* [RTL8723AE] Driver problems
From: André Martins @ 2013-10-18 0:55 UTC (permalink / raw)
To: linux-wireless
Hi!
This is a copy I've sent to Larry Finger and his bot told me to sent to
this e-mail address instead.
Basically I've bought a computer with the 8723ae card and unfortunately the
wireless connection is really bad. Although I'm a last year student on
MSc in
computers and telematics engineering I don't have any skills what so
ever on
kernel's source code. Thus, I want to ask you if you could help me out
and tell
me where to begin to fix this and create a great rtl8723ae driver for
Linux. I
could help you with the tests what whatever I could. The main problem
with this
card is the connection on my university, it's always dropping and
impossible to
have a stable connection. On my house I'm a few meters way of my AP and
the link
quality is either on 38/70 or 70/70.
Since you take the time to read this e-mail I thank you already.
Thanks,
André Martins
^ permalink raw reply
* Re: [PATCH 00/23 v2] cleanup: introduce br/netdev/netif/wiphy_<foo>_ratelimited() and use them to simplify code
From: Joe Perches @ 2013-10-18 4:11 UTC (permalink / raw)
To: Kefeng Wang; +Cc: linux-kernel, netfilter, netdev, linux-wireless
In-Reply-To: <1382068363-10088-1-git-send-email-wangkefeng.wang@huawei.com>
(resending to lists only because of multiple X's in the subject line)
On Fri, 2013-10-18 at 11:52 +0800, Kefeng Wang wrote:
> v1-v2:
>
> Introduce macro br/netdev/netif/wiphy_XXX_ratelimited() according
> to Joe Perches's advice. The macros are similar to net_XXX_ratelimited()
> which is more clarifying than net_ratelimited_function(), then use them
> to simplify code.
There are some conceptual differences between these
implementations and other <foo>_ratelimited uses.
For every other subsystem but net, there is a per-location
struct ratelimit_state.
Here you've made the global net_ratelimit_state replace all
of these individual structs so there is some new interaction.
Dunno if that's good or bad.
^ permalink raw reply
* Re: [RTL8723AE] Driver problems
From: Oleksij Rempel @ 2013-10-18 5:30 UTC (permalink / raw)
To: André Martins, linux-wireless
In-Reply-To: <BLU0-SMTP28669C5469915F5D8D155AF89060@phx.gbl>
Am 18.10.2013 02:55, schrieb André Martins:
> Hi!
> This is a copy I've sent to Larry Finger and his bot told me to sent to
> this e-mail address instead.
> Basically I've bought a computer with the 8723ae card and unfortunately the
> wireless connection is really bad. Although I'm a last year student on
> MSc in
> computers and telematics engineering I don't have any skills what so
> ever on
> kernel's source code. Thus, I want to ask you if you could help me out
> and tell
> me where to begin to fix this and create a great rtl8723ae driver for
> Linux. I
> could help you with the tests what whatever I could. The main problem
> with this
> card is the connection on my university, it's always dropping and
> impossible to
> have a stable connection. On my house I'm a few meters way of my AP and
> the link
> quality is either on 38/70 or 70/70.
> Since you take the time to read this e-mail I thank you already.
> Thanks,
> André Martins
Hi André,
start with googling for "linux wlan troubleshooting".
Use latest kernel wifi source code:
https://git.kernel.org/cgit/linux/kernel/git/linville/wireless-next.git/
If you can compile kernel by your self, then you can do some changes on
kernel. See how driver works, add "printk("%s:%i\ņ", __func__,
__LINE__);" every where and monitore dmesg. The driver is located here:
linux/drivers/net/wireless/rtlwifi/rtl8723ae
If you wont to help with this driver, do not fear to brake you kernel ;)
--
Regards,
Oleksij
^ permalink raw reply
* Re: [PATCH 00/21] rt2x00: separate rt2800 PCI and SoC driver
From: Gabor Juhos @ 2013-10-18 7:57 UTC (permalink / raw)
To: Helmut Schaa; +Cc: John W. Linville, linux-wireless, rt2x00 Users List
In-Reply-To: <CAGXE3d_HZZrEspONsjoqGrynGKYN9pisX-jgRZdV760uuVq5cQ@mail.gmail.com>
Hi Helmut,
> On Thu, Oct 17, 2013 at 9:42 AM, Gabor Juhos <juhosg@openwrt.org> wrote:
>> The rt2800pci driver supports both PCI and SoC device. To achieve
>> this, the code uses several ifdef statements which makes the code
>> quite ugly. The patch set introduces a shared module, and moves the
>> SoC driver into a separate module to get rid of the mess.
>
> Nice series. Does this also reduce module size on when building for
> SoC without PCI support?
Nope. On the contrary, there is a small increase due to the new rt2800mmio
module (compiled for RT305x SoCs):
before:
text data bss dec hex filename
7232 96 16 7344 1cb0 rt2800pci.o
after:
text data bss dec hex filename
1934 100 16 2050 802 rt2800soc.o
5664 0 0 5664 1620 rt2800mmio.o
delta:
+366 +4 0 +370
-Gabor
^ permalink raw reply
* Re: [PATCH 3.12] rt2800usb: slow down TX status polling
From: Stanislaw Gruszka @ 2013-10-18 9:42 UTC (permalink / raw)
To: Larry Finger; +Cc: linux-wireless, users
In-Reply-To: <525FF68A.8030806@lwfinger.net>
On Thu, Oct 17, 2013 at 09:39:06AM -0500, Larry Finger wrote:
> I suggest getting rid of the magic numbers as long as you are making
> this change. A single define could handle the delay time for the two
> cases.
Thanks for sugestion Larry, though I do not see clear benefit of
introduce define since those magic numbers are just time values
expressed in nano seconds. Anyway patch with define added below.
John can pick it, if he thinks it is better.
Stanislaw
---
>From 813e0bde7340bad7d3401c6aa2a3f8635ec49597 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Fri, 18 Oct 2013 11:36:54 +0200
Subject: [PATCH] rt2800usb: slow down TX status polling
Polling TX statuses too frequently has two negative effects. First is
randomly peek CPU usage, causing overall system functioning delays.
Second bad effect is that device is not able to fill TX statuses in
H/W register on some workloads and we get lot of timeouts like below:
ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping
This not only cause flood of messages in dmesg, but also bad throughput,
since rate scaling algorithm can not work optimally.
In the future, we should probably make polling interval be adjusted
automatically, but for now just increase values, this make mentioned
problems gone.
Resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=62781
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/rt2x00/rt2800usb.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 96677ce5..997df03 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -148,6 +148,8 @@ static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
return false;
}
+#define TXSTATUS_READ_INTERVAL 1000000
+
static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
int urb_status, u32 tx_status)
{
@@ -176,8 +178,9 @@ static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
if (rt2800usb_txstatus_pending(rt2x00dev)) {
- /* Read register after 250 us */
- hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
+ /* Read register after 1 ms */
+ hrtimer_start(&rt2x00dev->txstatus_timer,
+ ktime_set(0, TXSTATUS_READ_INTERVAL),
HRTIMER_MODE_REL);
return false;
}
@@ -202,8 +205,9 @@ static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
return;
- /* Read TX_STA_FIFO register after 500 us */
- hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 500000),
+ /* Read TX_STA_FIFO register after 2 ms */
+ hrtimer_start(&rt2x00dev->txstatus_timer,
+ ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
HRTIMER_MODE_REL);
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH 1/2] ath10k: remove P2P from supported interface modes for 10.X FW
From: Bartosz Markowski @ 2013-10-18 10:07 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
FW 10.X does not support P2P, stop advertising it to mac80211.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 44 +++++++++++++++++++++++++++------
1 file changed, 37 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0b1cc51..af046c4 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3249,6 +3249,17 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
},
};
+static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
+ {
+ .max = 8,
+ .types = BIT(NL80211_IFTYPE_STATION)
+ },
+ {
+ .max = 7,
+ .types = BIT(NL80211_IFTYPE_AP)
+ },
+};
+
static const struct ieee80211_iface_combination ath10k_if_comb = {
.limits = ath10k_if_limits,
.n_limits = ARRAY_SIZE(ath10k_if_limits),
@@ -3257,6 +3268,14 @@ static const struct ieee80211_iface_combination ath10k_if_comb = {
.beacon_int_infra_match = true,
};
+static const struct ieee80211_iface_combination ath10k_10x_if_comb = {
+ .limits = ath10k_10x_if_limits,
+ .n_limits = ARRAY_SIZE(ath10k_10x_if_limits),
+ .max_interfaces = 8,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+};
+
static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
{
struct ieee80211_sta_vht_cap vht_cap = {0};
@@ -3430,12 +3449,19 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
}
- ar->hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_P2P_CLIENT) |
- BIT(NL80211_IFTYPE_P2P_GO);
+ /* 10.x firmware does not support P2P */
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ar->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP);
+ else
+ ar->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
@@ -3478,7 +3504,11 @@ int ath10k_mac_register(struct ath10k *ar)
*/
ar->hw->queues = 4;
- ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ar->hw->wiphy->iface_combinations = &ath10k_10x_if_comb;
+ else
+ ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
+
ar->hw->wiphy->n_iface_combinations = 1;
ar->hw->netdev_features = NETIF_F_HW_CSUM;
--
1.7.10
^ permalink raw reply related
* [PATCH 2/2] ath10k: extend number of AP interfaces for 10.X firmware
From: Bartosz Markowski @ 2013-10-18 10:07 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Bartosz Markowski
In-Reply-To: <1382090878-22216-1-git-send-email-bartosz.markowski@tieto.com>
This firmware can support up to 8 AP interfaces.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index af046c4..dc65dcd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3255,7 +3255,7 @@ static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
.types = BIT(NL80211_IFTYPE_STATION)
},
{
- .max = 7,
+ .max = 8,
.types = BIT(NL80211_IFTYPE_AP)
},
};
--
1.7.10
^ permalink raw reply related
* regarding Linux Wifi driver
From: Daniel Wrede @ 2013-10-18 11:35 UTC (permalink / raw)
To: linux-wireless@vger.kernel.org; +Cc: sgruszka@redhat.com
Hello,
I do have a question regarding the drivers on http://wireless.kernel.org/en/users/Drivers/iwlegacy
My kernel version is 3.8.0-19-generic. Which driver should I use for the WiFi Link 4965AGN? I am a little confused by the numbering.
Thank you very much.
Best regards,
Daniel Wrede
^ permalink raw reply
* Bug with monitor mode on Intel 7260 AC
From: Mark Wu @ 2013-10-18 12:23 UTC (permalink / raw)
To: linux-wireless
I'm using Intel 7260 AC with this driver:
https://www.kernel.org/pub/linux/kernel/projects/backports/stable/v3.11-rc3/ ,
with the "iwlwifi-7260-7.ucode" firmware. I'm using it in monitor mode to
capture 802.11ac packets on channel 36. It works well, I can capture VHT
packets without problems, but only as long as the number of packets per second
being captured is relatively low, e.g. 10 or 20 packets per second. As soon as
the traffic gets heavier, e.g. 100 packets per second, the card stops
capturing *all* VHT packets within a second from the moment the traffic volume
got higher. The interesting part is that it doesn't stop capturing altogether:
it keeps on capturing 802.11n HT and legacy 802.11a packets, it just
completely ignores 802.11ac VHT packets. Is there any way to fix this problem
and ensure stable VHT capture?
^ permalink raw reply
* Re: regarding Linux Wifi driver
From: Rafał Miłecki @ 2013-10-18 12:49 UTC (permalink / raw)
To: Daniel Wrede; +Cc: linux-wireless@vger.kernel.org, sgruszka@redhat.com
In-Reply-To: <6F561AC697923E43A7559754DA2EE97C3201BFF0@ADM-EXMBX10D.adm.c.sdu.dk>
2013/10/18 Daniel Wrede <dawre12@student.sdu.dk>:
> I do have a question regarding the drivers on http://wireless.kernel.org/en/users/Drivers/iwlegacy
You're writing to generic Linux wireless ML, so please include main
info in the thread (driver name / wireless chipset).
> My kernel version is 3.8.0-19-generic. Which driver should I use for the WiFi Link 4965AGN? I am a little confused by the numbering.
You linked to the "iwlegacy" driver wiki page and this page lists
4965AGN chipset as supported. That's pretty obvious you need an
iwlegacy driver, isn't it?
--
Rafał
^ permalink raw reply
* pull-request: iwlwifi-fixes 2013-10-18
From: Johannes Berg @ 2013-10-18 14:12 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 1670 bytes --]
John,
Before you travel to Edinburgh, I hope to get in another pull request.
Or maybe when you are there? :-)
I have a few fixes for warnings/issues: one from Alex, fixing scan
timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
change from myself to try to recover when the device isn't processing
commands quickly.
Please let me know if there's any issue.
johannes
The following changes since commit 5a3e9f7f8c8768b5f7df81100c684e4cd00a6eb5:
iwlwifi: mvm: call ieee80211_scan_completed when needed (2013-10-02 11:25:50 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes.git for-john
for you to fetch changes up to f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d:
iwlwifi: dvm: don't override mac80211's queue setting (2013-10-18 16:03:14 +0200)
----------------------------------------------------------------
Alexander Bondar (1):
iwlwifi: mvm: fix scan request's suspend time parameter
Emmanuel Grumbach (1):
iwlwifi: dvm: don't override mac80211's queue setting
Johannes Berg (1):
iwlwifi: pcie: poke device when commands don't complete quickly
Stanislaw Gruszka (1):
iwlwifi: don't WARN on bad firmware state
drivers/net/wireless/iwlwifi/dvm/tx.c | 14 +++-----------
drivers/net/wireless/iwlwifi/iwl-trans.h | 22 +++++++++++-----------
drivers/net/wireless/iwlwifi/mvm/scan.c | 6 +++---
drivers/net/wireless/iwlwifi/pcie/tx.c | 31 ++++++++++++++++++++++++++-----
4 files changed, 43 insertions(+), 30 deletions(-)
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* pull-request: mac80211 2013-10-18
From: Johannes Berg @ 2013-10-18 14:14 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 1181 bytes --]
John,
I'm flushing out patches ... one more for mac80211.
This time I have two fixes for P2P (which requires not using CCK rates)
and a workaround for APs with broken WMM information.
Let me know if there's any problem.
johannes
The following changes since commit d86aa4f8ca58898ec6a94c0635da20b948171ed7:
mac80211: fix crash if bitrate calculation goes wrong (2013-10-14 09:47:08 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git for-john
for you to fetch changes up to 095d81cee742fc31e1218077ca6ca8f0df07c613:
mac80211: disable WMM with invalid parameters (2013-10-17 15:38:22 +0200)
----------------------------------------------------------------
Andrei Otcheretianski (2):
mac80211: fix honouring rate flags in low-rate transmit
mac80211: respect rate mask in TX
Johannes Berg (1):
mac80211: disable WMM with invalid parameters
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/mlme.c | 95 +++++++++++++++++++++++++++++++++++++++++-----
net/mac80211/rate.c | 15 ++++++--
3 files changed, 99 insertions(+), 12 deletions(-)
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* pull-request: iwlwifi-next 2013-10-18
From: Johannes Berg @ 2013-10-18 14:21 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 7373 bytes --]
John,
And for iwlwifi-next ... This is bigger. I guess -next stuff can wait
until after KS though. Also, I think there might be a merge conflict
hidden here, don't really remember.
For this round, I have a lot of changes:
* power management improvements
* BT coexistence improvements/updates
* new device support
* VHT support
* IBSS support (though due to a small bug it requires new firmware)
* various other fixes/improvements.
Sorry to concentrate it all into one pull request, I was holding for a
small bugfix that turned out to be much more difficult than I expected,
but also not needed yet (so this code has a known bug with -8 firmware,
but we'll fix it before the driver gets updated to use that firmware.)
Let me know if there's any problem.
johannes
The following changes since commit e25aa82a89db9e3b09d02b5481aa375c7712a10d:
rt2x00: rt2800lib: fix VGC adjustment for RT3572 and RT3593 (2013-10-10 13:53:07 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git for-john
for you to fetch changes up to 246dd9922e859768aa522daa6c1c601785e57e0c:
iwlwifi: mvm: fix operator precedence (2013-10-18 16:02:38 +0200)
----------------------------------------------------------------
Alexander Bondar (2):
iwlwifi: mvm: Adjust some power management constants
iwlwifi: mvm: Add device wide power command
Andrei Otcheretianski (1):
iwlwifi: mvm: Implement BT coex notifications
David Spinadel (4):
iwlwifi: mvm: implement NoA testing using testmode cmd
iwlwifi: mvm: add no_basic_ssid option
iwlwifi: mvm: support sched scan if supported by the fw
iwlwifi: mvm: fix operator precedence
Djalal Harouni (1):
iwlwifi: mvm: make debugfs write() operations write up to count bytes
Emmanuel Grumbach (20):
iwlwifi: mvm: use CTS to Self if firmware allows it
iwlwifi: pcie: clean RFKILL interrupt in AMPG
iwlwifi: mvm: don't sleep while allocating in atomic context
iwlwifi: mvm: new BT Coex API
iwlwifi: mvm: BT Coex - no need to send envelopes
iwlwifi: mvm: BT Coex - use data from firmware
iwlwifi: mvm: don't use reduced Tx power when not applicable
iwlwifi: mvm: BT Coex - adapt debugfs to new API
iwlwifi: mvm: BT Coex - Correctly enable and treat rssi events
iwlwifi: pcie: dump_stack upon timeout of SYNC cmd
iwlwifi: mvm: BT Coex - don't limit agg size in loose scheme
iwlwifi: mvm: BT Coex - set the proper LUT for single ant devices
iwlwifi: pcie: restart the driver when a command times out
iwlwifi: mvm: BT Coex - track bandwidth changes in HT
iwlwifi: mvm: BT Coex - tune SMPS parameters
iwlwifi: mvm: BT Coex - start AMPDU even when BT is active
iwlwifi: mvm: BT Coex - remove duplicate code in rate control
iwlwifi: mvm: BT Coex - update integration with rate control
iwlwifi: mvm: BT Coex - always set mandatory fields
iwlwifi: mvm: BT Coex - enable Tx power based on BT status
Eran Harary (2):
iwlwifi: Support 7265 devices
iwlwifi: support Signed firmware image and Dual CPUs
Eyal Shapira (5):
iwlwifi: mvm: remove rs FSM actions relevant only for 3 antennas
iwlwifi: mvm: fix switch from shared antenna in case of BT load
iwlwifi: mvm: update expected tpt tables for VHT
iwlwifi: mvm: support VHT in rs
iwlwifi: mvm: remove GF support in rs
Eytan Lifshitz (3):
iwlwifi: mvm: change the name of init_ucode_run flag
iwlwifi: mvm: prevent the NIC to be powered at driver load time.
iwlwifi: mvm: add support for NICs which have only 16 Tx queues.
Idan Kahlon (1):
iwlwifi: mvm: NVM - increase max section size
Jingoo Han (1):
wireless: iwlwifi: remove unnecessary pci_set_drvdata()
Johannes Berg (8):
iwlwifi: mvm: implement beacon filtering testmode command
iwlwifi: mvm: query firmware for non-QoS seqno
iwlwifi: mvm: give client MACs time to synchronise during restart
iwlwifi: mvm: fix locking in iwl_mvm_bt_rssi_event()
iwlwifi: mvm: implement new IPv6 offload API
Merge remote-tracking branch 'wireless-next/master' into HEAD
iwlwifi: mvm: keep connection to AP after WoWLAN
iwlwifi: mvm: add IBSS support
Luciano Coelho (1):
iwlwifi: mvm: fix fw_rx_stats debugfs entry
Max Stepanov (1):
iwlwifi: mvm: split ADD_STA and ADD_STA_KEY in firmware API
Oren Givon (1):
iwlwifi: mvm: debugfs: add an option to set antennas for scan command
drivers/net/wireless/iwlwifi/iwl-7000.c | 14 +
drivers/net/wireless/iwlwifi/iwl-config.h | 1 +
drivers/net/wireless/iwlwifi/iwl-csr.h | 32 +
drivers/net/wireless/iwlwifi/iwl-drv.c | 37 +
drivers/net/wireless/iwlwifi/iwl-fw-file.h | 4 +
drivers/net/wireless/iwlwifi/iwl-fw.h | 26 +-
drivers/net/wireless/iwlwifi/iwl-prph.h | 2 +
drivers/net/wireless/iwlwifi/mvm/bt-coex.c | 632 ++++++++++++-----
drivers/net/wireless/iwlwifi/mvm/constants.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/d3.c | 515 ++++++++++++--
drivers/net/wireless/iwlwifi/mvm/debugfs.c | 206 ++++--
drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h | 149 ++--
drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h | 69 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h | 11 +
drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 29 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h | 21 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 34 +-
drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h | 55 +-
drivers/net/wireless/iwlwifi/mvm/fw-api.h | 16 +-
drivers/net/wireless/iwlwifi/mvm/fw.c | 23 +-
drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 75 +-
drivers/net/wireless/iwlwifi/mvm/mac80211.c | 242 ++++++-
drivers/net/wireless/iwlwifi/mvm/mvm.h | 88 ++-
drivers/net/wireless/iwlwifi/mvm/nvm.c | 101 ++-
drivers/net/wireless/iwlwifi/mvm/ops.c | 60 +-
drivers/net/wireless/iwlwifi/mvm/power.c | 70 +-
drivers/net/wireless/iwlwifi/mvm/quota.c | 42 +-
drivers/net/wireless/iwlwifi/mvm/rs.c | 793 +++++++++++-----------
drivers/net/wireless/iwlwifi/mvm/rs.h | 154 +++--
drivers/net/wireless/iwlwifi/mvm/rx.c | 21 +
drivers/net/wireless/iwlwifi/mvm/scan.c | 456 ++++++++++++-
drivers/net/wireless/iwlwifi/mvm/sta.c | 206 ++++--
drivers/net/wireless/iwlwifi/mvm/sta.h | 4 -
drivers/net/wireless/iwlwifi/mvm/testmode.h | 95 +++
drivers/net/wireless/iwlwifi/mvm/time-event.c | 5 +-
drivers/net/wireless/iwlwifi/mvm/time-event.h | 4 +-
drivers/net/wireless/iwlwifi/mvm/tx.c | 49 +-
drivers/net/wireless/iwlwifi/mvm/utils.c | 2 +-
drivers/net/wireless/iwlwifi/pcie/drv.c | 8 +-
drivers/net/wireless/iwlwifi/pcie/trans.c | 127 +++-
drivers/net/wireless/iwlwifi/pcie/tx.c | 3 +
41 files changed, 3484 insertions(+), 1001 deletions(-)
create mode 100644 drivers/net/wireless/iwlwifi/mvm/testmode.h
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* pull-request: mac80211-next 2013-10-18
From: Johannes Berg @ 2013-10-18 14:31 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
[-- Attachment #1: Type: text/plain, Size: 4528 bytes --]
John,
Last one from me for today! :-)
In this round for mac80211-next I have:
* mesh channel switch support
* a CCM rewrite, using potential hardware offloads
* SMPS for AP mode
* RF-kill GPIO driver updates to make it usable as an ACPI driver
* regulatory improvements
* documentation fixes
* DFS for IBSS mode
* and a few small other improvements
Let me know if there's any problem.
johannes
The following changes since commit 7578d57520f51093f590d68e16965e2714e69747:
mac80211: implement STA CSA for drivers using channel contexts (2013-10-02 18:18:23 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git for-john
for you to fetch changes up to ed31c4f96ca164294fd9e20e9de868130d0d76de:
mac80211: process mesh channel switching using beacon (2013-10-18 16:27:04 +0200)
----------------------------------------------------------------
Ard Biesheuvel (1):
mac80211: port CCMP to cryptoapi's CCM driver
Chun-Yeow Yeoh (5):
mac80211: refactor the parsing of chan switch ie
mac80211: process the CSA frame for mesh accordingly
{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh
{nl,cfg,mac}80211: implement mesh channel switch userspace API
mac80211: process mesh channel switching using beacon
Emmanuel Grumbach (1):
mac80211: implement SMPS for AP
Felix Fietkau (1):
mac80211: add ieee80211_tx_prepare_skb() helper function
Heikki Krogerus (5):
net: rfkill: gpio: convert to resource managed allocation
net: rfkill: gpio: clean up clock handling
net: rfkill: gpio: spinlock-safe GPIO access
net: rfkill: gpio: prepare for DT and ACPI support
net: rfkill: gpio: add ACPI support
Johannes Berg (2):
mac80211: add missing IEEE80211_HW_SUPPORTS_HT_CCK_RATES docs
cfg80211: fix docbook references
Luis R. Rodriguez (5):
cfg80211: fix nl80211.h documentation for DFS enum states
cfg80211: rename regulatory_hint_11d() to regulatory_hint_country_ie()
cfg80211: enable regulatory hints for strict custom settings
cfg80211: simplify strict custom alpha2 regdomain check
cfg80211: export reg_initiator_name()
Marco Porsch (1):
mac80211: fixes for mesh powersave logic
Seth Forshee (1):
mac80211: Remove check for offchannel state when waking netdev queues
Simon Wunderlich (2):
nl80211/cfg80211: enable DFS for IBSS mode
mac80211: enable DFS for IBSS mode
Sunil Dutt (1):
cfg80211: pass station supported channel and oper class info
Documentation/DocBook/80211.tmpl | 4 +-
include/linux/ieee80211.h | 20 +++
include/net/cfg80211.h | 23 +++
include/net/mac80211.h | 18 +++
include/uapi/linux/nl80211.h | 27 +++-
net/mac80211/Kconfig | 12 ++
net/mac80211/aes_ccm.c | 169 ++++++++--------------
net/mac80211/aes_ccm.h | 14 +-
net/mac80211/cfg.c | 136 +++++++++++++++++-
net/mac80211/debug.h | 10 ++
net/mac80211/debugfs_netdev.c | 25 ++--
net/mac80211/ht.c | 41 ++++--
net/mac80211/ibss.c | 116 +++++++--------
net/mac80211/ieee80211_i.h | 50 +++++--
net/mac80211/iface.c | 2 +
net/mac80211/key.h | 2 +-
net/mac80211/mesh.c | 302 ++++++++++++++++++++++++++++++++++++++-
net/mac80211/mesh_plink.c | 3 +-
net/mac80211/mesh_ps.c | 33 +++--
net/mac80211/mlme.c | 34 +++--
net/mac80211/rx.c | 5 +-
net/mac80211/spectmgmt.c | 33 +++--
net/mac80211/sta_info.c | 72 ++++++++++
net/mac80211/sta_info.h | 5 +
net/mac80211/status.c | 31 ++--
net/mac80211/tx.c | 45 ++++++
net/mac80211/util.c | 124 +++++++++++++++-
net/mac80211/wpa.c | 44 +++---
net/rfkill/Kconfig | 2 +-
net/rfkill/rfkill-gpio.c | 211 +++++++++++++--------------
net/wireless/chan.c | 3 +-
net/wireless/ibss.c | 24 +++-
net/wireless/nl80211.c | 58 +++++++-
net/wireless/reg.c | 39 +++--
net/wireless/reg.h | 4 +-
net/wireless/sme.c | 4 +-
net/wireless/util.c | 14 +-
37 files changed, 1300 insertions(+), 459 deletions(-)
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Alan Stern @ 2013-10-18 14:49 UTC (permalink / raw)
To: Yannik Völker; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <526020B6.7080601@yahoo.de>
Yannik, you should always use Reply-To-All so that your messages get
sent to the mailing list and not just to me.
On Thu, 17 Oct 2013, Yannik Völker wrote:
> Am 07.08.2013 19:34, schrieb Alan Stern:
> > Please post two usbmon traces, one showing the failure on your
> > current system and the other showing the adapter running correctly
> > under a 32-bit kernel. Instructions for usbmon are in the kernel
> > source file Documentation/usb/usbmon.txt.
> I never got it to work under a 32-bit kernel, i was just able to utilize
> a windows32 driver using ndiswrapper.
>
> Now i got it to "work". I randomly found out that the ar5523 driver
> actually works when you load it after you unload ndiswrapper so the
> following steps make it work:
> 1. modprobe ndiswrapper
> 2. plug in device
> 3. connect to wlan using ndiswrapper and disconnect again (might be
> optional)
> 4. modprobe -r ndiswrapper
> 5. modprobe ar5523
> 6. connect to wlan
> log for that is attatched as wlanthennative2.log
>
> This works but is unreliable and sometimes the connection breaks down with
>
> Oct 17 19:26:46 yannik-desktop wpa_supplicant[2153]: wlan0:
> CTRL-EVENT-DISCONNECTED bssid=01:23:45:67:89:ab reason=3
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005591] usb 3-14:
> ar5523_data_rx_cb: USB err: -71
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005703] usb 3-14: RX USB
> error -71.
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005718] usb 3-14:
> ar5523_data_rx_cb: USB err: -71
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005779] usb 3-14: RX USB
> error -71.
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005788] usb 3-14:
> ar5523_data_rx_cb: USB err: -71
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005846] usb 3-14: USB
> disconnect, device number 7
> Oct 17 19:26:46 yannik-desktop kernel: [ 633.006080] wlan0:
> deauthenticating from 01:23:45:67:89:ab by local choice (reason=3)
>
> unloading ar5523 and then refollowing the steps beginning with step 3
> usually makes it work again
>
>
> directload.log contains what happens when you just load ar5523 after
> the device was plugged in.
>
> plug_ndis.log contains what sometimes happens when i have loaded and
> unloaded the modules some times and then try to load ndiswrapper.
>
> pluginout.log contains syslog for plugging the device in and out.
>
> Do you still need the usbmon traces?
In fact, I'm not the best person to work on this, since I know nothing
about the ar5523. Problems with a particular driver should be brought
to the attention of the driver's maintainer (CC'ed). Maybe he can
help.
It might be a good idea to post two usbmon traces: One showing what
happens during steps 1-3, and another showing what happens if you
modprobe ar5523 without loading ndiswrapper first.
Alan Stern
^ permalink raw reply
* Re: pull-request: mac80211-next 2013-10-18
From: Johannes Berg @ 2013-10-18 15:01 UTC (permalink / raw)
To: John Linville; +Cc: linux-wireless
In-Reply-To: <1382106708.14393.15.camel@jlt4.sipsolutions.net>
On Fri, 2013-10-18 at 16:31 +0200, Johannes Berg wrote:
> John,
>
> Last one from me for today! :-)
>
> In this round for mac80211-next I have:
> * mesh channel switch support
Gah! evidently this is broken for !mesh.
johannes
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Oleksij Rempel @ 2013-10-18 15:07 UTC (permalink / raw)
To: Alan Stern, Yannik Völker; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <Pine.LNX.4.44L0.1310181041080.1164-100000@iolanthe.rowland.org>
Am 18.10.2013 16:49, schrieb Alan Stern:
> Yannik, you should always use Reply-To-All so that your messages get
> sent to the mailing list and not just to me.
>
> On Thu, 17 Oct 2013, Yannik Völker wrote:
>
>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>> Please post two usbmon traces, one showing the failure on your
>>> current system and the other showing the adapter running correctly
>>> under a 32-bit kernel. Instructions for usbmon are in the kernel
>>> source file Documentation/usb/usbmon.txt.
>> I never got it to work under a 32-bit kernel, i was just able to utilize
>> a windows32 driver using ndiswrapper.
>>
>> Now i got it to "work". I randomly found out that the ar5523 driver
>> actually works when you load it after you unload ndiswrapper so the
>> following steps make it work:
>> 1. modprobe ndiswrapper
>> 2. plug in device
>> 3. connect to wlan using ndiswrapper and disconnect again (might be
>> optional)
>> 4. modprobe -r ndiswrapper
>> 5. modprobe ar5523
>> 6. connect to wlan
>> log for that is attatched as wlanthennative2.log
It sounds like linux driver didn't recognised usb id and didn't uploaded
firmware, or there was no firmware to upload.
>>
>> This works but is unreliable and sometimes the connection breaks down with
>>
>> Oct 17 19:26:46 yannik-desktop wpa_supplicant[2153]: wlan0:
>> CTRL-EVENT-DISCONNECTED bssid=01:23:45:67:89:ab reason=3
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005591] usb 3-14:
>> ar5523_data_rx_cb: USB err: -71
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005703] usb 3-14: RX USB
>> error -71.
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005718] usb 3-14:
>> ar5523_data_rx_cb: USB err: -71
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005779] usb 3-14: RX USB
>> error -71.
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005788] usb 3-14:
>> ar5523_data_rx_cb: USB err: -71
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.005846] usb 3-14: USB
>> disconnect, device number 7
>> Oct 17 19:26:46 yannik-desktop kernel: [ 633.006080] wlan0:
>> deauthenticating from 01:23:45:67:89:ab by local choice (reason=3)
>>
>> unloading ar5523 and then refollowing the steps beginning with step 3
>> usually makes it work again
>>
thas is probably other issue. Let's start with thirst issue.
>> directload.log contains what happens when you just load ar5523 after
>> the device was plugged in.
>>
>> plug_ndis.log contains what sometimes happens when i have loaded and
>> unloaded the modules some times and then try to load ndiswrapper.
>>
>> pluginout.log contains syslog for plugging the device in and out.
>>
>> Do you still need the usbmon traces?
>
> In fact, I'm not the best person to work on this, since I know nothing
> about the ar5523. Problems with a particular driver should be brought
> to the attention of the driver's maintainer (CC'ed). Maybe he can
> help.
>
> It might be a good idea to post two usbmon traces: One showing what
> happens during steps 1-3, and another showing what happens if you
> modprobe ar5523 without loading ndiswrapper first.
>
--
Regards,
Oleksij
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Yannik Völker @ 2013-10-18 15:38 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <52614E9B.6040400@rempel-privat.de>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 18.10.2013 17:07, schrieb Oleksij Rempel:
> Am 18.10.2013 16:49, schrieb Alan Stern:
>> Yannik, you should always use Reply-To-All so that your messages
>> get sent to the mailing list and not just to me.
>>
>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>
>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>> Please post two usbmon traces, one showing the failure on
>>>> your current system and the other showing the adapter running
>>>> correctly under a 32-bit kernel. Instructions for usbmon are
>>>> in the kernel source file Documentation/usb/usbmon.txt.
>>> I never got it to work under a 32-bit kernel, i was just able
>>> to utilize a windows32 driver using ndiswrapper.
>>>
>>> Now i got it to "work". I randomly found out that the ar5523
>>> driver actually works when you load it after you unload
>>> ndiswrapper so the following steps make it work: 1. modprobe
>>> ndiswrapper 2. plug in device 3. connect to wlan using
>>> ndiswrapper and disconnect again (might be optional) 4.
>>> modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to wlan
>>> log for that is attatched as wlanthennative2.log
>
>
> It sounds like linux driver didn't recognised usb id and didn't
> uploaded firmware, or there was no firmware to upload.
there is firmware (/lib/firmware/ar5523.bin exists) but it does not
even get touched (i renamed the file and the error did not change at all)
> thas is probably other issue. Let's start with thirst issue.
Ok, instructions?
- --
Yannik Völker
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=y5hR
-----END PGP SIGNATURE-----
^ permalink raw reply
* Re: [RTL8723AE] Driver problems
From: Larry Finger @ 2013-10-18 15:40 UTC (permalink / raw)
To: André Martins, linux-wireless
In-Reply-To: <BLU0-SMTP28669C5469915F5D8D155AF89060@phx.gbl>
On 10/17/2013 07:55 PM, André Martins wrote:
> Hi!
> This is a copy I've sent to Larry Finger and his bot told me to sent to this
> e-mail address instead.
> Basically I've bought a computer with the 8723ae card and unfortunately the
> wireless connection is really bad. Although I'm a last year student on MSc in
> computers and telematics engineering I don't have any skills what so ever on
> kernel's source code. Thus, I want to ask you if you could help me out and tell
> me where to begin to fix this and create a great rtl8723ae driver for Linux. I
> could help you with the tests what whatever I could. The main problem with this
> card is the connection on my university, it's always dropping and impossible to
> have a stable connection. On my house I'm a few meters way of my AP and the link
> quality is either on 38/70 or 70/70.
> Since you take the time to read this e-mail I thank you already.
André,
I am sure you understand why I do not answer requests for debugging from E-mail
that is sent to me alone.
Does the card work at your house? You need to be as clear as possible in what
you write.
What are the details at the University? How far are you from the AP there? What
kind of encryption is used (WPA, WPA2, etc.)? How much interference is there on
the channel used? Posting the output of 'sudo /usr/sbin/iw wlan0 scan' will
answer that.
For debugging, please try the following commands:
sudo /sbin/modprobe -rv rtl8187ae
sudo /sbin/modprobe -v rtl8723ae ips=0
Does that help?
When the disconnects happen, what is the indication in the output of dmesg?
Finally, we need to check your firmware. The md5sum values for the fw on my
system are
ce50dfe07dbb1bfe9e14bdb315a4b28a /lib/firmware/rtlwifi/rtl8723fw_B.bin
69ccaffbe94cc0ef1b89c25290e19b2e /lib/firmware/rtlwifi/rtl8723fw.bin
From the dmesg output, which one is being used on your system?
Larry
^ permalink raw reply
* Active scanning on DFS channels
From: Lorenzo Bianconi @ 2013-10-18 15:53 UTC (permalink / raw)
To: linux-wireless; +Cc: Johannes Berg, Simon Wunderlich
Hi all,
According to regdb.txt, DFS channels are not marked with passive scan flag:
country US: DFS-FCC
(2402 - 2472 @ 40), (3, 27)
(5170 - 5250 @ 80), (3, 17)
(5250 - 5330 @ 80), (3, 20), DFS
(5490 - 5600 @ 80), (3, 20), DFS
(5650 - 5710 @ 40), (3, 20), DFS
(5735 - 5835 @ 80), (3, 30)
Therefore STA device will perform active scanning on DFS channels even
if the channel is not CAC checked and available yet. Should we perform
passive scan on radar channel setting new state to SCAN_DECISION and
not to SCAN_SEND_PROBE in ieee80211_scan_state_set_channel()?
Regards,
Lorenzo
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Oleksij Rempel @ 2013-10-18 16:16 UTC (permalink / raw)
To: Yannik Völker; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <526155ED.1090007@yahoo.de>
Am 18.10.2013 17:38, schrieb Yannik Völker:
> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>> Yannik, you should always use Reply-To-All so that your messages
>>> get sent to the mailing list and not just to me.
>>>
>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>
>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>> Please post two usbmon traces, one showing the failure on
>>>>> your current system and the other showing the adapter running
>>>>> correctly under a 32-bit kernel. Instructions for usbmon are
>>>>> in the kernel source file Documentation/usb/usbmon.txt.
>>>> I never got it to work under a 32-bit kernel, i was just able
>>>> to utilize a windows32 driver using ndiswrapper.
>>>>
>>>> Now i got it to "work". I randomly found out that the ar5523
>>>> driver actually works when you load it after you unload
>>>> ndiswrapper so the following steps make it work: 1. modprobe
>>>> ndiswrapper 2. plug in device 3. connect to wlan using
>>>> ndiswrapper and disconnect again (might be optional) 4.
>>>> modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to wlan
>>>> log for that is attatched as wlanthennative2.log
>
>
>> It sounds like linux driver didn't recognised usb id and didn't
>> uploaded firmware, or there was no firmware to upload.
> there is firmware (/lib/firmware/ar5523.bin exists) but it does not
> even get touched (i renamed the file and the error did not change at all)
find first usbid of your adapter (it will be changed after firmware
upload). And try to force driver to use this id:
modprobe -v ar5523
echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
instead of "07d1 3a0d" use your id.
Besidy, what kernel version are you using? May be it is too old..
--
Regards,
Oleksij
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Yannik Völker @ 2013-10-18 16:33 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <52615EFA.80902@rempel-privat.de>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am 18.10.2013 18:16, schrieb Oleksij Rempel:
> Am 18.10.2013 17:38, schrieb Yannik Völker:
>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>> Yannik, you should always use Reply-To-All so that your
>>>> messages get sent to the mailing list and not just to me.
>>>>
>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>>
>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>> Please post two usbmon traces, one showing the failure
>>>>>> on your current system and the other showing the adapter
>>>>>> running correctly under a 32-bit kernel. Instructions
>>>>>> for usbmon are in the kernel source file
>>>>>> Documentation/usb/usbmon.txt.
>>>>> I never got it to work under a 32-bit kernel, i was just
>>>>> able to utilize a windows32 driver using ndiswrapper.
>>>>>
>>>>> Now i got it to "work". I randomly found out that the
>>>>> ar5523 driver actually works when you load it after you
>>>>> unload ndiswrapper so the following steps make it work: 1.
>>>>> modprobe ndiswrapper 2. plug in device 3. connect to wlan
>>>>> using ndiswrapper and disconnect again (might be optional)
>>>>> 4. modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to
>>>>> wlan log for that is attatched as wlanthennative2.log
>>
>>
>>> It sounds like linux driver didn't recognised usb id and
>>> didn't uploaded firmware, or there was no firmware to upload.
>> there is firmware (/lib/firmware/ar5523.bin exists) but it does
>> not even get touched (i renamed the file and the error did not
>> change at all)
>
> find first usbid of your adapter (it will be changed after
> firmware upload). And try to force driver to use this id: modprobe
> -v ar5523 echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
>
> instead of "07d1 3a0d" use your id.
>
# lsusb
…
Bus 003 Device 011: ID 129b:160c CyberTAN Technology Siemens
S30853-S1038-R351 802.11g Wireless Adapter [Atheros AR5523]
…
# modprobe ar5523
# echo 129b 160c > /sys/bus/usb/drivers/ar5523/new_id
<plugging device in>
syslog:
Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
registered new interface driver ar5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.036912] usb 3-14: new
high-speed USB device number 12 using xhci_hcd
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.053995] usb 3-14: New
USB device found, idVendor=129b, idProduct=160c
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054005] usb 3-14: New
USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054010] usb 3-14:
Product: AR5523
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
Manufacturer: Atheros Communications Inc
Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054019] usb 3-14:
SerialNumber: 1.0
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb 3-14:
timeout waiting for command 01 reply
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052323] usb 3-14: could
not initialize adapter
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052359] usb 3-14: RX USB
error -2.
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052378] usb 3-14: error
- -1 when submitting rx urb
Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052504] ar5523: probe of
3-14:1.0 failed with error -110
> Besidy, what kernel version are you using? May be it is too old..
>
3.11.0-12-generic
it is my understanding that the ar5523 driver was included from 3.8 on.
- --
Yannik Völker
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=pzyI
-----END PGP SIGNATURE-----
^ permalink raw reply
* Re: ar5523 Gigaset USB Adapter 108 issue
From: Oleksij Rempel @ 2013-10-18 17:16 UTC (permalink / raw)
To: Yannik Völker; +Cc: Pontus Fuchs, linux-wireless
In-Reply-To: <526162ED.8030901@yahoo.de>
[-- Attachment #1: Type: text/plain, Size: 3590 bytes --]
Am 18.10.2013 18:33, schrieb Yannik Völker:
> Am 18.10.2013 18:16, schrieb Oleksij Rempel:
>> Am 18.10.2013 17:38, schrieb Yannik Völker:
>>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>>> Yannik, you should always use Reply-To-All so that your
>>>>> messages get sent to the mailing list and not just to me.
>>>>>
>>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>>>
>>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>>> Please post two usbmon traces, one showing the failure
>>>>>>> on your current system and the other showing the adapter
>>>>>>> running correctly under a 32-bit kernel. Instructions
>>>>>>> for usbmon are in the kernel source file
>>>>>>> Documentation/usb/usbmon.txt.
>>>>>> I never got it to work under a 32-bit kernel, i was just
>>>>>> able to utilize a windows32 driver using ndiswrapper.
>>>>>>
>>>>>> Now i got it to "work". I randomly found out that the
>>>>>> ar5523 driver actually works when you load it after you
>>>>>> unload ndiswrapper so the following steps make it work: 1.
>>>>>> modprobe ndiswrapper 2. plug in device 3. connect to wlan
>>>>>> using ndiswrapper and disconnect again (might be optional)
>>>>>> 4. modprobe -r ndiswrapper 5. modprobe ar5523 6. connect to
>>>>>> wlan log for that is attatched as wlanthennative2.log
>>>
>>>
>>>> It sounds like linux driver didn't recognised usb id and
>>>> didn't uploaded firmware, or there was no firmware to upload.
>>> there is firmware (/lib/firmware/ar5523.bin exists) but it does
>>> not even get touched (i renamed the file and the error did not
>>> change at all)
>
>> find first usbid of your adapter (it will be changed after
>> firmware upload). And try to force driver to use this id: modprobe
>> -v ar5523 echo 07d1 3a0d > /sys/bus/usb/drivers/ar5523/new_id
>
>> instead of "07d1 3a0d" use your id.
>
>
> # lsusb
> …
> Bus 003 Device 011: ID 129b:160c CyberTAN Technology Siemens
> S30853-S1038-R351 802.11g Wireless Adapter [Atheros AR5523]
> …
>
> # modprobe ar5523
> # echo 129b 160c > /sys/bus/usb/drivers/ar5523/new_id
> <plugging device in>
> syslog:
> Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
> registered new interface driver ar5523
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.036912] usb 3-14: new
> high-speed USB device number 12 using xhci_hcd
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.053995] usb 3-14: New
> USB device found, idVendor=129b, idProduct=160c
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054005] usb 3-14: New
> USB device strings: Mfr=1, Product=2, SerialNumber=3
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054010] usb 3-14:
> Product: AR5523
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
> Manufacturer: Atheros Communications Inc
> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054019] usb 3-14:
> SerialNumber: 1.0
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb 3-14:
> timeout waiting for command 01 reply
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052323] usb 3-14: could
> not initialize adapter
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052359] usb 3-14: RX USB
> error -2.
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052378] usb 3-14: error
> -1 when submitting rx urb
> Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052504] ar5523: probe of
> 3-14:1.0 failed with error -110
>
>> Besidy, what kernel version are you using? May be it is too old..
>
> 3.11.0-12-generic
> it is my understanding that the ar5523 driver was included from 3.8 on.
please test attached patch.
--
Regards,
Oleksij
[-- Attachment #2: ar5523.diff --]
[-- Type: text/x-patch, Size: 760 bytes --]
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 17d7fec..57fc06e 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1764,7 +1764,7 @@ static struct usb_device_id ar5523_id_table[] = {
AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */
AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */
AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */
- AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108
+ AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108
(CyberTAN Technology) */
AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */
AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */
^ permalink raw reply related
* [cfg80211 / iwlwifi] setting wireless regulatory domain doesn't work.
From: Sander Eikelenboom @ 2013-10-18 17:43 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: Grumbach, Emmanuel, ilw@linux.intel.com, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 794 bytes --]
Hi,
I'm trying to change the regulatory domain for my wireless adapter:
Intel Corporation Centrino Advanced-N 6235
But it fails to change from "world" to anything else (say "US")
I enabled debug options used iwlwifi.debug=0x00043FFF for boot and added some printk's which i think should be triggered .. but they are not.
It seems in function "reg_process_pending_hints" the processing is deferred,
but from the code i don't see how it would ever be triggered to complete ?
Hope some can give some hints to what could be going on ...
Attached:
- full syslog from boot till "iw set reg US", which is done at "Oct 18 21:26:09"
- patch.diff with the added debug printk's against 3.12-rc5 (it also contains the patch that was needed to suppress another warning in the iwlwifi driver.
--
Sander
[-- Attachment #2: patch.diff --]
[-- Type: application/octet-stream, Size: 5512 bytes --]
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index da442b8..1fef524 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -433,27 +433,19 @@ int iwlagn_tx_skb(struct iwl_priv *priv,
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
+ txq_id = info->hw_queue;
+
if (is_agg)
txq_id = priv->tid_data[sta_id][tid].agg.txq_id;
else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/*
- * Send this frame after DTIM -- there's a special queue
- * reserved for this for contexts that support AP mode.
- */
- txq_id = ctx->mcast_queue;
-
- /*
* The microcode will clear the more data
* bit in the last frame it transmits.
*/
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
- } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
- txq_id = IWL_AUX_QUEUE;
- else
- txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)];
+ }
- WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue);
WARN_ON_ONCE(is_agg &&
priv->queue_to_mac80211[txq_id] != info->hw_queue);
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 9833cdf..e081c03 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -217,12 +217,16 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
mvm->fw->ucode_capa.max_probe_length - 24 - 34;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
- if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)
+ if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels){
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&mvm->nvm_data->bands[IEEE80211_BAND_2GHZ];
- if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels)
+ IWL_ERR(mvm, "SEIK AP create the 802.11 header with 2.4\n");
+ }
+ if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) {
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
+ IWL_ERR(mvm, "SEIK AP create the 802.11 header with 5\n");
+ }
hw->wiphy->hw_version = mvm->trans->hw_id;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index de06d5d..4d5dad7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -58,6 +58,8 @@
#include "regdb.h"
#include "nl80211.h"
+#define CONFIG_CFG80211_REG_DEBUG
+
#ifdef CONFIG_CFG80211_REG_DEBUG
#define REG_DBG_PRINT(format, args...) \
printk(KERN_DEBUG pr_fmt(format), ##args)
@@ -758,6 +760,8 @@ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
}
EXPORT_SYMBOL(freq_reg_info);
+#define CONFIG_CFG80211_REG_DEBUG
+
#ifdef CONFIG_CFG80211_REG_DEBUG
static const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
{
@@ -976,8 +980,8 @@ static bool ignore_reg_update(struct wiphy *wiphy,
if (initiator == NL80211_REGDOM_SET_BY_CORE &&
wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
- REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain\n",
- reg_initiator_name(initiator));
+ REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain %lx\n",
+ reg_initiator_name(initiator), wiphy->flags);
return true;
}
@@ -993,8 +997,14 @@ static bool ignore_reg_update(struct wiphy *wiphy,
return true;
}
- if (reg_request_cell_base(lr))
+ if (reg_request_cell_base(lr)){
+ REG_DBG_PRINT("Ignoring regulatory request ?? %s: %i\n",
+ reg_initiator_name(initiator), reg_dev_ignore_cell_hint(wiphy));
+
return reg_dev_ignore_cell_hint(wiphy);
+ }
+ REG_DBG_PRINT("NOT Ignoring regulatory request %s \n",
+ reg_initiator_name(initiator));
return false;
}
@@ -1516,6 +1526,7 @@ static void reg_process_hint(struct regulatory_request *reg_request,
enum nl80211_reg_initiator reg_initiator)
{
struct wiphy *wiphy = NULL;
+ REG_DBG_PRINT("SEIK reg_process_hint begin\n");
if (WARN_ON(!reg_request->alpha2))
return;
@@ -1531,14 +1542,19 @@ static void reg_process_hint(struct regulatory_request *reg_request,
switch (__regulatory_hint(wiphy, reg_request)) {
case REG_REQ_ALREADY_SET:
/* This is required so that the orig_* parameters are saved */
- if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+ if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY){
wiphy_update_regulatory(wiphy, reg_initiator);
+ REG_DBG_PRINT("SEIK reg_process_hint already set\n");
+ }
break;
default:
- if (reg_initiator == NL80211_REGDOM_SET_BY_USER)
+ if (reg_initiator == NL80211_REGDOM_SET_BY_USER){
schedule_delayed_work(®_timeout,
msecs_to_jiffies(3142));
+ REG_DBG_PRINT("SEIK reg_process_hint default\n");
+ }
break;
+
}
}
@@ -1558,6 +1574,7 @@ static void reg_process_pending_hints(void)
REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n");
return;
}
+ REG_DBG_PRINT("SEIK regulatory request...at 1\n");
spin_lock(®_requests_lock);
@@ -1572,8 +1589,11 @@ static void reg_process_pending_hints(void)
list_del_init(®_request->list);
spin_unlock(®_requests_lock);
+ REG_DBG_PRINT("SEIK regulatory request...at 2\n");
reg_process_hint(reg_request, reg_request->initiator);
+ REG_DBG_PRINT("SEIK regulatory request...at 3\n");
+
}
/* Processes beacon hints -- this has nothing to do with country IEs */
[-- Attachment #3: syslog --]
[-- Type: application/octet-stream, Size: 152381 bytes --]
Oct 18 20:38:54 creabox kernel: imklog 5.8.11, log source = /proc/kmsg started.
Oct 18 20:38:54 creabox rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2509" x-info="http://www.rsyslog.com"] start
Oct 18 20:38:54 creabox kernel: [ 0.018361] dmar: DRHD base: 0x000000fed90000 flags: 0x0
Oct 18 20:38:54 creabox kernel: [ 0.018436] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
Oct 18 20:38:54 creabox kernel: [ 0.018521] dmar: DRHD base: 0x000000fed91000 flags: 0x1
Oct 18 20:38:54 creabox kernel: [ 0.018593] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
Oct 18 20:38:54 creabox kernel: [ 0.018679] dmar: RMRR base: 0x000000dbe07000 end: 0x000000dbe13fff
Oct 18 20:38:54 creabox kernel: [ 0.018748] dmar: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
Oct 18 20:38:54 creabox kernel: [ 0.018889] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
Oct 18 20:38:54 creabox kernel: [ 0.018958] HPET id 0 under DRHD base 0xfed91000
Oct 18 20:38:54 creabox kernel: [ 0.019225] Enabled IRQ remapping in x2apic mode
Oct 18 20:38:54 creabox kernel: [ 0.019293] Enabling x2apic
Oct 18 20:38:54 creabox kernel: [ 0.019357] Enabled x2apic
Oct 18 20:38:54 creabox kernel: [ 0.019434] Switched APIC routing to cluster x2apic.
Oct 18 20:38:54 creabox kernel: [ 0.019964] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 18 20:38:54 creabox kernel: [ 0.059695] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
Oct 18 20:38:54 creabox kernel: [ 0.059927] TSC deadline timer enabled
Oct 18 20:38:54 creabox kernel: [ 0.060000] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
Oct 18 20:38:54 creabox kernel: [ 0.060313] ... version: 3
Oct 18 20:38:54 creabox kernel: [ 0.060379] ... bit width: 48
Oct 18 20:38:54 creabox kernel: [ 0.060444] ... generic registers: 4
Oct 18 20:38:54 creabox kernel: [ 0.060508] ... value mask: 0000ffffffffffff
Oct 18 20:38:54 creabox kernel: [ 0.060576] ... max period: 0000ffffffffffff
Oct 18 20:38:54 creabox kernel: [ 0.060642] ... fixed-purpose events: 3
Oct 18 20:38:54 creabox kernel: [ 0.060707] ... event mask: 000000070000000f
Oct 18 20:38:54 creabox kernel: [ 0.074786] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Oct 18 20:38:54 creabox kernel: [ 0.061090] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
Oct 18 20:38:54 creabox kernel: [ 0.102455] Brought up 4 CPUs
Oct 18 20:38:54 creabox kernel: [ 0.102523] smpboot: Total of 4 processors activated (18358.08 BogoMIPS)
Oct 18 20:38:54 creabox kernel: [ 0.106859] devtmpfs: initialized
Oct 18 20:38:54 creabox kernel: [ 0.107820] xor: automatically using best checksumming function:
Oct 18 20:38:54 creabox kernel: [ 0.146580] avx : 12154.000 MB/sec
Oct 18 20:38:54 creabox kernel: [ 0.146718] NET: Registered protocol family 16
Oct 18 20:38:54 creabox kernel: [ 0.147109] cpuidle: using governor ladder
Oct 18 20:38:54 creabox kernel: [ 0.147177] cpuidle: using governor menu
Oct 18 20:38:54 creabox kernel: [ 0.147459] ACPI: bus type PCI registered
Oct 18 20:38:54 creabox kernel: [ 0.147526] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 18 20:38:54 creabox kernel: [ 0.147649] dca service started, version 1.12.1
Oct 18 20:38:54 creabox kernel: [ 0.147739] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Oct 18 20:38:54 creabox kernel: [ 0.147828] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Oct 18 20:38:54 creabox kernel: [ 0.152548] PCI: Using configuration type 1 for base access
Oct 18 20:38:54 creabox kernel: [ 0.156142] bio: create slab <bio-0> at 0
Oct 18 20:38:54 creabox kernel: [ 0.222583] raid6: sse2x1 4583 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.290571] raid6: sse2x2 5735 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.358561] raid6: sse2x4 6506 MB/s
Oct 18 20:38:54 creabox kernel: [ 0.358630] raid6: using algorithm sse2x4 (6506 MB/s)
Oct 18 20:38:54 creabox kernel: [ 0.358696] raid6: using ssse3x2 recovery algorithm
Oct 18 20:38:54 creabox kernel: [ 0.358813] ACPI: Added _OSI(Module Device)
Oct 18 20:38:54 creabox kernel: [ 0.358882] ACPI: Added _OSI(Processor Device)
Oct 18 20:38:54 creabox kernel: [ 0.358948] ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 18 20:38:54 creabox kernel: [ 0.359014] ACPI: Added _OSI(Processor Aggregator Device)
Oct 18 20:38:54 creabox kernel: [ 0.360898] ACPI: EC: Look up EC in DSDT
Oct 18 20:38:54 creabox kernel: [ 0.362948] ACPI: Executed 1 blocks of module-level executable AML code
Oct 18 20:38:54 creabox kernel: [ 0.375173] ACPI: SSDT 00000000dbe1d018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.375822] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.375979] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.390913] ACPI: SSDT 00000000dbe1ea98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.391609] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.391767] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.402713] ACPI: SSDT 00000000dbe1fc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.403346] ACPI: Dynamic OEM Table Load:
Oct 18 20:38:54 creabox kernel: [ 0.403502] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
Oct 18 20:38:54 creabox kernel: [ 0.415421] ACPI: Interpreter enabled
Oct 18 20:38:54 creabox kernel: [ 0.415494] ACPI: (supports S0 S5)
Oct 18 20:38:54 creabox kernel: [ 0.415562] ACPI: Using IOAPIC for interrupt routing
Oct 18 20:38:54 creabox kernel: [ 0.415666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 18 20:38:54 creabox kernel: [ 0.415974] ACPI: No dock devices found.
Oct 18 20:38:54 creabox kernel: [ 0.426273] ACPI: Power Resource [FN00] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426463] ACPI: Power Resource [FN01] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426658] ACPI: Power Resource [FN02] (off)
Oct 18 20:38:54 creabox kernel: [ 0.426840] ACPI: Power Resource [FN03] (off)
Oct 18 20:38:54 creabox kernel: [ 0.427026] ACPI: Power Resource [FN04] (off)
Oct 18 20:38:54 creabox kernel: [ 0.427944] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Oct 18 20:38:54 creabox kernel: [ 0.428388] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
Oct 18 20:38:54 creabox kernel: [ 0.429133] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
Oct 18 20:38:54 creabox kernel: [ 0.429903] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430225] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430298] ACPI: \_SB_.PCI0.ITPM: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430367] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
Oct 18 20:38:54 creabox kernel: [ 0.430435] PCI host bridge to bus 0000:00
Oct 18 20:38:54 creabox kernel: [ 0.430501] pci_bus 0000:00: root bus resource [bus 00-3e]
Oct 18 20:38:54 creabox kernel: [ 0.430569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Oct 18 20:38:54 creabox kernel: [ 0.430644] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Oct 18 20:38:54 creabox kernel: [ 0.430714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Oct 18 20:38:54 creabox kernel: [ 0.430786] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Oct 18 20:38:54 creabox kernel: [ 0.430854] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Oct 18 20:38:54 creabox kernel: [ 0.430925] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Oct 18 20:38:54 creabox kernel: [ 0.430995] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Oct 18 20:38:54 creabox kernel: [ 0.431064] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Oct 18 20:38:54 creabox kernel: [ 0.431134] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Oct 18 20:38:54 creabox kernel: [ 0.431202] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
Oct 18 20:38:54 creabox kernel: [ 0.431281] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
Oct 18 20:38:54 creabox kernel: [ 0.431485] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
Oct 18 20:38:54 creabox kernel: [ 0.431569] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.431649] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Oct 18 20:38:54 creabox kernel: [ 0.431739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
Oct 18 20:38:54 creabox kernel: [ 0.431960] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
Oct 18 20:38:54 creabox kernel: [ 0.432055] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.432207] pci 0000:00:14.0: PME# supported from D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.432351] pci 0000:00:14.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.432478] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
Oct 18 20:38:54 creabox kernel: [ 0.432571] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.432729] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.432915] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
Oct 18 20:38:54 creabox kernel: [ 0.432999] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
Oct 18 20:38:54 creabox kernel: [ 0.433077] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff]
Oct 18 20:38:54 creabox kernel: [ 0.433345] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
Oct 18 20:38:54 creabox kernel: [ 0.433436] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
Oct 18 20:38:54 creabox kernel: [ 0.433512] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
Oct 18 20:38:54 creabox kernel: [ 0.433590] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
Oct 18 20:38:54 creabox kernel: [ 0.433729] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.433870] pci 0000:00:19.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.433992] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
Oct 18 20:38:54 creabox kernel: [ 0.434080] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
Oct 18 20:38:54 creabox kernel: [ 0.434250] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.434416] pci 0000:00:1a.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.434540] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
Oct 18 20:38:54 creabox kernel: [ 0.434628] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.434785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.434932] pci 0000:00:1b.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.435049] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
Oct 18 20:38:54 creabox kernel: [ 0.435249] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.435403] pci 0000:00:1c.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.435524] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
Oct 18 20:38:54 creabox kernel: [ 0.435723] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.435877] pci 0000:00:1c.2: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.436009] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
Oct 18 20:38:54 creabox kernel: [ 0.436100] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
Oct 18 20:38:54 creabox kernel: [ 0.436271] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.436430] pci 0000:00:1d.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.436549] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
Oct 18 20:38:54 creabox kernel: [ 0.436848] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
Oct 18 20:38:54 creabox kernel: [ 0.436938] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
Oct 18 20:38:54 creabox kernel: [ 0.437015] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
Oct 18 20:38:54 creabox kernel: [ 0.437090] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
Oct 18 20:38:54 creabox kernel: [ 0.437167] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
Oct 18 20:38:54 creabox kernel: [ 0.437243] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
Oct 18 20:38:54 creabox kernel: [ 0.437320] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
Oct 18 20:38:54 creabox kernel: [ 0.437443] pci 0000:00:1f.2: PME# supported from D3hot
Oct 18 20:38:54 creabox kernel: [ 0.437624] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
Oct 18 20:38:54 creabox kernel: [ 0.437713] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.437807] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
Oct 18 20:38:54 creabox kernel: [ 0.438101] pci 0000:00:1c.0: PCI bridge to [bus 01]
Oct 18 20:38:54 creabox kernel: [ 0.439894] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
Oct 18 20:38:54 creabox kernel: [ 0.440147] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
Oct 18 20:38:54 creabox kernel: [ 0.440943] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Oct 18 20:38:54 creabox kernel: [ 0.441173] pci 0000:02:00.0: System wakeup disabled by ACPI
Oct 18 20:38:54 creabox kernel: [ 0.447727] pci 0000:00:1c.2: PCI bridge to [bus 02]
Oct 18 20:38:54 creabox kernel: [ 0.447804] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.448569] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.449200] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 20:38:54 creabox kernel: [ 0.449932] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.450557] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.451178] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.451810] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 20:38:54 creabox kernel: [ 0.452537] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.453165] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Oct 18 20:38:54 creabox kernel: [ 0.454007] ACPI: Enabled 6 GPEs in block 00 to 3F
Oct 18 20:38:54 creabox kernel: [ 0.454167] ACPI: \_SB_.PCI0: notify handler is installed
Oct 18 20:38:54 creabox kernel: [ 0.454309] Found 1 acpi root devices
Oct 18 20:38:54 creabox kernel: [ 0.454485] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Oct 18 20:38:54 creabox kernel: [ 0.454572] vgaarb: loaded
Oct 18 20:38:54 creabox kernel: [ 0.454638] vgaarb: bridge control possible 0000:00:02.0
Oct 18 20:38:54 creabox kernel: [ 0.454834] SCSI subsystem initialized
Oct 18 20:38:54 creabox kernel: [ 0.454957] libata version 3.00 loaded.
Oct 18 20:38:54 creabox kernel: [ 0.455049] ACPI: bus type USB registered
Oct 18 20:38:54 creabox kernel: [ 0.455137] usbcore: registered new interface driver usbfs
Oct 18 20:38:54 creabox kernel: [ 0.455219] usbcore: registered new interface driver hub
Oct 18 20:38:54 creabox kernel: [ 0.455330] usbcore: registered new device driver usb
Oct 18 20:38:54 creabox kernel: [ 0.455424] pps_core: LinuxPPS API ver. 1 registered
Oct 18 20:38:54 creabox kernel: [ 0.455491] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 18 20:38:54 creabox kernel: [ 0.455578] PTP clock support registered
Oct 18 20:38:54 creabox kernel: [ 0.455687] wmi: Mapper loaded
Oct 18 20:38:54 creabox kernel: [ 0.455778] Advanced Linux Sound Architecture Driver Initialized.
Oct 18 20:38:54 creabox kernel: [ 0.455849] PCI: Using ACPI for IRQ routing
Oct 18 20:38:54 creabox kernel: [ 0.457781] PCI: pci_cache_line_size set to 64 bytes
Oct 18 20:38:54 creabox kernel: [ 0.457960] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
Oct 18 20:38:54 creabox kernel: [ 0.458032] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458100] e820: reserve RAM buffer [mem 0xdb9f1000-0xdbffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458168] e820: reserve RAM buffer [mem 0xdc20e000-0xdfffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458238] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458307] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
Oct 18 20:38:54 creabox kernel: [ 0.458565] cfg80211: SEIK regulatory request...at 1
Oct 18 20:38:54 creabox kernel: [ 0.458636] cfg80211: SEIK regulatory request...at 2
Oct 18 20:38:54 creabox kernel: [ 0.458702] cfg80211: SEIK reg_process_hint begin
Oct 18 20:38:54 creabox kernel: [ 0.458770] cfg80211: Calling CRDA to update world regulatory domain
Oct 18 20:38:54 creabox kernel: [ 0.458845] cfg80211: SEIK regulatory request...at 3
Oct 18 20:38:54 creabox kernel: [ 0.459204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Oct 18 20:38:54 creabox kernel: [ 0.459666] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Oct 18 20:38:54 creabox kernel: [ 0.461762] Switched to clocksource hpet
Oct 18 20:38:54 creabox kernel: [ 0.467410] FS-Cache: Loaded
Oct 18 20:38:54 creabox kernel: [ 0.467540] CacheFiles: Loaded
Oct 18 20:38:54 creabox kernel: [ 0.467621] pnp: PnP ACPI init
Oct 18 20:38:54 creabox kernel: [ 0.467696] ACPI: bus type PNP registered
Oct 18 20:38:54 creabox kernel: [ 0.467830] pnp 00:00: [dma 4]
Oct 18 20:38:54 creabox kernel: [ 0.467923] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468024] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468236] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
Oct 18 20:38:54 creabox kernel: [ 0.468362] system 00:03: [io 0x0680-0x069f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468433] system 00:03: [io 0x1000-0x100f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468502] system 00:03: [io 0xffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468570] system 00:03: [io 0xffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468640] system 00:03: [io 0x0400-0x0453] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.468711] system 00:03: [io 0x0458-0x047f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468781] system 00:03: [io 0x0500-0x057f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468850] system 00:03: [io 0x164e-0x164f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.468919] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469033] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469163] system 00:05: [io 0x0454-0x0457] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469234] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469491] system 00:06: [io 0x0a00-0x0a1f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469561] system 00:06: [io 0x0a30-0x0a3f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469632] system 00:06: [io 0x0a20-0x0a2f] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469701] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.469881] system 00:07: [io 0x04d0-0x04d1] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.469956] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470063] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470193] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
Oct 18 20:38:54 creabox kernel: [ 0.470593] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470667] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470737] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470807] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470877] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.470949] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471021] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.471091] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471162] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471232] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
Oct 18 20:38:54 creabox kernel: [ 0.471303] system 00:0a: [mem 0xdfa00000-0xdfa00fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471373] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 20:38:54 creabox kernel: [ 0.471714] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471788] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
Oct 18 20:38:54 creabox kernel: [ 0.471859] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 18 20:38:54 creabox kernel: [ 0.471957] pnp: PnP ACPI: found 12 devices
Oct 18 20:38:54 creabox kernel: [ 0.472024] ACPI: bus type PNP unregistered
Oct 18 20:38:54 creabox kernel: [ 0.479427] pci 0000:00:1c.0: PCI bridge to [bus 01]
Oct 18 20:38:54 creabox kernel: [ 0.479515] pci 0000:00:1c.2: PCI bridge to [bus 02]
Oct 18 20:38:54 creabox kernel: [ 0.479588] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.479670] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Oct 18 20:38:54 creabox kernel: [ 0.479740] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Oct 18 20:38:54 creabox kernel: [ 0.479806] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Oct 18 20:38:54 creabox kernel: [ 0.479877] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
Oct 18 20:38:54 creabox kernel: [ 0.479947] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
Oct 18 20:38:54 creabox kernel: [ 0.480017] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
Oct 18 20:38:54 creabox kernel: [ 0.480085] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
Oct 18 20:38:54 creabox kernel: [ 0.480155] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
Oct 18 20:38:54 creabox kernel: [ 0.480225] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
Oct 18 20:38:54 creabox kernel: [ 0.480295] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
Oct 18 20:38:54 creabox kernel: [ 0.480365] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
Oct 18 20:38:54 creabox kernel: [ 0.480509] NET: Registered protocol family 2
Oct 18 20:38:54 creabox kernel: [ 0.480893] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481244] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481492] TCP: Hash tables configured (established 65536 bind 65536)
Oct 18 20:38:54 creabox kernel: [ 0.481586] TCP: reno registered
Oct 18 20:38:54 creabox kernel: [ 0.481667] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481800] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.481969] NET: Registered protocol family 1
Oct 18 20:38:54 creabox kernel: [ 0.482048] pci 0000:00:02.0: Boot video device
Oct 18 20:38:54 creabox kernel: [ 0.521914] PCI: CLS 64 bytes, default 64
Oct 18 20:38:54 creabox kernel: [ 0.522028] Trying to unpack rootfs image as initramfs...
Oct 18 20:38:54 creabox kernel: [ 0.716431] Freeing initrd memory: 9280K (ffff880036dd0000 - ffff8800376e0000)
Oct 18 20:38:54 creabox kernel: [ 0.716528] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 18 20:38:54 creabox kernel: [ 0.716600] software IO TLB [mem 0xd79f1000-0xdb9f1000] (64MB) mapped at [ffff8800d79f1000-ffff8800db9f0fff]
Oct 18 20:38:54 creabox kernel: [ 0.717567] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717655] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717732] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717811] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 0.717927] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 18 20:38:54 creabox kernel: [ 0.725753] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Oct 18 20:38:54 creabox kernel: [ 0.728315] sha1_ssse3: Using AVX optimized SHA-1 implementation
Oct 18 20:38:54 creabox kernel: [ 0.728716] audit: initializing netlink socket (disabled)
Oct 18 20:38:54 creabox kernel: [ 0.728799] type=2000 audit(1382121527.724:1): initialized
Oct 18 20:38:54 creabox kernel: [ 0.769866] bounce pool size: 64 pages
Oct 18 20:38:54 creabox kernel: [ 0.769941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 18 20:38:54 creabox kernel: [ 0.770614] VFS: Disk quotas dquot_6.5.2
Oct 18 20:38:54 creabox kernel: [ 0.770712] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 18 20:38:54 creabox kernel: [ 0.771209] FS-Cache: Netfs 'cifs' registered for caching
Oct 18 20:38:54 creabox kernel: [ 0.771324] Key type cifs.spnego registered
Oct 18 20:38:54 creabox kernel: [ 0.771401] Key type cifs.idmap registered
Oct 18 20:38:54 creabox kernel: [ 0.771472] NTFS driver 2.1.30 [Flags: R/W].
Oct 18 20:38:54 creabox kernel: [ 0.771642] fuse init (API version 7.22)
Oct 18 20:38:54 creabox kernel: [ 0.771851] bio: create slab <bio-1> at 1
Oct 18 20:38:54 creabox kernel: [ 0.772098] Btrfs loaded
Oct 18 20:38:54 creabox kernel: [ 0.772174] msgmni has been set to 15821
Oct 18 20:38:54 creabox kernel: [ 0.777121] alg: No test for stdrng (krng)
Oct 18 20:38:54 creabox kernel: [ 0.783352] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Oct 18 20:38:54 creabox kernel: [ 0.783506] NET: Registered protocol family 38
Oct 18 20:38:54 creabox kernel: [ 0.783602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Oct 18 20:38:54 creabox kernel: [ 0.783687] io scheduler noop registered
Oct 18 20:38:54 creabox kernel: [ 0.783753] io scheduler deadline registered
Oct 18 20:38:54 creabox kernel: [ 0.783839] io scheduler cfq registered (default)
Oct 18 20:38:54 creabox kernel: [ 0.784180] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 0.784499] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 0.784707] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.784786] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Oct 18 20:38:54 creabox kernel: [ 0.784878] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.784952] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Oct 18 20:38:54 creabox kernel: [ 0.785027] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
Oct 18 20:38:54 creabox kernel: [ 0.785112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 18 20:38:54 creabox kernel: [ 0.785197] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 18 20:38:54 creabox kernel: [ 0.785270] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
Oct 18 20:38:54 creabox kernel: [ 0.785355] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
Oct 18 20:38:54 creabox kernel: [ 0.785438] cpcihp_generic: not configured, disabling.
Oct 18 20:38:54 creabox kernel: [ 0.785517] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 18 20:38:54 creabox kernel: [ 0.787487] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
Oct 18 20:38:54 creabox kernel: [ 0.787608] vmlfb: initializing
Oct 18 20:38:54 creabox kernel: [ 0.787811] uvesafb: failed to execute /sbin/v86d
Oct 18 20:38:54 creabox kernel: [ 0.787881] uvesafb: make sure that the v86d helper is installed and executable
Oct 18 20:38:54 creabox kernel: [ 0.787964] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
Oct 18 20:38:54 creabox kernel: [ 0.788034] uvesafb: vbe_init() failed with -22
Oct 18 20:38:54 creabox kernel: [ 0.788105] uvesafb: probe of uvesafb.0 failed with error -22
Oct 18 20:38:54 creabox kernel: [ 0.789642] vga16fb: initializing
Oct 18 20:38:54 creabox kernel: [ 0.789707] vga16fb: mapped to 0xffff8800000a0000
Oct 18 20:38:54 creabox kernel: [ 0.883473] Console: switching to colour frame buffer device 80x30
Oct 18 20:38:54 creabox kernel: [ 0.890665] fb0: VGA16 VGA frame buffer device
Oct 18 20:38:54 creabox kernel: [ 0.890930] intel_idle: MWAIT substates: 0x21120
Oct 18 20:38:54 creabox kernel: [ 0.891196] intel_idle: v0.4 model 0x3A
Oct 18 20:38:54 creabox kernel: [ 0.891439] intel_idle: lapic_timer_reliable_states 0xffffffff
Oct 18 20:38:54 creabox kernel: [ 0.891897] ipmi message handler version 39.2
Oct 18 20:38:54 creabox kernel: [ 0.904038] ipmi device interface
Oct 18 20:38:54 creabox kernel: [ 0.916247] IPMI System Interface driver.
Oct 18 20:38:54 creabox kernel: [ 0.928363] ipmi_si: Adding default-specified kcs state machine
Oct 18 20:38:54 creabox kernel: [ 0.940563] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 0.964230] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 0.993556] ipmi_si: Adding default-specified smic state machine
Oct 18 20:38:54 creabox kernel: [ 1.005504] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 1.029477] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 1.085580] ipmi_si: Adding default-specified bt state machine
Oct 18 20:38:54 creabox kernel: [ 1.097546] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
Oct 18 20:38:54 creabox kernel: [ 1.120978] ipmi_si: Interface detection failed
Oct 18 20:38:54 creabox kernel: [ 1.153594] ipmi_si: Unable to find any System Interface(s)
Oct 18 20:38:54 creabox kernel: [ 1.165332] IPMI Watchdog: driver initialized
Oct 18 20:38:54 creabox kernel: [ 1.176980] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
Oct 18 20:38:54 creabox kernel: [ 1.200056] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Oct 18 20:38:54 creabox kernel: [ 1.222642] ACPI: Power Button [PWRB]
Oct 18 20:38:54 creabox kernel: [ 1.234099] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Oct 18 20:38:54 creabox kernel: [ 1.256831] ACPI: Power Button [PWRF]
Oct 18 20:38:54 creabox kernel: [ 1.268437] ACPI: Fan [FAN0] (off)
Oct 18 20:38:54 creabox kernel: [ 1.279774] ACPI: Fan [FAN1] (off)
Oct 18 20:38:54 creabox kernel: [ 1.291016] ACPI: Fan [FAN2] (off)
Oct 18 20:38:54 creabox kernel: [ 1.302160] ACPI: Fan [FAN3] (off)
Oct 18 20:38:54 creabox kernel: [ 1.313160] ACPI: Fan [FAN4] (off)
Oct 18 20:38:54 creabox kernel: [ 1.324055] ACPI: Requesting acpi_cpufreq
Oct 18 20:38:54 creabox kernel: [ 1.362156] thermal LNXTHERM:00: registered as thermal_zone0
Oct 18 20:38:54 creabox kernel: [ 1.373090] ACPI: Thermal Zone [TZ00] (28 C)
Oct 18 20:38:54 creabox kernel: [ 1.384136] thermal LNXTHERM:01: registered as thermal_zone1
Oct 18 20:38:54 creabox kernel: [ 1.394846] ACPI: Thermal Zone [TZ01] (30 C)
Oct 18 20:38:54 creabox kernel: [ 1.405325] GHES: HEST is not enabled!
Oct 18 20:38:54 creabox kernel: [ 1.415589] ioatdma: Intel(R) QuickData Technology Driver 4.00
Oct 18 20:38:54 creabox kernel: [ 1.426146] xenfs: not registering filesystem on non-xen platform
Oct 18 20:38:54 creabox kernel: [ 1.436557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 18 20:38:54 creabox kernel: [ 1.467509] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
Oct 18 20:38:54 creabox kernel: [ 1.488436] Non-volatile memory driver v1.3
Oct 18 20:38:54 creabox kernel: [ 1.499202] Linux agpgart interface v0.103
Oct 18 20:38:54 creabox kernel: [ 1.509628] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Oct 18 20:38:54 creabox kernel: [ 1.531420] Hangcheck: Using getrawmonotonic().
Oct 18 20:38:54 creabox kernel: [ 1.542677] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
Oct 18 20:38:54 creabox kernel: [ 1.601408] [drm] Initialized drm 1.1.0 20060810
Oct 18 20:38:54 creabox kernel: [ 1.612014] drm/i810 does not support SMP
Oct 18 20:38:54 creabox kernel: [ 1.623287] [drm] Memory usable by graphics device = 2048M
Oct 18 20:38:54 creabox kernel: [ 1.633638] checking generic (a0000 10000) vs hw (e0000000 10000000)
Oct 18 20:38:54 creabox kernel: [ 1.643982] fb: conflicting fb hw usage inteldrmfb vs VGA16 VGA - removing generic driver
Oct 18 20:38:54 creabox kernel: [ 1.683615] Console: switching to colour VGA+ 80x25
Oct 18 20:38:54 creabox kernel: [ 1.684515] i915 0000:00:02.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 1.707257] i915 0000:00:02.0: irq 44 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 1.707338] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 18 20:38:54 creabox kernel: [ 1.707407] [drm] Driver supports precise vblank timestamp query.
Oct 18 20:38:54 creabox kernel: [ 1.707602] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Oct 18 20:38:54 creabox kernel: [ 1.713148] tsc: Refined TSC clocksource calibration: 2294.787 MHz
Oct 18 20:38:54 creabox kernel: [ 1.805086] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
Oct 18 20:38:54 creabox kernel: [ 1.875295] fbcon: inteldrmfb (fb0) is primary device
Oct 18 20:38:54 creabox kernel: [ 2.078247] Console: switching to colour frame buffer device 210x65
Oct 18 20:38:54 creabox kernel: [ 2.086197] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Oct 18 20:38:54 creabox kernel: [ 2.086243] i915 0000:00:02.0: registered panic notifier
Oct 18 20:38:54 creabox kernel: [ 2.114469] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Oct 18 20:38:54 creabox kernel: [ 2.114598] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
Oct 18 20:38:54 creabox kernel: [ 2.114693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 18 20:38:54 creabox kernel: [ 2.116595] brd: module loaded
Oct 18 20:38:54 creabox kernel: [ 2.117534] loop: module loaded
Oct 18 20:38:54 creabox kernel: [ 2.117857] nbd: registered device at major 43
Oct 18 20:38:54 creabox kernel: [ 2.119495] events: mcg drbd: 7
Oct 18 20:38:54 creabox kernel: [ 2.123716] drbd: initialized. Version: 8.4.3 (api:1/proto:86-101)
Oct 18 20:38:54 creabox kernel: [ 2.123772] drbd: built-in
Oct 18 20:38:54 creabox kernel: [ 2.123795] drbd: registered as block device major 147
Oct 18 20:38:54 creabox kernel: [ 2.124031] mei_me 0000:00:16.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.124133] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.128082] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128180] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128259] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128428] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 2.128520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 2.128598] lpc_ich: Resource conflict(s) found affecting gpio_ich
Oct 18 20:38:54 creabox kernel: [ 2.128690] Loading iSCSI transport class v2.0-870.
Oct 18 20:38:54 creabox kernel: [ 2.128926] hv_vmbus: registering driver hv_storvsc
Oct 18 20:38:54 creabox kernel: [ 2.129056] ahci 0000:00:1f.2: version 3.0
Oct 18 20:38:54 creabox kernel: [ 2.129263] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.129377] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
Oct 18 20:38:54 creabox kernel: [ 2.129440] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Oct 18 20:38:54 creabox kernel: [ 2.129502] ahci 0000:00:1f.2: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.130267] scsi0 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130526] scsi1 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130698] scsi2 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.130850] scsi3 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131013] scsi4 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131158] scsi5 : ahci
Oct 18 20:38:54 creabox kernel: [ 2.131235] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 46
Oct 18 20:38:54 creabox kernel: [ 2.131291] ata2: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131312] ata3: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131332] ata4: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.131352] ata5: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.132840] ata6: DUMMY
Oct 18 20:38:54 creabox kernel: [ 2.134397] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Oct 18 20:38:54 creabox kernel: [ 2.136467] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
Oct 18 20:38:54 creabox kernel: [ 2.138646] libphy: Fixed MDIO Bus: probed
Oct 18 20:38:54 creabox kernel: [ 2.140374] tun: Universal TUN/TAP device driver, 1.6
Oct 18 20:38:54 creabox kernel: [ 2.142044] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 18 20:38:54 creabox kernel: [ 2.143788] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.145515] e100: Copyright(c) 1999-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.147322] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.149134] e1000: Copyright (c) 1999-2006 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.150969] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
Oct 18 20:38:54 creabox kernel: [ 2.152816] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.154849] e1000e 0000:00:19.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.156820] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Oct 18 20:38:54 creabox kernel: [ 2.158836] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.365213] e1000e 0000:00:19.0 eth0: registered PHC clock
Oct 18 20:38:54 creabox kernel: [ 2.367253] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:a8:6b:fa:7b:3c
Oct 18 20:38:54 creabox kernel: [ 2.369341] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Oct 18 20:38:54 creabox kernel: [ 2.371474] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Oct 18 20:38:54 creabox kernel: [ 2.373614] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
Oct 18 20:38:54 creabox kernel: [ 2.375755] igb: Copyright (c) 2007-2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.377951] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
Oct 18 20:38:54 creabox kernel: [ 2.380180] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.382470] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
Oct 18 20:38:54 creabox kernel: [ 2.384746] ixgbe: Copyright (c) 1999-2013 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.387031] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.7.12-k
Oct 18 20:38:54 creabox kernel: [ 2.389338] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.391656] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
Oct 18 20:38:54 creabox kernel: [ 2.393982] ixgb: Copyright (c) 1999-2008 Intel Corporation.
Oct 18 20:38:54 creabox kernel: [ 2.396329] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
Oct 18 20:38:54 creabox kernel: [ 2.398616] ipw2100: Copyright(c) 2003-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.400913] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmprq
Oct 18 20:38:54 creabox kernel: [ 2.403214] ipw2200: Copyright(c) 2003-2006 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.405560] libipw: 802.11 data/management/control stack, git-1.1.13
Oct 18 20:38:54 creabox kernel: [ 2.407881] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Oct 18 20:38:54 creabox kernel: [ 2.410264] Intel(R) Wireless WiFi driver for Linux, in-tree:d
Oct 18 20:38:54 creabox kernel: [ 2.412603] Copyright(c) 2003-2013 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.415195] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.417755] iwlwifi 0000:02:00.0: U iwl_request_firmware attempting to load firmware EXPERIMENTAL 'iwlwifi-6000g2b-exp.ucode'
Oct 18 20:38:54 creabox kernel: [ 2.420254] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
Oct 18 20:38:54 creabox kernel: [ 2.422654] iwl4965: Copyright(c) 2003-2011 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.425038] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
Oct 18 20:38:54 creabox kernel: [ 2.427387] iwl3945: Copyright(c) 2003-2011 Intel Corporation
Oct 18 20:38:54 creabox kernel: [ 2.429853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 18 20:38:54 creabox kernel: [ 2.432150] ehci-pci: EHCI PCI platform driver
Oct 18 20:38:54 creabox kernel: [ 2.434584] ehci-pci 0000:00:1a.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.436832] ehci-pci 0000:00:1a.0: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.439165] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Oct 18 20:38:54 creabox kernel: [ 2.441424] ehci-pci 0000:00:1a.0: debug port 2
Oct 18 20:38:54 creabox kernel: [ 2.447546] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.449816] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
Oct 18 20:38:54 creabox kernel: [ 2.456846] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 18 20:38:54 creabox kernel: [ 2.459841] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 20:38:54 creabox kernel: [ 2.462107] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.462148] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Oct 18 20:38:54 creabox kernel: [ 2.462206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.462208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.462209] usb usb1: Product: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.462211] usb usb1: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.462212] usb usb1: SerialNumber: 0000:00:1a.0
Oct 18 20:38:54 creabox kernel: [ 2.462409] hub 1-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.462417] hub 1-0:1.0: 3 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.462746] ehci-pci 0000:00:1d.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.462753] ehci-pci 0000:00:1d.0: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.462828] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 18 20:38:54 creabox kernel: [ 2.462845] ehci-pci 0000:00:1d.0: debug port 2
Oct 18 20:38:54 creabox kernel: [ 2.466733] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.466756] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
Oct 18 20:38:54 creabox kernel: [ 2.472763] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Oct 18 20:38:54 creabox kernel: [ 2.472805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.472807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.472808] usb usb2: Product: EHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.472810] usb usb2: Manufacturer: Linux 3.12.0-rc5+ ehci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.472811] usb usb2: SerialNumber: 0000:00:1d.0
Oct 18 20:38:54 creabox kernel: [ 2.472969] hub 2-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.472977] hub 2-0:1.0: 3 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.473157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 18 20:38:54 creabox kernel: [ 2.473159] ohci-pci: OHCI PCI platform driver
Oct 18 20:38:54 creabox kernel: [ 2.473173] ohci-platform: OHCI generic platform driver
Oct 18 20:38:54 creabox kernel: [ 2.473182] uhci_hcd: USB Universal Host Controller Interface driver
Oct 18 20:38:54 creabox kernel: [ 2.524793] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.524932] xhci_hcd 0000:00:14.0: setting latency timer to 64
Oct 18 20:38:54 creabox kernel: [ 2.524936] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525012] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Oct 18 20:38:54 creabox kernel: [ 2.525119] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Oct 18 20:38:54 creabox kernel: [ 2.525149] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 2.525224] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 20:38:54 creabox kernel: [ 2.525226] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.525227] usb usb3: Product: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525229] usb usb3: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.525230] usb usb3: SerialNumber: 0000:00:14.0
Oct 18 20:38:54 creabox kernel: [ 2.525372] hub 3-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.525383] hub 3-0:1.0: 4 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.525843] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525900] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Oct 18 20:38:54 creabox kernel: [ 2.525948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Oct 18 20:38:54 creabox kernel: [ 2.525950] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 20:38:54 creabox kernel: [ 2.525952] usb usb4: Product: xHCI Host Controller
Oct 18 20:38:54 creabox kernel: [ 2.525953] usb usb4: Manufacturer: Linux 3.12.0-rc5+ xhci_hcd
Oct 18 20:38:54 creabox kernel: [ 2.525954] usb usb4: SerialNumber: 0000:00:14.0
Oct 18 20:38:54 creabox kernel: [ 2.526084] hub 4-0:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 2.526095] hub 4-0:1.0: 4 ports detected
Oct 18 20:38:54 creabox kernel: [ 2.573313] ata1.00: supports DRM functions and may not be fully accessible
Oct 18 20:38:54 creabox kernel: [ 2.578378] ata1.00: ATA-9: Crucial_CT120M500SSD3, MU03, max UDMA/133
Oct 18 20:38:54 creabox kernel: [ 2.580415] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Oct 18 20:38:54 creabox kernel: [ 2.586591] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 20:38:54 creabox kernel: [ 2.588615] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.588816] i8042: PNP: No PS/2 controller found. Probing ports directly.
Oct 18 20:38:54 creabox kernel: [ 2.592630] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 20:38:54 creabox kernel: [ 2.594911] ata1.00: supports DRM functions and may not be fully accessible
Oct 18 20:38:54 creabox kernel: [ 2.603683] ata1.00: configured for UDMA/133
Oct 18 20:38:54 creabox kernel: [ 2.606513] scsi 0:0:0:0: Direct-Access ATA Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
Oct 18 20:38:54 creabox kernel: [ 2.608790] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 18 20:38:54 creabox kernel: [ 2.608823] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Oct 18 20:38:54 creabox kernel: [ 2.608825] sd 0:0:0:0: [sda] 4096-byte physical blocks
Oct 18 20:38:54 creabox kernel: [ 2.608932] sd 0:0:0:0: [sda] Write Protect is off
Oct 18 20:38:54 creabox kernel: [ 2.608935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 18 20:38:54 creabox kernel: [ 2.608969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 20:38:54 creabox kernel: [ 2.609532] sda: sda1
Oct 18 20:38:54 creabox kernel: [ 2.609906] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 18 20:38:54 creabox kernel: [ 3.627952] i8042: No controller found
Oct 18 20:38:54 creabox kernel: [ 3.630668] Switched to clocksource tsc
Oct 18 20:38:54 creabox kernel: [ 3.630794] mousedev: PS/2 mouse device common for all mice
Oct 18 20:38:54 creabox kernel: [ 3.630990] rtc_cmos 00:04: RTC can wake from S4
Oct 18 20:38:54 creabox kernel: [ 3.631140] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 18 20:38:54 creabox kernel: [ 3.631175] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Oct 18 20:38:54 creabox kernel: [ 3.631352] i2c /dev entries driver
Oct 18 20:38:54 creabox kernel: [ 3.631870] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
Oct 18 20:38:54 creabox kernel: [ 3.631872] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 20:38:54 creabox kernel: [ 3.631983] pps_ldisc: PPS line discipline registered
Oct 18 20:38:54 creabox kernel: [ 3.637109] w83627ehf: Found NCT6776F chip at 0xa30
Oct 18 20:38:54 creabox kernel: [ 3.645223] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Oct 18 20:38:54 creabox kernel: [ 3.645270] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Oct 18 20:38:54 creabox kernel: [ 3.645295] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
Oct 18 20:38:54 creabox kernel: [ 3.645359] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 18 20:38:54 creabox kernel: [ 3.645365] iTCO_vendor_support: vendor-support=0
Oct 18 20:38:54 creabox kernel: [ 3.645397] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
Oct 18 20:38:54 creabox kernel: [ 3.651811] device-mapper: uevent: version 1.0.3
Oct 18 20:38:54 creabox kernel: [ 3.656306] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
Oct 18 20:38:54 creabox kernel: [ 3.667598] Intel P-state driver initializing.
Oct 18 20:38:54 creabox kernel: [ 3.667608] Intel pstate controlling: cpu 0
Oct 18 20:38:54 creabox kernel: [ 3.667629] Intel pstate controlling: cpu 1
Oct 18 20:38:54 creabox kernel: [ 3.667646] Intel pstate controlling: cpu 2
Oct 18 20:38:54 creabox kernel: [ 3.667660] Intel pstate controlling: cpu 3
Oct 18 20:38:54 creabox kernel: [ 3.667712] leds_ss4200: no LED devices found
Oct 18 20:38:54 creabox kernel: [ 3.667729] hidraw: raw HID events driver (C) Jiri Kosina
Oct 18 20:38:54 creabox kernel: [ 3.667823] usbcore: registered new interface driver usbhid
Oct 18 20:38:54 creabox kernel: [ 3.667823] usbhid: USB HID core driver
Oct 18 20:38:54 creabox kernel: [ 3.667827] hv_utils: Registering HyperV Utility Driver
Oct 18 20:38:54 creabox kernel: [ 3.667828] hv_vmbus: registering driver hv_util
Oct 18 20:38:54 creabox kernel: [ 3.667892] usbcore: registered new interface driver snd-usb-audio
Oct 18 20:38:54 creabox kernel: [ 3.667903] usbcore: registered new interface driver snd-ua101
Oct 18 20:38:54 creabox kernel: [ 3.667913] usbcore: registered new interface driver snd-usb-usx2y
Oct 18 20:38:54 creabox kernel: [ 3.667923] usbcore: registered new interface driver snd-usb-us122l
Oct 18 20:38:54 creabox kernel: [ 3.667933] usbcore: registered new interface driver snd-usb-caiaq
Oct 18 20:38:54 creabox kernel: [ 3.667941] usbcore: registered new interface driver snd-usb-6fire
Oct 18 20:38:54 creabox kernel: [ 3.667951] usbcore: registered new interface driver snd-usb-hiface
Oct 18 20:38:54 creabox kernel: [ 3.669209] drop_monitor: Initializing network drop monitor service
Oct 18 20:38:54 creabox kernel: [ 3.669224] GACT probability on
Oct 18 20:38:54 creabox kernel: [ 3.669225] Mirror/redirect action on
Oct 18 20:38:54 creabox kernel: [ 3.669226] Simple TC action Loaded
Oct 18 20:38:54 creabox kernel: [ 3.669307] netem: version 1.3
Oct 18 20:38:54 creabox kernel: [ 3.669308] u32 classifier
Oct 18 20:38:54 creabox kernel: [ 3.669309] Performance counters on
Oct 18 20:38:54 creabox kernel: [ 3.669309] input device check on
Oct 18 20:38:54 creabox kernel: [ 3.669309] Actions configured
Oct 18 20:38:54 creabox kernel: [ 3.669312] Netfilter messages via NETLINK v0.30.
Oct 18 20:38:54 creabox kernel: [ 3.669314] nfnl_acct: registering with nfnetlink.
Oct 18 20:38:54 creabox kernel: [ 3.669323] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Oct 18 20:38:54 creabox kernel: [ 3.672376] ctnetlink v0.93: registering with nfnetlink.
Oct 18 20:38:54 creabox kernel: [ 3.673882] xt_time: kernel timezone is -0000
Oct 18 20:38:54 creabox kernel: [ 3.673884] ip_set: protocol 6
Oct 18 20:38:54 creabox kernel: [ 3.673889] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
Oct 18 20:38:54 creabox kernel: [ 3.675399] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
Oct 18 20:38:54 creabox kernel: [ 3.675428] IPVS: Creating netns size=2048 id=0
Oct 18 20:38:54 creabox kernel: [ 3.675433] IPVS: ipvs loaded.
Oct 18 20:38:54 creabox kernel: [ 3.675435] IPVS: [rr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675435] IPVS: [wrr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675436] IPVS: [lc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675436] IPVS: [wlc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675438] IPVS: [lblc] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675440] IPVS: [lblcr] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675441] IPVS: [dh] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675441] IPVS: [sh] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675442] IPVS: [sed] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675442] IPVS: [nq] scheduler registered.
Oct 18 20:38:54 creabox kernel: [ 3.675525] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 18 20:38:54 creabox kernel: [ 3.675558] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
Oct 18 20:38:54 creabox kernel: [ 3.675566] arp_tables: (C) 2002 David S. Miller
Oct 18 20:38:54 creabox kernel: [ 3.675575] TCP: cubic registered
Oct 18 20:38:54 creabox kernel: [ 3.675576] Initializing XFRM netlink socket
Oct 18 20:38:54 creabox kernel: [ 3.675579] NET: Registered protocol family 17
Oct 18 20:38:54 creabox kernel: [ 3.675582] NET: Registered protocol family 15
Oct 18 20:38:54 creabox kernel: [ 3.676917] Bridge firewalling registered
Oct 18 20:38:54 creabox kernel: [ 3.676919] Ebtables v2.0 registered
Oct 18 20:38:54 creabox kernel: [ 3.684138] usb 1-1: new high-speed USB device number 2 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 3.741573] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
Oct 18 20:38:54 creabox kernel: [ 3.756181] NET: Registered protocol family 33
Oct 18 20:38:54 creabox kernel: [ 3.757212] Key type rxrpc registered
Oct 18 20:38:54 creabox kernel: [ 3.758214] Key type rxrpc_s registered
Oct 18 20:38:54 creabox kernel: [ 3.759209] 8021q: 802.1Q VLAN Support v1.8
Oct 18 20:38:54 creabox kernel: [ 3.760218] lib80211: common routines for IEEE802.11 drivers
Oct 18 20:38:54 creabox kernel: [ 3.761169] lib80211_crypt: registered algorithm 'NULL'
Oct 18 20:38:54 creabox kernel: [ 3.762109] lib80211_crypt: registered algorithm 'WEP'
Oct 18 20:38:54 creabox kernel: [ 3.763030] lib80211_crypt: registered algorithm 'CCMP'
Oct 18 20:38:54 creabox kernel: [ 3.763945] lib80211_crypt: registered algorithm 'TKIP'
Oct 18 20:38:54 creabox kernel: [ 3.764899] Key type dns_resolver registered
Oct 18 20:38:54 creabox kernel: [ 3.766712] registered taskstats version 1
Oct 18 20:38:54 creabox kernel: [ 3.768154] console [netcon0] enabled
Oct 18 20:38:54 creabox kernel: [ 3.769154] netconsole: network logging started
Oct 18 20:38:54 creabox kernel: [ 3.770200] rtc_cmos 00:04: setting system clock to 2013-10-18 18:38:50 UTC (1382121530)
Oct 18 20:38:54 creabox kernel: [ 3.771241] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 18 20:38:54 creabox kernel: [ 3.772230] EDD information not available.
Oct 18 20:38:54 creabox kernel: [ 3.773237] ALSA device list:
Oct 18 20:38:54 creabox kernel: [ 3.774188] No soundcards found.
Oct 18 20:38:54 creabox kernel: [ 3.776327] Freeing unused kernel memory: 1140K (ffffffff81f1e000 - ffffffff8203b000)
Oct 18 20:38:54 creabox kernel: [ 3.777319] Write protecting the kernel read-only data: 14336k
Oct 18 20:38:54 creabox kernel: [ 3.780434] Freeing unused kernel memory: 816K (ffff880001934000 - ffff880001a00000)
Oct 18 20:38:54 creabox kernel: [ 3.782175] Freeing unused kernel memory: 276K (ffff880001dbb000 - ffff880001e00000)
Oct 18 20:38:54 creabox kernel: [ 3.816486] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 20:38:54 creabox kernel: [ 3.818006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 3.819778] hub 1-1:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 3.821484] hub 1-1:1.0: 6 ports detected
Oct 18 20:38:54 creabox kernel: [ 3.853966] iwlwifi 0000:02:00.0: U iwl_request_firmware attempting to load firmware 'iwlwifi-6000g2b-6.ucode'
Oct 18 20:38:54 creabox kernel: [ 3.855820] iwlwifi 0000:02:00.0: U iwl_req_fw_callback Loaded firmware file 'iwlwifi-6000g2b-6.ucode' (679436 bytes).
Oct 18 20:38:54 creabox kernel: [ 3.857441] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr runtime inst size = 159932
Oct 18 20:38:54 creabox kernel: [ 3.859056] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr runtime data size = 81920
Oct 18 20:38:54 creabox kernel: [ 3.860705] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr init inst size = 130228
Oct 18 20:38:54 creabox kernel: [ 3.862319] iwlwifi 0000:02:00.0: U validate_sec_sizes f/w package hdr init data size = 81920
Oct 18 20:38:54 creabox kernel: [ 3.863826] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
Oct 18 20:38:54 creabox kernel: [ 3.865466] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
Oct 18 20:38:54 creabox kernel: [ 3.867050] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
Oct 18 20:38:54 creabox kernel: [ 3.868611] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
Oct 18 20:38:54 creabox kernel: [ 3.870066] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start *** LOAD DRIVER ***
Oct 18 20:38:54 creabox kernel: [ 3.871393] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start BT channel inhibition is On
Oct 18 20:38:54 creabox kernel: [ 3.872653] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
Oct 18 20:38:54 creabox kernel: [ 3.874020] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 3.875379] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 3.876666] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 3.877899] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 3.885782] iwlwifi 0000:02:00.0: U iwl_read_eeprom NVM size = 2048
Oct 18 20:38:54 creabox kernel: [ 3.886942] iwlwifi 0000:02:00.0: U iwl_eeprom_verify_signature EEPROM signature=0x00000001
Oct 18 20:38:54 creabox kernel: [ 3.888150] iwlwifi 0000:02:00.0: U iwl_eeprom_acquire_semaphore Acquired semaphore after 1 tries.
Oct 18 20:38:54 creabox kernel: [ 3.900344] iwlwifi 0000:02:00.0: U iwl_read_eeprom NVM Type: OTP
Oct 18 20:38:54 creabox kernel: [ 3.901644] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop Stop card, put in low power state
Oct 18 20:38:54 creabox kernel: [ 3.902837] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop_master stop master
Oct 18 20:38:54 creabox kernel: [ 3.904091] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.905331] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.906554] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.907771] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.908968] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.910148] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.911314] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.912473] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.913645] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.914796] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.915955] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 3.917133] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.918279] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.919405] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.920546] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.921684] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.922799] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.923902] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.925017] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.926114] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.927195] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.928302] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.929400] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.930475] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.931542] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.932634] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.933709] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.934762] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.935771] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.936010] usb 2-1: new high-speed USB device number 2 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 3.937874] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.938951] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.940033] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.941099] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.942151] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.943213] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.944300] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.945390] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.946435] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.947470] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.948522] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.949576] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.950580] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.951560] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.952540] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.953512] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.954463] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.955408] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.956360] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.957296] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.958206] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.959110] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
Oct 18 20:38:54 creabox kernel: [ 3.960034] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.960978] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.961882] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.962764] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.963637] iwlwifi 0000:02:00.0: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 3.964521] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 3.965400] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.966273] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.967156] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID 40MHZ (0x09)
Oct 18 20:38:54 creabox kernel: [ 3.968056] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.968955] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.969845] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 3.970730] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.971605] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.972529] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 3.973464] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.974391] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.975346] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 3.976341] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x18 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.977349] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x04 Low 20_on_40: 0x04
Oct 18 20:38:54 creabox kernel: [ 3.978360] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 3.979381] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.980424] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.981491] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 3.982534] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.983595] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.984686] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 0: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 3.985782] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.986872] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.988012] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 60: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 3.989162] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.990306] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.991473] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 60: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 3.992699] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.993918] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.995131] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 102: VALID BAND_52G OFDM 40MHZ HT_AP COMMON_TYPE (0x9f)
Oct 18 20:38:54 creabox kernel: [ 3.996391] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 3.997648] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 3.998911] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 120: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 4.000210] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.001523] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.002824] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 120: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 4.004145] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.005436] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.006733] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 140: VALID BAND_52G OFDM COMMON_TYPE (0x87)
Oct 18 20:38:54 creabox kernel: [ 4.008030] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.009320] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.010597] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Common 136: VALID BAND_52G OFDM HT_AP COMMON_TYPE (0x97)
Oct 18 20:38:54 creabox kernel: [ 4.011874] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.013174] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.014497] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 4.015808] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.017157] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.018512] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.019853] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.021236] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.022642] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 1: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.024061] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x17 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.025492] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.026930] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 2: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.028398] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.029880] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.031364] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 2: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.032887] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.034402] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.035912] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.037432] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.038981] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.040556] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.042136] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1e chain_B: 0X1e chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.043687] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.045278] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.046850] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.048427] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.050013] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.051564] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x16 chain_B: 0X16 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.053166] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x14 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.054750] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID (0x01)
Oct 18 20:38:54 creabox kernel: [ 4.056326] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.057899] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.059469] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID OFDM (0x05)
Oct 18 20:38:54 creabox kernel: [ 4.061048] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.062623] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.064207] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 13: VALID OFDM HT_AP (0x15)
Oct 18 20:38:54 creabox kernel: [ 4.065781] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.067329] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.068925] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 3: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.070489] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x10 chain_B: 0X0f chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.072085] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0c MIMO3: 0x00 High 20_on_40: 0x0c Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.072247] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 20:38:54 creabox kernel: [ 4.072249] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 4.072528] hub 2-1:1.0: USB hub found
Oct 18 20:38:54 creabox kernel: [ 4.072625] hub 2-1:1.0: 8 ports detected
Oct 18 20:38:54 creabox kernel: [ 4.080594] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 4: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.082269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.084536] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086210] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x12 chain_B: 0X10 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.086224] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.086550] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086572] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.086909] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.086927] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
Oct 18 20:38:54 creabox kernel: [ 4.087261] microcode: CPU3 updated to revision 0x19, date = 2013-06-13
Oct 18 20:38:54 creabox kernel: [ 4.098426] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x10 MIMO3: 0x00 High 20_on_40: 0x0a Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.100215] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 5: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.101918] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x16 chain_B: 0X15 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.103606] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x14 MIMO3: 0x00 High 20_on_40: 0x08 Low 20_on_40: 0x06
Oct 18 20:38:54 creabox kernel: [ 4.105305] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 7: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.106893] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X14 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.108482] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x12 MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x08
Oct 18 20:38:54 creabox kernel: [ 4.110087] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 8: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.111665] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x13 chain_B: 0X11 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.113253] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0f MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x0a
Oct 18 20:38:54 creabox kernel: [ 4.114850] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 9: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.116444] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x11 chain_B: 0X0f chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.118028] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x0d MIMO3: 0x00 High 20_on_40: 0x06 Low 20_on_40: 0x0c
Oct 18 20:38:54 creabox kernel: [ 4.119607] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 10: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.121199] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X18 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.122783] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x04
Oct 18 20:38:54 creabox kernel: [ 4.124399] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 11: VALID OFDM 40MHZ HT_AP (0x1d)
Oct 18 20:38:54 creabox kernel: [ 4.125978] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x18 chain_B: 0X17 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.127540] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.129139] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 36: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.130730] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.132320] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.133916] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 36: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.135485] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x19 chain_B: 0X1b chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.137071] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x17 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.138667] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 64: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.140263] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.141849] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.143427] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 64: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.145024] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.146725] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.148332] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 100: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.149929] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.151499] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.153101] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 100: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.154699] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.156302] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.157905] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 140: VALID BAND_52G OFDM (0x07)
Oct 18 20:38:54 creabox kernel: [ 4.159478] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.161071] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x00 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.162673] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 140: VALID BAND_52G OFDM HT_AP (0x17)
Oct 18 20:38:54 creabox kernel: [ 4.164272] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1d chain_B: 0X1d chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.165866] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.167452] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 38: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.169058] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X14 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.170656] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x10 MIMO3: 0x00 High 20_on_40: 0x0a Low 20_on_40: 0x08
Oct 18 20:38:54 creabox kernel: [ 4.172366] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 46: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.174129] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1c chain_B: 0X1c chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.175825] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x18 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.177537] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 62: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.179238] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x14 chain_B: 0X15 chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.180946] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x11 MIMO3: 0x00 High 20_on_40: 0x08 Low 20_on_40: 0x0a
Oct 18 20:38:54 creabox kernel: [ 4.182636] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower Channel 102: VALID BAND_52G OFDM 40MHZ HT_AP (0x1f)
Oct 18 20:38:54 creabox kernel: [ 4.184352] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower chain_A: 0x1a chain_B: 0X1a chain_C: 0X00
Oct 18 20:38:54 creabox kernel: [ 4.186057] iwlwifi 0000:02:00.0: U iwl_eeprom_enhanced_txpower MIMO2: 0x16 MIMO3: 0x00 High 20_on_40: 0x00 Low 20_on_40: 0x00
Oct 18 20:38:54 creabox kernel: [ 4.187757] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.189456] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.191137] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.192783] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.194395] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.195996] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.197580] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.199153] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.200711] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.202251] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.203749] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.205150] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.206552] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.207958] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
Oct 18 20:38:54 creabox kernel: [ 4.209361] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.210748] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.212151] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.213513] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.214842] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.216199] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.217532] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.218830] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.220136] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.221434] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.222701] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.223968] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.225215] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.226428] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.227623] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.228822] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.230005] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.231147] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.232293] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.233431] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.234533] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.235617] iwlwifi 0000:02:00.0: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
Oct 18 20:38:54 creabox kernel: [ 4.236713] iwlwifi 0000:02:00.0: U iwl_nvm_check_version device EEPROM VER=0x756, CALIB=0x6
Oct 18 20:38:54 creabox kernel: [ 4.237799] iwlwifi 0000:02:00.0: U iwl_eeprom_init_hw_params Device SKU: 24GHz enabled, 52GHz enabled, 11.n enabled
Oct 18 20:38:54 creabox kernel: [ 4.238877] iwlwifi 0000:02:00.0: U iwl_eeprom_init_hw_params Valid Tx ant: 0x3, Valid Rx ant: 0x3
Oct 18 20:38:54 creabox kernel: [ 4.239973] iwlwifi 0000:02:00.0: U iwl_op_mode_dvm_start MAC address: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 4.241061] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 4.242225] iwlwifi 0000:02:00.0: U iwl_tt_initialize Initialize Thermal Throttling
Oct 18 20:38:54 creabox kernel: [ 4.243302] iwlwifi 0000:02:00.0: U iwl_tt_initialize Advanced Thermal Throttling
Oct 18 20:38:54 creabox kernel: [ 4.244491] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 1401ed
Oct 18 20:38:54 creabox kernel: [ 4.245706] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Oct 18 20:38:54 creabox kernel: [ 4.248884] bio: create slab <bio-2> at 2
Oct 18 20:38:54 creabox kernel: [ 4.294665] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 20:38:54 creabox kernel: [ 4.415813] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
Oct 18 20:38:54 creabox kernel: [ 4.512006] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
Oct 18 20:38:54 creabox kernel: [ 4.513659] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 20:38:54 creabox kernel: [ 4.741165] EXT4-fs (dm-0): re-mounted. Opts: (null)
Oct 18 20:38:54 creabox kernel: [ 4.770619] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro
Oct 18 20:38:54 creabox kernel: [ 4.967861] Adding 1949692k swap on /dev/mapper/creabox-creabox_swap. Priority:-1 extents:1 across:1949692k SS
Oct 18 20:38:54 creabox kernel: [ 5.125964] iwlwifi 0000:02:00.0: U iwlagn_mac_start enter
Oct 18 20:38:54 creabox kernel: [ 5.127398] iwlwifi 0000:02:00.0: I iwl_prep_station Add STA to driver ID 15: ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.128832] iwlwifi 0000:02:00.0: I iwl_prep_station Add STA to driver ID 14: ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.130201] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 5.131553] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 5.132876] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 5.134230] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 5.142113] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
Oct 18 20:38:54 creabox kernel: [ 5.189000] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.191379] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.193743] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0900, 72 bytes at 0[0]:9
Oct 18 20:38:54 creabox kernel: [ 5.196211] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.198680] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.200166] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.201619] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0901, 12 bytes at 1[1]:9
Oct 18 20:38:54 creabox kernel: [ 5.203209] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.205857] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.207423] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.208965] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x0902, 8 bytes at 2[2]:9
Oct 18 20:38:54 creabox kernel: [ 5.210591] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.213235] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.214889] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.216504] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x0903, 96 bytes at 3[3]:9
Oct 18 20:38:54 creabox kernel: [ 5.218253] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.445009] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop Stop card, put in low power state
Oct 18 20:38:54 creabox kernel: [ 5.446708] iwlwifi 0000:02:00.0: U iwl_pcie_apm_stop_master stop master
Oct 18 20:38:54 creabox kernel: [ 5.448400] iwlwifi 0000:02:00.0: U iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
Oct 18 20:38:54 creabox kernel: [ 5.450061] iwlwifi 0000:02:00.0: U iwl_pcie_set_hw_ready hardware ready
Oct 18 20:38:54 creabox kernel: [ 5.451711] iwlwifi 0000:02:00.0: U iwl_pcie_apm_init Init card's basic functions
Oct 18 20:38:54 creabox kernel: [ 5.453372] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 18 20:38:54 creabox kernel: [ 5.461504] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
Oct 18 20:38:54 creabox kernel: [ 5.508853] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.510526] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.512165] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command COEX_PRIORITY_TABLE_CMD (#5a), seq: 0x0900, 72 bytes at 0[0]:9
Oct 18 20:38:54 creabox kernel: [ 5.513855] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command COEX_PRIORITY_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.515531] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.517179] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.518800] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0901, 12 bytes at 1[1]:9
Oct 18 20:38:54 creabox kernel: [ 5.520495] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.522146] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.523789] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.525388] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0902, 12 bytes at 2[2]:9
Oct 18 20:38:54 creabox kernel: [ 5.527057] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.528702] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.530297] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.531870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0903, 12 bytes at 3[3]:9
Oct 18 20:38:54 creabox kernel: [ 5.533537] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.535178] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.536807] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.538411] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0904, 520 bytes at 4[4]:9
Oct 18 20:38:54 creabox kernel: [ 5.540137] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.541838] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.543492] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.545123] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0905, 1352 bytes at 5[5]:9
Oct 18 20:38:54 creabox kernel: [ 5.546925] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.548610] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.550476] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.552229] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_PHY_CALIBRATION_CMD (#b0), seq: 0x0906, 92 bytes at 6[6]:9
Oct 18 20:38:54 creabox kernel: [ 5.554042] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_PHY_CALIBRATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.556377] iwlwifi 0000:02:00.0: U iwl_alive_start Runtime Alive received.
Oct 18 20:38:54 creabox kernel: [ 5.558599] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.560376] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.562252] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0907, 76 bytes at 7[7]:9
Oct 18 20:38:54 creabox kernel: [ 5.564087] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_CONFIG
Oct 18 20:38:54 creabox kernel: [ 5.565893] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.567696] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.569456] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PRIO_TABLE (#cc), seq: 0x0908, 20 bytes at 8[8]:9
Oct 18 20:38:54 creabox kernel: [ 5.571285] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PRIO_TABLE
Oct 18 20:38:54 creabox kernel: [ 5.573002] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.574842] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.576659] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x0909, 8 bytes at 9[9]:9
Oct 18 20:38:54 creabox kernel: [ 5.578510] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.580298] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.582160] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.583998] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_BT_COEX_PROT_ENV (#cd), seq: 0x090A, 8 bytes at 10[10]:9
Oct 18 20:38:54 creabox kernel: [ 5.585854] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_BT_COEX_PROT_ENV
Oct 18 20:38:54 creabox kernel: [ 5.587623] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.589337] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.591037] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command CALIBRATION_CFG_CMD (#65), seq: 0x090B, 96 bytes at 11[11]:9
Oct 18 20:38:54 creabox kernel: [ 5.592878] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command CALIBRATION_CFG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.594611] iwlwifi 0000:02:00.0: U iwlagn_send_tx_ant_config select valid tx ant: 3
Oct 18 20:38:54 creabox kernel: [ 5.596361] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.598084] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.599809] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TX_ANT_CONFIGURATION_CMD (#98), seq: 0x090C, 8 bytes at 12[12]:9
Oct 18 20:38:54 creabox kernel: [ 5.620752] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TX_ANT_CONFIGURATION_CMD
Oct 18 20:38:54 creabox kernel: [ 5.622514] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.624264] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x090D, 8 bytes at 13[13]:9
Oct 18 20:38:54 creabox kernel: [ 5.626006] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.626073] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.629464] iwl data: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.631202] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.632927] iwl data: 00000020: 05 80 00 00 00 00 00 00 01 00 ff ff ff 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.634644] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.636402] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.638131] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.639864] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000000
Oct 18 20:38:54 creabox kernel: [ 5.641577] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.643286] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.644980] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.646650] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.648313] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.649975] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.651608] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.653243] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.653243] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.653243] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.653243] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.659691] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.661307] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.662920] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x090E, 54 bytes at 14[14]:9
Oct 18 20:38:54 creabox kernel: [ 5.665818] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.667484] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.667490] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.667492] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations No active stations found to be cleared
Oct 18 20:38:54 creabox kernel: [ 5.667495] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.667496] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.667499] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.667500] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.667502] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.667504] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x090F, 96 bytes at 15[15]:9
Oct 18 20:38:54 creabox kernel: [ 5.681860] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.683472] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.685037] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.686600] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.688152] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.689702] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.691292] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 0 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.692856] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.694412] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.695966] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0910, 92 bytes at 16[16]:9
Oct 18 20:38:54 creabox kernel: [ 5.697643] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.699286] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.700873] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.702440] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.704034] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.705606] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_CT_KILL_CONFIG_CMD (#a4), seq: 0x0911, 16 bytes at 17[17]:9
Oct 18 20:38:54 creabox kernel: [ 5.707224] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_CT_KILL_CONFIG_CMD
Oct 18 20:38:54 creabox kernel: [ 5.708847] iwlwifi 0000:02:00.0: U iwl_rf_kill_ct_config REPLY_CT_KILL_CONFIG_CMD succeeded, critical temperature enter is 114,exit is 95
Oct 18 20:38:54 creabox kernel: [ 5.710484] iwlwifi 0000:02:00.0: U iwl_alive_start ALIVE processing complete.
Oct 18 20:38:54 creabox kernel: [ 5.712097] iwlwifi 0000:02:00.0: U iwl_power_sleep_cam_cmd Sleep command for CAM
Oct 18 20:38:54 creabox kernel: [ 5.713702] iwlwifi 0000:02:00.0: U iwl_set_power Sending power/sleep command
Oct 18 20:38:54 creabox kernel: [ 5.715282] iwlwifi 0000:02:00.0: U iwl_set_power Flags value = 0x00000008
Oct 18 20:38:54 creabox kernel: [ 5.716855] iwlwifi 0000:02:00.0: U iwl_set_power Tx timeout = 0
Oct 18 20:38:54 creabox kernel: [ 5.718430] iwlwifi 0000:02:00.0: U iwl_set_power Rx timeout = 0
Oct 18 20:38:54 creabox kernel: [ 5.719952] iwlwifi 0000:02:00.0: U iwl_set_power Sleep interval vector = { 0 , 0 , 0 , 0 , 0 }
Oct 18 20:38:54 creabox kernel: [ 5.721478] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.723004] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.724554] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0912, 40 bytes at 18[18]:9
Oct 18 20:38:54 creabox kernel: [ 5.726138] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command POWER_TABLE_CMD
Oct 18 20:38:54 creabox kernel: [ 5.727695] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.729219] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.730703] iwlwifi 0000:02:00.0: U iwlagn_mac_start Start UP work done.
Oct 18 20:38:54 creabox kernel: [ 5.732186] iwlwifi 0000:02:00.0: U iwlagn_mac_start leave
Oct 18 20:38:54 creabox kernel: [ 5.733639] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_LEDS_CMD (#48), seq: 0x0913, 12 bytes at 19[19]:9
Oct 18 20:38:54 creabox kernel: [ 5.735117] iwlwifi 0000:02:00.0: U iwlagn_mac_add_interface enter: type 2, addr b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.736625] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.738119] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.739598] iwl data: 00000000: b4 b6 76 b6 4b 3f 00 00 00 00 00 00 00 00 00 00 ..v.K?..........
Oct 18 20:38:54 creabox kernel: [ 5.741088] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.742588] iwl data: 00000020: 05 80 00 00 04 00 00 00 01 00 ff ff ff 00 00 00 ................
Oct 18 20:38:54 creabox kernel: [ 5.744117] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.745655] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.747187] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.748710] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000004
Oct 18 20:38:54 creabox kernel: [ 5.750241] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.751761] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.753283] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.754785] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.756288] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.757778] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.759268] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.760780] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.760780] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.760780] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.760780] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.766686] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.768194] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.769668] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0914, 54 bytes at 20[20]:9
Oct 18 20:38:54 creabox kernel: [ 5.771428] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.772976] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.772989] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.772991] iwlwifi 0000:02:00.0: I iwl_clear_ucode_stations Clearing ucode active for station 15
Oct 18 20:38:54 creabox kernel: [ 5.772994] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.772995] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.772997] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.772999] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.773000] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.773002] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0915, 96 bytes at 21[21]:9
Oct 18 20:38:54 creabox kernel: [ 5.786416] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.787913] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.789392] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.790881] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.792363] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.793852] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.795358] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 1 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.796835] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.798304] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.799771] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0916, 92 bytes at 22[22]:9
Oct 18 20:38:54 creabox kernel: [ 5.801340] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.802886] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.804387] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.805862] iwlwifi 0000:02:00.0: U iwlagn_mac_add_interface leave
Oct 18 20:38:54 creabox kernel: [ 5.807328] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.808762] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd RX CONFIG:
Oct 18 20:38:54 creabox kernel: [ 5.810197] iwl data: 00000000: b4 b6 76 b6 4b 3f 00 00 00 00 00 00 00 00 00 00 ..v.K?..........
Oct 18 20:38:54 creabox kernel: [ 5.811655] iwl data: 00000010: 00 00 00 00 00 00 00 00 03 00 06 24 15 0f 00 00 ...........$....
Oct 18 20:38:54 creabox kernel: [ 5.813143] iwl data: 00000020: 05 80 00 00 44 00 00 00 01 00 ff ff ff 00 00 00 ....D...........
Oct 18 20:38:54 creabox kernel: [ 5.814615] iwl data: 00000030: 00 00 ..
Oct 18 20:38:54 creabox kernel: [ 5.816106] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 channel: 0x1
Oct 18 20:38:54 creabox kernel: [ 5.817593] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 flags: 0x00008005
Oct 18 20:38:54 creabox kernel: [ 5.819068] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u32 filter_flags: 0x00000044
Oct 18 20:38:54 creabox kernel: [ 5.820560] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 dev_type: 0x3
Oct 18 20:38:54 creabox kernel: [ 5.822016] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 ofdm_basic_rates: 0x15
Oct 18 20:38:54 creabox kernel: [ 5.823453] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8 cck_basic_rates: 0x0f
Oct 18 20:38:54 creabox kernel: [ 5.824868] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] node_addr: b4:b6:76:b6:4b:3f
Oct 18 20:38:54 creabox kernel: [ 5.826302] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u8[6] bssid_addr: 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.827731] iwlwifi 0000:02:00.0: U iwl_print_rx_config_cmd u16 assoc_id: 0x0
Oct 18 20:38:54 creabox kernel: [ 5.829176] iwlwifi 0000:02:00.0: U iwl_full_rxon_required need full RXON - !iwl_is_associated_ctx(ctx)
Oct 18 20:38:54 creabox kernel: [ 5.830599] iwlwifi 0000:02:00.0: U iwlagn_commit_rxon Going to commit RXON
Oct 18 20:38:54 creabox kernel: [ 5.830599] * without RXON_FILTER_ASSOC_MSK
Oct 18 20:38:54 creabox kernel: [ 5.830599] * channel = 1
Oct 18 20:38:54 creabox kernel: [ 5.830599] * bssid = 00:00:00:00:00:00
Oct 18 20:38:54 creabox kernel: [ 5.836136] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.837534] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.838929] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0917, 54 bytes at 23[23]:9
Oct 18 20:38:54 creabox kernel: [ 5.840621] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON
Oct 18 20:38:54 creabox kernel: [ 5.842072] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:38:54 creabox kernel: [ 5.842085] iwlwifi 0000:02:00.0: U iwl_clear_ucode_stations Clearing ucode stations in driver
Oct 18 20:38:54 creabox kernel: [ 5.842087] iwlwifi 0000:02:00.0: I iwl_clear_ucode_stations Clearing ucode active for station 15
Oct 18 20:38:54 creabox kernel: [ 5.842090] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations ... start.
Oct 18 20:38:54 creabox kernel: [ 5.842091] iwlwifi 0000:02:00.0: I iwl_restore_stations Restoring sta ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.842093] iwlwifi 0000:02:00.0: U iwl_send_add_sta Adding sta 15 (ff:ff:ff:ff:ff:ff) synchronously
Oct 18 20:38:54 creabox kernel: [ 5.842095] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.842096] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.842098] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0918, 96 bytes at 24[24]:9
Oct 18 20:38:54 creabox kernel: [ 5.855110] iwlwifi 0000:02:00.0: U iwl_process_add_sta_resp Processing response for adding station 15
Oct 18 20:38:54 creabox kernel: [ 5.856583] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp REPLY_ADD_STA PASSED
Oct 18 20:38:54 creabox kernel: [ 5.858048] iwlwifi 0000:02:00.0: I iwl_sta_ucode_activate Added STA id 15 addr ff:ff:ff:ff:ff:ff to uCode
Oct 18 20:38:54 creabox kernel: [ 5.859540] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station id 15 addr ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.861035] iwlwifi 0000:02:00.0: I iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
Oct 18 20:38:54 creabox kernel: [ 5.862524] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA
Oct 18 20:38:54 creabox kernel: [ 5.864055] iwlwifi 0000:02:00.0: U is_lq_table_valid Channel 1 is not an HT channel
Oct 18 20:38:54 creabox kernel: [ 5.865562] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.867068] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.868554] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_LINK_QUALITY_CMD (#4e), seq: 0x0919, 92 bytes at 25[25]:9
Oct 18 20:38:54 creabox kernel: [ 5.870153] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_LINK_QUALITY_CMD
Oct 18 20:38:54 creabox kernel: [ 5.871744] iwlwifi 0000:02:00.0: U iwl_send_lq_cmd init LQ command complete, clearing sta addition status for sta 15
Oct 18 20:38:54 creabox kernel: [ 5.873286] iwlwifi 0000:02:00.0: U iwl_restore_stations Restoring all known stations .... complete.
Oct 18 20:38:54 creabox kernel: [ 5.874850] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.876400] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.877918] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.879425] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.880933] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.882385] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.883823] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx enter
Oct 18 20:38:54 creabox kernel: [ 5.885238] iwlwifi 0000:02:00.0: U iwlagn_mac_conf_tx leave
Oct 18 20:38:54 creabox kernel: [ 5.886634] iwlwifi 0000:02:00.0: U iwlagn_update_qos send QoS cmd with Qos active=0 FLAGS=0x0
Oct 18 20:38:54 creabox kernel: [ 5.888052] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.889466] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.890870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_QOS_PARAM (#13), seq: 0x091A, 40 bytes at 26[26]:9
Oct 18 20:38:54 creabox kernel: [ 5.892327] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_QOS_PARAM
Oct 18 20:38:54 creabox kernel: [ 5.893783] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.895211] iwlwifi 0000:02:00.0: U iwlagn_mac_config enter: changed 0xffffffff
Oct 18 20:38:54 creabox kernel: [ 5.896598] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.897977] iwlwifi 0000:02:00.0: U iwlagn_set_rxon_chain rx_chain=0x2406 active=2 idle=1
Oct 18 20:38:54 creabox kernel: [ 5.899365] iwlwifi 0000:02:00.0: U iwl_power_sleep_cam_cmd Sleep command for CAM
Oct 18 20:38:54 creabox kernel: [ 5.900711] iwlwifi 0000:02:00.0: U iwlagn_mac_config TX Power old=0 new=15
Oct 18 20:38:54 creabox kernel: [ 5.902051] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.903457] iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.904798] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_TX_POWER_DBM_CMD (#95), seq: 0x091B, 8 bytes at 27[27]:9
Oct 18 20:38:54 creabox kernel: [ 5.906572] iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_POWER_DBM_CMD
Oct 18 20:38:54 creabox kernel: [ 5.908027] iwlwifi 0000:02:00.0: U iwlagn_mac_config leave
Oct 18 20:38:54 creabox kernel: [ 5.909432] iwlwifi 0000:02:00.0: U iwlagn_configure_filter Enter: changed: 0x0, total: 0x80000000
Oct 18 20:38:54 creabox kernel: [ 5.911058] iwlwifi 0000:02:00.0: U iwlagn_configure_filter Enter: changed: 0x0, total: 0x80000000
Oct 18 20:38:54 creabox kernel: [ 5.926627] device eth0 entered promiscuous mode
Oct 18 20:38:54 creabox kernel: [ 6.057953] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 6.163035] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
Oct 18 20:38:54 creabox kernel: [ 7.676129] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 18 20:38:54 creabox kernel: [ 7.679122] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Oct 18 20:38:54 creabox kernel: [ 7.681910] xen_bridge: port 1(eth0) entered forwarding state
Oct 18 20:38:54 creabox kernel: [ 7.684662] xen_bridge: port 1(eth0) entered forwarding state
Oct 18 20:38:54 creabox acpid: starting up with netlink and the input layer
Oct 18 20:38:54 creabox acpid: 1 rule loaded
Oct 18 20:38:54 creabox acpid: waiting for events: event logging is off
Oct 18 20:38:54 creabox /usr/sbin/cron[2897]: (CRON) INFO (pidfile fd = 3)
Oct 18 20:38:54 creabox /usr/sbin/cron[2912]: (CRON) STARTUP (fork ok)
Oct 18 20:38:54 creabox /usr/sbin/cron[2912]: (CRON) INFO (Running @reboot jobs)
Oct 18 20:39:52 creabox kernel: [ 65.980221] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091C, 8 bytes at 28[28]:9
Oct 18 20:39:52 creabox kernel: [ 65.980486] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:39:52 creabox kernel: [ 65.980649] iwlwifi 0000:02:00.0: U iwl_advance_tt_handler Temperature increase 10 degree Celsius
Oct 18 20:40:52 creabox kernel: [ 126.109405] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091D, 8 bytes at 29[29]:9
Oct 18 20:41:53 creabox kernel: [ 186.238563] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091E, 8 bytes at 30[30]:9
Oct 18 20:42:53 creabox kernel: [ 246.367716] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x091F, 8 bytes at 31[31]:9
Oct 18 20:42:53 creabox kernel: [ 246.367968] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:43:53 creabox kernel: [ 306.496878] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0920, 8 bytes at 32[0]:9
Oct 18 20:43:53 creabox kernel: [ 306.497128] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:44:53 creabox kernel: [ 366.626055] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0921, 8 bytes at 33[1]:9
Oct 18 20:44:53 creabox kernel: [ 366.626321] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:45:53 creabox kernel: [ 426.755213] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0922, 8 bytes at 34[2]:9
Oct 18 20:45:53 creabox kernel: [ 426.755494] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:46:53 creabox kernel: [ 486.884369] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0923, 8 bytes at 35[3]:9
Oct 18 20:46:53 creabox kernel: [ 486.886313] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:47:54 creabox kernel: [ 547.013528] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0924, 8 bytes at 36[4]:9
Oct 18 20:48:54 creabox kernel: [ 607.142678] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0925, 8 bytes at 37[5]:9
Oct 18 20:49:54 creabox kernel: [ 667.271836] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0926, 8 bytes at 38[6]:9
Oct 18 20:50:54 creabox kernel: [ 727.400996] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0927, 8 bytes at 39[7]:9
Oct 18 20:51:54 creabox kernel: [ 787.530149] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0928, 8 bytes at 40[8]:9
Oct 18 20:52:54 creabox kernel: [ 847.659322] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0929, 8 bytes at 41[9]:9
Oct 18 20:53:54 creabox kernel: [ 907.788475] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092A, 8 bytes at 42[10]:9
Oct 18 20:54:55 creabox kernel: [ 967.917629] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092B, 8 bytes at 43[11]:9
Oct 18 20:54:55 creabox kernel: [ 967.917907] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:55:55 creabox kernel: [ 1028.046789] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092C, 8 bytes at 44[12]:9
Oct 18 20:56:55 creabox kernel: [ 1088.175949] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092D, 8 bytes at 45[13]:9
Oct 18 20:56:55 creabox kernel: [ 1088.176204] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:57:55 creabox kernel: [ 1148.305122] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092E, 8 bytes at 46[14]:9
Oct 18 20:57:55 creabox kernel: [ 1148.305414] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:58:55 creabox kernel: [ 1208.434265] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x092F, 8 bytes at 47[15]:9
Oct 18 20:58:55 creabox kernel: [ 1208.434517] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 20:59:55 creabox kernel: [ 1268.563419] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0930, 8 bytes at 48[16]:9
Oct 18 21:00:56 creabox kernel: [ 1328.692582] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0931, 8 bytes at 49[17]:9
Oct 18 21:00:56 creabox kernel: [ 1328.692834] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:01:56 creabox kernel: [ 1388.821742] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0932, 8 bytes at 50[18]:9
Oct 18 21:01:56 creabox kernel: [ 1388.822019] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:02:56 creabox kernel: [ 1448.950898] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0933, 8 bytes at 51[19]:9
Oct 18 21:03:56 creabox kernel: [ 1509.080067] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0934, 8 bytes at 52[20]:9
Oct 18 21:04:56 creabox kernel: [ 1569.209217] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0935, 8 bytes at 53[21]:9
Oct 18 21:05:56 creabox kernel: [ 1629.338378] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0936, 8 bytes at 54[22]:9
Oct 18 21:06:57 creabox kernel: [ 1689.467536] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0937, 8 bytes at 55[23]:9
Oct 18 21:07:57 creabox kernel: [ 1749.596707] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0938, 8 bytes at 56[24]:9
Oct 18 21:08:57 creabox kernel: [ 1809.725852] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0939, 8 bytes at 57[25]:9
Oct 18 21:08:57 creabox kernel: [ 1809.726106] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:09:57 creabox kernel: [ 1869.855014] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093A, 8 bytes at 58[26]:9
Oct 18 21:10:57 creabox kernel: [ 1929.984169] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093B, 8 bytes at 59[27]:9
Oct 18 21:11:57 creabox kernel: [ 1990.113331] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093C, 8 bytes at 60[28]:9
Oct 18 21:12:58 creabox kernel: [ 2050.242462] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093D, 8 bytes at 61[29]:9
Oct 18 21:13:58 creabox kernel: [ 2110.371646] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093E, 8 bytes at 62[30]:9
Oct 18 21:14:58 creabox kernel: [ 2170.500780] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x093F, 8 bytes at 63[31]:9
Oct 18 21:15:58 creabox kernel: [ 2230.629964] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0940, 8 bytes at 64[0]:9
Oct 18 21:16:58 creabox kernel: [ 2290.759123] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0941, 8 bytes at 65[1]:9
Oct 18 21:17:01 creabox /USR/SBIN/CRON[3388]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 18 21:17:58 creabox kernel: [ 2350.888289] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0942, 8 bytes at 66[2]:9
Oct 18 21:18:58 creabox kernel: [ 2411.017442] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0943, 8 bytes at 67[3]:9
Oct 18 21:19:59 creabox kernel: [ 2471.146603] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0944, 8 bytes at 68[4]:9
Oct 18 21:20:59 creabox kernel: [ 2531.275758] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0945, 8 bytes at 69[5]:9
Oct 18 21:21:59 creabox kernel: [ 2591.404922] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0946, 8 bytes at 70[6]:9
Oct 18 21:22:59 creabox kernel: [ 2651.534078] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0947, 8 bytes at 71[7]:9
Oct 18 21:23:59 creabox kernel: [ 2711.663231] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0948, 8 bytes at 72[8]:9
Oct 18 21:23:59 creabox kernel: [ 2711.663474] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:24:59 creabox kernel: [ 2771.792396] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0949, 8 bytes at 73[9]:9
Oct 18 21:24:59 creabox kernel: [ 2771.792637] iwlwifi 0000:02:00.0: U iwl_tt_handler Queueing thermal throttling work.
Oct 18 21:26:00 creabox kernel: [ 2831.921569] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094A, 8 bytes at 74[10]:9
Oct 18 21:26:09 creabox kernel: [ 2840.946472] cfg80211: Pending regulatory request, waiting for it to be processed...
Oct 18 21:27:00 creabox kernel: [ 2892.050714] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094B, 8 bytes at 75[11]:9
Oct 18 21:28:00 creabox kernel: [ 2952.179870] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094C, 8 bytes at 76[12]:9
Oct 18 21:29:00 creabox kernel: [ 3012.309029] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094D, 8 bytes at 77[13]:9
Oct 18 21:30:00 creabox kernel: [ 3072.438189] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094E, 8 bytes at 78[14]:9
Oct 18 21:31:00 creabox kernel: [ 3132.567348] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x094F, 8 bytes at 79[15]:9
Oct 18 21:32:01 creabox kernel: [ 3192.696505] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0950, 8 bytes at 80[16]:9
Oct 18 21:33:01 creabox kernel: [ 3252.825666] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0951, 8 bytes at 81[17]:9
Oct 18 21:34:01 creabox kernel: [ 3312.954824] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0952, 8 bytes at 82[18]:9
Oct 18 21:35:01 creabox kernel: [ 3373.083990] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0953, 8 bytes at 83[19]:9
Oct 18 21:36:01 creabox kernel: [ 3433.213140] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0954, 8 bytes at 84[20]:9
Oct 18 21:37:01 creabox kernel: [ 3493.342299] iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command REPLY_STATISTICS_CMD (#9c), seq: 0x0955, 8 bytes at 85[21]:9
^ permalink raw reply related
* Re: pull-request: iwlwifi-fixes 2013-10-18
From: John W. Linville @ 2013-10-18 17:35 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless
In-Reply-To: <1382105527.14393.3.camel@jlt4.sipsolutions.net>
On Fri, Oct 18, 2013 at 04:12:07PM +0200, Johannes Berg wrote:
> John,
>
> Before you travel to Edinburgh, I hope to get in another pull request.
> Or maybe when you are there? :-)
>
> I have a few fixes for warnings/issues: one from Alex, fixing scan
> timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
> Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
> change from myself to try to recover when the device isn't processing
> commands quickly.
>
> Please let me know if there's any issue.
>
> johannes
>
>
> The following changes since commit 5a3e9f7f8c8768b5f7df81100c684e4cd00a6eb5:
>
> iwlwifi: mvm: call ieee80211_scan_completed when needed (2013-10-02 11:25:50 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes.git for-john
>
> for you to fetch changes up to f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d:
>
> iwlwifi: dvm: don't override mac80211's queue setting (2013-10-18 16:03:14 +0200)
Pulling now...
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox