From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Subject: [PATCH rtw-next v3 05/11] wifi: rtw89: Fix rtw89_mac_dmac_func_pre_en_ax() for USB/SDIO
Date: Wed, 27 Aug 2025 19:52:04 +0300 [thread overview]
Message-ID: <ded9dfa8-b097-48d5-8cb2-1b4aff3d0d4c@gmail.com> (raw)
In-Reply-To: <fac0abab-2334-4ae2-9a80-f3fd7808e392@gmail.com>
Set the DMA mode according to the interface type.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- No change, messed up sending v1.
v3:
- Add Acked-by.
---
drivers/net/wireless/realtek/rtw89/mac.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 06fc113ffaf0..6c2de561ddcc 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -3980,8 +3980,15 @@ static void rtw89_mac_dmac_func_pre_en_ax(struct rtw89_dev *rtwdev)
val = rtw89_read32(rtwdev, R_AX_HAXI_INIT_CFG1);
val &= ~(B_AX_DMA_MODE_MASK | B_AX_STOP_AXI_MST);
- val |= FIELD_PREP(B_AX_DMA_MODE_MASK, DMA_MOD_PCIE_1B) |
- B_AX_TXHCI_EN_V1 | B_AX_RXHCI_EN_V1;
+ val |= B_AX_TXHCI_EN_V1 | B_AX_RXHCI_EN_V1;
+
+ if (rtwdev->hci.type == RTW89_HCI_TYPE_PCIE)
+ val |= FIELD_PREP(B_AX_DMA_MODE_MASK, DMA_MOD_PCIE_1B);
+ else if (rtwdev->hci.type == RTW89_HCI_TYPE_USB)
+ val |= FIELD_PREP(B_AX_DMA_MODE_MASK, DMA_MOD_USB);
+ else
+ val |= FIELD_PREP(B_AX_DMA_MODE_MASK, DMA_MOD_SDIO);
+
rtw89_write32(rtwdev, R_AX_HAXI_INIT_CFG1, val);
rtw89_write32_clr(rtwdev, R_AX_HAXI_DMA_STOP1,
--
2.50.1
next prev parent reply other threads:[~2025-08-27 16:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 16:48 [PATCH rtw-next v3 00/11] wifi: rtw89: Add support for RTL8852CU Bitterblue Smith
2025-08-27 16:48 ` [PATCH rtw-next v3 01/11] wifi: rtw89: Add rtw89_core_get_ch_dma_v2() Bitterblue Smith
2025-08-29 6:08 ` Ping-Ke Shih
2025-08-27 16:49 ` [PATCH rtw-next v3 02/11] wifi: rtw89: usb: Move bulk out map to new struct rtw89_usb_info Bitterblue Smith
2025-08-29 6:13 ` Ping-Ke Shih
2025-08-27 16:50 ` [PATCH rtw-next v3 03/11] wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_pre_init() for RTL8852CU Bitterblue Smith
2025-08-29 6:16 ` Ping-Ke Shih
2025-08-27 16:51 ` [PATCH rtw-next v3 04/11] wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_post_init() " Bitterblue Smith
2025-08-29 6:17 ` Ping-Ke Shih
2025-08-27 16:52 ` Bitterblue Smith [this message]
2025-08-27 16:52 ` [PATCH rtw-next v3 06/11] wifi: rtw89: 8852c: Fix rtw8852c_pwr_{on,off}_func() for USB Bitterblue Smith
2025-08-27 16:54 ` [PATCH rtw-next v3 07/11] wifi: rtw89: Add rtw8852c_dle_mem_usb{2,3} Bitterblue Smith
2025-08-27 16:55 ` [PATCH rtw-next v3 08/11] wifi: rtw89: Add rtw8852c_hfc_param_ini_usb Bitterblue Smith
2025-08-27 16:56 ` [PATCH rtw-next v3 09/11] wifi: rtw89: 8852c: Accept USB devices and load their MAC address Bitterblue Smith
2025-08-27 16:57 ` [PATCH rtw-next v3 10/11] wifi: rtw89: Add rtw8852cu.c Bitterblue Smith
2025-08-27 16:58 ` [PATCH rtw-next v3 11/11] wifi: rtw89: Enable the new rtw89_8852cu module Bitterblue Smith
2025-08-29 6:23 ` [PATCH rtw-next v3 00/11] wifi: rtw89: Add support for RTL8852CU Ping-Ke Shih
2025-08-29 21:46 ` Bitterblue Smith
2025-09-01 2:09 ` Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ded9dfa8-b097-48d5-8cb2-1b4aff3d0d4c@gmail.com \
--to=rtl8821cerfe2@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).