From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Subject: [PATCH rtw-next v3 05/14] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb
Date: Fri, 20 Jun 2025 21:57:59 +0300 [thread overview]
Message-ID: <d57c0958-2ca5-484d-88ff-0a7640488335@gmail.com> (raw)
In-Reply-To: <d055bd81-6c79-46f5-8d6d-62185cc65630@gmail.com>
"hfc" means "hci fc" which is "Host Control Interface Flow Control".
These are some parameters needed for RTL8851BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Adapt to the changes in patch 3.
- Add more information in the commit message.
v3:
- Add Acked-by.
- Adjust the wording of the commit message.
---
drivers/net/wireless/realtek/rtw89/rtw8851b.c | 46 ++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/rtw8851b.c b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
index 55703de9920a..e6ca3b045fc2 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8851b.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8851b.c
@@ -51,6 +51,48 @@ static const struct rtw89_hfc_param_ini rtw8851b_hfc_param_ini_pcie[] = {
[RTW89_QTA_INVALID] = {NULL},
};
+static const struct rtw89_hfc_ch_cfg rtw8851b_hfc_chcfg_usb[] = {
+ {18, 152, grp_0}, /* ACH 0 */
+ {18, 152, grp_0}, /* ACH 1 */
+ {18, 152, grp_0}, /* ACH 2 */
+ {18, 152, grp_0}, /* ACH 3 */
+ {0, 0, grp_0}, /* ACH 4 */
+ {0, 0, grp_0}, /* ACH 5 */
+ {0, 0, grp_0}, /* ACH 6 */
+ {0, 0, grp_0}, /* ACH 7 */
+ {18, 152, grp_0}, /* B0MGQ */
+ {18, 152, grp_0}, /* B0HIQ */
+ {0, 0, grp_0}, /* B1MGQ */
+ {0, 0, grp_0}, /* B1HIQ */
+ {0, 0, 0} /* FWCMDQ */
+};
+
+static const struct rtw89_hfc_pub_cfg rtw8851b_hfc_pubcfg_usb = {
+ 152, /* Group 0 */
+ 0, /* Group 1 */
+ 152, /* Public Max */
+ 0 /* WP threshold */
+};
+
+static const struct rtw89_hfc_prec_cfg rtw8851b_hfc_preccfg_usb = {
+ 9, /* CH 0-11 pre-cost */
+ 32, /* H2C pre-cost */
+ 64, /* WP CH 0-7 pre-cost */
+ 24, /* WP CH 8-11 pre-cost */
+ 1, /* CH 0-11 full condition */
+ 1, /* H2C full condition */
+ 1, /* WP CH 0-7 full condition */
+ 1, /* WP CH 8-11 full condition */
+};
+
+static const struct rtw89_hfc_param_ini rtw8851b_hfc_param_ini_usb[] = {
+ [RTW89_QTA_SCC] = {rtw8851b_hfc_chcfg_usb, &rtw8851b_hfc_pubcfg_usb,
+ &rtw8851b_hfc_preccfg_usb, RTW89_HCIFC_STF},
+ [RTW89_QTA_DLFW] = {NULL, NULL,
+ &rtw8851b_hfc_preccfg_usb, RTW89_HCIFC_STF},
+ [RTW89_QTA_INVALID] = {NULL},
+};
+
static const struct rtw89_dle_mem rtw8851b_dle_mem_pcie[] = {
[RTW89_QTA_SCC] = {RTW89_QTA_SCC, &rtw89_mac_size.wde_size6,
&rtw89_mac_size.ple_size6, &rtw89_mac_size.wde_qt6,
@@ -2491,7 +2533,9 @@ const struct rtw89_chip_info rtw8851b_chip_info = {
.max_amsdu_limit = 3500,
.dis_2g_40m_ul_ofdma = true,
.rsvd_ple_ofst = 0x2f800,
- .hfc_param_ini = {rtw8851b_hfc_param_ini_pcie, NULL, NULL},
+ .hfc_param_ini = {rtw8851b_hfc_param_ini_pcie,
+ rtw8851b_hfc_param_ini_usb,
+ NULL},
.dle_mem = {rtw8851b_dle_mem_pcie,
rtw8851b_dle_mem_usb2,
rtw8851b_dle_mem_usb3,
--
2.49.0
next prev parent reply other threads:[~2025-06-20 18:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-20 18:51 [PATCH rtw-next v3 00/14] wifi: rtw89: Add support for USB devices Bitterblue Smith
2025-06-20 18:53 ` [PATCH rtw-next v3 01/14] wifi: rtw89: 8851b: Accept USB devices and load their MAC address Bitterblue Smith
2025-06-20 18:54 ` [PATCH rtw-next v3 02/14] wifi: rtw89: Make dle_mem in rtw89_chip_info an array Bitterblue Smith
2025-06-24 5:42 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 03/14] wifi: rtw89: Make hfc_param_ini " Bitterblue Smith
2025-06-24 5:45 ` Ping-Ke Shih
2025-06-20 18:56 ` [PATCH rtw-next v3 04/14] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3} Bitterblue Smith
2025-06-20 18:57 ` Bitterblue Smith [this message]
2025-06-20 18:58 ` [PATCH rtw-next v3 06/14] wifi: rtw89: Disable deep power saving for USB/SDIO Bitterblue Smith
2025-06-24 5:50 ` Ping-Ke Shih
2025-06-20 18:59 ` [PATCH rtw-next v3 07/14] wifi: rtw89: Add extra TX headroom for USB Bitterblue Smith
2025-06-20 19:00 ` [PATCH rtw-next v3 08/14] wifi: rtw89: Hide some errors when the device is unplugged Bitterblue Smith
2025-06-20 19:01 ` [PATCH rtw-next v3 09/14] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB Bitterblue Smith
2025-06-24 5:51 ` Ping-Ke Shih
2025-06-20 19:02 ` [PATCH rtw-next v3 10/14] wifi: rtw89: Fix rtw89_mac_power_switch() " Bitterblue Smith
2025-06-24 5:52 ` Ping-Ke Shih
2025-06-20 19:03 ` [PATCH rtw-next v3 11/14] wifi: rtw89: Add some definitions " Bitterblue Smith
2025-06-20 19:04 ` [PATCH rtw-next v3 12/14] wifi: rtw89: Add usb.{c,h} Bitterblue Smith
2025-06-23 20:08 ` Bitterblue Smith
2025-06-24 6:18 ` Ping-Ke Shih
2025-06-20 19:05 ` [PATCH rtw-next v3 13/14] wifi: rtw89: Add rtw8851bu.c Bitterblue Smith
2025-06-20 19:05 ` [PATCH rtw-next v3 14/14] wifi: rtw89: Enable the new USB modules Bitterblue Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d57c0958-2ca5-484d-88ff-0a7640488335@gmail.com \
--to=rtl8821cerfe2@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox