public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: greearb@candelatech.com
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH v6 3/7] mt76: mt7915: add some per-station tx stats to ethtool
Date: Mon, 2 Aug 2021 17:58:03 +0200	[thread overview]
Message-ID: <YQgWCxrCbKAZq6U3@lore-desk> (raw)
In-Reply-To: <20210802150808.30113-3-greearb@candelatech.com>

[-- Attachment #1: Type: text/plain, Size: 4631 bytes --]

> From: Ben Greear <greearb@candelatech.com>
> 
> The tx status callback is not called for every frame, so
> those specific counters under-count, but at least they give
> some idea of what is going on.
> 
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
>  .../net/wireless/mediatek/mt76/mt7915/main.c  | 98 ++++++++++++++++++-
>  1 file changed, 93 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> index 994f84e9d7aa..88a8547e2e7f 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
> @@ -1068,6 +1068,35 @@ static const char mt7915_gstrings_stats[][ETH_GSTRING_LEN] = {
>  	"tx_msdu_pack_6",
>  	"tx_msdu_pack_7",
>  	"tx_msdu_pack_8",
> +	/* per vif counters */
> +	"v_tx_mpdu_attempts",
> +	"v_tx_mpdu_fail",
> +	"v_tx_mpdu_retry",
> +	"v_tx_mode_cck",
> +	"v_tx_mode_ofdm",
> +	"v_tx_mode_ht",
> +	"v_tx_mode_ht_gf",
> +	"v_tx_mode_vht",
> +	"v_tx_mode_he_su",
> +	"v_tx_mode_he_ext_su",
> +	"v_tx_mode_he_tb",
> +	"v_tx_mode_he_mu",
> +	"v_tx_bw_20",
> +	"v_tx_bw_40",
> +	"v_tx_bw_80",
> +	"v_tx_bw_160",
> +	"v_tx_mcs_0",
> +	"v_tx_mcs_1",
> +	"v_tx_mcs_2",
> +	"v_tx_mcs_3",
> +	"v_tx_mcs_4",
> +	"v_tx_mcs_5",
> +	"v_tx_mcs_6",
> +	"v_tx_mcs_7",
> +	"v_tx_mcs_8",
> +	"v_tx_mcs_9",
> +	"v_tx_mcs_10",
> +	"v_tx_mcs_11",
>  };
>  
>  #define MT7915_SSTATS_LEN ARRAY_SIZE(mt7915_gstrings_stats)
> @@ -1093,6 +1122,50 @@ int mt7915_get_et_sset_count(struct ieee80211_hw *hw,
>  	return 0;
>  }
>  
> +struct mt7915_ethtool_worker_info {
> +	u64 *data;
> +	struct mt7915_vif *mvif;
> +	int initial_stat_idx;
> +	int worker_stat_count;
> +	int sta_count;
> +};
> +
> +static void mt7915_ethtool_worker(void *wi_data, struct ieee80211_sta *sta)
> +{
> +	struct mt7915_ethtool_worker_info *wi = wi_data;
> +	struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
> +	int ei = wi->initial_stat_idx;
> +	int q;
> +	u64 *data = wi->data;
> +	struct mt7915_sta_stats *mstats = &msta->stats;
> +
> +	if (msta->vif != wi->mvif)
> +		return;
> +
> +	wi->sta_count++;
> +
> +	data[ei++] += mstats->tx_mpdu_attempts;
> +	data[ei++] += mstats->tx_mpdu_fail;
> +	data[ei++] += mstats->tx_mpdu_retry;
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_CCK];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_OFDM];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HT];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HT_GF];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_VHT];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_SU];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_EXT_SU];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_TB];
> +	data[ei++] += mstats->tx_mode[MT_PHY_TYPE_HE_MU];
> +
> +	for (q = 0; q < ARRAY_SIZE(mstats->tx_bw); q++)
> +		data[ei++] += mstats->tx_bw[q];
> +
> +	for (q = 0; q < 12; q++)
> +		data[ei++] += mstats->tx_mcs[q];
> +
> +	wi->worker_stat_count = ei - wi->initial_stat_idx;
> +}
> +
>  static
>  void mt7915_get_et_stats(struct ieee80211_hw *hw,
>  			 struct ieee80211_vif *vif,
> @@ -1100,10 +1173,8 @@ void mt7915_get_et_stats(struct ieee80211_hw *hw,
>  {
>  	struct mt7915_dev *dev = mt7915_hw_dev(hw);
>  	struct mt7915_phy *phy = mt7915_hw_phy(hw);
> -
> -	/* TODO:  These are mostly dev-wide stats at this point.
> -	 *  Get some per-vif stats?
> -	 */
> +	struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
> +	struct mt7915_ethtool_worker_info wi;
>  
>  	/* See mt7915_ampdu_stat_read_phy, etc */
>  	bool ext_phy = phy != &dev->phy;
> @@ -1161,7 +1232,24 @@ void mt7915_get_et_stats(struct ieee80211_hw *hw,
>  	for (i = 0; i < 8; i++)
>  		data[ei++] = mt76_rr(dev,  MT_PLE_AMSDU_PACK_MSDU_CNT(i));
>  
> -	WARN_ON(ei != MT7915_SSTATS_LEN);
> +	/* Add values for all stations owned by this vif */
> +	wi.data = data;
> +	wi.mvif = mvif;
> +	wi.initial_stat_idx = ei;
> +	wi.worker_stat_count = 0;
> +	wi.sta_count = 0;
> +
> +	ieee80211_iterate_stations_atomic(hw, mt7915_ethtool_worker, &wi);
> +
> +	if (wi.sta_count == 0)
> +		return;
> +
> +	ei += wi.worker_stat_count;
> +	if (ei != MT7915_SSTATS_LEN) {
> +		dev_err(dev->mt76.dev, "ei: %d  MT7915_SSTATS_LEN: %d",
> +			ei, (int)(MT7915_SSTATS_LEN));

you can drop () here

> +		WARN_ON_ONCE(ei != MT7915_SSTATS_LEN);

I think you can drop WARN_ON_ONCE here since we already have dev_err()

Regards,
Lorenzo

> +	}
>  }
>  
>  const struct ieee80211_ops mt7915_ops = {
> -- 
> 2.20.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2021-08-02 15:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 15:08 [PATCH v6 1/7] mt76: mt7915: add ethtool stats support greearb
2021-08-02 15:08 ` [PATCH v6 2/7] mt76: mt7915: add tx stats gathered from tx-status callbacks greearb
2021-08-02 15:08 ` [PATCH v6 3/7] mt76: mt7915: add some per-station tx stats to ethtool greearb
2021-08-02 15:58   ` Lorenzo Bianconi [this message]
2021-08-02 15:08 ` [PATCH v6 4/7] mt76: mt7915: add tx mu/su counters to mib greearb
2021-08-02 15:08 ` [PATCH v6 5/7] mt76: mt7915: fix he_mcs capabilities for 160mhz greearb
2021-08-02 15:08 ` [PATCH v6 6/7] mt76: mt7915: add more MIB registers greearb
2021-08-02 15:08 ` [PATCH v6 7/7] mt76: mt7915: add mib counters to ethtool stats greearb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YQgWCxrCbKAZq6U3@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=greearb@candelatech.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox