* [PATCH v3 tip/core/rcu 10/14] mac80211: Apply ACCESS_ONCE() to avoid sparse false positive
From: Paul E. McKenney @ 2013-10-11 23:17 UTC (permalink / raw)
To: linux-kernel
Cc: mingo, laijs, dipankar, akpm, mathieu.desnoyers, josh, niv, tglx,
peterz, rostedt, dhowells, edumazet, darren, fweisbec, sbw,
Paul E. McKenney, John W. Linville, Johannes Berg,
David S. Miller, linux-wireless, netdev
In-Reply-To: <1381533451-29018-1-git-send-email-paulmck@linux.vnet.ibm.com>
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
The sparse checking for rcu_assign_pointer() was recently upgraded
to reject non-__kernel address spaces. This also rejects __rcu,
which is almost always the right thing to do. However, the uses in
sta_info_hash_del() are legitimate: They are assigning a pointer to an
element from an RCU-protected list, and all elements of this list are
already visible to caller.
This commit therefore silences this false positive by laundering the
pointer using ACCESS_ONCE() as suggested by Eric Dumazet and Josh
Triplett.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
net/mac80211/sta_info.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index aeb967a0aeed..494f03c0831f 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -74,8 +74,8 @@ static int sta_info_hash_del(struct ieee80211_local *local,
if (!s)
return -ENOENT;
if (s == sta) {
- rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)],
- s->hnext);
+ /* Both --rcu and visible, so ACCESS_ONCE() is OK. */
+ ACCESS_ONCE(local->sta_hash[STA_HASH(sta->sta.addr)]) = s->hnext;
return 0;
}
@@ -84,7 +84,8 @@ static int sta_info_hash_del(struct ieee80211_local *local,
s = rcu_dereference_protected(s->hnext,
lockdep_is_held(&local->sta_mtx));
if (rcu_access_pointer(s->hnext)) {
- rcu_assign_pointer(s->hnext, sta->hnext);
+ /* Both --rcu and visible, so ACCESS_ONCE() is OK. */
+ ACCESS_ONCE(s->hnext) = sta->hnext;
return 0;
}
--
1.8.1.5
^ permalink raw reply related
* Re: [PATCH] mac80211: Add rate-control name to station debugfs.
From: Ben Greear @ 2013-10-11 21:40 UTC (permalink / raw)
To: Felix Fietkau; +Cc: linux-wireless
In-Reply-To: <52586DA9.5050204@openwrt.org>
On 10/11/2013 02:29 PM, Felix Fietkau wrote:
> On 2013-10-11 11:04 PM, greearb@candelatech.com wrote:
>> From: Ben Greear <greearb@candelatech.com>
>>
>> Nice to see what algorithm it's actually using.
> No need for that, you can use this:
> # cat /sys/kernel/debug/ieee80211/phy0/rc/name
Ok, that should work for me. But, is there any reason we cannot
have a different rate control alg for different stations on same
phy?
I am thinking of allowing such configuration if possible...the
better to compare various rate ctrl algorithms...
Thanks,
Ben
>
> - Felix
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
^ permalink raw reply
* [PATCH v2 02/10] ath9k_hw: remove direct accesses to channel mode flags
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Use wrappers where available. Simplifies code and helps with further
improvements to the channel data structure
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ani.c | 6 +-
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 35 ++-------
drivers/net/wireless/ath/ath9k/ar9002_hw.c | 26 +------
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 105 ++++++--------------------
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 26 +------
drivers/net/wireless/ath/ath9k/hw.c | 7 +-
drivers/net/wireless/ath/ath9k/hw.h | 2 +
drivers/net/wireless/ath/ath9k/mci.c | 8 +-
drivers/net/wireless/ath/ath9k/xmit.c | 3 +-
9 files changed, 49 insertions(+), 169 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index be466b0..d28923b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -338,10 +338,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
aniState->cckNoiseImmunityLevel !=
ATH9K_ANI_CCK_DEF_LEVEL) {
ath_dbg(common, ANI,
- "Restore defaults: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n",
+ "Restore defaults: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n",
ah->opmode,
chan->channel,
- chan->channelFlags,
is_scanning,
aniState->ofdmNoiseImmunityLevel,
aniState->cckNoiseImmunityLevel);
@@ -354,10 +353,9 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
* restore historical levels for this channel
*/
ath_dbg(common, ANI,
- "Restore history: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n",
+ "Restore history: opmode %u chan %d Mhz is_scanning=%d ofdm:%d cck:%d\n",
ah->opmode,
chan->channel,
- chan->channelFlags,
is_scanning,
aniState->ofdmNoiseImmunityLevel,
aniState->cckNoiseImmunityLevel);
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index cb6435e..2bfa6fb 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -666,8 +666,7 @@ static void ar5008_hw_set_channel_regs(struct ath_hw *ah,
if (IS_CHAN_HT40(chan)) {
phymode |= AR_PHY_FC_DYN2040_EN;
- if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
- (chan->chanmode == CHANNEL_G_HT40PLUS))
+ if (IS_CHAN_HT40PLUS(chan))
phymode |= AR_PHY_FC_DYN2040_PRI_CH;
}
@@ -691,31 +690,12 @@ static int ar5008_hw_process_ini(struct ath_hw *ah,
int i, regWrites = 0;
u32 modesIndex, freqIndex;
- switch (chan->chanmode) {
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- modesIndex = 1;
+ if (IS_CHAN_5GHZ(chan)) {
freqIndex = 1;
- break;
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- modesIndex = 2;
- freqIndex = 1;
- break;
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_B:
- modesIndex = 4;
- freqIndex = 2;
- break;
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- modesIndex = 3;
+ modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+ } else {
freqIndex = 2;
- break;
-
- default:
- return -EINVAL;
+ modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
}
/*
@@ -1218,12 +1198,11 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
iniDef = &aniState->iniDef;
- ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
+ ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n",
ah->hw_version.macVersion,
ah->hw_version.macRev,
ah->opmode,
- chan->channel,
- chan->channelFlags);
+ chan->channel);
val = REG_READ(ah, AR_PHY_SFCORR);
iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index fb61b08..5c95fd9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -419,28 +419,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan)
u32 modesIndex;
int i;
- switch (chan->chanmode) {
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- modesIndex = 1;
- break;
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- modesIndex = 2;
- break;
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_B:
- modesIndex = 4;
- break;
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- modesIndex = 3;
- break;
-
- default:
- return;
- }
+ if (IS_CHAN_5GHZ(chan))
+ modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+ else
+ modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
ENABLE_REGWRITE_BUFFER(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 0131ba2..7249844 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -551,8 +551,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
if (IS_CHAN_HT40(chan)) {
phymode |= AR_PHY_GC_DYN2040_EN;
/* Configure control (primary) channel at +-10MHz */
- if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
- (chan->chanmode == CHANNEL_G_HT40PLUS))
+ if (IS_CHAN_HT40PLUS(chan))
phymode |= AR_PHY_GC_DYN2040_PRI_CH;
}
@@ -682,41 +681,22 @@ static int ar9550_hw_get_modes_txgain_index(struct ath_hw *ah,
{
int ret;
- switch (chan->chanmode) {
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- if (chan->channel <= 5350)
- ret = 1;
- else if ((chan->channel > 5350) && (chan->channel <= 5600))
- ret = 3;
+ if (IS_CHAN_2GHZ(chan)) {
+ if (IS_CHAN_HT40(chan))
+ return 7;
else
- ret = 5;
- break;
-
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- if (chan->channel <= 5350)
- ret = 2;
- else if ((chan->channel > 5350) && (chan->channel <= 5600))
- ret = 4;
- else
- ret = 6;
- break;
-
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_B:
- ret = 8;
- break;
+ return 8;
+ }
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- ret = 7;
- break;
+ if (chan->channel <= 5350)
+ ret = 1;
+ else if ((chan->channel > 5350) && (chan->channel <= 5600))
+ ret = 3;
+ else
+ ret = 5;
- default:
- ret = -EINVAL;
- }
+ if (IS_CHAN_HT40(chan))
+ ret++;
return ret;
}
@@ -727,28 +707,10 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
unsigned int regWrites = 0, i;
u32 modesIndex;
- switch (chan->chanmode) {
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- modesIndex = 1;
- break;
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- modesIndex = 2;
- break;
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_B:
- modesIndex = 4;
- break;
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- modesIndex = 3;
- break;
-
- default:
- return -EINVAL;
- }
+ if (IS_CHAN_5GHZ(chan))
+ modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+ else
+ modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
/*
* SOC, MAC, BB, RADIO initvals.
@@ -1273,12 +1235,11 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
aniState = &ah->ani;
iniDef = &aniState->iniDef;
- ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
+ ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz\n",
ah->hw_version.macVersion,
ah->hw_version.macRev,
ah->opmode,
- chan->channel,
- chan->channelFlags);
+ chan->channel);
val = REG_READ(ah, AR_PHY_SFCORR);
iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
@@ -1536,28 +1497,10 @@ static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
unsigned int regWrites = 0;
u32 modesIndex;
- switch (chan->chanmode) {
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- modesIndex = 1;
- break;
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- modesIndex = 2;
- break;
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_B:
- modesIndex = 4;
- break;
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- modesIndex = 3;
- break;
-
- default:
- return -EINVAL;
- }
+ if (IS_CHAN_5GHZ(chan))
+ modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+ else
+ modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
if (modesIndex == ah->modes_index) {
*ini_reloaded = false;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index d442581..fa71af1 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -24,30 +24,10 @@
static enum htc_phymode ath9k_htc_get_curmode(struct ath9k_htc_priv *priv,
struct ath9k_channel *ichan)
{
- enum htc_phymode mode;
-
- mode = -EINVAL;
-
- switch (ichan->chanmode) {
- case CHANNEL_G:
- case CHANNEL_G_HT20:
- case CHANNEL_G_HT40PLUS:
- case CHANNEL_G_HT40MINUS:
- mode = HTC_MODE_11NG;
- break;
- case CHANNEL_A:
- case CHANNEL_A_HT20:
- case CHANNEL_A_HT40PLUS:
- case CHANNEL_A_HT40MINUS:
- mode = HTC_MODE_11NA;
- break;
- default:
- break;
- }
-
- WARN_ON(mode < 0);
+ if (IS_CHAN_5GHZ(ichan))
+ return HTC_MODE_11NA;
- return mode;
+ return HTC_MODE_11NG;
}
bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f11e838..7c4d600 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -294,8 +294,7 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
return;
}
- if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
- (chan->chanmode == CHANNEL_G_HT40PLUS)) {
+ if (IS_CHAN_HT40PLUS(chan)) {
centers->synth_center =
chan->channel + HT40_CHANNEL_CENTER_SHIFT;
extoff = 1;
@@ -1510,9 +1509,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
int r;
if (pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) {
- u32 cur = ah->curchan->channelFlags & (CHANNEL_2GHZ | CHANNEL_5GHZ);
- u32 new = chan->channelFlags & (CHANNEL_2GHZ | CHANNEL_5GHZ);
- band_switch = (cur != new);
+ band_switch = IS_CHAN_5GHZ(ah->curchan) != IS_CHAN_5GHZ(chan);
mode_diff = (chan->chanmode != ah->curchan->chanmode);
}
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 2babf93..102b3b6 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -463,6 +463,8 @@ struct ath9k_channel {
((_c)->chanmode == CHANNEL_G_HT40PLUS) || \
((_c)->chanmode == CHANNEL_G_HT40MINUS))
#define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c)))
+#define IS_CHAN_HT40PLUS(_c) ((_c)->chanmode & CHANNEL_HT40PLUS)
+#define IS_CHAN_HT40MINUS(_c) ((_c)->chanmode & CHANNEL_HT40MINUS)
enum ath9k_power_mode {
ATH9K_PM_AWAKE = 0,
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 815bee2..0ac1b5f 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -661,9 +661,9 @@ void ath9k_mci_update_wlan_channels(struct ath_softc *sc, bool allow_all)
chan_start = wlan_chan - 10;
chan_end = wlan_chan + 10;
- if (chan->chanmode == CHANNEL_G_HT40PLUS)
+ if (IS_CHAN_HT40PLUS(chan))
chan_end += 20;
- else if (chan->chanmode == CHANNEL_G_HT40MINUS)
+ else if (IS_CHAN_HT40MINUS(chan))
chan_start -= 20;
/* adjust side band */
@@ -707,11 +707,11 @@ void ath9k_mci_set_txpower(struct ath_softc *sc, bool setchannel,
if (setchannel) {
struct ath9k_hw_cal_data *caldata = &sc->caldata;
- if ((caldata->chanmode == CHANNEL_G_HT40PLUS) &&
+ if (IS_CHAN_HT40PLUS(ah->curchan) &&
(ah->curchan->channel > caldata->channel) &&
(ah->curchan->channel <= caldata->channel + 20))
return;
- if ((caldata->chanmode == CHANNEL_G_HT40MINUS) &&
+ if (IS_CHAN_HT40MINUS(ah->curchan) &&
(ah->curchan->channel < caldata->channel) &&
(ah->curchan->channel >= caldata->channel - 20))
return;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 1ce8af2..08ba590 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2037,8 +2037,7 @@ u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
struct ath_hw *ah = sc->sc_ah;
struct ath9k_channel *curchan = ah->curchan;
- if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) &&
- (curchan->channelFlags & CHANNEL_5GHZ) &&
+ if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && IS_CHAN_5GHZ(curchan) &&
(chainmask == 0x7) && (rate < 0x90))
return 0x3;
else if (AR_SREV_9462(ah) && ath9k_hw_btcoex_is_enabled(ah) &&
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 07/10] ath9k: move channel change code to ath_set_channel
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Preparation for adding the scanning state machine to ath9k
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/main.c | 150 ++++++++++++++++++----------------
1 file changed, 78 insertions(+), 72 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2a86047..bc89823 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -312,17 +312,91 @@ out:
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
-static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *hchan)
+static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chandef)
{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath9k_channel *hchan;
+ struct ieee80211_channel *chan = chandef->chan;
+ unsigned long flags;
+ bool offchannel;
+ int pos = chan->hw_value;
+ int old_pos = -1;
int r;
if (test_bit(SC_OP_INVALID, &sc->sc_flags))
return -EIO;
+ offchannel = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
+
+ if (ah->curchan)
+ old_pos = ah->curchan - &ah->channels[0];
+
+ ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
+ chan->center_freq, chandef->width);
+
+ /* update survey stats for the old channel before switching */
+ spin_lock_irqsave(&common->cc_lock, flags);
+ ath_update_survey_stats(sc);
+ spin_unlock_irqrestore(&common->cc_lock, flags);
+
+ ath9k_cmn_get_channel(hw, ah, chandef);
+
+ /*
+ * If the operating channel changes, change the survey in-use flags
+ * along with it.
+ * Reset the survey data for the new channel, unless we're switching
+ * back to the operating channel from an off-channel operation.
+ */
+ if (!offchannel && sc->cur_survey != &sc->survey[pos]) {
+ if (sc->cur_survey)
+ sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
+
+ sc->cur_survey = &sc->survey[pos];
+
+ memset(sc->cur_survey, 0, sizeof(struct survey_info));
+ sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
+ } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
+ memset(&sc->survey[pos], 0, sizeof(struct survey_info));
+ }
+
+ hchan = &sc->sc_ah->channels[pos];
r = ath_reset_internal(sc, hchan);
+ if (r)
+ return r;
- return r;
+ /*
+ * The most recent snapshot of channel->noisefloor for the old
+ * channel is only available after the hardware reset. Copy it to
+ * the survey stats now.
+ */
+ if (old_pos >= 0)
+ ath_update_survey_nf(sc, old_pos);
+
+ /*
+ * Enable radar pulse detection if on a DFS channel. Spectral
+ * scanning and radar detection can not be used concurrently.
+ */
+ if (hw->conf.radar_enabled) {
+ u32 rxfilter;
+
+ /* set HW specific DFS configuration */
+ ath9k_hw_set_radar_params(ah);
+ rxfilter = ath9k_hw_getrxfilter(ah);
+ rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
+ ATH9K_RX_FILTER_PHYERR;
+ ath9k_hw_setrxfilter(ah, rxfilter);
+ ath_dbg(common, DFS, "DFS enabled at freq %d\n",
+ chan->center_freq);
+ } else {
+ /* perform spectral scan if requested. */
+ if (test_bit(SC_OP_SCANNING, &sc->sc_flags) &&
+ sc->spectral_mode == SPECTRAL_CHANSCAN)
+ ath9k_spectral_scan_trigger(hw);
+ }
+
+ return 0;
}
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
@@ -1207,80 +1281,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
}
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
- struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- int pos = curchan->hw_value;
- int old_pos = -1;
- unsigned long flags;
-
- if (ah->curchan)
- old_pos = ah->curchan - &ah->channels[0];
-
- ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
- curchan->center_freq, hw->conf.chandef.width);
-
- /* update survey stats for the old channel before switching */
- spin_lock_irqsave(&common->cc_lock, flags);
- ath_update_survey_stats(sc);
- spin_unlock_irqrestore(&common->cc_lock, flags);
-
- ath9k_cmn_get_channel(hw, ah, &conf->chandef);
-
- /*
- * If the operating channel changes, change the survey in-use flags
- * along with it.
- * Reset the survey data for the new channel, unless we're switching
- * back to the operating channel from an off-channel operation.
- */
- if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
- sc->cur_survey != &sc->survey[pos]) {
-
- if (sc->cur_survey)
- sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
-
- sc->cur_survey = &sc->survey[pos];
-
- memset(sc->cur_survey, 0, sizeof(struct survey_info));
- sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
- } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
- memset(&sc->survey[pos], 0, sizeof(struct survey_info));
- }
-
- if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
+ if (ath_set_channel(sc, &hw->conf.chandef) < 0) {
ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return -EINVAL;
}
-
- /*
- * The most recent snapshot of channel->noisefloor for the old
- * channel is only available after the hardware reset. Copy it to
- * the survey stats now.
- */
- if (old_pos >= 0)
- ath_update_survey_nf(sc, old_pos);
-
- /*
- * Enable radar pulse detection if on a DFS channel. Spectral
- * scanning and radar detection can not be used concurrently.
- */
- if (hw->conf.radar_enabled) {
- u32 rxfilter;
-
- /* set HW specific DFS configuration */
- ath9k_hw_set_radar_params(ah);
- rxfilter = ath9k_hw_getrxfilter(ah);
- rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
- ATH9K_RX_FILTER_PHYERR;
- ath9k_hw_setrxfilter(ah, rxfilter);
- ath_dbg(common, DFS, "DFS enabled at freq %d\n",
- curchan->center_freq);
- } else {
- /* perform spectral scan if requested. */
- if (test_bit(SC_OP_SCANNING, &sc->sc_flags) &&
- sc->spectral_mode == SPECTRAL_CHANSCAN)
- ath9k_spectral_scan_trigger(hw);
- }
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 01/10] ath9k: use a separate data structure for rx buffers
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
There's no shared code for handling both rx and tx buffers, and tx
buffers require a lot more metadata than rx buffers.
Using a separate data structure for rx reduces memory usage and improves
cache footprint.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 10 +++-
drivers/net/wireless/ath/ath9k/init.c | 84 ++++++++++++++++++++++++----------
drivers/net/wireless/ath/ath9k/recv.c | 48 +++++++++----------
3 files changed, 92 insertions(+), 50 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8878f2d..83c0455 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -207,6 +207,14 @@ struct ath_frame_info {
u8 baw_tracked : 1;
};
+struct ath_rxbuf {
+ struct list_head list;
+ struct sk_buff *bf_mpdu;
+ void *bf_desc;
+ dma_addr_t bf_daddr;
+ dma_addr_t bf_buf_addr;
+};
+
struct ath_buf_state {
u8 bf_type;
u8 bfs_paprd;
@@ -307,7 +315,7 @@ struct ath_rx {
struct ath_descdma rxdma;
struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX];
- struct ath_buf *buf_hold;
+ struct ath_rxbuf *buf_hold;
struct sk_buff *frag;
u32 ampdu_ref;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index e3d11c4..2306f57 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -347,7 +347,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
u8 *ds;
- struct ath_buf *bf;
int i, bsize, desc_len;
ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n",
@@ -399,33 +398,68 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
/* allocate buffers */
- bsize = sizeof(struct ath_buf) * nbuf;
- bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL);
- if (!bf)
- return -ENOMEM;
+ if (is_tx) {
+ struct ath_buf *bf;
+
+ bsize = sizeof(struct ath_buf) * nbuf;
+ bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL);
+ if (!bf)
+ return -ENOMEM;
+
+ for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) {
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+
+ if (!(sc->sc_ah->caps.hw_caps &
+ ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ /*
+ * Skip descriptor addresses which can cause 4KB
+ * boundary crossing (addr + length) with a 32 dword
+ * descriptor fetch.
+ */
+ while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+ BUG_ON((caddr_t) bf->bf_desc >=
+ ((caddr_t) dd->dd_desc +
+ dd->dd_desc_len));
+
+ ds += (desc_len * ndesc);
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+ }
+ }
+ list_add_tail(&bf->list, head);
+ }
+ } else {
+ struct ath_rxbuf *bf;
+
+ bsize = sizeof(struct ath_rxbuf) * nbuf;
+ bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL);
+ if (!bf)
+ return -ENOMEM;
- for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) {
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
-
- if (!(sc->sc_ah->caps.hw_caps &
- ATH9K_HW_CAP_4KB_SPLITTRANS)) {
- /*
- * Skip descriptor addresses which can cause 4KB
- * boundary crossing (addr + length) with a 32 dword
- * descriptor fetch.
- */
- while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
- BUG_ON((caddr_t) bf->bf_desc >=
- ((caddr_t) dd->dd_desc +
- dd->dd_desc_len));
-
- ds += (desc_len * ndesc);
- bf->bf_desc = ds;
- bf->bf_daddr = DS2PHYS(dd, ds);
+ for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) {
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+
+ if (!(sc->sc_ah->caps.hw_caps &
+ ATH9K_HW_CAP_4KB_SPLITTRANS)) {
+ /*
+ * Skip descriptor addresses which can cause 4KB
+ * boundary crossing (addr + length) with a 32 dword
+ * descriptor fetch.
+ */
+ while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
+ BUG_ON((caddr_t) bf->bf_desc >=
+ ((caddr_t) dd->dd_desc +
+ dd->dd_desc_len));
+
+ ds += (desc_len * ndesc);
+ bf->bf_desc = ds;
+ bf->bf_daddr = DS2PHYS(dd, ds);
+ }
}
+ list_add_tail(&bf->list, head);
}
- list_add_tail(&bf->list, head);
}
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ab9e3a8..8b788ef 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -19,7 +19,7 @@
#include "ath9k.h"
#include "ar9003_mac.h"
-#define SKB_CB_ATHBUF(__skb) (*((struct ath_buf **)__skb->cb))
+#define SKB_CB_ATHBUF(__skb) (*((struct ath_rxbuf **)__skb->cb))
static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
{
@@ -35,7 +35,7 @@ static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
* buffer (or rx fifo). This can incorrectly acknowledge packets
* to a sender if last desc is self-linked.
*/
-static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
+static void ath_rx_buf_link(struct ath_softc *sc, struct ath_rxbuf *bf)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
@@ -68,7 +68,7 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
sc->rx.rxlink = &ds->ds_link;
}
-static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_buf *bf)
+static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_rxbuf *bf)
{
if (sc->rx.buf_hold)
ath_rx_buf_link(sc, sc->rx.buf_hold);
@@ -112,13 +112,13 @@ static bool ath_rx_edma_buf_link(struct ath_softc *sc,
struct ath_hw *ah = sc->sc_ah;
struct ath_rx_edma *rx_edma;
struct sk_buff *skb;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
rx_edma = &sc->rx.rx_edma[qtype];
if (skb_queue_len(&rx_edma->rx_fifo) >= rx_edma->rx_fifo_hwsize)
return false;
- bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
+ bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list);
list_del_init(&bf->list);
skb = bf->bf_mpdu;
@@ -138,7 +138,7 @@ static void ath_rx_addbuffer_edma(struct ath_softc *sc,
enum ath9k_rx_qtype qtype)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
- struct ath_buf *bf, *tbf;
+ struct ath_rxbuf *bf, *tbf;
if (list_empty(&sc->rx.rxbuf)) {
ath_dbg(common, QUEUE, "No free rx buf available\n");
@@ -154,7 +154,7 @@ static void ath_rx_addbuffer_edma(struct ath_softc *sc,
static void ath_rx_remove_buffer(struct ath_softc *sc,
enum ath9k_rx_qtype qtype)
{
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
struct ath_rx_edma *rx_edma;
struct sk_buff *skb;
@@ -171,7 +171,7 @@ static void ath_rx_edma_cleanup(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
@@ -199,7 +199,7 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs)
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_hw *ah = sc->sc_ah;
struct sk_buff *skb;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
int error = 0, i;
u32 size;
@@ -211,7 +211,7 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs)
ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_HP],
ah->caps.rx_hp_qdepth);
- size = sizeof(struct ath_buf) * nbufs;
+ size = sizeof(struct ath_rxbuf) * nbufs;
bf = devm_kzalloc(sc->dev, size, GFP_KERNEL);
if (!bf)
return -ENOMEM;
@@ -271,7 +271,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct sk_buff *skb;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
int error = 0;
spin_lock_init(&sc->sc_pcu_lock);
@@ -332,7 +332,7 @@ void ath_rx_cleanup(struct ath_softc *sc)
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct sk_buff *skb;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
ath_rx_edma_cleanup(sc);
@@ -427,7 +427,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
int ath_startrecv(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
- struct ath_buf *bf, *tbf;
+ struct ath_rxbuf *bf, *tbf;
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
ath_edma_start_recv(sc);
@@ -447,7 +447,7 @@ int ath_startrecv(struct ath_softc *sc)
if (list_empty(&sc->rx.rxbuf))
goto start_recv;
- bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
+ bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list);
ath9k_hw_putrxbuf(ah, bf->bf_daddr);
ath9k_hw_rxena(ah);
@@ -603,13 +603,13 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb, bool mybeacon)
static bool ath_edma_get_buffers(struct ath_softc *sc,
enum ath9k_rx_qtype qtype,
struct ath_rx_status *rs,
- struct ath_buf **dest)
+ struct ath_rxbuf **dest)
{
struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype];
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct sk_buff *skb;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
int ret;
skb = skb_peek(&rx_edma->rx_fifo);
@@ -653,11 +653,11 @@ static bool ath_edma_get_buffers(struct ath_softc *sc,
return true;
}
-static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc,
+static struct ath_rxbuf *ath_edma_get_next_rx_buf(struct ath_softc *sc,
struct ath_rx_status *rs,
enum ath9k_rx_qtype qtype)
{
- struct ath_buf *bf = NULL;
+ struct ath_rxbuf *bf = NULL;
while (ath_edma_get_buffers(sc, qtype, rs, &bf)) {
if (!bf)
@@ -668,13 +668,13 @@ static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc,
return NULL;
}
-static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
+static struct ath_rxbuf *ath_get_next_rx_buf(struct ath_softc *sc,
struct ath_rx_status *rs)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
int ret;
if (list_empty(&sc->rx.rxbuf)) {
@@ -682,7 +682,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
return NULL;
}
- bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
+ bf = list_first_entry(&sc->rx.rxbuf, struct ath_rxbuf, list);
if (bf == sc->rx.buf_hold)
return NULL;
@@ -702,7 +702,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
ret = ath9k_hw_rxprocdesc(ah, ds, rs);
if (ret == -EINPROGRESS) {
struct ath_rx_status trs;
- struct ath_buf *tbf;
+ struct ath_rxbuf *tbf;
struct ath_desc *tds;
memset(&trs, 0, sizeof(trs));
@@ -711,7 +711,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
return NULL;
}
- tbf = list_entry(bf->list.next, struct ath_buf, list);
+ tbf = list_entry(bf->list.next, struct ath_rxbuf, list);
/*
* On some hardware the descriptor status words could
@@ -1308,7 +1308,7 @@ static void ath9k_apply_ampdu_details(struct ath_softc *sc,
int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
{
- struct ath_buf *bf;
+ struct ath_rxbuf *bf;
struct sk_buff *skb = NULL, *requeue_skb, *hdr_skb;
struct ieee80211_rx_status *rxs;
struct ath_hw *ah = sc->sc_ah;
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 03/10] ath9k_hw: remove IS_CHAN_B()
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Hardware 802.11b-only mode isn't supported by the driver (the device is
configured for 802.11n/g instead). Simplify the code by removing checks
for it.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 6 ++++--
drivers/net/wireless/ath/ath9k/ar9002_calib.c | 7 ++-----
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 6 ++++--
drivers/net/wireless/ath/ath9k/hw.c | 9 ++-------
drivers/net/wireless/ath/ath9k/hw.h | 1 -
drivers/net/wireless/ath/ath9k/mac.c | 6 +-----
6 files changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 2bfa6fb..b197bf2 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -794,8 +794,10 @@ static void ar5008_hw_set_rfmode(struct ath_hw *ah, struct ath9k_channel *chan)
if (chan == NULL)
return;
- rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
- ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+ if (IS_CHAN_2GHZ(chan))
+ rfMode |= AR_PHY_MODE_DYNAMIC;
+ else
+ rfMode |= AR_PHY_MODE_OFDM;
if (!AR_SREV_9280_20_OR_LATER(ah))
rfMode |= (IS_CHAN_5GHZ(chan)) ?
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 32376ad..cdc7400 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -33,15 +33,12 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah,
bool supported = false;
switch (ah->supp_cals & cal_type) {
case IQ_MISMATCH_CAL:
- /* Run IQ Mismatch for non-CCK only */
- if (!IS_CHAN_B(chan))
- supported = true;
+ supported = true;
break;
case ADC_GAIN_CAL:
case ADC_DC_CAL:
/* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
- if (!IS_CHAN_B(chan) &&
- !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
+ if (!((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
IS_CHAN_HT20(chan)))
supported = true;
break;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 7249844..312c868 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -808,8 +808,10 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah,
if (chan == NULL)
return;
- rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
- ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+ if (IS_CHAN_2GHZ(chan))
+ rfMode |= AR_PHY_MODE_DYNAMIC;
+ else
+ rfMode |= AR_PHY_MODE_OFDM;
if (IS_CHAN_A_FAST_CLOCK(ah, chan))
rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 7c4d600..34c8e2e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -190,10 +190,7 @@ EXPORT_SYMBOL(ath9k_hw_wait);
void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
int hw_delay)
{
- if (IS_CHAN_B(chan))
- hw_delay = (4 * hw_delay) / 22;
- else
- hw_delay /= 10;
+ hw_delay /= 10;
if (IS_CHAN_HALF_RATE(chan))
hw_delay *= 2;
@@ -1159,9 +1156,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
{
u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band);
- if (IS_CHAN_B(chan))
- ctl |= CTL_11B;
- else if (IS_CHAN_G(chan))
+ if (IS_CHAN_G(chan))
ctl |= CTL_11G;
else
ctl |= CTL_11A;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 102b3b6..eaaf98b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -455,7 +455,6 @@ struct ath9k_channel {
((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
/* These macros check chanmode and not channelFlags */
-#define IS_CHAN_B(_c) ((_c)->chanmode == CHANNEL_B)
#define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) || \
((_c)->chanmode == CHANNEL_G_HT20))
#define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) || \
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index a3eff09..6a18f9d 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -374,7 +374,6 @@ EXPORT_SYMBOL(ath9k_hw_releasetxqueue);
bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
{
struct ath_common *common = ath9k_hw_common(ah);
- struct ath9k_channel *chan = ah->curchan;
struct ath9k_tx_queue_info *qi;
u32 cwMin, chanCwMin, value;
@@ -387,10 +386,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
ath_dbg(common, QUEUE, "Reset TX queue: %u\n", q);
if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
- if (chan && IS_CHAN_B(chan))
- chanCwMin = INIT_CWMIN_11B;
- else
- chanCwMin = INIT_CWMIN;
+ chanCwMin = INIT_CWMIN;
for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1);
} else
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 08/10] ath9k: remove sc->config.cabqReadyTime
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
It is not exposed as a configuration option anyway
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
drivers/net/wireless/ath/ath9k/init.c | 1 -
drivers/net/wireless/ath/ath9k/mac.h | 2 --
drivers/net/wireless/ath/ath9k/xmit.c | 9 +--------
4 files changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 83c0455..d03b85e 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -64,7 +64,6 @@ struct ath_node;
struct ath_config {
u16 txpowlimit;
- u8 cabqReadytime;
};
/*************************/
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 9c145fa..7df728f 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -471,7 +471,6 @@ static int ath9k_init_queues(struct ath_softc *sc)
sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah);
sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
- sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
ath_cabq_update(sc);
sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index bfccace..e3eed81 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -603,8 +603,6 @@ enum ath9k_tx_queue_flags {
#define ATH9K_TXQ_USE_LOCKOUT_BKOFF_DIS 0x00000001
#define ATH9K_DECOMP_MASK_SIZE 128
-#define ATH9K_READY_TIME_LO_BOUND 50
-#define ATH9K_READY_TIME_HI_BOUND 96
enum ath9k_pkt_type {
ATH9K_PKT_TYPE_NORMAL = 0,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 08ba590..47696d2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1704,16 +1704,9 @@ int ath_cabq_update(struct ath_softc *sc)
int qnum = sc->beacon.cabq->axq_qnum;
ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
- /*
- * Ensure the readytime % is within the bounds.
- */
- if (sc->config.cabqReadytime < ATH9K_READY_TIME_LO_BOUND)
- sc->config.cabqReadytime = ATH9K_READY_TIME_LO_BOUND;
- else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
- sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
qi.tqi_readyTime = (cur_conf->beacon_interval *
- sc->config.cabqReadytime) / 100;
+ ATH_CABQ_READY_TIME) / 100;
ath_txq_update(sc, qnum, &qi);
return 0;
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 10/10] ath9k_hw: remove references to hw->conf
From: Felix Fietkau @ 2013-10-11 21:31 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Accessing it to get the current operating channel is racy and in the way
of further channel handling related changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/calib.c | 8 +++-----
drivers/net/wireless/ath/ath9k/hw.c | 21 +++++++++------------
drivers/net/wireless/ath/ath9k/hw.h | 2 +-
5 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index b197bf2..ff415e8 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -672,7 +672,7 @@ static void ar5008_hw_set_channel_regs(struct ath_hw *ah,
}
REG_WRITE(ah, AR_PHY_TURBO, phymode);
- ath9k_hw_set11nmac2040(ah);
+ ath9k_hw_set11nmac2040(ah, chan);
ENABLE_REGWRITE_BUFFER(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 312c868..f3adafd 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -564,7 +564,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
REG_WRITE(ah, AR_PHY_GEN_CTRL, phymode);
/* Configure MAC for 20/40 operation */
- ath9k_hw_set11nmac2040(ah);
+ ath9k_hw_set11nmac2040(ah, chan);
/* global transmit timeout (25 TUs default)*/
REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index fe23026..d8db74b 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -186,7 +186,6 @@ void ath9k_hw_reset_calibration(struct ath_hw *ah,
bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &common->hw->conf;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
if (!ah->caldata)
@@ -208,7 +207,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
return true;
ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n",
- currCal->calData->calType, conf->chandef.chan->center_freq);
+ currCal->calData->calType, ah->curchan->chan->center_freq);
ah->caldata->CalValid &= ~currCal->calData->calType;
currCal->calState = CAL_WAITING;
@@ -242,7 +241,6 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
int32_t val;
u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &common->hw->conf;
s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
if (ah->caldata)
@@ -252,7 +250,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
if (chainmask & (1 << i)) {
s16 nfval;
- if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+ if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
continue;
if (h)
@@ -314,7 +312,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
ENABLE_REGWRITE_BUFFER(ah);
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
- if ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))
+ if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan))
continue;
val = REG_READ(ah, ah->nf_regs[i]);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index bc7382f..dcdbab4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -130,29 +130,29 @@ void ath9k_debug_sync_cause(struct ath_common *common, u32 sync_cause)
static void ath9k_hw_set_clockrate(struct ath_hw *ah)
{
- struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_channel *chan = ah->curchan;
unsigned int clockrate;
/* AR9287 v1.3+ uses async FIFO and runs the MAC at 117 MHz */
if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah))
clockrate = 117;
- else if (!ah->curchan) /* should really check for CCK instead */
+ else if (!chan) /* should really check for CCK instead */
clockrate = ATH9K_CLOCK_RATE_CCK;
- else if (conf->chandef.chan->band == IEEE80211_BAND_2GHZ)
+ else if (IS_CHAN_2GHZ(chan))
clockrate = ATH9K_CLOCK_RATE_2GHZ_OFDM;
else if (ah->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)
clockrate = ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM;
else
clockrate = ATH9K_CLOCK_RATE_5GHZ_OFDM;
- if (conf_is_ht40(conf))
+ if (IS_CHAN_HT40(chan))
clockrate *= 2;
if (ah->curchan) {
- if (IS_CHAN_HALF_RATE(ah->curchan))
+ if (IS_CHAN_HALF_RATE(chan))
clockrate /= 2;
- if (IS_CHAN_QUARTER_RATE(ah->curchan))
+ if (IS_CHAN_QUARTER_RATE(chan))
clockrate /= 4;
}
@@ -1038,7 +1038,6 @@ static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
void ath9k_hw_init_global_settings(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_conf *conf = &common->hw->conf;
const struct ath9k_channel *chan = ah->curchan;
int acktimeout, ctstimeout, ack_offset = 0;
int slottime;
@@ -1113,8 +1112,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
- if (conf->chandef.chan &&
- conf->chandef.chan->band == IEEE80211_BAND_2GHZ &&
+ if (IS_CHAN_2GHZ(chan) &&
!IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) {
acktimeout += 64 - sifstime - ah->slottime;
ctstimeout += 48 - sifstime - ah->slottime;
@@ -2946,12 +2944,11 @@ void ath9k_hw_set_tsfadjust(struct ath_hw *ah, bool set)
}
EXPORT_SYMBOL(ath9k_hw_set_tsfadjust);
-void ath9k_hw_set11nmac2040(struct ath_hw *ah)
+void ath9k_hw_set11nmac2040(struct ath_hw *ah, struct ath9k_channel *chan)
{
- struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
u32 macmode;
- if (conf_is_ht40(conf) && !ah->config.cwm_ignore_extcca)
+ if (IS_CHAN_HT40(chan) && !ah->config.cwm_ignore_extcca)
macmode = AR_2040_JOINED_RX_CLEAR;
else
macmode = 0;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 9d04d67..81fcbc7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1003,7 +1003,7 @@ void ath9k_hw_reset_tsf(struct ath_hw *ah);
void ath9k_hw_set_tsfadjust(struct ath_hw *ah, bool set);
void ath9k_hw_init_global_settings(struct ath_hw *ah);
u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah);
-void ath9k_hw_set11nmac2040(struct ath_hw *ah);
+void ath9k_hw_set11nmac2040(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
const struct ath9k_beacon_state *bs);
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 06/10] ath9k: make ath9k_cmn_update_ichannel static
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Rework its wrapper function to make it more generic, using it as a
replacement for previous calls to ath9k_cmn_update_ichannel.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/common.c | 16 ++++++++--------
drivers/net/wireless/ath/ath9k/common.h | 7 +++----
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 6 ++----
drivers/net/wireless/ath/ath9k/init.c | 2 +-
drivers/net/wireless/ath/ath9k/main.c | 7 +++----
5 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index b5ac269..a7e5a05 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -52,8 +52,8 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype);
/*
* Update internal channel flags.
*/
-void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct cfg80211_chan_def *chandef)
+static void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
+ struct cfg80211_chan_def *chandef)
{
struct ieee80211_channel *chan = chandef->chan;
u16 flags = 0;
@@ -88,25 +88,25 @@ void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
ichan->channelFlags = flags;
}
-EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
/*
* Get the internal channel reference.
*/
-struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
- struct ath_hw *ah)
+struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw,
+ struct ath_hw *ah,
+ struct cfg80211_chan_def *chandef)
{
- struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+ struct ieee80211_channel *curchan = chandef->chan;
struct ath9k_channel *channel;
u8 chan_idx;
chan_idx = curchan->hw_value;
channel = &ah->channels[chan_idx];
- ath9k_cmn_update_ichannel(channel, &hw->conf.chandef);
+ ath9k_cmn_update_ichannel(channel, chandef);
return channel;
}
-EXPORT_SYMBOL(ath9k_cmn_get_curchannel);
+EXPORT_SYMBOL(ath9k_cmn_get_channel);
int ath9k_cmn_count_streams(unsigned int chainmask, int max)
{
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index e039bcb..eb85e1b 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -43,10 +43,9 @@
(((x) + ((mul)/2)) / (mul))
int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
-void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
- struct cfg80211_chan_def *chandef);
-struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
- struct ath_hw *ah);
+struct ath9k_channel *ath9k_cmn_get_channel(struct ieee80211_hw *hw,
+ struct ath_hw *ah,
+ struct cfg80211_chan_def *chandef);
int ath9k_cmn_count_streams(unsigned int chainmask, int max);
void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common,
enum ath_stomp_type stomp_type);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index fa71af1..9a2657f 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -906,7 +906,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
WMI_CMD(WMI_FLUSH_RECV_CMDID);
/* setup initial channel */
- init_channel = ath9k_cmn_get_curchannel(hw, ah);
+ init_channel = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef);
ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (ret) {
@@ -1188,9 +1188,7 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
ath_dbg(common, CONFIG, "Set channel: %d MHz\n",
curchan->center_freq);
- ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
- &hw->conf.chandef);
-
+ ath9k_cmn_get_channel(hw, priv->ah, &hw->conf.chandef);
if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 2306f57..9c145fa 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -802,7 +802,7 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
chan = &sband->channels[i];
ah->curchan = &ah->channels[chan->hw_value];
cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20);
- ath9k_cmn_update_ichannel(ah->curchan, &chandef);
+ ath9k_cmn_get_channel(sc->hw, ah, &chandef);
ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 433caf4..2a86047 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -600,7 +600,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
- init_channel = ath9k_cmn_get_curchannel(hw, ah);
+ init_channel = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(ah, false);
@@ -803,7 +803,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
}
if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+ ah->curchan = ath9k_cmn_get_channel(hw, ah, &hw->conf.chandef);
ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
ath9k_hw_phy_disable(ah);
@@ -1223,8 +1223,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
ath_update_survey_stats(sc);
spin_unlock_irqrestore(&common->cc_lock, flags);
- ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
- &conf->chandef);
+ ath9k_cmn_get_channel(hw, ah, &conf->chandef);
/*
* If the operating channel changes, change the survey in-use flags
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 05/10] ath9k_hw: simplify channel flags
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
There was some duplication between channelFlags and chanmode, as well as
a lot of redundant checks based on the combinations of flags.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/calib.c | 1 -
drivers/net/wireless/ath/ath9k/common.c | 75 ++++++++-----------------------
drivers/net/wireless/ath/ath9k/hw.c | 24 +++-------
drivers/net/wireless/ath/ath9k/hw.h | 80 +++++++++++----------------------
4 files changed, 50 insertions(+), 130 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index d438a03..fe23026 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -408,7 +408,6 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
ah->caldata->channel = chan->channel;
ah->caldata->channelFlags = chan->channelFlags;
- ah->caldata->chanmode = chan->chanmode;
h = ah->caldata->nfCalHist;
default_nf = ath9k_hw_get_default_nf(ah, chan);
for (i = 0; i < NUM_NF_READINGS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index d3063c2..b5ac269 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -49,83 +49,44 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
}
EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_keytype);
-static u32 ath9k_get_extchanmode(struct cfg80211_chan_def *chandef)
-{
- u32 chanmode = 0;
-
- switch (chandef->chan->band) {
- case IEEE80211_BAND_2GHZ:
- switch (chandef->width) {
- case NL80211_CHAN_WIDTH_20_NOHT:
- case NL80211_CHAN_WIDTH_20:
- chanmode = CHANNEL_G_HT20;
- break;
- case NL80211_CHAN_WIDTH_40:
- if (chandef->center_freq1 > chandef->chan->center_freq)
- chanmode = CHANNEL_G_HT40PLUS;
- else
- chanmode = CHANNEL_G_HT40MINUS;
- break;
- default:
- break;
- }
- break;
- case IEEE80211_BAND_5GHZ:
- switch (chandef->width) {
- case NL80211_CHAN_WIDTH_20_NOHT:
- case NL80211_CHAN_WIDTH_20:
- chanmode = CHANNEL_A_HT20;
- break;
- case NL80211_CHAN_WIDTH_40:
- if (chandef->center_freq1 > chandef->chan->center_freq)
- chanmode = CHANNEL_A_HT40PLUS;
- else
- chanmode = CHANNEL_A_HT40MINUS;
- break;
- default:
- break;
- }
- break;
- default:
- break;
- }
-
- return chanmode;
-}
-
/*
* Update internal channel flags.
*/
void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
struct cfg80211_chan_def *chandef)
{
- ichan->channel = chandef->chan->center_freq;
- ichan->chan = chandef->chan;
-
- if (chandef->chan->band == IEEE80211_BAND_2GHZ) {
- ichan->chanmode = CHANNEL_G;
- ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM;
- } else {
- ichan->chanmode = CHANNEL_A;
- ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
- }
+ struct ieee80211_channel *chan = chandef->chan;
+ u16 flags = 0;
+
+ ichan->channel = chan->center_freq;
+ ichan->chan = chan;
+
+ if (chan->band == IEEE80211_BAND_5GHZ)
+ flags |= CHANNEL_5GHZ;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_5:
- ichan->channelFlags |= CHANNEL_QUARTER;
+ flags |= CHANNEL_QUARTER;
break;
case NL80211_CHAN_WIDTH_10:
- ichan->channelFlags |= CHANNEL_HALF;
+ flags |= CHANNEL_HALF;
break;
case NL80211_CHAN_WIDTH_20_NOHT:
break;
case NL80211_CHAN_WIDTH_20:
+ flags |= CHANNEL_HT;
+ break;
case NL80211_CHAN_WIDTH_40:
- ichan->chanmode = ath9k_get_extchanmode(chandef);
+ if (chandef->center_freq1 > chandef->chan->center_freq)
+ flags |= CHANNEL_HT40PLUS | CHANNEL_HT;
+ else
+ flags |= CHANNEL_HT40MINUS | CHANNEL_HT;
break;
default:
WARN_ON(1);
}
+
+ ichan->channelFlags = flags;
}
EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 40a1132..bc7382f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1156,7 +1156,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
{
u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band);
- if (IS_CHAN_G(chan))
+ if (IS_CHAN_2GHZ(chan))
ctl |= CTL_11G;
else
ctl |= CTL_11A;
@@ -1505,7 +1505,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
if (pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) {
band_switch = IS_CHAN_5GHZ(ah->curchan) != IS_CHAN_5GHZ(chan);
- mode_diff = (chan->chanmode != ah->curchan->chanmode);
+ mode_diff = (chan->channelFlags != ah->curchan->channelFlags);
}
for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
@@ -1814,20 +1814,11 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan)
goto fail;
/*
- * If cross-band fcc is not supoprted, bail out if
- * either channelFlags or chanmode differ.
- *
- * chanmode will be different if the HT operating mode
- * changes because of CSA.
+ * If cross-band fcc is not supoprted, bail out if channelFlags differ.
*/
- if (!(pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH)) {
- if ((chan->channelFlags & CHANNEL_ALL) !=
- (ah->curchan->channelFlags & CHANNEL_ALL))
- goto fail;
-
- if (chan->chanmode != ah->curchan->chanmode)
- goto fail;
- }
+ if (!(pCap->hw_caps & ATH9K_HW_CAP_FCC_BAND_SWITCH) &&
+ chan->channelFlags != ah->curchan->channelFlags)
+ goto fail;
if (!ath9k_hw_check_alive(ah))
goto fail;
@@ -1889,8 +1880,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ah->caldata = caldata;
if (caldata && (chan->channel != caldata->channel ||
- chan->channelFlags != caldata->channelFlags ||
- chan->chanmode != caldata->chanmode)) {
+ chan->channelFlags != caldata->channelFlags)) {
/* Operating channel changed, reset channel calibration data */
memset(caldata, 0, sizeof(*caldata));
ath9k_init_nfcal_hist_buffer(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 0e44693..9d04d67 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -369,36 +369,6 @@ enum ath9k_int {
ATH9K_INT_NOCARD = 0xffffffff
};
-#define CHANNEL_CCK 0x00020
-#define CHANNEL_OFDM 0x00040
-#define CHANNEL_2GHZ 0x00080
-#define CHANNEL_5GHZ 0x00100
-#define CHANNEL_PASSIVE 0x00200
-#define CHANNEL_DYN 0x00400
-#define CHANNEL_HALF 0x04000
-#define CHANNEL_QUARTER 0x08000
-#define CHANNEL_HT20 0x10000
-#define CHANNEL_HT40PLUS 0x20000
-#define CHANNEL_HT40MINUS 0x40000
-
-#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
-#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
-#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
-#define CHANNEL_G_HT20 (CHANNEL_2GHZ|CHANNEL_HT20)
-#define CHANNEL_A_HT20 (CHANNEL_5GHZ|CHANNEL_HT20)
-#define CHANNEL_G_HT40PLUS (CHANNEL_2GHZ|CHANNEL_HT40PLUS)
-#define CHANNEL_G_HT40MINUS (CHANNEL_2GHZ|CHANNEL_HT40MINUS)
-#define CHANNEL_A_HT40PLUS (CHANNEL_5GHZ|CHANNEL_HT40PLUS)
-#define CHANNEL_A_HT40MINUS (CHANNEL_5GHZ|CHANNEL_HT40MINUS)
-#define CHANNEL_ALL \
- (CHANNEL_OFDM| \
- CHANNEL_CCK| \
- CHANNEL_2GHZ | \
- CHANNEL_5GHZ | \
- CHANNEL_HT20 | \
- CHANNEL_HT40PLUS | \
- CHANNEL_HT40MINUS)
-
#define MAX_RTT_TABLE_ENTRY 6
#define MAX_IQCAL_MEASUREMENT 8
#define MAX_CL_TAB_ENTRY 16
@@ -417,8 +387,7 @@ enum ath9k_cal_flags {
struct ath9k_hw_cal_data {
u16 channel;
- u32 channelFlags;
- u32 chanmode;
+ u16 channelFlags;
unsigned long cal_flags;
int32_t CalValid;
int8_t iCoff;
@@ -436,33 +405,34 @@ struct ath9k_hw_cal_data {
struct ath9k_channel {
struct ieee80211_channel *chan;
u16 channel;
- u32 channelFlags;
- u32 chanmode;
+ u16 channelFlags;
s16 noisefloor;
};
-#define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
- (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
- (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
- (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS))
-#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
-#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
-#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
-#define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0)
+#define CHANNEL_5GHZ BIT(0)
+#define CHANNEL_HALF BIT(1)
+#define CHANNEL_QUARTER BIT(2)
+#define CHANNEL_HT BIT(3)
+#define CHANNEL_HT40PLUS BIT(4)
+#define CHANNEL_HT40MINUS BIT(5)
+
+#define IS_CHAN_5GHZ(_c) (!!((_c)->channelFlags & CHANNEL_5GHZ))
+#define IS_CHAN_2GHZ(_c) (!IS_CHAN_5GHZ(_c))
+
+#define IS_CHAN_HALF_RATE(_c) (!!((_c)->channelFlags & CHANNEL_HALF))
+#define IS_CHAN_QUARTER_RATE(_c) (!!((_c)->channelFlags & CHANNEL_QUARTER))
#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \
- ((((_c)->channelFlags & CHANNEL_5GHZ) != 0) && \
- ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
-
-/* These macros check chanmode and not channelFlags */
-#define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) || \
- ((_c)->chanmode == CHANNEL_G_HT20))
-#define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) || \
- ((_c)->chanmode == CHANNEL_A_HT40MINUS) || \
- ((_c)->chanmode == CHANNEL_G_HT40PLUS) || \
- ((_c)->chanmode == CHANNEL_G_HT40MINUS))
-#define IS_CHAN_HT(_c) (IS_CHAN_HT20((_c)) || IS_CHAN_HT40((_c)))
-#define IS_CHAN_HT40PLUS(_c) ((_c)->chanmode & CHANNEL_HT40PLUS)
-#define IS_CHAN_HT40MINUS(_c) ((_c)->chanmode & CHANNEL_HT40MINUS)
+ (IS_CHAN_5GHZ(_c) && ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
+
+#define IS_CHAN_HT(_c) ((_c)->channelFlags & CHANNEL_HT)
+
+#define IS_CHAN_HT20(_c) (IS_CHAN_HT(_c) && !IS_CHAN_HT40(_c))
+
+#define IS_CHAN_HT40(_c) \
+ (!!((_c)->channelFlags & (CHANNEL_HT40PLUS | CHANNEL_HT40MINUS)))
+
+#define IS_CHAN_HT40PLUS(_c) ((_c)->channelFlags & CHANNEL_HT40PLUS)
+#define IS_CHAN_HT40MINUS(_c) ((_c)->channelFlags & CHANNEL_HT40MINUS)
enum ath9k_power_mode {
ATH9K_PM_AWAKE = 0,
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 04/10] ath9k_hw: remove IS_CHAN_OFDM()
From: Felix Fietkau @ 2013-10-11 21:30 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
The hardware is always configured with OFDM support enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++------
drivers/net/wireless/ath/ath9k/hw.h | 1 -
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 34c8e2e..40a1132 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1544,9 +1544,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
ath9k_hw_set_clockrate(ah);
ath9k_hw_apply_txpower(ah, chan, false);
- if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
- ath9k_hw_set_delta_slope(ah, chan);
-
+ ath9k_hw_set_delta_slope(ah, chan);
ath9k_hw_spur_mitigate_freq(ah, chan);
if (band_switch || ini_reloaded)
@@ -1981,9 +1979,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_init_mfp(ah);
- if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
- ath9k_hw_set_delta_slope(ah, chan);
-
+ ath9k_hw_set_delta_slope(ah, chan);
ath9k_hw_spur_mitigate_freq(ah, chan);
ah->eep_ops->set_board_values(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index eaaf98b..0e44693 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -445,7 +445,6 @@ struct ath9k_channel {
(((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
(((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
(((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS))
-#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
--
1.8.0.2
^ permalink raw reply related
* [PATCH v2 09/10] ath9k: make ath9k_uses_beacons static
From: Felix Fietkau @ 2013-10-11 21:31 UTC (permalink / raw)
To: linux-wireless; +Cc: linville
In-Reply-To: <1381527061-43758-1-git-send-email-nbd@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
drivers/net/wireless/ath/ath9k/main.c | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index d03b85e..5492a0c 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -933,7 +933,6 @@ void ath9k_deinit_device(struct ath_softc *sc);
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath9k_reload_chainmask_settings(struct ath_softc *sc);
-bool ath9k_uses_beacons(int type);
void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw);
int ath9k_spectral_scan_config(struct ieee80211_hw *hw,
enum spectral_mode spectral_mode);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index bc89823..20a2fbc 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -896,7 +896,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
ath_dbg(common, CONFIG, "Driver halt\n");
}
-bool ath9k_uses_beacons(int type)
+static bool ath9k_uses_beacons(int type)
{
switch (type) {
case NL80211_IFTYPE_AP:
--
1.8.0.2
^ permalink raw reply related
* Re: [PATCH] mac80211: Add rate-control name to station debugfs.
From: Felix Fietkau @ 2013-10-11 21:29 UTC (permalink / raw)
To: greearb; +Cc: linux-wireless
In-Reply-To: <1381525471-23655-1-git-send-email-greearb@candelatech.com>
On 2013-10-11 11:04 PM, greearb@candelatech.com wrote:
> From: Ben Greear <greearb@candelatech.com>
>
> Nice to see what algorithm it's actually using.
No need for that, you can use this:
# cat /sys/kernel/debug/ieee80211/phy0/rc/name
- Felix
^ permalink raw reply
* [PATCH] mac80211: Add rate-control name to station debugfs.
From: greearb @ 2013-10-11 21:04 UTC (permalink / raw)
To: linux-wireless; +Cc: Ben Greear
From: Ben Greear <greearb@candelatech.com>
Nice to see what algorithm it's actually using.
Signed-off-by: Ben Greear <greearb@candelatech.com>
---
net/mac80211/debugfs_sta.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 19c54a4..472f544 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -15,6 +15,7 @@
#include "debugfs_sta.h"
#include "sta_info.h"
#include "driver-ops.h"
+#include "rate.h"
/* sta attributtes */
@@ -371,6 +372,21 @@ static ssize_t sta_current_tx_rate_read(struct file *file, char __user *userbuf,
}
STA_OPS(current_tx_rate);
+static ssize_t sta_rc_name_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct sta_info *sta = file->private_data;
+ struct rate_control_ref *ref = sta->rate_ctrl;
+ if (ref && ref->ops && ref->ops->name)
+ return mac80211_format_buffer(userbuf, count, ppos,
+ "%s\n",
+ ref->ops->name);
+ else
+ return mac80211_format_buffer(userbuf, count, ppos,
+ "Unknown\n");
+}
+STA_OPS(rc_name);
+
static ssize_t sta_last_rx_rate_read(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
@@ -441,6 +457,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta)
DEBUGFS_ADD(last_ack_signal);
DEBUGFS_ADD(current_tx_rate);
DEBUGFS_ADD(last_rx_rate);
+ DEBUGFS_ADD(rc_name);
DEBUGFS_ADD_COUNTER(rx_packets, rx_packets);
DEBUGFS_ADD_COUNTER(tx_packets, tx_packets);
--
1.7.3.4
^ permalink raw reply related
* Re: [ANN] wireless-regdb: master-2013-10-11
From: John W. Linville @ 2013-10-11 20:39 UTC (permalink / raw)
To: linux-wireless; +Cc: wireless-regdb
In-Reply-To: <20131011202459.GF14329@tuxdriver.com>
On Fri, Oct 11, 2013 at 04:24:59PM -0400, John W. Linville wrote:
> (Cutting the short log, since the original version got classified as
> SPAM on vger.kernel.org...??)
>
> A new release of wireless-regdb (master-2013-10-11) is available at:
>
> http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2013.10.11.tar.gz
>
> Here is the short log of the changes included since the 2013-02-13
> release:
>
> SNIP -- you'll have to check it yourself:
>
> git log master-2013-02-13..master-2013-10-11 | git shortlog
FYI -- I've purged my folders of all other old/pending wireless-regdb
stuff. If you have a change that you still want to propose to the
regulatory database, please send it as a _patch_ at your leisure.
Thanks,
John
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply
* Re: [wireless-next:master 82/98] drivers/net/wireless/ath/wcn36xx/smd.c:1330:2-8: preceding lock on line 1324
From: Eugene Krasnikov @ 2013-10-11 20:44 UTC (permalink / raw)
To: Fengguang Wu; +Cc: kbuild-all, John W. Linville, linux-wireless, wcn36xx
In-Reply-To: <20131011153026.GA13099@localhost>
Good patch, thanx!
On Fri, Oct 11, 2013 at 4:30 PM, Fengguang Wu <fengguang.wu@intel.com> wrote:
>
> Hi Eugene,
>
> FYI, there are coccinelle warnings in
>
> tree: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master
> head: e25aa82a89db9e3b09d02b5481aa375c7712a10d
> commit: 8e84c25821698bdef73c0329fb2022a4673b7adc [82/98] wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware
>
>>> drivers/net/wireless/ath/wcn36xx/smd.c:1330:2-8: preceding lock on line 1324
> --
>>> drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 106
>>> drivers/net/wireless/ath/wcn36xx/debug.c:27:11-31: WARNING opportunity for simple_open, see also structure on line 148
>
> Please consider folding the attached diff :-)
>
> ---
> 0-DAY kernel build testing backend Open Source Technology Center
> http://lists.01.org/mailman/listinfo/kbuild Intel Corporation
--
Best regards,
Eugene
^ permalink raw reply
* Re: [wireless-next:master 82/98] drivers/net/wireless/ath/wcn36xx/wcn36xx.h:88:24: sparse: incorrect type in assignment (different base types)
From: Eugene Krasnikov @ 2013-10-11 20:39 UTC (permalink / raw)
To: Johannes Berg
Cc: Fengguang Wu, kbuild-all, John W. Linville, linux-wireless,
wcn36xx
In-Reply-To: <1381476265.14293.0.camel@jlt4.sipsolutions.net>
Hi Johannes,
Do you see the same warning? With the latest sparse i do not see this
warning. I assume this warning depends on sparse version since with my
environment it does not pop up. Also from code perspective it looks
fine. Any ideas?:)
On Fri, Oct 11, 2013 at 8:24 AM, Johannes Berg
<johannes@sipsolutions.net> wrote:
> On Fri, 2013-10-11 at 08:19 +0100, Eugene Krasnikov wrote:
>> Hm.. weird. I was sure that i fixed all sparse warnings before
>> contribution. My sparse does not show this warning. Let me try to
>> reproduce this error and come back to you. Thanx for you feedback.
>
>> > reproduce: make C=1 CF=-D__CHECK_ENDIAN__
>
>
>
--
Best regards,
Eugene
^ permalink raw reply
* [ANN] wireless-regdb: master-2013-10-11
From: John W. Linville @ 2013-10-11 20:24 UTC (permalink / raw)
To: linux-wireless; +Cc: wireless-regdb
(Cutting the short log, since the original version got classified as
SPAM on vger.kernel.org...??)
A new release of wireless-regdb (master-2013-10-11) is available at:
http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2013.10.11.tar.gz
Here is the short log of the changes included since the 2013-02-13
release:
SNIP -- you'll have to check it yourself:
git log master-2013-02-13..master-2013-10-11 | git shortlog
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply
* Re: Regression in commit 0d528d8
From: Larry Finger @ 2013-10-11 19:59 UTC (permalink / raw)
To: Felix Fietkau; +Cc: Johannes Berg, linux-wireless
In-Reply-To: <525855E1.1010207@openwrt.org>
On 10/11/2013 02:47 PM, Felix Fietkau wrote:
> On 2013-10-11 9:42 PM, Larry Finger wrote:
>> On 10/10/2013 04:35 PM, Felix Fietkau wrote:
>>> I don't recall any necessary extra actions introduced by this patch.
>>> Please compare the rate selection info passed to the driver before and
>>> after this patch, by dumping info->control.rates.
>>
>> I dumped the structure returned by ieee80211_get_tx_rate(hw, info) and found the
>> same values for the case that worked and the one that failed. The values were:
>> flags 0xc, bitrate 0xa, hw_value 0x0, and hw_value_short 0x0.
> I guess then we need to take another look at what exactly happens when
> the connection fails, I have no idea how that commit can affect rtlwifi.
With NetworkManager, the interface authenticates and associates normally, but it
seems that DHCP never completes. I will fire up my trusty machine that handles
kismet and get a dump of what is on the air.
Larry
^ permalink raw reply
* Re: Regression in commit 0d528d8
From: Felix Fietkau @ 2013-10-11 19:47 UTC (permalink / raw)
To: Larry Finger; +Cc: Johannes Berg, linux-wireless
In-Reply-To: <525854AD.5020607@lwfinger.net>
On 2013-10-11 9:42 PM, Larry Finger wrote:
> On 10/10/2013 04:35 PM, Felix Fietkau wrote:
>> I don't recall any necessary extra actions introduced by this patch.
>> Please compare the rate selection info passed to the driver before and
>> after this patch, by dumping info->control.rates.
>
> I dumped the structure returned by ieee80211_get_tx_rate(hw, info) and found the
> same values for the case that worked and the one that failed. The values were:
> flags 0xc, bitrate 0xa, hw_value 0x0, and hw_value_short 0x0.
I guess then we need to take another look at what exactly happens when
the connection fails, I have no idea how that commit can affect rtlwifi.
- Felix
^ permalink raw reply
* Re: Regression in commit 0d528d8
From: Larry Finger @ 2013-10-11 19:42 UTC (permalink / raw)
To: Felix Fietkau; +Cc: Johannes Berg, linux-wireless
In-Reply-To: <52571DAA.60502@openwrt.org>
On 10/10/2013 04:35 PM, Felix Fietkau wrote:
> I don't recall any necessary extra actions introduced by this patch.
> Please compare the rate selection info passed to the driver before and
> after this patch, by dumping info->control.rates.
I dumped the structure returned by ieee80211_get_tx_rate(hw, info) and found the
same values for the case that worked and the one that failed. The values were:
flags 0xc, bitrate 0xa, hw_value 0x0, and hw_value_short 0x0.
Larry
^ permalink raw reply
* [PATCH v4 6/6] mac80211: process mesh channel switching using beacon
From: Chun-Yeow Yeoh @ 2013-10-11 18:29 UTC (permalink / raw)
To: linux-wireless; +Cc: johannes, linville, devel, distro11s, Chun-Yeow Yeoh
In-Reply-To: <1381516190-23918-1-git-send-email-yeohchunyeow@cozybit.com>
Trigger the mesh channel switching procedure if the mesh STA
happens to miss the CSA action frame but able to receive the
beacon containing the CSA and MCSP elements from its peer
mesh STAs.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
---
v2: fix return value (Johannes Berg)
net/mac80211/mesh.c | 132 +++++++++++++++++++++++++++++++++++++++++++---
net/mac80211/spectmgmt.c | 6 +++
2 files changed, 130 insertions(+), 8 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d8ea26d..3b6e007 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -851,6 +851,124 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
ieee80211_configure_filter(local);
}
+static bool
+ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
+ struct ieee802_11_elems *elems, bool beacon)
+{
+ struct cfg80211_csa_settings params;
+ struct ieee80211_csa_ie csa_ie;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ struct ieee80211_chanctx *chanctx;
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
+ int err, num_chanctx;
+ u32 sta_flags;
+
+ if (sdata->vif.csa_active)
+ return true;
+
+ if (!ifmsh->mesh_id)
+ return false;
+
+ sta_flags = IEEE80211_STA_DISABLE_VHT;
+ switch (sdata->vif.bss_conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ sta_flags |= IEEE80211_STA_DISABLE_HT;
+ case NL80211_CHAN_WIDTH_20:
+ sta_flags |= IEEE80211_STA_DISABLE_40MHZ;
+ break;
+ default:
+ break;
+ }
+
+ memset(¶ms, 0, sizeof(params));
+ memset(&csa_ie, 0, sizeof(csa_ie));
+ err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, band,
+ sta_flags, sdata->vif.addr,
+ &csa_ie);
+ if (err < 0)
+ return false;
+ if (err)
+ return false;
+
+ params.chandef = csa_ie.chandef;
+ params.count = csa_ie.count;
+
+ if (sdata->vif.bss_conf.chandef.chan->band !=
+ params.chandef.chan->band)
+ return false;
+
+ if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef,
+ IEEE80211_CHAN_DISABLED)) {
+ sdata_info(sdata,
+ "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
+ sdata->vif.addr,
+ params.chandef.chan->center_freq,
+ params.chandef.width,
+ params.chandef.center_freq1,
+ params.chandef.center_freq2);
+ return false;
+ }
+
+ err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
+ ¶ms.chandef);
+ if (err < 0)
+ return false;
+ if (err) {
+ params.radar_required = true;
+ /* TODO: DFS not (yet) supported */
+ return false;
+ }
+
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (!chanctx_conf)
+ goto failed_chswitch;
+
+ /* don't handle for multi-VIF cases */
+ chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
+ if (chanctx->refcount > 1)
+ goto failed_chswitch;
+
+ num_chanctx = 0;
+ list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list)
+ num_chanctx++;
+
+ if (num_chanctx > 1)
+ goto failed_chswitch;
+
+ rcu_read_unlock();
+
+ mcsa_dbg(sdata,
+ "received channel switch announcement to go to channel %d MHz\n",
+ params.chandef.chan->center_freq);
+
+ params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
+ if (beacon)
+ ifmsh->chsw_ttl = csa_ie.ttl - 1;
+
+ if (ifmsh->chsw_ttl > 0)
+ ieee80211_mesh_csa_beacon(sdata, ¶ms, false);
+
+ sdata->csa_radar_required = params.radar_required;
+
+ if (params.block_tx)
+ ieee80211_stop_queues_by_reason(&sdata->local->hw,
+ IEEE80211_MAX_QUEUE_MAP,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
+ sdata->local->csa_chandef = params.chandef;
+ sdata->vif.csa_active = true;
+
+ ieee80211_bss_info_change_notify(sdata, err);
+ drv_channel_switch_beacon(sdata, ¶ms.chandef);
+
+ return true;
+failed_chswitch:
+ rcu_read_unlock();
+ return false;
+}
+
static void
ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
@@ -957,6 +1075,9 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
if (ifmsh->sync_ops)
ifmsh->sync_ops->rx_bcn_presp(sdata,
stype, mgmt, &elems, rx_status);
+
+ if (!ifmsh->chsw_init)
+ ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
@@ -1052,7 +1173,7 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee802_11_elems elems;
u16 pre_value;
- bool block_tx, fwd_csa = true;
+ bool fwd_csa = true;
size_t baselen;
u8 *pos, ttl;
@@ -1081,13 +1202,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
mcsa_dbg(sdata, "Failed to forward the CSA frame");
}
- /* block the Tx only after forwarding the CSA frame if required */
- block_tx = elems.mesh_chansw_params_ie->mesh_flags &
- WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
- if (block_tx)
- ieee80211_stop_queues_by_reason(&sdata->local->hw,
- IEEE80211_MAX_QUEUE_MAP,
- IEEE80211_QUEUE_STOP_REASON_CSA);
+ if (!ieee80211_mesh_process_chnswitch(sdata, &elems, false))
+ mcsa_dbg(sdata, "Failed to process CSA action frame");
}
static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index a298e12..a40da20 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -74,6 +74,12 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
return 1;
}
+ /* Mesh Channel Switch Parameters Element */
+ if (elems->mesh_chansw_params_ie) {
+ csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl;
+ csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags;
+ }
+
new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band);
new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) {
--
1.7.9.5
^ permalink raw reply related
* [PATCH v4 5/6] {nl,cfg,mac}80211: finalizing mesh channel switching
From: Chun-Yeow Yeoh @ 2013-10-11 18:29 UTC (permalink / raw)
To: linux-wireless; +Cc: johannes, linville, devel, distro11s, Chun-Yeow Yeoh
In-Reply-To: <1381516190-23918-1-git-send-email-yeohchunyeow@cozybit.com>
Finalizing the required procedures for channel switching completion based
on the procedures defined in the IEEE Std 802.11-2012 section 10.9.8.4.3:
* Add the function for updating the beacon and probe response frames
with CSA and MCSP elements during the period of switching to the new
channel.
* The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements
will then be removed from the beacon or probe response frames once the
new channel is switched to.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
---
v2: fix typo mistake, commit message and return value (Johannes Berg)
v3: use RCU to protect csa_settings for beaconing (Johannes Berg)
v4: fix broken kfree with kree_rcu (Johannes Berg)
include/net/cfg80211.h | 2 ++
net/mac80211/cfg.c | 7 ++++-
net/mac80211/ieee80211_i.h | 4 +++
net/mac80211/mesh.c | 67 +++++++++++++++++++++++++++++++++++++++++---
net/mac80211/rx.c | 5 +++-
net/mac80211/tx.c | 16 +++++++++++
net/wireless/nl80211.c | 3 +-
7 files changed, 97 insertions(+), 7 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 47fdb1d..ccdb692 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -679,6 +679,7 @@ struct cfg80211_ap_settings {
*
* Used for channel switch
*
+ * @rcu_head: rcu head for freeing structure
* @chandef: defines the channel to use after the switch
* @beacon_csa: beacon data while performing the switch
* @counter_offset_beacon: offset for the counter within the beacon (tail)
@@ -689,6 +690,7 @@ struct cfg80211_ap_settings {
* @count: number of beacons until switch
*/
struct cfg80211_csa_settings {
+ struct rcu_head rcu_head;
struct cfg80211_chan_def chandef;
struct cfg80211_beacon_data beacon_csa;
u16 counter_offset_beacon, counter_offset_presp;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 438c689..a0b41d7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2887,6 +2887,11 @@ void ieee80211_csa_finalize_work(struct work_struct *work)
case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_finish_csa(sdata);
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ err = ieee80211_mesh_finish_csa(sdata);
+ if (err < 0)
+ return;
+ break;
default:
WARN_ON(1);
return;
@@ -3005,7 +3010,7 @@ static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
params->chandef.chan->band)
return -EINVAL;
- err = ieee80211_send_action_csa(sdata, params);
+ err = ieee80211_mesh_csa_beacon(sdata, params, true);
if (err < 0)
return err;
break;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 963a592..227e3cc 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1353,6 +1353,10 @@ void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata);
void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata);
void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
+int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_csa_settings *csa_settings,
+ bool csa_action);
+int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata);
/* scan/BSS handling */
void ieee80211_scan_work(struct work_struct *work);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index f849153..d8ea26d 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -12,6 +12,7 @@
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "mesh.h"
+#include "driver-ops.h"
static int mesh_allocated;
static struct kmem_cache *rm_cache;
@@ -610,6 +611,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
struct ieee80211_chanctx_conf *chanctx_conf;
+ struct cfg80211_csa_settings *csa;
enum ieee80211_band band;
u8 *pos;
struct ieee80211_sub_if_data *sdata;
@@ -669,7 +671,9 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
- if (ifmsh->csa_settings) {
+ rcu_read_lock();
+ csa = rcu_dereference(ifmsh->csa_settings);
+ if (csa) {
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
__le16 pre_value;
@@ -679,9 +683,9 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
*pos++ = 3;
*pos++ = 0x0;
*pos++ = ieee80211_frequency_to_channel(
- ifmsh->csa_settings->chandef.chan->center_freq);
+ csa->chandef.chan->center_freq);
sdata->csa_counter_offset_beacon = hdr_len + 6;
- *pos++ = ifmsh->csa_settings->count;
+ *pos++ = csa->count;
*pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
*pos++ = 6;
if (ifmsh->chsw_init) {
@@ -690,7 +694,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
} else {
*pos++ = ifmsh->chsw_ttl;
}
- *pos++ |= ifmsh->csa_settings->block_tx ?
+ *pos++ |= csa->block_tx ?
WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
pos += 2;
@@ -698,6 +702,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
memcpy(pos, &pre_value, 2);
pos += 2;
}
+ rcu_read_unlock();
if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
mesh_add_ds_params_ie(sdata, skb))
@@ -954,6 +959,60 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
stype, mgmt, &elems, rx_status);
}
+int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct cfg80211_csa_settings *tmp_csa_settings;
+ int ret = 0;
+
+ /* Remove the CSA and MCSP elements from the beacon */
+ tmp_csa_settings = rcu_dereference(ifmsh->csa_settings);
+ rcu_assign_pointer(ifmsh->csa_settings, NULL);
+ kfree_rcu(tmp_csa_settings, rcu_head);
+ ret = ieee80211_mesh_rebuild_beacon(sdata);
+ if (ret)
+ return -EINVAL;
+
+ /* Reset the TTL value and Initiator flag */
+ ifmsh->chsw_init = false;
+ ifmsh->chsw_ttl = 0;
+
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+
+ mcsa_dbg(sdata, "complete switching to center freq %d MHz",
+ sdata->vif.bss_conf.chandef.chan->center_freq);
+ return 0;
+}
+
+int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_csa_settings *csa_settings,
+ bool csa_action)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ struct cfg80211_csa_settings *tmp_csa_settings;
+ int ret = 0;
+
+ if (csa_action)
+ ieee80211_send_action_csa(sdata, csa_settings);
+
+ tmp_csa_settings = kmalloc(sizeof(struct cfg80211_csa_settings),
+ GFP_ATOMIC);
+ if (!tmp_csa_settings)
+ return -ENOMEM;
+
+ memcpy(tmp_csa_settings, csa_settings,
+ sizeof(struct cfg80211_csa_settings));
+
+ rcu_assign_pointer(ifmsh->csa_settings, tmp_csa_settings);
+
+ ret = ieee80211_mesh_rebuild_beacon(sdata);
+ if (ret)
+ return -EINVAL;
+
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
+ return 0;
+}
+
static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 8e908e1..0ba1fad 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2592,13 +2592,16 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
break;
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
- sdata->vif.type != NL80211_IFTYPE_ADHOC)
+ sdata->vif.type != NL80211_IFTYPE_ADHOC &&
+ sdata->vif.type != NL80211_IFTYPE_MESH_POINT)
break;
if (sdata->vif.type == NL80211_IFTYPE_STATION)
bssid = sdata->u.mgd.bssid;
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
bssid = sdata->u.ibss.bssid;
+ else if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ bssid = mgmt->sa;
else
break;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4fcbf63..80b9a57 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2369,6 +2369,10 @@ static void ieee80211_update_csa(struct ieee80211_sub_if_data *sdata,
beacon_data = beacon->head;
beacon_data_len = beacon->head_len;
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ beacon_data = beacon->head;
+ beacon_data_len = beacon->head_len;
+ break;
default:
return;
}
@@ -2425,6 +2429,15 @@ bool ieee80211_csa_is_complete(struct ieee80211_vif *vif)
beacon_data = beacon->head;
beacon_data_len = beacon->head_len;
+ } else if (vif->type == NL80211_IFTYPE_MESH_POINT) {
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+ beacon = rcu_dereference(ifmsh->beacon);
+ if (!beacon)
+ goto out;
+
+ beacon_data = beacon->head;
+ beacon_data_len = beacon->head_len;
} else {
WARN_ON(1);
goto out;
@@ -2530,6 +2543,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
if (!bcn)
goto out;
+ if (sdata->vif.csa_active)
+ ieee80211_update_csa(sdata, bcn);
+
if (ifmsh->sync_ops)
ifmsh->sync_ops->adjust_tbtt(
sdata);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7bb5aca..be844d4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -10760,7 +10760,8 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP &&
wdev->iftype != NL80211_IFTYPE_P2P_GO &&
- wdev->iftype != NL80211_IFTYPE_ADHOC))
+ wdev->iftype != NL80211_IFTYPE_ADHOC &&
+ wdev->iftype != NL80211_IFTYPE_MESH_POINT))
goto out;
wdev->channel = chandef->chan;
--
1.7.9.5
^ permalink raw reply related
* [PATCH v4 4/6] mac80211: refactor the parsing of chan switch ie
From: Chun-Yeow Yeoh @ 2013-10-11 18:29 UTC (permalink / raw)
To: linux-wireless; +Cc: johannes, linville, devel, distro11s, Chun-Yeow Yeoh
In-Reply-To: <1381516190-23918-1-git-send-email-yeohchunyeow@cozybit.com>
Refactor the channel switch IE parsing to reduce the number
of function parameters.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
---
v3: refactor ieee80211_parse_ch_switch_ie to have less function
parameters (Johannes Berg)
net/mac80211/ibss.c | 13 +++++++------
net/mac80211/ieee80211_i.h | 17 ++++++++++++-----
net/mac80211/mlme.c | 32 +++++++++++++++-----------------
net/mac80211/spectmgmt.c | 27 ++++++++++++++-------------
4 files changed, 48 insertions(+), 41 deletions(-)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 017e206..d6b80ef 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -730,13 +730,13 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
bool beacon)
{
struct cfg80211_csa_settings params;
+ struct ieee80211_csa_ie csa_ie;
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_chanctx *chanctx;
enum nl80211_channel_type ch_type;
int err, num_chanctx;
u32 sta_flags;
- u8 mode;
if (sdata->vif.csa_active)
return true;
@@ -759,12 +759,10 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
}
memset(¶ms, 0, sizeof(params));
+ memset(&csa_ie, 0, sizeof(csa_ie));
err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon,
ifibss->chandef.chan->band,
- sta_flags, ifibss->bssid,
- ¶ms.count, &mode,
- ¶ms.chandef);
-
+ sta_flags, ifibss->bssid, &csa_ie);
/* can't switch to destination channel, fail */
if (err < 0)
goto disconnect;
@@ -773,6 +771,9 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
if (err)
return false;
+ params.count = csa_ie.count;
+ params.chandef = csa_ie.chandef;
+
if (ifibss->chandef.chan->band != params.chandef.chan->band)
goto disconnect;
@@ -859,7 +860,7 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
"received channel switch announcement to go to channel %d MHz\n",
params.chandef.chan->center_freq);
- params.block_tx = !!mode;
+ params.block_tx = !!csa_ie.mode;
ieee80211_ibss_csa_beacon(sdata, ¶ms);
sdata->csa_radar_required = params.radar_required;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f10907f..963a592 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1208,6 +1208,14 @@ struct ieee80211_ra_tid {
u16 tid;
};
+/* this struct holds the value parsing from channel switch IE */
+struct ieee80211_csa_ie {
+ struct cfg80211_chan_def chandef;
+ u8 mode;
+ u8 count;
+ u8 ttl;
+};
+
/* Parsed Information Elements */
struct ieee802_11_elems {
const u8 *ie_start;
@@ -1503,17 +1511,16 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
* %IEEE80211_STA_DISABLE_HT, %IEEE80211_STA_DISABLE_VHT,
* %IEEE80211_STA_DISABLE_40MHZ, %IEEE80211_STA_DISABLE_80P80MHZ,
* %IEEE80211_STA_DISABLE_160MHZ.
- * @count: to be filled with the counter until the switch (on success only)
* @bssid: the currently connected bssid (for reporting)
- * @mode: to be filled with CSA mode (on success only)
- * @new_chandef: to be filled with destination chandef (on success only)
+ * @csa_ie: parsed 802.11 csa elements on count, mode, chandef and mesh ttl.
+ All of them will be filled with if success only.
* Return: 0 on success, <0 on error and >0 if there is nothing to parse.
*/
int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
struct ieee802_11_elems *elems, bool beacon,
enum ieee80211_band current_band,
- u32 sta_flags, u8 *bssid, u8 *count, u8 *mode,
- struct cfg80211_chan_def *new_chandef);
+ u32 sta_flags, u8 *bssid,
+ struct ieee80211_csa_ie *csa_ie);
/* Suspend/resume and hw reconfiguration */
int ieee80211_reconfig(struct ieee80211_local *local);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9fce0f4..16e4238 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -941,9 +941,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *cbss = ifmgd->associated;
struct ieee80211_chanctx *chanctx;
enum ieee80211_band current_band;
- u8 count;
- u8 mode;
- struct cfg80211_chan_def new_chandef = {};
+ struct ieee80211_csa_ie csa_ie;
int res;
sdata_assert_lock(sdata);
@@ -959,24 +957,24 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
return;
current_band = cbss->channel->band;
+ memset(&csa_ie, 0, sizeof(csa_ie));
res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band,
ifmgd->flags,
- ifmgd->associated->bssid, &count,
- &mode, &new_chandef);
+ ifmgd->associated->bssid, &csa_ie);
if (res < 0)
ieee80211_queue_work(&local->hw,
&ifmgd->csa_connection_drop_work);
if (res)
return;
- if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef,
+ if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
IEEE80211_CHAN_DISABLED)) {
sdata_info(sdata,
"AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
ifmgd->associated->bssid,
- new_chandef.chan->center_freq,
- new_chandef.width, new_chandef.center_freq1,
- new_chandef.center_freq2);
+ csa_ie.chandef.chan->center_freq,
+ csa_ie.chandef.width, csa_ie.chandef.center_freq1,
+ csa_ie.chandef.center_freq2);
ieee80211_queue_work(&local->hw,
&ifmgd->csa_connection_drop_work);
return;
@@ -1009,9 +1007,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
}
mutex_unlock(&local->chanctx_mtx);
- local->csa_chandef = new_chandef;
+ local->csa_chandef = csa_ie.chandef;
- if (mode)
+ if (csa_ie.mode)
ieee80211_stop_queues_by_reason(&local->hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_CSA);
@@ -1020,9 +1018,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
/* use driver's channel switch callback */
struct ieee80211_channel_switch ch_switch = {
.timestamp = timestamp,
- .block_tx = mode,
- .chandef = new_chandef,
- .count = count,
+ .block_tx = csa_ie.mode,
+ .chandef = csa_ie.chandef,
+ .count = csa_ie.count,
};
drv_channel_switch(local, &ch_switch);
@@ -1030,11 +1028,11 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
}
/* channel switch handled in software */
- if (count <= 1)
+ if (csa_ie.count <= 1)
ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
else
mod_timer(&ifmgd->chswitch_timer,
- TU_TO_EXP_TIME(count * cbss->beacon_interval));
+ TU_TO_EXP_TIME(csa_ie.count * cbss->beacon_interval));
}
static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
@@ -3965,7 +3963,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
}
/* prepare assoc data */
-
+
ifmgd->beacon_crc_valid = false;
/*
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 921597e..a298e12 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -24,8 +24,8 @@
int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
struct ieee802_11_elems *elems, bool beacon,
enum ieee80211_band current_band,
- u32 sta_flags, u8 *bssid, u8 *count, u8 *mode,
- struct cfg80211_chan_def *new_chandef)
+ u32 sta_flags, u8 *bssid,
+ struct ieee80211_csa_ie *csa_ie)
{
enum ieee80211_band new_band;
int new_freq;
@@ -62,13 +62,13 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
return -EINVAL;
}
new_chan_no = elems->ext_chansw_ie->new_ch_num;
- *count = elems->ext_chansw_ie->count;
- *mode = elems->ext_chansw_ie->mode;
+ csa_ie->count = elems->ext_chansw_ie->count;
+ csa_ie->mode = elems->ext_chansw_ie->mode;
} else if (elems->ch_switch_ie) {
new_band = current_band;
new_chan_no = elems->ch_switch_ie->new_ch_num;
- *count = elems->ch_switch_ie->count;
- *mode = elems->ch_switch_ie->mode;
+ csa_ie->count = elems->ch_switch_ie->count;
+ csa_ie->mode = elems->ch_switch_ie->mode;
} else {
/* nothing here we understand */
return 1;
@@ -103,25 +103,26 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
default:
/* secondary_channel_offset was present but is invalid */
case IEEE80211_HT_PARAM_CHA_SEC_NONE:
- cfg80211_chandef_create(new_chandef, new_chan,
+ cfg80211_chandef_create(&csa_ie->chandef, new_chan,
NL80211_CHAN_HT20);
break;
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- cfg80211_chandef_create(new_chandef, new_chan,
+ cfg80211_chandef_create(&csa_ie->chandef, new_chan,
NL80211_CHAN_HT40PLUS);
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- cfg80211_chandef_create(new_chandef, new_chan,
+ cfg80211_chandef_create(&csa_ie->chandef, new_chan,
NL80211_CHAN_HT40MINUS);
break;
case -1:
- cfg80211_chandef_create(new_chandef, new_chan,
+ cfg80211_chandef_create(&csa_ie->chandef, new_chan,
NL80211_CHAN_NO_HT);
/* keep width for 5/10 MHz channels */
switch (sdata->vif.bss_conf.chandef.width) {
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
- new_chandef->width = sdata->vif.bss_conf.chandef.width;
+ csa_ie->chandef.width =
+ sdata->vif.bss_conf.chandef.width;
break;
default:
break;
@@ -171,13 +172,13 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
/* if VHT data is there validate & use it */
if (new_vht_chandef.chan) {
if (!cfg80211_chandef_compatible(&new_vht_chandef,
- new_chandef)) {
+ &csa_ie->chandef)) {
sdata_info(sdata,
"BSS %pM: CSA has inconsistent channel data, disconnecting\n",
bssid);
return -EINVAL;
}
- *new_chandef = new_vht_chandef;
+ csa_ie->chandef = new_vht_chandef;
}
return 0;
--
1.7.9.5
^ permalink raw reply related
* [PATCH v4 3/6] mac80211: add the CSA and MCSP elements in mesh beaconing
From: Chun-Yeow Yeoh @ 2013-10-11 18:29 UTC (permalink / raw)
To: linux-wireless; +Cc: johannes, linville, devel, distro11s, Chun-Yeow Yeoh
In-Reply-To: <1381516190-23918-1-git-send-email-yeohchunyeow@cozybit.com>
Support the adding of CSA and MCSP elements while building the beacon
for mesh if necessary. This is defined in the IEEE Std 802.11-2012
section 10.9.8.4.3 that both CSA and MCSP elements must be included
in beacon and probe response frames until the intended channel
switch time.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
---
net/mac80211/ieee80211_i.h | 2 ++
net/mac80211/mesh.c | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 829ff7e..f10907f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -599,7 +599,9 @@ struct ieee80211_if_mesh {
int ps_peers_deep_sleep;
struct ps_data ps;
/* Channel Switching Support */
+ struct cfg80211_csa_settings *csa_settings;
bool chsw_init;
+ u8 chsw_ttl;
u16 pre_value;
};
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0a3ccaa..f849153 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -624,6 +624,10 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
head_len = hdr_len +
2 + /* NULL SSID */
+ /* Channel Switch Announcement */
+ 2 + sizeof(struct ieee80211_channel_sw_ie) +
+ /* Mesh Channel Swith Parameters */
+ 2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
2 + 8 + /* supported rates */
2 + 3; /* DS params */
tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
@@ -665,6 +669,36 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
+ if (ifmsh->csa_settings) {
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ __le16 pre_value;
+
+ pos = skb_put(skb, 13);
+ memset(pos, 0, 13);
+ *pos++ = WLAN_EID_CHANNEL_SWITCH;
+ *pos++ = 3;
+ *pos++ = 0x0;
+ *pos++ = ieee80211_frequency_to_channel(
+ ifmsh->csa_settings->chandef.chan->center_freq);
+ sdata->csa_counter_offset_beacon = hdr_len + 6;
+ *pos++ = ifmsh->csa_settings->count;
+ *pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
+ *pos++ = 6;
+ if (ifmsh->chsw_init) {
+ *pos++ = ifmsh->mshcfg.dot11MeshTTL;
+ *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
+ } else {
+ *pos++ = ifmsh->chsw_ttl;
+ }
+ *pos++ |= ifmsh->csa_settings->block_tx ?
+ WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
+ put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
+ pos += 2;
+ pre_value = cpu_to_le16(ifmsh->pre_value);
+ memcpy(pos, &pre_value, 2);
+ pos += 2;
+ }
+
if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
mesh_add_ds_params_ie(sdata, skb))
goto out_free;
@@ -942,6 +976,7 @@ static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
offset_ttl = (len < 42) ? 7 : 10;
*(pos + offset_ttl) -= 1;
*(pos + offset_ttl + 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
+ sdata->u.mesh.chsw_ttl = *(pos + offset_ttl);
memcpy(mgmt_fwd, mgmt, len);
eth_broadcast_addr(mgmt_fwd->da);
--
1.7.9.5
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox