From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Subject: [PATCH v3 4/8] wifi: rtw88: Fix rtw_init_vht_cap() for RTL8814AU
Date: Tue, 18 Feb 2025 01:30:48 +0200 [thread overview]
Message-ID: <e86aa009-b5bf-4b3a-8112-ea5e3cd49465@gmail.com> (raw)
In-Reply-To: <3908a496-d687-40fb-a1af-6add5c7e1dd4@gmail.com>
Set the MCS maps and the highest rates according to the number of
spatial streams the chip has. For RTL8814AU that is 3.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
- Add Acked-by.
v3:
- No change.
---
drivers/net/wireless/realtek/rtw88/main.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 3319bb5044c3..959f56a3cc1a 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1596,8 +1596,9 @@ static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
struct ieee80211_sta_vht_cap *vht_cap)
{
struct rtw_efuse *efuse = &rtwdev->efuse;
- u16 mcs_map;
+ u16 mcs_map = 0;
__le16 highest;
+ int i;
if (efuse->hw_cap.ptcl != EFUSE_HW_CAP_IGNORE &&
efuse->hw_cap.ptcl != EFUSE_HW_CAP_PTCL_VHT)
@@ -1620,21 +1621,15 @@ static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
if (rtw_chip_has_rx_ldpc(rtwdev))
vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC;
- mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 4 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
- IEEE80211_VHT_MCS_NOT_SUPPORTED << 14;
- if (efuse->hw_cap.nss > 1) {
- highest = cpu_to_le16(780);
- mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << 2;
- } else {
- highest = cpu_to_le16(390);
- mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << 2;
+ for (i = 0; i < 8; i++) {
+ if (i < efuse->hw_cap.nss)
+ mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2);
+ else
+ mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
}
+ highest = cpu_to_le16(390 * efuse->hw_cap.nss);
+
vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
vht_cap->vht_mcs.rx_highest = highest;
--
2.48.1
next prev parent reply other threads:[~2025-02-17 23:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 23:27 [PATCH v3 0/8] wifi: rtw88: Prepare to support RTL8814AU (part 2/2) Bitterblue Smith
2025-02-17 23:28 ` [PATCH v3 1/8] wifi: rtw88: Fix rtw_mac_power_switch() for RTL8814AU Bitterblue Smith
2025-02-21 2:11 ` Ping-Ke Shih
2025-02-17 23:29 ` [PATCH v3 2/8] wifi: rtw88: Fix rtw_desc_to_mcsrate() to handle MCS16-31 Bitterblue Smith
2025-02-18 0:12 ` Ping-Ke Shih
2025-02-17 23:30 ` [PATCH v3 3/8] wifi: rtw88: Fix rtw_init_ht_cap() for RTL8814AU Bitterblue Smith
2025-02-17 23:30 ` Bitterblue Smith [this message]
2025-02-17 23:31 ` [PATCH v3 5/8] wifi: rtw88: Fix rtw_rx_phy_stat() " Bitterblue Smith
2025-02-17 23:31 ` [PATCH v3 6/8] wifi: rtw88: Extend rtw_phy_config_swing_table() " Bitterblue Smith
2025-02-17 23:32 ` [PATCH v3 7/8] wifi: rtw88: Extend rtw_debugfs_get_phy_info() " Bitterblue Smith
2025-02-17 23:32 ` [PATCH v3 8/8] wifi: rtw88: Extend rtw_debugfs_get_tx_pwr_tbl() " Bitterblue Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e86aa009-b5bf-4b3a-8112-ea5e3cd49465@gmail.com \
--to=rtl8821cerfe2@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).