid field initialization in the monitor Rx
>
> Karthikeyan Periyasamy (1):
> wifi: ath12k: Replace band define G with GHZ where appropriate
>
> P Praneesh (5):
> wifi: ath12k: Add extra TLV tag parsing support in monitor Rx path
> wifi: ath12k: Avoid fetch Error bitmap and decap format from Rx TLV
> wifi: ath12k: change the status update in the monitor Rx
> wifi: ath12k: Avoid packet offset and FCS length from Rx TLV
> wifi: ath12k: add monitor interface support on QCN9274
>
> drivers/net/wireless/ath/ath12k/core.c | 5 +
> drivers/net/wireless/ath/ath12k/core.h | 18 +-
> drivers/net/wireless/ath/ath12k/dp.h | 4 +-
> drivers/net/wireless/ath/ath12k/dp_mon.c | 362 +++++++++++++++++++----
> drivers/net/wireless/ath/ath12k/dp_mon.h | 5 +-
> drivers/net/wireless/ath/ath12k/dp_rx.c | 7 +-
> drivers/net/wireless/ath/ath12k/dp_tx.c | 8 +-
> drivers/net/wireless/ath/ath12k/hal_rx.h | 17 +-
> drivers/net/wireless/ath/ath12k/hw.c | 4 +-
> drivers/net/wireless/ath/ath12k/mac.c | 74 +++--
> drivers/net/wireless/ath/ath12k/wmi.c | 38 +--
> drivers/net/wireless/ath/ath12k/wmi.h | 20 +-
> 12 files changed, 438 insertions(+), 124 deletions(-)
>
>
> base-commit: e7ef944b3e2c31b608800925e784f67596375770
> prerequisite-patch-id: afb04ab90da26435239077de723d1276946a194a
> prerequisite-patch-id: 1b12bea72973c14f461b8202eed9432f27932876
> prerequisite-patch-id: a6719494f46b8568504be8c64255676e67b4deda
> prerequisite-patch-id: 054756eb1705babff324a743e62685bb78035198
> prerequisite-patch-id: 889c4a0174fac23261705a42b46e923d7e7a0a18
> prerequisite-patch-id: ea0321fbd8a59c09191873f59b6aea8225f4b8e5
> prerequisite-patch-id: 3c8ccb635d319f8755649e445b68feb615fd82c4
> prerequisite-patch-id: d516b2a3196218f42fdf4567516a1fd2c8b4c40f
> prerequisite-patch-id: a2c59b4e468384e27d934a986e5fe9a951685fd9
> prerequisite-patch-id: 359fecf93ef53f39243cc1b3466ab06fbd33cc71
> prerequisite-patch-id: bf0b6542c65299c0bfa7fef2da6f09dd8453c39f
> prerequisite-patch-id: 1dc79cafb399be590d1e418afcc5a719ae35834f
> prerequisite-patch-id: fb1e39f2dce024ff692b0e6b112dc90c6a43ad00
> prerequisite-patch-id: 9ea3943ae0b6e6a5a09cb648eaa35f8087967ac3
> prerequisite-patch-id: 35da9ccb2466675b50e819029c13cbda70702fc2
> prerequisite-patch-id: 282cdacca7b9bbef5a94b1a78457304d38362af2
> prerequisite-patch-id: 5bdb2bd29cd4c92d23708432f451e92951c23f0e
> prerequisite-patch-id: 4b6f75cfa4d25f974f8fa61adbc85fff35a187fa
> prerequisite-patch-id: 6a015b7d89f3d61adb5d60eff2d63fea10d9c3b0
> prerequisite-patch-id: afba80a88de0869ade8954c32ebbec407608a1c0
> prerequisite-patch-id: 12367e8ecdccf254c41bd0518cea6877e4673bb3
> prerequisite-patch-id: d94f4a9c9b0b3bdc9e709efcae0cba4983bf440f
> prerequisite-patch-id: 8c9df1e16a25c3b9a3fb709ba9bc8d37e6f14a5e
> prerequisite-patch-id: 8db0be3595dc82725d9a195f3239402b9062d9f3
I've been running this updated series since yesterday and no problem so far
when running concurrent monitor & ap
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
prev parent reply other threads:[~2025-01-21 9:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-19 15:29 [PATCH v2 0/7] wifi: ath12k: Add monitor interface support on QCN9274 Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 1/7] wifi: ath12k: fix link valid field initialization in the monitor Rx Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 2/7] wifi: ath12k: Add extra TLV tag parsing support in monitor Rx path Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 3/7] wifi: ath12k: Avoid fetch Error bitmap and decap format from Rx TLV Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 4/7] wifi: ath12k: Replace band define G with GHZ where appropriate Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 5/7] wifi: ath12k: change the status update in the monitor Rx Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 6/7] wifi: ath12k: Avoid packet offset and FCS length from Rx TLV Karthikeyan Periyasamy
2025-01-19 15:29 ` [PATCH v2 7/7] wifi: ath12k: add monitor interface support on QCN9274 Karthikeyan Periyasamy
2025-01-21 9:48 ` Nicolas Escande [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D77NNT0XWFMM.3F8D0CVJ8C7SI@gmail.com \
--to=nico.escande@gmail.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_periyasa@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).