From: "Zack Weinberg" <zackw@panix.com>
To: linux-wireless@vger.kernel.org
Subject: Getting ath5k driver working with Thinkpad T61 [168c:1014]
Date: Wed, 14 May 2008 13:24:07 -0400 [thread overview]
Message-ID: <eb97335b0805141024w6afa864j860b312b072faa8a@mail.gmail.com> (raw)
I have a shiny new Thinkpad T61 and I'd like to get its wireless
chipset working with the ath5k driver. I have tried
compat-wireless-2008-05-07 on top of kernel 2.6.25.1 -- I get this in
dmesg:
# modprobe ath5k
[15497.699573] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[15497.699607] PCI: Setting latency timer of device 0000:03:00.0 to 64
[15497.699665] ath5k_pci 0000:03:00.0: registered as 'phy0'
[15498.709122] ath5k phy0: failed to wakeup the MAC Chip
[15498.709195] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[15498.709205] ath5k_pci: probe of 0000:03:00.0 failed with error -5
# lspci -vnn -s 0000:03:00.0
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212
802.11abg NIC [168c:1014] (rev 01)
Subsystem: IBM Device [1014:058a]
Flags: fast devsel, IRQ 17
Memory at df3f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5k
ath_info does not work:
# ath_info df3f0000
Unable to read EEPROM Magic value!
The old madwifi drivers don't work with this chip either:
# modprobe ath_pci
[ 392.367300] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
[ 392.379623] wlan: 0.9.4
[ 392.381431] ath_pci: 0.9.4
[ 392.381466] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 392.381472] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 392.381488] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 392.385856] wifi%d: unable to attach hardware: 'Hardware didn't
respond as expected' (HAL status 3)
[ 392.385870] ACPI: PCI interrupt for device 0000:03:00.0 disabled
What can I do to help make this chip work in the near future?
zw
next reply other threads:[~2008-05-14 17:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-14 17:24 Zack Weinberg [this message]
2008-05-14 18:38 ` Getting ath5k driver working with Thinkpad T61 [168c:1014] Bob Copeland
2008-05-14 18:45 ` Zack Weinberg
2008-05-14 19:09 ` Bob Copeland
2008-05-15 14:41 ` Zack Weinberg
2008-05-15 16:45 ` Bob Copeland
2008-05-15 16:53 ` Zack Weinberg
2008-05-15 20:44 ` Bob Copeland
2008-05-15 19:44 ` Nick Kossifidis
2008-05-15 19:53 ` Zack Weinberg
2008-05-16 0:50 ` Nick Kossifidis
2008-06-03 21:45 ` Zack Weinberg
2008-06-05 21:50 ` Bob Copeland
-- strict thread matches above, loose matches on Subject: below --
2008-06-16 15:24 Bob Copeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eb97335b0805141024w6afa864j860b312b072faa8a@mail.gmail.com \
--to=zackw@panix.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox