* [PATCH 01/14] ath9k: Use a subroutine to check for "mybeacon"
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 36 ++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 2dd851a..0c23053 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1160,6 +1160,24 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc,
}
}
+static bool ath9k_is_mybeacon(struct ath_softc *sc, struct sk_buff *skb)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr;
+
+ hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
+
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ RX_STAT_INC(rx_beacons);
+ if (!is_zero_ether_addr(common->curbssid) &&
+ ether_addr_equal(hdr->addr3, common->curbssid))
+ return true;
+ }
+
+ return false;
+}
+
int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
{
struct ath_buf *bf;
@@ -1175,7 +1193,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
enum ath9k_rx_qtype qtype;
bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
int dma_type;
- u8 rx_status_len = ah->caps.rx_status_len;
u64 tsf = 0;
u32 tsf_lower = 0;
unsigned long flags;
@@ -1216,18 +1233,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
else
hdr_skb = skb;
- hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len);
- rxs = IEEE80211_SKB_RXCB(hdr_skb);
- if (ieee80211_is_beacon(hdr->frame_control)) {
- RX_STAT_INC(rx_beacons);
- if (!is_zero_ether_addr(common->curbssid) &&
- ether_addr_equal(hdr->addr3, common->curbssid))
- rs.is_mybeacon = true;
- else
- rs.is_mybeacon = false;
- }
- else
- rs.is_mybeacon = false;
+ rs.is_mybeacon = ath9k_is_mybeacon(sc, hdr_skb);
+
+ hdr = (struct ieee80211_hdr *) (hdr_skb->data +
+ ah->caps.rx_status_len);
if (ieee80211_is_data_present(hdr->frame_control) &&
!ieee80211_is_qos_nullfunc(hdr->frame_control))
@@ -1235,6 +1244,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
ath_debug_stat_rx(sc, &rs);
+ rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
--
1.8.3.4
^ permalink raw reply related
* [PATCH 03/14] ath9k: Discard invalid frames early
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Frames with invalid or zero length can be discarded
early, there is no need to check the crypto bits.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 38 ++++++++++++++++++++---------------
1 file changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 83b3fc5..f8cc2b3 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -764,7 +764,6 @@ static bool ath9k_rx_accept(struct ath_common *common,
bool is_mc, is_valid_tkip, strip_mic, mic_error;
struct ath_hw *ah = common->ah;
__le16 fc;
- u8 rx_status_len = ah->caps.rx_status_len;
fc = hdr->frame_control;
@@ -786,21 +785,6 @@ static bool ath9k_rx_accept(struct ath_common *common,
!test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
- if (!rx_stats->rs_datalen) {
- RX_STAT_INC(rx_len_err);
- return false;
- }
-
- /*
- * rs_status follows rs_datalen so if rs_datalen is too large
- * we can take a hint that hardware corrupted it, so ignore
- * those frames.
- */
- if (rx_stats->rs_datalen > (common->rx_bufsize - rx_status_len)) {
- RX_STAT_INC(rx_len_err);
- return false;
- }
-
/* Only use error bits from the last fragment */
if (rx_stats->rs_more)
return true;
@@ -949,11 +933,33 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ath_common *common = ath9k_hw_common(ah);
bool discard_current = sc->rx.discard_next;
+ /*
+ * Discard corrupt descriptors which are marked in
+ * ath_get_next_rx_buf().
+ */
sc->rx.discard_next = rx_stats->rs_more;
if (discard_current)
return -EINVAL;
/*
+ * Discard zero-length packets.
+ */
+ if (!rx_stats->rs_datalen) {
+ RX_STAT_INC(rx_len_err);
+ return -EINVAL;
+ }
+
+ /*
+ * rs_status follows rs_datalen so if rs_datalen is too large
+ * we can take a hint that hardware corrupted it, so ignore
+ * those frames.
+ */
+ if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) {
+ RX_STAT_INC(rx_len_err);
+ return -EINVAL;
+ }
+
+ /*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
*/
--
1.8.3.4
^ permalink raw reply related
* [PATCH 02/14] ath9k: Fix phy error handling for DFS
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Since the DFS code appears to process the phy errors
ATH9K_PHYERR_RADAR and ATH9K_PHYERR_FALSE_RADAR_EXT,
check for the correct phyerr status in the main RX
tasklet routine.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 0c23053..83b3fc5 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1256,10 +1256,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
rxs->mactime += 0x100000000ULL;
- if (rs.rs_phyerr == ATH9K_PHYERR_RADAR)
+ if (rs.rs_status & ATH9K_RXERR_PHY) {
ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime);
- if (rs.rs_status & ATH9K_RXERR_PHY) {
if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) {
RX_STAT_INC(rx_spectral);
goto requeue_drop_frag;
--
1.8.3.4
^ permalink raw reply related
* [PATCH 04/14] ath9k: Fix RX crypto processing
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The keymiss events are valid only in the last descriptor
of a packet. Fix this by making sure that we return
early in case of chained descriptors.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index f8cc2b3..b04a971 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -785,10 +785,6 @@ static bool ath9k_rx_accept(struct ath_common *common,
!test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
- /* Only use error bits from the last fragment */
- if (rx_stats->rs_more)
- return true;
-
mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) &&
!ieee80211_has_morefrags(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
@@ -959,6 +955,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
return -EINVAL;
}
+ /* Only use status info from the last fragment */
+ if (rx_stats->rs_more)
+ return 0;
+
/*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
@@ -966,10 +966,6 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
return -EINVAL;
- /* Only use status info from the last fragment */
- if (rx_stats->rs_more)
- return 0;
-
if (ath9k_process_rate(common, hw, rx_stats, rx_status))
return -EINVAL;
--
1.8.3.4
^ permalink raw reply related
* [PATCH 05/14] ath9k: Fix TSF processing
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
There is no need to calculate the mactime for chained
descriptor packets, so make sure that this is done
only for the last fragment of valid packets.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index b04a971..9fabd5f 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -913,6 +913,22 @@ static void ath9k_process_rssi(struct ath_common *common,
ah->stats.avgbrssi = rssi;
}
+static void ath9k_process_tsf(struct ath_rx_status *rs,
+ struct ieee80211_rx_status *rxs,
+ u64 tsf)
+{
+ u32 tsf_lower = tsf & 0xffffffff;
+
+ rxs->mactime = (tsf & ~0xffffffffULL) | rs->rs_tstamp;
+ if (rs->rs_tstamp > tsf_lower &&
+ unlikely(rs->rs_tstamp - tsf_lower > 0x10000000))
+ rxs->mactime -= 0x100000000ULL;
+
+ if (rs->rs_tstamp < tsf_lower &&
+ unlikely(tsf_lower - rs->rs_tstamp > 0x10000000))
+ rxs->mactime += 0x100000000ULL;
+}
+
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
@@ -922,7 +938,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ieee80211_hdr *hdr,
struct ath_rx_status *rx_stats,
struct ieee80211_rx_status *rx_status,
- bool *decrypt_error)
+ bool *decrypt_error, u64 tsf)
{
struct ieee80211_hw *hw = sc->hw;
struct ath_hw *ah = sc->sc_ah;
@@ -959,6 +975,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (rx_stats->rs_more)
return 0;
+ ath9k_process_tsf(rx_stats, rx_status, tsf);
+
/*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
@@ -1196,7 +1214,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
int dma_type;
u64 tsf = 0;
- u32 tsf_lower = 0;
unsigned long flags;
dma_addr_t new_buf_addr;
@@ -1208,7 +1225,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
tsf = ath9k_hw_gettsf64(ah);
- tsf_lower = tsf & 0xffffffff;
do {
bool decrypt_error = false;
@@ -1249,15 +1265,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
- rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
- if (rs.rs_tstamp > tsf_lower &&
- unlikely(rs.rs_tstamp - tsf_lower > 0x10000000))
- rxs->mactime -= 0x100000000ULL;
-
- if (rs.rs_tstamp < tsf_lower &&
- unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
- rxs->mactime += 0x100000000ULL;
-
if (rs.rs_status & ATH9K_RXERR_PHY) {
ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime);
@@ -1268,7 +1275,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
}
retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs,
- &decrypt_error);
+ &decrypt_error, tsf);
if (retval)
goto requeue_drop_frag;
--
1.8.3.4
^ permalink raw reply related
* [PATCH 06/14] ath9k: Reorder some functions
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 220 +++++++++++++++++-----------------
1 file changed, 110 insertions(+), 110 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9fabd5f..51e7d16 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -929,6 +929,116 @@ static void ath9k_process_tsf(struct ath_rx_status *rs,
rxs->mactime += 0x100000000ULL;
}
+#ifdef CONFIG_ATH9K_DEBUGFS
+static s8 fix_rssi_inv_only(u8 rssi_val)
+{
+ if (rssi_val == 128)
+ rssi_val = 0;
+ return (s8) rssi_val;
+}
+#endif
+
+/* returns 1 if this was a spectral frame, even if not handled. */
+static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
+ struct ath_rx_status *rs, u64 tsf)
+{
+#ifdef CONFIG_ATH9K_DEBUGFS
+ struct ath_hw *ah = sc->sc_ah;
+ u8 bins[SPECTRAL_HT20_NUM_BINS];
+ u8 *vdata = (u8 *)hdr;
+ struct fft_sample_ht20 fft_sample;
+ struct ath_radar_info *radar_info;
+ struct ath_ht20_mag_info *mag_info;
+ int len = rs->rs_datalen;
+ int dc_pos;
+ u16 length, max_magnitude;
+
+ /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
+ * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
+ * yet, but this is supposed to be possible as well.
+ */
+ if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
+ rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
+ rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
+ return 0;
+
+ /* check if spectral scan bit is set. This does not have to be checked
+ * if received through a SPECTRAL phy error, but shouldn't hurt.
+ */
+ radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
+ if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
+ return 0;
+
+ /* Variation in the data length is possible and will be fixed later.
+ * Note that we only support HT20 for now.
+ *
+ * TODO: add HT20_40 support as well.
+ */
+ if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
+ (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
+ return 1;
+
+ fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
+ length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
+ fft_sample.tlv.length = __cpu_to_be16(length);
+
+ fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
+ fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
+ fft_sample.noise = ah->noise;
+
+ switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
+ case 0:
+ /* length correct, nothing to do. */
+ memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
+ break;
+ case -1:
+ /* first byte missing, duplicate it. */
+ memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
+ bins[0] = vdata[0];
+ break;
+ case 2:
+ /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
+ memcpy(bins, vdata, 30);
+ bins[30] = vdata[31];
+ memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
+ break;
+ case 1:
+ /* MAC added 2 extra bytes AND first byte is missing. */
+ bins[0] = vdata[0];
+ memcpy(&bins[0], vdata, 30);
+ bins[31] = vdata[31];
+ memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
+ break;
+ default:
+ return 1;
+ }
+
+ /* DC value (value in the middle) is the blind spot of the spectral
+ * sample and invalid, interpolate it.
+ */
+ dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
+ bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
+
+ /* mag data is at the end of the frame, in front of radar_info */
+ mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
+
+ /* copy raw bins without scaling them */
+ memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
+ fft_sample.max_exp = mag_info->max_exp & 0xf;
+
+ max_magnitude = spectral_max_magnitude(mag_info->all_bins);
+ fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
+ fft_sample.max_index = spectral_max_index(mag_info->all_bins);
+ fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
+ fft_sample.tsf = __cpu_to_be64(tsf);
+
+ ath_debug_send_fft_sample(sc, &fft_sample.tlv);
+ return 1;
+#else
+ return 0;
+#endif
+}
+
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
@@ -1052,116 +1162,6 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common,
rxs->flag &= ~RX_FLAG_DECRYPTED;
}
-#ifdef CONFIG_ATH9K_DEBUGFS
-static s8 fix_rssi_inv_only(u8 rssi_val)
-{
- if (rssi_val == 128)
- rssi_val = 0;
- return (s8) rssi_val;
-}
-#endif
-
-/* returns 1 if this was a spectral frame, even if not handled. */
-static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
- struct ath_rx_status *rs, u64 tsf)
-{
-#ifdef CONFIG_ATH9K_DEBUGFS
- struct ath_hw *ah = sc->sc_ah;
- u8 bins[SPECTRAL_HT20_NUM_BINS];
- u8 *vdata = (u8 *)hdr;
- struct fft_sample_ht20 fft_sample;
- struct ath_radar_info *radar_info;
- struct ath_ht20_mag_info *mag_info;
- int len = rs->rs_datalen;
- int dc_pos;
- u16 length, max_magnitude;
-
- /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
- * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
- * yet, but this is supposed to be possible as well.
- */
- if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
- rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
- rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
- return 0;
-
- /* check if spectral scan bit is set. This does not have to be checked
- * if received through a SPECTRAL phy error, but shouldn't hurt.
- */
- radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
- if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
- return 0;
-
- /* Variation in the data length is possible and will be fixed later.
- * Note that we only support HT20 for now.
- *
- * TODO: add HT20_40 support as well.
- */
- if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
- (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
- return 1;
-
- fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
- length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
- fft_sample.tlv.length = __cpu_to_be16(length);
-
- fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
- fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
- fft_sample.noise = ah->noise;
-
- switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
- case 0:
- /* length correct, nothing to do. */
- memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
- break;
- case -1:
- /* first byte missing, duplicate it. */
- memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
- bins[0] = vdata[0];
- break;
- case 2:
- /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
- memcpy(bins, vdata, 30);
- bins[30] = vdata[31];
- memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
- break;
- case 1:
- /* MAC added 2 extra bytes AND first byte is missing. */
- bins[0] = vdata[0];
- memcpy(&bins[0], vdata, 30);
- bins[31] = vdata[31];
- memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
- break;
- default:
- return 1;
- }
-
- /* DC value (value in the middle) is the blind spot of the spectral
- * sample and invalid, interpolate it.
- */
- dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
- bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
-
- /* mag data is at the end of the frame, in front of radar_info */
- mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
-
- /* copy raw bins without scaling them */
- memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
- fft_sample.max_exp = mag_info->max_exp & 0xf;
-
- max_magnitude = spectral_max_magnitude(mag_info->all_bins);
- fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
- fft_sample.max_index = spectral_max_index(mag_info->all_bins);
- fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
- fft_sample.tsf = __cpu_to_be64(tsf);
-
- ath_debug_send_fft_sample(sc, &fft_sample.tlv);
- return 1;
-#else
- return 0;
-#endif
-}
-
static void ath9k_apply_ampdu_details(struct ath_softc *sc,
struct ath_rx_status *rs, struct ieee80211_rx_status *rxs)
{
--
1.8.3.4
^ permalink raw reply related
* [PATCH 07/14] ath9k: Fix PHY error processing
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Parse the PHY error details only for the last fragment
in case descriptors are chained.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 51e7d16..e18adde 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -803,8 +803,6 @@ static bool ath9k_rx_accept(struct ath_common *common,
rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
mic_error = false;
}
- if (rx_stats->rs_status & ATH9K_RXERR_PHY)
- return false;
if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) ||
(!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) {
@@ -1088,6 +1086,18 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
ath9k_process_tsf(rx_stats, rx_status, tsf);
/*
+ * Process PHY errors and return so that the packet
+ * can be dropped.
+ */
+ if (rx_stats->rs_status & ATH9K_RXERR_PHY) {
+ ath9k_dfs_process_phyerr(sc, hdr, rx_stats, rx_status->mactime);
+ if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
+ RX_STAT_INC(rx_spectral);
+
+ return -EINVAL;
+ }
+
+ /*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
*/
@@ -1265,15 +1275,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
- if (rs.rs_status & ATH9K_RXERR_PHY) {
- ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime);
-
- if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) {
- RX_STAT_INC(rx_spectral);
- goto requeue_drop_frag;
- }
- }
-
retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs,
&decrypt_error, tsf);
if (retval)
--
1.8.3.4
^ permalink raw reply related
* [PATCH 08/14] ath9k: Fix RX debug statistics
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The various error bits that ath_debug_stat_rx()
checks are valid only for the last descriptor for
a chained packet, handle this correctly.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index e18adde..2d0017c 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1084,6 +1084,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
return 0;
ath9k_process_tsf(rx_stats, rx_status, tsf);
+ ath_debug_stat_rx(sc, rx_stats);
/*
* Process PHY errors and return so that the packet
@@ -1270,8 +1271,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
!ieee80211_is_qos_nullfunc(hdr->frame_control))
sc->rx.num_pkts++;
- ath_debug_stat_rx(sc, &rs);
-
rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
--
1.8.3.4
^ permalink raw reply related
* [PATCH 09/14] ath9k: Fix RX packet counter
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Handle chained descriptors and increment the RX counter
only for valid packets. Since this is used only by MCI,
use CONFIG_ATH9K_BTCOEX_SUPPORT.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 2d0017c..823b411 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1119,6 +1119,13 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
sc->rx.discard_next = false;
+
+#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
+ if (ieee80211_is_data_present(hdr->frame_control) &&
+ !ieee80211_is_qos_nullfunc(hdr->frame_control))
+ sc->rx.num_pkts++;
+#endif
+
return 0;
}
@@ -1267,10 +1274,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
hdr = (struct ieee80211_hdr *) (hdr_skb->data +
ah->caps.rx_status_len);
- if (ieee80211_is_data_present(hdr->frame_control) &&
- !ieee80211_is_qos_nullfunc(hdr->frame_control))
- sc->rx.num_pkts++;
-
rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
--
1.8.3.4
^ permalink raw reply related
* [PATCH 10/14] ath9k: Fix RX beacon processing
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Make sure that chained descriptors are handled correctly
before the packet is parsed to determine if it is a beacon.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 48 ++++++++++++++++-------------------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 823b411..090c27e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1037,13 +1037,28 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
#endif
}
+static bool ath9k_is_mybeacon(struct ath_softc *sc, struct ieee80211_hdr *hdr)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (ieee80211_is_beacon(hdr->frame_control)) {
+ RX_STAT_INC(rx_beacons);
+ if (!is_zero_ether_addr(common->curbssid) &&
+ ether_addr_equal(hdr->addr3, common->curbssid))
+ return true;
+ }
+
+ return false;
+}
+
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
* decryption key or real decryption error. This let us keep statistics there.
*/
static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
- struct ieee80211_hdr *hdr,
+ struct sk_buff *skb,
struct ath_rx_status *rx_stats,
struct ieee80211_rx_status *rx_status,
bool *decrypt_error, u64 tsf)
@@ -1051,6 +1066,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ieee80211_hw *hw = sc->hw;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr;
bool discard_current = sc->rx.discard_next;
/*
@@ -1083,6 +1099,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (rx_stats->rs_more)
return 0;
+ hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
+
ath9k_process_tsf(rx_stats, rx_status, tsf);
ath_debug_stat_rx(sc, rx_stats);
@@ -1105,6 +1123,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
return -EINVAL;
+ rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
+
if (ath9k_process_rate(common, hw, rx_stats, rx_status))
return -EINVAL;
@@ -1198,24 +1218,6 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc,
}
}
-static bool ath9k_is_mybeacon(struct ath_softc *sc, struct sk_buff *skb)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_hdr *hdr;
-
- hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
-
- if (ieee80211_is_beacon(hdr->frame_control)) {
- RX_STAT_INC(rx_beacons);
- if (!is_zero_ether_addr(common->curbssid) &&
- ether_addr_equal(hdr->addr3, common->curbssid))
- return true;
- }
-
- return false;
-}
-
int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
{
struct ath_buf *bf;
@@ -1225,7 +1227,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hw *hw = sc->hw;
- struct ieee80211_hdr *hdr;
int retval;
struct ath_rx_status rs;
enum ath9k_rx_qtype qtype;
@@ -1269,15 +1270,10 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
else
hdr_skb = skb;
- rs.is_mybeacon = ath9k_is_mybeacon(sc, hdr_skb);
-
- hdr = (struct ieee80211_hdr *) (hdr_skb->data +
- ah->caps.rx_status_len);
-
rxs = IEEE80211_SKB_RXCB(hdr_skb);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
- retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs,
+ retval = ath9k_rx_skb_preprocess(sc, hdr_skb, &rs, rxs,
&decrypt_error, tsf);
if (retval)
goto requeue_drop_frag;
--
1.8.3.4
^ permalink raw reply related
* [PATCH 11/14] ath9k: Move the RX poll check to preprocess()
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 090c27e..5b84ce4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1124,6 +1124,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
return -EINVAL;
rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
+ if (rx_stats->is_mybeacon) {
+ sc->hw_busy_count = 0;
+ ath_start_rx_poll(sc, 3);
+ }
if (ath9k_process_rate(common, hw, rx_stats, rx_status))
return -EINVAL;
@@ -1278,10 +1282,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
if (retval)
goto requeue_drop_frag;
- if (rs.is_mybeacon) {
- sc->hw_busy_count = 0;
- ath_start_rx_poll(sc, 3);
- }
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
--
1.8.3.4
^ permalink raw reply related
* [PATCH 12/14] ath9k: Handle corrupt descriptors properly
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
The MIC/PHYERR/CRC error bits are valid only for
the last desc. for chained packets. Check this early
in the preprocess() routine and bail out.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 5b84ce4..30cb726 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1099,6 +1099,16 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (rx_stats->rs_more)
return 0;
+ /*
+ * Return immediately if the RX descriptor has been marked
+ * as corrupt based on the various error bits.
+ *
+ * This is different from the other corrupt descriptor
+ * condition handled above.
+ */
+ if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
+ return -EINVAL;
+
hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
ath9k_process_tsf(rx_stats, rx_status, tsf);
@@ -1335,8 +1345,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
sc->rx.frag = skb;
goto requeue;
}
- if (rs.rs_status & ATH9K_RXERR_CORRUPT_DESC)
- goto requeue_drop_frag;
if (sc->rx.frag) {
int space = skb->len - skb_tailroom(hdr_skb);
--
1.8.3.4
^ permalink raw reply related
* [PATCH 13/14] ath9k: Fix error condition for corrupt descriptors
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
In case a descriptor has the "done" bit clear and the
next descriptor has it set, we drop both of them. If
the packet that is received after these two packets
is dropped for some reason, "discard_next" will not cleared.
Fix this.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 30cb726..ec89280 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1068,6 +1068,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hdr *hdr;
bool discard_current = sc->rx.discard_next;
+ int ret = 0;
/*
* Discard corrupt descriptors which are marked in
@@ -1106,8 +1107,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
* This is different from the other corrupt descriptor
* condition handled above.
*/
- if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
- return -EINVAL;
+ if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) {
+ ret = -EINVAL;
+ goto exit;
+ }
hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
@@ -1123,15 +1126,18 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
RX_STAT_INC(rx_spectral);
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}
/*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
*/
- if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
- return -EINVAL;
+ if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
+ ret = -EINVAL;
+ goto exit;
+ }
rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
if (rx_stats->is_mybeacon) {
@@ -1139,8 +1145,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
ath_start_rx_poll(sc, 3);
}
- if (ath9k_process_rate(common, hw, rx_stats, rx_status))
- return -EINVAL;
+ if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
+ ret =-EINVAL;
+ goto exit;
+ }
ath9k_process_rssi(common, hw, hdr, rx_stats);
@@ -1152,15 +1160,15 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
if (rx_stats->rs_moreaggr)
rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
- sc->rx.discard_next = false;
-
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
if (ieee80211_is_data_present(hdr->frame_control) &&
!ieee80211_is_qos_nullfunc(hdr->frame_control))
sc->rx.num_pkts++;
#endif
- return 0;
+exit:
+ sc->rx.discard_next = false;
+ return ret;
}
static void ath9k_rx_skb_postprocess(struct ath_common *common,
--
1.8.3.4
^ permalink raw reply related
* [PATCH 14/14] ath9k: Remove unused function argument
From: Sujith Manoharan @ 2013-08-14 3:41 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1376451682-25862-1-git-send-email-sujith@msujith.org>
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/recv.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ec89280..3b47198 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -885,7 +885,6 @@ static int ath9k_process_rate(struct ath_common *common,
static void ath9k_process_rssi(struct ath_common *common,
struct ieee80211_hw *hw,
- struct ieee80211_hdr *hdr,
struct ath_rx_status *rx_stats)
{
struct ath_softc *sc = hw->priv;
@@ -1150,7 +1149,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
goto exit;
}
- ath9k_process_rssi(common, hw, hdr, rx_stats);
+ ath9k_process_rssi(common, hw, rx_stats);
rx_status->band = hw->conf.chandef.chan->band;
rx_status->freq = hw->conf.chandef.chan->center_freq;
--
1.8.3.4
^ permalink raw reply related
* Re: Signal loss rtl8723ae wifi driver
From: Larry Finger @ 2013-08-14 3:45 UTC (permalink / raw)
To: Phillip Moss; +Cc: linux-wireless
In-Reply-To: <1376411031.31841.YahooMailBasic@web171406.mail.ir2.yahoo.com>
[-- Attachment #1: Type: text/plain, Size: 747 bytes --]
On 08/13/2013 11:23 AM, Phillip Moss wrote:
> Hi all,
> I have a rtl8723ae wifi card on my laptop. When connecting to any wifi Access Point
> the wifi signal fluctuates from full strength to very low. In order to connect and
> stay connected I must be no farther than two meters from my router otherwise I get
> disconnected. I have tried the kernel driver on multiple distros as well as the
> vendor drivers for older kernel versions. All seem to have the same problem. The card
> works ok on Windows 7 with vendor drivers. I have also tried compiling
> backports-3.10-rc1-2 with no luck. During a signal loss period I get no logs but if I
> take the laptop too far from the AP dmesg reports:
Philip,
Could you try the attached patch?
Larry
[-- Attachment #2: rtl8723ae_increase_gain --]
[-- Type: text/plain, Size: 554 bytes --]
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index c72758d..75cf6fe 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -130,7 +130,7 @@ static void _rtl8723ae_query_rxphystatus(struct ieee80211_hw *hw,
/* CCK gain is smaller than OFDM/MCS gain,
* so we add gain diff. From experience, the val is 6
*/
- pwdb_all += 6;
+ pwdb_all += 10;
if (pwdb_all > 100)
pwdb_all = 100;
/* modify the offset to make the same
^ permalink raw reply related
* [PATCH-resend 8/9] ath5k: enable support for 5 MHz and 10 MHz channels
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 1 +
drivers/net/wireless/ath/ath5k/base.c | 25 ++++++++++++++++++++++---
drivers/net/wireless/ath/ath5k/base.h | 2 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +-
4 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 2d691b8..74bd54d 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -29,6 +29,7 @@
#include <linux/average.h>
#include <linux/leds.h>
#include <net/mac80211.h>
+#include <net/cfg80211.h>
/* RX/TX descriptor hw structs
* TODO: Driver part should only see sw structs */
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7c298af..48161ed 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -56,6 +56,7 @@
#include <linux/etherdevice.h>
#include <linux/nl80211.h>
+#include <net/cfg80211.h>
#include <net/ieee80211_radiotap.h>
#include <asm/unaligned.h>
@@ -443,11 +444,27 @@ ath5k_setup_bands(struct ieee80211_hw *hw)
* Called with ah->lock.
*/
int
-ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan)
+ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef)
{
ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
"channel set, resetting (%u -> %u MHz)\n",
- ah->curchan->center_freq, chan->center_freq);
+ ah->curchan->center_freq, chandef->chan->center_freq);
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ ah->ah_bwmode = AR5K_BWMODE_5MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ ah->ah_bwmode = AR5K_BWMODE_10MHZ;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
/*
* To switch channels clear any pending DMA operations;
@@ -455,7 +472,7 @@ ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan)
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(ah, chan, true);
+ return ath5k_reset(ah, chandef->chan, true);
}
void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
@@ -2525,6 +2542,8 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
/* SW support for IBSS_RSN is provided by mac80211 */
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+
/* both antennas can be configured as RX or TX */
hw->wiphy->available_antennas_tx = 0x3;
hw->wiphy->available_antennas_rx = 0x3;
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index ca9a83c..97469d0 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -101,7 +101,7 @@ void ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable);
void ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah,
struct ieee80211_vif *vif);
-int ath5k_chan_set(struct ath5k_hw *ah, struct ieee80211_channel *chan);
+int ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef);
void ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
void ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf);
void ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 40825d4..4ee01f6 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -202,7 +202,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&ah->lock);
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ret = ath5k_chan_set(ah, conf->chandef.chan);
+ ret = ath5k_chan_set(ah, &conf->chandef);
if (ret < 0)
goto unlock;
}
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 0/9] ath5k/ath9k: respin/resend 5/10 MHz and CSA patches
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich
This series contains the rebased patches for 5/10 MHz and channel switch
announcement for ath5k/ath9k as sent in their respective series earlier. No
modification was made. Since Johannes picked the nl/cfg/mac80211 parts
only, these patches are still missing in the tree. John reported some
trouble building with these patches, but I couldn't see any problems here.
The series is based on wireless-testing of todays master. Please tell
me if there are any problems (including compiler errors and kernel config)
so I can rework if neccesary.
Thanks!
Simon
Simon Wunderlich (9):
ath9k: always use SIFS times from OFDM for 5/10 MHz
ath9k: use chandef instead of channel_type
ath9k: report 5/10 MHz channels
ath9k: set 5/10 MHz supported channels and fix bitrate
ath9k: announce that ath9k supports 5/10 MHz
ath5k: report 5/10 MHz channels
ath5k: set 5/10 MHz supported channels and fix duration
ath5k: enable support for 5 MHz and 10 MHz channels
ath9k: enable CSA functionality in ath9k
drivers/net/wireless/ath/ath5k/ath5k.h | 1 +
drivers/net/wireless/ath/ath5k/base.c | 59 ++++++++++++++++++----
drivers/net/wireless/ath/ath5k/base.h | 2 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +-
drivers/net/wireless/ath/ath5k/pcu.c | 2 +
drivers/net/wireless/ath/ath5k/qcu.c | 25 ++++++++-
drivers/net/wireless/ath/ath9k/ath9k.h | 2 +
drivers/net/wireless/ath/ath9k/beacon.c | 21 ++++++++
drivers/net/wireless/ath/ath9k/common.c | 67 +++++++++++++++----------
drivers/net/wireless/ath/ath9k/common.h | 3 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 +-
drivers/net/wireless/ath/ath9k/hw.c | 5 +-
drivers/net/wireless/ath/ath9k/init.c | 30 +++++++----
drivers/net/wireless/ath/ath9k/main.c | 25 +++++++--
drivers/net/wireless/ath/ath9k/rc.c | 9 +++-
drivers/net/wireless/ath/ath9k/recv.c | 11 ++++
drivers/net/wireless/ath/ath9k/xmit.c | 2 +
17 files changed, 206 insertions(+), 65 deletions(-)
--
1.7.10.4
^ permalink raw reply
* [PATCH-resend 3/9] ath9k: report 5/10 MHz channels
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath9k/recv.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 62dff97..1e0a08e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -865,6 +865,17 @@ static int ath9k_process_rate(struct ath_common *common,
band = hw->conf.chandef.chan->band;
sband = hw->wiphy->bands[band];
+ switch (hw->conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_5:
+ rxs->flag |= RX_FLAG_5MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ rxs->flag |= RX_FLAG_10MHZ;
+ break;
+ default:
+ break;
+ }
+
if (rx_stats->rs_rate & 0x80) {
/* HT rate */
rxs->flag |= RX_FLAG_HT;
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 7/9] ath5k: set 5/10 MHz supported channels and fix duration
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath5k/base.c | 24 ++++++++++++++++--------
drivers/net/wireless/ath/ath5k/pcu.c | 2 ++
drivers/net/wireless/ath/ath5k/qcu.c | 25 ++++++++++++++++++++++++-
3 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 260a6fc..7c298af 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -165,28 +165,36 @@ static const struct ieee80211_rate ath5k_rates[] = {
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 60,
.hw_value = ATH5K_RATE_CODE_6M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 90,
.hw_value = ATH5K_RATE_CODE_9M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 120,
.hw_value = ATH5K_RATE_CODE_12M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 180,
.hw_value = ATH5K_RATE_CODE_18M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 240,
.hw_value = ATH5K_RATE_CODE_24M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 360,
.hw_value = ATH5K_RATE_CODE_36M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 480,
.hw_value = ATH5K_RATE_CODE_48M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
{ .bitrate = 540,
.hw_value = ATH5K_RATE_CODE_54M,
- .flags = 0 },
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
};
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 1f16b42..c60d36a 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -144,11 +144,13 @@ ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum ieee80211_band band,
sifs = AR5K_INIT_SIFS_HALF_RATE;
preamble *= 2;
sym_time *= 2;
+ bitrate = DIV_ROUND_UP(bitrate, 2);
break;
case AR5K_BWMODE_5MHZ:
sifs = AR5K_INIT_SIFS_QUARTER_RATE;
preamble *= 4;
sym_time *= 4;
+ bitrate = DIV_ROUND_UP(bitrate, 4);
break;
default:
sifs = AR5K_INIT_SIFS_DEFAULT_BG;
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 65fe929..0583c69 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -566,9 +566,11 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
enum ieee80211_band band;
+ struct ieee80211_supported_band *sband;
struct ieee80211_rate *rate;
u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock;
u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time);
+ u32 rate_flags, i;
if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX)
return -EINVAL;
@@ -605,7 +607,28 @@ int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time)
else
band = IEEE80211_BAND_2GHZ;
- rate = &ah->sbands[band].bitrates[0];
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_5MHZ:
+ rate_flags = IEEE80211_RATE_SUPPORTS_5MHZ;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ rate_flags = IEEE80211_RATE_SUPPORTS_10MHZ;
+ break;
+ default:
+ rate_flags = 0;
+ break;
+ }
+ sband = &ah->sbands[band];
+ rate = NULL;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
+ continue;
+ rate = &sband->bitrates[i];
+ break;
+ }
+ if (WARN_ON(!rate))
+ return -EINVAL;
+
ack_tx_time = ath5k_hw_get_frame_duration(ah, band, 10, rate, false);
/* ack_tx_time includes an SIFS already */
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 5/9] ath9k: announce that ath9k supports 5/10 MHz
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath9k/init.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 6347378..60bb4d6 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -860,6 +860,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
#ifdef CONFIG_PM_SLEEP
if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 9/9] ath9k: enable CSA functionality in ath9k
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
CSA is only enabled for one interface, but the same limitation applies
for mac80211 too. It checks whether the beacon has been sent (different
approaches for non-EDMA-enabled and EDMA-enabled devices), and completes
the channel switch after that.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to PATCHv2:
* announce support for channel switch
Changes to PATCHv1:
* complete channel switch after the last beacon has been sent
---
drivers/net/wireless/ath/ath9k/ath9k.h | 2 ++
drivers/net/wireless/ath/ath9k/beacon.c | 21 +++++++++++++++++++++
drivers/net/wireless/ath/ath9k/init.c | 1 +
drivers/net/wireless/ath/ath9k/main.c | 17 +++++++++++++++++
drivers/net/wireless/ath/ath9k/xmit.c | 2 ++
5 files changed, 43 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 505c615..de050e2 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -427,6 +427,7 @@ void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_set_beacon(struct ath_softc *sc);
+bool ath9k_csa_is_finished(struct ath_softc *sc);
/*******************/
/* Link Monitoring */
@@ -763,6 +764,7 @@ struct ath_softc {
#endif
struct ath_descdma txsdma;
+ struct ieee80211_vif *csa_vif;
struct ath_ant_comb ant_comb;
u8 ant_tx, ant_rx;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 1a17732..b5c16b3a 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -291,6 +291,23 @@ void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
(unsigned long long)tsfadjust, avp->av_bslot);
}
+bool ath9k_csa_is_finished(struct ath_softc *sc)
+{
+ struct ieee80211_vif *vif;
+
+ vif = sc->csa_vif;
+ if (!vif || !vif->csa_active)
+ return false;
+
+ if (!ieee80211_csa_is_complete(vif))
+ return false;
+
+ ieee80211_csa_finish(vif);
+
+ sc->csa_vif = NULL;
+ return true;
+}
+
void ath9k_beacon_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
@@ -336,6 +353,10 @@ void ath9k_beacon_tasklet(unsigned long data)
return;
}
+ /* EDMA devices check that in the tx completion function. */
+ if (!edma && ath9k_csa_is_finished(sc))
+ return;
+
slot = ath9k_beacon_choose_slot(sc);
vif = sc->beacon.bslot[slot];
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 60bb4d6..abf1eb5 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -861,6 +861,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+ hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
#ifdef CONFIG_PM_SLEEP
if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index bddc574..016d1bc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1032,6 +1032,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
if (ath9k_uses_beacons(vif->type))
ath9k_beacon_remove_slot(sc, vif);
+ if (sc->csa_vif == vif)
+ sc->csa_vif = NULL;
+
ath9k_ps_wakeup(sc);
ath9k_calculate_summary_state(hw, NULL);
ath9k_ps_restore(sc);
@@ -2318,6 +2321,19 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
clear_bit(SC_OP_SCANNING, &sc->sc_flags);
}
+static void ath9k_channel_switch_beacon(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef)
+{
+ struct ath_softc *sc = hw->priv;
+
+ /* mac80211 does not support CSA in multi-if cases (yet) */
+ if (WARN_ON(sc->csa_vif))
+ return;
+
+ sc->csa_vif = vif;
+}
+
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
@@ -2366,4 +2382,5 @@ struct ieee80211_ops ath9k_ops = {
#endif
.sw_scan_start = ath9k_sw_scan_start,
.sw_scan_complete = ath9k_sw_scan_complete,
+ .channel_switch_beacon = ath9k_channel_switch_beacon,
};
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index d8dfb3e..f587c7e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2569,6 +2569,8 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
if (ts.qid == sc->beacon.beaconq) {
sc->beacon.tx_processed = true;
sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK);
+
+ ath9k_csa_is_finished(sc);
continue;
}
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 1/9] ath9k: always use SIFS times from OFDM for 5/10 MHz
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
5/10 MHz channels should always use SIFS times as defined in IEEE
802.11-2012 18.4.4 (OFDM PHY characteristics). This makes it compatible
to ath5k, which does the same.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath9k/hw.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 151443b..b3a6891 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1069,7 +1069,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 11;
- sifstime *= 2;
+ sifstime = 32;
ack_offset = 16;
slottime = 13;
} else if (IS_CHAN_QUARTER_RATE(chan)) {
@@ -1079,7 +1079,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
tx_lat += 22;
- sifstime *= 4;
+ sifstime = 64;
ack_offset = 32;
slottime = 21;
} else {
@@ -1116,7 +1116,6 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ctstimeout += 48 - sifstime - ah->slottime;
}
-
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 2/9] ath9k: use chandef instead of channel_type
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
To enable support for 5/10 MHz, some internal functions must be
converted from using the (old) channel_type to chandef. This is a good
chance to change all remaining occurences.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath9k/common.c | 67 +++++++++++++++----------
drivers/net/wireless/ath/ath9k/common.h | 3 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 +-
drivers/net/wireless/ath/ath9k/init.c | 4 +-
drivers/net/wireless/ath/ath9k/main.c | 8 ++-
drivers/net/wireless/ath/ath9k/rc.c | 4 +-
6 files changed, 51 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index 344fdde..d3063c2 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -49,37 +49,40 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
}
EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype);
-static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+static u32 ath9k_get_extchanmode(struct cfg80211_chan_def *chandef)
{
u32 chanmode = 0;
- switch (chan->band) {
+ switch (chandef->chan->band) {
case IEEE80211_BAND_2GHZ:
- switch (channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
chanmode = CHANNEL_G_HT20;
break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_G_HT40PLUS;
+ case NL80211_CHAN_WIDTH_40:
+ if (chandef->center_freq1 > chandef->chan->center_freq)
+ chanmode = CHANNEL_G_HT40PLUS;
+ else
+ chanmode = CHANNEL_G_HT40MINUS;
break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_G_HT40MINUS;
+ default:
break;
}
break;
case IEEE80211_BAND_5GHZ:
- switch (channel_type) {
- case NL80211_CHAN_NO_HT:
- case NL80211_CHAN_HT20:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
chanmode = CHANNEL_A_HT20;
break;
- case NL80211_CHAN_HT40PLUS:
- chanmode = CHANNEL_A_HT40PLUS;
+ case NL80211_CHAN_WIDTH_40:
+ if (chandef->center_freq1 > chandef->chan->center_freq)
+ chanmode = CHANNEL_A_HT40PLUS;
+ else
+ chanmode = CHANNEL_A_HT40MINUS;
break;
- case NL80211_CHAN_HT40MINUS:
- chanmode = CHANNEL_A_HT40MINUS;
+ default:
break;
}
break;
@@ -94,13 +97,12 @@ static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan,
* Update internal channel flags.
*/
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type)
+ struct cfg80211_chan_def *chandef)
{
- ichan->channel = chan->center_freq;
- ichan->chan = chan;
+ ichan->channel = chandef->chan->center_freq;
+ ichan->chan = chandef->chan;
- if (chan->band == IEEE80211_BAND_2GHZ) {
+ if (chandef->chan->band == IEEE80211_BAND_2GHZ) {
ichan->chanmode = CHANNEL_G;
ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
} else {
@@ -108,8 +110,22 @@ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
}
- if (channel_type != NL80211_CHAN_NO_HT)
- ichan->chanmode = ath9k_get_extchanmode(chan, channel_type);
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ ichan->channelFlags |= CHANNEL_QUARTER;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ ichan->channelFlags |= CHANNEL_HALF;
+ break;
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ ichan->chanmode = ath9k_get_extchanmode(chandef);
+ break;
+ default:
+ WARN_ON(1);
+ }
}
EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
@@ -125,8 +141,7 @@ struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
chan_idx = curchan->hw_value;
channel = &ah->channels[chan_idx];
- ath9k_cmn_update_ichannel(channel, curchan,
- cfg80211_get_chandef_type(&hw->conf.chandef));
+ ath9k_cmn_update_ichannel(channel, &hw->conf.chandef);
return channel;
}
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 207d069..e039bcb 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -44,8 +44,7 @@
int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type);
+ struct cfg80211_chan_def *chandef);
struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
struct ath_hw *ah);
int ath9k_cmn_count_streams(unsigned int chainmask, int max);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 5c1bec1..d442581 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1203,16 +1203,13 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) {
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- enum nl80211_channel_type channel_type =
- cfg80211_get_chandef_type(&hw->conf.chandef);
int pos = curchan->hw_value;
ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
curchan->center_freq);
ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
- hw->conf.chandef.chan,
- channel_type);
+ &hw->conf.chandef);
if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 3b56c2e..85015bf 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -726,13 +726,15 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
struct ath_hw *ah = sc->sc_ah;
+ struct cfg80211_chan_def chandef;
int i;
sband = &sc->sbands[band];
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
ah->curchan = &ah->channels[chan->hw_value];
- ath9k_cmn_update_ichannel(ah->curchan, chan, NL80211_CHAN_HT20);
+ cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20);
+ ath9k_cmn_update_ichannel(ah->curchan, &chandef);
ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 911744f..bddc574 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1201,8 +1201,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- enum nl80211_channel_type channel_type =
- cfg80211_get_chandef_type(&conf->chandef);
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
@@ -1210,8 +1208,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
- ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n",
- curchan->center_freq, channel_type);
+ ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
+ curchan->center_freq, hw->conf.chandef.width);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
@@ -1219,7 +1217,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
spin_unlock_irqrestore(&common->cc_lock, flags);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
- curchan, channel_type);
+ &conf->chandef);
/*
* If the operating channel changes, change the survey in-use flags
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index a3c4ca0..e41f563 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1326,8 +1326,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
ath_rc_init(sc, priv_sta);
ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG,
- "Operating HT Bandwidth changed to: %d\n",
- cfg80211_get_chandef_type(&sc->hw->conf.chandef));
+ "Operating Bandwidth changed to: %d\n",
+ &sc->hw->conf.chandef->width);
}
}
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 6/9] ath5k: report 5/10 MHz channels
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
drivers/net/wireless/ath/ath5k/base.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ce67ab7..260a6fc 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1400,6 +1400,16 @@ ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate);
rxs->flag |= ath5k_rx_decrypted(ah, skb, rs);
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_5MHZ:
+ rxs->flag |= RX_FLAG_5MHZ;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ rxs->flag |= RX_FLAG_10MHZ;
+ break;
+ default:
+ break;
+ }
if (rxs->rate_idx >= 0 && rs->rs_rate ==
ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short)
--
1.7.10.4
^ permalink raw reply related
* [PATCH-resend 4/9] ath9k: set 5/10 MHz supported channels and fix bitrate
From: Simon Wunderlich @ 2013-08-14 6:01 UTC (permalink / raw)
To: linville; +Cc: linux-wireless, Simon Wunderlich, Mathias Kretschmer
In-Reply-To: <1376460098-26648-1-git-send-email-siwu@hrz.tu-chemnitz.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
---
Changes to PATCHv4:
* remove unused divisor line in the rate control
---
drivers/net/wireless/ath/ath9k/init.c | 24 ++++++++++++++++--------
drivers/net/wireless/ath/ath9k/rc.c | 5 +++++
2 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 85015bf..6347378 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -146,14 +146,22 @@ static struct ieee80211_rate ath9k_legacy_rates[] = {
RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
- RATE(60, 0x0b, 0),
- RATE(90, 0x0f, 0),
- RATE(120, 0x0a, 0),
- RATE(180, 0x0e, 0),
- RATE(240, 0x09, 0),
- RATE(360, 0x0d, 0),
- RATE(480, 0x08, 0),
- RATE(540, 0x0c, 0),
+ RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
+ RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ)),
};
#ifdef CONFIG_MAC80211_LEDS
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index e41f563..5a69d9b 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1282,9 +1282,14 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_rate_priv *ath_rc_priv = priv_sta;
int i, j = 0;
+ u32 rate_flags = ieee80211_chandef_rate_flags(&sc->hw->conf.chandef);
for (i = 0; i < sband->n_bitrates; i++) {
if (sta->supp_rates[sband->band] & BIT(i)) {
+ if ((rate_flags & sband->bitrates[i].flags)
+ != rate_flags)
+ continue;
+
ath_rc_priv->neg_rates.rs_rates[j]
= (sband->bitrates[i].bitrate * 2) / 10;
j++;
--
1.7.10.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox