From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from main.gmane.org ([80.91.229.2]:34592 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751257AbYJSNAE (ORCPT ); Sun, 19 Oct 2008 09:00:04 -0400 Received: from root by ciao.gmane.org with local (Exim 4.43) id 1KrXt4-0007U1-Qo for linux-wireless@vger.kernel.org; Sun, 19 Oct 2008 13:00:02 +0000 Received: from 81.214.144.189 ([81.214.144.189]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 19 Oct 2008 13:00:02 +0000 Received: from kormetin by 81.214.144.189 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 19 Oct 2008 13:00:02 +0000 To: linux-wireless@vger.kernel.org From: metin Subject: Re: B43 randomly and silently dropping connections... Date: Sun, 19 Oct 2008 15:53:27 +0300 Message-ID: (sfid-20081019_150018_716257_A403AF86) References: <200810161959.43084.mcbrides9@comcast.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed In-Reply-To: <200810161959.43084.mcbrides9@comcast.net> Sender: linux-wireless-owner@vger.kernel.org List-ID: Yes I can confirm this problem. I have bcm4318 card and my connection frequently and unexpectidely is dropping with b43 (I had no problem with bcm43xx module). It did not differ at all which firmware I used. dmesg gives: b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10) Registered led device: b43-phy1::tx Registered led device: b43-phy1::rx Registered led device: b43-phy1::radio ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) input: b43-phy1 as /devices/virtual/input/input10 b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10) Registered led device: b43-phy1::tx Registered led device: b43-phy1::rx Registered led device: b43-phy1::radio ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:73:05:10:a0:84 wlan0: authenticated wlan0: associate with AP 00:73:05:10:a0:84 wlan0: RX AssocResp from 00:73:05:10:a0:84 (capab=0x471 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present ... wlan0: No ProbeResp from current AP 00:73:05:10:a0:84 - assume out of range wlan0: authenticate with AP 00:73:05:10:a0:84 wlan0: authenticate with AP 00:73:05:10:a0:84 wlan0: authenticate with AP 00:73:05:10:a0:84 wlan0: authenticate with AP 00:73:05:10:a0:84 wlan0: authentication with AP 00:73:05:10:a0:84 timed out Please help...