Re: [PATCH v3 7/8] arm64: dts: qcom: sdm845-db845c: describe WiFi/BT properly

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/26/26 2:59 AM, Dmitry Baryshkov wrote:
> On Thu, 26 Mar 2026 at 02:02, David Heidelberg <david@ixit.cz> wrote:
>>
>> On 19/01/2026 18:08, Dmitry Baryshkov wrote:
>>
>> [...]
>>
>>> +     wcn3990-pmu {
>>> +             compatible = "qcom,wcn3990-pmu";
>>> +
>>> +             pinctrl-0 = <&sw_ctrl_default>;
>>> +             pinctrl-names = "default";
>>> +
>>> +             vddio-supply = <&vreg_s4a_1p8>;
>>> +             vddxo-supply = <&vreg_l7a_1p8>;
>>> +             vddrf-supply = <&vreg_l17a_1p3>;
>>> +             vddch0-supply = <&vreg_l25a_3p3>;
>>> +             vddch1-supply = <&vreg_l23a_3p3>;
>>> +
>>> +             swctrl-gpios = <&pm8998_gpios 3 GPIO_ACTIVE_HIGH>;
>>
>> Do you know if the GPIO is common for whole sdm845, or it's only recommended as
>> reference design, or nothing?
>>
>> I did test defaulting to GPIO 3 on Pixel 3 and WiFi works as before, but since
>> previous downstream kernel didn't touched GPIO 3 at all, I'm worried about
>> toggling unrelated GPIO.
> 
> It is an input-only GPIO, but nevertheless, if you are not sure, just skip it.

I think you should be able to observe its state and deduce based on that

On a sidenote, 99.5% of reference design choices seem to hold true on at
least 90% of devices

Konrad