linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Does ACPIPHP work on my Machine
@ 2009-01-17 23:20 feldmaus
  2009-01-17 23:31 ` feldmaus
  2009-02-17  0:09 ` Markus Feldmann
  0 siblings, 2 replies; 3+ messages in thread
From: feldmaus @ 2009-01-17 23:20 UTC (permalink / raw)
  To: linux-wireless

Hi Matthew Garrett,

so i went home to read what you want from me to test.
The Directory </sys/bus/pci/slots/> is empty.
Si there something else i can test ?

I give you some more Information.
wes-nic:/sys/bus/pci/slots# lspci -d 14e4:4301 -vv
02:02.0 Network controller: Broadcom Corporation BCM4303 802.11b 
Wireless LAN Controller (rev 02)
	Subsystem: Hewlett-Packard Company Device 12f3
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- 
<MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at e0104000 (32-bit, non-prefetchable) [size=8K]
	Kernel driver in use: b43-pci-bridge
	Kernel modules: ssb


Regards Markus


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Does ACPIPHP work on my Machine
  2009-01-17 23:20 Does ACPIPHP work on my Machine feldmaus
@ 2009-01-17 23:31 ` feldmaus
  2009-02-17  0:09 ` Markus Feldmann
  1 sibling, 0 replies; 3+ messages in thread
From: feldmaus @ 2009-01-17 23:31 UTC (permalink / raw)
  To: linux-wireless

Maybe this is also interesting for you,

wes-nic:/sys/bus/pci/slots# lspci -vt
-[0000:00]-+-00.0  nVidia Corporation nForce3 Host Bridge
            +-01.0  nVidia Corporation nForce3 LPC Bridge
            +-01.1  nVidia Corporation nForce3 SMBus
            +-02.0  nVidia Corporation nForce3 USB 1.1
            +-02.1  nVidia Corporation nForce3 USB 1.1
            +-02.2  nVidia Corporation nForce3 USB 2.0
            +-06.0  nVidia Corporation nForce3 Audio
            +-06.1  nVidia Corporation nForce3 Audio
            +-08.0  nVidia Corporation nForce3 IDE
            +-0a.0-[0000:02-0a]--+-00.0  Texas Instruments TSB43AB21 
IEEE-1394a-2000 Controller (PHY/Link)
            |                    +-01.0  Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+
            |                    +-02.0  Broadcom Corporation BCM4303 
802.11b Wireless LAN Controller
            |                    +-04.0  Texas Instruments PCI1620 PC 
Card Controller
            |                    +-04.1  Texas Instruments PCI1620 PC 
Card Controller
            |                    \-04.2  Texas Instruments PCI1620 
Firmware Loading Function
            +-0b.0-[0000:01]----00.0  nVidia Corporation NV17 [GeForce4 
440 Go 64M]
            +-18.0  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
            +-18.1  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
            +-18.2  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller
            \-18.3  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control

Regards Markus


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Does ACPIPHP work on my Machine
  2009-01-17 23:20 Does ACPIPHP work on my Machine feldmaus
  2009-01-17 23:31 ` feldmaus
@ 2009-02-17  0:09 ` Markus Feldmann
  1 sibling, 0 replies; 3+ messages in thread
From: Markus Feldmann @ 2009-02-17  0:09 UTC (permalink / raw)
  To: linux-wireless

I tried the newest Kernel <2.6.29.4> and it doean't work at all.
The same Problem with the rfkill Button. I can't activate my
wlan card without a functional ACPIPHP i think.
So i hope Matthew Garrett or something else will hear my
shout for help. :-)

In some days i have birthday and i wish me ... :-)

Regards Markus


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2009-02-17  0:10 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-17 23:20 Does ACPIPHP work on my Machine feldmaus
2009-01-17 23:31 ` feldmaus
2009-02-17  0:09 ` Markus Feldmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).