From: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
To: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Cc: Jeff Johnson <jjohnson@kernel.org>,
Carl Huang <quic_cjhuang@quicinc.com>,
Vasanthakumar Thiagarajan
<vasanthakumar.thiagarajan@oss.qualcomm.com>,
Bhagavathi Perumal S <quic_bperumal@quicinc.com>,
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>,
Wen Gong <quic_wgong@quicinc.com>,
P Praneesh <quic_ppranees@quicinc.com>,
Balamurugan Selvarajan <quic_bselvara@quicinc.com>,
Kalle Valo <kvalo@kernel.org>,
linux-wireless@vger.kernel.org, ath12k@lists.infradead.org
Subject: Re: [PATCH ath-next 1/3] wifi: ath12k: validate RX frame length before undecapsulation
Date: Fri, 13 Nov 2026 11:26:38 +0100 [thread overview]
Message-ID: <avbl3iulRGwsfLhR@lore-desk> (raw)
In-Reply-To: <4ae460ec-fe87-44e4-a6d2-e1d7f6391fba@oss.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 2931 bytes --]
>
>
> On 10/16/2026 11:16 PM, Lorenzo Bianconi wrote:
> > Reject truncated raw frames before removing the FCS trailer. Without this
> > check, subtracting FCS_LEN from a shorter skb underflows and leaves the
>
> skb_trim() has the check itself, so there will be no underflow?
I agree the commit message is misleading, I think we just need to return an
error in case the skb does not contain the FCS.
>
> > FCS untrimmed.
> >
> > Also verify that the frame contains enough data for the 802.11 header and
> > the crypto header before moving the header to make room for the crypto
> > parameters.
> >
> > Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
> >
> > Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
> > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
> > ---
> > drivers/net/wireless/ath/ath12k/dp_rx.c | 46 ++++++++++++++++++---------
> > drivers/net/wireless/ath/ath12k/dp_rx.h | 10 +++---
> > drivers/net/wireless/ath/ath12k/wifi7/dp_rx.c | 22 +++++++++----
> > 3 files changed, 51 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
> > index 36be543b7c50..40b8da34268f 100644
> > --- a/drivers/net/wireless/ath/ath12k/dp_rx.c
> > +++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
> > @@ -999,11 +999,11 @@ static void ath12k_dp_rx_h_undecap_nwifi(struct ath12k_pdev_dp *dp_pdev,
> > memcpy(skb_push(msdu, hdr_len), decap_hdr, hdr_len);
> > }
> >
> > -static void ath12k_dp_rx_h_undecap_raw(struct ath12k_pdev_dp *dp_pdev,
> > - struct sk_buff *msdu,
> > - enum hal_encrypt_type enctype,
> > - struct ieee80211_rx_status *status,
> > - bool decrypted)
> > +static int ath12k_dp_rx_h_undecap_raw(struct ath12k_pdev_dp *dp_pdev,
> > + struct sk_buff *msdu,
> > + enum hal_encrypt_type enctype,
> > + struct ieee80211_rx_status *status,
> > + bool decrypted)
> > {
> > struct ath12k_dp *dp = dp_pdev->dp;
> > struct ath12k_skb_rxcb *rxcb = ATH12K_SKB_RXCB(msdu);
> > @@ -1014,13 +1014,16 @@ static void ath12k_dp_rx_h_undecap_raw(struct ath12k_pdev_dp *dp_pdev,
> > if (!rxcb->is_first_msdu ||
> > !(rxcb->is_first_msdu && rxcb->is_last_msdu)) {
> > WARN_ON_ONCE(1);
> > - return;
> > + return 0;
> > }
> >
> > + if (msdu->len < FCS_LEN)
> > + return -EINVAL;
> > +
>
> every later trim in this function has the same problem: msdu->len minus the MIC, ICV or
> MMIC length is not checked either. should we add check for them as well?
ack, I will fix it in v2.
Regards,
Lorenzo
>
> > skb_trim(msdu, msdu->len - FCS_LEN);
> >
> > if (!decrypted)
> > - return;
> > + return 0;
> >
> > hdr = (void *)msdu->data;
> >
>
> [...]
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2026-11-13 10:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 15:16 [PATCH ath-next 0/3] wifi: ath12k: rely on ieee80211_rx_list() to send rx packets to mac80211 Lorenzo Bianconi
2026-10-16 15:16 ` [PATCH ath-next 1/3] wifi: ath12k: validate RX frame length before undecapsulation Lorenzo Bianconi
2026-11-09 5:32 ` Baochen Qiang
2026-11-13 10:26 ` Lorenzo Bianconi [this message]
2026-10-16 15:16 ` [PATCH ath-next 2/3] wifi: ath12k: rely on pskb_trim() to trim the received skb Lorenzo Bianconi
2026-11-09 5:32 ` Baochen Qiang
2026-10-16 15:16 ` [PATCH ath-next 3/3] wifi: ath12k: use ieee80211_rx_list() to deliver packets to mac80211 Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avbl3iulRGwsfLhR@lore-desk \
--to=lorenzo.bianconi@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=baochen.qiang@oss.qualcomm.com \
--cc=jjohnson@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_bperumal@quicinc.com \
--cc=quic_bselvara@quicinc.com \
--cc=quic_cjhuang@quicinc.com \
--cc=quic_ppranees@quicinc.com \
--cc=quic_pradeepc@quicinc.com \
--cc=quic_wgong@quicinc.com \
--cc=vasanthakumar.thiagarajan@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox