* [PATCH 2/4] mac80211_hwsim: claim uAPSD support
From: Johannes Berg @ 2013-07-14 20:57 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg
In-Reply-To: <1373835442-3322-1-git-send-email-johannes@sipsolutions.net>
From: Johannes Berg <johannes.berg@intel.com>
Since mac80211 does everything, we can just claim it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
drivers/net/wireless/mac80211_hwsim.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 11adae8..0a439f8 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2309,7 +2309,8 @@ static int __init init_mac80211_hwsim(void)
hw->flags |= IEEE80211_HW_SUPPORTS_RC_TABLE;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
- WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
+ WIPHY_FLAG_AP_UAPSD;
/* ask mac80211 to reserve space for magic */
hw->vif_data_size = sizeof(struct hwsim_vif_priv);
--
1.8.0
^ permalink raw reply related
* [PATCH 1/4] mac80211_hwsim: use ieee80211_free_txskb
From: Johannes Berg @ 2013-07-14 20:57 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
These are only strange error cases, so it's not really
all that important, but the driver really should use
ieee80211_free_tx_skb instead of just dev_kfree_skb.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
drivers/net/wireless/mac80211_hwsim.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index cb34c78..11adae8 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -867,7 +867,7 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
if (WARN_ON(skb->len < 10)) {
/* Should not happen; just a sanity check for addr1 use */
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(hw, skb);
return;
}
@@ -884,13 +884,13 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
}
if (WARN(!channel, "TX w/o channel - queue = %d\n", txi->hw_queue)) {
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(hw, skb);
return;
}
if (data->idle && !data->tmp_chan) {
wiphy_debug(hw->wiphy, "Trying to TX when idle - reject\n");
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(hw, skb);
return;
}
--
1.8.0
^ permalink raw reply related
* [3.10.1] strange kernel crash after thousands suspend-resume cycles
From: Konstantin Khlebnikov @ 2013-07-14 19:38 UTC (permalink / raw)
To: linux-kernel@vger.kernel.org, Tomas Winkler, linux-wireless
first and only warning had happened here:
Jul 14 20:42:50 zurg kernel: [ 225.991608] ------------[ cut here ]------------
Jul 14 20:42:50 zurg kernel: [ 225.991613] WARNING: at net/mac80211/pm.c:113 __ieee80211_suspend+0x6ad/0x6d0()
Jul 14 20:42:50 zurg kernel: [ 225.991633] Modules linked in: iwldvm iwlwifi nfsd auth_rpcgss oid_registry nfs_acl nfs
lockd sunrpc bridge stp llc tun fuse snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm snd_page_alloc thinkpad_acpi snd_seq_midi snd_seq_midi_event iTCO_wdt snd_rawmidi intel_powerclamp coretemp
hid_logitech_dj cdc_ncm uvcvideo kvm_intel kvm usbnet videobuf2_vmalloc videobuf2_memops mii videobuf2_core videodev
cdc_wdm cdc_acm snd_seq snd_seq_device snd_timer i915 snd soundcore lpc_ich mfd_core wmi drm_kms_helper sdhci_pci sdhci
e1000e ptp
Jul 14 20:42:50 zurg kernel: [ 225.991635] CPU: 0 PID: 4940 Comm: pm-suspend Not tainted 3.10.1-zurg-00001-gaa457b5 #107
Jul 14 20:42:50 zurg kernel: [ 225.991636] Hardware name: LENOVO 4291QY6/4291QY6, BIOS 8DET51WW (1.21 ) 08/02/2011
Jul 14 20:42:50 zurg kernel: [ 225.991637] 0000000000000009 ffff8803f5761c40 ffffffff81621b62 ffff8803f5761c78
Jul 14 20:42:50 zurg kernel: [ 225.991638] ffffffff8104e8b1 ffff880405560640 0000000000000000 ffff8804055612f8
Jul 14 20:42:50 zurg kernel: [ 225.991639] ffff8804055612f8 ffff880405560860 ffff8803f5761c88 ffffffff8104e98a
Jul 14 20:42:50 zurg kernel: [ 225.991640] Call Trace:
Jul 14 20:42:50 zurg kernel: [ 225.991643] [<ffffffff81621b62>] dump_stack+0x19/0x1b
Jul 14 20:42:50 zurg kernel: [ 225.991646] [<ffffffff8104e8b1>] warn_slowpath_common+0x61/0x80
Jul 14 20:42:50 zurg kernel: [ 225.991647] [<ffffffff8104e98a>] warn_slowpath_null+0x1a/0x20
Jul 14 20:42:50 zurg kernel: [ 225.991648] [<ffffffff815fefad>] __ieee80211_suspend+0x6ad/0x6d0
Jul 14 20:42:50 zurg kernel: [ 225.991651] [<ffffffff815d1a5a>] ieee80211_suspend+0x1a/0x30
Jul 14 20:42:50 zurg kernel: [ 225.991653] [<ffffffff8157ee87>] wiphy_suspend+0x77/0x200
Jul 14 20:42:50 zurg kernel: [ 225.991654] [<ffffffff8157ee10>] ? addresses_show+0xa0/0xa0
Jul 14 20:42:50 zurg kernel: [ 225.991656] [<ffffffff816220dc>] legacy_suspend+0x28/0x60
Jul 14 20:42:50 zurg kernel: [ 225.991659] [<ffffffff81350816>] __device_suspend+0x2c6/0x330
Jul 14 20:42:50 zurg kernel: [ 225.991660] [<ffffffff813520c8>] dpm_suspend+0x58/0x220
Jul 14 20:42:50 zurg kernel: [ 225.991661] [<ffffffff813524d7>] dpm_suspend_start+0x57/0x60
Jul 14 20:42:50 zurg kernel: [ 225.991663] [<ffffffff8108e2e0>] suspend_devices_and_enter+0x70/0x480
Jul 14 20:42:50 zurg kernel: [ 225.991665] [<ffffffff8108e868>] pm_suspend+0x178/0x260
Jul 14 20:42:50 zurg kernel: [ 225.991666] [<ffffffff8108d7b5>] state_store+0x75/0xf0
Jul 14 20:42:50 zurg kernel: [ 225.991668] [<ffffffff8124856f>] kobj_attr_store+0xf/0x20
Jul 14 20:42:50 zurg kernel: [ 225.991670] [<ffffffff81197ff3>] sysfs_write_file+0xd3/0x150
Jul 14 20:42:50 zurg kernel: [ 225.991673] [<ffffffff811306d9>] vfs_write+0xb9/0x1c0
Jul 14 20:42:50 zurg kernel: [ 225.991674] [<ffffffff81130fe9>] SyS_write+0x49/0xa0
Jul 14 20:42:50 zurg kernel: [ 225.991677] [<ffffffff81630919>] system_call_fastpath+0x16/0x1b
Jul 14 20:42:50 zurg kernel: [ 225.991678] ---[ end trace 996fb345fab7f015 ]---
after that kernel has worked fine for a hour and has done thousands s2ram suspend-resume cycles
but 'mei_me' has started generating endless noise...
Jul 14 21:52:28 zurg kernel: [ 2749.332358] cfg80211: Regulatory domain changed to country: RU
Jul 14 21:52:28 zurg kernel: [ 2749.332368] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 21:52:28 zurg kernel: [ 2749.332373] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 21:52:28 zurg kernel: [ 2749.332378] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
Jul 14 21:52:29 zurg kernel: [ 2749.928395] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Jul 14 21:52:35 zurg kernel: [ 2755.840385] IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
Jul 14 21:52:54 zurg kernel: [ 2775.005762] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.007722] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.011081] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.011534] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.011560] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.011752] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.013369] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.013731] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.013756] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.013980] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.014346] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.014666] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.014710] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.014906] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.015319] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.015720] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.015746] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.015934] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 21:52:54 zurg kernel: [ 2775.016381] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
a lot of noise:
blind@zurg:~/src/linux$ sudo grep -c 'unexpected reset' /var/log/messages
161627
Jul 14 22:02:27 zurg kernel: [ 3347.409622] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:02:57 zurg kernel: [ 3377.430828] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:03:27 zurg kernel: [ 3407.451988] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:03:57 zurg kernel: [ 3437.473180] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:04:27 zurg kernel: [ 3467.494366] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:04:30 zurg kernel: [ 3470.587230] cfg80211: Calling CRDA to update world regulatory domain
Jul 14 22:04:30 zurg kernel: [ 3470.595539] cfg80211: World regulatory domain updated:
Jul 14 22:04:30 zurg kernel: [ 3470.595549] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:04:30 zurg kernel: [ 3470.595555] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.595559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.595563] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.595567] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.595570] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.595595] cfg80211: Calling CRDA for country: GB
Jul 14 22:04:30 zurg kernel: [ 3470.605175] cfg80211: Regulatory domain changed to country: GB
Jul 14 22:04:30 zurg kernel: [ 3470.605185] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:04:30 zurg kernel: [ 3470.605191] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.605195] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.605198] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.605202] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jul 14 22:04:30 zurg kernel: [ 3470.605205] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jul 14 22:04:33 zurg kernel: [ 3473.271126] wlan0: authenticate with 48:5d:60:e1:76:0e
Jul 14 22:04:33 zurg kernel: [ 3473.272752] wlan0: send auth to 48:5d:60:e1:76:0e (try 1/3)
Jul 14 22:04:33 zurg kernel: [ 3473.275101] wlan0: authenticated
Jul 14 22:04:33 zurg kernel: [ 3473.275877] wlan0: associate with 48:5d:60:e1:76:0e (try 1/3)
Jul 14 22:04:33 zurg kernel: [ 3473.279186] wlan0: RX AssocResp from 48:5d:60:e1:76:0e (capab=0x411 status=0 aid=3)
Jul 14 22:04:33 zurg kernel: [ 3473.285250] wlan0: associated
Jul 14 22:04:33 zurg kernel: [ 3473.285307] cfg80211: Calling CRDA for country: RU
Jul 14 22:04:33 zurg kernel: [ 3473.288113] cfg80211: Regulatory domain changed to country: RU
Jul 14 22:04:33 zurg kernel: [ 3473.288116] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:04:33 zurg kernel: [ 3473.288117] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:04:33 zurg kernel: [ 3473.288118] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
Jul 14 22:04:57 zurg kernel: [ 3497.515565] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:05:27 zurg kernel: [ 3527.536767] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:05:57 zurg kernel: [ 3557.557918] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:06:27 zurg kernel: [ 3587.579166] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:06:57 zurg kernel: [ 3617.600307] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:07:27 zurg kernel: [ 3647.621479] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:07:58 zurg kernel: [ 3677.642714] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:08:28 zurg kernel: [ 3707.663909] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:08:30 zurg kernel: [ 3710.269613] cfg80211: Calling CRDA to update world regulatory domain
Jul 14 22:08:30 zurg kernel: [ 3710.278641] cfg80211: World regulatory domain updated:
Jul 14 22:08:30 zurg kernel: [ 3710.278651] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:08:30 zurg kernel: [ 3710.278657] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.278661] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.278665] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.278669] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.278673] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.278699] cfg80211: Calling CRDA for country: GB
Jul 14 22:08:30 zurg kernel: [ 3710.287280] cfg80211: Regulatory domain changed to country: GB
Jul 14 22:08:30 zurg kernel: [ 3710.287290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:08:30 zurg kernel: [ 3710.287295] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.287299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.287302] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.287306] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jul 14 22:08:30 zurg kernel: [ 3710.287310] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jul 14 22:08:33 zurg kernel: [ 3712.911957] wlan0: send auth to 48:5d:60:e1:76:0e (try 1/3)
Jul 14 22:08:33 zurg kernel: [ 3712.914326] wlan0: authenticated
Jul 14 22:08:33 zurg kernel: [ 3712.915010] wlan0: associate with 48:5d:60:e1:76:0e (try 1/3)
Jul 14 22:08:33 zurg kernel: [ 3712.923070] wlan0: RX AssocResp from 48:5d:60:e1:76:0e (capab=0x411 status=0 aid=3)
Jul 14 22:08:33 zurg kernel: [ 3712.931781] wlan0: associated
Jul 14 22:08:33 zurg kernel: [ 3712.931831] cfg80211: Calling CRDA for country: RU
Jul 14 22:08:33 zurg kernel: [ 3712.934361] cfg80211: Regulatory domain changed to country: RU
Jul 14 22:08:33 zurg kernel: [ 3712.934364] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jul 14 22:08:33 zurg kernel: [ 3712.934366] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jul 14 22:08:33 zurg kernel: [ 3712.934367] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
Jul 14 22:08:58 zurg kernel: [ 3737.685081] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:09:28 zurg kernel: [ 3767.706178] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:09:58 zurg kernel: [ 3797.727380] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:10:28 zurg kernel: [ 3827.748601] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:10:58 zurg kernel: [ 3857.769825] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:11:28 zurg kernel: [ 3887.791017] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:11:58 zurg kernel: [ 3917.812199] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:12:28 zurg kernel: [ 3947.833375] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:12:58 zurg kernel: [ 3977.854562] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:13:28 zurg kernel: [ 4007.875742] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:13:58 zurg kernel: [ 4037.896935] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:14:28 zurg kernel: [ 4067.918110] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:14:58 zurg kernel: [ 4097.939255] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:15:28 zurg kernel: [ 4127.960477] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:44:02 zurg kernel: [ 5839.167859] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:44:32 zurg kernel: [ 5869.189072] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:45:02 zurg kernel: [ 5899.210281] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:45:32 zurg kernel: [ 5929.231465] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:46:02 zurg kernel: [ 5959.252640] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:46:32 zurg kernel: [ 5989.273833] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:47:02 zurg kernel: [ 6019.295021] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:47:32 zurg kernel: [ 6049.316202] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:48:02 zurg kernel: [ 6079.337392] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:48:32 zurg kernel: [ 6109.358577] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:49:02 zurg kernel: [ 6139.379733] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:49:33 zurg kernel: [ 6169.400920] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:50:03 zurg kernel: [ 6199.422111] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:50:33 zurg kernel: [ 6229.443292] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:51:03 zurg kernel: [ 6259.464476] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:51:33 zurg kernel: [ 6289.485675] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
Jul 14 22:52:03 zurg kernel: [ 6319.506868] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
soon after that kernel had crashed
[ 6349.664704] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[ 6349.664709] mei_me 0000:00:16.0: version message writet failed
[ 6349.664711] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[ 6349.664714] mei_me 0000:00:16.0: version message writet failed
[ 6349.664716] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[ 6349.664719] mei_me 0000:00:16.0: version message writet failed
[ 6349.988121] kernel tried to execute NX-protected page - exploit attempt? (uid: 1000)
[ 6349.988162] BUG: unable to handle kernel paging request at ffff88040b242000
[ 6349.988199] IP: [<ffff88040b242000>] 0xffff88040b241fff
[ 6349.988227] PGD 1ed4067 PUD 1ed7067 PMD 800000040b2001e3
[ 6349.988257] Oops: 0011 [#1] SMP
[ 6349.988276] Modules linked in: iwldvm iwlwifi nfsd auth_rpcgss oid_registry nfs_acl nfs lockd sunrpc bridge stp llc
tun fuse snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc
thinkpad_acpi snd_seq_midi snd_seq_midi_event iTCO_wdt snd_rawmidi intel_powerclamp coretemp hid_logitech_dj cdc_ncm
uvcvideo kvm_intel kvm usbnet videobuf2_vmalloc videobuf2_memops mii videobuf2_core videodev cdc_wdm cdc_acm snd_seq
snd_seq_device snd_timer i915 snd soundcore lpc_ich mfd_core wmi drm_kms_helper sdhci_pci sdhci e1000e ptp
[ 6349.988581] CPU: 3 PID: 5297 Comm: xfce4-panel Tainted: G W 3.10.1-zurg-00001-gaa457b5 #107
[ 6349.988622] Hardware name: LENOVO 4291QY6/4291QY6, BIOS 8DET51WW (1.21 ) 08/02/2011
[ 6349.988658] task: ffff88040a623e70 ti: ffff880409aec000 task.ti: ffff880409aec000
[ 6349.988691] RIP: 0010:[<ffff88040b242000>] [<ffff88040b242000>] 0xffff88040b241fff
[ 6349.988728] RSP: 0018:ffff880409aedb98 EFLAGS: 00010006
[ 6349.988752] RAX: ffff8803f554b120 RBX: 00000000f554b138 RCX: 00000000000000c3
[ 6349.988785] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8803f554b120
[ 6349.988816] RBP: ffff880409aedbd8 R08: 00000000000000c3 R09: 001300360002051e
[ 6349.988849] R10: 010043e70007033e R11: 0100003201000004 R12: ffff88040a84c8c8
[ 6349.988880] R13: ffff8803f554b148 R14: 0000000000000001 R15: 0000000000000001
[ 6349.988913] FS: 00007f3779c239c0(0000) GS:ffff88041e2c0000(0000) knlGS:0000000000000000
[ 6349.988949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6349.988975] CR2: ffff88040b242000 CR3: 000000040a390000 CR4: 00000000000407e0
[ 6349.989008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6349.989040] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6349.989071] Stack:
[ 6349.989082] ffffffff8107a7a8 0000000100000000 00000000000000c3 ffff88040a84c8c0
[ 6349.989121] 0000000000000001 0000000000000001 00000000000000c3 0000000000000286
[ 6349.989159] ffff880409aedc10 ffffffff8107b994 ffff880405458340 00000000000000e4
[ 6349.989198] Call Trace:
[ 6349.989215] [<ffffffff8107a7a8>] ? __wake_up_common+0x58/0x90
[ 6349.989244] [<ffffffff8107b994>] __wake_up_sync_key+0x44/0x60
[ 6349.989272] [<ffffffff8147b0da>] sock_def_readable+0x3a/0x70
[ 6349.989300] [<ffffffff8153c6a8>] unix_stream_sendmsg+0x1f8/0x3f0
[ 6349.989330] [<ffffffff81477a53>] sock_aio_write+0xe3/0x100
[ 6349.989357] [<ffffffff811300dc>] do_sync_readv_writev+0x6c/0xa0
[ 6349.989386] [<ffffffff8113138b>] do_readv_writev+0xbb/0x240
[ 6349.989414] [<ffffffff8147865d>] ? SYSC_recvfrom+0x10d/0x140
[ 6349.989441] [<ffffffff8113574f>] ? SYSC_newstat+0x2f/0x40
[ 6349.989468] [<ffffffff811315a5>] vfs_writev+0x35/0x60
[ 6349.989493] [<ffffffff811316b9>] SyS_writev+0x49/0xa0
[ 6349.989518] [<ffffffff811439e5>] ? SyS_poll+0x65/0x100
[ 6349.989545] [<ffffffff81630919>] system_call_fastpath+0x16/0x1b
[ 6349.989572] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 <00> 40 97 0b 04 88 ff ff 08 20 24 0b 04 88 ff ff 08 20 24 0b 04
[ 6349.989748] RIP [<ffff88040b242000>] 0xffff88040b241fff
[ 6349.989775] RSP <ffff880409aedb98>
[ 6349.989792] CR2: ffff88040b242000
There was only one mine patch for intel gpu (https://bugs.freedesktop.org/show_bug.cgi?id=54089)
^ permalink raw reply
* Re: Using CC BY-SA for wireless wiki content
From: Hauke Mehrtens @ 2013-07-14 19:29 UTC (permalink / raw)
To: Xose Vazquez Perez; +Cc: Luis R. Rodriguez, linux-wireless
In-Reply-To: <51E1B6BB.7060903@gmail.com>
On 07/13/2013 10:21 PM, Xose Vazquez Perez wrote:
> Luis R. Rodriguez wrote:
>
>> Anyone have any issues if we license the wiki content on
>> wireless.kernel.org under CC BY-SA license? That would make it
>> compatible with Wikipedia. Please shout out if you disagree with this
>> move as at this point we have random collaborations but at least as
>> per initial review it seems this would be a good idea. Want to see if
>> anyone disagrees before we do the move.
>
> No problem from my side.
>
>
> waiting for the rest of http://wireless.kernel.org/TrustedEditorsGroup
>
> JohannesBerg
> Zajec
> AlbertPool
> blubber
> SeanSantos
> Nick Lee
> HaukeMehrtens
I am fine with changing the License to CC BY-SA.
