* [PATCH 36/53] wireless-regdb: SE, Sweden - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index bf4eea1..ab718f3 100644
--- a/db.txt
+++ b/db.txt
@@ -682,9 +682,9 @@ country SA:
country SE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 35/53] wireless-regdb: ES, Spain - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index ce61f97..bf4eea1 100644
--- a/db.txt
+++ b/db.txt
@@ -272,9 +272,9 @@ country EG:
country ES: DFS-ETSI
(2400 - 2483.5 @ 40), (N/A, 100 mW)
- (5150 - 5250 @ 40), (N/A, 100 mW), NO-OUTDOOR
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5150 - 5250 @ 80), (N/A, 100 mW), NO-OUTDOOR
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 34/53] wireless-regdb: SK, Slovakia - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index f411ae3..ce61f97 100644
--- a/db.txt
+++ b/db.txt
@@ -705,9 +705,9 @@ country SI: DFS-ETSI
country SK: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 33/53] wireless-regdb: PT, Portugal - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 2f71dba..f411ae3 100644
--- a/db.txt
+++ b/db.txt
@@ -630,9 +630,9 @@ country PL: DFS-ETSI
country PT: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 32/53] wireless-regdb: PL, Poland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 8f8e8fc..2f71dba 100644
--- a/db.txt
+++ b/db.txt
@@ -622,9 +622,9 @@ country PK:
country PL: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 31/53] wireless-regdb: NL, Netherlands - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 04a176e..8f8e8fc 100644
--- a/db.txt
+++ b/db.txt
@@ -558,9 +558,9 @@ country MX:
country NL: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
- (5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20), NO-OUTDOOR
+ (5250 - 5330 @ 80), (N/A, 20), NO-OUTDOOR, DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 30/53] wireless-regdb: LU, Luxembourg - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index b8ddd9e..04a176e 100644
--- a/db.txt
+++ b/db.txt
@@ -500,9 +500,9 @@ country LT: DFS-ETSI
country LU: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 29/53] wireless-regdb: IT, Italy - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 88ba709..b8ddd9e 100644
--- a/db.txt
+++ b/db.txt
@@ -415,9 +415,9 @@ country IR:
country IT: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 28/53] wireless-regdb: IE, Ireland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 7077b53..88ba709 100644
--- a/db.txt
+++ b/db.txt
@@ -384,9 +384,9 @@ country ID:
country IE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 27/53] wireless-regdb: GR, Greece- enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 3790d4e..7077b53 100644
--- a/db.txt
+++ b/db.txt
@@ -318,9 +318,9 @@ country GD:
country GR: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 26/53] wireless-regdb: FI, Finland - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 26cc023..3790d4e 100644
--- a/db.txt
+++ b/db.txt
@@ -280,9 +280,9 @@ country ES: DFS-ETSI
country FI: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 25/53] wireless-regdb: DK, Denmark - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 94be114..26cc023 100644
--- a/db.txt
+++ b/db.txt
@@ -236,9 +236,9 @@ country DE: DFS-ETSI
country DK: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 24/53] wireless-regdb: CZ, Czech Republic - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 5e17129..94be114 100644
--- a/db.txt
+++ b/db.txt
@@ -204,9 +204,9 @@ country CY: DFS-ETSI
# implemented.
country CZ: DFS-ETSI
(2400 - 2483.5 @ 40), (N/A, 100 mW)
- (5150 - 5250 @ 40), (N/A, 200 mW), NO-OUTDOOR
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5150 - 5250 @ 80), (N/A, 200 mW), NO-OUTDOOR
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 23/53] wireless-regdb: BE, Belgium - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index fd0ef09..5e17129 100644
--- a/db.txt
+++ b/db.txt
@@ -89,9 +89,9 @@ country BD:
country BE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 22/53] wireless-regdb: GB, United Kingdom - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index b58d4e2..fd0ef09 100644
--- a/db.txt
+++ b/db.txt
@@ -303,9 +303,9 @@ country GE:
country GB: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 21/53] wireless-regdb: DE, Germany - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 15e413e..b58d4e2 100644
--- a/db.txt
+++ b/db.txt
@@ -226,11 +226,11 @@ country DE: DFS-ETSI
# entries 279004 and 280006
(2400 - 2483.5 @ 40), (N/A, 100 mW)
# entry 303005
- (5150 - 5250 @ 40), (N/A, 100 mW), NO-OUTDOOR
+ (5150 - 5250 @ 80), (N/A, 100 mW), NO-OUTDOOR
# entries 304002 and 305002
- (5250 - 5350 @ 40), (N/A, 100 mW), NO-OUTDOOR, DFS
+ (5250 - 5350 @ 80), (N/A, 100 mW), NO-OUTDOOR, DFS
# entries 308002, 309001 and 310003
- (5470 - 5725 @ 40), (N/A, 500 mW), DFS
+ (5470 - 5725 @ 80), (N/A, 500 mW), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 20/53] wireless-regdb: FR, France - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index fb83f7a..15e413e 100644
--- a/db.txt
+++ b/db.txt
@@ -288,9 +288,9 @@ country FI: DFS-ETSI
country FR: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 19/53] wireless-regdb: AT, Austria - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies.
This is a country that belongs CEPT [0] and an available
regulatory source is ECC/DEC/(04)08 [1].
Quoting:
considering [...]
e. that the systems covered by this ECC Decision operate
typically in a 20 MHz channel bandwidth, other values for
the channel bandwidth are also feasible provided they
comply with the relevant maximum mean e.i.r.p. and the
corresponding maximum mean e.i.r.p. density limits;
[0] https://en.wikipedia.org/wiki/European_Conference_of_Postal_and_Telecommunications_Administrations
[1] http://www.erodocdb.dk/Docs/doc98/official/pdf/ECCDEC0408.PDF
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 47bfc95..fb83f7a 100644
--- a/db.txt
+++ b/db.txt
@@ -46,9 +46,9 @@ country AR:
country AT: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (N/A, 20)
+ (5250 - 5330 @ 80), (N/A, 20), DFS
+ (5490 - 5710 @ 80), (N/A, 27), DFS
# 60 gHz band channels 1-4, ref: Etsi En 302 567
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
--
1.7.10.4
^ permalink raw reply related
* [PATCH 18/53] wireless-regdb: VN, Vietnam - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP. This also adds
two new 5 GHz bands:
* 5490 - 5710 MHz
* 5735 - 5835 MHz
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/db.txt b/db.txt
index f714982..47bfc95 100644
--- a/db.txt
+++ b/db.txt
@@ -796,8 +796,10 @@ country VE:
country VN:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country YE:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 17/53] wireless-regdb: AE, United Arab Emirates - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP. This also adds
a new DFS 5 GHz band: 5735 - 5835 MHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 84214b0..f714982 100644
--- a/db.txt
+++ b/db.txt
@@ -18,9 +18,10 @@ country AD:
country AE:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5490 - 5710 @ 40), (N/A, 27), DFS
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country AL:
(2402 - 2482 @ 20), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 16/53] wireless-regdb: TH, Thailand - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 4475019..84214b0 100644
--- a/db.txt
+++ b/db.txt
@@ -726,10 +726,10 @@ country TW:
country TH:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (3, 17)
- (5250 - 5330 @ 40), (3, 20), DFS
- (5490 - 5710 @ 40), (3, 20), DFS
- (5735 - 5835 @ 40), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country TT:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 15/53] wireless-regdb: ZA, South Africa - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/db.txt b/db.txt
index 9043a3c..4475019 100644
--- a/db.txt
+++ b/db.txt
@@ -803,10 +803,10 @@ country YE:
country ZA:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (3, 17)
- (5250 - 5330 @ 40), (3, 20), DFS
- (5490 - 5710 @ 40), (3, 20), DFS
- (5735 - 5835 @ 40), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country ZW:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 14/53] wireless-regdb: SG, Singapore - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP. This also adds
a new DFS 5 GHz band: 5490 - 5710 MHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 8e7fe8d..9043a3c 100644
--- a/db.txt
+++ b/db.txt
@@ -689,9 +689,10 @@ country SE: DFS-ETSI
country SG:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 40), (N/A, 20)
- (5250 - 5330 @ 40), (N/A, 20), DFS
- (5735 - 5835 @ 40), (N/A, 20)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country SI: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 13/53] wireless-regdb: SA, Saudi Arabia - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP. This also adds
a new DFS 5 GHz band: 5490 - 5710 MHz.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index 867b070..8e7fe8d 100644
--- a/db.txt
+++ b/db.txt
@@ -674,9 +674,10 @@ country RW:
country SA:
(2402 - 2482 @ 40), (N/A, 20)
- (5170 - 5250 @ 20), (3, 23)
- (5250 - 5330 @ 20), (3, 23), DFS
- (5735 - 5835 @ 20), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country SE: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
* [PATCH 12/53] wireless-regdb: PR, Puerto Rico - enable VHT80
From: Luis R. Rodriguez @ 2013-07-17 2:18 UTC (permalink / raw)
To: linville; +Cc: wireless-regdb, linux-wireless, Luis R. Rodriguez
In-Reply-To: <1374027522-18488-1-git-send-email-mcgrof@do-not-panic.com>
From: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
This enables 80 MHz bandwidth usage on all 5 GHz
frequencies and update the max EIRP. This also adds
a new DFS 5 GHz band: 5490 - 5710 MHz.
PR is a proper ISO 3166 alpha2 code for Puerto Rico,
an unincorporated territory of the United States.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
---
db.txt | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/db.txt b/db.txt
index c37c3d6..867b070 100644
--- a/db.txt
+++ b/db.txt
@@ -637,9 +637,10 @@ country PT: DFS-ETSI
country PR:
(2402 - 2472 @ 40), (3, 27)
- (5170 - 5250 @ 40), (3, 17)
- (5250 - 5330 @ 40), (3, 23), DFS
- (5735 - 5835 @ 40), (3, 30)
+ (5170 - 5250 @ 80), (3, 17)
+ (5250 - 5330 @ 80), (3, 24), DFS
+ (5490 - 5710 @ 80), (3, 24), DFS
+ (5735 - 5835 @ 80), (3, 30)
country QA:
(2402 - 2482 @ 40), (N/A, 20)
--
1.7.10.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox