Linux wireless drivers development
 help / color / mirror / Atom feed

* unable to bring up iwlagn wireless after update from 2.6.29.6 to 2.6.31-rc3
From: Thomas Backlund @ 2009-07-14 22:15 UTC (permalink / raw)
  To: linux-wireless

[-- Attachment #1: Type: text/plain, Size: 1253 bytes --]

Hi,
(please cc me on replies)

before I start to try and figure this out, I thought of asking here if 
it rings any bells...

Distribution: Mandriva Cooker
Arch: x86_64.

NIC: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 
4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)

ucode version: 228.61.2.24

wpa_supplicant version: 0.6.9
crda version: 1.1.0
wireless-regdb version: 2009.04.17

Running a 2.6.29.6 based kernel works with iwlagn
Running a 2.6.30.1 based kernel works with iwlagn

Running a 2.6.31-rc3 based kernel gets me this:

--- cut ---
Bringing up interface wlan0:  RTNETLINK answers: Unknown error 132
RTNETLINK answers: Unknown error 132
Error for wireless request "Set Encode" (8B2A) :
     SET failed on device wlan0 ; Invalid argument.
SIOCSIFFLAGS: Unknown error 132
Could not set interface 'wlan0' UP
--- cut ---

Oh,
and this part:
--- cut ---
Error for wireless request "Set Encode" (8B2A) :
     SET failed on device wlan0 ; Invalid argument.
--- cut ---

I also see on 2.6.29.6, so I dont think it matters in this case...

So,
any pointers, or should I start bisecting ?

Attached is also my .config if you need it...
(using this config on vanilla 2.6.31-rc3 gives the same result)


--
Thomas

[-- Attachment #2: x86_64.config --]
[-- Type: text/plain, Size: 102341 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc3
# Tue Jul 14 11:05:06 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=16
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_CPU_DEBUG=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_BROKEN_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_PSD=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_IFWLOG=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_SET=m
CONFIG_IP_NF_SET_MAX=256
CONFIG_IP_NF_SET_HASHSIZE=1024
CONFIG_IP_NF_SET_IPMAP=m
CONFIG_IP_NF_SET_MACIPMAP=m
CONFIG_IP_NF_SET_PORTMAP=m
CONFIG_IP_NF_SET_IPHASH=m
CONFIG_IP_NF_SET_NETHASH=m
CONFIG_IP_NF_SET_IPPORTHASH=m
CONFIG_IP_NF_SET_IPPORTIPHASH=m
CONFIG_IP_NF_SET_IPPORTNETHASH=m
CONFIG_IP_NF_SET_IPTREE=m
CONFIG_IP_NF_SET_IPTREEMAP=m
CONFIG_IP_NF_SET_SETLIST=m
CONFIG_IP_NF_MATCH_SET=m
CONFIG_IP_NF_TARGET_SET=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_DEV=m
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_KVASER_PCI=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_DEFAULT_PS=y
CONFIG_MAC80211_DEFAULT_PS_VALUE=1

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_ONENAND_SIM is not set

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_DELL_LAPTOP=m
CONFIG_ISL29003=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=m
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_RAID45=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ETHOC=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=m
CONFIG_KS8842=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_VLAN is not set
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_MDIO=m
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
# CONFIG_MLX4_DEBUG is not set
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_QLGE=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_BE2NET=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
CONFIG_P54_LEDS=y
CONFIG_ATH_COMMON=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
CONFIG_AR9170_USB=m
CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_HT=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_WL12XX=m
CONFIG_IWM=m
# CONFIG_IWM_DEBUG is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
# CONFIG_IPPP_FILTER is not set
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
# CONFIG_ISDN_X25 is not set

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
# CONFIG_ISDN_DRV_AVMB1_B1PCIV4 is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_W90X900=m
CONFIG_INPUT_LIRC=y
CONFIG_LIRC_DEV=m
CONFIG_LIRC_BT829=m
# CONFIG_LIRC_I2C is not set
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_IT87=m
CONFIG_LIRC_ITE8709=m
CONFIG_LIRC_MCEUSB=m
CONFIG_LIRC_MCEUSB2=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_STREAMZAP=m
CONFIG_LIRC_TTUSBIR=m
# CONFIG_LIRC_ZILOG is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_NOZOMI=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_WM8350_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_MAX17040=m
CONFIG_CHARGER_PCF50633=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
CONFIG_UCB1400_CORE=m
CONFIG_TPS65010=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM8350=m
CONFIG_MFD_WM8350_I2C=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_AB3100_CORE=m
CONFIG_EZX_PCAP=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_LP3971=m
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
# CONFIG_VIDEO_SAA5249 is not set
CONFIG_VIDEO_STRADIS=m
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
CONFIG_USB_STV06XX=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_USB_MR800=m
CONFIG_RADIO_TEA5764=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set
CONFIG_DVB_SIANO_SMS1XXX=m
CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_IEEE1394=y
CONFIG_DVB_FIREDTV_INPUT=y

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TTM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_KMS=y
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
CONFIG_BACKLIGHT_SAHARA=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_BT_SCO=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VT1732=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
# CONFIG_SOUND_YM3812 is not set
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_GADGET_MUSB_HDRC is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=m
CONFIG_UWB_I1480U=m
CONFIG_UWB_I1480U_WLP=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_BD2802=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m

#
# TI VLYNQ
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
CONFIG_SLICOSS=m
CONFIG_SXG=m
CONFIG_ME4000=m
CONFIG_MEILHAUS=m
CONFIG_ME0600=m
CONFIG_ME0900=m
CONFIG_ME1000=m
CONFIG_ME1400=m
CONFIG_ME1600=m
CONFIG_ME4600=m
CONFIG_ME6000=m
CONFIG_ME8100=m
CONFIG_ME8200=m
CONFIG_MEDUMMY=m
# CONFIG_VIDEO_GO7007 is not set
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_USB_ATMEL=m
CONFIG_POCH=m
CONFIG_AGNX=m
CONFIG_OTUS=m
CONFIG_RT2860=m
CONFIG_RT2870=m
CONFIG_RT3070=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_ALTERA_PCIE_CHDMA=m
CONFIG_RTL8187SE=m
CONFIG_RTL8192SU=m
CONFIG_INPUT_MIMIO=m
CONFIG_TRANZPORT=m
CONFIG_EPL=m

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DST=m
# CONFIG_DST_DEBUG is not set
CONFIG_POHMELFS=m
# CONFIG_POHMELFS_DEBUG is not set
CONFIG_POHMELFS_CRYPTO=y
# CONFIG_STLC45XX is not set
CONFIG_USB_SERIAL_ATEN2011=m
CONFIG_B3DFG=m
CONFIG_IDE_PHISON=m
CONFIG_PLAN9AUTH=m
CONFIG_HECI=m
CONFIG_LINE6_USB=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_USB_SERIAL_QUATECH2=m
# CONFIG_VT6655 is not set
CONFIG_USB_CPC=m
CONFIG_RDC_17F3101X=m
CONFIG_FB_UDL=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ACPI_WMI=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_OCFS2_FS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NILFS2_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_FPU=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y

#
# Unofficial 3rd party kernel additions
#
CONFIG_NDISWRAPPER=m
CONFIG_VIAHSS=m
# CONFIG_ACERHK is not set
CONFIG_FSC_BTNS=m
CONFIG_DRBD=m
# CONFIG_DRBD_TRACE is not set

^ permalink raw reply

* Generic events for wake up from S1-S4
From: Luis R. Rodriguez @ 2009-07-14 22:11 UTC (permalink / raw)
  To: linux-kernel
  Cc: Johannes Berg, John W. Linville, Jouni Malinen, linux-wireless,
	Stephen Chen

I'm working on Wake-on-Wireless support for wireless right now [1].
Upon wake up I wanted to inform the kernel of the event which caused
the wake up but am not clear if there is a generic API for this. Mind
you, for WoW we'll need at least some AC power to the card so we'll
need to at least be in S3-Hot so we'll only need events for that for
now.

Do we have some generic infrastructure to gather reasons for wake up
from S1-S4 and pass this to userspace yet?

[1] http://wireless.kernel.org/en/users/Documentation/WoW

  Luis

^ permalink raw reply

* Re: [PATCH] iwlwifi: make some logging functions static/unexport
From: reinette chatre @ 2009-07-14 21:54 UTC (permalink / raw)
  To: Johannes Berg; +Cc: John Linville, linux-wireless
In-Reply-To: <1247579291.7178.9.camel@johannes.local>

On Tue, 2009-07-14 at 06:48 -0700, Johannes Berg wrote:
> iwl_dump_nic_error_log can be static and iwl_dump_nic_event_log
> doesn't need to be exported.
> 
> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
> ---

Acked-by: Reinette Chatre <reinette.chatre@intel.com>

Thank you

Reinette



^ permalink raw reply

* [PATCH] rtl8187: Fix for kernel oops when unloading with LEDs enabled
From: Larry Finger @ 2009-07-14 20:55 UTC (permalink / raw)
  To: John W Linville; +Cc: Herton Ronaldo Krzesinski, Hin-Tak Leung, linux-wireless

When rtl8187 is unloaded and CONFIG_RTL8187_LEDS is set, the kernel
may oops when the module is unloaded as the workqueue for led_on was
not being cancelled.

This patch fixes the problem reported in
http://marc.info/?l=linux-wireless&m=124742957615781&w=2.

Reported-by: Gábor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger>
---

V2 - Do not create a new workqueue.

John,

This patch is 2.6.31 material. To the best of my knowledge, a formal bug
report was never filed; however, it was reported in the reference given above.

Larry
---

Index: wireless-testing/drivers/net/wireless/rtl818x/rtl8187_leds.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ wireless-testing/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -208,11 +208,12 @@ void rtl8187_leds_exit(struct ieee80211_
 {
 	struct rtl8187_priv *priv = dev->priv;
 
-	rtl8187_unregister_led(&priv->led_tx);
 	/* turn the LED off before exiting */
 	queue_delayed_work(dev->workqueue, &priv->led_off, 0);
 	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
 	rtl8187_unregister_led(&priv->led_rx);
+	rtl8187_unregister_led(&priv->led_tx);
 }
 #endif /* def CONFIG_RTL8187_LED */
 

^ permalink raw reply

* [PATCH v2] wireless: wl12xx, fix lock imbalance
From: Jiri Slaby @ 2009-07-14 20:37 UTC (permalink / raw)
  To: linville; +Cc: luciano.coelho, linux-wireless, linux-kernel, Jiri Slaby

Add omitted mutex_unlock to one of wl12xx_op_start fail paths (when
wl12xx_chip_wakeup fails).

[v2]
Power off the device, because:
\= cite from http://marc.info/?l=linux-kernel&m=124755028209880&w=2
If the chip cannot be booted, why should it remain powered on?
In some rare cases, the chip might fail to initialize, but can
recover if powered off and on again, so turning it off at this
point is the right thing to do. =/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
---
 drivers/net/wireless/wl12xx/main.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 603d611..d30683c 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -336,7 +336,7 @@ static int wl12xx_op_start(struct ieee80211_hw *hw)
 
 	ret = wl12xx_chip_wakeup(wl);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	ret = wl->chip.op_boot(wl);
 	if (ret < 0)
-- 
1.6.3.2


^ permalink raw reply related

* Re: RT61 antenna diversity in 2.6.30
From: Ivo van Doorn @ 2009-07-14 19:44 UTC (permalink / raw)
  To: Lars Ericsson; +Cc: linux-wireless, users
In-Reply-To: <0DC66442F4FF4076964868A5ECAB9790@gotws1589>

On Monday 13 July 2009, Lars Ericsson wrote:
> Hi Ivo,
> 
> I recently moved from 2.6.26 to 2.6.30 with a HW that do 
> SW antenna diversity with .26 but not with .30
> 
> I have found two problems:
> 1) The rt2x00mac_config() calls rt2x00lib_config_antenna() and reset the
> rt2x00dev->default_ant.