> gabs
> aspriel
> ChandrakantSharpa
> WimLewis
> PaterStein
> LarryFinger
> KalleValo
> Yuryu
> John Linville
> David Wang
> Christian Lamparter
> LucianoCoelho
> ZefirKurtisi
> nbd
> kevin
> BuZZ-dEE
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* Re: Using CC BY-SA for wireless wiki content
From: Xose Vazquez Perez @ 2013-07-14 18:58 UTC (permalink / raw)
To: Rafał Miłecki; +Cc: Luis R. Rodriguez, linux-wireless
In-Reply-To: <CACna6rzERC7AZrJwLp0oP5xpjuJqvbi6SqyQPj4rQvhWSB3rTQ@mail.gmail.com>
On 07/14/2013 07:45 PM, Rafał Miłecki wrote:
> According to the:
>> Please shout out if you disagree with this
>> move
>
> I believe some of us assumed:
> no shouting out == agreement
Yes.
But it is much better to be crystal clear about licenses issues.
^ permalink raw reply
* Re: Using CC BY-SA for wireless wiki content
From: Rafał Miłecki @ 2013-07-14 17:45 UTC (permalink / raw)
To: Xose Vazquez Perez; +Cc: Luis R. Rodriguez, linux-wireless
In-Reply-To: <51E1B6BB.7060903@gmail.com>
2013/7/13 Xose Vazquez Perez <xose.vazquez@gmail.com>:
> Luis R. Rodriguez wrote:
>
>> Anyone have any issues if we license the wiki content on
>> wireless.kernel.org under CC BY-SA license? That would make it
>> compatible with Wikipedia. Please shout out if you disagree with this
>> move as at this point we have random collaborations but at least as
>> per initial review it seems this would be a good idea. Want to see if
>> anyone disagrees before we do the move.
>
> No problem from my side.
>
>
> waiting for the rest of http://wireless.kernel.org/TrustedEditorsGroup
>
> JohannesBerg
> Zajec
According to the:
> Please shout out if you disagree with this
> move
I believe some of us assumed:
no shouting out == agreement
I'm totally OK with that.
--
Rafał
^ permalink raw reply
* Re: [PATCH 00/50] USB: cleanup spin_lock in URB->complete()
From: Ming Lei @ 2013-07-14 14:33 UTC (permalink / raw)
To: Andy Walls
Cc: Greg Kroah-Hartman, linux-usb, Oliver Neukum, Alan Stern,
linux-input, linux-bluetooth, netdev, linux-wireless, linux-media,
alsa-devel, linux-kernel
In-Reply-To: <1373807844.4998.10.camel@palomino.walls.org>
On Sun, Jul 14, 2013 at 9:17 PM, Andy Walls <awalls@md.metrocast.net> wrote:
> On Thu, 2013-07-11 at 17:05 +0800, Ming Lei wrote:
>> Hi,
>>
>> As we are going to run URB->complete() in tasklet context[1][2],
>
> Hi,
>
> Please pardon my naivete, but why was it decided to use tasklets to
> defer work, as opposed to some other deferred work mechanism?
>
> It seems to me that getting rid of tasklets has been an objective for
> years:
>
> http://lwn.net/Articles/239633/
> http://lwn.net/Articles/520076/
> http://lwn.net/Articles/240054/
We discussed the problem in the below link previously[1], Steven
and Thomas suggested to use threaded irq handler, but which
may degrade USB mass storage performance, so we have to
take tasklet now until we rewrite transport part of USB mass storage
driver.
Also the conversion[2] has avoided the tasklet spin lock problem
already.
[1], http://marc.info/?t=137079119200001&r=1&w=2
[2], http://marc.info/?l=linux-usb&m=137286326726326&w=2
Thanks,
--
Ming Lei
^ permalink raw reply
* Re: [PATCH 00/50] USB: cleanup spin_lock in URB->complete()
From: Andy Walls @ 2013-07-14 13:17 UTC (permalink / raw)
To: Ming Lei
Cc: Greg Kroah-Hartman, linux-usb, Oliver Neukum, Alan Stern,
linux-input, linux-bluetooth, netdev, linux-wireless, linux-media,
alsa-devel, linux-kernel
In-Reply-To: <1373533573-12272-1-git-send-email-ming.lei@canonical.com>
On Thu, 2013-07-11 at 17:05 +0800, Ming Lei wrote:
> Hi,
>
> As we are going to run URB->complete() in tasklet context[1][2],
Hi,
Please pardon my naivete, but why was it decided to use tasklets to
defer work, as opposed to some other deferred work mechanism?
It seems to me that getting rid of tasklets has been an objective for
years:
http://lwn.net/Articles/239633/
http://lwn.net/Articles/520076/
http://lwn.net/Articles/240054/
Regards,
Andy
> and
> hard interrupt may be enabled when running URB completion handler[3],
> so we might need to disable interrupt when acquiring one lock in
> the completion handler for the below reasons:
>
> - URB->complete() holds a subsystem wide lock which may be acquired
> in another hard irq context, and the subsystem wide lock is acquired
> by spin_lock()/read_lock()/write_lock() in complete()
>
> - URB->complete() holds a private lock with spin_lock()/read_lock()/write_lock()
> but driver may export APIs to make other drivers acquire the same private
> lock in its interrupt handler.
>
> For the sake of safety and making the change simple, this patch set
> converts all spin_lock()/read_lock()/write_lock() in completion handler
> path into their irqsave version mechanically.
>
> But if you are sure the above two cases do not happen in your driver,
> please let me know and I can drop the unnecessary change.
>
> Also if you find some conversions are missed, also please let me know so
> that I can add it in the next round.
>
>
> [1], http://marc.info/?l=linux-usb&m=137286322526312&w=2
> [2], http://marc.info/?l=linux-usb&m=137286326726326&w=2
> [3], http://marc.info/?l=linux-usb&m=137286330626363&w=2
>
[snip]
>
>
> Thanks,
> --
> Ming Lei
^ permalink raw reply
* RE: Firmware error for Centrino N 2230
From: Johannes Berg @ 2013-07-14 10:51 UTC (permalink / raw)
To: Cedric GROSS, Adrian Chadd
Cc: 'Emmanuel Grumbach', 'linux-wireless',
linux-wireless-owner
In-Reply-To: <000301ce8077$252f1830$6f8d4890$@info>
> Many many many thanks. I will check that tomorrow.
>
> FreeBSD driver for intel wireless card is a bit old and need a lot of
> improvement to manage new NIC.
> Is there a way to get all assert code meaning ? It could be really a
> big big
> help for me.
Unfortunately not, but have you seen the "iwl" FreeBSD driver that we
posted a while ago? That should help you some. Are you in contact with
anyone else maybe?
johannes
^ permalink raw reply
* RE: Firmware error for Centrino N 2230
From: Cedric GROSS @ 2013-07-14 9:47 UTC (permalink / raw)
To: 'Emmanuel Grumbach'; +Cc: 'linux-wireless'
In-Reply-To: <CANUX_P2K9_q_FnkzDrn4=Y3rzn3FvkPjCB4qGmts=7kni9oW4A@mail.gmail.com>
Hello Emmanuel,
> De : Emmanuel Grumbach [mailto:egrumbach@gmail.com]
> Envoyé : dimanche 14 juillet 2013 07:03
> À : sedat.dilek@gmail.com
> Cc : Cedric GROSS; linux-wireless
> Objet : Re: Firmware error for Centrino N 2230
>
> >>> > I’m trying to adapt current freebsd driver for supporting my 2230
> >>> NIC.
> >>> >
> >>> > I try to follow ucode command order defined in kernel 3.2 but I
> >>> > reach some difficulties because firmware raise error.
> >>> >
> >>> > Runtime uCode is alive. So far I sent calib result (cmd xB0),
> >>> > configured advanced BT coexistence (cmd x9B,xCC and xCD) running
> >>> > runtime calib (cmd
> >>> > x65) but the command configuring valid chain (cmd x65) failed as
> >>> > the result below :
>
> cmd 0x65? it is not valid chain command.
Yep was typo, it's 0x98.
>
> 1987 means that you haven't sent the Xtal calibration.
Many many many thanks. I will check that tomorrow.
FreeBSD driver for intel wireless card is a bit old and need a lot of
improvement to manage new NIC.
Is there a way to get all assert code meaning ? It could be really a big big
help for me.
Best regards
Cedric
^ permalink raw reply
* Re: Firmware error for Centrino N 2230
From: Emmanuel Grumbach @ 2013-07-14 5:03 UTC (permalink / raw)
To: sedat.dilek; +Cc: Cedric GROSS, linux-wireless
In-Reply-To: <CA+icZUX9jvAcvEkKSsN-KU2GWxPVGg9Z=soecwJtPL0soHD4Zw@mail.gmail.com>
>>> > I’m trying to adapt current freebsd driver for supporting my 2230
>>> NIC.
>>> >
>>> > I try to follow ucode command order defined in kernel 3.2 but I reach
>>> > some difficulties because firmware raise error.
>>> >
>>> > Runtime uCode is alive. So far I sent calib result (cmd xB0),
>>> > configured advanced BT coexistence (cmd x9B,xCC and xCD) running
>>> > runtime calib (cmd
>>> > x65) but the command configuring valid chain (cmd x65) failed as the
>>> > result below :
cmd 0x65? it is not valid chain command.
1987 means that you haven't sent the Xtal calibration.
^ permalink raw reply
* Re: Using CC BY-SA for wireless wiki content
From: John W. Linville @ 2013-07-13 22:57 UTC (permalink / raw)
To: Xose Vazquez Perez; +Cc: Luis R. Rodriguez, linux-wireless
In-Reply-To: <51E1B6BB.7060903@gmail.com>
On Sat, Jul 13, 2013 at 10:21:15PM +0200, Xose Vazquez Perez wrote:
> Luis R. Rodriguez wrote:
>
> > Anyone have any issues if we license the wiki content on
> > wireless.kernel.org under CC BY-SA license? That would make it
> > compatible with Wikipedia. Please shout out if you disagree with this
> > move as at this point we have random collaborations but at least as
> > per initial review it seems this would be a good idea. Want to see if
> > anyone disagrees before we do the move.
>
> No problem from my side.
>
>
> waiting for the rest of http://wireless.kernel.org/TrustedEditorsGroup
>
> JohannesBerg
> Zajec
> AlbertPool
> blubber
> SeanSantos
> Nick Lee
> HaukeMehrtens
> gabs
> aspriel
> ChandrakantSharpa
> WimLewis
> PaterStein
> LarryFinger
> KalleValo
> Yuryu
> John Linville
OK by me...
> David Wang
> Christian Lamparter
> LucianoCoelho
> ZefirKurtisi
> nbd
> kevin
> BuZZ-dEE
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply
* Re: New device for ar5523
From: Dmitry Zganyaiko @ 2013-07-13 21:18 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless
In-Reply-To: <51DC11F5.9080604@lwfinger.net>
Hi! Thank you, that's helped and after entering these commands device
began to work, but:
But after some network activity through this device (`apt-get update`
- about ~2-3 MB downloaded and that was about ~60 secs after
successful modprobe) interface was deleted with following logs in
dmesg:
[362.612028] usb 1-3: TX queue stuck (tot 2 pend 2)
[362.612036] usb 1-3: Will restart dongle
[362.612272] usb 1-3: USB disconnect, device number 3
[362.612769] wlan0: deauthenticating from 90:f6:52:c6:3c:eb by local
choice (reason=3)
... <some logs from cfg80211 module>
[363.108058] usb 1-3: new high-speed USB device number 6 using ehci-pci
[363.241150] usb 1-3: New USB device found, idVendor=07d1, idProduct=3a0d
[363.241157] usb 1-3: New USB device string: Mfr=1, Product=2, Serial Number = 3
... <just another device info>
[365.240030] usb 1-3: timeout waiting for command reply
[365.240038] usb 1-3: could not initialize adapter
[365.240263] usb 1-3: RX USB error -2.
[365.240271] usb 1-3: error -1 when submitting rx usb
[365.240334] ar5523: probe of 1-3:1.0 failed with error -110
Switching off and ejecting adapter doesn't help: the same error repeated:
> ar5523: probe of 1-3:1.0 failed with error -110
But I found that rebooting to Windows makes the adapter working. After
that I rebooted back to Linux and adapter began to work about ~60
secs, but after that the same situation as described above repeated.
Also I noted following: without rebooting to Windows - just after
rebooting Linux - adapter does not work: _only_ after rebooting to
Windows and only now back to Linux. Windows is doing something with
adapter I do not know what, but after that adapter works for about 1
minute and disconnected with logs above.
What can I do now to solve that problem?
Dmitry.
On Tue, Jul 9, 2013 at 4:36 PM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> On 07/09/2013 03:59 AM, Dmitry Zganyaiko wrote:
>>
>> Hi! I'm using usb wireless adaptor named
>> 07d1:3a0d D-Link System DWA-120 802.11g Wireless 108G (taken from lsusb)
>>
>> System is Debian wheezy with 3.8 kernel taken from ubuntu reps. But after
>> launch this adaptor doesn't work: no any new network interfaces is shown in
>> ifconfig.
>>
>> As far as I understood, such vendor:product (07d1:3a0d) isn't specified in
>> drivers/net/wireless/ath/ar5523/ar5523.c, and therefore the driver doesn't
>> recognise my device. Firmware 'ar5523.bin' is located in
>> /usr/local/lib/firmware.
>>
>> What can I do to make this adaptor work? Only add that v:p pair to
>> ar5523.c and recompile it? Just if that can be done without compiling - it
>> will be great.
>
>
> You can test to see if it works with that kernel with the following commands
> (as root):
>
> modprobe -v ar5523
> echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
>
> If the device would work by adding that USB ID to the device table, then the
> above commands should accomplish the same result. Note - these commands will
> need to be re-entered after every reload of ar5523.
>
> Larry
>
^ permalink raw reply
* Re: [PATCH] mac80211: fix duplicate retransmission detection
From: Johannes Berg @ 2013-07-13 20:37 UTC (permalink / raw)
To: Jason Andryuk; +Cc: linux-wireless@vger.kernel.org
In-Reply-To: <CAKf6xpu7iUSKWsFwsUnV2Nv2XjWepzaXv6s=3WvcgB6dY20oGQ@mail.gmail.com>
On Sat, 2013-07-13 at 12:28 -0400, Jason Andryuk wrote:
> > + if (rx->skb->len >= 24 && rx->sta &&
>
> Shouldn't this check rx->skb first?
> if (rx->sta && rx->sta->len >= 24 &&
Hmm? did you mean rx->skb? But what makes you think it can be NULL???
johannes
^ permalink raw reply
* Re: Using CC BY-SA for wireless wiki content
From: Xose Vazquez Perez @ 2013-07-13 20:21 UTC (permalink / raw)
To: Luis R. Rodriguez, linux-wireless
Luis R. Rodriguez wrote:
> Anyone have any issues if we license the wiki content on
> wireless.kernel.org under CC BY-SA license? That would make it
> compatible with Wikipedia. Please shout out if you disagree with this
> move as at this point we have random collaborations but at least as
> per initial review it seems this would be a good idea. Want to see if
> anyone disagrees before we do the move.
No problem from my side.
waiting for the rest of http://wireless.kernel.org/TrustedEditorsGroup
JohannesBerg
Zajec
AlbertPool
blubber
SeanSantos
Nick Lee
HaukeMehrtens
gabs
aspriel
ChandrakantSharpa
WimLewis
PaterStein
LarryFinger
KalleValo
Yuryu
John Linville
David Wang
Christian Lamparter
LucianoCoelho
ZefirKurtisi
nbd
kevin
BuZZ-dEE
^ permalink raw reply
* Re: [PATCH] mac80211: fix duplicate retransmission detection
From: Jason Andryuk @ 2013-07-13 16:28 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless@vger.kernel.org
In-Reply-To: <1373575017-25645-1-git-send-email-johannes@sipsolutions.net>
On Thu, Jul 11, 2013 at 4:36 PM, Johannes Berg
<johannes@sipsolutions.net> wrote:
> diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
> index 23dbcfc..2c5a79b 100644
> --- a/net/mac80211/rx.c
> +++ b/net/mac80211/rx.c
> @@ -936,8 +936,14 @@ ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
> struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
> struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
>
> - /* Drop duplicate 802.11 retransmissions (IEEE 802.11 Chap. 9.2.9) */
> - if (rx->sta && !is_multicast_ether_addr(hdr->addr1)) {
> + /*
> + * Drop duplicate 802.11 retransmissions
> + * (IEEE 802.11-2012: 9.3.2.10 "Duplicate detection and recovery")
> + */
> + if (rx->skb->len >= 24 && rx->sta &&
Shouldn't this check rx->skb first?
if (rx->sta && rx->sta->len >= 24 &&
-Jason
> + !ieee80211_is_ctl(hdr->frame_control) &&
> + !ieee80211_is_qos_nullfunc(hdr->frame_control) &&
> + !is_multicast_ether_addr(hdr->addr1)) {
> if (unlikely(ieee80211_has_retry(hdr->frame_control) &&
> rx->sta->last_seq_ctrl[rx->seqno_idx] ==
> hdr->seq_ctrl)) {
> --
> 1.8.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH] mwifiex: fix IRQ enable/disable
From: Daniel Drake @ 2013-07-13 14:57 UTC (permalink / raw)
To: linville, akarwar, bzhao; +Cc: linux-wireless
During tear down (e.g. mwifiex_sdio_remove during system suspend),
mwifiex left IRQs enabled for a significant period of time when it was
unable to handle them correctly. This caused interrupt storms and
interfered with the bluetooth interface on the same SDIO card.
Solve this by disabling interrupts at the point when they can no longer
be handled correctly, which is at the start of mwifiex_remove_card().
For cleanliness, we now enable interrupts in the mwifiex_add_card() path,
to be symmetrical with the disabling of interrupts. We also couple the
registration of the sdio IRQ handler with the actual enable/disable of
interrupts at the hardware level.
I also removed a write to this register in mwifiex_init_sdio which seemed
pointless and won't cause any ill effects now that we only register
the SDIO IRQ handler when we are ready to accept interrupts.
Includes some corrections from Amitkumar Karwar.
Signed-off-by: Daniel Drake <dsd@laptop.org>
---
drivers/net/wireless/mwifiex/init.c | 10 +---
drivers/net/wireless/mwifiex/main.c | 13 +++++-
drivers/net/wireless/mwifiex/main.h | 1 +
drivers/net/wireless/mwifiex/sdio.c | 91 +++++++++++++++++--------------------
drivers/net/wireless/mwifiex/sdio.h | 3 --
5 files changed, 57 insertions(+), 61 deletions(-)
Replaces the previous patch:
mwifiex: don't ignore SDIO interrupts during shutdown
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index caaf4bd..2cf8b96 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -693,7 +693,7 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
if (!ret) {
dev_notice(adapter->dev,
"WLAN FW already running! Skip FW dnld\n");
- goto done;
+ return 0;
}
poll_num = MAX_FIRMWARE_POLL_TRIES;
@@ -719,14 +719,8 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
poll_fw:
/* Check if the firmware is downloaded successfully or not */
ret = adapter->if_ops.check_fw_status(adapter, poll_num);
- if (ret) {
+ if (ret)
dev_err(adapter->dev, "FW failed to be active in time\n");
- return -1;
- }
-done:
- /* re-enable host interrupt for mwifiex after fw dnld is successful */
- if (adapter->if_ops.enable_int)
- adapter->if_ops.enable_int(adapter);
return ret;
}
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index e15ab72..1753431 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -427,6 +427,10 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
"Cal data request_firmware() failed\n");
}
+ /* enable host interrupt after fw dnld is successful */
+ if (adapter->if_ops.enable_int)
+ adapter->if_ops.enable_int(adapter);
+
adapter->init_wait_q_woken = false;
ret = mwifiex_init_fw(adapter);
if (ret == -1) {
@@ -478,6 +482,8 @@ err_add_intf:
mwifiex_del_virtual_intf(adapter->wiphy, priv->wdev);
rtnl_unlock();
err_init_fw:
+ if (adapter->if_ops.disable_int)
+ adapter->if_ops.disable_int(adapter);
pr_debug("info: %s: unregister device\n", __func__);
adapter->if_ops.unregister_dev(adapter);
done:
@@ -855,7 +861,7 @@ mwifiex_add_card(void *card, struct semaphore *sem,
INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);
/* Register the device. Fill up the private data structure with relevant
- information from the card and request for the required IRQ. */
+ information from the card. */
if (adapter->if_ops.register_dev(adapter)) {
pr_err("%s: failed to register mwifiex device\n", __func__);
goto err_registerdev;
@@ -919,6 +925,11 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem)
if (!adapter)
goto exit_remove;
+ /* We can no longer handle interrupts once we start doing the teardown
+ * below. */
+ if (adapter->if_ops.disable_int)
+ adapter->if_ops.disable_int(adapter);
+
adapter->surprise_removed = true;
/* Stop data */
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 3da73d3..253e0bd 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -601,6 +601,7 @@ struct mwifiex_if_ops {
int (*register_dev) (struct mwifiex_adapter *);
void (*unregister_dev) (struct mwifiex_adapter *);
int (*enable_int) (struct mwifiex_adapter *);
+ void (*disable_int) (struct mwifiex_adapter *);
int (*process_int_status) (struct mwifiex_adapter *);
int (*host_to_card) (struct mwifiex_adapter *, u8, struct sk_buff *,
struct mwifiex_tx_param *);
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 5ee5ed0..5ef49f2 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -51,6 +51,7 @@ static struct mwifiex_if_ops sdio_ops;
static struct semaphore add_remove_card_sem;
static int mwifiex_sdio_resume(struct device *dev);
+static void mwifiex_sdio_interrupt(struct sdio_func *func);
/*
* SDIO probe.
@@ -296,6 +297,15 @@ static struct sdio_driver mwifiex_sdio = {
}
};
+/* Write data into SDIO card register. Caller claims SDIO device. */
+static int
+mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data)
+{
+ int ret = -1;
+ sdio_writeb(func, data, reg, &ret);
+ return ret;
+}
+
/*
* This function writes data into SDIO card register.
*/
@@ -303,10 +313,10 @@ static int
mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
{
struct sdio_mmc_card *card = adapter->card;
- int ret = -1;
+ int ret;
sdio_claim_host(card->func);
- sdio_writeb(card->func, data, reg, &ret);
+ ret = mwifiex_write_reg_locked(card->func, reg, data);
sdio_release_host(card->func);
return ret;
@@ -685,23 +695,15 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
* The host interrupt mask is read, the disable bit is reset and
* written back to the card host interrupt mask register.
*/
-static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
+static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
{
- u8 host_int_mask, host_int_disable = HOST_INT_DISABLE;
-
- /* Read back the host_int_mask register */
- if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
- return -1;
-
- /* Update with the mask and write back to the register */
- host_int_mask &= ~host_int_disable;
-
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
- dev_err(adapter->dev, "disable host interrupt failed\n");
- return -1;
- }
+ struct sdio_mmc_card *card = adapter->card;
+ struct sdio_func *func = card->func;
- return 0;
+ sdio_claim_host(func);
+ mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, 0);
+ sdio_release_irq(func);
+ sdio_release_host(func);
}
/*
@@ -713,14 +715,29 @@ static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ struct sdio_func *func = card->func;
+ int ret;
+
+ sdio_claim_host(func);
+
+ /* Request the SDIO IRQ */
+ ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
+ if (ret) {
+ dev_err(adapter->dev, "claim irq failed: ret=%d\n", ret);
+ goto out;
+ }
/* Simply write the mask to the register */
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG,
- card->reg->host_int_enable)) {
+ ret = mwifiex_write_reg_locked(func, HOST_INT_MASK_REG,
+ card->reg->host_int_enable);
+ if (ret) {
dev_err(adapter->dev, "enable host interrupt failed\n");
- return -1;
+ sdio_release_irq(func);
}
- return 0;
+
+out:
+ sdio_release_host(func);
+ return ret;
}
/*
@@ -997,9 +1014,6 @@ mwifiex_sdio_interrupt(struct sdio_func *func)
}
adapter = card->adapter;
- if (adapter->surprise_removed)
- return;
-
if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP)
adapter->ps_state = PS_STATE_AWAKE;
@@ -1728,9 +1742,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
struct sdio_mmc_card *card = adapter->card;
if (adapter->card) {
- /* Release the SDIO IRQ */
sdio_claim_host(card->func);
- sdio_release_irq(card->func);
sdio_disable_func(card->func);
sdio_release_host(card->func);
sdio_set_drvdata(card->func, NULL);
@@ -1744,7 +1756,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
*/
static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
{
- int ret = 0;
+ int ret;
struct sdio_mmc_card *card = adapter->card;
struct sdio_func *func = card->func;
@@ -1753,22 +1765,14 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
sdio_claim_host(func);
- /* Request the SDIO IRQ */
- ret = sdio_claim_irq(func, mwifiex_sdio_interrupt);
- if (ret) {
- pr_err("claim irq failed: ret=%d\n", ret);
- goto disable_func;
- }
-
/* Set block size */
ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE);
+ sdio_release_host(func);
if (ret) {
pr_err("cannot set SDIO block size\n");
- ret = -1;
- goto release_irq;
+ return ret;
}
- sdio_release_host(func);
sdio_set_drvdata(func, card);
adapter->dev = &func->dev;
@@ -1776,15 +1780,6 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
strcpy(adapter->fw_name, card->firmware);
return 0;
-
-release_irq:
- sdio_release_irq(func);
-disable_func:
- sdio_disable_func(func);
- sdio_release_host(func);
- adapter->card = NULL;
-
- return -1;
}
/*
@@ -1813,9 +1808,6 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
*/
mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg);
- /* Disable host interrupt mask register for SDIO */
- mwifiex_sdio_disable_host_int(adapter);
-
/* Get SDIO ioport */
mwifiex_init_sdio_ioport(adapter);
@@ -1957,6 +1949,7 @@ static struct mwifiex_if_ops sdio_ops = {
.register_dev = mwifiex_register_dev,
.unregister_dev = mwifiex_unregister_dev,
.enable_int = mwifiex_sdio_enable_host_int,
+ .disable_int = mwifiex_sdio_disable_host_int,
.process_int_status = mwifiex_process_int_status,
.host_to_card = mwifiex_sdio_host_to_card,
.wakeup = mwifiex_pm_wakeup_card,
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 6d51dfd..532ae0a 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -92,9 +92,6 @@
/* Host Control Registers : Download host interrupt mask */
#define DN_LD_HOST_INT_MASK (0x2U)
-/* Disable Host interrupt mask */
-#define HOST_INT_DISABLE 0xff
-
/* Host Control Registers : Host interrupt status */
#define HOST_INTSTATUS_REG 0x03
/* Host Control Registers : Upload host interrupt status */
--
1.8.1.4
^ permalink raw reply related
* Re: Firmware error for Centrino N 2230
From: Sedat Dilek @ 2013-07-13 11:26 UTC (permalink / raw)
To: Cedric GROSS; +Cc: linux-wireless
In-Reply-To: <001b01ce7fba$4bd15e20$e3741a60$@info>
On Sat, Jul 13, 2013 at 1:15 PM, Cedric GROSS <cg@cgross.info> wrote:
> Hello Sedat,
>
>> -----Message d'origine-----
>> De : Sedat Dilek [mailto:sedat.dilek@gmail.com]
>> Envoyé : samedi 13 juillet 2013 13:04
>> À : Cedric GROSS
>> Cc : linux-wireless@vger.kernel.org
>> Objet : Re: Firmware error for Centrino N 2230
>>
>> On Sat, Jul 13, 2013 at 12:12 PM, Cedric GROSS <cg@cgross.info> wrote:
>> > Hello,
>> >
>> > I’m trying to adapt current freebsd driver for supporting my 2230
>> NIC.
>> >
>> > I try to follow ucode command order defined in kernel 3.2 but I reach
>> > some difficulties because firmware raise error.
>> >
>> > Runtime uCode is alive. So far I sent calib result (cmd xB0),
>> > configured advanced BT coexistence (cmd x9B,xCC and xCD) running
>> > runtime calib (cmd
>> > x65) but the command configuring valid chain (cmd x65) failed as the
>> > result below :
>> > CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)
>> > IWN_HW_IF_CONFIG: 0x00800302 IWN_INT_COALESCING: 0x0000ff40
>> > IWN_INT: 0x04000000
>> > IWN_INT_MASK: 0x00000000 IWN_FH_INT: 0x00000000 IWN_GPIO_IN:
>> > 0x00000000
>> > IWN_RESET: 0x00000000 IWN_GP_CNTRL: 0x080403c5 IWN_HW_REV:
>> 0x000000c8
>> > IWN_EEPROM: 0x08450ffd IWN_EEPROM_GP: 0x90000801 IWN_OTP_GP:
>> > 0x00030001
>> > IWN_GIO: 0x00080044 INW_GP_UCODE: 0x00000004 IWN_GP_DRIVER:
>> > 0x00000080
>> > IWN_GP1_DRIVER: 0x00000000 IWN_UCODE_DRV_GP2: 0x00000000
>> IWN_LED:
>> > 0x00000018
>> > IWN_DRAM_INT_TBL: 0x880b76e5 IWN_GIO_CHICKEN: 0x29800200
>> IWN_ANA_PLL:
>> > 0x00000000
>> > IWN_HW_REV_WA: 0x0001001a IWN_DBG_HPET_MEM: 0xffff0000
>> > firmware error log:
>> > error type = "UNKNOWN" (0x00001987)
>> > program counter = 0x000179B4
>> > source line = 0x00000167
>> > error data = 0x0000000000000000
>> > branch link = 0x0001798200017982
>> > interrupt link = 0x0000EC7A00000000
>> > time = 46566
>> >
>> > What I’m missing ?
>> > What is meaning of firmware error ?
>> >
>>
>> What distro?
>> If this is Debian or Ubuntu, this is not a vanilla but distro-patched
>> kernel-version.
>
> I'm working on freeBSD. So it's not a linux distro ;)
>
Hmmm, why are you asking on a Linux ML and miss to tell you are on FreeBSD?
Better ask on a FreeBSD ML.
>>
>> Can you provide more infos?
>> Your kernel-config file, dmesg output, name of loaded firmware file,
>> etc.
>
> For firmware : iwlwifi-2030-18.168.6.1.fw
>
Seems to be the latest fw for you:
Intel® Centrino® Wireless-N 2230 | 3.2+ | iwlwifi-2030-ucode-18.168.6.1.tgz
> For the rest, I can send you what you wish, but it's not a linux output.
>
Not sure if this is really helpful.
Anyway, full logs seem sometimes to be more interesting.
I cannot help you - just giving general/common aid.
- Sedat -
>>
>> Did you check for newer firmware files (see [1])?
>>
>> Did you try a higher kernel-release?
>
> Doesn't apply ;)
>
>>
>> - Sedat -
>>
>> [1] http://wireless.kernel.org/en/users/Drivers/iwlwifi
>>
>> > Many thanks for your help.
>> >
>> > Best regards
>> > Cedric
>> >
>> > --
>
> Thanks for help anyway.
> Cedric
>
^ permalink raw reply
* RE: Firmware error for Centrino N 2230
From: Cedric GROSS @ 2013-07-13 11:15 UTC (permalink / raw)
To: sedat.dilek; +Cc: linux-wireless
In-Reply-To: <CA+icZUVoZkg3nT6=SwTaLCWoa+v6aLkXSP5b71a0GmxMMWOyHA@mail.gmail.com>
Hello Sedat,
> -----Message d'origine-----
> De : Sedat Dilek [mailto:sedat.dilek@gmail.com]
> Envoyé : samedi 13 juillet 2013 13:04
> À : Cedric GROSS
> Cc : linux-wireless@vger.kernel.org
> Objet : Re: Firmware error for Centrino N 2230
>
> On Sat, Jul 13, 2013 at 12:12 PM, Cedric GROSS <cg@cgross.info> wrote:
> > Hello,
> >
> > I’m trying to adapt current freebsd driver for supporting my 2230
> NIC.
> >
> > I try to follow ucode command order defined in kernel 3.2 but I reach
> > some difficulties because firmware raise error.
> >
> > Runtime uCode is alive. So far I sent calib result (cmd xB0),
> > configured advanced BT coexistence (cmd x9B,xCC and xCD) running
> > runtime calib (cmd
> > x65) but the command configuring valid chain (cmd x65) failed as the
> > result below :
> > CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)
> > IWN_HW_IF_CONFIG: 0x00800302 IWN_INT_COALESCING: 0x0000ff40
> > IWN_INT: 0x04000000
> > IWN_INT_MASK: 0x00000000 IWN_FH_INT: 0x00000000 IWN_GPIO_IN:
> > 0x00000000
> > IWN_RESET: 0x00000000 IWN_GP_CNTRL: 0x080403c5 IWN_HW_REV:
> 0x000000c8
> > IWN_EEPROM: 0x08450ffd IWN_EEPROM_GP: 0x90000801 IWN_OTP_GP:
> > 0x00030001
> > IWN_GIO: 0x00080044 INW_GP_UCODE: 0x00000004 IWN_GP_DRIVER:
> > 0x00000080
> > IWN_GP1_DRIVER: 0x00000000 IWN_UCODE_DRV_GP2: 0x00000000
> IWN_LED:
> > 0x00000018
> > IWN_DRAM_INT_TBL: 0x880b76e5 IWN_GIO_CHICKEN: 0x29800200
> IWN_ANA_PLL:
> > 0x00000000
> > IWN_HW_REV_WA: 0x0001001a IWN_DBG_HPET_MEM: 0xffff0000
> > firmware error log:
> > error type = "UNKNOWN" (0x00001987)
> > program counter = 0x000179B4
> > source line = 0x00000167
> > error data = 0x0000000000000000
> > branch link = 0x0001798200017982
> > interrupt link = 0x0000EC7A00000000
> > time = 46566
> >
> > What I’m missing ?
> > What is meaning of firmware error ?
> >
>
> What distro?
> If this is Debian or Ubuntu, this is not a vanilla but distro-patched
> kernel-version.
I'm working on freeBSD. So it's not a linux distro ;)
>
> Can you provide more infos?
> Your kernel-config file, dmesg output, name of loaded firmware file,
> etc.
For firmware : iwlwifi-2030-18.168.6.1.fw
For the rest, I can send you what you wish, but it's not a linux output.
>
> Did you check for newer firmware files (see [1])?
>
> Did you try a higher kernel-release?
Doesn't apply ;)
>
> - Sedat -
>
> [1] http://wireless.kernel.org/en/users/Drivers/iwlwifi
>
> > Many thanks for your help.
> >
> > Best regards
> > Cedric
> >
> > --
Thanks for help anyway.
Cedric
^ permalink raw reply
* Re: Firmware error for Centrino N 2230
From: Sedat Dilek @ 2013-07-13 11:03 UTC (permalink / raw)
To: Cedric GROSS; +Cc: linux-wireless
In-Reply-To: <001a01ce7fb1$75bfdc10$613f9430$@info>
On Sat, Jul 13, 2013 at 12:12 PM, Cedric GROSS <cg@cgross.info> wrote:
> Hello,
>
> I’m trying to adapt current freebsd driver for supporting my 2230 NIC.
>
> I try to follow ucode command order defined in kernel 3.2 but I reach some
> difficulties because firmware raise error.
>
> Runtime uCode is alive. So far I sent calib result (cmd xB0), configured
> advanced BT coexistence (cmd x9B,xCC and xCD) running runtime calib (cmd
> x65) but the command configuring valid chain (cmd x65) failed as the result
> below :
> CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)
> IWN_HW_IF_CONFIG: 0x00800302 IWN_INT_COALESCING: 0x0000ff40
> IWN_INT: 0x04000000
> IWN_INT_MASK: 0x00000000 IWN_FH_INT: 0x00000000 IWN_GPIO_IN:
> 0x00000000
> IWN_RESET: 0x00000000 IWN_GP_CNTRL: 0x080403c5 IWN_HW_REV: 0x000000c8
> IWN_EEPROM: 0x08450ffd IWN_EEPROM_GP: 0x90000801 IWN_OTP_GP:
> 0x00030001
> IWN_GIO: 0x00080044 INW_GP_UCODE: 0x00000004 IWN_GP_DRIVER:
> 0x00000080
> IWN_GP1_DRIVER: 0x00000000 IWN_UCODE_DRV_GP2: 0x00000000 IWN_LED:
> 0x00000018
> IWN_DRAM_INT_TBL: 0x880b76e5 IWN_GIO_CHICKEN: 0x29800200 IWN_ANA_PLL:
> 0x00000000
> IWN_HW_REV_WA: 0x0001001a IWN_DBG_HPET_MEM: 0xffff0000
> firmware error log:
> error type = "UNKNOWN" (0x00001987)
> program counter = 0x000179B4
> source line = 0x00000167
> error data = 0x0000000000000000
> branch link = 0x0001798200017982
> interrupt link = 0x0000EC7A00000000
> time = 46566
>
> What I’m missing ?
> What is meaning of firmware error ?
>
What distro?
If this is Debian or Ubuntu, this is not a vanilla but distro-patched
kernel-version.
Can you provide more infos?
Your kernel-config file, dmesg output, name of loaded firmware file, etc.
Did you check for newer firmware files (see [1])?
Did you try a higher kernel-release?
- Sedat -
[1] http://wireless.kernel.org/en/users/Drivers/iwlwifi
> Many thanks for your help.
>
> Best regards
> Cedric
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Firmware error for Centrino N 2230
From: Cedric GROSS @ 2013-07-13 10:12 UTC (permalink / raw)
To: linux-wireless
Hello,
I’m trying to adapt current freebsd driver for supporting my 2230 NIC.
I try to follow ucode command order defined in kernel 3.2 but I reach some
difficulties because firmware raise error.
Runtime uCode is alive. So far I sent calib result (cmd xB0), configured
advanced BT coexistence (cmd x9B,xCC and xCD) running runtime calib (cmd
x65) but the command configuring valid chain (cmd x65) failed as the result
below :
CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)
IWN_HW_IF_CONFIG: 0x00800302 IWN_INT_COALESCING: 0x0000ff40
IWN_INT: 0x04000000
IWN_INT_MASK: 0x00000000 IWN_FH_INT: 0x00000000 IWN_GPIO_IN:
0x00000000
IWN_RESET: 0x00000000 IWN_GP_CNTRL: 0x080403c5 IWN_HW_REV: 0x000000c8
IWN_EEPROM: 0x08450ffd IWN_EEPROM_GP: 0x90000801 IWN_OTP_GP:
0x00030001
IWN_GIO: 0x00080044 INW_GP_UCODE: 0x00000004 IWN_GP_DRIVER:
0x00000080
IWN_GP1_DRIVER: 0x00000000 IWN_UCODE_DRV_GP2: 0x00000000 IWN_LED:
0x00000018
IWN_DRAM_INT_TBL: 0x880b76e5 IWN_GIO_CHICKEN: 0x29800200 IWN_ANA_PLL:
0x00000000
IWN_HW_REV_WA: 0x0001001a IWN_DBG_HPET_MEM: 0xffff0000
firmware error log:
error type = "UNKNOWN" (0x00001987)
program counter = 0x000179B4
source line = 0x00000167
error data = 0x0000000000000000
branch link = 0x0001798200017982
interrupt link = 0x0000EC7A00000000
time = 46566
What I’m missing ?
What is meaning of firmware error ?
Many thanks for your help.
Best regards
Cedric
^ permalink raw reply
* [PATCH V2] rtlwifi: Fix build errors for unusual cases
From: Larry Finger @ 2013-07-12 20:32 UTC (permalink / raw)
To: linville
Cc: linux-wireless, Larry Finger, netdev, Ben Hutchings, Fengguang Wu
The present build configuration for the rtlwifi family of drivers will
fail under two known conditions:
(1) If rtlwifi is selected without selecting any of the dependent drivers,
there are errors in the build.
(2) If the PCI drivers are built into the kernel and the USB drivers are modules,
or vice versa, there are missing globals.
The first condition is fixed by never building rtlwifi unless at least one
of the device drivers is selected. The second failure is fixed by splitting
the PCI and USB codes out of rtlwifi, and creating their own mini drivers.
If the drivers that use them are modules, they will also be modules.
Although a number of files are touched by this patch, only Makefile and Kconfig
have undergone significant changes. The only modifications to the other files
were to export entry points needed by the new rtl_pci and rtl_usb units, or to
rename two variables that had names that were likely to cause namespace collisions.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [Condition 1]
Reported-by: Ben Hutchings <bhutchings@solarflare.com> [Condition 2]
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
---
V2 - addresses Ben Hutchings' suggestions and makes separate modules of PCI and USB mini drivers.
---
drivers/net/wireless/rtlwifi/Kconfig | 72 ++++++++++++++++++++++++++++++++++++++++++---------------------
drivers/net/wireless/rtlwifi/Makefile | 10 +++-----
drivers/net/wireless/rtlwifi/base.c | 19 ++++++++++++++--
drivers/net/wireless/rtlwifi/base.h | 2 -
drivers/net/wireless/rtlwifi/core.c | 1
drivers/net/wireless/rtlwifi/debug.c | 1
drivers/net/wireless/rtlwifi/efuse.c | 1
drivers/net/wireless/rtlwifi/pci.c | 9 +++++++
drivers/net/wireless/rtlwifi/ps.c | 4 +++
drivers/net/wireless/rtlwifi/usb.c | 7 ++++++
10 files changed, 91 insertions(+), 35 deletions(-)
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/Kconfig
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/Kconfig
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/Kconfig
@@ -1,27 +1,20 @@
-config RTLWIFI
- tristate "Realtek wireless card support"
- depends on MAC80211
- select FW_LOADER
- ---help---
- This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE
- drivers. This module does nothing by itself - the various front-end
- drivers need to be enabled to support any desired devices.
-
- If you choose to build as a module, it'll be called rtlwifi.
-
-config RTLWIFI_DEBUG
- bool "Debugging output for rtlwifi driver family"
- depends on RTLWIFI
+menuconfig RTL_CARDS
+ tristate "Realtek rtlwifi family of devices"
+ depends on MAC80211 && (PCI || USB)
default y
---help---
- To use the module option that sets the dynamic-debugging level for,
- the front-end driver, this parameter must be "Y". For memory-limited
- systems, choose "N". If in doubt, choose "Y".
+ This option will enable support for the Realtek mac80211-based
+ wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
+ rtl8723eu, and rtl8188eu share some common code.
+
+if RTL_CARDS
config RTL8192CE
tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter"
- depends on RTLWIFI && PCI
+ depends on PCI
select RTL8192C_COMMON
+ select RTLWIFI
+ select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
wireless network adapters.
@@ -30,7 +23,9 @@ config RTL8192CE
config RTL8192SE
tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
wireless network adapters.
@@ -39,7 +34,9 @@ config RTL8192SE
config RTL8192DE
tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
wireless network adapters.
@@ -48,7 +45,9 @@ config RTL8192DE
config RTL8723AE
tristate "Realtek RTL8723AE PCIe Wireless Network Adapter"
- depends on RTLWIFI && PCI
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8723AE 802.11n PCIe
wireless network adapters.
@@ -57,7 +56,9 @@ config RTL8723AE
config RTL8188EE
tristate "Realtek RTL8188EE Wireless Network Adapter"
- depends on RTLWIFI && PCI
+ depends on PCI
+ select RTLWIFI
+ select RTLWIFI_PCI
---help---
This is the driver for Realtek RTL8188EE 802.11n PCIe
wireless network adapters.
@@ -66,7 +67,9 @@ config RTL8188EE
config RTL8192CU
tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter"
- depends on RTLWIFI && USB
+ depends on USB
+ select RTLWIFI
+ select RTLWIFI_USB
select RTL8192C_COMMON
---help---
This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
@@ -74,7 +77,28 @@ config RTL8192CU
If you choose to build it as a module, it will be called rtl8192cu
+config RTLWIFI
+ tristate
+ select FW_LOADER
+
+config RTLWIFI_PCI
+ tristate
+
+config RTLWIFI_USB
+ tristate
+
+config RTLWIFI_DEBUG
+ bool "Debugging output for rtlwifi driver family"
+ depends on RTLWIFI
+ default y
+ ---help---
+ To use the module option that sets the dynamic-debugging level for,
+ the front-end driver, this parameter must be "Y". For memory-limited
+ systems, choose "N". If in doubt, choose "Y".
+
config RTL8192C_COMMON
tristate
depends on RTL8192CE || RTL8192CU
- default m
+ default y
+
+endif
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/Makefile
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/Makefile
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/Makefile
@@ -12,13 +12,11 @@ rtlwifi-objs := \
rtl8192c_common-objs += \
-ifneq ($(CONFIG_PCI),)
-rtlwifi-objs += pci.o
-endif
+obj-$(CONFIG_RTLWIFI_PCI) += rtl_pci.o
+rtl_pci-objs := pci.o
-ifneq ($(CONFIG_USB),)
-rtlwifi-objs += usb.o
-endif
+obj-$(CONFIG_RTLWIFI_USB) += rtl_usb.o
+rtl_usb-objs := usb.o
obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/
obj-$(CONFIG_RTL8192CE) += rtl8192ce/
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/base.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/base.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/base.c
@@ -172,6 +172,7 @@ u8 rtl_tid_to_ac(u8 tid)
{
return tid_to_ac[tid];
}
+EXPORT_SYMBOL_GPL(rtl_tid_to_ac);
static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
struct ieee80211_sta_ht_cap *ht_cap)
@@ -406,6 +407,7 @@ void rtl_deinit_deferred_work(struct iee
cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
cancel_delayed_work(&rtlpriv->works.fwevt_wq);
}
+EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work);
void rtl_init_rfkill(struct ieee80211_hw *hw)
{
@@ -439,6 +441,7 @@ void rtl_deinit_rfkill(struct ieee80211_
{
wiphy_rfkill_stop_polling(hw->wiphy);
}
+EXPORT_SYMBOL_GPL(rtl_deinit_rfkill);
int rtl_init_core(struct ieee80211_hw *hw)
{
@@ -489,10 +492,12 @@ int rtl_init_core(struct ieee80211_hw *h
return 0;
}
+EXPORT_SYMBOL_GPL(rtl_init_core);
void rtl_deinit_core(struct ieee80211_hw *hw)
{
}
+EXPORT_SYMBOL_GPL(rtl_deinit_core);
void rtl_init_rx_config(struct ieee80211_hw *hw)
{
@@ -501,6 +506,7 @@ void rtl_init_rx_config(struct ieee80211
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
}
+EXPORT_SYMBOL_GPL(rtl_init_rx_config);
/*********************************************************
*
@@ -879,6 +885,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_h
return true;
}
+EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc);
void rtl_get_tcb_desc(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
@@ -1052,6 +1059,7 @@ bool rtl_action_proc(struct ieee80211_hw
return true;
}
+EXPORT_SYMBOL_GPL(rtl_action_proc);
/*should call before software enc*/
u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
@@ -1125,6 +1133,7 @@ u8 rtl_is_special_data(struct ieee80211_
return false;
}
+EXPORT_SYMBOL_GPL(rtl_is_special_data);
/*********************************************************
*
@@ -1300,6 +1309,7 @@ void rtl_beacon_statistic(struct ieee802
rtlpriv->link_info.bcn_rx_inperiod++;
}
+EXPORT_SYMBOL_GPL(rtl_beacon_statistic);
void rtl_watchdog_wq_callback(void *data)
{
@@ -1793,6 +1803,7 @@ void rtl_recognize_peer(struct ieee80211
mac->vendor = vendor;
}
+EXPORT_SYMBOL_GPL(rtl_recognize_peer);
/*********************************************************
*
@@ -1849,6 +1860,7 @@ struct attribute_group rtl_attribute_gro
.name = "rtlsysfs",
.attrs = rtl_sysfs_entries,
};
+EXPORT_SYMBOL_GPL(rtl_attribute_group);
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
@@ -1856,7 +1868,8 @@ MODULE_AUTHOR("Larry Finger <Larry.FInge
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
-struct rtl_global_var global_var = {};
+struct rtl_global_var rtl_global_var = {};
+EXPORT_SYMBOL_GPL(rtl_global_var);
static int __init rtl_core_module_init(void)
{
@@ -1864,8 +1877,8 @@ static int __init rtl_core_module_init(v
pr_err("Unable to register rtl_rc, use default RC !!\n");
/* init some global vars */
- INIT_LIST_HEAD(&global_var.glb_priv_list);
- spin_lock_init(&global_var.glb_list_lock);
+ INIT_LIST_HEAD(&rtl_global_var.glb_priv_list);
+ spin_lock_init(&rtl_global_var.glb_list_lock);
return 0;
}
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/base.h
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/base.h
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/base.h
@@ -147,7 +147,7 @@ void rtl_recognize_peer(struct ieee80211
u8 rtl_tid_to_ac(u8 tid);
extern struct attribute_group rtl_attribute_group;
void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
-extern struct rtl_global_var global_var;
+extern struct rtl_global_var rtl_global_var;
int rtlwifi_rate_mapping(struct ieee80211_hw *hw,
bool isht, u8 desc_rate, bool first_ampdu);
bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/core.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/core.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/core.c
@@ -1330,3 +1330,4 @@ const struct ieee80211_ops rtl_ops = {
.rfkill_poll = rtl_op_rfkill_poll,
.flush = rtl_op_flush,
};
+EXPORT_SYMBOL_GPL(rtl_ops);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/debug.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/debug.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/debug.c
@@ -51,3 +51,4 @@ void rtl_dbgp_flag_init(struct ieee80211
/*Init Debug flag enable condition */
}
+EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/efuse.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/efuse.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/efuse.c
@@ -229,6 +229,7 @@ void read_efuse_byte(struct ieee80211_hw
*pbuf = (u8) (value32 & 0xff);
}
+EXPORT_SYMBOL_GPL(read_efuse_byte);
void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
{
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/pci.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/pci.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/pci.c
@@ -35,6 +35,13 @@
#include "efuse.h"
#include <linux/export.h>
#include <linux/kmemleak.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCI basic driver for rtlwifi");
static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
PCI_VENDOR_ID_INTEL,
@@ -1886,7 +1893,7 @@ int rtl_pci_probe(struct pci_dev *pdev,
rtlpriv->rtlhal.interface = INTF_PCI;
rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
rtlpriv->intf_ops = &rtl_pci_ops;
- rtlpriv->glb_var = &global_var;
+ rtlpriv->glb_var = &rtl_global_var;
/*
*init dbgp flags before all
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/ps.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/ps.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/ps.c
@@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw
spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
}
+EXPORT_SYMBOL_GPL(rtl_ips_nic_on);
/*for FW LPS*/
@@ -518,6 +519,7 @@ void rtl_swlps_beacon(struct ieee80211_h
"u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
}
}
+EXPORT_SYMBOL_GPL(rtl_swlps_beacon);
void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
{
@@ -623,6 +625,7 @@ void rtl_lps_change_work_callback(struct
else
rtl_lps_leave(hw);
}
+EXPORT_SYMBOL_GPL(rtl_lps_change_work_callback);
void rtl_swlps_wq_callback(void *data)
{
@@ -934,3 +937,4 @@ void rtl_p2p_info(struct ieee80211_hw *h
else
rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
}
+EXPORT_SYMBOL_GPL(rtl_p2p_info);
Index: wireless-testing-save/drivers/net/wireless/rtlwifi/usb.c
===================================================================
--- wireless-testing-save.orig/drivers/net/wireless/rtlwifi/usb.c
+++ wireless-testing-save/drivers/net/wireless/rtlwifi/usb.c
@@ -32,6 +32,13 @@
#include "ps.h"
#include "rtl8192c/fw_common.h"
#include <linux/export.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger <Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB basic driver for rtlwifi");
#define REALTEK_USB_VENQT_READ 0xC0
#define REALTEK_USB_VENQT_WRITE 0x40
^ permalink raw reply
* Re: linux-next: Tree for Jul 12 (net/wireless/brcmsmac)
From: Randy Dunlap @ 2013-07-12 20:05 UTC (permalink / raw)
To: Stephen Rothwell
Cc: linux-next, linux-kernel, brcm80211-dev-list, linux-wireless
In-Reply-To: <20130712141457.7e85684f103060b91b966bd3@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 418 bytes --]
On 07/11/13 21:14, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20130711:
>
on i386:
# CONFIG_NEW_LEDS is not set
drivers/built-in.o: In function `brcms_led_unregister':
(.text+0x2dc8fc): undefined reference to `led_classdev_unregister'
drivers/built-in.o: In function `brcms_led_register':
(.text+0x2dcaa5): undefined reference to `led_classdev_register'
Full randconfig file is attached.
--
~Randy
[-- Attachment #2: config-r3307 --]
[-- Type: text/plain, Size: 60995 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.10.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_UIDGID_CONVERTED=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_32_IRIS=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_GUEST is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_F00F_BUG=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
# CONFIG_ZBUD is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
# CONFIG_ALIX is not set
CONFIG_NET5501=y
CONFIG_GEOS=y
# CONFIG_PCCARD is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE=y
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
# CONFIG_L2TP_IP is not set
CONFIG_L2TP_ETH=y
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_MAC802154=y
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
# CONFIG_OPENVSWITCH_GRE is not set
CONFIG_VSOCKETS=y
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=y
CONFIG_VIA_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=y
CONFIG_NFC_PN544=y
CONFIG_NFC_MICROREAD=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=y
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_SCx200_DOCFLASH=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=y
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLOCKCONSOLE is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1780=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_SRAM is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_ATA_BMDMA is not set
#
# PIO-only SFF controllers
#
#
# Generic fallback / legacy drivers
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_EDEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BLK_DEV_DM is not set
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
CONFIG_LOOPBACK_TARGET=y
# CONFIG_TCM_FC is not set
CONFIG_ISCSI_TARGET=y
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
#
# CAIF transport drivers
#
# CONFIG_VHOST_NET is not set
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_CADENCE=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_MACB=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_DNET=y
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=y
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NET_VENDOR_8390 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_SH_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_WLAN=y
CONFIG_LIBERTAS_THINFIRM=y
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_ATH_CARDS is not set
# CONFIG_B43 is not set
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMFMAC=y
# CONFIG_BRCMFMAC_SDIO is not set
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
# CONFIG_HOSTAP is not set
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_SDIO is not set
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
CONFIG_RTLWIFI=y
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_WL_TI=y
CONFIG_WL1251=y
# CONFIG_WL1251_SDIO is not set
CONFIG_WL12XX=y
# CONFIG_WL18XX is not set
CONFIG_WLCORE=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
# CONFIG_MWIFIEX is not set
# CONFIG_CW1200 is not set
#
# WiMAX Wireless Broadband devices
#
#
# Enable USB support to see WiMAX USB drivers
#
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKEHARD=y
CONFIG_IEEE802154_FAKELB=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_STMPE=y
# CONFIG_KEYBOARD_TC3589X is not set
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
CONFIG_SERIAL_TIMBERDALE=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_ST33_I2C=y
CONFIG_TELCLOCK=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_TS5500=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_RC5T583 is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65912=y
# CONFIG_GPIO_TWL4030 is not set
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=y
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_WM8350_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_RETU_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_F71808E_WDT=y
CONFIG_SC520_WDT=y
CONFIG_SBC_FITPC2_WATCHDOG=y
CONFIG_EUROTECH_WDT=y
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_KEMPLD_WDT=y
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=y
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=y
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=y
CONFIG_W83697UG_WDT=y
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
# CONFIG_MFD_TWL4030_AUDIO is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX77693 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_ARC=y
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_GOLDFISH is not set
CONFIG_FB_VIRTUAL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_BROADSHEET=y
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_SOC=y
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
CONFIG_I2C_HID=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=y
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ECHO is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
#
# Analog to digital converters
#
CONFIG_AD7291=y
# CONFIG_AD7606 is not set
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
# CONFIG_ADT7316_I2C is not set
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7152=y
CONFIG_AD7746=y
#
# Direct Digital Synthesis
#
#
# Digital gyroscope sensors
#
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y
#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=y
#
# Active energy metering IC
#
CONFIG_ADE7854=y
# CONFIG_ADE7854_I2C is not set
#
# Resolver to digital converters
#
#
# Triggers - standalone
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
CONFIG_ZSMALLOC=y
CONFIG_ZRAM=y
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_WIMAX_GDM72XX=y
CONFIG_WIMAX_GDM72XX_QOS=y
CONFIG_WIMAX_GDM72XX_K_MODE=y
# CONFIG_WIMAX_GDM72XX_WIMAX2 is not set
CONFIG_WIMAX_GDM72XX_SDIO=y
# CONFIG_DGRP is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_CHROMEOS_LAPTOP=y
CONFIG_AMILO_RFKILL=y
CONFIG_SENSORS_HDAPS=y
# CONFIG_SAMSUNG_Q10 is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_ARIZONA is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
#
# Analog to digital converters
#
# CONFIG_LP8788_ADC is not set
# CONFIG_MAX1363 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_AM335X_ADC=y
#
# Amplifiers
#
#
# Hid Sensor IIO Common
#
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
CONFIG_AD5446=y
# CONFIG_MAX517 is not set
CONFIG_MCP4725=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_SENSORS_LM3533=y
CONFIG_SENSORS_TSL2563=y
CONFIG_VCNL4000=y
#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
#
# Pressure Sensors
#
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_IPACK_BUS=y
CONFIG_SERIAL_IPOCTAL=y
# CONFIG_RESET_CONTROLLER is not set
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
# CONFIG_FMC_TRIVIAL is not set
# CONFIG_FMC_WRITE_EEPROM is not set
CONFIG_FMC_CHARDEV=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_X86_DEBUG_STATIC_CPU_HAS=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_LGUEST=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
# CONFIG_DDR is not set
^ permalink raw reply
* Re: Help adding trace events to xHCI
From: Mark Wielaard @ 2013-07-12 19:35 UTC (permalink / raw)
To: Mathieu Desnoyers
Cc: Sarah Sharp, Kalle Valo, Johannes Berg, Xenia Ragiadakou,
OPW Kernel Interns List, linux-usb, linux-wireless,
Steven Rostedt, linux-trace-users, lttng-dev
In-Reply-To: <20130712170827.GA18819@Krystal>
Hi Mathieu,
On Fri, Jul 12, 2013 at 01:08:28PM -0400, Mathieu Desnoyers wrote:
> * Sarah Sharp (sarah.a.sharp@linux.intel.com) wrote:
> > Thanks for the suggestion. I'm not familiar with all the userspace
> > tools for trace events, so I didn't know about the command parser. Is
> > there documentation or a list of resources for all the userspace trace
> > event plugins? If so, can you give us a pointer to it?
>
> You might want to try out LTTng-UST. It provides TRACEPOINT_EVENT() and
> tracepoint() for user-space instrumentation. See:
>
> - https://lttng.org/files/doc/man-pages/man3/lttng-ust.3.html
Is that build on the <sys/sdt.h> ust probe points as embedded in glibc
for example that gdb and systemtap use to access user space trace
points? Can tools use lttng-ust and <sys/sdt.h> tracepoints
interchangeably by parsing the ELF notes described in
http://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation
Thanks,
Mark
^ permalink raw reply
* Re: Help adding trace events to xHCI
From: Kalle Valo @ 2013-07-12 18:59 UTC (permalink / raw)
To: Sarah Sharp
Cc: Johannes Berg, Xenia Ragiadakou, OPW Kernel Interns List,
linux-usb, linux-wireless, Steven Rostedt, linux-trace-users
In-Reply-To: <20130712164104.GA15531@xanatos>
Sarah Sharp <sarah.a.sharp@linux.intel.com> writes:
> On Fri, Jul 12, 2013 at 07:25:59AM +0300, Kalle Valo wrote:
>
>> Instead of individual trace points for command I would recommend to
>> consider just pushing the whole command buffer to the trace point and
>> parse the command in trace-cmd plugin in user space. Kernel code would
>> be simpler that way.
>
> Thanks for the suggestion. I'm not familiar with all the userspace
> tools for trace events, so I didn't know about the command parser. Is
> there documentation or a list of resources for all the userspace trace
> event plugins? If so, can you give us a pointer to it?
For ath6kl I started writing (but did not finish yet) a simple python
plugin for trace-cmd. I really like the idea of implementing of
implementing the parser with python, it's so much faster and more
convenient. I haven't published the plugin yet so that's not going to
help you right now.
But trace-cmd documentation about python plugins should give some ideas
how to use python:
https://git.kernel.org/cgit/linux/kernel/git/rostedt/trace-cmd.git/tree/Documentation/README.PythonPlugin
And as usual, Johannes is a good source of information ;)
--
Kalle Valo
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox