From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from plane.gmane.org ([80.91.229.3]:36551 "EHLO plane.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932884Ab3HNQzF (ORCPT ); Wed, 14 Aug 2013 12:55:05 -0400 Received: from list by plane.gmane.org with local (Exim 4.69) (envelope-from ) id 1V9eLf-0001d8-9C for linux-wireless@vger.kernel.org; Wed, 14 Aug 2013 18:55:03 +0200 Received: from 195.37.61.178 ([195.37.61.178]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 14 Aug 2013 18:55:03 +0200 Received: from moony by 195.37.61.178 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 14 Aug 2013 18:55:03 +0200 To: linux-wireless@vger.kernel.org From: moony Subject: Re: carl9170: Problems setting up Virtual Interface Date: Wed, 14 Aug 2013 09:32:57 +0000 (UTC) Message-ID: (sfid-20130814_185510_035617_33111E5C) References: <201107042202.27366.chunkeey@googlemail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-wireless-owner@vger.kernel.org List-ID: Alex writes: > > Great! I now get an additional interface: > wlan1-wlan0 Link encap:Ethernet HWaddr > BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Hi Alex, did you get this to work? I'm using the same driver and procedure, but when I try to bring up the second interface (with ifup wifi1), I get the error device or resource busy... The first always comes up. I don't know if vif is enabled by default on the kernelmodule. I tried to compile it by myself (there is an option for the number of vif, and the default is 1), but stuck on errors or missing dependencies, yet. Best regards, moony