public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH 7/8] wifi: mt76: mt7996: implement driver specific get_txpower function
Date: Tue, 11 Mar 2025 14:55:22 +0100	[thread overview]
Message-ID: <Z9BAyuc6SLkS25NY@lore-desk> (raw)
In-Reply-To: <20250311103646.43346-7-nbd@nbd.name>

[-- Attachment #1: Type: text/plain, Size: 2383 bytes --]

On Mar 11, Felix Fietkau wrote:
> Fixes reporting tx power for vifs that don't have a channel context
> assigned. Report the tx power of a phy that is covered by the vif's
> radio mask.
> 
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
>  .../net/wireless/mediatek/mt76/mt7996/main.c  | 27 ++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> index 886b6ef3462b..89fc3f102555 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> @@ -602,6 +602,31 @@ static void mt7996_configure_filter(struct ieee80211_hw *hw,
>  	mutex_unlock(&dev->mt76.mutex);
>  }
>  
> +static int
> +mt7996_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int *dbm)

I guess the signature here should be:

static int
mt7996_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif, 
		   unsigned int link_id, int *dbm)
{
}

Regards,
Lorenzo

> +{
> +	struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv;
> +	struct mt7996_phy *phy = mt7996_vif_link_phy(&mvif->deflink);
> +	struct mt7996_dev *dev = mt7996_hw_dev(hw);
> +	struct wireless_dev *wdev;
> +	int n_chains, delta, i;
> +
> +	if (!phy) {
> +		wdev = ieee80211_vif_to_wdev(vif);
> +		for (i = 0; i < hw->wiphy->n_radio; i++)
> +			if (wdev->radio_mask & BIT(i))
> +				phy = dev->radio_phy[i];
> +
> +		if (!phy)
> +			return -EINVAL;
> +	}
> +
> +	n_chains = hweight16(phy->mt76->chainmask);
> +	delta = mt76_tx_power_nss_delta(n_chains);
> +	*dbm = DIV_ROUND_UP(phy->mt76->txpower_cur + delta, 2);
> +
> +	return 0;
> +}
>  static u8
>  mt7996_get_rates_table(struct mt7996_phy *phy, struct ieee80211_bss_conf *conf,
>  		       bool beacon, bool mcast)
> @@ -1651,7 +1676,7 @@ const struct ieee80211_ops mt7996_ops = {
>  	.remain_on_channel = mt76_remain_on_channel,
>  	.cancel_remain_on_channel = mt76_cancel_remain_on_channel,
>  	.release_buffered_frames = mt76_release_buffered_frames,
> -	.get_txpower = mt76_get_txpower,
> +	.get_txpower = mt7996_get_txpower,
>  	.channel_switch_beacon = mt7996_channel_switch_beacon,
>  	.get_stats = mt7996_get_stats,
>  	.get_et_sset_count = mt7996_get_et_sset_count,
> -- 
> 2.47.1
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2025-03-11 13:55 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-11 10:36 [PATCH 1/8] wifi: mt76: mt7996: revise TXS size Felix Fietkau
2025-03-11 10:36 ` [PATCH 2/8] wifi: mt76: mt7996: fix SER reset trigger on WED reset Felix Fietkau
2025-03-11 10:36 ` [PATCH 3/8] wifi: mt76: mt7996: remove unnecessary key->cipher check for BIP frames Felix Fietkau
2025-03-11 10:36 ` [PATCH 4/8] wifi: mt76: scan: set vif offchannel link for scanning/roc Felix Fietkau
2025-03-11 10:36 ` [PATCH 5/8] wifi: mt76: mt7996: use the correct vif " Felix Fietkau
2025-03-12  2:08   ` Ping-Ke Shih
2025-03-12  9:06     ` Felix Fietkau
2025-03-11 10:36 ` [PATCH 6/8] mt76: only mark tx-status-failed frames as ACKed on mt76x0/2 Felix Fietkau
2025-03-11 10:47   ` Felix Fietkau
2025-03-11 10:36 ` [PATCH 7/8] wifi: mt76: mt7996: implement driver specific get_txpower function Felix Fietkau
2025-03-11 13:55   ` Lorenzo Bianconi [this message]
2025-03-11 14:01     ` Felix Fietkau
2025-03-11 10:36 ` [PATCH 8/8] wifi: mt76: scan: fix setting tx_info fields Felix Fietkau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z9BAyuc6SLkS25NY@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=nbd@nbd.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox