* Problems with rtl8192cu driver (disassociated from ... (Reason: 2))
@ 2014-08-02 23:29 Manuel Reimer
2014-08-03 12:13 ` Steve Brown
0 siblings, 1 reply; 4+ messages in thread
From: Manuel Reimer @ 2014-08-02 23:29 UTC (permalink / raw)
To: linux-wireless
Hello,
I'm trying to get access to a WLAN access point using the following adapter:
<http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/wireless_adapters_n150/ew-7811un>
I've used "NetworkManager" to connect to the access point and everything
seemed to work well at first.
But after a few minutes the connection is lost with the following
message in dmesg:
wlan0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2)
If I restart NetworkManager, then the connection works again, but only
for a few minutes before I get another disconnect.
I even tried to do a permanent ping to a server on the Internet (to have
permanent traffic) but this doesn't change anything. I still get
disconnected with "Reason 2".
Are there known problems with the rtl8192cu driver?
Can someone here recommend a small USB WLAN adapter which is known to
work without problems?
Thank you very much in advance.
Greetings
Manuel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Problems with rtl8192cu driver (disassociated from ... (Reason: 2))
2014-08-02 23:29 Problems with rtl8192cu driver (disassociated from ... (Reason: 2)) Manuel Reimer
@ 2014-08-03 12:13 ` Steve Brown
2014-08-03 15:02 ` Manuel Reimer
0 siblings, 1 reply; 4+ messages in thread
From: Steve Brown @ 2014-08-03 12:13 UTC (permalink / raw)
To: Manuel Reimer; +Cc: linux-wireless
On Sun, 2014-08-03 at 01:29 +0200, Manuel Reimer wrote:
> Hello,
>
> I'm trying to get access to a WLAN access point using the following adapter:
>
> <http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/global/wireless_adapters_n150/ew-7811un>
>
> I've used "NetworkManager" to connect to the access point and everything
> seemed to work well at first.
>
> But after a few minutes the connection is lost with the following
> message in dmesg:
>
> wlan0: disassociated from XX:XX:XX:XX:XX:XX (Reason: 2)
>
> If I restart NetworkManager, then the connection works again, but only
> for a few minutes before I get another disconnect.
>
> I even tried to do a permanent ping to a server on the Internet (to have
> permanent traffic) but this doesn't change anything. I still get
> disconnected with "Reason 2".
>
> Are there known problems with the rtl8192cu driver?
>
> Can someone here recommend a small USB WLAN adapter which is known to
> work without problems?
>
> Thank you very much in advance.
>
> Greetings
>
> Manuel
>
I had a similar problem with this driver. After a while, the aggregation
session seems to hang. If I connect as b/g, no problem. If I disable
aggregation by patching the driver, again the problem goes away.
That's as far as I got.
Steve
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-08-03 15:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-02 23:29 Problems with rtl8192cu driver (disassociated from ... (Reason: 2)) Manuel Reimer
2014-08-03 12:13 ` Steve Brown
2014-08-03 15:02 ` Manuel Reimer
2014-08-03 15:21 ` Steve Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).