From: "amit.gemini@sasken.com" <amit.gemini@sasken.com>
To: linux-wireless@vger.kernel.org
Subject: Problem bringing up wlan0 interface up with mainline wl1271 drivers on Panda Board with 2.6.39 Kernel
Date: Wed, 10 Aug 2011 11:38:20 +0000 (UTC) [thread overview]
Message-ID: <loom.20110810T133554-589@post.gmane.org> (raw)
I am using Panda Board with 2.6.39 Kernel
when ever i insert the driver , error comes out "wl1271: ERROR could not get nvs
file: -2"
as you can see from the logs...
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/wireless/cfg80211.ko
[ 18.853088] cfg80211: Calling CRDA to update world regulatory domain
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/mac80211/mac80211.ko
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx
/wl12xx.ko
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx
/wl12xx_sdio.ko
[ 112.121643] wl1271: ERROR could not get nvs file: -2
[ 112.137634] wl1271_sdio mmc1:0001:2: wlan0: Features changed: 0x00004800 ->
0x00004000
[ 112.148712] wl1271: loaded
[ 112.151550] wl1271: initialized
/ # ifconfig -a
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/ # ifconfig wlan0 hw ether 00:22:33:44:55:66
/ # ifconfig wlan0 hw ether 00:22:33:44:55:D1
/ # ifconfig -a
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:22:33:44:55:D1
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/ # ifconfig wlan0 down
/ # ifconfig wlan0 up
[ 427.125793] wl1271: ERROR could not get firmware: -2
[ 488.123046] wl1271: ERROR could not get firmware: -2
next reply other threads:[~2011-08-10 11:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-10 11:38 amit.gemini [this message]
2011-08-10 11:59 ` Problem bringing up wlan0 interface up with mainline wl1271 drivers on Panda Board with 2.6.39 Kernel Arik Nemtsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20110810T133554-589@post.gmane.org \
--to=amit.gemini@sasken.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox