* [PATCH v2 1/4] ath10k: rename Mesh related service names
2016-01-28 21:54 [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Peter Oh
@ 2016-01-28 21:54 ` Peter Oh
2016-01-28 21:54 ` [PATCH v2 2/4] ath10k: update 10.4 WMI service map Peter Oh
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Peter Oh @ 2016-01-28 21:54 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
WMI_10_4_SERVICE_MESH bit is for non IEEE802.11s Mesh.
Hence rename it to WMI_10_4_SERVICE_MESH_NON_11S.
Also add _11S as post-fix to each of WMI_SERVICE_MESH and
WMI_VDEV_SUBTYPE_MESH specifying the service is for 11s Mesh.
This will help users to distinguish 11s Mesh from non 11s Mesh.
Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++--
drivers/net/wireless/ath/ath10k/wmi.h | 16 +++++++++-------
2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ef0438d..1406b0f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4380,8 +4380,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
break;
case NL80211_IFTYPE_MESH_POINT:
- if (test_bit(WMI_SERVICE_MESH, ar->wmi.svc_map)) {
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH;
+ if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
ret = -EINVAL;
ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 806d4bb..0458bf6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -176,7 +176,8 @@ enum wmi_service {
WMI_SERVICE_AUX_CHAN_LOAD_INTF,
WMI_SERVICE_BSS_CHANNEL_INFO_64,
WMI_SERVICE_EXT_RES_CFG_SUPPORT,
- WMI_SERVICE_MESH,
+ WMI_SERVICE_MESH_11S,
+ WMI_SERVICE_MESH_NON_11S,
WMI_SERVICE_PEER_STATS,
/* keep last */
@@ -296,7 +297,7 @@ enum wmi_10_4_service {
WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
- WMI_10_4_SERVICE_MESH,
+ WMI_10_4_SERVICE_MESH_NON_11S,
};
static inline char *wmi_service_name(int service_id)
@@ -387,7 +388,8 @@ static inline char *wmi_service_name(int service_id)
SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
- SVCSTR(WMI_SERVICE_MESH);
+ SVCSTR(WMI_SERVICE_MESH_11S);
+ SVCSTR(WMI_SERVICE_MESH_NON_11S);
SVCSTR(WMI_SERVICE_PEER_STATS);
default:
return NULL;
@@ -463,7 +465,7 @@ static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
SVCMAP(WMI_10X_SERVICE_MESH,
- WMI_SERVICE_MESH, len);
+ WMI_SERVICE_MESH_11S, len);
SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
SVCMAP(WMI_10X_SERVICE_PEER_STATS,
@@ -628,8 +630,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
- SVCMAP(WMI_10_4_SERVICE_MESH,
- WMI_SERVICE_MESH, len);
+ SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
+ WMI_SERVICE_MESH_NON_11S, len);
}
#undef SVCMAP
@@ -4287,7 +4289,7 @@ enum wmi_vdev_subtype {
WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
WMI_VDEV_SUBTYPE_P2P_GO = 3,
WMI_VDEV_SUBTYPE_PROXY_STA = 4,
- WMI_VDEV_SUBTYPE_MESH = 5,
+ WMI_VDEV_SUBTYPE_MESH_11S = 5,
};
/* values for vdev_subtype */
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/4] ath10k: update 10.4 WMI service map
2016-01-28 21:54 [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Peter Oh
2016-01-28 21:54 ` [PATCH v2 1/4] ath10k: rename Mesh related service names Peter Oh
@ 2016-01-28 21:54 ` Peter Oh
2016-01-28 21:54 ` [PATCH v2 3/4] ath10k: use vif->type and vif->p2p for P2P_GO check Peter Oh
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Peter Oh @ 2016-01-28 21:54 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
Update 10.4 WMI service map to sync to the latest 10.4 firmware
as of 1/20/2016.
Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/wmi.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 0458bf6..031018a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -179,6 +179,7 @@ enum wmi_service {
WMI_SERVICE_MESH_11S,
WMI_SERVICE_MESH_NON_11S,
WMI_SERVICE_PEER_STATS,
+ WMI_SERVICE_RESTRT_CHNL_SUPPORT,
/* keep last */
WMI_SERVICE_MAX,
@@ -298,6 +299,9 @@ enum wmi_10_4_service {
WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
WMI_10_4_SERVICE_MESH_NON_11S,
+ WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+ WMI_10_4_SERVICE_PEER_STATS,
+ WMI_10_4_SERVICE_MESH_11S,
};
static inline char *wmi_service_name(int service_id)
@@ -391,6 +395,7 @@ static inline char *wmi_service_name(int service_id)
SVCSTR(WMI_SERVICE_MESH_11S);
SVCSTR(WMI_SERVICE_MESH_NON_11S);
SVCSTR(WMI_SERVICE_PEER_STATS);
+ SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
default:
return NULL;
}
@@ -632,6 +637,12 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
WMI_SERVICE_MESH_NON_11S, len);
+ SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
+ WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
+ WMI_SERVICE_PEER_STATS, len);
+ SVCMAP(WMI_10_4_SERVICE_MESH_11S,
+ WMI_SERVICE_MESH_11S, len);
}
#undef SVCMAP
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 3/4] ath10k: use vif->type and vif->p2p for P2P_GO check
2016-01-28 21:54 [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Peter Oh
2016-01-28 21:54 ` [PATCH v2 1/4] ath10k: rename Mesh related service names Peter Oh
2016-01-28 21:54 ` [PATCH v2 2/4] ath10k: update 10.4 WMI service map Peter Oh
@ 2016-01-28 21:54 ` Peter Oh
2016-01-28 21:54 ` [PATCH v2 4/4] ath10k: add abstraction layer for vdev subtype Peter Oh
2016-02-24 13:51 ` [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Valo, Kalle
4 siblings, 0 replies; 6+ messages in thread
From: Peter Oh @ 2016-01-28 21:54 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
Interface type P2P_GO can be checked by either arvif->vdev_type
and arvif->vdev_subtype or vif->type and vif->p2p.
Use later one to avoid more cpu consumption that could happen
when subtype abstraction layer change is introduced.
Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 8 ++------
drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
2 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1406b0f..addf3cb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1358,10 +1358,7 @@ static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
const u8 *p2p_ie;
int ret;
- if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
- return 0;
-
- if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ if (arvif->vif->type != NL80211_IFTYPE_AP || !arvif->vif->p2p)
return 0;
mgmt = (void *)bcn->data;
@@ -3259,8 +3256,7 @@ static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
/* This is case only for P2P_GO */
- if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
- arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ if (vif->type != NL80211_IFTYPE_AP || !vif->p2p)
return;
if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 0f01a8d..5158716 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3196,7 +3196,7 @@ static void ath10k_wmi_update_noa(struct ath10k *ar, struct ath10k_vif *arvif,
struct sk_buff *bcn,
const struct wmi_p2p_noa_info *noa)
{
- if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ if (!arvif->vif->p2p)
return;
ath10k_dbg(ar, ATH10K_DBG_MGMT, "noa changed: %d\n", noa->changed);
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 4/4] ath10k: add abstraction layer for vdev subtype
2016-01-28 21:54 [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Peter Oh
` (2 preceding siblings ...)
2016-01-28 21:54 ` [PATCH v2 3/4] ath10k: use vif->type and vif->p2p for P2P_GO check Peter Oh
@ 2016-01-28 21:54 ` Peter Oh
2016-02-24 13:51 ` [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Valo, Kalle
4 siblings, 0 replies; 6+ messages in thread
From: Peter Oh @ 2016-01-28 21:54 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless
Abstraction layer for vdev subtype is added to solve
subtype mismatch and to give flexible compatibility
among different firmware revisions.
For instance, 10.2 and 10.4 firmware has different
definition of their vdev subtypes for Mesh.
10.4 defined subtype 6 for 802.11s Mesh while 10.2 uses 5.
Hence use the abstraction API to get right subtype to use.
Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 15 ++++---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 11 +++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
drivers/net/wireless/ath/ath10k/wmi.c | 70 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 42 ++++++++++++++++---
5 files changed, 128 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index addf3cb..96e2f8a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4359,25 +4359,29 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
bit, ar->free_vdev_map);
arvif->vdev_id = bit;
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+ arvif->vdev_subtype =
+ ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE);
switch (vif->type) {
case NL80211_IFTYPE_P2P_DEVICE:
arvif->vdev_type = WMI_VDEV_TYPE_STA;
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+ arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+ (ar, WMI_VDEV_SUBTYPE_P2P_DEVICE);
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_STATION:
arvif->vdev_type = WMI_VDEV_TYPE_STA;
if (vif->p2p)
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+ arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+ (ar, WMI_VDEV_SUBTYPE_P2P_CLIENT);
break;
case NL80211_IFTYPE_ADHOC:
arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
break;
case NL80211_IFTYPE_MESH_POINT:
if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) {
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
+ arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+ (ar, WMI_VDEV_SUBTYPE_MESH_11S);
} else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
ret = -EINVAL;
ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n");
@@ -4389,7 +4393,8 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
arvif->vdev_type = WMI_VDEV_TYPE_AP;
if (vif->p2p)
- arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+ arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype
+ (ar, WMI_VDEV_SUBTYPE_P2P_GO);
break;
case NL80211_IFTYPE_MONITOR:
arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 8f4f6a8..32ab34e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -186,6 +186,8 @@ struct wmi_ops {
u8 enable,
u32 detect_level,
u32 detect_margin);
+ int (*get_vdev_subtype)(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype);
};
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1327,4 +1329,13 @@ ath10k_wmi_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
ar->wmi.cmd->pdev_enable_adaptive_cca_cmdid);
}
+static inline int
+ath10k_wmi_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype)
+{
+ if (!ar->wmi.ops->get_vdev_subtype)
+ return -EOPNOTSUPP;
+
+ return ar->wmi.ops->get_vdev_subtype(ar, subtype);
+}
+
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 3b3a27b..1085932 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3483,6 +3483,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_tdls_peer_update = ath10k_wmi_tlv_op_gen_tdls_peer_update,
.gen_adaptive_qcs = ath10k_wmi_tlv_op_gen_adaptive_qcs,
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
};
static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 5158716..04799c7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -7413,6 +7413,71 @@ unlock:
buf[len] = 0;
}
+int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype)
+{
+ switch (subtype) {
+ case WMI_VDEV_SUBTYPE_NONE:
+ return WMI_VDEV_SUBTYPE_LEGACY_NONE;
+ case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+ return WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV;
+ case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+ return WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI;
+ case WMI_VDEV_SUBTYPE_P2P_GO:
+ return WMI_VDEV_SUBTYPE_LEGACY_P2P_GO;
+ case WMI_VDEV_SUBTYPE_PROXY_STA:
+ return WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA;
+ case WMI_VDEV_SUBTYPE_MESH_11S:
+ case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+ return -ENOTSUPP;
+ }
+ return -ENOTSUPP;
+}
+
+static int ath10k_wmi_10_2_4_op_get_vdev_subtype(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype)
+{
+ switch (subtype) {
+ case WMI_VDEV_SUBTYPE_NONE:
+ return WMI_VDEV_SUBTYPE_10_2_4_NONE;
+ case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+ return WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV;
+ case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+ return WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI;
+ case WMI_VDEV_SUBTYPE_P2P_GO:
+ return WMI_VDEV_SUBTYPE_10_2_4_P2P_GO;
+ case WMI_VDEV_SUBTYPE_PROXY_STA:
+ return WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA;
+ case WMI_VDEV_SUBTYPE_MESH_11S:
+ return WMI_VDEV_SUBTYPE_10_2_4_MESH_11S;
+ case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+ return -ENOTSUPP;
+ }
+ return -ENOTSUPP;
+}
+
+static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype)
+{
+ switch (subtype) {
+ case WMI_VDEV_SUBTYPE_NONE:
+ return WMI_VDEV_SUBTYPE_10_4_NONE;
+ case WMI_VDEV_SUBTYPE_P2P_DEVICE:
+ return WMI_VDEV_SUBTYPE_10_4_P2P_DEV;
+ case WMI_VDEV_SUBTYPE_P2P_CLIENT:
+ return WMI_VDEV_SUBTYPE_10_4_P2P_CLI;
+ case WMI_VDEV_SUBTYPE_P2P_GO:
+ return WMI_VDEV_SUBTYPE_10_4_P2P_GO;
+ case WMI_VDEV_SUBTYPE_PROXY_STA:
+ return WMI_VDEV_SUBTYPE_10_4_PROXY_STA;
+ case WMI_VDEV_SUBTYPE_MESH_11S:
+ return WMI_VDEV_SUBTYPE_10_4_MESH_11S;
+ case WMI_VDEV_SUBTYPE_MESH_NON_11S:
+ return WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S;
+ }
+ return -ENOTSUPP;
+}
+
static const struct wmi_ops wmi_ops = {
.rx = ath10k_wmi_op_rx,
.map_svc = wmi_main_svc_map,
@@ -7472,6 +7537,7 @@ static const struct wmi_ops wmi_ops = {
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
.gen_delba_send = ath10k_wmi_op_gen_delba_send,
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
@@ -7539,6 +7605,7 @@ static const struct wmi_ops wmi_10_1_ops = {
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
.gen_delba_send = ath10k_wmi_op_gen_delba_send,
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
@@ -7607,6 +7674,7 @@ static const struct wmi_ops wmi_10_2_ops = {
.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
.gen_delba_send = ath10k_wmi_op_gen_delba_send,
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
+ .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
/* .gen_pdev_enable_adaptive_cca not implemented */
};
@@ -7673,6 +7741,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
.gen_pdev_enable_adaptive_cca =
ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
+ .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
@@ -7739,6 +7808,7 @@ static const struct wmi_ops wmi_10_4_ops = {
/* shared with 10.2 */
.gen_request_stats = ath10k_wmi_op_gen_request_stats,
.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
+ .get_vdev_subtype = ath10k_wmi_10_4_op_get_vdev_subtype,
};
int ath10k_wmi_attach(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 031018a..049c618 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4295,12 +4295,40 @@ enum wmi_vdev_type {
};
enum wmi_vdev_subtype {
- WMI_VDEV_SUBTYPE_NONE = 0,
- WMI_VDEV_SUBTYPE_P2P_DEVICE = 1,
- WMI_VDEV_SUBTYPE_P2P_CLIENT = 2,
- WMI_VDEV_SUBTYPE_P2P_GO = 3,
- WMI_VDEV_SUBTYPE_PROXY_STA = 4,
- WMI_VDEV_SUBTYPE_MESH_11S = 5,
+ WMI_VDEV_SUBTYPE_NONE,
+ WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ WMI_VDEV_SUBTYPE_P2P_CLIENT,
+ WMI_VDEV_SUBTYPE_P2P_GO,
+ WMI_VDEV_SUBTYPE_PROXY_STA,
+ WMI_VDEV_SUBTYPE_MESH_11S,
+ WMI_VDEV_SUBTYPE_MESH_NON_11S,
+};
+
+enum wmi_vdev_subtype_legacy {
+ WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
+};
+
+enum wmi_vdev_subtype_10_2_4 {
+ WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
+ WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
+};
+
+enum wmi_vdev_subtype_10_4 {
+ WMI_VDEV_SUBTYPE_10_4_NONE = 0,
+ WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
+ WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
+ WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
+ WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
+ WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
+ WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
};
/* values for vdev_subtype */
@@ -6471,5 +6499,7 @@ size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
struct ath10k_fw_stats *fw_stats,
char *buf);
+int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
+ enum wmi_vdev_subtype subtype);
#endif /* _WMI_H_ */
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer
2016-01-28 21:54 [PATCH v2 0/4] ath10k: rename mesh and add abstraction layer Peter Oh
` (3 preceding siblings ...)
2016-01-28 21:54 ` [PATCH v2 4/4] ath10k: add abstraction layer for vdev subtype Peter Oh
@ 2016-02-24 13:51 ` Valo, Kalle
4 siblings, 0 replies; 6+ messages in thread
From: Valo, Kalle @ 2016-02-24 13:51 UTC (permalink / raw)
To: Oh, Peter; +Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org
Peter Oh <poh@qca.qualcomm.com> writes:
> Split Mesh service to 11s Mesh and non-11s Mesh according to
> firmware service bit to help users distinguish 11s Mesh from
> non 11s Mesh.
> And add abstraction layer for vdev subtype to solve subtype mismatch
> and to give flexible compatibility among different firmware revisions.
>
> v2:
> * Rebased. No code changes.
>
> Peter Oh (4):
> ath10k: rename Mesh related service names
> ath10k: update 10.4 WMI service map
> ath10k: use vif->type and vif->p2p for P2P_GO check
> ath10k: add abstraction layer for vdev subtype
All applied, thanks.
--
Kalle Valo
^ permalink raw reply [flat|nested] 6+ messages in thread