Where is this reset of default_ant occuring?
There is only 1 write action in that function and that is altering the
rt2x00dev->link.ant.active field.

> 2) The rt2x00lib_antenna_diversity_sample() does not update the sampled
> antenna rssi.

And why should that be done?

> I have applied the following patches to correct the problems:
> 
> 1)
> --- a/drivers/net/wireless/rt2x00/rt2x00link.c	2009-07-13
> 21:48:45.000000000 +0200
> +++ b/drivers/net/wireless/rt2x00/rt2x00link.c	2009-07-13
> 21:52:42.000000000 +0200
> @@ -146,8 +151,13 @@ static void rt2x00lib_antenna_diversity_
>  {
>  	struct link_ant *ant = &rt2x00dev->link.ant;
>  	struct antenna_setup new_ant;
> -	int sample_a = rt2x00link_antenna_get_rssi_history(rt2x00dev,
> ANTENNA_A);
> -	int sample_b = rt2x00link_antenna_get_rssi_history(rt2x00dev,
> ANTENNA_B);
> +	int rssi_curr, sample_a, sample_b;
> +			
> +	rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev);
> +	rt2x00link_antenna_update_rssi_rx_history(rt2x00dev, rssi_curr);
> +	
> +	sample_a = rt2x00link_antenna_get_rssi_history(rt2x00dev,
> ANTENNA_A);
> +	sample_b = rt2x00link_antenna_get_rssi_history(rt2x00dev,
> ANTENNA_B);
>  
>  	memcpy(&new_ant, &ant->active, sizeof(new_ant));
> ---
> 
> 2)
> --- a/drivers/net/wireless/rt2x00/rt2x00mac.c	2009-07-13
> 21:51:26.000000000 +0200
> +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c	2009-07-13
> 21:54:28.000000000 +0200
> @@ -375,10 +375,12 @@ int rt2x00mac_config(struct ieee80211_hw
>  		 * diversity. But for non-diversity configurations, we need
>  		 * to have configured the correct state now.
>  		 */
> -		if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED)
> +		if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
> +			rt2x00dev->link.ant.active = rt2x00dev->default_ant;

This is done in rt2x00lib_config_antenna where it should.

>  			rt2x00lib_config_antenna(rt2x00dev,
> -						 &rt2x00dev->default_ant);
> +
> &rt2x00dev->link.ant.active);

This is very bad, since calling rt2x00lib_config_antenna() to set it to
the active configuration should always result in nothing being done.
Your hack by reseting the active field will cause it to do something,
but it looks extremely hackish.

^ permalink raw reply

* Re: [ath9k-devel] [PATCH] ath9k: Fix enabling OFDM weak signal detection
From: Luis R. Rodriguez @ 2009-07-14 18:11 UTC (permalink / raw)
  To: Luis R. Rodriguez
  Cc: Vasanth Thiagarajan, linux-wireless@vger.kernel.org,
	John W. Linville, Steven Luo, Senthilkumar Balasubramanian,
	ath9k-devel@lists.ath9k.org, Bennyam Malavazi, Jouni Malinen,
	Vasanth@venema.h4ckr.net
In-Reply-To: <20090714180348.GD25788@mosca>

On Tue, Jul 14, 2009 at 11:03:48AM -0700, Luis Rodriguez wrote:
> On Fri, Jul 10, 2009 at 11:02:58AM -0700, Luis R. Rodriguez wrote:
> > On Thu, Jul 9, 2009 at 2:12 PM, Steven Luo<steven@steven676.net> wrote:
> > > From: Steven Luo <steven@steven676.net>
> > >
> > > It seems that OFDM weak signal detection should be enabled after an ANI
> > > state reset, as indicated by the initial setting of ofdmWeakSigDetectOff
> > > and what the open Atheros HAL does.  Unfortunately, the reversed sense
> > > of ofdmWeakSigDetectOff (true if weak signal detection is NOT enabled)
> > > seems to have resulted in a mixup here, causing weak signal detection to
> > > be disabled.
> > >
> > > This patch significantly improves reception and throughput from distant
> > > stations for my AR5416-based AP running compat-wireless 2009-06-25.
> > >
> > > Signed-off-by: Steven Luo <steven@steven676.net>
> > > Cc: stable@kernel.org
> > > ---
> >
> > NACK for now, please give us a chance to review this -- this may
> > actually be correct.
> 
> Please try this patch instead, I've only compile tested this.

Now without the double AP check :)

From: Luis R. Rodriguez <lrodriguez@atheros.com>
Subject: [PATCH] ath9k: Tune ANI function processing on AP mode during ANI reset

For AP mode we must tune ANI specially for 2 GHz and
for 5 GHz. We mask in only the flags we want to toggle
on ath9k_hw_ani_control() through the ah->ani_function
bitmask, this will take care of ignoring changes during
ANI reset which we were disabling before.

Reported-by: Steven Luo <steven@steven676.net>
Cc: Bennyam Malavazi <Bennyam.Malavazi@Atheros.com
Cc: Jouni Malinen <Jouni.Malinen@Atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath/ath9k/ani.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,18 @@ void ath9k_ani_reset(struct ath_hw *ah)
 			"Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
+		if (ah->opmode == NL80211_IFTYPE_AP) {
+			/*
+			 * ath9k_hw_ani_control() will only process items set on
+			 * ah->ani_function
+			 */
+			if (IS_CHAN_2GHZ(chan))
+				ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+						    ATH9K_ANI_FIRSTEP_LEVEL);
+			else
+				ah->ani_function = 0;
+		}
+
 		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
-- 
1.6.3.3


^ permalink raw reply

* Re: [ath9k-devel] [PATCH] ath9k: Fix enabling OFDM weak signal detection
From: Luis R. Rodriguez @ 2009-07-14 18:03 UTC (permalink / raw)
  To: Luis R. Rodriguez
  Cc: Steven Luo, Bennyam Malavazi, linux-wireless@vger.kernel.org,
	John W. Linville, Jouni Malinen, Senthilkumar Balasubramanian,
	ath9k-devel@lists.ath9k.org, Vasanth Thiagarajan
In-Reply-To: <43e72e890907101102i29352c6bq9e511663e2c3a986@mail.gmail.com>

On Fri, Jul 10, 2009 at 11:02:58AM -0700, Luis R. Rodriguez wrote:
> On Thu, Jul 9, 2009 at 2:12 PM, Steven Luo<steven@steven676.net> wrote:
> > From: Steven Luo <steven@steven676.net>
> >
> > It seems that OFDM weak signal detection should be enabled after an ANI
> > state reset, as indicated by the initial setting of ofdmWeakSigDetectOff
> > and what the open Atheros HAL does.  Unfortunately, the reversed sense
> > of ofdmWeakSigDetectOff (true if weak signal detection is NOT enabled)
> > seems to have resulted in a mixup here, causing weak signal detection to
> > be disabled.
> >
> > This patch significantly improves reception and throughput from distant
> > stations for my AR5416-based AP running compat-wireless 2009-06-25.
> >
> > Signed-off-by: Steven Luo <steven@steven676.net>
> > Cc: stable@kernel.org
> > ---
> 
> NACK for now, please give us a chance to review this -- this may
> actually be correct.

Please try this patch instead, I've only compile tested this.

From: Luis R. Rodriguez <lrodriguez@atheros.com>
Subject: [PATCH] ath9k: Tune ANI function processing on AP mode during ANI reset

For AP mode we must tune ANI specially for 2 GHz and
for 5 GHz. We mask in only the flags we want to toggle
on ath9k_hw_ani_control() through the ah->ani_function
bitmask, this will take care of ignoring changes during
ANI reset which we were disabling before.

Reported-by: Steven Luo <steven@steven676.net>
Cc: Bennyam Malavazi <Bennyam.Malavazi@Atheros.com
Cc: Jouni Malinen <Jouni.Malinen@Atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
---
 drivers/net/wireless/ath/ath9k/ani.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,19 @@ void ath9k_ani_reset(struct ath_hw *ah)
 			"Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
+		if (ah->opmode == NL80211_IFTYPE_AP ||
+		    ah->opmode == NL80211_IFTYPE_AP) {
+			/*
+			 * ath9k_hw_ani_control() will only process items set on
+			 * ah->ani_function
+			 */
+			if (IS_CHAN_2GHZ(chan))
+				ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+						    ATH9K_ANI_FIRSTEP_LEVEL);
+			else
+				ah->ani_function = 0;
+		}
+
 		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
-- 
1.6.3.3


^ permalink raw reply

* Re: kernel .30 BROKE ATH5K with my AR5212 atheros.
From: Jasin Colegrove @ 2009-07-14 15:34 UTC (permalink / raw)
  To: Bob Copeland; +Cc: Luis R. Rodriguez, linux-wireless
In-Reply-To: <b6c5339f0907091144h39a3df67wa9327157dedb172@mail.gmail.com>

Just a quick update on this issue. I have come to the conclusion that
is indeed NOT a kernel driver issue. After removing the cruft and just
going the manual setup route for the complete bisect I was never once
able to repeat the behavior I had expirienced before. That was not
till i tried using wicd again. I have no reported this problem to the
appropriate bug tracker.

Sorry for wasting your precious time, I really do appreciate all your
responses and hard work!

^ permalink raw reply

* [PATCH] iwlwifi: make some logging functions static/unexport
From: Johannes Berg @ 2009-07-14 13:48 UTC (permalink / raw)
  To: John Linville; +Cc: Reinette Chatre, linux-wireless

iwl_dump_nic_error_log can be static and iwl_dump_nic_event_log
doesn't need to be exported.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
Good and easy janitors task would be to find all these possibilities,
I'm convinced there are many especially after seeing people export
functions that are linked into the same modules :)

 drivers/net/wireless/iwlwifi/iwl-core.c |  367 +++++++++++++++-----------------
 drivers/net/wireless/iwlwifi/iwl-core.h |    1 
 2 files changed, 182 insertions(+), 186 deletions(-)

--- wireless-testing.orig/drivers/net/wireless/iwlwifi/iwl-core.c	2009-07-14 15:43:09.000000000 +0200
+++ wireless-testing/drivers/net/wireless/iwlwifi/iwl-core.c	2009-07-14 15:43:13.000000000 +0200
@@ -1290,6 +1290,188 @@ static void iwl_print_rx_config_cmd(stru
 }
 #endif
 
+static const char *desc_lookup_text[] = {
+	"OK",
+	"FAIL",
+	"BAD_PARAM",
+	"BAD_CHECKSUM",
+	"NMI_INTERRUPT_WDG",
+	"SYSASSERT",
+	"FATAL_ERROR",
+	"BAD_COMMAND",
+	"HW_ERROR_TUNE_LOCK",
+	"HW_ERROR_TEMPERATURE",
+	"ILLEGAL_CHAN_FREQ",
+	"VCC_NOT_STABLE",
+	"FH_ERROR",
+	"NMI_INTERRUPT_HOST",
+	"NMI_INTERRUPT_ACTION_PT",
+	"NMI_INTERRUPT_UNKNOWN",
+	"UCODE_VERSION_MISMATCH",
+	"HW_ERROR_ABS_LOCK",
+	"HW_ERROR_CAL_LOCK_FAIL",
+	"NMI_INTERRUPT_INST_ACTION_PT",
+	"NMI_INTERRUPT_DATA_ACTION_PT",
+	"NMI_TRM_HW_ER",
+	"NMI_INTERRUPT_TRM",
+	"NMI_INTERRUPT_BREAK_POINT"
+	"DEBUG_0",
+	"DEBUG_1",
+	"DEBUG_2",
+	"DEBUG_3",
+	"UNKNOWN"
+};
+
+static const char *desc_lookup(int i)
+{
+	int max = ARRAY_SIZE(desc_lookup_text) - 1;
+
+	if (i < 0 || i > max)
+		i = max;
+
+	return desc_lookup_text[i];
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+	u32 data2, line;
+	u32 desc, time, count, base, data1;
+	u32 blink1, blink2, ilink1, ilink2;
+
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+
+	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+		return;
+	}
+
+	count = iwl_read_targ_mem(priv, base);
+
+	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+			priv->status, count);
+	}
+
+	desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+	blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
+	blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
+	ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
+	ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
+	data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
+	data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
+	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
+	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
+
+	IWL_ERR(priv, "Desc                               Time       "
+		"data1      data2      line\n");
+	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
+		desc_lookup(desc), desc, time, data1, data2, line);
+	IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
+	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
+		ilink1, ilink2);
+
+}
+
+#define EVENT_START_OFFSET  (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+				u32 num_events, u32 mode)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+
+	if (num_events == 0)
+		return;
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	* place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read_targ_mem(priv, ptr);
+		ptr += sizeof(u32);
+		time = iwl_read_targ_mem(priv, ptr);
+		ptr += sizeof(u32);
+		if (mode == 0) {
+			/* data, ev */
+			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+		} else {
+			data = iwl_read_targ_mem(priv, ptr);
+			ptr += sizeof(u32);
+			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+					time, data, ev);
+		}
+	}
+}
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+
+	if (priv->ucode_type == UCODE_INIT)
+		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+	else
+		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+		return;
+	}
+
+	/* event log header */
+	capacity = iwl_read_targ_mem(priv, base);
+	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+		return;
+	}
+
+	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
+			size, num_wraps);
+
+	/* if uCode has wrapped back to top of log, start at the oldest entry,
+	 * i.e the next one that uCode would fill. */
+	if (num_wraps)
+		iwl_print_event_log(priv, next_entry,
+					capacity - next_entry, mode);
+	/* (then/else) start at top of log */
+	iwl_print_event_log(priv, 0, next_entry, mode);
+
+}
 /**
  * iwl_irq_handle_error - called for HW or SW error interrupt from card
  */
@@ -2040,191 +2222,6 @@ int iwl_verify_ucode(struct iwl_priv *pr
 EXPORT_SYMBOL(iwl_verify_ucode);
 
 
-static const char *desc_lookup_text[] = {
-	"OK",
-	"FAIL",
-	"BAD_PARAM",
-	"BAD_CHECKSUM",
-	"NMI_INTERRUPT_WDG",
-	"SYSASSERT",
-	"FATAL_ERROR",
-	"BAD_COMMAND",
-	"HW_ERROR_TUNE_LOCK",
-	"HW_ERROR_TEMPERATURE",
-	"ILLEGAL_CHAN_FREQ",
-	"VCC_NOT_STABLE",
-	"FH_ERROR",
-	"NMI_INTERRUPT_HOST",
-	"NMI_INTERRUPT_ACTION_PT",
-	"NMI_INTERRUPT_UNKNOWN",
-	"UCODE_VERSION_MISMATCH",
-	"HW_ERROR_ABS_LOCK",
-	"HW_ERROR_CAL_LOCK_FAIL",
-	"NMI_INTERRUPT_INST_ACTION_PT",
-	"NMI_INTERRUPT_DATA_ACTION_PT",
-	"NMI_TRM_HW_ER",
-	"NMI_INTERRUPT_TRM",
-	"NMI_INTERRUPT_BREAK_POINT"
-	"DEBUG_0",
-	"DEBUG_1",
-	"DEBUG_2",
-	"DEBUG_3",
-	"UNKNOWN"
-};
-
-static const char *desc_lookup(int i)
-{
-	int max = ARRAY_SIZE(desc_lookup_text) - 1;
-
-	if (i < 0 || i > max)
-		i = max;
-
-	return desc_lookup_text[i];
-}
-
-#define ERROR_START_OFFSET  (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
-
-void iwl_dump_nic_error_log(struct iwl_priv *priv)
-{
-	u32 data2, line;
-	u32 desc, time, count, base, data1;
-	u32 blink1, blink2, ilink1, ilink2;
-
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
-	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
-		return;
-	}
-
-	count = iwl_read_targ_mem(priv, base);
-
-	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
-		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
-		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
-			priv->status, count);
-	}
-
-	desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
-	blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
-	blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
-	ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
-	ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
-	data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
-	data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
-	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
-	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
-
-	IWL_ERR(priv, "Desc                               Time       "
-		"data1      data2      line\n");
-	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
-		desc_lookup(desc), desc, time, data1, data2, line);
-	IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
-	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
-		ilink1, ilink2);
-
-}
-EXPORT_SYMBOL(iwl_dump_nic_error_log);
-
-#define EVENT_START_OFFSET  (4 * sizeof(u32))
-
-/**
- * iwl_print_event_log - Dump error event log to syslog
- *
- */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
-				u32 num_events, u32 mode)
-{
-	u32 i;
-	u32 base;       /* SRAM byte address of event log header */
-	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
-	u32 ptr;        /* SRAM byte address of log data */
-	u32 ev, time, data; /* event log data */
-
-	if (num_events == 0)
-		return;
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
-	if (mode == 0)
-		event_size = 2 * sizeof(u32);
-	else
-		event_size = 3 * sizeof(u32);
-
-	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
-	/* "time" is actually "data" for mode 0 (no timestamp).
-	* place event id # at far right for easier visual parsing. */
-	for (i = 0; i < num_events; i++) {
-		ev = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		time = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		if (mode == 0) {
-			/* data, ev */
-			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
-		} else {
-			data = iwl_read_targ_mem(priv, ptr);
-			ptr += sizeof(u32);
-			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
-					time, data, ev);
-		}
-	}
-}
-
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
-{
-	u32 base;       /* SRAM byte address of event log header */
-	u32 capacity;   /* event log capacity in # entries */
-	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
-	u32 num_wraps;  /* # times uCode wrapped to top of log */
-	u32 next_entry; /* index of next entry to be written by uCode */
-	u32 size;       /* # entries that we'll print */
-
-	if (priv->ucode_type == UCODE_INIT)
-		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
-	else
-		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
-	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return;
-	}
-
-	/* event log header */
-	capacity = iwl_read_targ_mem(priv, base);
-	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
-	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
-	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
-	size = num_wraps ? capacity : next_entry;
-
-	/* bail out if nothing in log */
-	if (size == 0) {
-		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		return;
-	}
-
-	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
-			size, num_wraps);
-
-	/* if uCode has wrapped back to top of log, start at the oldest entry,
-	 * i.e the next one that uCode would fill. */
-	if (num_wraps)
-		iwl_print_event_log(priv, next_entry,
-					capacity - next_entry, mode);
-	/* (then/else) start at top of log */
-	iwl_print_event_log(priv, 0, next_entry, mode);
-
-}
-EXPORT_SYMBOL(iwl_dump_nic_event_log);
-
 void iwl_rf_kill_ct_config(struct iwl_priv *priv)
 {
 	struct iwl_ct_kill_config cmd;
--- wireless-testing.orig/drivers/net/wireless/iwlwifi/iwl-core.h	2009-07-14 15:47:13.000000000 +0200
+++ wireless-testing/drivers/net/wireless/iwlwifi/iwl-core.h	2009-07-14 15:47:15.000000000 +0200
@@ -472,7 +472,6 @@ int iwl_pci_resume(struct pci_dev *pdev)
 /*****************************************************
 *  Error Handling Debugging
 ******************************************************/
-void iwl_dump_nic_error_log(struct iwl_priv *priv);
 void iwl_dump_nic_event_log(struct iwl_priv *priv);
 void iwl_clear_isr_stats(struct iwl_priv *priv);
 



^ permalink raw reply

* Re: 2.6.31-rc2: Possible regression in rt61pci driver
From: Chris Clayton @ 2009-07-14 11:04 UTC (permalink / raw)
  To: linux-wireless; +Cc: LKML
In-Reply-To: <c6b1100b0907130127g3d4013c6n3264f79bd74bc9@mail.gmail.com>

Hi again,


2009/7/13 Chris Clayton <chris2553@googlemail.com>:
> Hi,
>
> Please cc me on any reply because I'm not subscribed.
>
> I've been testing 2.6.31 development kernels on my laptop and find
> that I can induce a complete lock-up more or less at will. To do so,
> all I have to do is generate some network traffic on my wireless LAN
> (I've been using wget to transfer a file from another box on my LAN)
> and then wait. If I run netstat repeatedly while waiting, I see a TCP
> connection to port 21 on another box on my LAN in a TIME_WAIT state.
> It seems that when that connection disappears, the laptop locks up
> hard and I can only recover by powering off and on again. I think the
> problem is related to the rt61pci driver because I haven't been able
> to induce the lock-up when using a wireless card that's supported by
> the ath5k driver. I started bisecting, but a couple of times I arrived
> at points where although the kernel builds OK, I have no network
> connectivity. I guessed at good, but the bisection process finished at
> a change that can't be the culprit (because it's for a different
> architecture).
>
> I attach the best diagnostics I can think of at this point in time
> (but am more than happy to provide any others that are requested). It
> includes the output from dmesg from a boot that locked up and the
> syslog journal from that boot; a description of the wireless card from
> lspci -v and the output from netstat that shows the connection I think
> is involved. As I say, feel free to ask for any other diagnostics that
> will help track the problem down.
>
> I have confirmed that the problem is still present in a kernel built
> after a 'git pull' this morning, although it was somewhere around the
> time that -rc2 was released that I first came across it. I cannot
> induce the problem with 2.6.30.1.

I've updated to 2.6.31-rc3 this morning and done some more testing.
I'm now convinced that the rt61pci driver is somehow involved in
locking up the laptop. With the (Belkin) rt61 card inserted, the
machine will lock up even if I am doing nothing (no web browsing,
email or anything else at all) except running this script in a console
window:

i=0
while true; do
        let i++
        echo -n "$i "
        sleep 1
done

In the tests I have done so far, the counter has never gone beyond 240
before the machine locked. With the (no-name) ath5k card inserted I
can use the laptop for normal web browsing, email, etc with no
problems - the counter in the script above gets to over 2000.

As I said yesterday, I'm happy to provide additional diagnostics,
apply patches, etc.

Thanks

Chris
-- 
No, Sir; there is nothing which has yet been contrived by man, by which
so much happiness is produced as by a good tavern or inn - Doctor Samuel
Johnson

^ permalink raw reply

* Re: ath5k and Atheros AR242x - No scan results
From: Joel Roth @ 2009-07-14  6:54 UTC (permalink / raw)
  To: Bob Copeland; +Cc: linux-wireless
In-Reply-To: <b6c5339f0907130708h3996b274qdcc7d7f6056a188c@mail.gmail.com>

On Mon, Jul 13, 2009 at 10:08:52AM -0400, Bob Copeland wrote:
> On Sun, Jul 12, 2009 at 4:34 PM, Joel Roth<joelz@pobox.com> wrote:
> > Vista advised me to:
> >
> > 1) turn on the hardware wifi switch <blush>
> >
> > 2) use the hotkey combination to enable wifi
> 
> It might be worth trying compat-wireless or 2.6.31-rcX.  Support
> for reading the card's internal rfkill state was added in the
> post-2.6.30 time-frame.
 
Okay, I'll give this a go and report back. Thanks.

> Bob Copeland %% www.bobcopeland.com

-- 
Joel Roth

^ permalink raw reply

* Re: [PATCH] wireless: wl12xx, fix lock imbalance
From: Luciano Coelho @ 2009-07-14  5:44 UTC (permalink / raw)
  To: ext Jiri Slaby
  Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
	linux-kernel@vger.kernel.org
In-Reply-To: <1247520266-32007-1-git-send-email-jirislaby@gmail.com>

ext Jiri Slaby wrote:
> Add omitted mutex_unlock to one of wl12xx_op_start fail paths (when
> wl12xx_chip_wakeup fails).
>   

Cool, very nice catch.  We actually just fixed this bug in our wl1271 
code (which I will hopefully send upstream this week), but we hadn't 
fixed it in the wl1251-specific code yet.

> Not sure if the device should be powered off?
>   

You should.  If the chip cannot be booted, why should it remain powered 
on? In some rare cases, the chip might fail to initialize, but can 
recover if powered off and on again, so turning it off at this point is 
the right thing to do.

> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
> ---
>   
>  drivers/net/wireless/wl12xx/main.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
> index 603d611..d241e4a 100644
> --- a/drivers/net/wireless/wl12xx/main.c
> +++ b/drivers/net/wireless/wl12xx/main.c
>   
> @@ -336,7 +336,7 @@ static int wl12xx_op_start(struct ieee80211_hw *hw)
>  
>  	ret = wl12xx_chip_wakeup(wl);
>  	if (ret < 0)
> -		return ret;
> +		goto unlock;
>   

Here you can just "goto out;" so that the chip is powered off before we 
return.

>  
>  	ret = wl->chip.op_boot(wl);
>  	if (ret < 0)
> @@ -357,7 +357,7 @@ static int wl12xx_op_start(struct ieee80211_hw *hw)
>  out:
>  	if (ret < 0)
>  		wl12xx_power_off(wl);
> -
> +unlock:
>  	mutex_unlock(&wl->mutex);
>  
>  	return ret;
>   

Thanks a lot for your patch!

-- 
Cheers,
Luca.


^ permalink raw reply

* Re: [TIP] BUG kmalloc-4096: Poison overwritten (ath5k_rx_skb_alloc)
From: Bob Copeland @ 2009-07-14  2:24 UTC (permalink / raw)
  To: Sitsofe Wheeler
  Cc: Jiri Slaby, Nick Kossifidis, Frederic Weisbecker, linux-kernel,
	linux-wireless, ath5k-devel, Luis R. Rodriguez
In-Reply-To: <20090628202329.GB1546@sucs.org>

On Sun, Jun 28, 2009 at 09:23:29PM +0100, Sitsofe Wheeler wrote:
> OK I'm still trying to follow this. I forwarded your patch to 2.6.31-rc1
> but this time I have kmemleak enabled. I left it streaming radio for the
> past few hours and the following appeared in the logs:
> 
> Jun 28 17:01:34 eeepc kernel: [  744.083787] kmemleak: unreferenced object 0xf5845770 (size 64):
> Jun 28 17:01:34 eeepc kernel: [  744.083795] kmemleak:   comm "swapper", pid 1, jiffies 4294673468
> Jun 28 17:01:34 eeepc kernel: [  744.083799] kmemleak:   backtrace:
> Jun 28 17:01:34 eeepc kernel: [  744.083811] kmemleak:     [<c01a749d>] kmemleak_alloc+0x11d/0x2a0
> Jun 28 17:01:34 eeepc kernel: [  744.083818] kmemleak:     [<c01a4376>] __kmalloc+0x136/0x210
> Jun 28 17:01:34 eeepc kernel: [  744.083828] kmemleak:     [<c043f923>] ieee80211_register_hw+0x83/0x4b0
[snip]


> There were quite a few leaks before this. I dunno if kmemleak is
> spurious or not. As always, any ideas?

I can't seem to boot a kmemleak kernel myself.  But there were a number
of fixes to kmemleak recently to track memory allocated in
ieee80211_register_hw, IIRC -- so it would be good to know if this
persists with all the latest fixes.

As always, no ideas :(  I'm guessing nothing in .31-rc has magically
fixed any problems?  I still say it's some kind of race condition
made worse by the eeepc performance, but unless I can find one or
replicate it with introduced load, I'm afraid I'm stumped.  

(Well, I guess we can always go off and rewrite the rx loop without
the circular terminator and see how well that works on your HW.)

-- 
Bob Copeland %% www.bobcopeland.com


^ permalink raw reply

* Re: [PATCH] imwc3200: move iwmc3200 SDIO ids to sdio_ids.h
From: Marcel Holtmann @ 2009-07-14  2:17 UTC (permalink / raw)
  To: David Miller
  Cc: tomas.winkler, drzeus-list, netdev, linux-wireless, linux-kernel
In-Reply-To: <20090713.191001.70978868.davem@davemloft.net>

Hi Dave,

> From: Tomas Winkler <tomas.winkler@intel.com>
> Date: Tue, 14 Jul 2009 01:09:13 +0300
> 
> > 1. add intel's sdio vendor id to sdio_ids.h
> > 2. move iwmc3200 sdio devices ids to sdio_ids.h
> > 
> > This patch is against 2.6.31-rc2
> > 7638d5322bd89d49e013a03fe2afaeb6d214fabd
> > 
> > Cc:inaky.perez-gonzalez@intel.com
> > Cc:cindy.h.kao@intel.com
> > Cc:samuel.ortiz@intel.com
> > Cc:yi.zhu@intel.com
> > Cc:drzeus-list@drzeus.cx
> > Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> 
> Since wimax stuff goes directly through me and John Linville handles
> wireless things, you're making this overly difficult by combining
> changes for those two subsystems into a single patch.
> 
> Please split this up, thanks.

if Pierre is not afraid of a merge conflict during the next merge window
with the SDIO changes, then I think this should go completely via you. I
am also fine if we just split this up and send one patch to Pierre and
one to you. However since speaking from history, your next tree gets
mostly merged before Pierre's we might producing build errors during the
next merge window.

I can ACK the WiMAX and WiFi changes since both Inaky and Samuel are on
vacation.

Regards

Marcel



^ permalink raw reply

* Re: [PATCH] imwc3200: move iwmc3200 SDIO ids to sdio_ids.h
From: Marcel Holtmann @ 2009-07-14  2:14 UTC (permalink / raw)
  To: Tomas Winkler; +Cc: drzeus-list, netdev, linux-wireless, linux-kernel
In-Reply-To: <1247522953-12702-1-git-send-email-tomas.winkler@intel.com>

Hi Tomas,

> 1. add intel's sdio vendor id to sdio_ids.h
> 2. move iwmc3200 sdio devices ids to sdio_ids.h

this needs a better commit message since you are touching three
subsystems right now.

Please explain what you are doing. Sounds maybe too obvious, but it is
important that we have clear commit message. Especially when it is
touching more than one subsystem and people have to resolve merge
conflicts.

> This patch is against 2.6.31-rc2
> 7638d5322bd89d49e013a03fe2afaeb6d214fabd

This should not be part of the commit message.

> Cc:inaky.perez-gonzalez@intel.com
> Cc:cindy.h.kao@intel.com
> Cc:samuel.ortiz@intel.com
> Cc:yi.zhu@intel.com
> Cc:drzeus-list@drzeus.cx
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> ---
>  drivers/net/wimax/i2400m/sdio.c          |   10 ++++------
>  drivers/net/wireless/iwmc3200wifi/sdio.c |    4 +++-
>  drivers/net/wireless/iwmc3200wifi/sdio.h |    3 ---
>  include/linux/mmc/sdio_ids.h             |    5 +++++
>  4 files changed, 12 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
> index 2538825..3dc1990 100644
> --- a/drivers/net/wimax/i2400m/sdio.c
> +++ b/drivers/net/wimax/i2400m/sdio.c
> @@ -58,6 +58,7 @@
>   */
>  
>  #include <linux/debugfs.h>
> +#include <linux/mmc/sdio_ids.h>
>  #include <linux/mmc/sdio.h>
>  #include <linux/mmc/sdio_func.h>
>  #include "i2400m-sdio.h"
> @@ -501,14 +502,11 @@ void i2400ms_remove(struct sdio_func *func)
>  	d_fnend(3, dev, "SDIO func %p\n", func);
>  }
>  
> -enum {
> -	I2400MS_INTEL_VID = 0x89,
> -};
> -
>  static
>  const struct sdio_device_id i2400ms_sdio_ids[] = {
> -	/* Intel: i2400m WiMAX over SDIO */
> -	{ SDIO_DEVICE(I2400MS_INTEL_VID, 0x1402) },
> +	/* Intel: i2400m WiMAX (iwm3200) over SDIO */
> +	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
> +	  SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
>  	{ }, 			/* end: all zeroes */

for readability, please indent the SDIO_DEVICE_ID_INTEL...

Otherwise you easily assume you have two SDIO_DEVICE() statement.

>  };
>  MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
> diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
> index 9166818..995a3f6 100644
> --- a/drivers/net/wireless/iwmc3200wifi/sdio.c
> +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
> @@ -65,6 +65,7 @@
>  #include <linux/kernel.h>
>  #include <linux/netdevice.h>
>  #include <linux/debugfs.h>
> +#include <linux/mmc/sdio_ids.h>
>  #include <linux/mmc/sdio.h>
>  #include <linux/mmc/sdio_func.h>
>  
> @@ -492,7 +493,8 @@ static void iwm_sdio_remove(struct sdio_func *func)
>  }
>  
>  static const struct sdio_device_id iwm_sdio_ids[] = {
> -	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, SDIO_DEVICE_ID_IWM) },
> +	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
> +	  SDIO_DEVICE_ID_INTEL_IWMC3200WIFI) },
>  	{ /* end: all zeroes */	},

Same here.

>  };
>  MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
> diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.h b/drivers/net/wireless/iwmc3200wifi/sdio.h
> index b3c156b..aab6b68 100644
> --- a/drivers/net/wireless/iwmc3200wifi/sdio.h
> +++ b/drivers/net/wireless/iwmc3200wifi/sdio.h
> @@ -39,9 +39,6 @@
>  #ifndef __IWM_SDIO_H__
>  #define __IWM_SDIO_H__
>  
> -#define SDIO_VENDOR_ID_INTEL 0x89
> -#define SDIO_DEVICE_ID_IWM   0x1403
> -
>  #define IWM_SDIO_DATA_ADDR           0x0
>  #define IWM_SDIO_INTR_ENABLE_ADDR    0x14
>  #define IWM_SDIO_INTR_STATUS_ADDR    0x13
> diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
> index 39751c8..b46a57a 100644
> --- a/include/linux/mmc/sdio_ids.h
> +++ b/include/linux/mmc/sdio_ids.h
> @@ -22,6 +22,11 @@
>  /*
>   * Vendors and devices.  Sort key: vendor first, device next.
>   */
> +#define SDIO_VENDOR_ID_INTEL			0x0089
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP        0x1404
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406

While you are touching files all over, what about GPS?
 
>  #define SDIO_VENDOR_ID_MARVELL			0x02df
>  #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103

Regards

Marcel



^ permalink raw reply

* Re: [PATCH] imwc3200: move iwmc3200 SDIO ids to sdio_ids.h
From: David Miller @ 2009-07-14  2:10 UTC (permalink / raw)
  To: tomas.winkler; +Cc: drzeus-list, netdev, linux-wireless, linux-kernel
In-Reply-To: <1247522953-12702-1-git-send-email-tomas.winkler@intel.com>

From: Tomas Winkler <tomas.winkler@intel.com>
Date: Tue, 14 Jul 2009 01:09:13 +0300

> 1. add intel's sdio vendor id to sdio_ids.h
> 2. move iwmc3200 sdio devices ids to sdio_ids.h
> 
> This patch is against 2.6.31-rc2
> 7638d5322bd89d49e013a03fe2afaeb6d214fabd
> 
> Cc:inaky.perez-gonzalez@intel.com
> Cc:cindy.h.kao@intel.com
> Cc:samuel.ortiz@intel.com
> Cc:yi.zhu@intel.com
> Cc:drzeus-list@drzeus.cx
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>

Since wimax stuff goes directly through me and John Linville handles
wireless things, you're making this overly difficult by combining
changes for those two subsystems into a single patch.

Please split this up, thanks.

^ permalink raw reply

* RE: [PATCH] imwc3200: move iwmc3200 SDIO ids to sdio_ids.h
From: Zhu, Yi @ 2009-07-14  1:59 UTC (permalink / raw)
  To: Winkler, Tomas, drzeus-list@drzeus.cx, netdev@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
  Cc: Winkler, Tomas
In-Reply-To: <1247522953-12702-1-git-send-email-tomas.winkler@intel.com>

Tomas wrote:

> +#define SDIO_VENDOR_ID_INTEL			0x0089
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
> +#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP        0x1404

Looks good. Please replace the above spaces with a TAB.

> +#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
> 
>  #define SDIO_VENDOR_ID_MARVELL			0x02df
>  #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103

Thanks,
-yi

^ permalink raw reply

* [PATCH 2.6.31] ath5k: temporarily disable crypto for AP mode
From: Bob Copeland @ 2009-07-14  1:57 UTC (permalink / raw)
  To: linville; +Cc: proski, ath5k-devel, linux-wireless

Pavel Roskin reported some issues with using AP mode without
nohwcrypt=1.  Most likely this is similar to the problem fixed
some time ago in ath9k by 3f53dd64f192450cb331c0fecfc26ca952fb242f,
"ath9k: Fix hw crypto configuration for TKIP in AP mode."

That only affects TKIP but it's easiest to just disable that and
WEP too until we get a proper fix in.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
---

Pavel, this ok with you for now?

 drivers/net/wireless/ath/ath5k/base.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 20ba6fa..7db32ce 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2980,6 +2980,9 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (modparam_nohwcrypt)
 		return -EOPNOTSUPP;
 
+	if (sc->opmode == NL80211_IFTYPE_AP)
+		return -EOPNOTSUPP;
+
 	switch (key->alg) {
 	case ALG_WEP:
 	case ALG_TKIP:
-- 
1.6.2.5

-- 
Bob Copeland %% www.bobcopeland.com


^ permalink raw reply related

* [PATCH] mac80211: use correct address for mesh Path Error
From: Andrey Yurovsky @ 2009-07-14  0:00 UTC (permalink / raw)
  To: linux-wireless; +Cc: johannes, Andrey Yurovsky

From: Javier Cardona <javier@cozybit.com>

For forwarded frames, we save the precursor address in addr1 in case it
needs to be used to send a Path Error.  mesh_path_discard_frame,
however, was using addr2 instead of addr1 to send Path Error frames, so
correct that and also make the comment regarding this more clear.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
---
 net/mac80211/mesh_pathtbl.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 1981af9..1ede8cb 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -507,8 +507,10 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
  * @skb: frame to discard
  * @sdata: network subif the frame was to be sent through
  *
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor.  The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
  *
  * Locking: the function must me called within a rcu_read_lock region
  */
@@ -523,7 +525,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		u8 *ra, *da;
 
 		da = hdr->addr3;
-		ra = hdr->addr2;
+		ra = hdr->addr1;
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
 			dsn = ++mpath->dsn;
-- 
1.5.6.3


^ permalink raw reply related

* [PATCH] rtl8187: updating Kconfig with info of branded devices
From: Hin-Tak Leung @ 2009-07-13 23:05 UTC (permalink / raw)
  To: linux-wireless, linville
  Cc: Hin-Tak Leung, Hin-Tak Leung, Gábor Stefanik

Adding more detailed info about Asus motherboards and Ralink devices.

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
---
 drivers/net/wireless/Kconfig |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 7d5902d..ca7a8a3 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -428,10 +428,12 @@ config RTL8187
 	  Micronet SP907GK V5
 	  Encore ENUWI-G2
 	  Trendnet TEW-424UB
-	  ASUS P5B Deluxe
+	  ASUS P5B Deluxe/P5K Premium motherboards
 	  Toshiba Satellite Pro series of laptops
 	  Asus Wireless Link
 	  Linksys WUSB54GC-EU v2
+	    (v1 = rt73usb; v3 is rt2070-based,
+	     use staging/rt3070 or try rt2800usb)
 
 	  Thanks to Realtek for their support!
 
-- 
1.6.2.5


^ permalink raw reply related

* [HACK] mac80211: don't set netdev parent pointer
From: Johannes Berg @ 2009-07-13 22:39 UTC (permalink / raw)
  To: John Linville; +Cc: linux-wireless
In-Reply-To: <20090713223333.042733013@sipsolutions.net>

To allow playing with network namespaces even if you
have sysfs configured... don't try this on your normal
kernel, it will probably confuse userspace.

NOT-signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
 net/mac80211/iface.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- wireless-testing.orig/net/mac80211/iface.c	2009-07-14 00:30:10.000000000 +0200
+++ wireless-testing/net/mac80211/iface.c	2009-07-14 00:30:14.000000000 +0200
@@ -803,7 +803,7 @@ int ieee80211_if_add(struct ieee80211_lo
 		goto fail;
 
 	memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
-	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
+//	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
 
 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
 	sdata = netdev_priv(ndev);



^ permalink raw reply

* [PATCH 3/3] mac80211: allow using network namespaces
From: Johannes Berg @ 2009-07-13 22:33 UTC (permalink / raw)
  To: John Linville; +Cc: linux-wireless
In-Reply-To: <20090713223333.042733013@sipsolutions.net>

This finally opens up the ability to put mac80211 devices
into different network namespaces. As long as you don't
have sysfs, that is.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
Semantically, this depends on both
  mac80211: cooperate more with network namespaces
and
  cfg80211: make aware of net namespaces

but in the code only the latter dependency is obvious,
so I'm sending it as a separate patch.

 net/mac80211/iface.c |    1 +
 net/mac80211/main.c  |    1 +
 2 files changed, 2 insertions(+)

--- wireless-testing.orig/net/mac80211/main.c	2009-07-14 00:29:34.000000000 +0200
+++ wireless-testing/net/mac80211/main.c	2009-07-14 00:30:10.000000000 +0200
@@ -620,6 +620,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(
 	if (!wiphy)
 		return NULL;
 
+	wiphy->netnsok = true;
 	wiphy->privid = mac80211_wiphy_privid;
 
 	/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
--- wireless-testing.orig/net/mac80211/iface.c	2009-07-14 00:30:05.000000000 +0200
+++ wireless-testing/net/mac80211/iface.c	2009-07-14 00:30:10.000000000 +0200
@@ -787,6 +787,7 @@ int ieee80211_if_add(struct ieee80211_lo
 			    name, ieee80211_if_setup);
 	if (!ndev)
 		return -ENOMEM;
+	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
 
 	ndev->needed_headroom = local->tx_headroom +
 				4*6 /* four MAC addresses */

-- 


^ permalink raw reply

* [PATCH 2/3] cfg80211: make aware of net namespaces
From: Johannes Berg @ 2009-07-13 22:33 UTC (permalink / raw)
  To: John Linville; +Cc: linux-wireless
In-Reply-To: <20090713223333.042733013@sipsolutions.net>

In order to make cfg80211/nl80211 aware of network namespaces,
we have to do the following things:

 * del_virtual_intf method takes an interface index rather
   than a netdev pointer - simply change this

 * nl80211 uses init_net a lot, it changes to use the sender's
   network namespace

 * scan requests use the interface index, hold a netdev pointer
   and reference instead

 * we want a wiphy and its associated virtual interfaces to be
   in one netns together, so
    - we need to be able to change ns for a given interface, so
      export dev_change_net_namespace()
    - for each virtual interface set the NETIF_F_NETNS_LOCAL
      flag, and clear that flag only when the wiphy changes ns,
      to disallow breaking this invariant

 * when a network namespace goes away, we need to reparent the
   wiphy to init_net

 * cfg80211 users that support creating virtual interfaces must
   create them in the wiphy's namespace, currently this affects
   only mac80211

The end result is that you can now switch an entire wiphy into
a different network namespace with the new command
	iw phy#<idx> set netns <pid>
and all virtual interfaces will follow (or the operation fails).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
 include/linux/nl80211.h |    9 ++
 include/net/cfg80211.h  |   40 ++++++++-
 net/core/dev.c          |    1 
 net/mac80211/cfg.c      |   14 ---
 net/wireless/core.c     |   75 ++++++++++++++++-
 net/wireless/core.h     |    5 -
 net/wireless/nl80211.c  |  202 +++++++++++++++++++++++++++++++++---------------
 net/wireless/scan.c     |   22 +----
 net/wireless/sme.c      |    3 
 9 files changed, 272 insertions(+), 99 deletions(-)

--- wireless-testing.orig/include/net/cfg80211.h	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/include/net/cfg80211.h	2009-07-14 00:30:08.000000000 +0200
@@ -542,7 +542,7 @@ struct cfg80211_ssid {
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
  * @wiphy: the wiphy this was for
- * @ifidx: the interface index
+ * @dev: the interface
  */
 struct cfg80211_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -554,7 +554,7 @@ struct cfg80211_scan_request {
 
 	/* internal */
 	struct wiphy *wiphy;
-	int ifidx;
+	struct net_device *dev;
 	bool aborted;
 };
 
@@ -845,7 +845,8 @@ struct cfg80211_bitrate_mask {
  * @resume: wiphy device needs to be resumed
  *
  * @add_virtual_intf: create a new virtual interface with the given name,
- *	must set the struct wireless_dev's iftype.
+ *	must set the struct wireless_dev's iftype. Beware: You must create
+ *	the new netdev in the wiphy's network namespace!
  *
  * @del_virtual_intf: remove the virtual interface determined by ifindex.
  *
@@ -937,7 +938,7 @@ struct cfg80211_ops {
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
 				    enum nl80211_iftype type, u32 *flags,
 				    struct vif_params *params);
-	int	(*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
+	int	(*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
 	int	(*change_virtual_intf)(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       enum nl80211_iftype type, u32 *flags,
@@ -1088,6 +1089,9 @@ struct cfg80211_ops {
  * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
  *	-1 = fragmentation disabled, only odd values >= 256 used
  * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ * @net: the network namespace this wiphy currently lives in
+ * @netnsok: if set to false, do not allow changing the netns of this
+ *	wiphy at all
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1101,6 +1105,8 @@ struct wiphy {
 	bool custom_regulatory;
 	bool strict_regulatory;
 
+	bool netnsok;
+
 	enum cfg80211_signal_type signal_type;
 
 	int bss_priv_size;
@@ -1139,9 +1145,35 @@ struct wiphy {
 	/* dir in debugfs: ieee80211/<wiphyname> */
 	struct dentry *debugfsdir;
 
+#ifdef CONFIG_NET_NS
+	/* the network namespace this phy lives in currently */
+	struct net *_net;
+#endif
+
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
 
+#ifdef CONFIG_NET_NS
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+	return wiphy->_net;
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+	wiphy->_net = net;
+}
+#else
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+	return &init_net;
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+}
+#endif
+
 /**
  * wiphy_priv - return priv from wiphy
  *
--- wireless-testing.orig/net/mac80211/cfg.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/mac80211/cfg.c	2009-07-14 00:30:08.000000000 +0200
@@ -57,19 +57,9 @@ static int ieee80211_add_iface(struct wi
 	return 0;
 }
 
-static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex)
+static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
 {
-	struct net_device *dev;
-	struct ieee80211_sub_if_data *sdata;
-
-	/* we're under RTNL */
-	dev = __dev_get_by_index(&init_net, ifindex);
-	if (!dev)
-		return -ENODEV;
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
-	ieee80211_if_remove(sdata);
+	ieee80211_if_remove(IEEE80211_DEV_TO_SUB_IF(dev));
 
 	return 0;
 }
--- wireless-testing.orig/net/wireless/nl80211.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/wireless/nl80211.c	2009-07-14 00:30:08.000000000 +0200
@@ -14,8 +14,10 @@
 #include <linux/rtnetlink.h>
 #include <linux/netlink.h>
 #include <linux/etherdevice.h>
+#include <net/net_namespace.h>
 #include <net/genetlink.h>
 #include <net/cfg80211.h>
+#include <net/sock.h>
 #include "core.h"
 #include "nl80211.h"
 #include "reg.h"
@@ -27,24 +29,26 @@ static struct genl_family nl80211_fam = 
 	.hdrsize = 0,		/* no private header */
 	.version = 1,		/* no particular meaning now */
 	.maxattr = NL80211_ATTR_MAX,
+	.netnsok = true,
 };
 
 /* internal helper: get rdev and dev */
-static int get_rdev_dev_by_info_ifindex(struct nlattr **attrs,
+static int get_rdev_dev_by_info_ifindex(struct genl_info *info,
 				       struct cfg80211_registered_device **rdev,
 				       struct net_device **dev)
 {
+	struct nlattr **attrs = info->attrs;
 	int ifindex;
 
 	if (!attrs[NL80211_ATTR_IFINDEX])
 		return -EINVAL;
 
 	ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
-	*dev = dev_get_by_index(&init_net, ifindex);
+	*dev = dev_get_by_index(genl_info_net(info), ifindex);
 	if (!*dev)
 		return -ENODEV;
 
-	*rdev = cfg80211_get_dev_from_ifindex(ifindex);
+	*rdev = cfg80211_get_dev_from_ifindex(genl_info_net(info), ifindex);
 	if (IS_ERR(*rdev)) {
 		dev_put(*dev);
 		return PTR_ERR(*rdev);
@@ -133,6 +137,7 @@ static struct nla_policy nl80211_policy[
 	[NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
 	[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
 	[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
+	[NL80211_ATTR_PID] = { .type = NLA_U32 },
 };
 
 /* policy for the attributes */
@@ -532,6 +537,10 @@ static int nl80211_send_wiphy(struct sk_
 	CMD(deauth, DEAUTHENTICATE);
 	CMD(disassoc, DISASSOCIATE);
 	CMD(join_ibss, JOIN_IBSS);
+	if (dev->wiphy.netnsok) {
+		i++;
+		NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
+	}
 
 #undef CMD
 
@@ -562,6 +571,8 @@ static int nl80211_dump_wiphy(struct sk_
 
 	mutex_lock(&cfg80211_mutex);
 	list_for_each_entry(dev, &cfg80211_rdev_list, list) {
+		if (!net_eq(wiphy_net(&dev->wiphy), sock_net(skb->sk)))
+			continue;
 		if (++idx <= start)
 			continue;
 		if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).pid,
@@ -867,6 +878,8 @@ static int nl80211_dump_interface(struct
 
 	mutex_lock(&cfg80211_mutex);
 	list_for_each_entry(dev, &cfg80211_rdev_list, list) {
+		if (!net_eq(wiphy_net(&dev->wiphy), sock_net(skb->sk)))
+			continue;
 		if (wp_idx < wp_start) {
 			wp_idx++;
 			continue;
@@ -907,7 +920,7 @@ static int nl80211_get_interface(struct 
 	struct net_device *netdev;
 	int err;
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &dev, &netdev);
+	err = get_rdev_dev_by_info_ifindex(info, &dev, &netdev);
 	if (err)
 		return err;
 
@@ -975,7 +988,7 @@ static int nl80211_set_interface(struct 
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1098,26 +1111,25 @@ static int nl80211_new_interface(struct 
 static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
-	int ifindex, err;
+	int err;
 	struct net_device *dev;
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
-	ifindex = dev->ifindex;
-	dev_put(dev);
 
 	if (!rdev->ops->del_virtual_intf) {
 		err = -EOPNOTSUPP;
 		goto out;
 	}
 
-	err = rdev->ops->del_virtual_intf(&rdev->wiphy, ifindex);
+	err = rdev->ops->del_virtual_intf(&rdev->wiphy, dev);
 
  out:
 	cfg80211_unlock_rdev(rdev);
+	dev_put(dev);
  unlock_rtnl:
 	rtnl_unlock();
 	return err;
@@ -1195,7 +1207,7 @@ static int nl80211_get_key(struct sk_buf
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1273,7 +1285,7 @@ static int nl80211_set_key(struct sk_buf
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1332,7 +1344,7 @@ static int nl80211_new_key(struct sk_buf
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1379,7 +1391,7 @@ static int nl80211_del_key(struct sk_buf
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1428,7 +1440,7 @@ static int nl80211_addset_beacon(struct 
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1515,7 +1527,7 @@ static int nl80211_del_beacon(struct sk_
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -1725,13 +1737,13 @@ static int nl80211_dump_station(struct s
 
 	rtnl_lock();
 
-	netdev = __dev_get_by_index(&init_net, ifidx);
+	netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
 	if (!netdev) {
 		err = -ENODEV;
 		goto out_rtnl;
 	}
 
-	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_rtnl;
@@ -1790,7 +1802,7 @@ static int nl80211_get_station(struct sk
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -1828,14 +1840,16 @@ static int nl80211_get_station(struct sk
 /*
  * Get vlan interface making sure it is on the right wiphy.
  */
-static int get_vlan(struct nlattr *vlanattr,
+static int get_vlan(struct genl_info *info,
 		    struct cfg80211_registered_device *rdev,
 		    struct net_device **vlan)
 {
+	struct nlattr *vlanattr = info->attrs[NL80211_ATTR_STA_VLAN];
 	*vlan = NULL;
 
 	if (vlanattr) {
-		*vlan = dev_get_by_index(&init_net, nla_get_u32(vlanattr));
+		*vlan = dev_get_by_index(genl_info_net(info),
+					 nla_get_u32(vlanattr));
 		if (!*vlan)
 			return -ENODEV;
 		if (!(*vlan)->ieee80211_ptr)
@@ -1890,11 +1904,11 @@ static int nl80211_set_station(struct sk
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
-	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], rdev, &params.vlan);
+	err = get_vlan(info, rdev, &params.vlan);
 	if (err)
 		goto out;
 
@@ -2003,11 +2017,11 @@ static int nl80211_new_station(struct sk
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
-	err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], rdev, &params.vlan);
+	err = get_vlan(info, rdev, &params.vlan);
 	if (err)
 		goto out;
 
@@ -2078,7 +2092,7 @@ static int nl80211_del_station(struct sk
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2184,13 +2198,13 @@ static int nl80211_dump_mpath(struct sk_
 
 	rtnl_lock();
 
-	netdev = __dev_get_by_index(&init_net, ifidx);
+	netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
 	if (!netdev) {
 		err = -ENODEV;
 		goto out_rtnl;
 	}
 
-	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_rtnl;
@@ -2254,7 +2268,7 @@ static int nl80211_get_mpath(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2313,7 +2327,7 @@ static int nl80211_set_mpath(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2361,7 +2375,7 @@ static int nl80211_new_mpath(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2403,7 +2417,7 @@ static int nl80211_del_mpath(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2454,7 +2468,7 @@ static int nl80211_set_bss(struct sk_buf
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2573,7 +2587,7 @@ static int nl80211_get_mesh_params(struc
 	rtnl_lock();
 
 	/* Look up our device */
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2690,7 +2704,7 @@ static int nl80211_set_mesh_params(struc
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -2946,7 +2960,7 @@ static int nl80211_trigger_scan(struct s
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto out_rtnl;
 
@@ -3068,14 +3082,16 @@ static int nl80211_trigger_scan(struct s
 		       request->ie_len);
 	}
 
-	request->ifidx = dev->ifindex;
+	request->dev = dev;
 	request->wiphy = &rdev->wiphy;
 
 	rdev->scan_req = request;
 	err = rdev->ops->scan(&rdev->wiphy, dev, request);
 
-	if (!err)
+	if (!err) {
 		nl80211_send_scan_start(rdev, dev);
+		dev_hold(dev);
+	}
 
  out_free:
 	if (err) {
@@ -3197,11 +3213,11 @@ static int nl80211_dump_scan(struct sk_b
 		cb->args[0] = ifidx;
 	}
 
-	dev = dev_get_by_index(&init_net, ifidx);
+	dev = dev_get_by_index(sock_net(skb->sk), ifidx);
 	if (!dev)
 		return -ENODEV;
 
-	rdev = cfg80211_get_dev_from_ifindex(ifidx);
+	rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
 	if (IS_ERR(rdev)) {
 		err = PTR_ERR(rdev);
 		goto out_put_netdev;
@@ -3311,7 +3327,7 @@ static int nl80211_authenticate(struct s
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3447,7 +3463,7 @@ static int nl80211_associate(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3530,7 +3546,7 @@ static int nl80211_deauthenticate(struct
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3592,7 +3608,7 @@ static int nl80211_disassociate(struct s
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3665,7 +3681,7 @@ static int nl80211_join_ibss(struct sk_b
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3738,7 +3754,7 @@ static int nl80211_leave_ibss(struct sk_
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3923,7 +3939,7 @@ static int nl80211_connect(struct sk_buf
 		return err;
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -3999,7 +4015,7 @@ static int nl80211_disconnect(struct sk_
 
 	rtnl_lock();
 
-	err = get_rdev_dev_by_info_ifindex(info->attrs, &rdev, &dev);
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
 	if (err)
 		goto unlock_rtnl;
 
@@ -4023,6 +4039,47 @@ unlock_rtnl:
 	return err;
 }
 
+static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev;
+	struct net *net;
+	int err;
+	u32 pid;
+
+	if (!info->attrs[NL80211_ATTR_PID])
+		return -EINVAL;
+
+	pid = nla_get_u32(info->attrs[NL80211_ATTR_PID]);
+
+	rtnl_lock();
+
+	rdev = cfg80211_get_dev_from_info(info);
+	if (IS_ERR(rdev)) {
+		err = PTR_ERR(rdev);
+		goto out;
+	}
+
+	net = get_net_ns_by_pid(pid);
+	if (IS_ERR(net)) {
+		err = PTR_ERR(net);
+		goto out;
+	}
+
+	err = 0;
+
+	/* check if anything to do */
+	if (net_eq(wiphy_net(&rdev->wiphy), net))
+		goto out_put_net;
+
+	err = cfg80211_switch_netns(rdev, net);
+ out_put_net:
+	put_net(net);
+ out:
+	cfg80211_unlock_rdev(rdev);
+	rtnl_unlock();
+	return err;
+}
+
 static struct genl_ops nl80211_ops[] = {
 	{
 		.cmd = NL80211_CMD_GET_WIPHY,
@@ -4256,6 +4313,12 @@ static struct genl_ops nl80211_ops[] = {
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_SET_WIPHY_NETNS,
+		.doit = nl80211_wiphy_netns,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
 	.name = "mlme",
@@ -4287,7 +4350,8 @@ void nl80211_notify_dev_rename(struct cf
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_config_mcgrp.id, GFP_KERNEL);
 }
 
 static int nl80211_add_scan_req(struct sk_buff *msg,
@@ -4364,7 +4428,8 @@ void nl80211_send_scan_start(struct cfg8
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
 }
 
 void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
@@ -4382,7 +4447,8 @@ void nl80211_send_scan_done(struct cfg80
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
 }
 
 void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
@@ -4400,7 +4466,8 @@ void nl80211_send_scan_aborted(struct cf
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_scan_mcgrp.id, GFP_KERNEL);
 }
 
 /*
@@ -4449,7 +4516,10 @@ void nl80211_send_reg_change_event(struc
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_KERNEL);
+	rtnl_lock();
+	genlmsg_multicast_allns(msg, 0, nl80211_regulatory_mcgrp.id,
+				GFP_KERNEL);
+	rtnl_unlock();
 
 	return;
 
@@ -4485,7 +4555,8 @@ static void nl80211_send_mlme_event(stru
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4552,7 +4623,8 @@ static void nl80211_send_mlme_timeout(st
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4610,7 +4682,8 @@ void nl80211_send_connect_result(struct 
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4650,7 +4723,8 @@ void nl80211_send_roamed(struct cfg80211
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4690,7 +4764,8 @@ void nl80211_send_disconnected(struct cf
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, GFP_KERNEL);
 	return;
 
  nla_put_failure:
@@ -4725,7 +4800,8 @@ void nl80211_send_ibss_bssid(struct cfg8
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4765,7 +4841,8 @@ void nl80211_michael_mic_failure(struct 
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
 	return;
 
  nla_put_failure:
@@ -4818,7 +4895,10 @@ void nl80211_send_beacon_hint_event(stru
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_ATOMIC);
+	rcu_read_lock();
+	genlmsg_multicast_allns(msg, 0, nl80211_regulatory_mcgrp.id,
+				GFP_ATOMIC);
+	rcu_read_unlock();
 
 	return;
 
--- wireless-testing.orig/net/wireless/core.c	2009-07-14 00:30:01.000000000 +0200
+++ wireless-testing/net/wireless/core.c	2009-07-14 00:30:08.000000000 +0200
@@ -106,7 +106,7 @@ __cfg80211_rdev_from_info(struct genl_in
 
 	if (info->attrs[NL80211_ATTR_IFINDEX]) {
 		ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
-		dev = dev_get_by_index(&init_net, ifindex);
+		dev = dev_get_by_index(genl_info_net(info), ifindex);
 		if (dev) {
 			if (dev->ieee80211_ptr)
 				byifidx =
@@ -151,13 +151,13 @@ cfg80211_get_dev_from_info(struct genl_i
 }
 
 struct cfg80211_registered_device *
-cfg80211_get_dev_from_ifindex(int ifindex)
+cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
 {
 	struct cfg80211_registered_device *rdev = ERR_PTR(-ENODEV);
 	struct net_device *dev;
 
 	mutex_lock(&cfg80211_mutex);
-	dev = dev_get_by_index(&init_net, ifindex);
+	dev = dev_get_by_index(net, ifindex);
 	if (!dev)
 		goto out;
 	if (dev->ieee80211_ptr) {
@@ -222,6 +222,42 @@ int cfg80211_dev_rename(struct cfg80211_
 	return 0;
 }
 
+int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
+			  struct net *net)
+{
+	struct wireless_dev *wdev;
+	int err = 0;
+
+	if (!rdev->wiphy.netnsok)
+		return -EOPNOTSUPP;
+
+	list_for_each_entry(wdev, &rdev->netdev_list, list) {
+		wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
+		err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
+		if (err)
+			break;
+		wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
+	}
+
+	if (err) {
+		/* failed -- clean up to old netns */
+		net = wiphy_net(&rdev->wiphy);
+
+		list_for_each_entry_continue_reverse(wdev, &rdev->netdev_list,
+						     list) {
+			wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
+			err = dev_change_net_namespace(wdev->netdev, net,
+							"wlan%d");
+			WARN_ON(err);
+			wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
+		}
+	}
+
+	wiphy_net_set(&rdev->wiphy, net);
+
+	return err;
+}
+
 static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
 {
 	struct cfg80211_registered_device *rdev = data;
@@ -375,6 +411,8 @@ struct wiphy *wiphy_new(const struct cfg
 	rdev->wiphy.dev.class = &ieee80211_class;
 	rdev->wiphy.dev.platform_data = rdev;
 
+	wiphy_net_set(&rdev->wiphy, &init_net);
+
 	rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
 	rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
 				   &rdev->wiphy.dev, RFKILL_TYPE_WLAN,
@@ -615,6 +653,9 @@ static int cfg80211_netdev_notifier_call
 		spin_lock_init(&wdev->event_lock);
 		mutex_lock(&rdev->devlist_mtx);
 		list_add(&wdev->list, &rdev->netdev_list);
+		/* can only change netns with wiphy */
+		dev->features |= NETIF_F_NETNS_LOCAL;
+
 		if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
 				      "phy80211")) {
 			printk(KERN_ERR "wireless: failed to add phy80211 "
@@ -705,10 +746,32 @@ static struct notifier_block cfg80211_ne
 	.notifier_call = cfg80211_netdev_notifier_call,
 };
 
-static int cfg80211_init(void)
+static void __net_exit cfg80211_pernet_exit(struct net *net)
+{
+	struct cfg80211_registered_device *rdev;
+
+	rtnl_lock();
+	mutex_lock(&cfg80211_mutex);
+	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+		if (net_eq(wiphy_net(&rdev->wiphy), net))
+			WARN_ON(cfg80211_switch_netns(rdev, &init_net));
+	}
+	mutex_unlock(&cfg80211_mutex);
+	rtnl_unlock();
+}
+
+static struct pernet_operations cfg80211_pernet_ops = {
+	.exit = cfg80211_pernet_exit,
+};
+
+static int __init cfg80211_init(void)
 {
 	int err;
 
+	err = register_pernet_device(&cfg80211_pernet_ops);
+	if (err)
+		goto out_fail_pernet;
+
 	err = wiphy_sysfs_init();
 	if (err)
 		goto out_fail_sysfs;
@@ -736,9 +799,10 @@ out_fail_nl80211:
 out_fail_notifier:
 	wiphy_sysfs_exit();
 out_fail_sysfs:
+	unregister_pernet_device(&cfg80211_pernet_ops);
+out_fail_pernet:
 	return err;
 }
-
 subsys_initcall(cfg80211_init);
 
 static void cfg80211_exit(void)
@@ -748,5 +812,6 @@ static void cfg80211_exit(void)
 	unregister_netdevice_notifier(&cfg80211_netdev_notifier);
 	wiphy_sysfs_exit();
 	regulatory_exit();
+	unregister_pernet_device(&cfg80211_pernet_ops);
 }
 module_exit(cfg80211_exit);
--- wireless-testing.orig/net/wireless/scan.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/wireless/scan.c	2009-07-14 00:30:08.000000000 +0200
@@ -32,9 +32,7 @@ void __cfg80211_scan_done(struct work_st
 	mutex_lock(&rdev->mtx);
 	request = rdev->scan_req;
 
-	dev = dev_get_by_index(&init_net, request->ifidx);
-	if (!dev)
-		goto out;
+	dev = request->dev;
 
 	/*
 	 * This must be before sending the other events!
@@ -60,24 +58,16 @@ void __cfg80211_scan_done(struct work_st
 
 	dev_put(dev);
 
- out:
 	cfg80211_unlock_rdev(rdev);
 	kfree(request);
 }
 
 void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 {
-	struct net_device *dev = dev_get_by_index(&init_net, request->ifidx);
-	if (WARN_ON(!dev)) {
-		kfree(request);
-		return;
-	}
-
 	WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
 
 	request->aborted = aborted;
 	schedule_work(&wiphy_to_dev(request->wiphy)->scan_done_wk);
-	dev_put(dev);
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
 
@@ -593,7 +583,7 @@ int cfg80211_wext_siwscan(struct net_dev
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
-	rdev = cfg80211_get_dev_from_ifindex(dev->ifindex);
+	rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
 
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
@@ -618,7 +608,7 @@ int cfg80211_wext_siwscan(struct net_dev
 	}
 
 	creq->wiphy = wiphy;
-	creq->ifidx = dev->ifindex;
+	creq->dev = dev;
 	creq->ssids = (void *)(creq + 1);
 	creq->channels = (void *)(creq->ssids + 1);
 	creq->n_channels = n_channels;
@@ -655,8 +645,10 @@ int cfg80211_wext_siwscan(struct net_dev
 	if (err) {
 		rdev->scan_req = NULL;
 		kfree(creq);
-	} else
+	} else {
 		nl80211_send_scan_start(rdev, dev);
+		dev_hold(dev);
+	}
  out:
 	cfg80211_unlock_rdev(rdev);
 	return err;
@@ -949,7 +941,7 @@ int cfg80211_wext_giwscan(struct net_dev
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
-	rdev = cfg80211_get_dev_from_ifindex(dev->ifindex);
+	rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
 
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
--- wireless-testing.orig/include/linux/nl80211.h	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/include/linux/nl80211.h	2009-07-14 00:30:08.000000000 +0200
@@ -262,6 +262,9 @@
  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
  *	%NL80211_ATTR_REASON_CODE attributes are used.
  *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ *	associated with this wiphy must be down and will follow.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -336,6 +339,8 @@ enum nl80211_commands {
 	NL80211_CMD_ROAM,
 	NL80211_CMD_DISCONNECT,
 
+	NL80211_CMD_SET_WIPHY_NETNS,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -573,6 +578,8 @@ enum nl80211_commands {
  *	and join_ibss(), key information is in a nested attribute each
  *	with %NL80211_KEY_* sub-attributes
  *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -701,6 +708,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_KEY,
 	NL80211_ATTR_KEYS,
 
+	NL80211_ATTR_PID,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
--- wireless-testing.orig/net/core/dev.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/core/dev.c	2009-07-14 00:30:08.000000000 +0200
@@ -5344,6 +5344,7 @@ int dev_change_net_namespace(struct net_
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(dev_change_net_namespace);
 
 static int dev_cpu_callback(struct notifier_block *nfb,
 			    unsigned long action,
--- wireless-testing.orig/net/wireless/sme.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/wireless/sme.c	2009-07-14 00:30:08.000000000 +0200
@@ -86,7 +86,7 @@ static int cfg80211_conn_scan(struct wir
 		wdev->conn->params.ssid_len);
 	request->ssids[0].ssid_len = wdev->conn->params.ssid_len;
 
-	request->ifidx = wdev->netdev->ifindex;
+	request->dev = wdev->netdev;
 	request->wiphy = &rdev->wiphy;
 
 	rdev->scan_req = request;
@@ -95,6 +95,7 @@ static int cfg80211_conn_scan(struct wir
 	if (!err) {
 		wdev->conn->state = CFG80211_CONN_SCANNING;
 		nl80211_send_scan_start(rdev, wdev->netdev);
+		dev_hold(wdev->netdev);
 	} else {
 		rdev->scan_req = NULL;
 		kfree(request);
--- wireless-testing.orig/net/wireless/core.h	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/wireless/core.h	2009-07-14 00:30:08.000000000 +0200
@@ -170,7 +170,10 @@ struct wiphy *wiphy_idx_to_wiphy(int wip
 
 /* identical to cfg80211_get_dev_from_info but only operate on ifindex */
 extern struct cfg80211_registered_device *
-cfg80211_get_dev_from_ifindex(int ifindex);
+cfg80211_get_dev_from_ifindex(struct net *net, int ifindex);
+
+int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
+			  struct net *net);
 
 static inline void cfg80211_lock_rdev(struct cfg80211_registered_device *rdev)
 {

-- 


^ permalink raw reply

* [PATCH 1/3] mac80211: cooperate more with network namespaces
From: Johannes Berg @ 2009-07-13 22:33 UTC (permalink / raw)
  To: John Linville; +Cc: linux-wireless
In-Reply-To: <20090713223333.042733013@sipsolutions.net>

There are still two places in mac80211 that hardcode
the initial net namespace (init_net). One of them is
mandated by cfg80211 and will be removed by a separate
patch, the other one is used for finding the network
device of a pending packet via its ifindex.

Remove the latter use by keeping track of the device
pointer itself, via the vif pointer, and avoid it
going stale by dropping pending frames for a given
interface when the interface is removed.

To keep track of the vif pointer for the correct
interface, change the info->control.vif pointer's
internal use to always be the correct vif, and only
move it to the vif the driver expects (or NULL for
monitor interfaces and injected packets) right before
giving the packet to the driver.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
---
 net/mac80211/iface.c |   16 ++++++++++
 net/mac80211/rx.c    |    2 -
 net/mac80211/tx.c    |   75 ++++++++++++++++++++-------------------------------
 3 files changed, 46 insertions(+), 47 deletions(-)

--- wireless-testing.orig/net/mac80211/iface.c	2009-07-14 00:29:58.000000000 +0200
+++ wireless-testing/net/mac80211/iface.c	2009-07-14 00:30:05.000000000 +0200
@@ -335,7 +335,10 @@ static int ieee80211_stop(struct net_dev
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_init_conf conf;
 	struct sta_info *sta;
+	unsigned long flags;
+	struct sk_buff *skb, *tmp;
 	u32 hw_reconf_flags = 0;
+	int i;
 
 	/*
 	 * Stop TX on this interface first.
@@ -551,6 +554,18 @@ static int ieee80211_stop(struct net_dev
 	if (hw_reconf_flags)
 		ieee80211_hw_config(local, hw_reconf_flags);
 
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
+		skb_queue_walk_safe(&local->pending[i], skb, tmp) {
+			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+			if (info->control.vif == &sdata->vif) {
+				__skb_unlink(skb, &local->pending[i]);
+				dev_kfree_skb_irq(skb);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
 	return 0;
 }
 
@@ -788,7 +803,6 @@ int ieee80211_if_add(struct ieee80211_lo
 
 	memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
-	ndev->features |= NETIF_F_NETNS_LOCAL;
 
 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
 	sdata = netdev_priv(ndev);
--- wireless-testing.orig/net/mac80211/tx.c	2009-07-14 00:29:55.000000000 +0200
+++ wireless-testing/net/mac80211/tx.c	2009-07-14 00:30:05.000000000 +0200
@@ -400,6 +400,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
 			sta_info_set_tim_bit(sta);
 
 		info->control.jiffies = jiffies;
+		info->control.vif = &tx->sdata->vif;
 		info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 		skb_queue_tail(&sta->ps_tx_buf, tx->skb);
 		return TX_QUEUED;
@@ -676,7 +677,7 @@ ieee80211_tx_h_sequence(struct ieee80211
 	 * number, if we have no matching interface then we
 	 * neither assign one ourselves nor ask the driver to.
 	 */
-	if (unlikely(!info->control.vif))
+	if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR))
 		return TX_CONTINUE;
 
 	if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
@@ -1071,6 +1072,7 @@ ieee80211_tx_prepare(struct ieee80211_su
 		} else if (*state != HT_AGG_STATE_IDLE) {
 			/* in progress */
 			queued = true;
+			info->control.vif = &sdata->vif;
 			info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 			__skb_queue_tail(&tid_tx->pending, skb);
 		}
@@ -1122,6 +1124,7 @@ static int __ieee80211_tx(struct ieee802
 {
 	struct sk_buff *skb = *skbp, *next;
 	struct ieee80211_tx_info *info;
+	struct ieee80211_sub_if_data *sdata;
 	unsigned long flags;
 	int ret, len;
 	bool fragm = false;
@@ -1146,7 +1149,24 @@ static int __ieee80211_tx(struct ieee802
 
 		next = skb->next;
 		len = skb->len;
+
+		sdata = vif_to_sdata(info->control.vif);
+
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_MONITOR:
+			info->control.vif = NULL;
+			break;
+		case NL80211_IFTYPE_AP_VLAN:
+			info->control.vif = &container_of(sdata->bss,
+				struct ieee80211_sub_if_data, u.ap)->vif;
+			break;
+		default:
+			/* keep */
+			break;
+		}
+
 		ret = drv_tx(local, skb);
+		info->control.vif = &sdata->vif;
 		if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
 			dev_kfree_skb(skb);
 			ret = NETDEV_TX_OK;
@@ -1365,11 +1385,6 @@ static void ieee80211_xmit(struct ieee80
 	struct ieee80211_sub_if_data *tmp_sdata;
 	int headroom;
 	bool may_encrypt;
-	enum {
-		NOT_MONITOR,
-		FOUND_SDATA,
-		UNKNOWN_ADDRESS,
-	} monitor_iface = NOT_MONITOR;
 
 	dev_hold(sdata->dev);
 
@@ -1403,7 +1418,6 @@ static void ieee80211_xmit(struct ieee80
 		u16 len_rthdr;
 
 		info->flags |= IEEE80211_TX_CTL_INJECTED;
-		monitor_iface = UNKNOWN_ADDRESS;
 
 		len_rthdr = ieee80211_get_radiotap_len(skb->data);
 		hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
@@ -1433,7 +1447,6 @@ static void ieee80211_xmit(struct ieee80
 					dev_hold(tmp_sdata->dev);
 					dev_put(sdata->dev);
 					sdata = tmp_sdata;
-					monitor_iface = FOUND_SDATA;
 					break;
 				}
 			}
@@ -1455,13 +1468,7 @@ static void ieee80211_xmit(struct ieee80
 		return;
 	}
 
-	tmp_sdata = sdata;
-	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-		tmp_sdata = container_of(sdata->bss,
-					 struct ieee80211_sub_if_data,
-					 u.ap);
-	if (likely(monitor_iface != UNKNOWN_ADDRESS))
-		info->control.vif = &tmp_sdata->vif;
+	info->control.vif = &sdata->vif;
 
 	ieee80211_select_queue(local, skb);
 	ieee80211_tx(sdata, skb, false);
@@ -1513,9 +1520,6 @@ int ieee80211_monitor_start_xmit(struct 
 	if (unlikely(skb->len < len_rthdr))
 		goto fail; /* skb too short for claimed rt header extent */
 
-	/* needed because we set skb device to master */
-	skb->iif = dev->ifindex;
-
 	/*
 	 * fix up the pointers accounting for the radiotap
 	 * header still being in there.  We are being given
@@ -1789,8 +1793,6 @@ int ieee80211_subif_start_xmit(struct sk
 	nh_pos += hdrlen;
 	h_pos += hdrlen;
 
-	skb->iif = dev->ifindex;
-
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
@@ -1835,32 +1837,13 @@ static bool ieee80211_tx_pending_skb(str
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	struct ieee80211_hdr *hdr;
-	struct net_device *dev;
 	int ret;
 	bool result = true;
 
-	/* does interface still exist? */
-	dev = dev_get_by_index(&init_net, skb->iif);
-	if (!dev) {
-		dev_kfree_skb(skb);
-		return true;
-	}
-
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-		sdata = container_of(sdata->bss,
-				     struct ieee80211_sub_if_data,
-				     u.ap);
-
-	if (unlikely(info->control.vif && info->control.vif != &sdata->vif)) {
-		dev_kfree_skb(skb);
-		result = true;
-		goto out;
-	}
+	sdata = vif_to_sdata(info->control.vif);
 
 	if (info->flags & IEEE80211_TX_INTFL_NEED_TXPROCESSING) {
-		/* do not use sdata, it may have been changed above */
-		ieee80211_tx(IEEE80211_DEV_TO_SUB_IF(dev), skb, true);
+		ieee80211_tx(sdata, skb, true);
 	} else {
 		hdr = (struct ieee80211_hdr *)skb->data;
 		sta = sta_info_get(local, hdr->addr1);
@@ -1870,9 +1853,6 @@ static bool ieee80211_tx_pending_skb(str
 			result = false;
 	}
 
- out:
-	dev_put(dev);
-
 	return result;
 }
 
@@ -1900,10 +1880,16 @@ void ieee80211_tx_pending(unsigned long 
 
 		while (!skb_queue_empty(&local->pending[i])) {
 			struct sk_buff *skb = __skb_dequeue(&local->pending[i]);
+			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+			struct ieee80211_sub_if_data *sdata;
+
+			sdata = vif_to_sdata(info->control.vif);
+			dev_hold(sdata->dev);
 			spin_unlock_irqrestore(&local->queue_stop_reason_lock,
 						flags);
 
 			txok = ieee80211_tx_pending_skb(local, skb);
+			dev_put(sdata->dev);
 			if (!txok)
 				__skb_queue_head(&local->pending[i], skb);
 			spin_lock_irqsave(&local->queue_stop_reason_lock,
@@ -2211,7 +2197,6 @@ void ieee80211_tx_skb(struct ieee80211_s
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	skb->iif = sdata->dev->ifindex;
 	if (!encrypt)
 		info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
 
--- wireless-testing.orig/net/mac80211/rx.c	2009-07-14 00:29:56.000000000 +0200
+++ wireless-testing/net/mac80211/rx.c	2009-07-14 00:30:05.000000000 +0200
@@ -1539,7 +1539,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
 			info = IEEE80211_SKB_CB(fwd_skb);
 			memset(info, 0, sizeof(*info));
 			info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
-			fwd_skb->iif = rx->dev->ifindex;
+			info->control.vif = &rx->sdata->vif;
 			ieee80211_select_queue(local, fwd_skb);
 			if (is_multicast_ether_addr(fwd_hdr->addr3))
 				memcpy(fwd_hdr->addr1, fwd_hdr->addr3,

-- 


^ permalink raw reply

page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox