Linux wireless drivers development
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH mt76-next 11/19] wifi: mt76: mt7996: set qos_ctl of a frame that hardware reordered
Date: Wed, 18 Nov 2026 09:50:23 +0100	[thread overview]
Message-ID: <av1mz3bO5hfltI-w@lore-qca> (raw)
In-Reply-To: <20261117180134.2940930-11-nbd@nbd.name>

[-- Attachment #1: Type: text/plain, Size: 1411 bytes --]

On Nov 17, Felix Fietkau wrote:
> mt7996_mac_fill_rx() returns before it sets status->qos_ctl for a frame
> that the hardware reordered. mt76_check_ccmp_pn() then checks every
> such frame against the counter of TID 0, so frames of different TIDs
> read as replays.
> 
> Set qos_ctl for these frames as well.
> 
> Fixes: 950d0abb5cd9 ("wifi: mt76: mt7996: add wed rx support")
> Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>

> ---
>  drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
> index 2e1d98bf823a..c70e429ab419 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
> @@ -707,12 +707,15 @@ mt7996_mac_fill_rx(struct mt7996_dev *dev, enum mt76_rxq_id q,
>  		}
>  	}
>  
> -	if (!status->wcid || !ieee80211_is_data_qos(fc) || hw_aggr)
> +	if (!status->wcid || !ieee80211_is_data_qos(fc))
> +		return 0;
> +
> +	status->qos_ctl = qos_ctl;
> +	if (hw_aggr)
>  		return 0;
>  
>  	status->aggr = unicast &&
>  		       !ieee80211_is_qos_nullfunc(fc);
> -	status->qos_ctl = qos_ctl;
>  	status->seqno = IEEE80211_SEQ_TO_SN(seq_ctrl);
>  
>  	return 0;
> -- 
> 2.47.3
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2026-11-18  8:50 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 18:01 [PATCH mt76-next 01/19] wifi: mt76: don't pin undrainable PS stations in the tx scheduler Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 02/19] wifi: mt76: mt7996: return a negative error for a firmware status Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 03/19] wifi: mt76: mt7996: use the default timeout for STA_REC and BSS_INFO Felix Fietkau
2026-11-18  8:22   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 04/19] wifi: mt76: mt7915: " Felix Fietkau
2026-11-18  8:23   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 05/19] wifi: mt76: delete only the RX NAPIs that were added Felix Fietkau
2026-11-18  8:32   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 06/19] wifi: mt76: mt7996: report radar on the channel context of its band Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 07/19] wifi: mt76: mt7996: stop WED before the DMA reset of a full reset Felix Fietkau
2026-11-18  8:38   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 08/19] wifi: mt76: skip the radiotap TLVs in mt76_skb_get_hdr() Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 09/19] wifi: mt76: find the first A-MSDU subframe behind the radiotap data Felix Fietkau
2026-11-18  8:43   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 10/19] wifi: mt76: mark all but the last subframe of an A-MSDU chain Felix Fietkau
2026-11-18  8:47   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 11/19] wifi: mt76: mt7996: set qos_ctl of a frame that hardware reordered Felix Fietkau
2026-11-18  8:50   ` Lorenzo Bianconi [this message]
2026-11-17 18:01 ` [PATCH mt76-next 12/19] wifi: mt76: check the PN of a BA session frame at its release Felix Fietkau
2026-11-18  8:55   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 13/19] wifi: mt76: check the RX PN of CCMP-256, GCMP and GCMP-256 keys Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 14/19] wifi: mt76: connac: return a negative error for a firmware status Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 15/19] wifi: mt76: guard the tx_list of every phy with one lock Felix Fietkau
2026-11-18  8:52   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 16/19] wifi: mt76: keep an unpublished wcid off the TX and poll lists Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 17/19] wifi: mt76: mt7925: do not take iflist_mtx under the mutex Felix Fietkau
2026-11-17 18:01 ` [PATCH mt76-next 18/19] wifi: mt76: mt7925: take each polled link under sta_poll_lock Felix Fietkau
2026-11-18  8:58   ` Lorenzo Bianconi
2026-11-17 18:01 ` [PATCH mt76-next 19/19] wifi: mt76: mt7615: take each polled station " Felix Fietkau
2026-11-18  8:57   ` Lorenzo Bianconi
2026-11-18  8:20 ` [PATCH mt76-next 01/19] wifi: mt76: don't pin undrainable PS stations in the tx scheduler Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=av1mz3bO5hfltI-w@lore-qca \
    --to=lorenzo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=nbd@nbd.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox