From: "Luka Gejak" <luka.gejak@linux.dev>
To: "YuanZhe Liu" <25031212351@stu.xidian.edu.cn>,
"Ping-Ke Shih" <pkshih@realtek.com>
Cc: <linux-wireless@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<stable@vger.kernel.org>, "Sascha Hauer" <s.hauer@pengutronix.de>,
"Bin Yu" <byu@xidian.edu.cn>,
"Cheng Wen" <wencheng@xidian.edu.cn>
Subject: Re: [PATCH] wifi: rtw88: usb: drop RX frames received before the device is started
Date: Sat, 17 Oct 2026 11:47:24 +0200 [thread overview]
Message-ID: <DM70O3RX648Y.JHOHHH89JM3F@linux.dev> (raw)
In-Reply-To: <20261016161931.18495-1-25031212351@stu.xidian.edu.cn>
On Fri Oct 16, 2026 at 6:19 PM CEST, YuanZhe Liu wrote:
> rtw_usb_probe() submits the bulk-in RX URBs at the end of probe, right
> after rtw_register_hw(). A device can already have data queued on that
> endpoint, so rtw_usb_read_port_complete() runs and queues the frame on
> rtwusb->rx_queue before any interface has been brought up. Submitting
> the URBs late does not close that window: the frame can arrive as soon
> as they are submitted, which is still before the device is started.
>
> rtw_usb_rx_handler() hands every non-C2H frame to mac80211 without
> checking whether the device is running, so ieee80211_rx_irqsafe() runs
> while local->started is still false. mac80211 treats that as a driver
> bug and warns in ieee80211_rx_list():
>
> WARNING: net/mac80211/rx.c:5601 at ieee80211_rx_list
> Call Trace:
> <IRQ>
> ieee80211_rx_napi
> ieee80211_rx
> ieee80211_handle_queued_frames
> <TASK>
> rtw_usb_rx_resubmit
> rtw_usb_setup_rx
> rtw_usb_probe
>
> The frame is dropped by mac80211 anyway, and because the URB is
> resubmitted from its completion handler, every further frame repeats the
> warning, which floods the log until an interface is actually started.
>
> rtw_ops_tx() already drops frames outside of start/stop by checking
> RTW_FLAG_RUNNING, which mirrors local->started: it is set at the end of
> rtw_core_start() and cleared at the beginning of rtw_core_stop(). Use
> the same check in the RX path and free the frame while the device is not
> running. This also covers the opposite ordering, where a frame that is
> still queued in rtwusb->rx_queue is handed over after the device has
> been stopped again.
>
> C2H packets are left untouched: they go to the firmware event queue
> handled by rtw_fw_c2h_cmd_rx_irqsafe() and are never passed to mac80211.
>
> Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support")
> Cc: stable@vger.kernel.org
> Co-developed-by: Bin Yu <byu@xidian.edu.cn>
> Signed-off-by: Bin Yu <byu@xidian.edu.cn>
> Co-developed-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: Cheng Wen <wencheng@xidian.edu.cn>
> Signed-off-by: YuanZhe Liu <25031212351@stu.xidian.edu.cn>
> ---
Looks good to me.
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Best regards,
Luka Gejak
prev parent reply other threads:[~2026-10-17 9:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 16:19 [PATCH] wifi: rtw88: usb: drop RX frames received before the device is started YuanZhe Liu
2026-10-17 9:47 ` Luka Gejak [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM70O3RX648Y.JHOHHH89JM3F@linux.dev \
--to=luka.gejak@linux.dev \
--cc=25031212351@stu.xidian.edu.cn \
--cc=byu@xidian.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=s.hauer@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=wencheng@xidian.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox