RE: Lenovo LOQ rtw_8852be

[Ping-Ke Shih <pkshih@realtek.com>]

> -----Original Message-----
> From: Ali Ghandour <gandour.ali@gmail.com>
> Sent: Tuesday, December 12, 2023 1:36 PM
> To: Ping-Ke Shih <pkshih@realtek.com>
> Cc: linux-wireless@vger.kernel.org
> Subject: Re: Lenovo LOQ rtw_8852be
> 
> > Please try below workaround patch to ignore the setting. I have tried that, and
> > in my side it still works without obvious problem. I will check internally to
> > check how much this can affect. If not, I would ignore this if certain platform
> > like yours can't access PCI space over 0x100.
> 
> I was able to connect. Thanks a lot Ping-Ke!
> 

Good. Please use it as usual and monitor if it works stable. I would like
take your results as reference to decide how I can modify the driver. 

> [  609.796171] rtw89_8852be 0000:09:00.0: failed to set CLKREQ Delay
> [  609.796175] rtw89_8852be 0000:09:00.0: failed to set CLKREQ_L1, ret=-22
> [  609.796177] rtw89_8852be 0000:09:00.0: failed to read ASPM Delay
> [  609.796177] rtw89_8852be 0000:09:00.0: failed to read ASPM Delay
> [  609.796178] rtw89_8852be 0000:09:00.0: failed to set ASPM L1, ret=-22

These mean we fail to access more PCI config space over 0x100. I will
consider these cases as well.

Ping-Ke