From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from www.telegraphics.com.au ([204.15.192.19]:65215 "EHLO mail.telegraphics.com.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753222Ab0I1GWq (ORCPT ); Tue, 28 Sep 2010 02:22:46 -0400 Date: Tue, 28 Sep 2010 16:22:32 +1000 (EST) From: Finn Thain To: "Justin P. Mattock" cc: trivial@kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-usb@vger.kernel.org, linux-scsi@vger.kernel.org, linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org, dri-devel@lists.freedesktop.org, linux-ide@vger.kernel.org, "Maciej W. Rozycki" , Geert Uytterhoeven , Randy Dunlap , Matt Turner , Dimitry Torokhov , Mike Frysinger Subject: Re: [RFC v5]update broken web addresses in the kernel. In-Reply-To: <1285647599-14719-1-git-send-email-justinmattock@gmail.com> Message-ID: References: <1285647599-14719-1-git-send-email-justinmattock@gmail.com> MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1719167625-1285654952=:276" Sender: linux-wireless-owner@vger.kernel.org List-ID: This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --0-1719167625-1285654952=:276 Content-Type: TEXT/PLAIN; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Looks good to me. Finn On Mon, 27 Sep 2010, Justin P. Mattock wrote: > Below is an updated patch to fix broken web addresses in the kernel.=20 > Please let me know if I missed anything, and I'll go back and fix it. > and lastly Thanks for all the help with this...=20 >=20 > Signed-off-by: Justin P. Mattock > Cc: Maciej W. Rozycki > Cc: Geert Uytterhoeven > Cc: Finn Thain > Cc: Randy Dunlap > Cc: Matt Turner > Cc: Dimitry Torokhov > Cc: Mike Frysinger > Acked-by: Ben Pfaff > Acked-by: Hans J. Koch >=20 > --- > drivers/ata/pata_it821x.c | 4 ++-- > drivers/atm/Kconfig | 2 +- > drivers/char/agp/Kconfig | 2 +- > drivers/char/agp/i460-agp.c | 2 +- > drivers/char/apm-emulation.c | 4 ++-- > drivers/char/ipmi/ipmi_bt_sm.c | 2 +- > drivers/char/ipmi/ipmi_si_intf.c | 3 +-- > drivers/char/n_r3964.c | 1 - > drivers/char/pcmcia/Kconfig | 4 ++-- > drivers/char/tpm/Kconfig | 2 +- > drivers/char/tpm/tpm_infineon.c | 2 +- > drivers/edac/edac_device_sysfs.c | 2 +- > drivers/edac/i82443bxgx_edac.c | 2 +- > drivers/firmware/Kconfig | 4 ++-- > drivers/firmware/edd.c | 2 +- > drivers/firmware/pcdp.h | 4 ++-- > drivers/gpu/drm/drm_modes.c | 2 +- > drivers/hwmon/adm1025.c | 2 +- > drivers/hwmon/adm1026.c | 2 +- > drivers/hwmon/f75375s.c | 4 ++-- > drivers/hwmon/g760a.c | 2 +- > drivers/hwmon/hwmon-vid.c | 2 +- > drivers/ide/hpt366.c | 2 +- > drivers/ide/ht6560b.c | 1 - > drivers/infiniband/Kconfig | 4 ++-- > drivers/infiniband/hw/cxgb3/Kconfig | 2 +- > drivers/infiniband/hw/cxgb4/Kconfig | 2 +- > drivers/infiniband/ulp/iser/Kconfig | 2 +- > drivers/input/joystick/gamecon.c | 3 +-- > drivers/input/misc/cm109.c | 2 +- > drivers/input/mouse/Kconfig | 1 + > drivers/input/mouse/touchkit_ps2.c | 4 ++-- > drivers/input/touchscreen/mk712.c | 2 +- > drivers/isdn/i4l/isdn_audio.c | 2 +- > drivers/macintosh/therm_adt746x.c | 6 +++--- > drivers/media/IR/keymaps/rc-manli.c | 1 - > drivers/media/dvb/ttpci/av7110.c | 10 ++-------- > drivers/media/dvb/ttpci/av7110_av.c | 2 +- > drivers/media/dvb/ttpci/av7110_ca.c | 2 +- > drivers/media/dvb/ttpci/av7110_hw.c | 2 +- > drivers/media/dvb/ttpci/av7110_v4l.c | 2 +- > drivers/media/dvb/ttpci/budget-av.c | 2 +- > drivers/media/dvb/ttpci/budget-ci.c | 2 +- > drivers/media/dvb/ttpci/budget-core.c | 2 +- > drivers/media/dvb/ttpci/budget-patch.c | 2 +- > drivers/media/dvb/ttpci/budget.c | 2 +- > drivers/media/radio/radio-maxiradio.c | 2 +- > drivers/media/radio/radio-typhoon.c | 2 -- > drivers/media/video/Kconfig | 2 +- > drivers/media/video/cafe_ccic.c | 2 +- > drivers/media/video/cx18/cx18-cards.c | 2 +- > drivers/media/video/cx23885/cx23885-417.c | 2 +- > drivers/media/video/cx88/cx88-blackbird.c | 2 +- > drivers/media/video/ivtv/ivtv-cards.c | 2 +- > drivers/media/video/mxb.c | 2 +- > drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 - > drivers/misc/Kconfig | 4 ++-- > drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- > drivers/mtd/devices/lart.c | 2 +- > drivers/mtd/ftl.c | 2 +- > drivers/mtd/maps/Kconfig | 4 ++-- > drivers/mtd/nand/cafe_nand.c | 2 +- > drivers/net/Kconfig | 21 ++++++++++-------= ---- > drivers/net/appletalk/Kconfig | 2 +- > drivers/net/atp.c | 2 +- > drivers/net/epic100.c | 4 ++-- > drivers/net/hamradio/Kconfig | 2 +- > drivers/net/ibmlana.c | 2 +- > drivers/net/irda/donauboe.h | 2 +- > drivers/net/pci-skeleton.c | 2 +- > drivers/net/pcmcia/3c574_cs.c | 2 +- > drivers/net/sc92031.c | 2 +- > drivers/net/tlan.c | 2 +- > drivers/net/tokenring/tms380tr.c | 2 +- > drivers/net/tulip/Kconfig | 2 +- > drivers/net/usb/plusb.c | 2 +- > drivers/net/wan/Kconfig | 2 +- > drivers/net/wireless/ath/ath5k/ath5k.h | 2 +- > drivers/net/wireless/ath/ath5k/reg.h | 1 - > drivers/net/wireless/p54/Kconfig | 6 +++--- > drivers/net/wireless/prism54/islpci_hotplug.c | 2 +- > drivers/parisc/README.dino | 3 +-- > drivers/pci/quirks.c | 3 ++- > drivers/pcmcia/yenta_socket.c | 2 +- > drivers/pnp/pnpbios/proc.c | 1 - > drivers/scsi/Kconfig | 9 +++++---- > drivers/serial/8250.c | 2 +- > drivers/serial/bfin_sport_uart.c | 2 +- > drivers/serial/bfin_sport_uart.h | 2 +- > drivers/serial/uartlite.c | 2 +- > drivers/staging/asus_oled/README | 2 +- > drivers/staging/asus_oled/asus_oled.c | 2 +- > drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +- > drivers/staging/comedi/drivers/daqboard2000.c | 4 ++-- > drivers/staging/comedi/drivers/ni_labpc.c | 2 +- > drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- > drivers/staging/comedi/drivers/plx9080.h | 2 +- > drivers/staging/comedi/drivers/rtd520.c | 2 +- > drivers/staging/quickstart/quickstart.c | 3 +-- > drivers/uio/Kconfig | 6 +++--- > drivers/usb/serial/Kconfig | 4 ++-- > drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------ > drivers/usb/serial/keyspan.c | 2 +- > drivers/usb/serial/keyspan.h | 2 +- > drivers/usb/serial/mct_u232.h | 9 ++++----- > drivers/usb/storage/Kconfig | 2 +- > drivers/video/Kconfig | 10 +++++----- > drivers/video/arcfb.c | 1 - > drivers/video/epson1355fb.c | 2 +- > drivers/video/fbcvt.c | 2 +- > drivers/video/hecubafb.c | 2 +- > drivers/video/metronomefb.c | 2 +- > firmware/keyspan_pda/keyspan_pda.S | 2 +- > firmware/keyspan_pda/xircom_pgs.S | 2 +- > fs/hostfs/hostfs.h | 7 +------ > fs/partitions/ldm.c | 2 +- > fs/partitions/ldm.h | 2 +- > fs/reiserfs/Kconfig | 6 ++++-- > fs/reiserfs/README | 2 +- > include/crypto/gf128mul.h | 4 ++-- > include/linux/fdreg.h | 2 +- > include/linux/if_infiniband.h | 2 +- > include/linux/n_r3964.h | 1 - > net/ax25/Kconfig | 8 ++++---- > net/ipv4/Kconfig | 4 ++-- > net/ipv4/cipso_ipv4.c | 2 +- > net/ipv4/fib_trie.c | 2 +- > net/ipv4/netfilter/Kconfig | 2 +- > net/ipv4/tcp_illinois.c | 2 +- > net/ipv4/tcp_input.c | 4 ++-- > net/ipv4/tcp_veno.c | 2 +- > net/netfilter/nf_conntrack_proto_tcp.c | 4 ++-- > sound/oss/ac97_codec.c | 7 ++----- > sound/pci/ens1370.c | 2 +- > sound/pci/intel8x0.c | 2 +- > 135 files changed, 184 insertions(+), 209 deletions(-) >=20 > diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c > index bf88f71..aa0e0c5 100644 > --- a/drivers/ata/pata_it821x.c > +++ b/drivers/ata/pata_it821x.c > @@ -15,8 +15,8 @@ > * May be copied or modified under the terms of the GNU General Public = License > * Based in part on the ITE vendor provided SCSI driver. > * > - * Documentation available from > - * =09http://www.ite.com.tw/pc/IT8212F_V04.pdf > + * Documentation available from IT8212F_V04.pdf > + * =09http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3D3&ID=3D5,= 91 > * Some other documents are NDA. > * > * The ITE8212 isn't exactly a standard IDE controller. It has two > diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig > index be7461c..31c6010 100644 > --- a/drivers/atm/Kconfig > +++ b/drivers/atm/Kconfig > @@ -301,7 +301,7 @@ config ATM_IA > =09 control memory (128K-1KVC, 512K-4KVC), the size of the packet > =09 memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, > =09 UTP155, UTP25, DS3 and E3). Go to: > -=09 =09 > +=09 =09 > =09 for more info about the cards. Say Y (or M to compile as a module > =09 named iphase) here if you have one of these cards. > =20 > diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig > index 4b66c69..c8ad619 100644 > --- a/drivers/char/agp/Kconfig > +++ b/drivers/char/agp/Kconfig > @@ -34,7 +34,7 @@ config AGP_ALI > =09 X on the following ALi chipsets. The supported chipsets > =09 include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. > =09 For the ALi-chipset question, ALi suggests you refer to > -=09 . > +=09 . > =20 > =09 The M1541 chipset can do AGP 1x and 2x, but note that there is an > =09 acknowledged incompatibility with Matrox G200 cards. Due to > diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c > index e763d33..75b763c 100644 > --- a/drivers/char/agp/i460-agp.c > +++ b/drivers/char/agp/i460-agp.c > @@ -1,7 +1,7 @@ > /* > * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsy= stem) of > * the "Intel 460GTX Chipset Software Developer's Manual": > - * http://developer.intel.com/design/itanium/downloads/24870401s.htm > + * http://www.intel.com/design/archives/itanium/downloads/248704.htm=20 > */ > /* > * 460GX support by Chris Ahna > diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c > index 033e150..0848ca9 100644 > --- a/drivers/char/apm-emulation.c > +++ b/drivers/char/apm-emulation.c > @@ -7,8 +7,8 @@ > * Intel Corporation, Microsoft Corporation. Advanced Power Management > * (APM) BIOS Interface Specification, Revision 1.2, February 1996. > * > - * [This document is available from Microsoft at: > - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] > + * This document is available from Microsoft at: > + * http://www.microsoft.com/whdc/archive/amp_12.mspx > */ > #include > #include > diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_s= m.c > index 7b98c06..3ed20e8 100644 > --- a/drivers/char/ipmi/ipmi_bt_sm.c > +++ b/drivers/char/ipmi/ipmi_bt_sm.c > @@ -2,7 +2,7 @@ > * ipmi_bt_sm.c > * > * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, pa= rt > - * of the driver architecture at http://sourceforge.net/project/openipm= i > + * of the driver architecture at http://sourceforge.net/projects/openip= mi=20 > * > * Author:=09Rocky Craig > * > diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si= _intf.c > index 7bd7c45..3e94c37 100644 > --- a/drivers/char/ipmi/ipmi_si_intf.c > +++ b/drivers/char/ipmi/ipmi_si_intf.c > @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info= ) > =20 > /* > * Defined at > - * http://h21007.www2.hp.com/portal/download/files > - * /unprot/hpspmi.pdf > + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf=20 > */ > struct SPMITable { > =09s8=09Signature[4]; > diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c > index a98290d..88dda0c 100644 > --- a/drivers/char/n_r3964.c > +++ b/drivers/char/n_r3964.c > @@ -4,7 +4,6 @@ > * Copyright by=20 > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig > index ffa0efc..6614416 100644 > --- a/drivers/char/pcmcia/Kconfig > +++ b/drivers/char/pcmcia/Kconfig > @@ -28,7 +28,7 @@ config CARDMAN_4000 > =20 > =09 This kernel driver requires additional userspace support, either > =09 by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), > -=09 or via the cm4000 backend of OpenCT (http://www.opensc.com/). > +=09 or via the cm4000 backend of OpenCT (http://www.opensc-project.org/= opensc). > =20 > config CARDMAN_4040 > =09tristate "Omnikey CardMan 4040 support" > @@ -41,7 +41,7 @@ config CARDMAN_4040 > =09 in I/O space. To use the kernel driver, you will need either the > =09 PC/SC ifdhandler provided from the Omnikey homepage > =09 (http://www.omnikey.com/), or a current development version of Open= CT > -=09 (http://www.opensc.org/). > +=09 (http://www.opensc-project.org/opensc). > =20 > config IPWIRELESS > =09tristate "IPWireless 3G UMTS PCMCIA card support" > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig > index 4dc338f..f6595ab 100644 > --- a/drivers/char/tpm/Kconfig > +++ b/drivers/char/tpm/Kconfig > @@ -58,6 +58,6 @@ config TCG_INFINEON > =09 To compile this driver as a module, choose M here; the module > =09 will be called tpm_infineon. > =09 Further information on this driver and the supported hardware > -=09 can be found at http://www.prosec.rub.de/tpm > +=09 can be found at http://www.trust.rub.de/projects/linux-device-drive= r-infineon-tpm/=20 > =20 > endif # TCG_TPM > diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infin= eon.c > index f584407..76da32e 100644 > --- a/drivers/char/tpm/tpm_infineon.c > +++ b/drivers/char/tpm/tpm_infineon.c > @@ -7,7 +7,7 @@ > * Copyright (C) 2005, Marcel Selhorst > * Sirrix AG - security technologies, http://www.sirrix.com and > * Applied Data Security Group, Ruhr-University Bochum, Germany > - * Project-Homepage: http://www.prosec.rub.de/tpm > + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-drive= r-infineon-tpm/=20 > * > * This program is free software; you can redistribute it and/or > * modify it under the terms of the GNU General Public License as > diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_= sysfs.c > index 0709681..413f0df 100644 > --- a/drivers/edac/edac_device_sysfs.c > +++ b/drivers/edac/edac_device_sysfs.c > @@ -1,7 +1,7 @@ > /* > * file for managing the edac_device class of devices for EDAC > * > - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) > + * (C) 2007 SoftwareBitMaker=20 > * > * This file may be distributed under the terms of the > * GNU General Public License. > diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_eda= c.c > index a2fa1fe..678405a 100644 > --- a/drivers/edac/i82443bxgx_edac.c > +++ b/drivers/edac/i82443bxgx_edac.c > @@ -12,7 +12,7 @@ > * 440GX fix by Jason Uhlenkott . > * > * Written with reference to 82443BX Host Bridge Datasheet: > - * http://www.intel.com/design/chipsets/440/documentation.htm > + * http://download.intel.com/design/chipsets/datashts/29063301.pdf=20 > * references to this document given in []. > * > * This module doesn't support the 440LX, but it may be possible to > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig > index 280c9b5..32e67a1 100644 > --- a/drivers/firmware/Kconfig > +++ b/drivers/firmware/Kconfig > @@ -73,8 +73,8 @@ config EFI_PCDP > =09 on how the driver discovers devices. > =20 > =09 You must also enable the appropriate drivers (serial, VGA, etc.) > - > -=09 See > +=09 See DIG64_HCDPv20_042804.pdf available from > +=09 > =20 > config DELL_RBU > =09tristate "BIOS update support for DELL systems via sysfs" > diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c > index f287fe7..96c25d9 100644 > --- a/drivers/firmware/edd.c > +++ b/drivers/firmware/edd.c > @@ -15,7 +15,7 @@ > * made in setup.S, copied to safe structures in setup.c, > * and presents it in sysfs. > * > - * Please see http://linux.dell.com/edd30/results.html for > + * Please see http://linux.dell.com/edd/results.html for > * the list of BIOSs which have been reported to implement EDD. > * > * This program is free software; you can redistribute it and/or modify > diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h > index ce910d6..e098c6e 100644 > --- a/drivers/firmware/pcdp.h > +++ b/drivers/firmware/pcdp.h > @@ -1,8 +1,8 @@ > /* > * Definitions for PCDP-defined console devices > * > - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf > - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf > + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.= ), > + * please see > * > * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. > *=09Khalid Aziz > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 949326d..58e65f9 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); > * according to the hdisplay, vdisplay, vrefresh. > * It is based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls=20 > * > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt= =2Ec. > * What I have done is to translate it by using integer calculation. > diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c > index 251b631..60befc0 100644 > --- a/drivers/hwmon/adm1025.c > +++ b/drivers/hwmon/adm1025.c > @@ -12,7 +12,7 @@ > * resolution of about 0.5% of the nominal value). Temperature values ar= e > * reported with a 1 deg resolution and a 3 deg accuracy. Complete > * datasheet can be obtained from Analog's website at: > - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,AD= M1025,00.html > + * http://www.onsemi.com/PowerSolutions/product.do?id=3DADM1025=20 > * > * This driver also supports the ADM1025A, which differs from the ADM102= 5 > * only in that it has "open-drain VID inputs while the ADM1025 has > diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c > index 65335b2..4bf969c 100644 > --- a/drivers/hwmon/adm1026.c > +++ b/drivers/hwmon/adm1026.c > @@ -6,7 +6,7 @@ > =20 > Chip details at: > =20 > - > + > =20 > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c > index 9638d58..95cbfb3 100644 > --- a/drivers/hwmon/f75375s.c > +++ b/drivers/hwmon/f75375s.c > @@ -6,10 +6,10 @@ > * Datasheets available at: > * > * f75375: > - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf > + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf=20 > * > * f75373: > - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf > + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c > index 1f63d1a..1d6a6fa 100644 > --- a/drivers/hwmon/g760a.c > +++ b/drivers/hwmon/g760a.c > @@ -5,7 +5,7 @@ > Copyright (C) 2007 Herbert Valerio Riedel > =20 > Complete datasheet is available at GMT's website: > - http://www.gmt.com.tw/datasheet/g760a.pdf > + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf=20 > =20 > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c > index bf0862a..897702d 100644 > --- a/drivers/hwmon/hwmon-vid.c > +++ b/drivers/hwmon/hwmon-vid.c > @@ -38,7 +38,7 @@ > * available at http://developer.intel.com/. > * > * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, > - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_do= cs/26094.PDF > + * http://developer.amd.com/documentation/articles/pages/1212200690_2.as= px=20 > * Table 74. VID Code Voltages > * This corresponds to an arbitrary VRM code of 24 in the functions belo= w. > * These CPU models (K8 revision <=3D E) have 5 VID pins. See also: > diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c > index 4516369..97d98fb 100644 > --- a/drivers/ide/hpt366.c > +++ b/drivers/ide/hpt366.c > @@ -12,7 +12,7 @@ > * > * > * HighPoint has its own drivers (open source except for the RAID part) > - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. > + * available from http://www.highpoint-tech.com/USA_new/service_support.= htm=20 > * This may be useful to anyone wanting to work on this driver, however = do not > * trust them too much since the code tends to become less and less mea= ningful > * as the time passes... :-/ > diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c > index d81e496..808bcdc 100644 > --- a/drivers/ide/ht6560b.c > +++ b/drivers/ide/ht6560b.c > @@ -10,7 +10,6 @@ > * Author: Mikko Ala-Fossi > * Jan Evert van Grootheest > * > - * Try: http://www.maf.iki.fi/~maf/ht6560b/ > */ > =20 > #define DRV_NAME=09"ht6560b" > diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig > index 89d70de..6e35ecc 100644 > --- a/drivers/infiniband/Kconfig > +++ b/drivers/infiniband/Kconfig > @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD > =09 Userspace InfiniBand Management Datagram (MAD) support. This > =09 is the kernel side of the userspace MAD support, which allows > =09 userspace processes to send and receive MADs. You will also > -=09 need libibumad from . > +=09 need libibumad from . > =20 > config INFINIBAND_USER_ACCESS > =09tristate "InfiniBand userspace access (verbs and CM)" > @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS > =09 to set up connections and directly access InfiniBand > =09 hardware for fast-path operations. You will also need > =09 libibverbs, libibcm and a hardware driver library from > -=09 . > +=09 . > =20 > config INFINIBAND_USER_MEM > =09bool > diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/= cxgb3/Kconfig > index 2acec3f..2b6352b 100644 > --- a/drivers/infiniband/hw/cxgb3/Kconfig > +++ b/drivers/infiniband/hw/cxgb3/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 > =09 our website at . > =20 > =09 For customer support, please visit our customer support page at > -=09 . > +=09 . > =20 > =09 Please send feedback to . > =20 > diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/= cxgb4/Kconfig > index ccb85ea..6b7e6c5 100644 > --- a/drivers/infiniband/hw/cxgb4/Kconfig > +++ b/drivers/infiniband/hw/cxgb4/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 > =09 our website at . > =20 > =09 For customer support, please visit our customer support page at > -=09 . > +=09 . > =20 > =09 Please send feedback to . > =20 > diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp= /iser/Kconfig > index b411c51..d00af71 100644 > --- a/drivers/infiniband/ulp/iser/Kconfig > +++ b/drivers/infiniband/ulp/iser/Kconfig > @@ -9,4 +9,4 @@ config INFINIBAND_ISER > =20 > =09 The iSER protocol is defined by IETF. > =09 See > -=09 and > +=09 and > diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/ga= mecon.c > index 0ffaf2c..e68e497 100644 > --- a/drivers/input/joystick/gamecon.c > +++ b/drivers/input/joystick/gamecon.c > @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) > * PSX support > * > * See documentation at: > - *=09http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt > + *=09http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt=09 > *=09http://www.gamesx.com/controldata/psxcont/psxcont.htm > - *=09ftp://milano.usal.es/pablo/ > * > */ > =20 > diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c > index 2b0eba6..b09c7d1 100644 > --- a/drivers/input/misc/cm109.c > +++ b/drivers/input/misc/cm109.c > @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) > =20 > /* > * Keymap for ATCom AU-100 > - * http://www.atcom.cn/En_products_AU100.html > + * http://www.atcom.cn/products.html=20 > * http://www.packetizer.com/products/au100/ > * http://www.voip-info.org/wiki/view/AU-100 > * > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index c714ca2..bf5fd7f 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -30,6 +30,7 @@ config MOUSE_PS2 > =09=09 > =09 and a new version of GPM at: > =09=09 > +=09=09 > =09 to take advantage of the advanced features of the touchpad. > =20 > =09 If unsure, say Y. > diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/tou= chkit_ps2.c > index 88121c5..1fd8f5e 100644 > --- a/drivers/input/mouse/touchkit_ps2.c > +++ b/drivers/input/mouse/touchkit_ps2.c > @@ -21,8 +21,8 @@ > * > * Based upon touchkitusb.c > * > - * Vendor documentation is available in support section of: > - * http://www.egalax.com.tw/ > + * Vendor documentation is available at: > + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_= v2.0.pdf=20 > */ > =20 > #include > diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscree= n/mk712.c > index efd3aeb..36e57de 100644 > --- a/drivers/input/touchscreen/mk712.c > +++ b/drivers/input/touchscreen/mk712.c > @@ -17,7 +17,7 @@ > * found in Gateway AOL Connected Touchpad computers. > * > * Documentation for ICS MK712 can be found at: > - *=09http://www.icst.com/pdf/mk712.pdf > + *=09http://www.idt.com/products/getDoc.cfm?docID=3D18713923 > */ > =20 > /* > diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.= c > index 861bdf3..d501393 100644 > --- a/drivers/isdn/i4l/isdn_audio.c > +++ b/drivers/isdn/i4l/isdn_audio.c > @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsig= ned char *in, > =20 > /* > * Goertzel algorithm. > - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict= / > + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/=20 > * for more info. > * Result is stored into an sk_buff and queued up for later > * evaluation. > diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_= adt746x.c > index d0d2213..9e3e2c5 100644 > --- a/drivers/macintosh/therm_adt746x.c > +++ b/drivers/macintosh/therm_adt746x.c > @@ -3,9 +3,9 @@ > * > * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrensc= hmidt > * > - * Documentation from > - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.= pdf > - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_= b.pdf > + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_= b.pdf > + * http://www.onsemi.com/PowerSolutions/product.do?id=3DADT7467 > + * http://www.onsemi.com/PowerSolutions/product.do?id=3DADT7460 > * > */ > =20 > diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keyma= ps/rc-manli.c > index 1e9fbfa..0f590b3 100644 > --- a/drivers/media/IR/keymaps/rc-manli.c > +++ b/drivers/media/IR/keymaps/rc-manli.c > @@ -13,7 +13,6 @@ > #include > =20 > /* Michael Tokarev > - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg > keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at > least, and probably other cards too. > The "ascii-art picture" below (in comments, first row > diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/a= v7110.c > index a6be529..87279d9 100644 > --- a/drivers/media/dvb/ttpci/av7110.c > +++ b/drivers/media/dvb/ttpci/av7110.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > =20 > @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110) > /* Budgetpatch note: > * Original hardware design by Roberto Deza: > * There is a DVB_Wiki at > - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page > - * where is described this 'DVB TT Budget Patch', on Card Modding: > - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch > - * On the short description there is also a link to a external file, > - * with more details: > - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip > - * > + * http://www.linuxtv.org/ > * New software triggering design by Emard that works on > * original Roberto Deza's hardware: > * > diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpc= i/av7110_av.c > index 13efba9..878da6a 100644 > --- a/drivers/media/dvb/ttpci/av7110_av.c > +++ b/drivers/media/dvb/ttpci/av7110_av.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include > diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpc= i/av7110_ca.c > index 4eba35a..7564c26 100644 > --- a/drivers/media/dvb/ttpci/av7110_ca.c > +++ b/drivers/media/dvb/ttpci/av7110_ca.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include > diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpc= i/av7110_hw.c > index e162691..f1cbfe5 100644 > --- a/drivers/media/dvb/ttpci/av7110_hw.c > +++ b/drivers/media/dvb/ttpci/av7110_hw.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,= USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > /* for debugging ARM communication: */ > diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttp= ci/av7110_v4l.c > index 8986d96..ac20c5b 100644 > --- a/drivers/media/dvb/ttpci/av7110_v4l.c > +++ b/drivers/media/dvb/ttpci/av7110_v4l.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,= USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include > diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpc= i/budget-av.c > index 983672a..97afc01 100644 > --- a/drivers/media/dvb/ttpci/budget-av.c > +++ b/drivers/media/dvb/ttpci/budget-av.c > @@ -30,7 +30,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include "budget.h" > diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpc= i/budget-ci.c > index 13ac9e3..a9c2c32 100644 > --- a/drivers/media/dvb/ttpci/budget-ci.c > +++ b/drivers/media/dvb/ttpci/budget-ci.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include > diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/tt= pci/budget-core.c > index ba18e56..0546613 100644 > --- a/drivers/media/dvb/ttpci/budget-core.c > +++ b/drivers/media/dvb/ttpci/budget-core.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > =20 > diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/t= tpci/budget-patch.c > index 9c92f9d..5798355 100644 > --- a/drivers/media/dvb/ttpci/budget-patch.c > +++ b/drivers/media/dvb/ttpci/budget-patch.c > @@ -27,7 +27,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include "av7110.h" > diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/b= udget.c > index 874a10a..d238fb9 100644 > --- a/drivers/media/dvb/ttpci/budget.c > +++ b/drivers/media/dvb/ttpci/budget.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/=20 > */ > =20 > #include "budget.h" > diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/= radio-maxiradio.c > index 4349213..255d40d 100644 > --- a/drivers/media/radio/radio-maxiradio.c > +++ b/drivers/media/radio/radio-maxiradio.c > @@ -13,7 +13,7 @@ > * anybody does please mail me. > * > * For the pdf file see: > - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 > + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_= 3.pdf=20 > * > * > * CHANGES: > diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/ra= dio-typhoon.c > index 0343928..a5363ed 100644 > --- a/drivers/media/radio/radio-typhoon.c > +++ b/drivers/media/radio/radio-typhoon.c > @@ -1,8 +1,6 @@ > /* Typhoon Radio Card driver for radio support > * (c) 1999 Dr. Henrik Seidel > * > - * Card manufacturer: > - * http://194.18.155.92/idc/prod2.idc?nr=3D50753&lang=3De > * > * Notes on the hardware > * > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig > index f6e4d04..d000522 100644 > --- a/drivers/media/video/Kconfig > +++ b/drivers/media/video/Kconfig > @@ -978,7 +978,7 @@ config USB_STKWEBCAM > =09 Supported devices are typically found in some Asus laptops, > =09 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras > =09 may be supported by the stk11xx driver, from which this is > -=09 derived, see http://stk11xx.sourceforge.net > +=09 derived, see =20 > =20 > =09 To compile this driver as a module, choose M here: the > =09 module will be called stkwebcam. > diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_c= cic.c > index be35e69..9536f1a 100644 > --- a/drivers/media/video/cafe_ccic.c > +++ b/drivers/media/video/cafe_ccic.c > @@ -4,7 +4,7 @@ > * sensor. > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://www.marvell.com/products/pc_connectivity/88alp01/=20 > * > * Copyright 2006 One Laptop Per Child Association, Inc. > * Copyright 2006-7 Jonathan Corbet > diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/= cx18/cx18-cards.c > index 6b805af..fe10909 100644 > --- a/drivers/media/video/cx18/cx18-cards.c > +++ b/drivers/media/video/cx18/cx18-cards.c > @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std =3D { > =09.tv =3D { 0x61, 0x60, I2C_CLIENT_END }, > }; > =20 > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/=20 > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/vi= deo/cx23885/cx23885-417.c > index abd64e8..53a6782 100644 > --- a/drivers/media/video/cx23885/cx23885-417.c > +++ b/drivers/media/video/cx23885/cx23885-417.c > @@ -7,7 +7,7 @@ > * (c) 2008 Steven Toth > * - CX23885/7/8 support > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/vi= deo/cx88/cx88-blackbird.c > index e46e1ce..660b2a9 100644 > --- a/drivers/media/video/cx88/cx88-blackbird.c > +++ b/drivers/media/video/cx88/cx88-blackbird.c > @@ -9,7 +9,7 @@ > * (c) 2005-2006 Mauro Carvalho Chehab > * - video_ioctl2 conversion > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/= ivtv/ivtv-cards.c > index ca1fd32..87afbbe 100644 > --- a/drivers/media/video/ivtv/ivtv-cards.c > +++ b/drivers/media/video/ivtv/ivtv-cards.c > @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 =3D = { > =20 > /********************** card configuration *****************************= **/ > =20 > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/=20 > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c > index ef0c817..b1dbcf1 100644 > --- a/drivers/media/video/mxb.c > +++ b/drivers/media/video/mxb.c > @@ -3,7 +3,7 @@ > =20 > Copyright (C) 1998-2006 Michael Hunold > =20 > - Visit http://www.mihu.de/linux/saa7146/mxb/ > + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html=20 > for further details about this card. > =20 > This program is free software; you can redistribute it and/or modify > diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/me= dia/video/sn9c102/sn9c102_pas202bcb.c > index 2782f94..2e86fdc 100644 > --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > @@ -4,7 +4,6 @@ > * = * > * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio = * > * = * > - * http://cadu.homelinux.com:8080/ = * > * = * > * Support for SN9C103, DAC Magnitude, exposure and green gain controls = * > * added by Luca Risolia = * > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index b743312..3b28933 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -112,8 +112,8 @@ config IBM_ASM > =20 > =09 WARNING: This software may not be supported or function > =09 correctly on your IBM server. Please consult the IBM ServerProven > -=09 website for > -=09 information on the specific driver level and support statement > +=09 website > +=09 for information on the specific driver level and support statement > =09 for your IBM server. > =20 > config PHANTOM > diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_= cmdset_0002.c > index 3e6c47b..ba29d2f 100644 > --- a/drivers/mtd/chips/cfi_cmdset_0002.c > +++ b/drivers/mtd/chips/cfi_cmdset_0002.c > @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map= , int primary) > =20 > =09=09=09/* > =09=09=09 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.= 4 > -=09=09=09 * see: http://www.amd.com/us-en/assets/content_type/Downloadab= leAssets/cfi_r20.pdf, page 19 > -=09=09=09 * http://www.amd.com/us-en/assets/content_type/Downloadab= leAssets/cfi_100_20011201.pdf > +=09=09=09 * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, = page 19=20 > +=09=09=09 * http://www.spansion.com/Support/AppNotes/cfi_100_200112= 01.pdf > =09=09=09 * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a= 12_e.pdf > =09=09=09 */ > =09=09=09if (extp->MajorVersion !=3D '1' || > diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c > index f4359fe..caf6041 100644 > --- a/drivers/mtd/devices/lart.c > +++ b/drivers/mtd/devices/lart.c > @@ -17,7 +17,7 @@ > * - January 2000 > * > * [2] MTD internal API documentation > - * - http://www.linux-mtd.infradead.org/tech/ > + * - http://www.linux-mtd.infradead.org/=20 > * > * Limitations: > * > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c > index 4d6a64c..037b399 100644 > --- a/drivers/mtd/ftl.c > +++ b/drivers/mtd/ftl.c > @@ -51,7 +51,7 @@ > =20 > Use of the FTL format for non-PCMCIA applications may be an > infringement of these patents. For additional information, > - contact M-Systems (http://www.m-sys.com) directly. > + contact M-Systems directly. M-Systems since acquired by Sandisk.=20 > =20 > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D*/ > #include > diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig > index 701d942..9622126 100644 > --- a/drivers/mtd/maps/Kconfig > +++ b/drivers/mtd/maps/Kconfig > @@ -172,7 +172,7 @@ config MTD_OCTAGON > =09 This provides a 'mapping' driver which supports the way in which > =09 the flash chips are connected in the Octagon-5066 Single Board > =09 Computer. More information on the board is available at > -=09 . > +=09 . > =20 > config MTD_VMAX > =09tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" > @@ -284,7 +284,7 @@ config MTD_TQM8XXL > =09 chips, currently uses AMD one. This 'mapping' driver supports > =09 that arrangement, allowing the CFI probe and command set driver > =09 code to communicate with the chips on the TQM8xxL board. More at > -=09 . > +=09 . > =20 > config MTD_RPXLITE > =09tristate "CFI Flash device mapped on RPX Lite or CLLF" > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c > index db1dfc5..e06c898 100644 > --- a/drivers/mtd/nand/cafe_nand.c > +++ b/drivers/mtd/nand/cafe_nand.c > @@ -2,7 +2,7 @@ > * Driver for One Laptop Per Child =E2=80=98CAF=C3=89=E2=80=99 controlle= r, aka Marvell 88ALP01 > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://wiki.laptop.org/go/Datasheets=20 > * > * Copyright =C2=A9 2006 Red Hat, Inc. > * Copyright =C2=A9 2006 David Woodhouse > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 2cc81a5..5b66842 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -921,7 +921,7 @@ config SMC91X > =09 including the SMC91C94 and the SMC91C111. Say Y if you want it > =09 compiled into the kernel, and read the file > =09 and the Ethernet-HOWTO, > -=09 available from . > +=09 available from . > =20 > =09 This driver is also available as a module ( =3D code which can be > =09 inserted in and removed from the running kernel whenever you want). > @@ -1031,7 +1031,7 @@ config SMC911X > =09 including the new LAN9115, LAN9116, LAN9117, and LAN9118. > =09 Say Y if you want it compiled into the kernel,=20 > =09 and read the Ethernet-HOWTO, available from > -=09 . > +=09 . > =20 > =09 This driver is also available as a module. The module will be=20 > =09 called smc911x. If you want to compile it as a module, say M=20 > @@ -1513,7 +1513,7 @@ config E100 > =20 > =09 For the latest Intel PRO/100 network driver for Linux, see: > =20 > -=09 > +=09 > =20 > =09 More specific information on configuring the driver is in=20 > =09 . > @@ -1539,9 +1539,8 @@ config FEALNX > =09select CRC32 > =09select MII > =09help > -=09 Say Y here to support the Mysom MTD-800 family of PCI-based Etherne= t > -=09 cards. Specifications and data at > -=09 . > +=09 Say Y here to support the Myson MTD-800 family of PCI-based Etherne= t=20 > +=09 cards. > =20 > config NATSEMI > =09tristate "National Semiconductor DP8381x series PCI Ethernet support" > @@ -1715,7 +1714,7 @@ config SMSC9420 > =09 This is a driver for SMSC's LAN9420 PCI ethernet adapter. > =09 Say Y if you want it compiled into the kernel, > =09 and read the Ethernet-HOWTO, available from > -=09 . > +=09 . > =20 > =09 This driver is also available as a module. The module will be > =09 called smsc9420. If you want to compile it as a module, say M > @@ -2550,7 +2549,7 @@ config CHELSIO_T1 > our website at . > =20 > For customer support, please visit our customer support page a= t > - . > + . > =20 > Please send feedback to . > =20 > @@ -2582,7 +2581,7 @@ config CHELSIO_T3 > =09 our website at . > =20 > =09 For customer support, please visit our customer support page at > -=09 . > +=09 . > =20 > =09 Please send feedback to . > =20 > @@ -2607,7 +2606,7 @@ config CHELSIO_T4 > =09 our website at . > =20 > =09 For customer support, please visit our customer support page at > -=09 . > +=09 . > =20 > =09 Please send feedback to . > =20 > @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF > =09 our website at . > =20 > =09 For customer support, please visit our customer support page at > -=09 . > +=09 . > =20 > =09 Please send feedback to . > =20 > diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfi= g > index 0a0e0cd..f5a8916 100644 > --- a/drivers/net/appletalk/Kconfig > +++ b/drivers/net/appletalk/Kconfig > @@ -18,7 +18,7 @@ config ATALK > =20 > =09 General information about how to connect Linux, Windows machines an= d > =09 Macs is on the WWW at . Th= e > -=09 NET-3-HOWTO, available from > +=09 NET3-4-HOWTO, available from > =09 , contains valuable > =09 information as well. > =20 > diff --git a/drivers/net/atp.c b/drivers/net/atp.c > index bd2f9d3..0eee044 100644 > --- a/drivers/net/atp.c > +++ b/drivers/net/atp.c > @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; =09=09=09/* The data transf= er mode. */ > =20 > =09In 1997 Realtek made available the documentation for the second gener= ation > =09RTL8012 chip, which has lead to several driver improvements. > -=09 http://www.realtek.com.tw/cn/cn.html > +=09 http://www.realtek.com.tw/ > =20 > =09=09=09=09=09Theory of Operation > =20 > diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c > index 57c8ac0..c6e2571 100644 > --- a/drivers/net/epic100.c > +++ b/drivers/net/epic100.c > @@ -131,8 +131,8 @@ IIIa. Ring buffers > =20 > IVb. References > =20 > -http://www.smsc.com/main/tools/discontinued/83c171.pdf > -http://www.smsc.com/main/tools/discontinued/83c175.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf > http://scyld.com/expert/NWay.html > http://www.national.com/pf/DP/DP83840A.html > =20 > diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig > index 62d5d5c..95dbcfd 100644 > --- a/drivers/net/hamradio/Kconfig > +++ b/drivers/net/hamradio/Kconfig > @@ -73,7 +73,7 @@ config DMASCC > =09 certain parameters, such as channel access timing, clock mode, and > =09 DMA channel. This is accomplished with a small utility program, > =09 dmascc_cfg, available at > -=09 . Please be sure t= o > +=09 . Please be sure to > =09 get at least version 1.27 of dmascc_cfg, as older versions will not > =09 work with the current driver. > =20 > diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c > index 294ccfb..8de3273 100644 > --- a/drivers/net/ibmlana.c > +++ b/drivers/net/ibmlana.c > @@ -23,7 +23,7 @@ paper sources: > 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release = 1.0 > Document Number SC30-3661-00' by IBM for info on the adapter itself > =20 > - Also see http://www.natsemi.com/ > + Also see http://www.national.com/analog=20 > =20 > special acknowledgements to: > - Bob Eager for helping me out with documentation from IBM > diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h > index 36c3060..4dc39e5 100644 > --- a/drivers/net/irda/donauboe.h > +++ b/drivers/net/irda/donauboe.h > @@ -54,7 +54,7 @@ > /* anyone who has. HOWEVER the chip bears a striking resemblence */ > /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ > /* the documentation for this is freely available at */ > -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ > +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ > /* The mapping between the registers in that document and the */ > /* Registers in the 701 oboe chip are as follows */ > =20 > diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c > index 56f3fc4..627b619 100644 > --- a/drivers/net/pci-skeleton.c > +++ b/drivers/net/pci-skeleton.c > @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an ali= gnment buffer. > =20 > IVb. References > =20 > -http://www.realtek.com.tw/cn/cn.html > +http://www.realtek.com.tw/ > http://www.scyld.com/expert/NWay.html > =20 > IVc. Errata > diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.