linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: greearb@candelatech.com
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH] wifi: mt76: mt7921:  Support temp sensor.
Date: Thu, 18 May 2023 22:42:03 +0200	[thread overview]
Message-ID: <ZGaNm8mMfbqdtWa0@lore-desk> (raw)
In-Reply-To: <20230518200718.1367381-1-greearb@candelatech.com>

[-- Attachment #1: Type: text/plain, Size: 4744 bytes --]

> From: Ben Greear <greearb@candelatech.com>
> 
> Allow sensors tool to read radio's temperature, example:
> 
> mt7921_phy17-pci-1800
> Adapter: PCI adapter
> temp1:        +72.0°C
> 
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
>  .../net/wireless/mediatek/mt76/mt7921/init.c  | 53 +++++++++++++++++++
>  .../net/wireless/mediatek/mt76/mt7921/mcu.c   | 17 ++++++
>  .../wireless/mediatek/mt76/mt7921/mt7921.h    |  1 +
>  3 files changed, 71 insertions(+)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> index c15ce1a19000..18f0f2dfbbcf 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> @@ -2,6 +2,9 @@
>  /* Copyright (C) 2020 MediaTek Inc. */
>  
>  #include <linux/etherdevice.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/thermal.h>
>  #include <linux/firmware.h>
>  #include "mt7921.h"
>  #include "../mt76_connac2_mac.h"
> @@ -58,6 +61,50 @@ static const struct ieee80211_iface_combination if_comb_chanctx[] = {
>  	}
>  };
>  
> +static ssize_t mt7921_thermal_temp_show(struct device *dev,
> +					struct device_attribute *attr,
> +					char *buf)
> +{
> +	struct mt7921_phy *phy = dev_get_drvdata(dev);
> +	int i = to_sensor_dev_attr(attr)->index;
> +	int temperature;
> +
> +	switch (i) {

nit: you can drop i and just use to_sensor_dev_attr(attr)->index

> +	case 0:

I think you need to wake the device up here running mt7921_mutex_acquire
before sending the mcu command.

nit: you can move temperature variable definition here.

Regards,
Lorenzo

> +		temperature = mt7921_mcu_get_temperature(phy);
> +		if (temperature < 0)
> +			return temperature;
> +		/* display in millidegree celcius */
> +		return sprintf(buf, "%u\n", temperature * 1000);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7921_thermal_temp, 0);
> +
> +static struct attribute *mt7921_hwmon_attrs[] = {
> +	&sensor_dev_attr_temp1_input.dev_attr.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(mt7921_hwmon);
> +
> +static int mt7921_thermal_init(struct mt7921_phy *phy)
> +{
> +	struct wiphy *wiphy = phy->mt76->hw->wiphy;
> +	struct device *hwmon;
> +	const char *name;
> +
> +	name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7921_%s",
> +			      wiphy_name(wiphy));
> +
> +	hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy,
> +						       mt7921_hwmon_groups);
> +	if (IS_ERR(hwmon))
> +		return PTR_ERR(hwmon);
> +
> +	return 0;
> +}
> +
>  static void
>  mt7921_regd_notifier(struct wiphy *wiphy,
>  		     struct regulatory_request *request)
> @@ -384,6 +431,12 @@ static void mt7921_init_work(struct work_struct *work)
>  		return;
>  	}
>  
> +	ret = mt7921_thermal_init(&dev->phy);
> +	if (ret) {
> +		dev_err(dev->mt76.dev, "thermal_init failed\n");
> +		return;
> +	}
> +
>  	/* we support chip reset now */
>  	dev->hw_init_done = true;
>  
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 9c4dcc0e5a7c..abeedacc28f2 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -1346,6 +1346,23 @@ int mt7921_mcu_set_clc(struct mt7921_dev *dev, u8 *alpha2,
>  	return 0;
>  }
>  
> +int mt7921_mcu_get_temperature(struct mt7921_phy *phy)
> +{
> +	struct mt7921_dev *dev = phy->dev;
> +	struct {
> +		u8 ctrl_id;
> +		u8 action;
> +		u8 band_idx;
> +		u8 rsv[5];
> +	} req = {
> +		.ctrl_id = THERMAL_SENSOR_TEMP_QUERY,
> +		.band_idx = phy->mt76->band_idx,
> +	};
> +
> +	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(THERMAL_CTRL), &req,
> +				 sizeof(req), true);
> +}
> +
>  int mt7921_mcu_set_rxfilter(struct mt7921_dev *dev, u32 fif,
>  			    u8 bit_op, u32 bit_map)
>  {
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> index 706f00df6836..85fddf99d497 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
> @@ -568,6 +568,7 @@ int mt7921_mcu_set_sniffer(struct mt7921_dev *dev, struct ieee80211_vif *vif,
>  			   bool enable);
>  int mt7921_mcu_config_sniffer(struct mt7921_vif *vif,
>  			      struct ieee80211_chanctx_conf *ctx);
> +int mt7921_mcu_get_temperature(struct mt7921_phy *phy);
>  
>  int mt7921_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
>  				   enum mt76_txq_id qid, struct mt76_wcid *wcid,
> -- 
> 2.40.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2023-05-18 20:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-18 20:07 [PATCH] wifi: mt76: mt7921: Support temp sensor greearb
2023-05-18 20:42 ` Lorenzo Bianconi [this message]
2023-05-18 21:01   ` Ben Greear
2023-05-18 21:51     ` Lorenzo Bianconi
2023-05-19 14:19 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZGaNm8mMfbqdtWa0@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=greearb@candelatech.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).