From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Peter Chiu <chui-hao.chiu@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>,
Lorenzo Bianconi <lorenzo.bianconi@redhat.com>,
Ryder Lee <ryder.Lee@mediatek.com>,
Evelyn Tsai <evelyn.tsai@mediatek.com>,
Shayne Chen <shayne.chen@mediatek.com>,
linux-wireless@vger.kernel.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 2/2] wifi: mt76: mt7915: wed: enable red per-band token drop
Date: Thu, 5 Jan 2023 13:20:53 +0100 [thread overview]
Message-ID: <Y7bApSqBT2LXdBhu@lore-desk> (raw)
In-Reply-To: <20230105114711.31430-2-chui-hao.chiu@mediatek.com>
[-- Attachment #1: Type: text/plain, Size: 4007 bytes --]
> Enable RED to limit the number of token used by each band. If single band
> uses too many tokens, it would hurt the throughput of the other bands.The
> software path can solve this problem by AQL so enable RED for HW path only.
>
> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
> ---
> .../wireless/mediatek/mt76/mt76_connac_mcu.h | 1 +
> .../net/wireless/mediatek/mt76/mt7915/mcu.c | 54 ++++++++++++++++++-
> .../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
> 3 files changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> index f1e942b9a887..855a434ecf54 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> @@ -1171,6 +1171,7 @@ enum {
> MCU_EXT_CMD_GET_MIB_INFO = 0x5a,
> MCU_EXT_CMD_TXDPD_CAL = 0x60,
> MCU_EXT_CMD_CAL_CACHE = 0x67,
> + MCU_EXT_CMD_RED_ENABLE = 0x68,
> MCU_EXT_CMD_SET_RADAR_TH = 0x7c,
> MCU_EXT_CMD_SET_RDD_PATTERN = 0x7d,
> MCU_EXT_CMD_MWDS_SUPPORT = 0x80,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> index 37a3c1f082d9..a7bc2043a0db 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> @@ -2291,6 +2291,57 @@ mt7915_mcu_init_rx_airtime(struct mt7915_dev *dev)
> sizeof(req), true);
> }
>
> +static int mt7915_red_set_watermark(struct mt7915_dev *dev)
> +{
> +#define RED_GLOBAL_TOKEN_WATERMARK 2
> + u16 nbuf = dev->mt76.mmio.wed.wlan.nbuf;
I do not think this patch compile if CONFIG_NET_MEDIATEK_SOC_WED is not enabled
> + struct {
> + __le32 args[3];
please remove blank lines.
> +
> + u8 cmd;
> + u8 version;
> + u8 __rsv1[4];
> + u16 len;
I guess it should be __le16 here
> +
> + __le16 high_mark;
> + __le16 low_mark;
> + u8 __rsv2[12];
> + } __packed req = {
> + .args[0] = cpu_to_le32(MCU_WA_PARAM_RED_SETTING),
> + .cmd = RED_GLOBAL_TOKEN_WATERMARK,
> + .len = cpu_to_le16(sizeof(req) - sizeof(req.args)),
> +
> + .high_mark = cpu_to_le16(nbuf - 256),
> + .low_mark = cpu_to_le16(nbuf - 256 - 1536),
> + };
> +
> + return mt76_mcu_send_msg(&dev->mt76, MCU_WA_PARAM_CMD(SET), &req,
> + sizeof(req), false);
> +}
> +
> +int mt7915_mcu_set_red(struct mt7915_dev *dev, bool enabled)
> +{
> +#define RED_DISABLE 0
> +#define RED_BY_WA_ENABLE 2
> + int ret;
> + u32 red_type = enabled ? RED_BY_WA_ENABLE : RED_DISABLE;
> + __le32 req = cpu_to_le32(red_type);
> +
> + if (enabled) {
> + ret = mt7915_red_set_watermark(dev);
> + if (ret < 0)
> + return ret;
> + }
> +
> + ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(RED_ENABLE), &req,
> + sizeof(req), false);
> + if (ret < 0)
> + return ret;
> +
> + return mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
> + MCU_WA_PARAM_RED, enabled, 0);
> +}
> +
> int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
> {
> int ret;
> @@ -2339,8 +2390,7 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
> if (ret)
> return ret;
>
> - return mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
> - MCU_WA_PARAM_RED, 0, 0);
> + return mt7915_mcu_set_red(dev, mtk_wed_device_active(&dev->mt76.mmio.wed));
> }
>
> int mt7915_mcu_init(struct mt7915_dev *dev)
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> index 29b5434bfdb8..b9ea297f382c 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> @@ -278,6 +278,7 @@ enum {
> MCU_WA_PARAM_PDMA_RX = 0x04,
> MCU_WA_PARAM_CPU_UTIL = 0x0b,
> MCU_WA_PARAM_RED = 0x0e,
> + MCU_WA_PARAM_RED_SETTING = 0x40,
> };
>
> enum mcu_mmps_mode {
> --
> 2.18.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2023-01-05 12:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 11:47 [PATCH 1/2] wifi: mt76: mt7915: set sku initial value to zero Peter Chiu
2023-01-05 11:47 ` [PATCH 2/2] wifi: mt76: mt7915: wed: enable red per-band token drop Peter Chiu
2023-01-05 12:20 ` Lorenzo Bianconi [this message]
2023-01-05 13:54 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y7bApSqBT2LXdBhu@lore-desk \
--to=lorenzo@kernel.org \
--cc=chui-hao.chiu@mediatek.com \
--cc=evelyn.tsai@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=ryder.Lee@mediatek.com \
--cc=shayne.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).