= c > index c683f77..e092679 100644 > --- a/drivers/net/pcmcia/3c574_cs.c > +++ b/drivers/net/pcmcia/3c574_cs.c > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. > V. References > =20 > http://www.scyld.com/expert/NWay.html > -http://www.national.com/pf/DP/DP83840.html > +http://www.national.com/opf/DP/DP83840A.html > =20 > Thanks to Terry Murphy of 3Com for providing development information for > earlier 3Com products. > diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c > index 8c4067a..12fb560 100644 > --- a/drivers/net/sc92031.c > +++ b/drivers/net/sc92031.c > @@ -15,7 +15,7 @@ > * Rewritten for 2.6 by Cesar Eduardo Barros > * > * A datasheet for this chip can be found at > - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf > + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf=20 > */ > =20 > /* Note about set_mac_address: I don't know how to change the hardware > diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c > index ccee3ed..ef000b2 100644 > --- a/drivers/net/tlan.c > +++ b/drivers/net/tlan.c > @@ -78,7 +78,7 @@ > * =09=09=09 - Updated tlan.txt accordingly. > * =09=09=09 - Adjusted minimum/maximum frame length. > * =09=09=09 - There is now a TLAN website up at > - * =09=09=09 http://tlan.kernel.dk > + * =09=09=09 http://hp.sourceforge.net/=20 > * > * =09v1.7 April 07, 2000 - Started to implement custom ioctls. Driver = now > * =09=09=09 reports PHY information when used with Donald > diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms= 380tr.c > index 435ef7d..ccc16d6 100644 > --- a/drivers/net/tokenring/tms380tr.c > +++ b/drivers/net/tokenring/tms380tr.c > @@ -5,7 +5,7 @@ > * Originally sktr.c: Written 1997 by Christoph Goos > * > * A fine result of the Linux Systems Network Architecture Project. > - * http://www.linux-sna.org > + * http://www.vanheusden.com/sna/=20 > * > * This software may be used and distributed according to the terms > * of the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig > index 516713f..14c02e1 100644 > --- a/drivers/net/tulip/Kconfig > +++ b/drivers/net/tulip/Kconfig > @@ -151,7 +151,7 @@ config ULI526X > =09select CRC32 > =09---help--- > =09 This driver is for ULi M5261/M5263 10/100M Ethernet Controller > -=09 (). > +=09 (). > =20 > =09 To compile this driver as a module, choose M here. The module will > =09 be called uli526x. > diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c > index 08555f8..08ad269 100644 > --- a/drivers/net/usb/plusb.c > +++ b/drivers/net/usb/plusb.c > @@ -32,7 +32,7 @@ > =20 > =20 > /* > - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com > + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/=20 > * > * The protocol and handshaking used here should be bug-compatible > * with the Linux 2.2 "plusb" driver, by Deti Fliegl. > diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig > index d08ce6a..423eb26 100644 > --- a/drivers/net/wan/Kconfig > +++ b/drivers/net/wan/Kconfig > @@ -409,7 +409,7 @@ config CYCLADES_SYNC > =09tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" > =09depends on WAN_ROUTER_DRIVERS && (PCI || ISA) > =09---help--- > -=09 Cyclom 2X from Cyclades Corporation is a= n > +=09 Cyclom 2X from Cyclades Corporation is an > =09 intelligent multiprotocol WAN adapter with data transfer rates up t= o > =09 512 Kbps. These cards support the X.25 and SNA related protocols. > =20 > diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireles= s/ath/ath5k/ath5k.h > index ea6362a..97659a0 100644 > --- a/drivers/net/wireless/ath/ath5k/ath5k.h > +++ b/drivers/net/wireless/ath/ath5k/ath5k.h > @@ -351,7 +351,7 @@ struct ath5k_srev_name { > /* > * Some of this information is based on Documentation from: > * > - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG > + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG=20 > * > * Modulation for Atheros' eXtended Range - range enhancing extension th= at is > * supposed to double the distance an Atheros client device can keep a > diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/= ath/ath5k/reg.h > index 55b4ac6..69a9b34 100644 > --- a/drivers/net/wireless/ath/ath5k/reg.h > +++ b/drivers/net/wireless/ath/ath5k/reg.h > @@ -26,7 +26,6 @@ > * Atheros presentations and papers like these: > * > * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf > - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf > * > * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf > * > diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/= Kconfig > index b0342a5..8e82379 100644 > --- a/drivers/net/wireless/p54/Kconfig > +++ b/drivers/net/wireless/p54/Kconfig > @@ -8,7 +8,7 @@ config P54_COMMON > =09 also need to be enabled in order to support any devices. > =20 > =09 These devices require softmac firmware which can be found at > -=09 http://prism54.org/ > +=09 > =20 > =09 If you choose to build a module, it'll be called p54common. > =20 > @@ -20,7 +20,7 @@ config P54_USB > =09 This driver is for USB isl38xx based wireless cards. > =20 > =09 These devices require softmac firmware which can be found at > -=09 http://prism54.org/ > +=09 > =20 > =09 If you choose to build a module, it'll be called p54usb. > =20 > @@ -34,7 +34,7 @@ config P54_PCI > =09 supported by the fullmac driver/firmware. > =20 > =09 This driver requires softmac firmware which can be found at > -=09 http://prism54.org/ > +=09 > =20 > =09 If you choose to build a module, it'll be called p54pci. > =20 > diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/= wireless/prism54/islpci_hotplug.c > index dc14420..b5e64d7 100644 > --- a/drivers/net/wireless/prism54/islpci_hotplug.c > +++ b/drivers/net/wireless/prism54/islpci_hotplug.c > @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); > /* In this order: vendor, device, subvendor, subdevice, class, class_mas= k, > * driver_data > * If you have an update for this please contact prism54-devel@prism54.o= rg > - * The latest list can be found at http://prism54.org/supported_cards.ph= p */ > + * The latest list can be found at http://wireless.kernel.org/en/users/D= rivers/p54 */ > static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) =3D { > =09/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ > =09{ > diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino > index 097324f..1627426 100644 > --- a/drivers/parisc/README.dino > +++ b/drivers/parisc/README.dino > @@ -10,8 +10,7 @@ > ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are > ** not affected." > ** > -** REVISIT: "go/pci_defect" link below is stale. > -**=09HP Internal can use > +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=3Den= _US&prodTypeId=3D12454&prodSeriesId=3D44443 > ** > **=09Product=09=09First Good Serial Number > ** C200/C240 (US)=09US67350000 > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 89ed181..dcc333f 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, =09PCI_D= EVICE_ID_INTEL_82439TX, =09quir > *=09VIA Apollo KT133 needs PCI latency patch > *=09Made according to a windows driver based patch by George E. Breese > *=09see PCI Latency Adjust on http://www.viahardware.com/download/viatw= eak.shtm > + *=09and http://www.georgebreese.com/net/software/#PCI > * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for > * the info on which Mr Breese based his work. > * > @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,=090x6= 05,=09quirk_transparent_bridge) > /* > * Common misconfiguration of the MediaGX/Geode PCI master that will > * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 > - * datasheets found at http://www.national.com/ds/GX for info on what > + * datasheets found at http://www.national.com/analog for info on what > * these bits do. > */ > static void quirk_mediagx_master(struct pci_dev *dev) > diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.= c > index 414d9a6..91a7225 100644 > --- a/drivers/pcmcia/yenta_socket.c > +++ b/drivers/pcmcia/yenta_socket.c > @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *= socket) > * invisible during PCI scans because of a misconfigured subordinate num= ber > * of the parent brige - some BIOSes seem to be too lazy to set it right= =2E > * Does the fixup carefully by checking how far it can go without confli= cts. > - * See http\://bugzilla.kernel.org/show_bug.cgi?id=3D2944 for more infor= mation. > + * See http://bugzilla.kernel.org/show_bug.cgi?id=3D2944 for more inform= ation. > */ > static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) > { > diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c > index 2d8ac43..bc89f39 100644 > --- a/drivers/pnp/pnpbios/proc.c > +++ b/drivers/pnp/pnpbios/proc.c > @@ -11,7 +11,6 @@ > * > * The .../escd file is utilized by the lsescd utility written by > * Gunther Mayer. > - * http://home.t-online.de/home/gunther.mayer/lsescd > * > * The .../legacy_device_resources file is not used yet. > * > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index bbf91ae..03453d4 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -116,7 +116,7 @@ config CHR_DEV_OSST > =09 and > =09 in the kernel source. > =09 More info on the OnStream driver may be found on > -=09 > +=09 > =09 Please also have a look at the standard st docu, as most of it > =09 applies to osst as well. > =20 > @@ -156,9 +156,9 @@ config CHR_DEV_SG > =09 directly, so you need some additional software which knows how to > =09 talk to these devices using the SCSI protocol: > =20 > -=09 For scanners, look at SANE (). For CD > +=09 For scanners, look at SANE (). For CD > =09 writer software look at Cdrtools > -=09 () > +=09 () > =09 and for burning a "disk at once": CDRDAO > =09 (). Cdparanoia is a high > =09 quality digital reader of audio CDs (). > @@ -950,6 +950,7 @@ config SCSI_IPS > =09---help--- > =09 This is support for the IBM ServeRAID hardware RAID controllers. > =09 See > +=09 and > =09 for more information. If this driver does not work correctly > =09 without modification please contact the author by email at > =09 . > @@ -1609,7 +1610,7 @@ config SCSI_DEBUG > =09 host adapter with one dummy SCSI disk. Each dummy disk uses kernel > =09 RAM as storage (i.e. it is a ramdisk). To save space when multiple > =09 dummy disks are simulated, they share the same kernel RAM for=20 > -=09 their storage. See for more > +=09 their storage. See for more > =09 information. This driver is primarily of use to those testing the > =09 SCSI and block subsystems. If unsure, say N. > =20 > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c > index 24110f6..131c95f 100644 > --- a/drivers/serial/8250.c > +++ b/drivers/serial/8250.c > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) > =09/* > =09 * Exar ST16C2550 "A2" devices incorrectly detect as > =09 * having an EFR, and report an ID of 0x0201. See > -=09 * http://www.exar.com/info.php?pdf=3Ddan180_oct2004.pdf > +=09 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html= =20 > =09 */ > =09if (autoconfig_read_divisor_id(up) =3D=3D 0x0201 && size_fifo(up) =3D= =3D 16) > =09=09return 1; > diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport= _uart.c > index 5318dd3..feb62a8 100644 > --- a/drivers/serial/bfin_sport_uart.c > +++ b/drivers/serial/bfin_sport_uart.c > @@ -10,7 +10,7 @@ > =20 > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.= pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.p= df=20 > * This application note describe how to implement a UART on a Sharc DSP= , > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport= _uart.h > index 9ce253e..6d06ce1 100644 > --- a/drivers/serial/bfin_sport_uart.h > +++ b/drivers/serial/bfin_sport_uart.h > @@ -10,7 +10,7 @@ > =20 > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.= pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.p= df=20 > * This application note describe how to implement a UART on a Sharc DSP= , > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c > index 9b03d7b..3fa2e16 100644 > --- a/drivers/serial/uartlite.c > +++ b/drivers/serial/uartlite.c > @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); > * Register definitions > * > * For register details see datasheet: > - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf > + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uart= lite.pdf=20 > */ > =20 > #define ULITE_RX=09=090x00 > diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled= /README > index 96b9717..0d82a6d 100644 > --- a/drivers/staging/asus_oled/README > +++ b/drivers/staging/asus_oled/README > @@ -2,7 +2,7 @@ > Driver for Asus OLED display present in some Asus laptops. > =20 > The code of this driver is based on 'asusoled' program taken from > - https://launchpad.net/asusoled/. I just wanted to have a simple > + . I just wanted to have a s= imple > kernel driver for controlling this device, but I didn't know how > to do that. Now I know ;) Also, that program can not be used > with usbhid loaded, which means no USB mouse/keyboard while > diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus= _oled/asus_oled.c > index 5b279fb..8c95d8c 100644 > --- a/drivers/staging/asus_oled/asus_oled.c > +++ b/drivers/staging/asus_oled/asus_oled.c > @@ -24,7 +24,7 @@ > * > * > * Asus OLED support is based on asusoled program taken from > - * https://launchpad.net/asusoled/. > + * . > * > * > */ > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/stagin= g/comedi/drivers/cb_pcimdas.c > index ced346a..78b1410 100644 > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c > @@ -37,7 +37,7 @@ Configuration Options: > Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org)= =2E > Only supports DIO, AO and simple AI in it's present form. > No interrupts, multi channel or FIFO AI, although the card looks like it= could support this. > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf f= or more details. > +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more deta= ils. > */ > =20 > #include "../comedidev.h" > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/stag= ing/comedi/drivers/daqboard2000.c > index 6af6c83..82be77d 100644 > --- a/drivers/staging/comedi/drivers/daqboard2000.c > +++ b/drivers/staging/comedi/drivers/daqboard2000.c > @@ -50,8 +50,8 @@ Configuration options: > With some help from our swedish distributor, we got the Windows sourc= ecode > for the card, and here are the findings so far. > =20 > - 1. A good document that describes the PCI interface chip is found at: > - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf > + 1. A good document that describes the PCI interface chip is 9080db-10= 6.pdf > + available from http://www.plxtech.com/products/io/pci9080=20 > =20 > 2. The initialization done so far is: > a. program the FPGA (windows code sans a lot of error messages) > diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/= comedi/drivers/ni_labpc.c > index 3acf7e6..1411dd8 100644 > --- a/drivers/staging/comedi/drivers/ni_labpc.c > +++ b/drivers/staging/comedi/drivers/ni_labpc.c > @@ -37,7 +37,7 @@ boards has not > yet been added to the driver, mainly due to the fact that > I don't know the device id numbers. If you have one > of these boards, > -please file a bug report at https://bugs.comedi.org/ > +please file a bug report at http://comedi.org/=20 > so I can get the necessary information from you. > =20 > The 1200 series boards have onboard calibration dacs for correcting > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/sta= ging/comedi/drivers/ni_mio_common.c > index bd16f91..986ef67 100644 > --- a/drivers/staging/comedi/drivers/ni_mio_common.c > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c > @@ -34,7 +34,7 @@ > =09 340747b.pdf AT-MIO E series Register Level Programmer Manual > =09 341079b.pdf PCI E Series RLPM > =09 340934b.pdf DAQ-STC reference manual > -=0967xx and 611x registers (from http://www.ni.com/pdf/daq/us) > +=0967xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/docu= mentation/) > =09release_ni611x.pdf > =09release_ni67xx.pdf > =09Other possibly relevant info: > diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/c= omedi/drivers/plx9080.h > index 485d63f..0d254a1 100644 > --- a/drivers/staging/comedi/drivers/plx9080.h > +++ b/drivers/staging/comedi/drivers/plx9080.h > @@ -13,7 +13,7 @@ > * > ******************************************************************** > * > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ > + * Copyright (C) 1999 RG Studio s.c. > * Written by Krzysztof Halasa > * > * Portions (C) SBE Inc., used by permission. > diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/co= medi/drivers/rtd520.c > index 0367d2b..a49a7c5 100644 > --- a/drivers/staging/comedi/drivers/rtd520.c > +++ b/drivers/staging/comedi/drivers/rtd520.c > @@ -59,7 +59,7 @@ Configuration options: > Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf > Example source: http://www.rtdusa.com/examples/dm/dm7520.zip > Call them and ask for the register level manual. > - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm > + PCI chip: http://www.plxtech.com/products/io/pci9080=20 > =20 > Notes: > This board is memory mapped. There is some IO stuff, but it isn't n= eeded. > diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/qu= ickstart/quickstart.c > index 6612247..ba8f670 100644 > --- a/drivers/staging/quickstart/quickstart.c > +++ b/drivers/staging/quickstart/quickstart.c > @@ -5,8 +5,7 @@ > * Copyright (C) 2007-2010 Angelo Arrifano > * > * Information gathered from disassebled dsdt and from here: > - * "http://download.microsoft.com/download/9/c/5/ > - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" > + * =20 > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig > index 1da73ec..bb44079 100644 > --- a/drivers/uio/Kconfig > +++ b/drivers/uio/Kconfig > @@ -17,9 +17,9 @@ config UIO_CIF > =09depends on PCI > =09help > =09 Driver for Hilscher CIF DeviceNet and Profibus cards. This > -=09 driver requires a userspace component that handles all of the > -=09 heavy lifting and can be found at: > -=09 =09http://www.osadl.org/projects/downloads/UIO/user/cif-* > + =09 driver requires a userspace component called cif that handles > +=09 all of the heavy lifting and can be found at: > +=09 > =20 > =09 To compile this driver as a module, choose M here: the module > =09 will be called uio_cif. > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig > index 916b2b6..b71e309 100644 > --- a/drivers/usb/serial/Kconfig > +++ b/drivers/usb/serial/Kconfig > @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR > =09help > =09 Say Y here if you want to connect to your HandSpring Visor, Palm > =09 m500 or m505 through its USB docking station. See > -=09 for more information on using th= is > +=09 for more information o= n using this > =09 driver. > =20 > =09 To compile this driver as a module, choose M here: the > @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN > =09 and was developed with their support. You must also include > =09 firmware to support your particular device(s). > =20 > -=09 See for more information. > +=09 See for more information. > =20 > =09 To compile this driver as a module, choose M here: the > =09 module will be called keyspan. > diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_= sio_ids.h > index 15a4583..28c640d 100644 > --- a/drivers/usb/serial/ftdi_sio_ids.h > +++ b/drivers/usb/serial/ftdi_sio_ids.h > @@ -46,7 +46,7 @@ > #define FTDI_USINT_RS232_PID=090xb812=09/* Navigator RS232 and CONFIG li= nes */ > =20 > /* OOCDlink by Joern Kaipf > - * (http://www.joernonline.de/dw/doku.php?id=3Dstart&idx=3Dprojects:oocd= link) */ > + * (http://www.joernonline.de/) */ > #define FTDI_OOCDLINK_PID=090xbaf8=09/* Amontec JTAGkey */ > =20 > /* Luminary Micro Stellaris Boards, VID =3D FTDI_VID */ > @@ -335,7 +335,7 @@ > #define FTDI_PIEGROUP_PID=090xF208=09/* Product Id */ > =20 > /* ACT Solutions HomePro ZWave interface > - (http://www.act-solutions.com/HomePro.htm) */ > + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ > #define FTDI_ACTZWAVE_PID=090xF2D0 > =20 > /* > @@ -366,7 +366,7 @@ > #define FTDI_SUUNTO_SPORTS_PID=090xF680=09/* Suunto Sports instrument */ > =20 > /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chi= p */ > -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ > +/* http://www.usbuirt.com/ */ > #define FTDI_USB_UIRT_PID=090xF850=09/* Product Id */ > =20 > /* CCS Inc. ICDU/ICDU40 product ID - > @@ -395,7 +395,7 @@ > */ > #define FTDI_HE_TIRA1_PID=090xFA78=09/* Tira-1 IR transceiver */ > =20 > -/* Inside Accesso contactless reader (http://www.insidefr.com) */ > +/* Inside Accesso contactless reader (http://www.insidecontactless.com/)= */ > #define INSIDE_ACCESSO=09=090xFAD0 > =20 > /* > @@ -634,14 +634,14 @@ > =20 > /* > * JETI SPECTROMETER SPECBOS 1201 > - * http://www.jeti.com/products/sys/scb/scb1201.php > + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specb= os-2101 > */ > #define JETI_VID=09=090x0c6c > #define JETI_SPC1201_PID=090x04b2 > =20 > /* > * FTDI USB UART chips used in construction projects from the > - * Elektor Electronics magazine (http://elektor-electronics.co.uk) > + * Elektor Electronics magazine (http://www.elektor.com/) > */ > #define ELEKTOR_VID=09=090x0C7D > #define ELEKTOR_FT323R_PID=090x0005=09/* RFID-Reader, issue 09-2006 */ > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c > index 297163c..0791778 100644 > --- a/drivers/usb/serial/keyspan.c > +++ b/drivers/usb/serial/keyspan.c > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > =20 > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > =20 > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h > index bf3297d..2d8baf6 100644 > --- a/drivers/usb/serial/keyspan.h > +++ b/drivers/usb/serial/keyspan.h > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > =20 > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > =20 > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.= h > index 3a3f5e6..d325bb8 100644 > --- a/drivers/usb/serial/mct_u232.h > +++ b/drivers/usb/serial/mct_u232.h > @@ -10,10 +10,9 @@ > * > * This driver is for the device MCT USB-RS232 Converter (25 pin, Model = No. > * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further > - * information. The properties of this device are listed at the end of t= his > - * file. This device is available from various distributors. I know Hana= , > - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs= 25. > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.= html=20 > + * for further information. The properties of this device are listed at = the end=20 > + * of this file. This device was used in the Dlink DSB-S25. > * > * All of the information about the device was acquired by using SniffUS= B > * on Windows98. The technical details of the reverse engineering are > @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_se= rial *serial, > * embedded UART. Exhaustive documentation for these is available at: > * > * http://www.semiconductors.philips.com/pip/p87c52ubaa > - * http://www.semiconductors.philips.com/pip/pdiusbd12 > + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_G= UIDE.pdf > * > * Thanks to Julian Highfield for the pointer to the Philips database. > * > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig > index 8a372ba..b356e15 100644 > --- a/drivers/usb/storage/Kconfig > +++ b/drivers/usb/storage/Kconfig > @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB > =09depends on USB_STORAGE > =09help > =09 Support for certain Datafab CompactFlash readers. > -=09 Datafab has a web page at . > +=09 Datafab has a web page at . > =20 > =09 If this driver is compiled as a module, it will be named ums-datafa= b. > =20 > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 8b31fdf..dc06ff1 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -49,7 +49,7 @@ menuconfig FB > =09 You need an utility program called fbset to make full use of frame > =09 buffer devices. Please read > =09 and the Framebuffer-HOWTO at > -=09 f= or more > +=09 f= or more > =09 information. > =20 > =09 Say Y here and to the driver for your graphics board below if you > @@ -955,7 +955,7 @@ config FB_EPSON1355 > =09 Build in support for the SED1355 Epson Research Embedded RAMDAC > =09 LCD/CRT Controller (since redesignated as the S1D13505) as a > =09 framebuffer. Product specs at > -=09 . > +=09 . > =20 > config FB_S1D13XXX > =09tristate "Epson S1D13XXX framebuffer support" > @@ -966,7 +966,7 @@ config FB_S1D13XXX > =09help > =09 Support for S1D13XXX framebuffer device family (currently only > =09 working with S1D13806). Product specs at > -=09 > +=09 > =20 > config FB_ATMEL > =09tristate "AT91/AT32 LCD Controller support" > @@ -1323,7 +1323,7 @@ config FB_RADEON > =09 don't need to choose this to run the Radeon in plain VGA mode. > =20 > =09 There is a product page at > -=09 http://apps.ati.com/ATIcompare/ > +=09 http://products.amd.com/en-us/GraphicCardResult.aspx > =20 > config FB_RADEON_I2C > =09bool "DDC/I2C for ATI Radeon support" > @@ -1395,7 +1395,7 @@ config FB_ATY_CT > =09 Say Y here to support use of ATI's 64-bit Rage boards (or other > =09 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a > =09 framebuffer device. The ATI product support page for these boards > -=09 is at . > +=09 is at . > =20 > config FB_ATY_GENERIC_LCD > =09bool "Mach64 generic LCD support (EXPERIMENTAL)" > diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c > index f3d7440..3ec4923 100644 > --- a/drivers/video/arcfb.c > +++ b/drivers/video/arcfb.c > @@ -2,7 +2,6 @@ > * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board > * > * Copyright (C) 2005, Jaya Kumar > - * http://www.intworks.biz/arclcd > * > * This file is subject to the terms and conditions of the GNU General P= ublic > * License. See the file COPYING in the main directory of this archive f= or > diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c > index db9713b..a268cbf 100644 > --- a/drivers/video/epson1355fb.c > +++ b/drivers/video/epson1355fb.c > @@ -4,7 +4,7 @@ > * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller > * (previously known as SED1355) > * > - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html > + * Cf. http://vdc.epson.com/ > * > * > * Copyright (C) Hewlett-Packard Company. All rights reserved. > diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c > index 7293eac..7cb715d 100644 > --- a/drivers/video/fbcvt.c > +++ b/drivers/video/fbcvt.c > @@ -5,7 +5,7 @@ > * > * Based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * This file is subject to the terms and conditions of the GNU General P= ublic > * License. See the file COPYING in the main directory of this archive > diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c > index c77bcc6..e225c00 100644 > --- a/drivers/video/hecubafb.c > +++ b/drivers/video/hecubafb.c > @@ -10,7 +10,7 @@ > * > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoev= en. > * This work was possible because of apollo display code from E-Ink's we= bsite > - * http://support.eink.com/community > + * http://eink.com/ > * All information used to write this code is from public material made > * available by E-Ink on its support site. Some commands such as 0xA4 > * were found by looping through cmd=3D0x00 thru 0xFF and supplying rand= om > diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c > index 9b3d6e4..63ed3b7 100644 > --- a/drivers/video/metronomefb.c > +++ b/drivers/video/metronomefb.c > @@ -10,7 +10,7 @@ > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoev= en. > * > * This work was made possible by help and equipment support from E-Ink > - * Corporation. http://support.eink.com/community > + * Corporation. http://www.eink.com/ > * > * This driver is written to be used with the Metronome display controll= er. > * It is intended to be architecture independent. A board specific drive= r > diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/ke= yspan_pda.S > index 418fe69..f3acc19 100644 > --- a/firmware/keyspan_pda/keyspan_pda.S > +++ b/firmware/keyspan_pda/keyspan_pda.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver = code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: > + * EzUSB Technical Reference Manual: > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB = is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO= ports > * use totally different registers! > diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xir= com_pgs.S > index 05d99dd..0b79bbf 100644 > --- a/firmware/keyspan_pda/xircom_pgs.S > +++ b/firmware/keyspan_pda/xircom_pgs.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver = code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: > + * EzUSB Technical Reference Manual: > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB = is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO= ports > * use totally different registers! > diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h > index 6bbd75c..7c232c1 100644 > --- a/fs/hostfs/hostfs.h > +++ b/fs/hostfs/hostfs.h > @@ -28,12 +28,7 @@ > * #define ATTR_KILL_SUID=092048 > * #define ATTR_KILL_SGID=094096 > * > - * and this is because they were added in 2.5 development in this patch: > - * > - * http://linux.bkbits.net:8080/linux-2.5/ > - * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=3Dindex.html > - * |src/.|src/include|src/include/linux|related/include/linux/fs.h > - * > + * and this is because they were added in 2.5 development. > * Actually, they are not needed by most ->setattr() methods - they are = set by > * callers of notify_change() to notify that the setuid/setgid bits must= be > * dropped. > diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c > index 5bf8a04..789c625 100644 > --- a/fs/partitions/ldm.c > +++ b/fs/partitions/ldm.c > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/= 19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id= =3Ddownloads=20 > * > * This program is free software; you can redistribute it and/or modify = it under > * the terms of the GNU General Public License as published by the Free = Software > diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h > index d1fb50b..374242c 100644 > --- a/fs/partitions/ldm.h > +++ b/fs/partitions/ldm.h > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/= 19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id= =3Ddownloads=20 > * > * This program is free software; you can redistribute it and/or modify = it > * under the terms of the GNU General Public License as published by the= Free > diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig > index 513f431..7cd4666 100644 > --- a/fs/reiserfs/Kconfig > +++ b/fs/reiserfs/Kconfig > @@ -10,7 +10,8 @@ config REISERFS_FS > =20 > =09 In general, ReiserFS is as fast as ext2, but is very efficient with > =09 large directories and small files. Additional patches are needed > -=09 for NFS and quotas, please see for links. > +=09 for NFS and quotas, please see=20 > +=09 for links. > =20 > =09 It is more easily extended to have features currently found in > =09 database and keyword search systems than block allocation based fil= e > @@ -18,7 +19,8 @@ config REISERFS_FS > =09 plugins consistent with our motto ``It takes more than a license to > =09 make source code open.'' > =20 > -=09 Read to learn more about reiserfs. > +=09 Read =20 > +=09 to learn more about reiserfs. > =20 > =09 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. > =20 > diff --git a/fs/reiserfs/README b/fs/reiserfs/README > index 14e8c9d..e2f7a26 100644 > --- a/fs/reiserfs/README > +++ b/fs/reiserfs/README > @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL ver= sion.) > [END LICENSING] > =20 > Reiserfs is a file system based on balanced tree algorithms, which is > -described at http://devlinux.com/namesys. > +described at https://reiser4.wiki.kernel.org/index.php/Main_Page=20 > =20 > Stop reading here. Go there, then return. > =20 > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h > index 4086b8e..da2530e 100644 > --- a/include/crypto/gf128mul.h > +++ b/include/crypto/gf128mul.h > @@ -54,8 +54,8 @@ > =20 > /* Comment by Rik: > * > - * For some background on GF(2^128) see for example: http://- > - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.= pdf > + * For some background on GF(2^128) see for example:=20 > + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gc= m/gcm-revised-spec.pdf=20 > * > * The elements of GF(2^128) :=3D GF(2)[X]/(X^128-X^7-X^2-X^1-1) can > * be mapped to computer memory in a variety of ways. Let's examine > diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h > index c2eeb63..61ce641 100644 > --- a/include/linux/fdreg.h > +++ b/include/linux/fdreg.h > @@ -89,7 +89,7 @@ > /* the following commands are new in the 82078. They are not used in the > * floppy driver, except the first three. These commands may be useful f= or apps > * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets = at > - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */ > + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ > =20 > #define FD_PARTID=09=090x18=09/* part id ("extended" version cmd) */ > #define FD_SAVE=09=09=090x2e=09/* save fdc regs for later restore */ > diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.= h > index 3e659ec..7d95847 100644 > --- a/include/linux/if_infiniband.h > +++ b/include/linux/if_infiniband.h > @@ -5,7 +5,7 @@ > * , or the OpenIB.org BSD > * license, available in the LICENSE.TXT file accompanying this > * software. These details are also available at > - * . > + * . > * > * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h > index de24af7..54b8e0d 100644 > --- a/include/linux/n_r3964.h > +++ b/include/linux/n_r3964.h > @@ -4,7 +4,6 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig > index 2a72aa9..705e53e 100644 > --- a/net/ax25/Kconfig > +++ b/net/ax25/Kconfig > @@ -7,7 +7,7 @@ menuconfig HAMRADIO > =09bool "Amateur Radio support" > =09help > =09 If you want to connect your Linux box to an amateur radio, answer Y > -=09 here. You want to read > +=09 here. You want to read > =09 and more specifically about AX.25 on Linux > =09 . > =20 > @@ -42,7 +42,7 @@ config AX25 > =09 check out the file in the > =09 kernel source. More information about digital amateur radio in > =09 general is on the WWW at > -=09 . > +=09 . > =20 > =09 To compile this driver as a module, choose M here: the > =09 module will be called ax25. > @@ -89,7 +89,7 @@ config NETROM > =09 . You also might want to check out the > =09 file . More information abo= ut > =09 digital amateur radio in general is on the WWW at > -=09 . > +=09 . > =20 > =09 To compile this driver as a module, choose M here: the > =09 module will be called netrom. > @@ -108,7 +108,7 @@ config ROSE > =09 . You also might want to check out the > =09 file . More information abo= ut > =09 digital amateur radio in general is on the WWW at > -=09 . > +=09 . > =20 > =09 To compile this driver as a module, choose M here: the > =09 module will be called rose. > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig > index 571f895..4123d5b 100644 > --- a/net/ipv4/Kconfig > +++ b/net/ipv4/Kconfig > @@ -84,7 +84,7 @@ config IP_FIB_TRIE > =20 > =09 An experimental study of compression methods for dynamic tries > =09 Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > -=09 http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > +=09 > =20 > endchoice > =20 > @@ -555,7 +555,7 @@ config TCP_CONG_VENO > =09distinguishing to circumvent the difficult judgment of the packet los= s > =09type. TCP Veno cuts down less congestion window in response to random > =09loss packets. > -=09See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > +=09See =20 > =20 > config TCP_CONG_YEAH > =09tristate "YeAH TCP" > diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c > index 3a92a76..094e150 100644 > --- a/net/ipv4/cipso_ipv4.c > +++ b/net/ipv4/cipso_ipv4.c > @@ -9,7 +9,7 @@ > * > * The CIPSO draft specification can be found in the kernel's Documentat= ion > * directory as well as the following URL: > - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-0= 1.txt > + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt > * The FIPS-188 specification can be found at the following URL: > * http://www.itl.nist.gov/fipspubs/fip188.htm > * > diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c > index 4a8e370..d9818c5 100644 > --- a/net/ipv4/fib_trie.c > +++ b/net/ipv4/fib_trie.c > @@ -16,7 +16,7 @@ > * > * An experimental study of compression methods for dynamic tries > * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + * http://www.csc.kth.se/~snilsson/software/dyntrie2/ > * > * > * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig > index 1833bdb..d048275 100644 > --- a/net/ipv4/netfilter/Kconfig > +++ b/net/ipv4/netfilter/Kconfig > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG > =09 which can only be viewed through syslog. > =20 > =09 The appropriate userspace logging daemon (ulogd) may be obtained fr= om > -=09 > +=09 > =20 > =09 To compile it as a module, choose M here. If unsure, say N. > =20 > diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c > index 1eba160..00ca688 100644 > --- a/net/ipv4/tcp_illinois.c > +++ b/net/ipv4/tcp_illinois.c > @@ -6,7 +6,7 @@ > * The algorithm is described in: > * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm > * for High-Speed Networks" > - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf > + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf > * > * Implemented from description in paper and ns-2 simulation. > * Copyright (C) 2007 Stephen Hemminger > diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c > index e663b78..bccce34 100644 > --- a/net/ipv4/tcp_input.c > +++ b/net/ipv4/tcp_input.c > @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss); > * > * The algorithm for RTT estimation w/o timestamps is based on > * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL. > - * > + * > * > * More detail on this code can be found at > - * , > + * , > * though this reference is out of date. A new paper > * is pending. > */ > diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c > index b612acf..38bc0b5 100644 > --- a/net/ipv4/tcp_veno.c > +++ b/net/ipv4/tcp_veno.c > @@ -6,7 +6,7 @@ > * "TCP Veno: TCP Enhancement for Transmission over Wireless Access N= etworks." > * IEEE Journal on Selected Areas in Communication, > * Feb. 2003. > - * =09See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + * =09See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal= /J3.pdf > */ > =20 > #include > diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_co= nntrack_proto_tcp.c > index c4c885d..3fb2b73 100644 > --- a/net/netfilter/nf_conntrack_proto_tcp.c > +++ b/net/netfilter/nf_conntrack_proto_tcp.c > @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct = tcphdr *tcph) > /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering > in IP Filter' by Guido van Rooij. > =20 > - http://www.nluug.nl/events/sane2000/papers.html > - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz > + http://www.sane.nl/events/sane2000/papers.html > + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/ > =20 > The boundaries and the conditions are changed according to RFC793: > the packet must intersect the window (i.e. segments may be > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c > index 456a1b4..854c303 100644 > --- a/sound/oss/ac97_codec.c > +++ b/sound/oss/ac97_codec.c > @@ -21,11 +21,8 @@ > * > ***********************************************************************= *** > * > - * The Intel Audio Codec '97 specification is available at the Intel > - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audi= o/ > - * > - * The specification itself is currently available at: > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf > + * The Intel Audio Codec '97 specification is available at: > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pd= f > * > ***********************************************************************= *** > * > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c > index c7fba53..537cfba 100644 > --- a/sound/pci/ens1370.c > +++ b/sound/pci/ens1370.c > @@ -22,7 +22,7 @@ > /* Power-Management-Code ( CONFIG_PM ) > * for ens1371 only ( FIXME ) > * derived from cs4281.c, atiixp.c and via82xx.c > - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.= htm > + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/=20 > * by Kurt J. Bosch > */ > =20 > diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c > index 4677492..400f9eb 100644 > --- a/sound/pci/intel8x0.c > +++ b/sound/pci/intel8x0.c > @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x= 0 *chip, struct ichdev *ich > * Intel 82443MX running a 100MHz processor system bus has a hardware bu= g, > * which aborts PCI busmaster for audio transfer. A workaround is to se= t > * the pages as non-cached. For details, see the errata in > - *=09http://www.intel.com/design/chipsets/specupdt/245051.htm > + *=09http://download.intel.com/design/chipsets/specupdt/24505108.pdf > */ > static void fill_nocache(void *buf, int size, int nocache) > { >=20 --0-1719167625-1285654952=:276--