Re: zd1211rw couldn't load firmware. Error number -145 with Kernel 2.6.30

[Mladen Horvat <acid-burn@opendreambox.org>]

Holger Schurig <hs4233@...> writes:

> 
> > [  415.271000] usb 1-1: upload_firmware() 
> > firmware device id 0x4810 is equal to the actual device id
> 
> Looks like your firmware could be successfully loaded and checked 
> by the driver.
> 
> > [  416.350000] usb 1-1: USB control request for firmware
> > upload failed. Error number -145
> 
> Looks like an URB (USB request block) couldn't transferred to the 
> device. As you speak about an embedded device: are you sure that 
> your USB hardware works correctly?
> 


Hello Holger,

thanks for your fast answer.

I hope to be sure that the usb hardware works correctly.
As i said, the same stb only booted with a rt73usb wlan stick attached has no
problems with the firmware upload and also wpa-supplicant connection and
everything works on wlan0.  only problem are these two zd1211b usb sticks in the
zd1211rw driver.

the same stb running a kernel 2.6.12 and the original vendor driver 2.22.00
works without problems..

so i think i can exclude a hardware bug on the usb/stb side.

Hope this helps. 
If any other logs are needed i will provide them.


Regards

Mladen