[PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20260130

[PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20260130

[Jeff Johnson]

Hi,
Here's a new pull request for ath10k, ath11k and ath12k.

No updates for ath10k.

For ath11k:

Update board file for QCA6698AQ/hw2.1 to support:
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268,variant=QC_SA8775P_Ride
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=255,variant=QC_SA8775P_Ride
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618,variant=QC_QCS615_Ride

Update board file for WCN6855/hw2.0 to support:
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268,variant=QC_Hamoa_IOT_EVK
bus=pci,vendor=17cb,device=1103,subsystem-vendor=105b,subsystem-device=e105,qmi-chip-id=2,qmi-board-id=268,variant=QC_SA8775P_Ride
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=34618,variant=QC_QCS615_Ride

For ath12k:

Update firmware for QCN9274/hw2.0.

Update board file for WCN7850/hw2.0 to support:
bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8001,qmi-chip-id=2,qmi-board-id=255
bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8004,qmi-chip-id=2,qmi-board-id=255


Please let me know if there are any problems.

Thanks,
/jeff
---

The following changes since commit 0882248d05045565bfefe1f07cbfc22276c9f058:

  Merge branch 'lenovo-ish-uspstream-clean' into 'main' (2026-01-23 19:26:31 +0000)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ath/linux-firmware.git ath-20260130

for you to fetch changes up to 09167289ec698099435e499e45c5788015d26783:

  ath12k: WCN7850 hw2.0: update board-2.bin (2026-01-30 12:17:30 -0800)

----------------------------------------------------------------
Jeff Johnson (4):
      ath11k: QCA6698AQ hw2.1: update board-2.bin
      ath11k: WCN6855 hw2.0: update board-2.bin
      ath12k: QCN9274 hw2.0: update to WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
      ath12k: WCN7850 hw2.0: update board-2.bin

 WHENCE                              |   2 +-
 ath11k/QCA6698AQ/hw2.1/board-2.bin  | Bin 986384 -> 1046928 bytes
 ath11k/WCN6855/hw2.0/board-2.bin    | Bin 7056532 -> 7117076 bytes
 ath12k/QCN9274/hw2.0/firmware-2.bin | Bin 15183928 -> 16035896 bytes
 ath12k/WCN7850/hw2.0/board-2.bin    | Bin 2253732 -> 2253964 bytes
 5 files changed, 1 insertion(+), 1 deletion(-)

Re: [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20260130

[Dmitry Baryshkov]

On Fri, Jan 30, 2026 at 12:29:48PM -0800, Jeff Johnson wrote:
> Hi,
> Here's a new pull request for ath10k, ath11k and ath12k.
> 
> For ath12k:
> 
> Update firmware for QCN9274/hw2.0.
> 
> Update board file for WCN7850/hw2.0 to support:
> bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8001,qmi-chip-id=2,qmi-board-id=255
> bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8004,qmi-chip-id=2,qmi-board-id=255

These two were not a part of the previous upload, but... They again have
board-id of 255 (unprogrammed). Why is there no calibration variant?

> 
> 
> Please let me know if there are any problems.

-- 
With best wishes
Dmitry

Re: [PULL linux-firmware] ath10k, ath11k and ath12k firmware ath-20260130

[Dmitry Baryshkov]

On Sat, Jan 31, 2026 at 08:39:57AM +0200, Dmitry Baryshkov wrote:
> On Fri, Jan 30, 2026 at 12:29:48PM -0800, Jeff Johnson wrote:
> > Hi,
> > Here's a new pull request for ath10k, ath11k and ath12k.
> > 
> > For ath12k:
> > 
> > Update firmware for QCN9274/hw2.0.
> > 
> > Update board file for WCN7850/hw2.0 to support:
> > bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8001,qmi-chip-id=2,qmi-board-id=255
> > bus=pci,vendor=17cb,device=1107,subsystem-vendor=1eac,subsystem-device=8004,qmi-chip-id=2,qmi-board-id=255
> 
> These two were not a part of the previous upload, but... They again have
> board-id of 255 (unprogrammed). Why is there no calibration variant?

Our engineers clarified that for the PCIe cards with the programmed
subsystem-vendor and device we don't need calibration variant even if
board-id is 255.

Merged and pushed out: https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/899

> 
> > 
> > 
> > Please let me know if there are any problems.
> 
> -- 
> With best wishes
> Dmitry

-- 
With best wishes
Dmitry