Linux wireless drivers development
 help / color / mirror / Atom feed
From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: luka.gejak@linux.dev, Ping-Ke Shih <pkshih@realtek.com>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	Michael Straube <straube.linux@gmail.com>,
	Peter Robinson <pbrobinson@gmail.com>
Subject: Re: [PATCH 07/19] wifi: rtw88: fw: add the vendor firmware commands used by RTL8723BS
Date: Sat, 25 Jul 2026 13:17:05 +0300	[thread overview]
Message-ID: <c767bcbb-a2d1-4ebb-bd67-0d9661b285cb@gmail.com> (raw)
In-Reply-To: <20260724181858.192903-8-luka.gejak@linux.dev>

On 24/07/2026 21:18, luka.gejak@linux.dev wrote:
> From: Luka Gejak <luka.gejak@linux.dev>
> 
> The RTL8723BS join and coexistence sequences need four commands that
> rtw88 does not implement: MACID_CFG to configure rate adaptation after
> association, the WL channel info report, the firmware GNT_BT state, and
> the coexistence antenna select reserve that forms part of the vendor
> initialisation toggle.

But rtw88 does implement the first two.

> 
> Add them here so the coexistence and association changes that follow
> have the commands available.
> 
> Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
> ---
>  drivers/net/wireless/realtek/rtw88/fw.c | 59 +++++++++++++++++++++++++
>  drivers/net/wireless/realtek/rtw88/fw.h | 13 ++++++
>  2 files changed, 72 insertions(+)
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
> index 87da0dd82aaa..b43ee5d951fd 100644
> --- a/drivers/net/wireless/realtek/rtw88/fw.c
> +++ b/drivers/net/wireless/realtek/rtw88/fw.c
> @@ -856,6 +856,65 @@ void rtw_fw_media_status_report(struct rtw_dev *rtwdev, u8 mac_id, bool connect)
>  	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
>  }
>  
> +/* 8723BS SDIO: post-assoc rate-adaptation config in the vendor v5.2.17
> + * MACID_CFG byte layout. disra (bit7 of [2]) must stay 0 so the firmware keeps
> + * running rate adaptation for this mac_id.
> + */
> +void rtw_fw_macid_cfg(struct rtw_dev *rtwdev, u8 mac_id, u8 raid, u8 bw,
> +		      u8 sgi, u32 rate_mask)
> +{
> +	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
> +
> +	SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_RA_INFO);
> +
> +	h2c_pkt[1] = mac_id & 0x7f;
> +	h2c_pkt[2] = (raid & 0x1f) | (sgi ? BIT(7) : 0) | 0x60;
> +	h2c_pkt[3] = (bw ? 3 : 1) & 0x3;
> +	h2c_pkt[4] = rate_mask & 0xff;
> +	h2c_pkt[5] = (rate_mask >> 8) & 0xff;
> +	h2c_pkt[6] = (rate_mask >> 16) & 0xff;
> +	h2c_pkt[7] = (rate_mask >> 24) & 0xff;
> +
> +	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
> +}
> +
> +/* 8723BS SDIO: report the connected channel/bandwidth to the vendor firmware. */
> +void rtw_fw_send_wl_ch_info(struct rtw_dev *rtwdev, u8 ch, u8 bw)
> +{
> +	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
> +	u8 bw_byte = bw == RTW_CHANNEL_WIDTH_40 ? 0x30 : 0x20;
> +
> +	SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_WL_CH_INFO);
> +	h2c_pkt[1] = 0x00;
> +	h2c_pkt[2] = ch;
> +	h2c_pkt[3] = bw_byte;
> +
> +	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
> +}
> +
> +/* 8723BS SDIO: set the firmware GNT_BT state (0 = WiFi owns the antenna). */
> +void rtw_fw_set_gnt_bt(struct rtw_dev *rtwdev, u8 state)
> +{
> +	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
> +
> +	SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_GNT_BT);
> +	SET_GNT_BT_STATE(h2c_pkt, state);
> +
> +	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
> +}
> +
> +/* 8723BS SDIO: vendor coex antenna-select reserve H2C (part of the init toggle). */
> +void rtw_fw_coex_ant_sel_rsv(struct rtw_dev *rtwdev, u8 inverse, u8 type)
> +{
> +	u8 h2c_pkt[H2C_PKT_SIZE] = {0};
> +
> +	SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_COEX_ANT_SEL_RSV);
> +	SET_COEX_ANT_SEL_RSV_INVERSE(h2c_pkt, inverse);
> +	SET_COEX_ANT_SEL_RSV_TYPE(h2c_pkt, type);
> +
> +	rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
> +}
> +
>  void rtw_fw_update_wl_phy_info(struct rtw_dev *rtwdev)
>  {
>  	struct rtw_traffic_stats *stats = &rtwdev->stats;
> diff --git a/drivers/net/wireless/realtek/rtw88/fw.h b/drivers/net/wireless/realtek/rtw88/fw.h
> index 6927d2041d24..8b238b41decf 100644
> --- a/drivers/net/wireless/realtek/rtw88/fw.h
> +++ b/drivers/net/wireless/realtek/rtw88/fw.h
> @@ -572,10 +572,12 @@ static inline void rtw_h2c_pkt_set_header(u8 *h2c_pkt, u8 sub_id)
>  #define H2C_CMD_QUERY_BT_INFO		0x61
>  #define H2C_CMD_FORCE_BT_TX_POWER	0x62
>  #define H2C_CMD_IGNORE_WLAN_ACTION	0x63
> +#define H2C_CMD_COEX_ANT_SEL_RSV	0x65
>  #define H2C_CMD_WL_CH_INFO		0x66
>  #define H2C_CMD_QUERY_BT_MP_INFO	0x67
>  #define H2C_CMD_BT_WIFI_CONTROL		0x69
>  #define H2C_CMD_WIFI_CALIBRATION	0x6d
> +#define H2C_CMD_GNT_BT			0x6e
>  #define H2C_CMD_QUERY_BT_HID_INFO	0x73
>  
>  #define H2C_CMD_KEEP_ALIVE		0x03
> @@ -688,6 +690,12 @@ static inline void rtw_h2c_pkt_set_header(u8 *h2c_pkt, u8 sub_id)
>  	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x01, value, GENMASK(31, 24))
>  #define SET_QUERY_BT_INFO(h2c_pkt, value)                                      \
>  	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x00, value, BIT(8))
> +#define SET_GNT_BT_STATE(h2c_pkt, value)                                       \
> +	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x00, value, BIT(8))
> +#define SET_COEX_ANT_SEL_RSV_INVERSE(h2c_pkt, value)                           \
> +	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x00, value, GENMASK(15, 8))
> +#define SET_COEX_ANT_SEL_RSV_TYPE(h2c_pkt, value)                              \
> +	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x00, value, GENMASK(23, 16))
>  #define SET_WL_CH_INFO_LINK(h2c_pkt, value)                                    \
>  	le32p_replace_bits((__le32 *)(h2c_pkt) + 0x00, value, GENMASK(15, 8))
>  #define SET_WL_CH_INFO_CHNL(h2c_pkt, value)                                    \
> @@ -853,6 +861,11 @@ void rtw_fw_send_rssi_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si);
>  void rtw_fw_send_ra_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si,
>  			 bool reset_ra_mask);
>  void rtw_fw_media_status_report(struct rtw_dev *rtwdev, u8 mac_id, bool conn);
> +void rtw_fw_macid_cfg(struct rtw_dev *rtwdev, u8 mac_id, u8 raid, u8 bw,
> +		      u8 sgi, u32 rate_mask);
> +void rtw_fw_send_wl_ch_info(struct rtw_dev *rtwdev, u8 ch, u8 bw);
> +void rtw_fw_set_gnt_bt(struct rtw_dev *rtwdev, u8 state);
> +void rtw_fw_coex_ant_sel_rsv(struct rtw_dev *rtwdev, u8 inverse, u8 type);
>  void rtw_fw_update_wl_phy_info(struct rtw_dev *rtwdev);
>  void rtw_fw_beacon_filter_config(struct rtw_dev *rtwdev, bool connect,
>  				 struct ieee80211_vif *vif);


  reply	other threads:[~2026-07-25 10:17 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-24 18:18 [PATCH 00/19] wifi: rtw88: preparations for RTL8723B/RTL8723BS luka.gejak
2026-07-24 18:18 ` [PATCH 01/19] wifi: rtw88: add the RTL8723B chip type and SDIO helper luka.gejak
2026-07-24 18:18 ` [PATCH 02/19] wifi: rtw88: rx: mark zero length packets on RTL8723B luka.gejak
2026-07-24 22:34   ` Bitterblue Smith
2026-07-24 18:18 ` [PATCH 03/19] wifi: rtw88: tx: extend the TX report purge timeout to RTL8723BS luka.gejak
2026-07-24 18:18 ` [PATCH 04/19] wifi: rtw88: fw: handle the RTL8723BS management TX reports luka.gejak
2026-07-24 22:53   ` Bitterblue Smith
2026-07-24 18:18 ` [PATCH 05/19] wifi: rtw88: fw: send rate adaptation and RSSI info in the vendor layout luka.gejak
2026-07-24 23:46   ` Bitterblue Smith
2026-07-24 18:18 ` [PATCH 06/19] wifi: rtw88: fw: send the media status report " luka.gejak
2026-07-24 23:52   ` Bitterblue Smith
2026-07-24 18:18 ` [PATCH 07/19] wifi: rtw88: fw: add the vendor firmware commands used by RTL8723BS luka.gejak
2026-07-25 10:17   ` Bitterblue Smith [this message]
2026-07-24 18:18 ` [PATCH 08/19] wifi: rtw88: fw: fix the reserved page upload on RTL8723BS luka.gejak
2026-07-24 18:18 ` [PATCH 09/19] wifi: rtw88: coex: add the RTL8723BS scan antenna workaround luka.gejak
2026-07-24 18:32 ` [PATCH 10/19] wifi: rtw88: coex: reassert the antenna path when associating luka.gejak
2026-07-24 18:32 ` [PATCH 11/19] wifi: rtw88: sdio: track free TX pages and OQT credits for RTL8723BS luka.gejak
2026-07-24 18:32 ` [PATCH 12/19] wifi: rtw88: sdio: handle the RTL8723BS management TX path luka.gejak
2026-07-25 11:08   ` Bitterblue Smith
2026-07-24 18:32 ` [PATCH 13/19] wifi: rtw88: sdio: set up RX aggregation and interrupts for RTL8723BS luka.gejak
2026-07-25 11:25   ` Bitterblue Smith
2026-07-24 18:32 ` [PATCH 14/19] wifi: rtw88: sdio: add TX back-pressure and retry on page starvation luka.gejak
2026-07-24 18:32 ` [PATCH 15/19] wifi: rtw88: record beacons from the target BSSID before authenticating luka.gejak
2026-07-24 18:32 ` [PATCH 16/19] wifi: rtw88: run the RTL8723BS association register sequence luka.gejak
2026-07-24 18:33 ` [PATCH 17/19] wifi: rtw88: calibrate and tune the PHY for RTL8723BS luka.gejak
2026-07-24 21:05   ` Bitterblue Smith
2026-07-24 18:33 ` [PATCH 18/19] wifi: rtw88: match the RTL8723BS firmware connect and power save behaviour luka.gejak
2026-07-24 22:10   ` Bitterblue Smith
2026-07-24 18:33 ` [PATCH 19/19] wifi: rtw88: advertise the correct receive capabilities on RTL8723BS luka.gejak
2026-07-24 22:29   ` Bitterblue Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c767bcbb-a2d1-4ebb-bd67-0d9661b285cb@gmail.com \
    --to=rtl8821cerfe2@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luka.gejak@linux.dev \
    --cc=pbrobinson@gmail.com \
    --cc=pkshih@realtek.com \
    --cc=straube.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox