public inbox for linux-wireless@vger.kernel.org
 help / color / mirror / Atom feed
From: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
To: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>,
	ath12k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Harish Rachakonda <quic_rachakon@quicinc.com>
Subject: Re: [PATCH ath-next] wifi: ath12k: Support channel change stats
Date: Tue, 7 Apr 2026 14:48:26 +0530	[thread overview]
Message-ID: <a5d079c9-e60e-4bc7-82c1-c62d1001d476@oss.qualcomm.com> (raw)
In-Reply-To: <20260326050641.3066562-1-roopni.devanathan@oss.qualcomm.com>



On 3/26/2026 10:36 AM, Roopni Devanathan wrote:
> From: Harish Rachakonda <quic_rachakon@quicinc.com>
> 
> Add support to request channel change stats from the firmware through
> HTT stats type 76. These stats give channel switch details like the
> channel that the radio changed to, its center frequency, time taken
> for the switch, chainmask details, etc.
> 
> Sample output:
> echo 76 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
> cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
> Channel Change Timings:
> |PRIMARY CHANNEL FREQ|BANDWIDTH CENTER FREQ|PHYMODE|TX_CHAINMASK|RX_CHAINMASK|SWITCH TIME(us)|INI(us)|TPC+CTL(us)|CAL(us)|MISC(us)|CTL(us)|SW PROFILE|
> |                5200|                 5200|     24|          15|          15|         448850|   2410|      10546| 434593|    1071|   1100|         4|
> |                5240|                 5240|     24|          15|          15|         450730|   4106|      10524| 434528|    1306|   1150|         4|
> |                5180|                 5210|     26|          15|          15|         467894|   4764|      10438| 451101|    1337|   1508|         4|
> |                5200|                 5200|      0|          15|          15|          13838|   2692|       1736|   8558|     686|    802|         6|
> |                5180|                 5180|      0|          15|          15|          13465|   3207|        855|   8579|     578|    760|         6|
> |                5200|                 5200|     24|          15|          15|         570321|   2441|      10439| 555661|    1574|    949|         4|
> 
> Note: WCN7850 firmware does not support HTT stats type 76.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Harish Rachakonda <quic_rachakon@quicinc.com>
> Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
> ---
>   .../wireless/ath/ath12k/debugfs_htt_stats.c   | 72 +++++++++++++++++++
>   .../wireless/ath/ath12k/debugfs_htt_stats.h   | 26 +++++++
>   2 files changed, 98 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.c b/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.c
> index 7f6ca07fb335..b772181a496e 100644
> --- a/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.c
> +++ b/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.c
> @@ -5722,6 +5722,75 @@ ath12k_htt_print_tx_hwq_stats_cmn_tlv(const void *tag_buf, u16 tag_len,
>   	stats_req->buf_len = len;
>   }
>   
> +static void
> +ath12k_htt_print_chan_switch_stats_tlv(const void *tag_buf, u16 tag_len,
> +				       struct debug_htt_stats_req *stats_req)
> +{
> +	const struct ath12k_htt_chan_switch_stats_tlv *sbuf = tag_buf;
> +	u32 buf_len = ATH12K_HTT_STATS_BUF_SIZE;
> +	u32 switch_freq, switch_profile;
> +	u32 len = stats_req->buf_len;
> +	u8 *buf = stats_req->buf;
> +	u8 i;
> +
> +	if (tag_len < sizeof(*sbuf))
> +		return;
> +
> +	i = min(le32_to_cpu(sbuf->switch_count), ATH12K_HTT_CHAN_SWITCH_STATS_BUF_LEN);
> +	if (!i)
> +		return;
> +
> +	len += scnprintf(buf + len, buf_len - len, "Channel Change Timings:\n");
> +	len += scnprintf(buf + len, buf_len - len,
> +			 "|%-20s|%-21s|%-7s|%-12s|%-12s|%-15s|",
> +			 "PRIMARY CHANNEL FREQ", "BANDWIDTH CENTER FREQ", "PHYMODE",
> +			 "TX_CHAINMASK", "RX_CHAINMASK", "SWITCH TIME(us)");
> +	len += scnprintf(buf + len, buf_len - len,
> +			 "%-7s|%-11s|%-7s|%-8s|%-7s|%-10s|\n",
> +			 "INI(us)", "TPC+CTL(us)", "CAL(us)", "MISC(us)", "CTL(us)",
> +			 "SW PROFILE");
> +
> +	/*
> +	 * sbuf->switch_count has the number of successful channel changes. The firmware
> +	 * sends the record of channel change in such a way that sbuf->chan_stats[0] will
> +	 * point to the channel change that occurred first and the recent channel change
> +	 * records will be stored in sbuf->chan_stats[9]. As and when new channel change
> +	 * occurs, sbuf->chan_stats[0] will be replaced by records from the next index,
> +	 * sbuf->chan_stats[1]. While printing the records, reverse chronological order
> +	 * is followed, i.e., the most recent channel change records are printed first
> +	 * and the oldest one, last.
> +	 */
> +	while (i--) {
> +		switch_freq = le32_to_cpu(sbuf->chan_stats[i].chan_switch_freq);
> +		switch_profile = le32_to_cpu(sbuf->chan_stats[i].chan_switch_profile);
> +
> +		len += scnprintf(buf + len, buf_len - len,
> +				 "|%20u|%21u|%7u|%12u|%12u|%15u|",
> +				 u32_get_bits(switch_freq,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_BW_MHZ),
> +				 u32_get_bits(switch_freq,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_BAND_FREQ),
> +				 u32_get_bits(switch_profile,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_PHY_MODE),
> +				 u32_get_bits(switch_profile,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_TX_CHAINMASK),
> +				 u32_get_bits(switch_profile,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_RX_CHAINMASK),
> +				 le32_to_cpu(sbuf->chan_stats[i].chan_switch_time));
> +		len += scnprintf(buf + len, buf_len - len,
> +				 "%7u|%11u|%7u|%8u|%7u|%10u|\n",
> +				 le32_to_cpu(sbuf->chan_stats[i].ini_module_time),
> +				 le32_to_cpu(sbuf->chan_stats[i].tpc_module_time),
> +				 le32_to_cpu(sbuf->chan_stats[i].cal_module_time),
> +				 le32_to_cpu(sbuf->chan_stats[i].misc_module_time),
> +				 le32_to_cpu(sbuf->chan_stats[i].ctl_module_time),
> +				 u32_get_bits(switch_profile,
> +					      ATH12K_HTT_STATS_CHAN_SWITCH_SW_PROFILE));
> +	}
> +
> +	stats_req->buf_len = len;
> +}
> +
>   static int ath12k_dbg_htt_ext_stats_parse(struct ath12k_base *ab,
>   					  u16 tag, u16 len, const void *tag_buf,
>   					  void *user_data)
> @@ -6024,6 +6093,9 @@ static int ath12k_dbg_htt_ext_stats_parse(struct ath12k_base *ab,
>   	case HTT_STATS_TX_HWQ_CMN_TAG:
>   		ath12k_htt_print_tx_hwq_stats_cmn_tlv(tag_buf, len, stats_req);
>   		break;
> +	case HTT_STATS_CHAN_SWITCH_STATS_TAG:
> +		ath12k_htt_print_chan_switch_stats_tlv(tag_buf, len, stats_req);
> +		break;
>   	default:
>   		break;
>   	}
> diff --git a/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.h b/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.h
> index bfabe6500d44..82ab7b9e4db9 100644
> --- a/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.h
> +++ b/drivers/net/wireless/ath/ath12k/debugfs_htt_stats.h
> @@ -164,6 +164,7 @@ enum ath12k_dbg_htt_ext_stats_type {
>   	ATH12K_DBG_HTT_PDEV_MLO_IPC_STATS			= 64,
>   	ATH12K_DBG_HTT_EXT_PDEV_RTT_RESP_STATS			= 65,
>   	ATH12K_DBG_HTT_EXT_PDEV_RTT_INITIATOR_STATS		= 66,
> +	ATH12K_DBG_HTT_EXT_CHAN_SWITCH_STATS			= 76,
>   
>   	/* keep this last */
>   	ATH12K_DBG_HTT_NUM_EXT_STATS,
> @@ -267,6 +268,7 @@ enum ath12k_dbg_htt_tlv_tag {
>   	HTT_STATS_PDEV_RTT_HW_STATS_TAG			= 196,
>   	HTT_STATS_PDEV_RTT_TBR_SELFGEN_QUEUED_STATS_TAG	= 197,
>   	HTT_STATS_PDEV_RTT_TBR_CMD_RESULT_STATS_TAG	= 198,
> +	HTT_STATS_CHAN_SWITCH_STATS_TAG			= 213,
>   
>   	HTT_STATS_MAX_TAG,
>   };
> @@ -2156,4 +2158,28 @@ struct htt_tx_hwq_stats_cmn_tlv {
>   	__le32 txq_timeout;
>   } __packed;
>   
> +#define ATH12K_HTT_CHAN_SWITCH_STATS_BUF_LEN	10
> +
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_BW_MHZ		GENMASK(15, 0)
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_BAND_FREQ		GENMASK(31, 16)
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_PHY_MODE		GENMASK(7, 0)
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_TX_CHAINMASK	GENMASK(15, 8)
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_RX_CHAINMASK	GENMASK(23, 16)
> +#define ATH12K_HTT_STATS_CHAN_SWITCH_SW_PROFILE		GENMASK(31, 24)
> +
> +struct ath12k_htt_chan_switch_stats_tlv {
> +	struct {
> +		__le32 chan_switch_freq;
> +		__le32 chan_switch_profile;
> +		__le32 chan_switch_time;
> +		__le32 cal_module_time;
> +		__le32 ini_module_time;
> +		__le32 tpc_module_time;
> +		__le32 misc_module_time;
> +		__le32 ctl_module_time;
> +		__le32 reserved;
> +	} chan_stats[ATH12K_HTT_CHAN_SWITCH_STATS_BUF_LEN];
> +	__le32 switch_count; /* shows how many channel changes have occurred */
> +} __packed;
> +
>   #endif
> 
> base-commit: 37538641dac955f6690372f0ebb94e5e14a23418

Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>



  parent reply	other threads:[~2026-04-07  9:18 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-26  5:06 [PATCH ath-next] wifi: ath12k: Support channel change stats Roopni Devanathan
2026-04-07  3:23 ` Baochen Qiang
2026-04-07 15:22   ` Jeff Johnson
2026-04-07  9:18 ` Rameshkumar Sundaram [this message]
2026-04-08  0:50 ` Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a5d079c9-e60e-4bc7-82c1-c62d1001d476@oss.qualcomm.com \
    --to=rameshkumar.sundaram@oss.qualcomm.com \
    --cc=ath12k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=quic_rachakon@quicinc.com \
    --cc=roopni.devanathan@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox