* [PATCH 2/2] rsi: Device initialization sequence is changed
From: Prameela Rani Garnepudi @ 2016-10-21 10:10 UTC (permalink / raw)
To: linux-wireless
Cc: kvalo, johannes.berg, hofrat, xypron.glpk, prameela.garnepudi,
Prameela Rani Garnepudi
BT Co-ex support has been added in the firmware and hence BT, COEX queues are
introducted. To support the latest firmware queues, packet processing,
and initialization sequence is modified in the Host.
Common device configuration parameters (tx command frame) need to be send after
common card ready indication from the firmware. This frame contains information
about the driver mode, coex mode, protocols to support etc. Once it is sent,
then second level card ready indication comes for each protocol (WLAN, BT etc).
Currently host supports only WLAN mode. New command frames are added as part
of these changes.
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
---
drivers/net/wireless/rsi/rsi_91x_main.c | 14 +-
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 281 ++++++++++++++++++++++++----
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 39 +++-
drivers/net/wireless/rsi/rsi_91x_usb.c | 97 ++++++----
drivers/net/wireless/rsi/rsi_main.h | 49 ++++-
drivers/net/wireless/rsi/rsi_mgmt.h | 195 ++++++++++++++++---
drivers/net/wireless/rsi/rsi_usb.h | 1 +
7 files changed, 559 insertions(+), 117 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 8810862..ad725a4 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -121,11 +121,23 @@ int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len)
actual_length = *(u16 *)&frame_desc[0];
offset = *(u16 *)&frame_desc[2];
+ if ((actual_length < (4 + FRAME_DESC_SZ)) || (offset < 4)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: actual_length (%d) is less than 20 or"
+ " offset(%d) is less than 4\n",
+ __func__, actual_length, offset);
+ break;
+ }
queueno = rsi_get_queueno(frame_desc, offset);
length = rsi_get_length(frame_desc, offset);
- extended_desc = rsi_get_extended_desc(frame_desc, offset);
+ if (queueno == RSI_WIFI_DATA_Q || queueno == RSI_WIFI_MGMT_Q)
+ extended_desc = rsi_get_extended_desc(frame_desc,
+ offset);
switch (queueno) {
+ case RSI_COEX_Q:
+ rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+ break;
case RSI_WIFI_DATA_Q:
skb = rsi_prepare_skb(common,
(frame_desc + offset),
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index 7aec45a..1bffd7d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -18,6 +18,16 @@
#include "rsi_mgmt.h"
#include "rsi_common.h"
+struct rsi_config_vals dev_config_vals[] = {
+ {
+ .lp_ps_handshake = 0,
+ .ulp_ps_handshake = 0,
+ .sleep_config_params = 0,
+ .ext_pa_or_bt_coex_en = 0,
+ },
+};
+
+/* Bootup Parameters for 20MHz */
static struct bootup_params boot_params_20 = {
.magic_number = cpu_to_le16(0x5aa5),
.crystal_good_time = 0x0,
@@ -199,6 +209,39 @@ static struct bootup_params boot_params_40 = {
.dcdc_operation_mode = 0x0,
.soc_reset_wait_cnt = 0x0
};
+#define UNUSED_GPIO 1
+#define USED_GPIO 0
+struct rsi_ulp_gpio_vals unused_ulp_gpio_bitmap = {
+ .motion_sensor_gpio_ulp_wakeup = UNUSED_GPIO,
+ .sleep_ind_from_device = UNUSED_GPIO,
+ .ulp_gpio_2 = UNUSED_GPIO,
+ .push_button_ulp_wakeup = UNUSED_GPIO,
+};
+
+struct rsi_soc_gpio_vals unused_soc_gpio_bitmap = {
+ .pspi_csn_0 = USED_GPIO, //GPIO_0
+ .pspi_csn_1 = USED_GPIO, //GPIO_1
+ .host_wakeup_intr = UNUSED_GPIO, //GPIO_2
+ .pspi_data_0 = USED_GPIO, //GPIO_3
+ .pspi_data_1 = USED_GPIO, //GPIO_4
+ .pspi_data_2 = USED_GPIO, //GPIO_5
+ .pspi_data_3 = USED_GPIO, //GPIO_6
+ .i2c_scl = USED_GPIO, //GPIO_7
+ .i2c_sda = USED_GPIO, //GPIO_8
+ .uart1_rx = UNUSED_GPIO, //GPIO_9
+ .uart1_tx = UNUSED_GPIO, //GPIO_10
+ .uart1_rts_i2s_clk = UNUSED_GPIO, //GPIO_11
+ .uart1_cts_i2s_ws = UNUSED_GPIO, //GPIO_12
+ .dbg_uart_rx_i2s_din = UNUSED_GPIO, //GPIO_13
+ .dbg_uart_tx_i2s_dout = UNUSED_GPIO, //GPIO_14
+ .lp_wakeup_boot_bypass = UNUSED_GPIO, //GPIO_15
+ .led_0 = USED_GPIO, //GPIO_16
+ .btcoex_wlan_active_ext_pa_ant_sel_A = UNUSED_GPIO, //GPIO_17
+ .btcoex_bt_priority_ext_pa_ant_sel_B = UNUSED_GPIO, //GPIO_18
+ .btcoex_bt_active_ext_pa_on_off = UNUSED_GPIO, //GPIO_19
+ .rf_reset = USED_GPIO, //GPIO_20
+ .sleep_ind_from_device = UNUSED_GPIO,
+};
static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130};
@@ -218,6 +261,26 @@ static void rsi_set_default_parameters(struct rsi_common *common)
common->fsm_state = FSM_CARD_NOT_READY;
common->iface_down = true;
common->endpoint = EP_2GHZ_20MHZ;
+ common->driver_mode = 1; /* End-to-End Mode */
+#ifdef CONFIG_RSI_COEX
+ common->coex_mode = 4;
+#else
+ common->coex_mode = 1; /*Default coex mode is WIFI alone */
+#endif
+ common->oper_mode = 1;
+ common->ta_aggr = 0;
+ common->skip_fw_load = 0; /* Default disable skipping fw loading */
+ common->lp_ps_handshake_mode = 0; /* Default No HandShake mode*/
+ common->ulp_ps_handshake_mode = 2; /* Default PKT HandShake mode*/
+ common->rf_power_val = 0; /* Default 1.9V */
+ common->device_gpio_type = TA_GPIO; /* Default TA GPIO */
+ common->country_code = 840; /* Default US */
+ common->wlan_rf_power_mode = 0;
+ common->bt_rf_power_mode = 0;
+ common->obm_ant_sel_val = 2;
+ common->antenna_diversity = 0;
+ common->tx_power = RSI_TXPOWER_MAX;
+
}
/**
@@ -301,10 +364,11 @@ static int rsi_load_radio_caps(struct rsi_common *common)
radio_caps = (struct rsi_radio_caps *)skb->data;
radio_caps->desc_word[1] = cpu_to_le16(RADIO_CAPABILITIES);
- radio_caps->desc_word[4] = cpu_to_le16(RSI_RF_TYPE << 8);
+ radio_caps->desc_word[4] = cpu_to_le16(common->channel);
+ radio_caps->desc_word[4] |= cpu_to_le16(RSI_RF_TYPE << 8);
+ radio_caps->desc_word[7] |= cpu_to_le16(RSI_LMAC_CLOCK_80MHZ);
if (common->channel_width == BW_40MHZ) {
- radio_caps->desc_word[7] |= cpu_to_le16(RSI_LMAC_CLOCK_80MHZ);
radio_caps->desc_word[7] |= cpu_to_le16(RSI_ENABLE_40MHZ);
if (common->fsm_state == FSM_MAC_INIT_DONE) {
@@ -345,7 +409,7 @@ static int rsi_load_radio_caps(struct rsi_common *common)
radio_caps->qos_params[ii].txop_q = 0;
}
- for (ii = 0; ii < MAX_HW_QUEUES - 4; ii++) {
+ for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
radio_caps->qos_params[ii].cont_win_min_q =
cpu_to_le16(common->edca_params[ii].cw_min);
radio_caps->qos_params[ii].cont_win_max_q =
@@ -356,6 +420,10 @@ static int rsi_load_radio_caps(struct rsi_common *common)
cpu_to_le16(common->edca_params[ii].txop);
}
+ radio_caps->qos_params[BROADCAST_HW_Q].txop_q = 0xffff;
+ radio_caps->qos_params[MGMT_HW_Q].txop_q = 0;
+ radio_caps->qos_params[BEACON_HW_Q].txop_q = 0xffff;
+
memcpy(&common->rate_pwr[0], &gc[0], 40);
for (ii = 0; ii < 20; ii++)
radio_caps->gcpd_per_rate[inx++] =
@@ -469,7 +537,7 @@ static int rsi_hal_send_sta_notify_frame(struct rsi_common *common,
memset(skb->data, 0, sizeof(struct rsi_peer_notify));
peer_notify = (struct rsi_peer_notify *)skb->data;
- peer_notify->command = cpu_to_le16(opmode << 1);
+ peer_notify->command = 0;
switch (notify_event) {
case STA_CONNECTED:
@@ -499,7 +567,6 @@ static int rsi_hal_send_sta_notify_frame(struct rsi_common *common,
if (!status && qos_enable) {
rsi_set_contention_vals(common);
- status = rsi_load_radio_caps(common);
}
return status;
}
@@ -595,6 +662,7 @@ static int rsi_program_bb_rf(struct rsi_common *common)
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
mgmt_frame->desc_word[1] = cpu_to_le16(BBP_PROG_IN_TA);
mgmt_frame->desc_word[4] = cpu_to_le16(common->endpoint);
+ mgmt_frame->desc_word[3] = cpu_to_le16(common->rf_pwr_mode);
if (common->rf_reset) {
mgmt_frame->desc_word[7] = cpu_to_le16(RF_RESET_ENABLE);
@@ -752,6 +820,53 @@ int rsi_hal_load_key(struct rsi_common *common,
return rsi_send_internal_mgmt_frame(common, skb);
}
+/**
+ * rsi_send_common_dev_params() - This function send the common device
+ * configuration parameters to device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_send_common_dev_params(struct rsi_common *common)
+{
+ struct sk_buff *skb = NULL;
+ u32 *soc_gpio, len;
+ u16 *frame, *ulp_gpio, *desc;
+
+ len = 0x20;
+
+ skb = dev_alloc_skb(len + FRAME_DESC_SZ);
+ if (!skb)
+ return -ENOMEM;
+ memset(skb->data, 0, len + FRAME_DESC_SZ);
+
+ desc = (u16 *)&skb->data[0];
+ frame = (u16 *)&skb->data[FRAME_DESC_SZ];
+
+ desc[0] = cpu_to_le16(len | (RSI_COEX_Q << 12));
+ desc[1] = cpu_to_le16(COMMON_DEV_CONFIG);
+
+ frame[0] = (u16)common->lp_ps_handshake_mode;
+ frame[0] |= (u16)common->ulp_ps_handshake_mode << 8;
+
+ ulp_gpio = (u16 *)&unused_ulp_gpio_bitmap;
+ soc_gpio = (u32 *)&unused_soc_gpio_bitmap;
+
+ frame[1] |= (*ulp_gpio) << 8;
+ *(u32 *)&frame[2] = *soc_gpio;
+ frame[4] |= ((u16)common->oper_mode << 8);
+ frame[5] |= ((u16)common->wlan_rf_power_mode);
+ frame[5] |= ((u16)common->bt_rf_power_mode << 8);
+ frame[6] |= ((u16)common->driver_mode << 8);
+ frame[7] = 3; //((u16 )d_assets->region_code);
+ frame[7] |= ((u16)common->obm_ant_sel_val << 8);
+
+ skb_put(skb, len + FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+
/*
* rsi_load_bootup_params() - This function send bootup params to the firmware.
* @common: Pointer to the driver private structure.
@@ -1140,6 +1255,7 @@ void rsi_inform_bss_status(struct rsi_common *common,
u16 aid)
{
if (status) {
+ common->hw_data_qs_blocked = true;
rsi_hal_send_sta_notify_frame(common,
RSI_IFTYPE_STATION,
STA_CONNECTED,
@@ -1148,13 +1264,17 @@ void rsi_inform_bss_status(struct rsi_common *common,
aid);
if (common->min_rate == 0xffff)
rsi_send_auto_rate_request(common);
+ if (!rsi_send_block_unblock_frame(common, false))
+ common->hw_data_qs_blocked = false;
} else {
+ common->hw_data_qs_blocked = true;
rsi_hal_send_sta_notify_frame(common,
RSI_IFTYPE_STATION,
STA_DISCONNECTED,
bssid,
qos_enable,
aid);
+ rsi_send_block_unblock_frame(common, true);
}
}
@@ -1168,6 +1288,7 @@ void rsi_inform_bss_status(struct rsi_common *common,
static int rsi_eeprom_read(struct rsi_common *common)
{
struct rsi_mac_frame *mgmt_frame;
+ struct rsi_hw *adapter = common->priv;
struct sk_buff *skb;
rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__);
@@ -1183,15 +1304,16 @@ static int rsi_eeprom_read(struct rsi_common *common)
mgmt_frame = (struct rsi_mac_frame *)skb->data;
/* FrameType */
- mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+ mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ);
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
/* Number of bytes to read */
- mgmt_frame->desc_word[3] = cpu_to_le16(ETH_ALEN +
- WLAN_MAC_MAGIC_WORD_LEN +
- WLAN_HOST_MODE_LEN +
- WLAN_FW_VERSION_LEN);
+ mgmt_frame->desc_word[3] = cpu_to_le16(adapter->eeprom.length << 4);
+ mgmt_frame->desc_word[2] |= cpu_to_le16(3 << 8);
+
/* Address to read */
- mgmt_frame->desc_word[4] = cpu_to_le16(WLAN_MAC_EEPROM_ADDR);
+ mgmt_frame->desc_word[4] = cpu_to_le16(adapter->eeprom.offset);
+ mgmt_frame->desc_word[5] = cpu_to_le16(adapter->eeprom.offset >> 16);
+ mgmt_frame->desc_word[6] = cpu_to_le16(0); //delay = 0
skb_put(skb, FRAME_DESC_SZ);
@@ -1225,13 +1347,16 @@ int rsi_send_block_unblock_frame(struct rsi_common *common, bool block_event)
mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
mgmt_frame->desc_word[1] = cpu_to_le16(BLOCK_HW_QUEUE);
+ mgmt_frame->desc_word[3] = cpu_to_le16(0x1);
if (block_event) {
rsi_dbg(INFO_ZONE, "blocking the data qs\n");
mgmt_frame->desc_word[4] = cpu_to_le16(0xf);
+ mgmt_frame->desc_word[4] |= cpu_to_le16(0xf << 4);
} else {
rsi_dbg(INFO_ZONE, "unblocking the data qs\n");
mgmt_frame->desc_word[5] = cpu_to_le16(0xf);
+ mgmt_frame->desc_word[5] |= cpu_to_le16(0xf << 4);
}
skb_put(skb, FRAME_DESC_SZ);
@@ -1262,7 +1387,7 @@ int rsi_flash_read(struct rsi_hw *adapter)
cmd_frame = (struct rsi_mac_frame *)skb->data;
/* FrameType */
- cmd_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+ cmd_frame->desc_word[1] = cpu_to_le16(EEPROM_READ);
/* Format of length and offset differs for
* autoflashing and swbl flashing
@@ -1300,13 +1425,36 @@ int rsi_flash_read(struct rsi_hw *adapter)
static int rsi_handle_ta_confirm_type(struct rsi_common *common,
u8 *msg)
{
+ struct rsi_hw *adapter = common->priv;
u8 sub_type = (msg[15] & 0xff);
switch (sub_type) {
+ case COMMON_DEV_CONFIG:
+ rsi_dbg(FSM_ZONE,
+ "Common Dev Config params confirm received\n");
+ if (common->fsm_state == FSM_COMMON_DEV_PARAMS_SENT) {
+ if (rsi_load_bootup_params(common)) {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ goto out;
+ } else {
+ common->fsm_state = FSM_BOOT_PARAMS_SENT;
+ }
+ } else {
+ rsi_dbg(INFO_ZONE,
+ "%s: Received common dev config params cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
case BOOTUP_PARAMS_REQUEST:
rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n",
__func__);
if (common->fsm_state == FSM_BOOT_PARAMS_SENT) {
+ adapter->eeprom.length = (IEEE80211_ADDR_LEN +
+ WLAN_MAC_MAGIC_WORD_LEN +
+ WLAN_HOST_MODE_LEN);
+ adapter->eeprom.offset = WLAN_MAC_EEPROM_ADDR;
if (rsi_eeprom_read(common)) {
common->fsm_state = FSM_CARD_NOT_READY;
goto out;
@@ -1321,18 +1469,59 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common,
}
break;
- case EEPROM_READ_TYPE:
+ case EEPROM_READ:
+ rsi_dbg(FSM_ZONE, "EEPROM READ confirm received\n");
if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) {
+ u32 msg_len = ((u16 *)msg)[0] & 0xfff;
+
+ if (msg_len <= 0) {
+ rsi_dbg(FSM_ZONE,
+ "%s: [EEPROM_READ] Invalid len %d\n",
+ __func__, msg_len);
+ goto out;
+ }
if (msg[16] == MAGIC_WORD) {
u8 offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN
+ WLAN_MAC_MAGIC_WORD_LEN);
memcpy(common->mac_addr,
&msg[offset],
ETH_ALEN);
- memcpy(&common->fw_ver,
- &msg[offset + ETH_ALEN],
- sizeof(struct version_info));
+ adapter->eeprom.length =
+ ((WLAN_MAC_MAGIC_WORD_LEN + 3) & (~3));
+ adapter->eeprom.offset =
+ WLAN_EEPROM_RFTYPE_ADDR;
+ if (rsi_eeprom_read(common)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed reading RF band\n",
+ __func__);
+ common->fsm_state = FSM_CARD_NOT_READY;
+ } else {
+ common->fsm_state =
+ FSM_EEPROM_READ_RF_TYPE;
+ }
+ } else {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ break;
+ }
+ } else if (common->fsm_state == FSM_EEPROM_READ_RF_TYPE) {
+ u32 msg_len = ((u16 *)msg)[0] & 0xfff;
+ if (msg_len <= 0) {
+ rsi_dbg(FSM_ZONE,
+ "%s:[EEPROM_READ_CFM] Invalid len %d\n",
+ __func__, msg_len);
+ goto out;
+ }
+ if (msg[16] == MAGIC_WORD) {
+ if ((msg[17] & 0x3) == 0x3) {
+ rsi_dbg(INIT_ZONE,
+ "Dual band supported\n");
+ common->band = NL80211_BAND_5GHZ;
+ } else if ((msg[17] & 0x3) == 0x1) {
+ rsi_dbg(INIT_ZONE,
+ "Only 2.4Ghz band supported\n");
+ common->band = NL80211_BAND_2GHZ;
+ }
} else {
common->fsm_state = FSM_CARD_NOT_READY;
break;
@@ -1415,6 +1604,40 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common,
}
/**
+ * rsi_handle_card_ready() - This function handles the card ready
+ * indication from firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_handle_card_ready(struct rsi_common *common)
+{
+ switch (common->fsm_state) {
+ case FSM_CARD_NOT_READY:
+ rsi_set_default_parameters(common);
+ if (rsi_send_common_dev_params(common) < 0)
+ return -EINVAL;
+ common->fsm_state = FSM_COMMON_DEV_PARAMS_SENT;
+ break;
+ case FSM_COMMON_DEV_PARAMS_SENT:
+ rsi_dbg(FSM_ZONE, "Card ready indication from wlan.\n");
+ if (rsi_load_bootup_params(common)) {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ return -EINVAL;
+ }
+ common->fsm_state = FSM_BOOT_PARAMS_SENT;
+ break;
+ default:
+ rsi_dbg(ERR_ZONE,
+ "%s: card ready indication in invalid state %d.\n",
+ __func__, common->fsm_state);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
* rsi_mgmt_pkt_recv() - This function processes the management packets
* recieved from the hardware.
* @common: Pointer to the driver private structure.
@@ -1426,34 +1649,26 @@ int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
{
s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff);
u16 msg_type = (msg[2]);
- int ret;
rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n",
__func__, msg_len, msg_type);
- if (msg_type == TA_CONFIRM_TYPE) {
+ switch (msg_type) {
+ case TA_CONFIRM_TYPE:
return rsi_handle_ta_confirm_type(common, msg);
- } else if (msg_type == CARD_READY_IND) {
- rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n",
- __func__);
- if (common->fsm_state == FSM_CARD_NOT_READY) {
- rsi_set_default_parameters(common);
- ret = rsi_load_bootup_params(common);
- if (ret)
- return ret;
- else
- common->fsm_state = FSM_BOOT_PARAMS_SENT;
- } else {
- return -EINVAL;
- }
- } else if (msg_type == TX_STATUS_IND) {
+ case CARD_READY_IND:
+ return rsi_handle_card_ready(common);
+
+ case TX_STATUS_IND:
if (msg[15] == PROBEREQ_CONFIRM) {
common->mgmt_q_block = false;
rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
__func__);
}
- } else {
+ break;
+
+ default:
return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type);
}
return 0;
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
index c54a534..ad399b5 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -74,17 +74,36 @@ static int rsi_process_pkt(struct rsi_common *common)
u8 num_blks = 0;
u32 rcv_pkt_len = 0;
int status = 0;
+ u8 value = 0;
+ u8 protocol = 0, unaggr_pkt = 0;
+
+#define COEX_PKT 0
+#define WLAN_PKT 3
+#define ZIGB_PKT 1
+#define BT_PKT 2
+ num_blks = ((adapter->interrupt_status & 1) |
+ ((adapter->interrupt_status >> 4) << 1));
+
+ if (!num_blks) {
+ status = rsi_sdio_read_register(adapter,
+ SDIO_RX_NUM_BLOCKS_REG,
+ &value);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read pkt length from the card:\n",
+ __func__);
+ return status;
+ }
- status = rsi_sdio_read_register(adapter,
- SDIO_RX_NUM_BLOCKS_REG,
- &num_blks);
-
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to read pkt length from the card:\n",
- __func__);
- return status;
+ protocol = value >> 5;
+ num_blks = value & 0x1f;
+ } else {
+ protocol = WLAN_PKT;
}
+
+ if (protocol == BT_PKT || protocol == ZIGB_PKT) //unaggr_pkt FIXME
+ unaggr_pkt = 1;
+
rcv_pkt_len = (num_blks * 256);
common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
@@ -233,6 +252,8 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
mutex_unlock(&common->tx_rxlock);
return;
}
+ adapter->interrupt_status = isr_status;
+ isr_status &= 0xE;
rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
__func__, isr_status, (1 << MSDU_PKT_PENDING),
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 84ca609..63104bb 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -41,19 +41,25 @@ static struct rsi_host_intf_ops usb_host_intf_ops = {
* Return: status: 0 on success, a negative error code on failure.
*/
static int rsi_usb_card_write(struct rsi_hw *adapter,
- void *buf,
+ u8 *buf,
u16 len,
- u8 endpoint)
+ u32 endpoint)
{
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
- int status;
- s32 transfer;
+ int status = 0;
+ u8 *seg = dev->tx_buffer;
+ int transfer = 0;
+ int ep = dev->bulkout_endpoint_addr[endpoint - 1];
+
+ memset(seg, 0, len + 128);
+ memcpy(seg + 128, buf, len);
+ len += 128;
+ transfer = len;
status = usb_bulk_msg(dev->usbdev,
- usb_sndbulkpipe(dev->usbdev,
- dev->bulkout_endpoint_addr[endpoint - 1]),
- buf,
- len,
+ usb_sndbulkpipe(dev->usbdev, ep),
+ (void *)seg,
+ (int)len,
&transfer,
HZ * 5);
@@ -61,7 +67,11 @@ static int rsi_usb_card_write(struct rsi_hw *adapter,
rsi_dbg(ERR_ZONE,
"Card write failed with error code :%10d\n", status);
dev->write_fail = 1;
+ goto fail;
}
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sent Message successfully\n", __func__);
+
+fail:
return status;
}
@@ -76,27 +86,23 @@ static int rsi_usb_card_write(struct rsi_hw *adapter,
* Return: 0 on success, a negative error code on failure.
*/
static int rsi_write_multiple(struct rsi_hw *adapter,
- u8 endpoint,
+ u32 addr,
u8 *data,
u32 count)
{
- struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
- u8 *seg = dev->tx_buffer;
-
- if (dev->write_fail)
- return 0;
+ struct rsi_91x_usbdev *dev =
+ (struct rsi_91x_usbdev *)adapter->rsi_dev;
- if (endpoint == MGMT_EP) {
- memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
- memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
- } else {
- seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
+ if (!adapter || addr == 0) {
+ rsi_dbg(INFO_ZONE,
+ "%s: Unable to write to card\n", __func__);
+ return -1;
}
- return rsi_usb_card_write(adapter,
- seg,
- count + RSI_USB_TX_HEAD_ROOM,
- endpoint);
+ if (dev->write_fail)
+ return -1;
+
+ return rsi_usb_card_write(adapter, data, count, addr);
}
/**
@@ -259,6 +265,11 @@ static void rsi_rx_done_handler(struct urb *urb)
if (urb->status)
return;
+ if (urb->actual_length <= 0) {
+ rsi_dbg(INFO_ZONE, "%s: Zero length packet\n", __func__);
+ return;
+ }
+
rsi_set_event(&dev->rx_thread.event);
}
@@ -386,15 +397,16 @@ int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
rsi_dbg(ERR_ZONE,
"Reg write failed with error code :%d\n",
status);
- } else {
- count -= transfer;
- data += transfer;
- addr += transfer;
+ kfree(buf);
+ return status;
}
+ count -= transfer;
+ data += transfer;
+ addr += transfer;
}
kfree(buf);
- return 0;
+ return status;
}
/**
@@ -410,10 +422,12 @@ int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
u8 *pkt,
u32 len)
{
- u32 queueno = ((pkt[1] >> 4) & 0xf);
+ u32 queueno = ((pkt[1] >> 4) & 0x7);
u8 endpoint;
- endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);
+ endpoint = ((queueno == RSI_WIFI_MGMT_Q || queueno == RSI_COEX_Q ||
+ queueno == RSI_WIFI_DATA_Q) ?
+ MGMT_EP : DATA_EP);
return rsi_write_multiple(adapter,
endpoint,
@@ -500,7 +514,7 @@ static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
rsi_kill_thread(&dev->rx_thread);
usb_free_urb(dev->rx_usb_urb[0]);
kfree(adapter->priv->rx_data_pkt);
- kfree(dev->tx_buffer);
+ kfree(dev->saved_tx_buffer);
}
/**
@@ -516,6 +530,7 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
struct rsi_91x_usbdev *rsi_dev;
struct rsi_common *common = adapter->priv;
int status;
+ u8 dword_align_bytes = 0;
rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
if (!rsi_dev)
@@ -530,18 +545,29 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
adapter->device = &pfunction->dev;
usb_set_intfdata(pfunction, adapter);
- common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
+ common->rx_data_pkt = kmalloc(2000 * 4, GFP_KERNEL | GFP_DMA);
if (!common->rx_data_pkt) {
rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
__func__);
return -ENOMEM;
}
+ common->saved_rx_data_pkt = common->rx_data_pkt;
+ dword_align_bytes = (u32)common->rx_data_pkt & 0x3f;
+ if (dword_align_bytes)
+ common->rx_data_pkt = common->rx_data_pkt +
+ (64 - dword_align_bytes);
rsi_dev->tx_buffer = kmalloc(2048, GFP_KERNEL);
if (!rsi_dev->tx_buffer) {
status = -ENOMEM;
goto fail_tx;
}
+ rsi_dev->saved_tx_buffer = rsi_dev->tx_buffer;
+ dword_align_bytes = (u32)rsi_dev->tx_buffer & 0x3f;
+ if (dword_align_bytes)
+ rsi_dev->tx_buffer = rsi_dev->tx_buffer +
+ (64 - dword_align_bytes);
+
rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
if (!rsi_dev->rx_usb_urb[0]) {
status = -ENOMEM;
@@ -549,6 +575,7 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
}
rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
rsi_dev->tx_blk_size = 252;
+ adapter->tx_blk_size = rsi_dev->tx_blk_size;
/* Initializing function callbacks */
adapter->rx_urb_submit = rsi_rx_urb_submit;
@@ -575,9 +602,9 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
fail_thread:
usb_free_urb(rsi_dev->rx_usb_urb[0]);
fail_rx:
- kfree(rsi_dev->tx_buffer);
+ kfree(rsi_dev->saved_tx_buffer);
fail_tx:
- kfree(common->rx_data_pkt);
+ kfree(common->saved_rx_data_pkt);
return status;
}
@@ -595,7 +622,7 @@ static int rsi_probe(struct usb_interface *pfunction,
{
struct rsi_hw *adapter;
struct rsi_91x_usbdev *dev;
- u32 fw_status;
+ u32 fw_status = 0;
int status;
rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index 752c429..49e9fdf 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -32,12 +32,14 @@
#define ISR_ZONE BIT(8) /* For Interrupt Msgs */
#define FSM_CARD_NOT_READY 0
-#define FSM_BOOT_PARAMS_SENT 1
-#define FSM_EEPROM_READ_MAC_ADDR 2
-#define FSM_RESET_MAC_SENT 3
-#define FSM_RADIO_CAPS_SENT 4
-#define FSM_BB_RF_PROG_SENT 5
-#define FSM_MAC_INIT_DONE 6
+#define FSM_COMMON_DEV_PARAMS_SENT 1
+#define FSM_BOOT_PARAMS_SENT 2
+#define FSM_EEPROM_READ_MAC_ADDR 3
+#define FSM_EEPROM_READ_RF_TYPE 4
+#define FSM_RESET_MAC_SENT 5
+#define FSM_RADIO_CAPS_SENT 6
+#define FSM_BB_RF_PROG_SENT 7
+#define FSM_MAC_INIT_DONE 8
extern u32 rsi_zone_enabled;
extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
@@ -54,12 +56,23 @@ extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
#define MAC_80211_HDR_FRAME_CONTROL 0
#define WME_NUM_AC 4
#define NUM_SOFT_QUEUES 5
-#define MAX_HW_QUEUES 8
+#define MAX_HW_QUEUES 12
#define INVALID_QUEUE 0xff
#define MAX_CONTINUOUS_VO_PKTS 8
#define MAX_CONTINUOUS_VI_PKTS 4
+#define MGMT_HW_Q 10 /* Queue No 10 is used for
+ * MGMT_QUEUE in Device FW,
+ * Hence this is Reserved
+ */
+#define BROADCAST_HW_Q 9
+#define BEACON_HW_Q 11
+#define MAX_NUM_SCAN_BGCHANS 24
/* Queue information */
+#define RSI_COEX_Q 0x0
+#define RSI_ZIGB_Q 0x1
+#define RSI_BT_Q 0x2
+#define RSI_WLAN_Q 0x3
#define RSI_WIFI_MGMT_Q 0x4
#define RSI_WIFI_DATA_Q 0x5
#define IEEE80211_MGMT_FRAME 0x00
@@ -190,6 +203,7 @@ struct rsi_common {
/* Generic */
u8 channel;
u8 *rx_data_pkt;
+ u8 *saved_rx_data_pkt;
u8 mac_id;
u8 radio_id;
u16 rate_pwr[20];
@@ -204,8 +218,27 @@ struct rsi_common {
struct cqm_info cqm_info;
bool hw_data_qs_blocked;
-
+ u8 driver_mode;
u8 coex_mode;
+ u8 oper_mode;
+ u8 ta_aggr;
+ u8 skip_fw_load;
+ u8 lp_ps_handshake_mode;
+ u8 ulp_ps_handshake_mode;
+ u8 uapsd_bitmap;
+ u8 rf_power_val;
+ u8 device_gpio_type;
+ u16 country_code;
+ u8 wlan_rf_power_mode;
+ u8 bt_rf_power_mode;
+ u8 obm_ant_sel_val;
+ u8 antenna_diversity;
+ u16 rf_pwr_mode;
+ char antenna_gain[2];
+ u8 host_wakeup_intr_enable;
+ u8 host_wakeup_intr_active_high;
+ int tx_power;
+ u8 ant_in_use;
};
enum host_intf {
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index f8823126..b0bbb5a 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -43,13 +43,32 @@
#define WLAN_HOST_MODE_LEN 0x04
#define WLAN_FW_VERSION_LEN 0x08
#define MAGIC_WORD 0x5A
+#define WLAN_EEPROM_RFTYPE_ADDR 424
/* Receive Frame Types */
-#define TA_CONFIRM_TYPE 0x01
-#define RX_DOT11_MGMT 0x02
-#define TX_STATUS_IND 0x04
+enum rx_cmd_type {
+ CARD_READY_IND = 0x0,
+ TA_CONFIRM_TYPE = 0x01,
+ RX_DOT11_MGMT = 0x02,
+ RX_DOT11_DATA = 0x03,
+ TX_STATUS_IND = 0x04,
+ PS_NOTIFY_IND = 0x05,
+ SLEEP_NOTIFY_IND = 0x06,
+ DECRYPT_ERROR_IND = 0x07,
+ BEACON_EVENT_IND = 0x08,
+ DEBUG_IND = 0x09,
+ RX_MISC_IND = 0xa,
+ UNCONNECTED_PEER = 0xb,
+ HW_BMISS_EVENT = 0xc,
+ RATE_GC_TABLE_UPDATE = 0xd,
+ RADAR_DETECTED = 0x0e,
+ TSF_SYNC_CONFIRM = 0xc0,
+ ANTENNA_SELECT = 0xf,
+};
+
+#define EAPOL4_CONFIRM 1
#define PROBEREQ_CONFIRM 2
-#define CARD_READY_IND 0x00
+#define NULLDATA_CONFIRM 3
#define RSI_DELETE_PEER 0x0
#define RSI_ADD_PEER 0x1
@@ -62,6 +81,7 @@
#define RF_RESET_ENABLE BIT(3)
#define RATE_INFO_ENABLE BIT(0)
#define RSI_BROADCAST_PKT BIT(9)
+#define RSI_DESC_11G_MODE BIT(7)
#define RSI_DESC_REQUIRE_CFM_TO_HOST BIT(10)
#define UPPER_20_ENABLE (0x2 << 12)
@@ -75,7 +95,7 @@
#define RX_BA_INDICATION 1
#define RSI_TBL_SZ 40
#define MAX_RETRIES 8
-#define RSI_IFTYPE_STATION 0
+#define RSI_IFTYPE_STATION 1
#define STD_RATE_MCS7 0x07
#define STD_RATE_MCS6 0x06
@@ -141,6 +161,44 @@
#define RSI_SUPP_FILTERS (FIF_ALLMULTI | FIF_PROBE_REQ |\
FIF_BCN_PRBRESP_PROMISC)
+
+/* Power save handshake types */
+#define NO_HAND_SHAKE 0
+#define GPIO_HAND_SHAKE 1
+#define PACKET_HAND_SHAKE 2
+#define TA_GPIO 0
+#define ULP_GPIO 1
+#define RF_POWER_3_3 1
+#define RF_POWER_1_9 0
+
+/* Rx filter word definitions */
+#define PROMISCOUS_MODE BIT(0)
+#define ALLOW_DATA_ASSOC_PEER BIT(1)
+#define ALLOW_MGMT_ASSOC_PEER BIT(2)
+#define ALLOW_CTRL_ASSOC_PEER BIT(3)
+#define DISALLOW_BEACONS BIT(4)
+#define ALLOW_CONN_PEER_MGMT_WHILE_BUF_FULL BIT(5)
+#define DISALLOW_BROADCAST_DATA BIT(6)
+
+#define RSI_TXPOWER_MAX 30
+#define RSI_TXPOWER_MIN -127
+
+#define DEEP_SLEEP 1
+#define CONNECTED_SLEEP 2
+
+#define SLEEP_REQUEST 1
+#define WAKEUP_REQUEST 2
+
+#define RSI_TXPOWER_MAX 30
+#define RSI_TXPOWER_MIN -127
+
+#define IEEE80211_MARKALL_UAPSD_QUEUES \
+ (IEEE80211_WMM_IE_STA_QOSINFO_AC_VO | \
+ IEEE80211_WMM_IE_STA_QOSINFO_AC_VI | \
+ IEEE80211_WMM_IE_STA_QOSINFO_AC_BE | \
+ IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+#define IEEE80211_STA_SP_ALL_PKTS 0x00
+
enum opmode {
STA_OPMODE = 1,
AP_OPMODE = 2
@@ -160,32 +218,51 @@ enum sta_notify_events {
/* Send Frames Types */
enum cmd_frame_type {
- TX_DOT11_MGMT,
- RESET_MAC_REQ,
- RADIO_CAPABILITIES,
- BB_PROG_VALUES_REQUEST,
- RF_PROG_VALUES_REQUEST,
- WAKEUP_SLEEP_REQUEST,
- SCAN_REQUEST,
- TSF_UPDATE,
- PEER_NOTIFY,
- BLOCK_HW_QUEUE,
- SET_KEY_REQ,
- AUTO_RATE_IND,
- BOOTUP_PARAMS_REQUEST,
- VAP_CAPABILITIES,
- EEPROM_READ_TYPE ,
- EEPROM_WRITE,
- GPIO_PIN_CONFIG ,
- SET_RX_FILTER,
- AMPDU_IND,
- STATS_REQUEST_FRAME,
- BB_BUF_PROG_VALUES_REQ,
- BBP_PROG_IN_TA,
- BG_SCAN_PARAMS,
- BG_SCAN_PROBE_REQ,
- CW_MODE_REQ,
- PER_CMD_PKT
+ TX_DOT11_MGMT = 0,
+ RESET_MAC_REQ, /* 0x1 */
+ RADIO_CAPABILITIES, /* 0x2 */
+ BB_PROG_VALUES_REQUEST, /* 0x3 */
+ RF_PROG_VALUES_REQUEST, /* 0x4 */
+ WAKEUP_SLEEP_REQUEST, /* 0x5 */
+ SCAN_REQUEST, /* 0x6 */
+ TSF_UPDATE, /* 0x7 */
+ PEER_NOTIFY, /* 0x8 */
+ BLOCK_HW_QUEUE, /* 0x9 */
+ SET_KEY_REQ, /* 0xA */
+ AUTO_RATE_IND, /* 0xB */
+ BOOTUP_PARAMS_REQUEST, /* 0xC */
+ VAP_CAPABILITIES, /* 0xD */
+ EEPROM_READ, /* 0xE */
+ EEPROM_WRITE, /* 0xF */
+ GPIO_PIN_CONFIG, /* 0x10 */
+ SET_RX_FILTER, /* 0x11 */
+ AMPDU_IND, /* 0x12 */
+ STATS_REQUEST, /* 0x13 */
+ BB_BUF_PROG_VALUES_REQ, /* 0x14 */
+ BBP_PROG_IN_TA, /* 0x15 */
+ BG_SCAN_PARAMS, /* 0x16 */
+ BG_SCAN_PROBE_REQ, /* 0x17 */
+ CW_MODE_REQ, /* 0x18 */
+ PER_CMD_PKT, /* 0x19 */
+ DEV_SLEEP_REQUEST, /* 0x1A */
+ DEV_WAKEUP_CNF, /* 0x1B */
+ RF_LOOPBACK_REQ, /* 0x1C */
+ RF_LPBK_M3, /* 0x1D */
+ RF_RESET_FRAME, /* 0x1E */
+ LMAC_REG_OPS, /* 0x1F */
+ ANT_SEL_FRAME, /* 0x20 */
+ CONFIRM, /* 0x21 */
+ WLAN_DE_REGISTER, /* 0x22 */
+ DEBUG_FRAME, /* 0x23 */
+ HW_BMISS_HANDLE, /* 0x24 */
+ MULTICAST_ENABLE, /* 0x25 */
+ TX_MISC_IND, /* 0x26 */
+ VAP_DYNAMIC_UPDATE, /* 0x27 */
+ COMMON_DEV_CONFIG, /* 0x28 */
+ RADIO_PARAMS_UPDATE, /* 0x29 */
+ RADAR_REQUEST, /* 0x2A */
+ WOWLAN_CONFIG_PARAMS, /* 2B */
+ IAP_CONFIG, /* 0x2C */
};
struct rsi_mac_frame {
@@ -220,6 +297,7 @@ struct rsi_vap_caps {
__le32 default_data_rate;
__le16 beacon_interval;
__le16 dtim_period;
+ __le16 beacon_miss_threshold;
} __packed;
struct rsi_set_key {
@@ -262,6 +340,61 @@ struct rsi_radio_caps {
__le16 preamble_type;
} __packed;
+struct rsi_ulp_gpio_vals {
+ u8 motion_sensor_gpio_ulp_wakeup : 1;
+ u8 sleep_ind_from_device : 1;
+ u8 ulp_gpio_2 :1;
+ u8 push_button_ulp_wakeup : 1;
+ u8 reserved : 4;
+} __packed;
+
+struct rsi_soc_gpio_vals {
+ u32 pspi_csn_0 : 1;
+ u32 pspi_csn_1 : 1;
+ u32 host_wakeup_intr :1;
+ u32 pspi_data_0 : 1;
+ u32 pspi_data_1 : 1;
+ u32 pspi_data_2 : 1;
+ u32 pspi_data_3 : 1;
+ u32 i2c_scl :1;
+ u32 i2c_sda :1;
+ u32 uart1_rx :1;
+ u32 uart1_tx :1;
+ u32 uart1_rts_i2s_clk :1;
+ u32 uart1_cts_i2s_ws :1;
+ u32 dbg_uart_rx_i2s_din :1;
+ u32 dbg_uart_tx_i2s_dout :1;
+ u32 lp_wakeup_boot_bypass :1;
+ u32 led_0 :1;
+ u32 btcoex_wlan_active_ext_pa_ant_sel_A :1;
+ u32 btcoex_bt_priority_ext_pa_ant_sel_B :1;
+ u32 btcoex_bt_active_ext_pa_on_off :1;
+ u32 rf_reset :1;
+ u32 sleep_ind_from_device :1;
+} __packed;
+
+struct rsi_config_vals {
+ u16 desc_word[8];
+ u8 lp_ps_handshake;
+ u8 ulp_ps_handshake;
+ u8 sleep_config_params; /* 0 for no handshake,
+ * 1 for GPIO based handshake,
+ * 2 packet handshake
+ */
+ u8 unused_ulp_gpio;
+ u32 unused_soc_gpio_bitmap;
+ u8 ext_pa_or_bt_coex_en;
+ u8 opermode;
+ u8 wlan_rf_pwr_mode;
+ u8 bt_rf_pwr_mode;
+ u8 zigbee_rf_pwr_mode;
+ u8 driver_mode;
+ u8 region_code;
+ u8 antenna_sel_val;
+#define EXT_PA 1
+#define EXT_BT_COEX 2
+} __packed;
+
static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
{
return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12;
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index d21d40d..b20b99d 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -42,6 +42,7 @@ struct rsi_91x_usbdev {
struct usb_interface *pfunction;
struct urb *rx_usb_urb[MAX_RX_URBS];
u8 *tx_buffer;
+ u8 *saved_tx_buffer;
__le16 bulkin_size;
u8 bulkin_endpoint_addr;
__le16 bulkout_size[MAX_BULK_EP];
--
2.4.11
^ permalink raw reply related
* [PATCH 1/2] rsi: New firware loading method for RSI 91X devices
From: Prameela Rani Garnepudi @ 2016-10-21 10:09 UTC (permalink / raw)
To: linux-wireless
Cc: kvalo, johannes.berg, hofrat, xypron.glpk, prameela.garnepudi,
Prameela Rani Garnepudi
RSI deprecated the old firmware loading method and introduced
new method using soft boot loader for 9113 chipsets.
Current driver only supports 9113 device model hence firmware
loading method has been changed.
In the new method, complete RAM image and flash image are present
in the flash. Two firmwares present in the device, Boot loader firmware
and functional firmware. Boot loader firmware is fixed but functional
firmware can be changed. Before loading the functional firmware, host
issues commands to check whether existing firmware in the chip and the
firmware file content to load are same or not. If not, host issues
commands to load the RAM image and then boot loaded switches to the
functioanl firmware.
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
---
drivers/net/wireless/rsi/Makefile | 2 +-
drivers/net/wireless/rsi/rsi_91x_hal.c | 1049 +++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 49 ++
drivers/net/wireless/rsi/rsi_91x_pkt.c | 215 ------
drivers/net/wireless/rsi/rsi_91x_sdio.c | 231 +++++-
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 192 +----
drivers/net/wireless/rsi/rsi_91x_usb.c | 176 ++++-
drivers/net/wireless/rsi/rsi_91x_usb_ops.c | 130 +---
drivers/net/wireless/rsi/rsi_common.h | 4 +
drivers/net/wireless/rsi/rsi_hal.h | 150 ++++
drivers/net/wireless/rsi/rsi_main.h | 68 +-
drivers/net/wireless/rsi/rsi_mgmt.h | 2 +
drivers/net/wireless/rsi/rsi_sdio.h | 18 +-
drivers/net/wireless/rsi/rsi_usb.h | 14 +-
14 files changed, 1720 insertions(+), 580 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_hal.c
delete mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c
create mode 100644 drivers/net/wireless/rsi/rsi_hal.h
diff --git a/drivers/net/wireless/rsi/Makefile b/drivers/net/wireless/rsi/Makefile
index 25828b6..a475c81 100644
--- a/drivers/net/wireless/rsi/Makefile
+++ b/drivers/net/wireless/rsi/Makefile
@@ -2,7 +2,7 @@ rsi_91x-y += rsi_91x_main.o
rsi_91x-y += rsi_91x_core.o
rsi_91x-y += rsi_91x_mac80211.o
rsi_91x-y += rsi_91x_mgmt.o
-rsi_91x-y += rsi_91x_pkt.o
+rsi_91x-y += rsi_91x_hal.o
rsi_91x-$(CONFIG_RSI_DEBUGFS) += rsi_91x_debugfs.o
rsi_usb-y += rsi_91x_usb.o rsi_91x_usb_ops.o
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
new file mode 100644
index 0000000..178d411
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -0,0 +1,1049 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Developers
+ * Prameela Rani Garnepudi 2016 <prameela.garnepudi@redpinesignals.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/firmware.h>
+#include <linux/version.h>
+#include <linux/jiffies.h>
+#include "rsi_mgmt.h"
+#include "rsi_hal.h"
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/* FLASH Firmware */
+struct ta_metadata metadata_flash_content[] = {
+ {"flash_content", 0x00010000},
+ {"RS9113_WLAN_QSPI.rps", 0x00010000},
+ {"RS9113_WLAN_BT_DUAL_MODE.rps", 0x00010000},
+ {"RS9113_WLAN_ZIGBEE.rps", 0x00010000},
+ {"RS9113_AP_BT_DUAL_MODE.rps", 0x00010000},
+ {"RS9113_WLAN_QSPI.rps", 0x00010000}
+};
+
+/**
+ * rsi_send_data_pkt() - This function sends the received data packet from
+ * driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *wh = NULL;
+ struct ieee80211_tx_info *info;
+ struct skb_info *tx_params;
+ struct ieee80211_bss_conf *bss = NULL;
+ int status = -EINVAL;
+ u8 ieee80211_hdr_size = MIN_802_11_HDR_LEN;
+ u8 dword_align_bytes = 0;
+ u8 header_size = 0;
+ __le16 *frame_desc;
+ struct xtended_desc *xtend_desc;
+ u16 seq_num = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ bss = &info->control.vif->bss_conf;
+ tx_params = (struct skb_info *)info->driver_data;
+
+ if (!bss->assoc)
+ goto err;
+
+ dword_align_bytes = ((uintptr_t)skb->data & 0x3f);
+ header_size = dword_align_bytes + FRAME_DESC_SZ +
+ sizeof(struct xtended_desc);
+ if (header_size > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
+ status = -ENOSPC;
+ goto err;
+ }
+
+ skb_push(skb, header_size);
+ frame_desc = (__le16 *)&skb->data[0];
+ xtend_desc = (struct xtended_desc *)&skb->data[FRAME_DESC_SZ];
+ memset((u8 *)frame_desc, 0, header_size);
+
+ wh = (struct ieee80211_hdr *)&skb->data[header_size];
+ seq_num = (le16_to_cpu(wh->seq_ctrl) >> 4);
+
+ frame_desc[2] = cpu_to_le16(header_size - FRAME_DESC_SZ);
+ if (ieee80211_is_data_qos(wh->frame_control)) {
+ ieee80211_hdr_size += 2;
+ frame_desc[6] |= cpu_to_le16(BIT(12));
+ }
+
+ if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
+ (common->secinfo.security_enable)) {
+ if (rsi_is_cipher_wep(common))
+ ieee80211_hdr_size += 4;
+ else
+ ieee80211_hdr_size += 8;
+ frame_desc[6] |= cpu_to_le16(BIT(15));
+ }
+
+ frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_DATA_Q << 12));
+ frame_desc[2] |= cpu_to_le16(ieee80211_hdr_size << 8);
+
+ if (common->min_rate != 0xffff) {
+ /* Send fixed rate */
+ frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ frame_desc[4] = cpu_to_le16(common->min_rate);
+
+ if (conf_is_ht40(&common->priv->hw->conf))
+ frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
+
+ if ((common->vif_info[0].sgi) && (common->min_rate & 0x100)) {
+ /* Only MCS rates */
+ frame_desc[4] |= cpu_to_le16(ENABLE_SHORTGI_RATE);
+ }
+ }
+
+ if ((skb->data[header_size + 12] == 0x88) &&
+ (skb->data[header_size + 12] == 0x8e)) {
+ rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n");
+ frame_desc[6] |= cpu_to_le16(BIT(13));
+ frame_desc[1] |= cpu_to_le16(BIT(12));
+#define EAPOL_RETRY_CNT 15
+ xtend_desc->retry_cnt = EAPOL_RETRY_CNT;
+ }
+
+ frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
+ frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
+ (skb->priority & 0xf) |
+ (tx_params->sta_id << 8));
+
+ status = adapter->host_intf_ops->write_pkt(common->priv,
+ skb->data, skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", __func__);
+
+err:
+ ++common->tx_stats.total_tx_pkt_freed[skb->priority];
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
+
+/**
+ * rsi_send_mgmt_pkt() - This functions prepares the descriptor for
+ * the given management packet and send to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_mgmt_pkt(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *wh = NULL;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_bss_conf *bss = NULL;
+ struct ieee80211_hw *hw = adapter->hw;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct skb_info *tx_params;
+ int status = -E2BIG;
+ __le16 *desc = NULL;
+ struct xtended_desc *xtend_desc = NULL;
+ u8 header_size = 0;
+ u8 vap_id = 0;
+ u32 dword_align_req_bytes = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ tx_params = (struct skb_info *)info->driver_data;
+
+ if (tx_params->flags & INTERNAL_MGMT_PKT) {
+ skb->data[1] |= BIT(7); /* Immediate Wakeup bit*/
+ status = adapter->host_intf_ops->write_pkt(common->priv,
+ (u8 *)skb->data,
+ skb->len);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write the packet\n",
+ __func__);
+ }
+ dev_kfree_skb(skb);
+ return status;
+ }
+
+ /* Update header size */
+ header_size = FRAME_DESC_SZ + sizeof(struct xtended_desc) +
+ dword_align_req_bytes;
+ if (header_size > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to add extended descriptor\n",
+ __func__);
+ goto err;
+ }
+ skb_push(skb, header_size);
+ memset(&skb->data[0], 0, header_size);
+
+ bss = &info->control.vif->bss_conf;
+ wh = (struct ieee80211_hdr *)&skb->data[header_size];
+
+ desc = (__le16 *)skb->data;
+ xtend_desc = (struct xtended_desc *)&skb->data[FRAME_DESC_SZ];
+
+ if (skb->len > MAX_MGMT_PKT_SIZE) {
+ rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
+ goto err;
+ }
+
+ desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ desc[1] = cpu_to_le16(TX_DOT11_MGMT);
+ desc[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
+ desc[2] |= cpu_to_le16(header_size - FRAME_DESC_SZ);
+ desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ if (wh->addr1[0] & BIT(0))
+ desc[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
+ desc[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
+
+ if (common->band == NL80211_BAND_2GHZ)
+ desc[4] = cpu_to_le16(RSI_11B_MODE);
+ else
+ desc[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
+
+ if (conf_is_ht40(conf)) {
+ desc[4] |= cpu_to_le16(0xB | RSI_11G_MODE);
+ desc[5] = cpu_to_le16(0x6);
+ }
+
+ /* Indicate to firmware to give cfm */
+ if (ieee80211_is_probe_req(wh->frame_control) && (!bss->assoc)) {
+ rsi_dbg(INFO_ZONE, "%s: blocking mgmt queue\n", __func__);
+ desc[1] |= cpu_to_le16(RSI_DESC_REQUIRE_CFM_TO_HOST);
+ xtend_desc->confirm_frame_type = PROBEREQ_CONFIRM;
+ common->mgmt_q_block = true;
+ }
+
+ desc[7] |= cpu_to_le16(vap_id << 8); /* Station ID */
+ desc[4] |= cpu_to_le16(vap_id << 14);
+
+ status = adapter->host_intf_ops->write_pkt(common->priv,
+ (u8 *)desc,
+ skb->len);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write the packet\n",
+ __func__);
+ }
+
+err:
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
+
+/**
+ * bl_cmd_timeout() - This function is called when BL command timed out
+ * @priv: Pointer to the hardware structure.
+ *
+ * Return: NONE.
+ */
+static void bl_cmd_timeout(unsigned long priv)
+{
+ struct rsi_hw *adapter = (struct rsi_hw *)priv;
+
+ adapter->blcmd_timer_expired = 1;
+ del_timer(&adapter->bl_cmd_timer);
+}
+
+/**
+ * bl_start_cmd_timer() - This function starts the BL command timer
+ * @adapter: Pointer to the hardware structure.
+ * @timeout: Timeout of the command in milliseconds
+ *
+ * Return: 0 on success.
+ */
+static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
+{
+ init_timer(&adapter->bl_cmd_timer);
+ adapter->bl_cmd_timer.data = (unsigned long)adapter;
+ adapter->bl_cmd_timer.function = (void *)&bl_cmd_timeout;
+ adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
+
+ adapter->blcmd_timer_expired = 0;
+ add_timer(&adapter->bl_cmd_timer);
+
+ return 0;
+}
+
+/**
+ * bl_stop_cmd_timer() - This function stops the BL command timer
+ * @adapter: Pointer to the hardware structure.
+ *
+ * Return: 0 on success.
+ */
+static int bl_stop_cmd_timer(struct rsi_hw *adapter)
+{
+ adapter->blcmd_timer_expired = 0;
+ if (timer_pending(&adapter->bl_cmd_timer))
+ del_timer(&adapter->bl_cmd_timer);
+
+ return 0;
+}
+
+/**
+ * bl_write_cmd() - This function writes the BL command to device
+ * @adapter: Pointer to the hardware structure.
+ * @cmd: Command to write
+ * @exp_resp: Expected Response
+ * @cmd_resp: Received Response
+ *
+ * Return: 0 on success.
+ */
+int bl_write_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, u16 *cmd_resp)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+ u32 regin_val = 0, regout_val = 0;
+ u8 output = 0;
+ u32 regin_input = 0;
+
+ regin_input = (REGIN_INPUT | adapter->priv->coex_mode);
+
+ while (!adapter->blcmd_timer_expired) {
+ regin_val = 0;
+ if (hif_ops->master_reg_read(adapter,
+ SWBL_REGIN,
+ ®in_val,
+ 2) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %0x REGIN reading failed..\n",
+ __func__, cmd);
+ goto fail;
+ }
+ mdelay(1);
+ if ((regin_val >> 12) != REGIN_VALID)
+ break;
+ }
+ if (adapter->blcmd_timer_expired) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %0x REGIN reading timed out..\n",
+ __func__, cmd);
+ goto fail;
+ }
+
+ rsi_dbg(INFO_ZONE,
+ "Issuing write to Regin regin_val:%0x sending cmd:%0x\n",
+ regin_val, (cmd | regin_input << 8));
+ if ((hif_ops->master_reg_write(adapter,
+ SWBL_REGIN,
+ (cmd | regin_input << 8),
+ 2)) < 0) {
+ goto fail;
+ }
+ mdelay(1);
+
+ if (cmd == LOAD_HOSTED_FW || cmd == JUMP_TO_ZERO_PC) {
+ /* JUMP_TO_ZERO_PC doesn't expect
+ * any response. So return from here
+ */
+ return 0;
+ }
+
+ while (!adapter->blcmd_timer_expired) {
+ regout_val = 0;
+ if (hif_ops->master_reg_read(adapter,
+ SWBL_REGOUT,
+ ®out_val,
+ 2) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %0x REGOUT reading failed..\n",
+ __func__, cmd);
+ goto fail;
+ }
+ mdelay(1);
+ if ((regout_val >> 8) == REGOUT_VALID)
+ break;
+ }
+ if (adapter->blcmd_timer_expired) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %0x REGOUT reading timed out..\n",
+ __func__, cmd);
+ goto fail;
+ }
+
+ *cmd_resp = ((u16 *)®out_val)[0] & 0xffff;
+
+ output = ((u8 *)®out_val)[0] & 0xff;
+
+ rsi_dbg(INFO_ZONE, "Invalidating regout\n");
+ if ((hif_ops->master_reg_write(adapter,
+ SWBL_REGOUT,
+ (cmd | REGOUT_INVALID << 8),
+ 2)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %0x REGOUT writing failed..\n",
+ __func__, cmd);
+ goto fail;
+ }
+ mdelay(1);
+
+ if (output == exp_resp) {
+ rsi_dbg(INFO_ZONE,
+ "%s: Recvd Expected resp %x for cmd %0x\n",
+ __func__, output, cmd);
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Recvd resp %x for cmd %0x\n",
+ __func__, output, cmd);
+ goto fail;
+ }
+ return 0;
+
+fail:
+ return -1;
+}
+
+/**
+ * bl_cmd() - This function initiates the BL command
+ * @adapter: Pointer to the hardware structure.
+ * @cmd: Command to write
+ * @exp_resp: Expected Response
+ * @str: Command string
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
+{
+ u16 regout_val = 0;
+ u32 timeout = 0;
+
+ rsi_dbg(INFO_ZONE, "Issuing cmd: \"%s\"\n", str);
+
+ if ((cmd == EOF_REACHED) || (cmd == PING_VALID) || (cmd == PONG_VALID))
+ timeout = BL_BURN_TIMEOUT;
+ else
+ timeout = BL_CMD_TIMEOUT;
+
+ bl_start_cmd_timer(adapter, timeout);
+ if (bl_write_cmd(adapter, cmd, exp_resp, ®out_val) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Command %s (%0x) writing failed..\n",
+ __func__, str, cmd);
+ goto fail;
+ }
+ bl_stop_cmd_timer(adapter);
+ return 0;
+
+fail:
+ return -1;
+}
+
+/**
+ * bl_write_header() - This function writes the BL header
+ * @adapter: Pointer to the hardware structure.
+ * @flash_content: Flash content
+ * @content_size: Flash content size
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int bl_write_header(struct rsi_hw *adapter,
+ u8 *flash_content, u32 content_size)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+ struct bl_header bl_hdr;
+ u32 write_addr, write_len;
+
+#define CHECK_SUM_OFFSET 20
+#define LEN_OFFSET 8
+#define ADDR_OFFSET 16
+
+ bl_hdr.flags = 0;
+ bl_hdr.image_no = cpu_to_le32(adapter->priv->coex_mode);
+ bl_hdr.check_sum = cpu_to_le32(
+ *(u32 *)&flash_content[CHECK_SUM_OFFSET]);
+ bl_hdr.flash_start_address = cpu_to_le32(
+ *(u32 *)&flash_content[ADDR_OFFSET]);
+ bl_hdr.flash_len = cpu_to_le32(*(u32 *)&flash_content[LEN_OFFSET]);
+ write_len = sizeof(struct bl_header);
+
+ if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) {
+ write_addr = PING_BUFFER_ADDRESS;
+ if ((hif_ops->write_reg_multiple(adapter,
+ write_addr,
+ (u8 *)&bl_hdr,
+ write_len)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to load Version/CRC structure\n",
+ __func__);
+ goto fail;
+ }
+ } else {
+ write_addr = PING_BUFFER_ADDRESS >> 16;
+ if ((hif_ops->master_access_msword(adapter, write_addr)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ goto fail;
+ }
+ write_addr = RSI_SD_REQUEST_MASTER |
+ (PING_BUFFER_ADDRESS & 0xFFFF);
+ if ((hif_ops->write_reg_multiple(adapter,
+ write_addr,
+ (u8 *)&bl_hdr,
+ write_len)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to load Version/CRC structure\n",
+ __func__);
+ goto fail;
+ }
+ }
+ return 0;
+
+fail:
+ return -1;
+}
+
+/**
+ * read_flash_capacity() - This function reads the flash size from device
+ * @adapter: Pointer to the hardware structure.
+ *
+ * Return: flash capacity on success, 0 on failure.
+ */
+static u32 read_flash_capacity(struct rsi_hw *adapter)
+{
+ u32 flash_sz = 0;
+
+ if ((adapter->host_intf_ops->master_reg_read(adapter,
+ FLASH_SIZE_ADDR,
+ &flash_sz, 2)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Flash size reading failed..\n",
+ __func__);
+ return 0;
+ }
+ rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz);
+
+ return (flash_sz * 1024); /* Return size in kbytes */
+}
+
+/**
+ * ping_pong_write() - This function writes the flash contents throgh ping
+ * pong buffers
+ * @adapter: Pointer to the hardware structure.
+ * @cmd: command ping/pong write
+ * @addr: address to write
+ * @size: size
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+ u32 block_size = 0;
+ u32 cmd_addr;
+ u16 cmd_resp = 0, cmd_req = 0;
+ u8 *str;
+
+ if (adapter->rsi_host_intf == RSI_HOST_INTF_SDIO)
+ block_size = 256;
+ else
+ block_size = 252;
+
+ if (cmd == PING_WRITE) {
+ cmd_addr = PING_BUFFER_ADDRESS;
+ cmd_resp = PONG_AVAIL;
+ cmd_req = PING_VALID;
+ str = "PING_VALID";
+ } else {
+ cmd_addr = PONG_BUFFER_ADDRESS;
+ cmd_resp = PING_AVAIL;
+ cmd_req = PONG_VALID;
+ str = "PONG_VALID";
+ }
+
+ if (hif_ops->load_data_master_write(adapter,
+ cmd_addr,
+ size,
+ block_size,
+ addr)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to write blk at addr %0x\n",
+ __func__, *addr);
+ goto fail;
+ }
+ if (bl_cmd(adapter, cmd_req, cmd_resp, str) < 0) {
+ bl_stop_cmd_timer(adapter);
+ goto fail;
+ }
+ return 0;
+
+fail:
+ return -1;
+}
+
+/**
+ * auto_fw_upgrade() - This function loads the firmware to device
+ * @adapter: Pointer to the hardware structure.
+ * @flash_content: Firmware to load
+ * @content_size: Size of the firmware
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int auto_fw_upgrade(struct rsi_hw *adapter,
+ u8 *flash_content,
+ u32 content_size)
+{
+ u8 cmd;
+ u8 *temp_flash_content;
+ u32 temp_content_size;
+ u32 num_flash;
+ u32 index;
+ u32 flash_start_address;
+
+ temp_flash_content = flash_content;
+
+ if (content_size > MAX_FLASH_FILE_SIZE) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Flash Content size is more than 400K %u\n",
+ __func__, MAX_FLASH_FILE_SIZE);
+ goto fail;
+ }
+
+ flash_start_address = cpu_to_le32(
+ *(u32 *)&flash_content[FLASHING_START_ADDRESS]);
+ rsi_dbg(INFO_ZONE, "flash start address: %08x\n", flash_start_address);
+
+ if (flash_start_address < FW_IMAGE_MIN_ADDRESS) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Fw image Flash Start Address is less than 68K\n",
+ __func__);
+ goto fail;
+ }
+
+ if (flash_start_address % FLASH_SECTOR_SIZE) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Flash Start Address is not multiple of 4K\n",
+ __func__);
+ goto fail;
+ }
+
+ if ((flash_start_address + content_size) > adapter->flash_capacity) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Flash Content will cross max flash size\n",
+ __func__);
+ goto fail;
+ }
+
+ temp_content_size = content_size;
+ num_flash = content_size / FLASH_WRITE_CHUNK_SIZE;
+
+ rsi_dbg(INFO_ZONE, "content_size: %d\n", content_size);
+ rsi_dbg(INFO_ZONE, "num_flash: %d\n", num_flash);
+
+ for (index = 0; index <= num_flash; index++) {
+ rsi_dbg(INFO_ZONE, "flash index: %d\n", index);
+ if (index != num_flash) {
+ content_size = FLASH_WRITE_CHUNK_SIZE;
+ rsi_dbg(INFO_ZONE,
+ "QSPI content_size:%d\n",
+ content_size);
+ } else {
+ content_size =
+ temp_content_size % FLASH_WRITE_CHUNK_SIZE;
+ rsi_dbg(INFO_ZONE,
+ "Writing last sector content_size:%d\n",
+ content_size);
+ if (!content_size) {
+ rsi_dbg(INFO_ZONE, "INSTRUCTION SIZE ZERO\n");
+ break;
+ }
+ }
+
+ if (index % 2)
+ cmd = PING_WRITE;
+ else
+ cmd = PONG_WRITE;
+
+ if (ping_pong_write(adapter,
+ cmd,
+ flash_content,
+ content_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %d block\n",
+ __func__, index);
+ goto fail;
+ }
+
+ rsi_dbg(INFO_ZONE,
+ "%s: Successfully loaded %d instructions\n",
+ __func__, index);
+ flash_content += content_size;
+ }
+
+ if (bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
+ "EOF_REACHED") < 0) {
+ bl_stop_cmd_timer(adapter);
+ goto fail;
+ }
+ rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
+ return 0;
+
+fail:
+ return -1;
+}
+
+/**
+ * read_flash_content() - This function reads the flash content
+ * from device
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int read_flash_content(struct rsi_hw *adapter,
+ u8 *temp_buf,
+ u32 address,
+ u32 len)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+
+ if (adapter->rsi_host_intf == RSI_HOST_INTF_SDIO) {
+ if (hif_ops->master_access_msword(adapter,
+ address >> 16) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return -1;
+ }
+ address &= 0xFFFF;
+ return hif_ops->read_reg_multiple(adapter,
+ address | RSI_SD_REQUEST_MASTER,
+ temp_buf, len);
+ } else {
+ return hif_ops->read_reg_multiple(adapter, address,
+ temp_buf, len);
+ }
+
+ return 0;
+}
+
+/**
+ * verify_flash_content() - This function verifies the loaded flash content
+ * from device
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int verify_flash_content(struct rsi_hw *adapter,
+ u8 *flash_content,
+ u32 instructions_sz,
+ u32 eeprom_offset,
+ u8 read_mode)
+{
+ u32 status = 0;
+ u32 num_loops = 0, idx;
+ u32 chunk_size = 0;
+ u8 *dest_addr = NULL;
+ u32 addr = 0;
+ u32 flash_chunk_size;
+
+ if (adapter->rsi_host_intf == RSI_HOST_INTF_USB)
+ flash_chunk_size = USB_FLASH_READ_CHUNK_SIZE;
+ else
+ flash_chunk_size = SDIO_FLASH_READ_CHUNK_SIZE;
+
+ num_loops = instructions_sz / flash_chunk_size;
+
+ if (instructions_sz % flash_chunk_size)
+ num_loops++;
+
+ if (read_mode == EEPROM_READ_MODE) {
+ dest_addr = adapter->priv->rx_data_pkt;
+ } else {
+ dest_addr = kzalloc(instructions_sz, GFP_KERNEL);
+ if (!dest_addr) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Memory allocation for dest_addr failed\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ rsi_dbg(INFO_ZONE, "Number of loops required: %d\n", num_loops);
+ for (idx = 0; idx < num_loops; idx++) {
+ if (instructions_sz < flash_chunk_size)
+ chunk_size = instructions_sz;
+ else
+ chunk_size = flash_chunk_size;
+ rsi_dbg(INFO_ZONE, "idx is %d and chunk size is %d\n",
+ idx, chunk_size);
+ if (read_mode == EEPROM_READ_MODE) {
+ adapter->eeprom.offset = eeprom_offset;
+ rsi_dbg(INFO_ZONE,
+ "eeprom offset is %x\n", eeprom_offset);
+ adapter->eeprom.length = chunk_size;
+ status = rsi_flash_read(adapter);
+ if (status == 0) {
+ rsi_dbg(INFO_ZONE,
+ "%s: BLOCK/SECTOR READING SUCCESSFUL\n",
+ __func__);
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: READING FROM FLASH FAILED\n",
+ __func__);
+ return -1;
+ }
+ } else {
+ memset(dest_addr, 0, chunk_size);
+ addr = SOC_FLASH_ADDR + eeprom_offset;
+ rsi_dbg(INFO_ZONE,
+ "Reading flash addr 0x%0x\n", addr);
+ if (read_flash_content(adapter, dest_addr, addr,
+ flash_chunk_size) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s:Failed to read calib data\n",
+ __func__);
+ kfree(dest_addr);
+ return -1;
+ }
+ }
+ if (memcmp(&flash_content[idx * flash_chunk_size],
+ dest_addr,
+ chunk_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: VERIFICATION OF FLASH CHUNK FAILED\n",
+ __func__);
+ return -1;
+ }
+ eeprom_offset += chunk_size;
+ instructions_sz -= chunk_size;
+ }
+ return 0;
+}
+
+/**
+ * rsi_load_9113_firmware () - This function loads the TA firmware for 9113
+ * device.
+ * @adapter: Pointer to the rsi hw.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_load_9113_firmware(struct rsi_hw *adapter)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+ const struct firmware *fw_entry = NULL;
+ u32 regout_val = 0;
+ u16 tmp_regout_val = 0;
+ u8 *flash_content = NULL;
+ u32 content_size = 0;
+ struct ta_metadata *metadata_p;
+
+ bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
+ while (!adapter->blcmd_timer_expired) {
+ if ((hif_ops->master_reg_read(adapter,
+ SWBL_REGOUT,
+ ®out_val,
+ 2)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: REGOUT read failed\n", __func__);
+ goto fail;
+ }
+ mdelay(1);
+ if ((regout_val >> 8) == REGOUT_VALID)
+ break;
+ }
+ if (adapter->blcmd_timer_expired) {
+ rsi_dbg(ERR_ZONE, "%s: REGOUT read timedout\n", __func__);
+ rsi_dbg(ERR_ZONE,
+ "%s: Soft boot loader not present\n", __func__);
+ goto fail;
+ }
+ bl_stop_cmd_timer(adapter);
+
+ rsi_dbg(INFO_ZONE, "Received Board Version Number: %x\n",
+ (regout_val & 0xff));
+
+ if ((hif_ops->master_reg_write(adapter,
+ SWBL_REGOUT,
+ (REGOUT_INVALID | REGOUT_INVALID << 8),
+ 2)) < 0) {
+ rsi_dbg(ERR_ZONE, "%s: REGOUT writing failed..\n", __func__);
+ goto fail;
+ }
+ mdelay(1);
+
+ if ((bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
+ "AUTO_READ_CMD")) < 0)
+ goto fail;
+
+ adapter->flash_capacity = read_flash_capacity(adapter);
+ if (adapter->flash_capacity <= 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to read flash size from EEPROM\n",
+ __func__);
+ goto fail;
+ }
+
+ metadata_p = &metadata_flash_content[adapter->priv->coex_mode];
+
+ rsi_dbg(INIT_ZONE, "%s: loading file %s\n", __func__, metadata_p->name);
+
+ if ((request_firmware(&fw_entry, metadata_p->name,
+ adapter->device)) < 0) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n",
+ __func__, metadata_p->name);
+ goto fail;
+ }
+ flash_content = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+ if (!flash_content) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to copy firmware\n", __func__);
+ goto fail;
+ }
+ content_size = fw_entry->size;
+
+ if (bl_write_header(adapter, flash_content, content_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: RPS Image header loading failed\n",
+ __func__);
+ goto fail;
+ }
+
+ bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
+ if (bl_write_cmd(adapter, CHECK_CRC, CMD_PASS, &tmp_regout_val) < 0) {
+ bl_stop_cmd_timer(adapter);
+ rsi_dbg(ERR_ZONE,
+ "%s: CHECK_CRC Command writing failed..\n",
+ __func__);
+ if ((tmp_regout_val & 0xff) == CMD_FAIL) {
+ rsi_dbg(ERR_ZONE,
+ "CRC Fail.. Proceeding to Upgrade mode\n");
+ goto fw_upgrade;
+ }
+ }
+ bl_stop_cmd_timer(adapter);
+
+ if (bl_cmd(adapter, POLLING_MODE, CMD_PASS, "POLLING_MODE") < 0)
+ goto fail;
+
+load_image_cmd:
+ if ((bl_cmd(adapter,
+ LOAD_HOSTED_FW,
+ LOADING_INITIATED,
+ "LOAD_HOSTED_FW")) < 0)
+ goto fail;
+ rsi_dbg(INFO_ZONE, "Load Image command passed..\n");
+ goto success;
+
+fw_upgrade:
+ /* After burning the RPS header, firmware has to be
+ * burned using the below steps
+ */
+ if (bl_cmd(adapter, BURN_HOSTED_FW, SEND_RPS_FILE, "FW_UPGRADE") < 0)
+ goto fail;
+
+ rsi_dbg(INFO_ZONE, "Burn Command Pass.. Upgrading the firmware\n");
+
+ if (auto_fw_upgrade(adapter, flash_content, content_size) == 0) {
+ rsi_dbg(ERR_ZONE, "Auto firmware successful\n");
+ goto load_image_cmd;
+ }
+
+ if (bl_cmd(adapter, CONFIG_AUTO_READ_MODE,
+ CMD_PASS, "AUTO_READ_MODE") < 0)
+ goto fail;
+
+ rsi_dbg(INFO_ZONE, "Starting Flash Verification Process\n");
+
+ if ((verify_flash_content(adapter,
+ adapter->calib_data,
+ EEPROM_DATA_SIZE,
+ 0,
+ MASTER_READ_MODE)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: FLASHING SBL failed in Calib VERIFICATION phase\n",
+ __func__);
+ goto fail;
+ }
+ if ((verify_flash_content(adapter,
+ flash_content + BL_HEADER,
+ (content_size - BL_HEADER),
+ EEPROM_DATA_SIZE,
+ MASTER_READ_MODE)) < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s:FLASHING SBL failed in SBL VERIFICATION phase\n",
+ __func__);
+ goto fail;
+ }
+ rsi_dbg(INFO_ZONE,
+ "Flash Verification Process Completed Successfully\n");
+ rsi_dbg(INFO_ZONE, "SWBL FLASHING THROUGH SWBL PASSED...\n");
+
+success:
+ kfree(flash_content);
+ release_firmware(fw_entry);
+ return 0;
+
+fail:
+ kfree(flash_content);
+ release_firmware(fw_entry);
+ return -1;
+}
+
+/**
+ * rsi_hal_device_init() - This function initializes the Device
+ * @adapter: Pointer to the hardware structure
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_hal_device_init(struct rsi_hw *adapter)
+{
+ struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
+
+#ifdef CONFIG_RSI_COEX
+ adapter->priv->coex_mode = 4;
+#else
+ adapter->priv->coex_mode = 1;
+#endif
+ adapter->device_model = RSI_DEV_9113; /* TODO: Get from module param */
+ switch (adapter->device_model) {
+ case RSI_DEV_9110:
+ /* TODO: Add code for 9110 */
+ break;
+ case RSI_DEV_9113:
+ if (rsi_load_9113_firmware(adapter)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to load TA instructions\n",
+ __func__);
+ return -1;
+ }
+ break;
+ case RSI_DEV_9116:
+ /* TODO: Add code for 9116 */
+ break;
+ default:
+ return -1;
+ }
+ if (adapter->rsi_host_intf == RSI_HOST_INTF_SDIO) {
+ if (hif_ops->master_access_msword(adapter,
+ MISC_CFG_BASE_ADDR)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word reg\n",
+ __func__);
+ return -1;
+ }
+ rsi_dbg(INIT_ZONE,
+ "%s: Setting ms word to 0x41050000\n",
+ __func__);
+ }
+ adapter->common_hal_fsm = COMMAN_HAL_WAIT_FOR_CARD_READY;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rsi_hal_device_init);
+
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index 35c14cc..7aec45a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -1240,6 +1240,55 @@ int rsi_send_block_unblock_frame(struct rsi_common *common, bool block_event)
}
+/**
+ * rsi_flash_read() - This function sends the frash read frame to device
+ * @adapter: Pointer to the hardware structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_flash_read(struct rsi_hw *adapter)
+{
+ struct rsi_common *common = adapter->priv;
+ struct rsi_mac_frame *cmd_frame = NULL;
+ struct sk_buff *skb;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending flash read frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb)
+ return -ENOMEM;
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ cmd_frame = (struct rsi_mac_frame *)skb->data;
+
+ /* FrameType */
+ cmd_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+
+ /* Format of length and offset differs for
+ * autoflashing and swbl flashing
+ */
+ cmd_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+
+ /* Number of bytes to read */
+ rsi_dbg(INFO_ZONE, " eeprom length 0x%x, %d\n",
+ adapter->eeprom.length, adapter->eeprom.length);
+ cmd_frame->desc_word[3] = cpu_to_le16(adapter->eeprom.length << 4);
+
+ cmd_frame->desc_word[2] |= cpu_to_le16(3 << 8);
+ if (adapter->eeprom_init) {
+ rsi_dbg(INFO_ZONE, "spi init sent");
+ cmd_frame->desc_word[2] |= cpu_to_le16(BIT(13));
+ }
+
+ /* Address to read */
+ cmd_frame->desc_word[4] = cpu_to_le16(adapter->eeprom.offset);
+ cmd_frame->desc_word[5] = cpu_to_le16(adapter->eeprom.offset >> 16);
+ cmd_frame->desc_word[6] = cpu_to_le16(0); //delay = 0
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
/**
* rsi_handle_ta_confirm_type() - This function handles the confirm frames.
diff --git a/drivers/net/wireless/rsi/rsi_91x_pkt.c b/drivers/net/wireless/rsi/rsi_91x_pkt.c
deleted file mode 100644
index 02920c9..0000000
--- a/drivers/net/wireless/rsi/rsi_91x_pkt.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/**
- * Copyright (c) 2014 Redpine Signals Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "rsi_mgmt.h"
-
-/**
- * rsi_send_data_pkt() - This function sends the recieved data packet from
- * driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *tmp_hdr;
- struct ieee80211_tx_info *info;
- struct skb_info *tx_params;
- struct ieee80211_bss_conf *bss;
- int status;
- u8 ieee80211_size = MIN_802_11_HDR_LEN;
- u8 extnd_size;
- __le16 *frame_desc;
- u16 seq_num;
-
- info = IEEE80211_SKB_CB(skb);
- bss = &info->control.vif->bss_conf;
- tx_params = (struct skb_info *)info->driver_data;
-
- if (!bss->assoc) {
- status = -EINVAL;
- goto err;
- }
-
- tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
- seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
-
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- status = -ENOSPC;
- goto err;
- }
-
- skb_push(skb, (FRAME_DESC_SZ + extnd_size));
- frame_desc = (__le16 *)&skb->data[0];
- memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
-
- if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
- ieee80211_size += 2;
- frame_desc[6] |= cpu_to_le16(BIT(12));
- }
-
- if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
- (common->secinfo.security_enable)) {
- if (rsi_is_cipher_wep(common))
- ieee80211_size += 4;
- else
- ieee80211_size += 8;
- frame_desc[6] |= cpu_to_le16(BIT(15));
- }
-
- frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_DATA_Q << 12));
- frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
-
- if (common->min_rate != 0xffff) {
- /* Send fixed rate */
- frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
- frame_desc[4] = cpu_to_le16(common->min_rate);
-
- if (conf_is_ht40(&common->priv->hw->conf))
- frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
-
- if (common->vif_info[0].sgi) {
- if (common->min_rate & 0x100) /* Only MCS rates */
- frame_desc[4] |=
- cpu_to_le16(ENABLE_SHORTGI_RATE);
- }
-
- }
-
- frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
- frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
- (skb->priority & 0xf) |
- (tx_params->sta_id << 8));
-
- status = adapter->host_intf_write_pkt(common->priv,
- skb->data,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
- __func__);
-
-err:
- ++common->tx_stats.total_tx_pkt_freed[skb->priority];
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
-
-/**
- * rsi_send_mgmt_pkt() - This functions sends the received management packet
- * from driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_mgmt_pkt(struct rsi_common *common,
- struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *wh;
- struct ieee80211_tx_info *info;
- struct ieee80211_bss_conf *bss;
- struct ieee80211_hw *hw = adapter->hw;
- struct ieee80211_conf *conf = &hw->conf;
- struct skb_info *tx_params;
- int status = -E2BIG;
- __le16 *msg;
- u8 extnd_size;
- u8 vap_id = 0;
-
- info = IEEE80211_SKB_CB(skb);
- tx_params = (struct skb_info *)info->driver_data;
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if (tx_params->flags & INTERNAL_MGMT_PKT) {
- if ((extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- dev_kfree_skb(skb);
- return -ENOSPC;
- }
- skb_push(skb, extnd_size);
- skb->data[extnd_size + 4] = extnd_size;
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)skb->data,
- skb->len);
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to write the packet\n", __func__);
- }
- dev_kfree_skb(skb);
- return status;
- }
-
- bss = &info->control.vif->bss_conf;
- wh = (struct ieee80211_hdr *)&skb->data[0];
-
- if (FRAME_DESC_SZ > skb_headroom(skb))
- goto err;
-
- skb_push(skb, FRAME_DESC_SZ);
- memset(skb->data, 0, FRAME_DESC_SZ);
- msg = (__le16 *)skb->data;
-
- if (skb->len > MAX_MGMT_PKT_SIZE) {
- rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
- goto err;
- }
-
- msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_MGMT_Q << 12));
- msg[1] = cpu_to_le16(TX_DOT11_MGMT);
- msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
- msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
- msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
-
- if (wh->addr1[0] & BIT(0))
- msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
-
- if (common->band == NL80211_BAND_2GHZ)
- msg[4] = cpu_to_le16(RSI_11B_MODE);
- else
- msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
-
- if (conf_is_ht40(conf)) {
- msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
- msg[5] = cpu_to_le16(0x6);
- }
-
- /* Indicate to firmware to give cfm */
- if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
- msg[1] |= cpu_to_le16(BIT(10));
- msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
- common->mgmt_q_block = true;
- }
-
- msg[7] |= cpu_to_le16(vap_id << 8);
-
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)msg,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
-
-err:
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 8428858..6f02600 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -1,6 +1,8 @@
/**
* Copyright (c) 2014 Redpine Signals Inc.
*
+ * Developers:
+ * Fariya Fathima 2014 <fariya.f@redpinesignals.com>
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
@@ -18,6 +20,7 @@
#include <linux/module.h>
#include "rsi_sdio.h"
#include "rsi_common.h"
+#include "rsi_hal.h"
/**
* rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
@@ -386,6 +389,7 @@ static int rsi_setupcard(struct rsi_hw *adapter)
rsi_setclock(adapter, 50000);
dev->tx_blk_size = 256;
+ adapter->tx_blk_size = dev->tx_blk_size;
status = rsi_setblocklength(adapter, dev->tx_blk_size);
if (status)
rsi_dbg(ERR_ZONE,
@@ -473,8 +477,6 @@ void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit)
rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__);
}
-
-
/**
* rsi_sdio_read_register_multiple() - This function read multiple bytes of
* information from the SD card.
@@ -485,10 +487,10 @@ void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit)
*
* Return: 0 on success, -1 on failure.
*/
-static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
- u32 addr,
- u32 count,
- u8 *data)
+int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
+ u32 addr,
+ u8 *data,
+ u16 count)
{
struct rsi_91x_sdiodev *dev =
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
@@ -518,7 +520,7 @@ static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
u32 addr,
u8 *data,
- u32 count)
+ u16 count)
{
struct rsi_91x_sdiodev *dev =
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
@@ -552,6 +554,178 @@ int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
return status;
}
+int rsi_sdio_load_data_master_write(struct rsi_hw *adapter,
+ u32 base_address,
+ u32 instructions_sz,
+ u16 block_size,
+ u8 *ta_firmware)
+{
+ u32 num_blocks;
+ u16 msb_address;
+ u32 offset, ii;
+ u8 temp_buf[256];
+ u16 lsb_address;
+
+ num_blocks = instructions_sz / block_size;
+ msb_address = base_address >> 16;
+
+ rsi_dbg(INFO_ZONE, "num_blocks: %d\n", num_blocks);
+
+ /* Loading DM ms word in the sdio slave */
+ if (rsi_sdio_master_access_msword(adapter, msb_address)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", __func__);
+ return -1;
+ }
+
+ for (offset = 0, ii = 0; ii < num_blocks; ii++, offset += block_size) {
+ memset(temp_buf, 0, block_size);
+ memcpy(temp_buf, ta_firmware + offset, block_size);
+ lsb_address = (u16)base_address;
+ if (rsi_sdio_write_register_multiple(adapter,
+ lsb_address | RSI_SD_REQUEST_MASTER,
+ (u8 *)temp_buf, block_size)) {
+ rsi_dbg(ERR_ZONE, "%s: failed to write\n", __func__);
+ return -1;
+ }
+ rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, ii);
+ base_address += block_size;
+ base_address += block_size;
+
+ if ((base_address >> 16) != msb_address) {
+ msb_address += 1;
+
+ /* Loading DM ms word in the sdio slave */
+ if (rsi_sdio_master_access_msword(adapter,
+ msb_address)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word reg\n",
+ __func__);
+ return -1;
+ }
+ }
+ }
+
+ if (instructions_sz % block_size) {
+ memset(temp_buf, 0, block_size);
+ memcpy(temp_buf,
+ ta_firmware + offset,
+ instructions_sz % block_size);
+ lsb_address = (u16)base_address;
+ if (rsi_sdio_write_register_multiple(adapter,
+ lsb_address | RSI_SD_REQUEST_MASTER,
+ (u8 *)(temp_buf),
+ instructions_sz % block_size)) {
+ return -1;
+ }
+ rsi_dbg(INFO_ZONE,
+ "Written Last Block in Address 0x%x Successfully\n",
+ offset | RSI_SD_REQUEST_MASTER);
+ }
+ return 0;
+}
+
+#define align_address(a) ((unsigned long)(a) & ~0x7)
+
+int rsi_sdio_master_reg_read(struct rsi_hw *adapter, u32 addr,
+ u32 *read_buf, u16 size)
+{
+ u32 *data = NULL;
+ u16 ms_addr = 0;
+ u32 align[2] = {};
+ u32 addr_on_bus;
+
+ data = (u32 *)align_address(&align[1]);
+
+ ms_addr = (addr >> 16);
+ if (rsi_sdio_master_access_msword(adapter, ms_addr)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return -1;
+ }
+ addr = addr & 0xFFFF;
+
+ addr_on_bus = (addr & 0xFF000000);
+ if ((addr_on_bus == (FLASH_SIZE_ADDR & 0xFF000000)) ||
+ (addr_on_bus == 0x0)) {
+ addr_on_bus = (addr & ~(0x3));
+ } else
+ addr_on_bus = addr;
+
+ /* Bringing TA out of reset */
+ if (rsi_sdio_read_register_multiple(adapter,
+ (addr_on_bus | RSI_SD_REQUEST_MASTER),
+ (u8 *)data, 4)) {
+ rsi_dbg(ERR_ZONE, "%s: AHB register read failed\n", __func__);
+ return -1;
+ }
+ if (size == 2) {
+ if ((addr & 0x3) == 0)
+ *read_buf = *data;
+ else
+ *read_buf = ((*data >> 16));
+ *read_buf = (*read_buf & 0xFFFF);
+ } else if (size == 1) {
+ if ((addr & 0x3) == 0)
+ *read_buf = *data;
+ else if ((addr & 0x3) == 1)
+ *read_buf = (*data >> 8);
+ else if ((addr & 0x3) == 2)
+ *read_buf = (*data >> 16);
+ else
+ *read_buf = (*data >> 24);
+ *read_buf = (*read_buf & 0xFF);
+ } else { /*size is 4 */
+ *read_buf = *data;
+ }
+
+ return 0;
+}
+
+int rsi_sdio_master_reg_write(struct rsi_hw *adapter,
+ unsigned long addr,
+ unsigned long data,
+ u16 size)
+{
+ unsigned long data1[2];
+ unsigned long *data_alligned;
+
+ data_alligned = (unsigned long *)align_address(&data1[1]);
+
+ if (size == 2) {
+ *data_alligned = ((data << 16) | (data & 0xFFFF));
+ } else if (size == 1) {
+ u32 temp_data;
+
+ temp_data = (data & 0xFF);
+ *data_alligned = ((temp_data << 24) |
+ (temp_data << 16) |
+ (temp_data << 8) |
+ (temp_data));
+ } else {
+ *data_alligned = data;
+ }
+ size = 4;
+
+ if (rsi_sdio_master_access_msword(adapter, (addr >> 16))) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return -1;
+ }
+ addr = addr & 0xFFFF;
+
+ /* Bringing TA out of reset */
+ if (rsi_sdio_write_register_multiple(adapter,
+ (addr | RSI_SD_REQUEST_MASTER),
+ (u8 *)data_alligned, size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to do AHB reg write\n", __func__);
+ return -1;
+ }
+ return 0;
+}
+
/**
* rsi_sdio_host_intf_write_pkt() - This function writes the packet to device.
* @adapter: Pointer to the adapter structure.
@@ -560,9 +734,9 @@ int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
*
* Return: 0 on success, -1 on failure.
*/
-static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
- u8 *pkt,
- u32 len)
+int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
+ u8 *pkt,
+ u32 len)
{
struct rsi_91x_sdiodev *dev =
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
@@ -585,7 +759,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter,
address,
(u8 *)pkt,
length);
- if (status)
+ if (status < 0)
rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n",
__func__, status);
rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__);
@@ -614,8 +788,8 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter,
status = rsi_sdio_read_register_multiple(adapter,
length,
- length, /*num of bytes*/
- (u8 *)pkt);
+ (u8 *)pkt,
+ length);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__,
@@ -676,8 +850,6 @@ static int rsi_init_sdio_interface(struct rsi_hw *adapter,
}
sdio_release_host(pfunction);
- adapter->host_intf_write_pkt = rsi_sdio_host_intf_write_pkt;
- adapter->host_intf_read_pkt = rsi_sdio_host_intf_read_pkt;
adapter->determine_event_timeout = rsi_sdio_determine_event_timeout;
adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register;
@@ -691,6 +863,17 @@ static int rsi_init_sdio_interface(struct rsi_hw *adapter,
return status;
}
+static struct rsi_host_intf_ops sdio_host_intf_ops = {
+ .write_pkt = rsi_sdio_host_intf_write_pkt,
+ .read_pkt = rsi_sdio_host_intf_read_pkt,
+ .master_access_msword = rsi_sdio_master_access_msword,
+ .master_reg_read = rsi_sdio_master_reg_read,
+ .master_reg_write = rsi_sdio_master_reg_write,
+ .read_reg_multiple = rsi_sdio_read_register_multiple,
+ .write_reg_multiple = rsi_sdio_write_register_multiple,
+ .load_data_master_write = rsi_sdio_load_data_master_write,
+};
+
/**
* rsi_probe() - This function is called by kernel when the driver provided
* Vendor and device IDs are matched. All the initialization
@@ -713,6 +896,8 @@ static int rsi_probe(struct sdio_func *pfunction,
__func__);
return 1;
}
+ adapter->rsi_host_intf = RSI_HOST_INTF_SDIO;
+ adapter->host_intf_ops = &sdio_host_intf_ops;
if (rsi_init_sdio_interface(adapter, pfunction)) {
rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n",
@@ -720,14 +905,6 @@ static int rsi_probe(struct sdio_func *pfunction,
goto fail;
}
- if (rsi_sdio_device_init(adapter->priv)) {
- rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
- sdio_claim_host(pfunction);
- sdio_disable_func(pfunction);
- sdio_release_host(pfunction);
- goto fail;
- }
-
sdio_claim_host(pfunction);
if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
@@ -738,6 +915,14 @@ static int rsi_probe(struct sdio_func *pfunction,
sdio_release_host(pfunction);
rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);
+ if (rsi_hal_device_init(adapter)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
+ sdio_claim_host(pfunction);
+ sdio_disable_func(pfunction);
+ sdio_release_host(pfunction);
+ goto fail;
+ }
+
return 0;
fail:
rsi_91x_deinit(adapter);
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
index 40d7231..c54a534 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -18,6 +18,7 @@
#include <linux/firmware.h>
#include "rsi_sdio.h"
#include "rsi_common.h"
+#include "rsi_hal.h"
/**
* rsi_sdio_master_access_msword() - This function sets the AHB master access
@@ -27,8 +28,8 @@
*
* Return: status: 0 on success, -1 on failure.
*/
-static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
- u16 ms_word)
+int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+ u16 ms_word)
{
u8 byte;
u8 function = 0;
@@ -61,171 +62,6 @@ static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
}
/**
- * rsi_copy_to_card() - This function includes the actual funtionality of
- * copying the TA firmware to the card.Basically this
- * function includes opening the TA file,reading the
- * TA file and writing their values in blocks of data.
- * @common: Pointer to the driver private structure.
- * @fw: Pointer to the firmware value to be written.
- * @len: length of firmware file.
- * @num_blocks: Number of blocks to be written to the card.
- *
- * Return: 0 on success and -1 on failure.
- */
-static int rsi_copy_to_card(struct rsi_common *common,
- const u8 *fw,
- u32 len,
- u32 num_blocks)
-{
- struct rsi_hw *adapter = common->priv;
- struct rsi_91x_sdiodev *dev =
- (struct rsi_91x_sdiodev *)adapter->rsi_dev;
- u32 indx, ii;
- u32 block_size = dev->tx_blk_size;
- u32 lsb_address;
- __le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
- TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
- u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
- TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
- u32 base_address;
- u16 msb_address;
-
- base_address = TA_LOAD_ADDRESS;
- msb_address = base_address >> 16;
-
- for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
- lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
- if (rsi_sdio_write_register_multiple(adapter,
- lsb_address,
- (u8 *)(fw + indx),
- block_size)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to load %s blk\n", __func__,
- FIRMWARE_RSI9113);
- return -1;
- }
- rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
- base_address += block_size;
- if ((base_address >> 16) != msb_address) {
- msb_address += 1;
- if (rsi_sdio_master_access_msword(adapter,
- msb_address)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to set ms word reg\n",
- __func__);
- return -1;
- }
- }
- }
-
- if (len % block_size) {
- lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
- if (rsi_sdio_write_register_multiple(adapter,
- lsb_address,
- (u8 *)(fw + indx),
- len % block_size)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to load f/w\n", __func__);
- return -1;
- }
- }
- rsi_dbg(INIT_ZONE,
- "%s: Succesfully loaded TA instructions\n", __func__);
-
- if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to set ms word to common reg\n",
- __func__);
- return -1;
- }
-
- for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
- /* Bringing TA out of reset */
- if (rsi_sdio_write_register_multiple(adapter,
- (address[ii] |
- RSI_SD_REQUEST_MASTER),
- (u8 *)&data[ii],
- 4)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to hold TA threads\n", __func__);
- return -1;
- }
- }
-
- rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
- return 0;
-}
-
-/**
- * rsi_load_ta_instructions() - This function includes the actual funtionality
- * of loading the TA firmware.This function also
- * includes opening the TA file,reading the TA
- * file and writing their value in blocks of data.
- * @common: Pointer to the driver private structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-static int rsi_load_ta_instructions(struct rsi_common *common)
-{
- struct rsi_hw *adapter = common->priv;
- struct rsi_91x_sdiodev *dev =
- (struct rsi_91x_sdiodev *)adapter->rsi_dev;
- u32 len;
- u32 num_blocks;
- const u8 *fw;
- const struct firmware *fw_entry = NULL;
- u32 block_size = dev->tx_blk_size;
- int status = 0;
- u32 base_address;
- u16 msb_address;
-
- if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to set ms word to common reg\n",
- __func__);
- return -1;
- }
- base_address = TA_LOAD_ADDRESS;
- msb_address = (base_address >> 16);
-
- if (rsi_sdio_master_access_msword(adapter, msb_address)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to set ms word reg\n", __func__);
- return -1;
- }
-
- status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
- if (status < 0) {
- rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
- __func__, FIRMWARE_RSI9113);
- return status;
- }
-
- /* Copy firmware into DMA-accessible memory */
- fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
- if (!fw) {
- status = -ENOMEM;
- goto out;
- }
- len = fw_entry->size;
-
- if (len % 4)
- len += (4 - (len % 4));
-
- num_blocks = (len / block_size);
-
- rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
- rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
-
- status = rsi_copy_to_card(common, fw, len, num_blocks);
- kfree(fw);
-
-out:
- release_firmware(fw_entry);
- return status;
-}
-
-/**
* rsi_process_pkt() - This Function reads rx_blocks register and figures out
* the size of the rx pkt.
* @common: Pointer to the driver private structure.
@@ -472,28 +308,6 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
}
/**
- * rsi_device_init() - This Function Initializes The HAL.
- * @common: Pointer to the driver private structure.
- *
- * Return: 0 on success, -1 on failure.
- */
-int rsi_sdio_device_init(struct rsi_common *common)
-{
- if (rsi_load_ta_instructions(common))
- return -1;
-
- if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
- __func__);
- return -1;
- }
- rsi_dbg(INIT_ZONE,
- "%s: Setting ms word to 0x41050000\n", __func__);
-
- return 0;
-}
-
-/**
* rsi_sdio_read_buffer_status_register() - This function is used to the read
* buffer status register and set
* relevant fields in
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index ef5d394..84ca609 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -1,6 +1,9 @@
/**
* Copyright (c) 2014 Redpine Signals Inc.
*
+ * Developers:
+ * Prameela Rani Garnepudi 2016 <prameela.garnepudi@redpinesignals.com>
+ *
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
@@ -17,6 +20,16 @@
#include <linux/module.h>
#include "rsi_usb.h"
+#include "rsi_hal.h"
+
+static struct rsi_host_intf_ops usb_host_intf_ops = {
+ .write_pkt = rsi_usb_host_intf_write_pkt,
+ .master_reg_read = rsi_usb_master_reg_read,
+ .master_reg_write = rsi_usb_master_reg_write,
+ .read_reg_multiple = rsi_usb_read_register_multiple,
+ .write_reg_multiple = rsi_usb_write_register_multiple,
+ .load_data_master_write = rsi_usb_load_data_master_write,
+};
/**
* rsi_usb_card_write() - This function writes to the USB Card.
@@ -141,6 +154,9 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
return 0;
}
+#define RSI_USB_REQ_OUT (USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE)
+#define RSI_USB_REQ_IN (USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE)
+
/* rsi_usb_reg_read() - This function reads data from given register address.
* @usbdev: Pointer to the usb_device structure.
* @reg: Address of the register to be read.
@@ -151,7 +167,7 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
*/
static int rsi_usb_reg_read(struct usb_device *usbdev,
u32 reg,
- u16 *value,
+ u32 *value,
u16 len)
{
u8 *buf;
@@ -161,10 +177,11 @@ static int rsi_usb_reg_read(struct usb_device *usbdev,
if (!buf)
return status;
+ len = 2;
status = usb_control_msg(usbdev,
usb_rcvctrlpipe(usbdev, 0),
USB_VENDOR_REGISTER_READ,
- USB_TYPE_VENDOR,
+ RSI_USB_REQ_IN,
((reg & 0xffff0000) >> 16), (reg & 0xffff),
(void *)buf,
len,
@@ -193,7 +210,7 @@ static int rsi_usb_reg_read(struct usb_device *usbdev,
*/
static int rsi_usb_reg_write(struct usb_device *usbdev,
u32 reg,
- u16 value,
+ u32 value,
u16 len)
{
u8 *usb_reg_buf;
@@ -211,7 +228,7 @@ static int rsi_usb_reg_write(struct usb_device *usbdev,
status = usb_control_msg(usbdev,
usb_sndctrlpipe(usbdev, 0),
USB_VENDOR_REGISTER_WRITE,
- USB_TYPE_VENDOR,
+ RSI_USB_REQ_OUT,
((reg & 0xffff0000) >> 16),
(reg & 0xffff),
(void *)usb_reg_buf,
@@ -274,6 +291,62 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter)
}
/**
+ * rsi_usb_read_register_multiple() - This function reads multiple
+ * bytes of data from the address.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Read data.
+ * @len: Number of bytes to read.
+ *
+ * Return: status: 0 on success, a negative error code on failure.
+ */
+int rsi_usb_read_register_multiple(struct rsi_hw *adapter,
+ u32 addr,
+ u8 *data,
+ u16 count)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ u8 *buf;
+ u16 transfer;
+ int status = 0;
+
+ if (addr == 0)
+ return -EINVAL;
+
+ buf = kzalloc(4096, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ while (count) {
+ transfer = min_t(int, count, 4096);
+ status = usb_control_msg(dev->usbdev,
+ usb_rcvctrlpipe(dev->usbdev, 0),
+ USB_VENDOR_REGISTER_READ,
+ USB_TYPE_VENDOR,
+ ((addr & 0xffff0000) >> 16),
+ (addr & 0xffff),
+ (void *)buf,
+ transfer,
+ HZ * 5);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE,
+ "Reg read failed with error code :%d\n",
+ status);
+ kfree(buf);
+ return status;
+
+ } else {
+ memcpy(data, buf, transfer);
+ count -= transfer;
+ data += transfer;
+ addr += transfer;
+ }
+ }
+ kfree(buf);
+ return status;
+}
+
+/**
* rsi_usb_write_register_multiple() - This function writes multiple bytes of
* information to multiple registers.
* @adapter: Pointer to the adapter structure.
@@ -286,7 +359,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter)
int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
u32 addr,
u8 *data,
- u32 count)
+ u16 count)
{
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
u8 *buf;
@@ -333,9 +406,9 @@ int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
*
* Return: 0 on success, a negative error code on failure.
*/
-static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
- u8 *pkt,
- u32 len)
+int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
+ u8 *pkt,
+ u32 len)
{
u32 queueno = ((pkt[1] >> 4) & 0xf);
u8 endpoint;
@@ -344,10 +417,76 @@ static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
return rsi_write_multiple(adapter,
endpoint,
- (u8 *)pkt,
+ pkt,
len);
}
+int rsi_usb_master_reg_read(struct rsi_hw *adapter,
+ u32 reg,
+ u32 *value,
+ u16 len)
+{
+ struct usb_device *usbdev =
+ ((struct rsi_91x_usbdev *)adapter->rsi_dev)->usbdev;
+
+ return rsi_usb_reg_read(usbdev, reg, value, len);
+}
+
+int rsi_usb_master_reg_write(struct rsi_hw *adapter,
+ unsigned long reg,
+ unsigned long value,
+ u16 len)
+{
+ struct usb_device *usbdev =
+ ((struct rsi_91x_usbdev *)adapter->rsi_dev)->usbdev;
+
+ return rsi_usb_reg_write(usbdev, reg, value, len);
+}
+
+int rsi_usb_load_data_master_write(struct rsi_hw *adapter,
+ u32 base_address,
+ u32 instructions_sz,
+ u16 block_size,
+ u8 *ta_firmware)
+{
+ u16 num_blocks;
+ u32 cur_indx, ii;
+ u8 temp_buf[256];
+
+ num_blocks = instructions_sz / block_size;
+ rsi_dbg(INFO_ZONE, "num_blocks: %d\n", num_blocks);
+
+ for (cur_indx = 0, ii = 0;
+ ii < num_blocks;
+ ii++, cur_indx += block_size) {
+ memset(temp_buf, 0, block_size);
+ memcpy(temp_buf, ta_firmware + cur_indx, block_size);
+ if ((rsi_usb_write_register_multiple(adapter,
+ base_address,
+ (u8 *)(temp_buf),
+ block_size)) < 0)
+ return -1;
+
+ rsi_dbg(INFO_ZONE, "%s: loading block: %d\n", __func__, ii);
+ base_address += block_size;
+ }
+
+ if (instructions_sz % block_size) {
+ memset(temp_buf, 0, block_size);
+ memcpy(temp_buf, ta_firmware + cur_indx,
+ instructions_sz % block_size);
+ if ((rsi_usb_write_register_multiple(adapter,
+ base_address,
+ (u8 *)temp_buf,
+ instructions_sz % block_size)) < 0)
+ return -1;
+ rsi_dbg(INFO_ZONE,
+ "Written Last Block in Address 0x%x Successfully\n",
+ cur_indx);
+ }
+ return 0;
+}
+
/**
* rsi_deinit_usb_interface() - This function deinitializes the usb interface.
* @adapter: Pointer to the adapter structure.
@@ -413,9 +552,9 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
/* Initializing function callbacks */
adapter->rx_urb_submit = rsi_rx_urb_submit;
- adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
adapter->check_hw_queue_status = rsi_usb_check_queue_status;
adapter->determine_event_timeout = rsi_usb_event_timeout;
+ adapter->host_intf_ops = &usb_host_intf_ops;
rsi_init_event(&rsi_dev->rx_thread.event);
status = rsi_create_kthread(common, &rsi_dev->rx_thread,
@@ -456,7 +595,7 @@ static int rsi_probe(struct usb_interface *pfunction,
{
struct rsi_hw *adapter;
struct rsi_91x_usbdev *dev;
- u16 fw_status;
+ u32 fw_status;
int status;
rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
@@ -467,6 +606,7 @@ static int rsi_probe(struct usb_interface *pfunction,
__func__);
return -ENOMEM;
}
+ adapter->rsi_host_intf = RSI_HOST_INTF_USB;
status = rsi_init_usb_interface(adapter, pfunction);
if (status) {
@@ -480,25 +620,20 @@ static int rsi_probe(struct usb_interface *pfunction,
dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
- if (status)
+ if (status < 0)
goto err1;
else
fw_status &= 1;
if (!fw_status) {
- status = rsi_usb_device_init(adapter->priv);
+ rsi_dbg(INIT_ZONE, "Loading firmware...\n");
+ status = rsi_hal_device_init(adapter);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
__func__);
goto err1;
}
-
- status = rsi_usb_reg_write(dev->usbdev,
- USB_INTERNAL_REG_1,
- RSI_USB_READY_MAGIC_NUM, 1);
- if (status)
- goto err1;
- rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
+ rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
}
status = rsi_rx_urb_submit(adapter);
@@ -554,6 +689,7 @@ static const struct usb_device_id rsi_dev_table[] = {
{ USB_DEVICE(0x041B, 0x0301) },
{ USB_DEVICE(0x041B, 0x0201) },
{ USB_DEVICE(0x041B, 0x9330) },
+ { USB_DEVICE(0x1618, 0x9113) },
{ /* Blank */},
};
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
index de49008..949b572 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -19,67 +19,6 @@
#include "rsi_usb.h"
/**
- * rsi_copy_to_card() - This function includes the actual funtionality of
- * copying the TA firmware to the card.Basically this
- * function includes opening the TA file,reading the TA
- * file and writing their values in blocks of data.
- * @common: Pointer to the driver private structure.
- * @fw: Pointer to the firmware value to be written.
- * @len: length of firmware file.
- * @num_blocks: Number of blocks to be written to the card.
- *
- * Return: 0 on success and -1 on failure.
- */
-static int rsi_copy_to_card(struct rsi_common *common,
- const u8 *fw,
- u32 len,
- u32 num_blocks)
-{
- struct rsi_hw *adapter = common->priv;
- struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
- u32 indx, ii;
- u32 block_size = dev->tx_blk_size;
- u32 lsb_address;
- u32 base_address;
-
- base_address = TA_LOAD_ADDRESS;
-
- for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
- lsb_address = base_address;
- if (rsi_usb_write_register_multiple(adapter,
- lsb_address,
- (u8 *)(fw + indx),
- block_size)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to load %s blk\n", __func__,
- FIRMWARE_RSI9113);
- return -EIO;
- }
- rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
- base_address += block_size;
- }
-
- if (len % block_size) {
- lsb_address = base_address;
- if (rsi_usb_write_register_multiple(adapter,
- lsb_address,
- (u8 *)(fw + indx),
- len % block_size)) {
- rsi_dbg(ERR_ZONE,
- "%s: Unable to load %s blk\n", __func__,
- FIRMWARE_RSI9113);
- return -EIO;
- }
- }
- rsi_dbg(INIT_ZONE,
- "%s: Succesfully loaded %s instructions\n", __func__,
- FIRMWARE_RSI9113);
-
- rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
- return 0;
-}
-
-/**
* rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
* the USB device.
* @common: Pointer to the driver private structure.
@@ -103,83 +42,20 @@ void rsi_usb_rx_thread(struct rsi_common *common)
if (status) {
rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
mutex_unlock(&common->tx_rxlock);
- return;
+ break;
}
mutex_unlock(&common->tx_rxlock);
rsi_reset_event(&dev->rx_thread.event);
if (adapter->rx_urb_submit(adapter)) {
rsi_dbg(ERR_ZONE,
"%s: Failed in urb submission", __func__);
- return;
+ break;
}
} while (1);
out:
rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
+ atomic_inc(&dev->rx_thread.thread_done);
complete_and_exit(&dev->rx_thread.completion, 0);
}
-
-/**
- * rsi_load_ta_instructions() - This function includes the actual funtionality
- * of loading the TA firmware.This function also
- * includes opening the TA file,reading the TA
- * file and writing their value in blocks of data.
- * @common: Pointer to the driver private structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-static int rsi_load_ta_instructions(struct rsi_common *common)
-{
- struct rsi_hw *adapter = common->priv;
- struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
- const struct firmware *fw_entry = NULL;
- u32 block_size = dev->tx_blk_size;
- const u8 *fw;
- u32 num_blocks, len;
- int status = 0;
-
- status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
- if (status < 0) {
- rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
- __func__, FIRMWARE_RSI9113);
- return status;
- }
-
- /* Copy firmware into DMA-accessible memory */
- fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
- if (!fw) {
- status = -ENOMEM;
- goto out;
- }
- len = fw_entry->size;
-
- if (len % 4)
- len += (4 - (len % 4));
-
- num_blocks = (len / block_size);
-
- rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
- rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
-
- status = rsi_copy_to_card(common, fw, len, num_blocks);
- kfree(fw);
-
-out:
- release_firmware(fw_entry);
- return status;
-}
-
-/**
- * rsi_device_init() - This Function Initializes The HAL.
- * @common: Pointer to the driver private structure.
- *
- * Return: 0 on success, -1 on failure.
- */
-int rsi_usb_device_init(struct rsi_common *common)
-{
- if (rsi_load_ta_instructions(common))
- return -EIO;
-
- return 0;
- }
diff --git a/drivers/net/wireless/rsi/rsi_common.h b/drivers/net/wireless/rsi/rsi_common.h
index d3fbe33..8c8cad4 100644
--- a/drivers/net/wireless/rsi/rsi_common.h
+++ b/drivers/net/wireless/rsi/rsi_common.h
@@ -63,6 +63,7 @@ static inline int rsi_create_kthread(struct rsi_common *common,
u8 *name)
{
init_completion(&thread->completion);
+ atomic_set(&thread->thread_done, 0);
thread->task = kthread_run(func_ptr, common, "%s", name);
if (IS_ERR(thread->task))
return (int)PTR_ERR(thread->task);
@@ -72,6 +73,9 @@ static inline int rsi_create_kthread(struct rsi_common *common,
static inline int rsi_kill_thread(struct rsi_thread *handle)
{
+ if (atomic_read(&handle->thread_done) > 0)
+ return 0;
+
atomic_inc(&handle->thread_done);
rsi_set_event(&handle->event);
diff --git a/drivers/net/wireless/rsi/rsi_hal.h b/drivers/net/wireless/rsi/rsi_hal.h
new file mode 100644
index 0000000..f9e0fe3
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_hal.h
@@ -0,0 +1,150 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HAL_H__
+#define __RSI_HAL_H__
+
+#define TA_LOAD_ADDRESS 0x00
+#define FIRMWARE_RSI9113 "rsi_91x.fw"
+#define FLASH_WRITE_CHUNK_SIZE (4 * 1024)
+#define USB_FLASH_READ_CHUNK_SIZE ((2 * 1024) - 4)
+#define SDIO_FLASH_READ_CHUNK_SIZE (2 * 1024)
+#define FLASH_SECTOR_SIZE (4 * 1024)
+#define STARTING_BLOCK_INDEX 0
+#define FLASH_BLOCK_SIZE (32 * 1024)
+
+#define FLASH_SIZE_ADDR 0x04000016
+#define PING_BUFFER_ADDRESS 0x19000
+#define PONG_BUFFER_ADDRESS 0x1a000
+#define SWBL_REGIN 0x41050034
+#define SWBL_REGOUT 0x4105003c
+#define PING_WRITE 0x1
+#define PONG_WRITE 0x2
+
+#define BL_CMD_TIMEOUT 500
+#define BL_BURN_TIMEOUT (40 * 1000)
+
+#define MASTER_READ_MODE 1
+#define EEPROM_READ_MODE 2
+
+#define REGIN_VALID 0xA
+#define REGIN_INPUT 0xA0
+#define REGOUT_VALID 0xAB
+#define REGOUT_INVALID (~0xAB)
+#define CMD_PASS 0xAA
+#define CMD_FAIL 0xCC
+#define INVALID_ADDR 0x4C
+
+#define BURN_BL 0x23
+#define LOAD_HOSTED_FW 'A'
+#define BURN_HOSTED_FW 'B'
+#define PING_VALID 'I'
+#define PONG_VALID 'O'
+#define PING_AVAIL 'I'
+#define PONG_AVAIL 'O'
+#define EOF_REACHED 'E'
+#define CHECK_CRC 'K'
+#define POLLING_MODE 'P'
+#define CONFIG_AUTO_READ_MODE 'R'
+#define JUMP_TO_ZERO_PC 'J'
+#define FW_LOADING_SUCCESSFUL 'S'
+#define LOADING_INITIATED '1'
+
+/* Boot loader commands */
+#define HOST_INTF_REG_OUT 0x4105003C
+#define HOST_INTF_REG_IN 0x41050034
+#define BOARD_READY 0xABCD
+#define REG_READ 0xD1
+#define REG_WRITE 0xD2
+#define SEND_RPS_FILE '2'
+#define BOOTUP_OPTIONS_LAST_CONFIG_NOT_SAVED 0xF1
+#define BOOTUP_OPTIONS_CHECKSUM_FAIL 0xF2
+#define INVALID_OPTION 0xF3
+#define CHECKSUM_SUCCESS 0xAA
+#define CHECKSUM_FAILURE 0xCC
+#define CHECKSUM_INVALID_ADDRESS 0x4C
+
+#define EEPROM_VERSION_OFFSET 77
+#define CALIB_CRC_OFFSET 4092
+#define MAGIC_WORD 0x5A
+#define MAGIC_WORD_OFFSET_1 40
+#define MAGIC_WORD_OFFSET_2 424
+#define FW_IMAGE_MIN_ADDRESS (68 * 1024)
+#define FLASH_MAX_ADDRESS (4 * 1024 * 1024) //4MB
+#define MAX_FLASH_FILE_SIZE (400 * 1024) //400K
+#define FLASHING_START_ADDRESS 16
+#define CALIB_VALUES_START_ADDR 16
+#define SOC_FLASH_ADDR 0x04000000
+#define EEPROM_DATA_SIZE 4096
+#define CALIB_DATA_SIZE (EEPROM_DATA_SIZE - CALIB_VALUES_START_ADDR)
+#define BL_HEADER 32
+
+#define BT_CARD_READY_IND 0x89
+#define WLAN_CARD_READY_IND 0x0
+#define COMMON_HAL_CARD_READY_IND 0x0
+#define ZIGB_CARD_READY_IND 0xff
+
+#define COMMAN_HAL_WAIT_FOR_CARD_READY 1
+#define COMMON_HAL_SEND_CONFIG_PARAMS 2
+#define COMMON_HAL_TX_ACCESS 3
+#define COMMON_HAL_WAIT_FOR_PROTO_CARD_READY 4
+#define HEX_FILE 1
+#define BIN_FILE 0
+#define UNIX_FILE_TYPE 8
+#define DOS_FILE_TYPE 9
+#define LMAC_INSTRUCTIONS_SIZE (16 * 1024) /* 16Kbytes */
+
+#define ULP_RESET_REG 0x161
+#define WATCH_DOG_TIMER_1 0x16c
+#define WATCH_DOG_TIMER_2 0x16d
+#define WATCH_DOG_DELAY_TIMER_1 0x16e
+#define WATCH_DOG_DELAY_TIMER_2 0x16f
+#define WATCH_DOG_TIMER_ENABLE 0x170
+
+#define RESTART_WDT BIT(11)
+#define BYPASS_ULP_ON_WDT BIT(1)
+
+#define RF_SPI_PROG_REG_BASE_ADDR 0x40080000
+
+#define GSPI_CTRL_REG0 (RF_SPI_PROG_REG_BASE_ADDR)
+#define GSPI_CTRL_REG1 (RF_SPI_PROG_REG_BASE_ADDR + 0x2)
+#define GSPI_DATA_REG0 (RF_SPI_PROG_REG_BASE_ADDR + 0x4)
+#define GSPI_DATA_REG1 (RF_SPI_PROG_REG_BASE_ADDR + 0x6)
+#define GSPI_DATA_REG2 (RF_SPI_PROG_REG_BASE_ADDR + 0x8)
+
+#define GSPI_DMA_MODE BIT(13)
+
+#define GSPI_2_ULP BIT(12)
+#define GSPI_TRIG BIT(7)
+#define GSPI_READ BIT(6)
+#define GSPI_RF_SPI_ACTIVE BIT(8)
+
+struct bl_header {
+ u32 flags;
+ u32 image_no;
+ u32 check_sum;
+ u32 flash_start_address;
+ u32 flash_len;
+} __packed;
+
+struct ta_metadata {
+ char *name;
+ unsigned int address;
+};
+
+int rsi_hal_device_init(struct rsi_hw *adapter);
+
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
index dcd0957..752c429 100644
--- a/drivers/net/wireless/rsi/rsi_main.h
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -204,10 +204,43 @@ struct rsi_common {
struct cqm_info cqm_info;
bool hw_data_qs_blocked;
+
+ u8 coex_mode;
+};
+
+enum host_intf {
+ RSI_HOST_INTF_SDIO = 0,
+ RSI_HOST_INTF_USB
+};
+
+enum rsi_dev_model {
+ RSI_DEV_9110 = 0,
+ RSI_DEV_9113,
+ RSI_DEV_9116
+};
+
+struct eepromrw_info {
+ u32 offset;
+ u32 length;
+ u8 write;
+ u16 eeprom_erase;
+ u8 data[480];
+};
+
+struct eeprom_read {
+ u16 length;
+ u16 off_set;
+};
+
+struct xtended_desc {
+ u8 confirm_frame_type;
+ u8 retry_cnt;
+ u16 reserved;
};
struct rsi_hw {
struct rsi_common *priv;
+ enum rsi_dev_model device_model;
struct ieee80211_hw *hw;
struct ieee80211_vif *vifs[RSI_MAX_VIFS];
struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];
@@ -215,16 +248,47 @@ struct rsi_hw {
struct device *device;
u8 sc_nvifs;
+ enum host_intf rsi_host_intf;
#ifdef CONFIG_RSI_DEBUGFS
struct rsi_debugfs *dfsentry;
u8 num_debugfs_entries;
#endif
+
+ struct timer_list bl_cmd_timer;
+ u8 blcmd_timer_expired;
+ u32 flash_capacity;
+ u32 tx_blk_size;
+ u32 common_hal_fsm;
+ u8 eeprom_init;
+ struct eepromrw_info eeprom;
+ u8 *calib_data;
+ u32 interrupt_status;
+
void *rsi_dev;
- int (*host_intf_read_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
- int (*host_intf_write_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+
+ struct rsi_host_intf_ops *host_intf_ops;
int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num);
int (*rx_urb_submit)(struct rsi_hw *adapter);
int (*determine_event_timeout)(struct rsi_hw *adapter);
};
+
+struct rsi_host_intf_ops {
+ int (*read_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+ int (*write_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+ int (*master_access_msword)(struct rsi_hw *adapter, u16 ms_word);
+ int (*read_reg_multiple)(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u16 count);
+ int (*write_reg_multiple)(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u16 count);
+ int (*master_reg_read)(struct rsi_hw *adapter, u32 addr,
+ u32 *read_buf, u16 size);
+ int (*master_reg_write)(struct rsi_hw *adapter,
+ unsigned long addr, unsigned long data,
+ u16 size);
+ int (*load_data_master_write)(struct rsi_hw *adapter, u32 addr,
+ u32 instructions_size, u16 block_size,
+ u8 *fw);
+};
+
#endif
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index 3741173..f8823126 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -62,6 +62,7 @@
#define RF_RESET_ENABLE BIT(3)
#define RATE_INFO_ENABLE BIT(0)
#define RSI_BROADCAST_PKT BIT(9)
+#define RSI_DESC_REQUIRE_CFM_TO_HOST BIT(10)
#define UPPER_20_ENABLE (0x2 << 12)
#define LOWER_20_ENABLE (0x4 << 12)
@@ -306,4 +307,5 @@ void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb);
int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb);
int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
int rsi_band_check(struct rsi_common *common);
+int rsi_flash_read(struct rsi_hw *adapter);
#endif
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h
index c7e8f2b..6a747c5 100644
--- a/drivers/net/wireless/rsi/rsi_sdio.h
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -118,11 +118,25 @@ void rsi_interrupt_handler(struct rsi_hw *adapter);
int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
int rsi_sdio_device_init(struct rsi_common *common);
int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
-int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function,
u32 addr, u8 *data);
+int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
+int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, u8 *pkt, u32 len);
+int rsi_sdio_read_register_multiple(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u16 count);
int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr,
- u8 *data, u32 count);
+ u8 *data, u16 count);
+int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+ u16 ms_word);
+int rsi_sdio_load_data_master_write(struct rsi_hw *adapter,
+ u32 base_address, u32 instructions_sz,
+ u16 block_size, u8 *ta_firmware);
+int rsi_sdio_master_reg_read(struct rsi_hw *adapter, u32 addr,
+ u32 *read_buf, u16 size);
+int rsi_sdio_master_reg_write(struct rsi_hw *adapter,
+ unsigned long addr,
+ unsigned long data,
+ u16 size);
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit);
int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter);
int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num);
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index ebea0c4..d21d40d 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -62,7 +62,19 @@ static inline int rsi_usb_event_timeout(struct rsi_hw *adapter)
}
int rsi_usb_device_init(struct rsi_common *common);
+int rsi_usb_read_register_multiple(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u16 count);
int rsi_usb_write_register_multiple(struct rsi_hw *adapter, u32 addr,
- u8 *data, u32 count);
+ u8 *data, u16 count);
void rsi_usb_rx_thread(struct rsi_common *common);
+
+int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter, u8 *pkt, u32 len);
+int rsi_usb_master_reg_read(struct rsi_hw *adapter, u32 reg,
+ u32 *value, u16 len);
+int rsi_usb_master_reg_write(struct rsi_hw *adapter, unsigned long reg,
+ unsigned long value, u16 len);
+int rsi_usb_load_data_master_write(struct rsi_hw *adapter, u32 base_address,
+ u32 instructions_sz,
+ u16 block_size,
+ u8 *ta_firmware);
#endif
--
2.4.11
^ permalink raw reply related
* Re: [PATCH][RFC] nl80211/mac80211: Rounded RSSI reporting
From: Johannes Berg @ 2016-10-21 8:30 UTC (permalink / raw)
To: Andrew Zaborowski, linux-wireless
In-Reply-To: <1477010947-6207-1-git-send-email-andrew.zaborowski@intel.com>
Hi,
> Userspace tends to display a wifi icon with the rssi shown as a
> number of "signal bars", usually 4, 5, or 6.
It's actually not clear to me that this is really how it should be.
There's a point to be made that taking a more holistic "link quality"
would be a better choice. That's related, but maybe can be a separate
discussion.
> and a hysteresis value to be used in the same way as with the
> NL80211_ATTR_CQM_RSSI_THOLD attribute, or even modify it to allow
> multiple thresholds to be given but that would need a problematic
> driver api change. What would be the best way to do that?
So ... I don't think there's a good way to do this at all.
The problem is that you really want this to be offloaded to the device,
*especially* if you care about low power usage, because you absolutely
don't want to be processing each beacon (which is typically what we
derive the data from today) in the host CPU - you want those to be
filtered by the device so you don't wake up the host CPU every ~102ms.
Without offloading to the device, your patch is actually fairly much
pointless, because you've already woken up the host CPU, at which point
punting to userspace probably isn't all that much more expensive over
the cost of waking up the CPU in the first place.
Looking at the code, it seems like only a single driver could support
this in a pseudo-offloaded fashion (iwlmvm), where all the others that
offload it today would not be able to support this API at all, unless
they fall back to complete software processing which, as I wrote above,
will have far worse power consumption consequences.
Therefore, adding this API just for mac80211 seems pretty pointless,
especially since you're targeting this for IoT, where I expect people
will be using full-MAC chips rather than soft-MAC, with the consequence
of not even using mac80211-based drivers. Oops.
> The assumption is that you can't simulate the same behavior with just
> the current NL80211_ATTR_CQM_RSSI_THOLD attribute.
Is that true? Technically, it seems that perhaps if you wanted to have
a few ranges, you could always pick one that's currently active, and
program that into the driver/device, with a hysteresis big enough to
extend to the edges of the next range, or something?
Let's say you're currently sitting at -50dBm, and want your ranges to
be -100..-80..-60..-40..-20. Then you could program -50dBm with
hysteresis of 10dBm, and it'd tell you when you move below/above?
This probably won't really work, the hysteresis probably won't be
honoured precisely enough by all drivers. Or we can just fix the
drivers, I guess. However, if you're just at the edge of your range,
e.g. when your current signal strength is -60dBm, you'd still flip-flop
in and out of that range continuously, although userspace could just
program a different threshold/hysteresis for those cases as well.
Anyway, not sure this can be made to work, and drivers would play ball.
Nevertheless, somewhere along these lines we could probably make things
work better than hard-coding the kind of assumptions you have in your
patch. Perhaps by extending this to know about low/medium/high, which a
number of drivers seem to support, so that you can program -60,-40
(with some appropriate hysteresis) and then get a signal when you move
out of that range towards low or towards high. When that's stable
enough, you can then dynamically reconfigure to the next range.
johannes
^ permalink raw reply
* Re: [PATCH] cfg80211: add generic helper to check interface is running
From: Johannes Berg @ 2016-10-21 7:55 UTC (permalink / raw)
To: Arend van Spriel; +Cc: linux-wireless
In-Reply-To: <1476990502-32472-1-git-send-email-arend.vanspriel@broadcom.com>
On Thu, 2016-10-20 at 20:08 +0100, Arend van Spriel wrote:
> Adding a helper using wdev to check if interface is running. This
> deals with both non-netdev and netdev interfaces. In struct
> wireless_dev replacing 'p2p_started' and 'nan_started' by
> 'is_running' as those are mutual exclusive anyway.
Applied, thanks.
I renamed the helper to just wdev_running() because we also have
sdata_running() in mac80211.
johannes
^ permalink raw reply
* Re: [PATCH] cfg80211: allow vendor commands to be sent to nan interface
From: Arend Van Spriel @ 2016-10-21 7:50 UTC (permalink / raw)
To: Johannes Berg, Luca Coelho
Cc: linux-wireless, Andrei Otcheretianski, Luca Coelho
In-Reply-To: <1476967536.4929.23.camel@sipsolutions.net>
On 20-10-2016 14:45, Johannes Berg wrote:
> On Thu, 2016-10-20 at 14:44 +0200, Arend Van Spriel wrote:
>>
>> Sure. On top of this patch or will you deal with those conflicts?
>>
>
> I already applied this, so on top please (i.e. just resend what you
> just had, with a commit message?)
Yup. Did not check/realize/whatever. I send it out yesterday [1].
Regards,
Arend
[1] https://patchwork.kernel.org/patch/9387467/
^ permalink raw reply
* Re: [PATCH v4] mwifiex: parse device tree node for PCIe
From: Brian Norris @ 2016-10-21 2:06 UTC (permalink / raw)
To: Rajat Jain
Cc: linux-wireless, devicetree, Xinming Hu, Amitkumar Karwar,
Brian Norris, Kalle Valo, Rob Herring, rajatxjain
In-Reply-To: <1477009812-95032-1-git-send-email-rajatja@google.com>
On Thu, Oct 20, 2016 at 05:30:12PM -0700, Rajat Jain wrote:
> From: Xinming Hu <huxm@marvell.com>
>
> This patch derives device tree node from pcie bus layer framework.
> Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
> marvell-8xxx.txt) to accomodate PCIe changes.
>
> Signed-off-by: Xinming Hu <huxm@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
> Signed-off-by: Rajat Jain <rajatja@google.com>
> ---
> Since I need this patch and haven't seen updates, I thought I'll take a stab.
>
> v2: Included vendor and product IDs in compatible strings for PCIe
> chipsets(Rob Herring)
> v3: Patch is created using -M option so that it will only include diff of
> original and renamed files(Rob Herring)
> Resend v3: Resending the patch because I missed to include device tree mailing
> while sending v3.
> v4: Fix error handling, also move-on even if no device tree node is present.
>
> .../{marvell-sd8xxx.txt => marvell-8xxx.txt} | 8 +++--
> drivers/net/wireless/marvell/mwifiex/pcie.c | 39 +++++++++++++++++++---
> drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 3 +-
> 3 files changed, 42 insertions(+), 8 deletions(-)
> rename Documentation/devicetree/bindings/net/wireless/{marvell-sd8xxx.txt => marvell-8xxx.txt} (91%)
Patch looks better to me (esp. the error handling):
Reviewed-by: Brian Norris <briannorris@chromium.org>
> diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> similarity index 91%
> rename from Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
> rename to Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> index c421aba..dfe5f8e 100644
> --- a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> @@ -1,8 +1,8 @@
> -Marvell 8897/8997 (sd8897/sd8997) SDIO devices
> +Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
> ------
>
> -This node provides properties for controlling the marvell sdio wireless device.
> -The node is expected to be specified as a child node to the SDIO controller that
> +This node provides properties for controlling the marvell sdio/pcie wireless device.
> +The node is expected to be specified as a child node to the SDIO/PCIE controller that
> connects the device to the system.
>
> Required properties:
> @@ -10,6 +10,8 @@ Required properties:
> - compatible : should be one of the following:
> * "marvell,sd8897"
> * "marvell,sd8997"
> + * "pci11ab,2b42"
> + * "pci1b4b,2b42"
>
> Optional properties:
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
> index 3c3c4f1..b3e6f06 100644
> --- a/drivers/net/wireless/marvell/mwifiex/pcie.c
> +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
> @@ -37,6 +37,22 @@ static struct mwifiex_if_ops pcie_ops;
>
> static struct semaphore add_remove_card_sem;
>
> +static const struct of_device_id mwifiex_pcie_of_match_table[] = {
> + { .compatible = "pci11ab,2b42" },
> + { .compatible = "pci1b4b,2b42" },
> + { }
> +};
> +
> +static int mwifiex_pcie_probe_of(struct device *dev)
> +{
> + if (!of_match_node(mwifiex_pcie_of_match_table, dev->of_node)) {
> + pr_err("pcie device node not available");
> + return -1;
Not a big fan of these '-1' error codes, instead or proper error codes.
But that's preexisting. (Or at least, this matches the sdio.c version.)
> + }
> +
> + return 0;
> +}
> +
> static int
> mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
> size_t size, int flags)
> @@ -178,6 +194,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> {
> struct pcie_service_card *card;
> + int ret;
>
> pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
> pdev->vendor, pdev->device, pdev->revision);
> @@ -199,13 +216,27 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
> card->pcie.can_ext_scan = data->can_ext_scan;
> }
>
> - if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
> - MWIFIEX_PCIE)) {
> - pr_err("%s failed\n", __func__);
> - return -1;
> + /* device tree node parsing and platform specific configuration*/
> + if (pdev->dev.of_node) {
> + ret = mwifiex_pcie_probe_of(&pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "required compatible string missing\n");
> + goto err_free;
> + }
> }
>
> + ret = mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
> + MWIFIEX_PCIE);
> + if (ret) {
> + pr_err("%s failed\n", __func__);
> + goto err_free;
> + }
> return 0;
> +
> +err_free:
> + kfree(card);
Is it just me, or does this fix a memory leak too? Not a big deal IMO,
but maybe worth noting.
Brian
> + return ret;
> }
>
> /*
> diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> index 2a162c3..c8dccf5 100644
> --- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> +++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
> @@ -2218,7 +2218,8 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
> * The cal-data can be read from device tree and/or
> * a configuration file and downloaded to firmware.
> */
> - if (priv->adapter->iface_type == MWIFIEX_SDIO &&
> + if ((priv->adapter->iface_type == MWIFIEX_SDIO ||
> + priv->adapter->iface_type == MWIFIEX_PCIE) &&
> adapter->dev->of_node) {
> adapter->dt_node = adapter->dev->of_node;
> if (of_property_read_u32(adapter->dt_node,
> --
> 2.8.0.rc3.226.g39d4020
>
^ permalink raw reply
* [PATCH][RFC] nl80211/mac80211: Rounded RSSI reporting
From: Andrew Zaborowski @ 2016-10-21 0:49 UTC (permalink / raw)
To: linux-wireless
Hi,
I'm looking for a way to enable userspace to receive RSSI updates
without polling and waking up only as often as needed, for use in a
wifi daemon oriented for low power. Userspace tends to display a wifi
icon with the rssi shown as a number of "signal bars", usually 4, 5,
or 6. This patch adds an nl80211 CQM command and an event to report
exactly this information and nothing more. The
NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS attribute is used to set how many
bars are used and assumes -100dbm to be the minimum. It's not very
flexible. It may be better, for example to accept a list of thresholds
and a hysteresis value to be used in the same way as with the
NL80211_ATTR_CQM_RSSI_THOLD attribute, or even modify it to allow
multiple thresholds to be given but that would need a problematic
driver api change. What would be the best way to do that?
The assumption is that you can't simulate the same behavior with just
the current NL80211_ATTR_CQM_RSSI_THOLD attribute.
Best regards
---
include/net/cfg80211.h | 21 ++++++++++++++++++
include/net/mac80211.h | 4 ++++
include/uapi/linux/nl80211.h | 10 +++++++++
net/mac80211/cfg.c | 18 +++++++++++++++
net/mac80211/ieee80211_i.h | 11 ++++++++--
net/mac80211/mlme.c | 27 +++++++++++++++++++++++
net/wireless/nl80211.c | 52 ++++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 11 ++++++++++
net/wireless/trace.h | 33 ++++++++++++++++++++++++++++
9 files changed, 185 insertions(+), 2 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bd19faa..3487b3f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2606,6 +2606,10 @@ struct cfg80211_nan_func {
* disabled.)
* @set_cqm_txe_config: Configure connection quality monitor TX error
* thresholds.
+ * @set_cqm_rssi_steps: Configure number of RSSI levels for the connection
+ * quality monitor to use in deciding when to send rounded RSSI change
+ * events. After configuration, the driver should (soon) send an event
+ * indicating the current level out of the number of levels set.
* @sched_scan_start: Tell the driver to start a scheduled scan.
* @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
* call must stop the scheduled scan and be ready for starting a new one
@@ -2891,6 +2895,9 @@ struct cfg80211_ops {
struct net_device *dev,
u32 rate, u32 pkts, u32 intvl);
+ int (*set_cqm_rssi_steps)(struct wiphy *wiphy,
+ struct net_device *dev, u32 steps);
+
void (*mgmt_frame_register)(struct wiphy *wiphy,
struct wireless_dev *wdev,
u16 frame_type, bool reg);
@@ -5213,6 +5220,20 @@ void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer,
void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp);
/**
+ * cfg80211_cqm_rounded_rssi_notify - connection quality monitoring rssi event
+ * @dev: network device
+ * @signal_level: the signal level in the range of 0 to (steps - 1)
+ * @gfp: context flags
+ *
+ * This function is called when the RSSI level, rounded to the resolution
+ * set by cfg80211_ops::set_cqm_rssi_steps, has changed. In other words
+ * the RSSI value has gone from one of the equally sized intervals, covering
+ * the range of -100dBm to 0, to another.
+ */
+void cfg80211_cqm_rounded_rssi_notify(struct net_device *dev,
+ u32 signal_level, gfp_t gfp);
+
+/**
* cfg80211_radar_event - radar detection event
* @wiphy: the wiphy
* @chandef: chandef for the current channel
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a810dfc..5fbe275 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -503,6 +503,9 @@ struct ieee80211_mu_group_data {
* cause an event to be sent indicating where the current value is in
* relation to the newly configured threshold.
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ * @cqm_rssi_steps: Connection quality monitor's number of RSSI levels to
+ * use when sending rounded RSSI change events. A zero value implies this
+ * event is disabled.
* @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
* may filter ARP queries targeted for other addresses than listed here.
* The driver must allow ARP queries targeted for all address listed here
@@ -554,6 +557,7 @@ struct ieee80211_bss_conf {
u16 ht_operation_mode;
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
+ u32 cqm_rssi_steps;
struct cfg80211_chan_def chandef;
struct ieee80211_mu_group_data mu_group;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 56368e9..a2c8817 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3859,6 +3859,14 @@ enum nl80211_ps_state {
* %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
* @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
* loss event
+ * @NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS: number of evenly spaced RSSI ranges
+ * to be distinguished between -100 dBm and 0. %NL80211_CMD_NOTIFY_CQM
+ * events will be sent when the RSSI value crosses from one range of
+ * values to another. Set to 0 to disable
+ * %NL80211_ATTR_CQM_ROUNDED_RSSI_EVENT reporting.
+ * @NL80211_ATTR_CQM_ROUNDED_RSSI_EVENT: the RSSI level with range reduced to
+ * 0 to steps - 1 as configured in %NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS
+ * value.
* @__NL80211_ATTR_CQM_AFTER_LAST: internal
* @NL80211_ATTR_CQM_MAX: highest key attribute
*/
@@ -3872,6 +3880,8 @@ enum nl80211_attr_cqm {
NL80211_ATTR_CQM_TXE_PKTS,
NL80211_ATTR_CQM_TXE_INTVL,
NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
+ NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS,
+ NL80211_ATTR_CQM_ROUNDED_RSSI_EVENT,
/* keep last */
__NL80211_ATTR_CQM_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fd6541f..73550a7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2657,6 +2657,23 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
return 0;
}
+static int ieee80211_set_cqm_rssi_steps(struct wiphy *wiphy,
+ struct net_device *dev,
+ u32 steps)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_vif *vif = &sdata->vif;
+ struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+
+ if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
+ return -EOPNOTSUPP;
+
+ bss_conf->cqm_rssi_steps = steps;
+ sdata->u.mgd.last_cqm_event_rounded_rssi = 0;
+
+ return 0;
+}
+
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr,
@@ -3645,6 +3662,7 @@ const struct cfg80211_ops mac80211_config_ops = {
.mgmt_tx = ieee80211_mgmt_tx,
.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait,
.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
+ .set_cqm_rssi_steps = ieee80211_set_cqm_rssi_steps,
.mgmt_frame_register = ieee80211_mgmt_frame_register,
.set_antenna = ieee80211_set_antenna,
.get_antenna = ieee80211_get_antenna,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 34c2add..1c04c21 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -507,12 +507,19 @@ struct ieee80211_if_managed {
/*
* Last Beacon frame signal strength average (ave_beacon_signal / 16)
- * that triggered a cqm event. 0 indicates that no event has been
- * generated for the current association.
+ * that triggered a cqm RSSI threshold-crossed event. 0 indicates
+ * that no event has been generated for the current association.
*/
int last_cqm_event_signal;
/*
+ * Last Beacon frame signal strength average (ave_beacon_signal / 16)
+ * that triggered a cqm rounded RSSI level event. 0 indicates that no
+ * event has been generated for the current association.
+ */
+ int last_cqm_event_rounded_rssi;
+
+ /*
* State variables for keeping track of RSSI of the AP currently
* connected to and informing driver when RSSI has gone
* below/above a certain threshold.
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7486f2d..a87422b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3253,6 +3253,14 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
ieee80211_reset_ap_probe(sdata);
}
+static void ieee80211_cqm_rounded_rssi_notify(struct ieee80211_vif *vif,
+ u32 signal_level, gfp_t gfp)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ cfg80211_cqm_rounded_rssi_notify(sdata->dev, signal_level, gfp);
+}
+
/*
* This is the canonical list of information elements we care about,
* the filter code also gives us all changes to the Microsoft OUI
@@ -3416,6 +3424,25 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
}
}
+ if (bss_conf->cqm_rssi_steps &&
+ ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
+ int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
+ int last_event = ifmgd->last_cqm_event_rounded_rssi;
+ int steps = bss_conf->cqm_rssi_steps;
+ int last_level = (last_event + 100) * steps / 100;
+ int cur_level = (sig + 100) * steps / 100;
+ /* Use a threshold of 1/4th of the step size (100dBm / steps) */
+ int thold = 25 / steps;
+
+ if (last_event == 0 ||
+ (cur_level < last_level && sig < last_event - thold) ||
+ (cur_level > last_level && sig > last_event + thold)) {
+ ifmgd->last_cqm_event_rounded_rssi = sig;
+ ieee80211_cqm_rounded_rssi_notify(
+ &sdata->vif, cur_level, GFP_KERNEL);
+ }
+ }
+
if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
mlme_dbg_ratelimited(sdata,
"cancelling AP probe due to a received beacon\n");
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c510810..5bfc853 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -9278,6 +9278,8 @@ nl80211_attr_cqm_policy[NL80211_ATTR_CQM_MAX + 1] = {
[NL80211_ATTR_CQM_TXE_RATE] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_TXE_PKTS] = { .type = NLA_U32 },
[NL80211_ATTR_CQM_TXE_INTVL] = { .type = NLA_U32 },
+ [NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS] = { .type = NLA_U32 },
+ [NL80211_ATTR_CQM_ROUNDED_RSSI_EVENT] = { .type = NLA_U32 },
};
static int nl80211_set_cqm_txe(struct genl_info *info,
@@ -9324,6 +9326,25 @@ static int nl80211_set_cqm_rssi(struct genl_info *info,
return rdev_set_cqm_rssi_config(rdev, dev, threshold, hysteresis);
}
+static int nl80211_set_cqm_rounded_rssi_steps(struct genl_info *info, u32 steps)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+ if (steps == 1)
+ return -EINVAL;
+
+ if (!rdev->ops->set_cqm_rssi_steps)
+ return -EOPNOTSUPP;
+
+ if (wdev->iftype != NL80211_IFTYPE_STATION &&
+ wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)
+ return -EOPNOTSUPP;
+
+ return rdev_set_cqm_rssi_steps(rdev, dev, steps);
+}
+
static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *attrs[NL80211_ATTR_CQM_MAX + 1];
@@ -9357,6 +9378,13 @@ static int nl80211_set_cqm(struct sk_buff *skb, struct genl_info *info)
return nl80211_set_cqm_txe(info, rate, pkts, intvl);
}
+ if (attrs[NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS]) {
+ u32 steps = nla_get_u32(
+ attrs[NL80211_ATTR_CQM_ROUNDED_RSSI_STEPS]);
+
+ return nl80211_set_cqm_rounded_rssi_steps(info, steps);
+ }
+
return -EINVAL;
}
@@ -13832,6 +13860,30 @@ void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp)
}
EXPORT_SYMBOL(cfg80211_cqm_beacon_loss_notify);
+void cfg80211_cqm_rounded_rssi_notify(struct net_device *dev,
+ u32 signal_level, gfp_t gfp)
+{
+ struct sk_buff *msg;
+
+ trace_cfg80211_cqm_rounded_rssi_notify(dev, signal_level);
+
+ msg = cfg80211_prepare_cqm(dev, NULL, gfp);
+ if (!msg)
+ return;
+
+ if (nla_put_u32(msg, NL80211_ATTR_CQM_ROUNDED_RSSI_EVENT,
+ signal_level))
+ goto nla_put_failure;
+
+ cfg80211_send_cqm(msg, gfp);
+
+ return;
+
+ nla_put_failure:
+ nlmsg_free(msg);
+}
+EXPORT_SYMBOL(cfg80211_cqm_rounded_rssi_notify);
+
static void nl80211_gtk_rekey_notify(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *replay_ctr, gfp_t gfp)
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 11cf83c..3521a2f 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -737,6 +737,17 @@ rdev_set_cqm_txe_config(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int
+rdev_set_cqm_rssi_steps(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, u32 steps)
+{
+ int ret;
+ trace_rdev_set_cqm_rssi_steps(&rdev->wiphy, dev, steps);
+ ret = rdev->ops->set_cqm_rssi_steps(&rdev->wiphy, dev, steps);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
static inline void
rdev_mgmt_frame_register(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, u16 frame_type, bool reg)
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index a3d0a91..dbc2450 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1327,6 +1327,24 @@ TRACE_EVENT(rdev_set_cqm_txe_config,
__entry->intvl)
);
+TRACE_EVENT(rdev_set_cqm_rssi_steps,
+ TP_PROTO(struct wiphy *wiphy,
+ struct net_device *netdev, u32 steps),
+ TP_ARGS(wiphy, netdev, steps),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ __field(u32, steps)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ __entry->steps = steps;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", steps: %u ",
+ WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->steps)
+);
+
TRACE_EVENT(rdev_disconnect,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
u16 reason_code),
@@ -2486,6 +2504,21 @@ TRACE_EVENT(cfg80211_cqm_rssi_notify,
NETDEV_PR_ARG, __entry->rssi_event)
);
+TRACE_EVENT(cfg80211_cqm_rounded_rssi_notify,
+ TP_PROTO(struct net_device *netdev, u32 signal_level),
+ TP_ARGS(netdev, signal_level),
+ TP_STRUCT__entry(
+ NETDEV_ENTRY
+ __field(u32 signal_level)
+ ),
+ TP_fast_assign(
+ NETDEV_ASSIGN;
+ __entry->signal_level = signal_level;
+ ),
+ TP_printk(NETDEV_PR_FMT ", signal_level: %d",
+ NETDEV_PR_ARG, __entry->signal_level)
+);
+
TRACE_EVENT(cfg80211_reg_can_beacon,
TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef,
enum nl80211_iftype iftype, bool check_no_ir),
--
2.7.4
^ permalink raw reply related
* [PATCH v4] mwifiex: parse device tree node for PCIe
From: Rajat Jain @ 2016-10-21 0:30 UTC (permalink / raw)
To: linux-wireless, devicetree, Xinming Hu, Amitkumar Karwar,
Brian Norris, Kalle Valo, Rob Herring
Cc: rajatxjain, Rajat Jain
In-Reply-To: <20161005194827.GA14626@localhost>
From: Xinming Hu <huxm@marvell.com>
This patch derives device tree node from pcie bus layer framework.
Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
marvell-8xxx.txt) to accomodate PCIe changes.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Rajat Jain <rajatja@google.com>
---
Since I need this patch and haven't seen updates, I thought I'll take a stab.
v2: Included vendor and product IDs in compatible strings for PCIe
chipsets(Rob Herring)
v3: Patch is created using -M option so that it will only include diff of
original and renamed files(Rob Herring)
Resend v3: Resending the patch because I missed to include device tree mailing
while sending v3.
v4: Fix error handling, also move-on even if no device tree node is present.
.../{marvell-sd8xxx.txt => marvell-8xxx.txt} | 8 +++--
drivers/net/wireless/marvell/mwifiex/pcie.c | 39 +++++++++++++++++++---
drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 3 +-
3 files changed, 42 insertions(+), 8 deletions(-)
rename Documentation/devicetree/bindings/net/wireless/{marvell-sd8xxx.txt => marvell-8xxx.txt} (91%)
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
similarity index 91%
rename from Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
rename to Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index c421aba..dfe5f8e 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -1,8 +1,8 @@
-Marvell 8897/8997 (sd8897/sd8997) SDIO devices
+Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
------
-This node provides properties for controlling the marvell sdio wireless device.
-The node is expected to be specified as a child node to the SDIO controller that
+This node provides properties for controlling the marvell sdio/pcie wireless device.
+The node is expected to be specified as a child node to the SDIO/PCIE controller that
connects the device to the system.
Required properties:
@@ -10,6 +10,8 @@ Required properties:
- compatible : should be one of the following:
* "marvell,sd8897"
* "marvell,sd8997"
+ * "pci11ab,2b42"
+ * "pci1b4b,2b42"
Optional properties:
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 3c3c4f1..b3e6f06 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -37,6 +37,22 @@ static struct mwifiex_if_ops pcie_ops;
static struct semaphore add_remove_card_sem;
+static const struct of_device_id mwifiex_pcie_of_match_table[] = {
+ { .compatible = "pci11ab,2b42" },
+ { .compatible = "pci1b4b,2b42" },
+ { }
+};
+
+static int mwifiex_pcie_probe_of(struct device *dev)
+{
+ if (!of_match_node(mwifiex_pcie_of_match_table, dev->of_node)) {
+ pr_err("pcie device node not available");
+ return -1;
+ }
+
+ return 0;
+}
+
static int
mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
size_t size, int flags)
@@ -178,6 +194,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct pcie_service_card *card;
+ int ret;
pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
pdev->vendor, pdev->device, pdev->revision);
@@ -199,13 +216,27 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
card->pcie.can_ext_scan = data->can_ext_scan;
}
- if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
- MWIFIEX_PCIE)) {
- pr_err("%s failed\n", __func__);
- return -1;
+ /* device tree node parsing and platform specific configuration*/
+ if (pdev->dev.of_node) {
+ ret = mwifiex_pcie_probe_of(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "required compatible string missing\n");
+ goto err_free;
+ }
}
+ ret = mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
+ MWIFIEX_PCIE);
+ if (ret) {
+ pr_err("%s failed\n", __func__);
+ goto err_free;
+ }
return 0;
+
+err_free:
+ kfree(card);
+ return ret;
}
/*
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index 2a162c3..c8dccf5 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -2218,7 +2218,8 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
* The cal-data can be read from device tree and/or
* a configuration file and downloaded to firmware.
*/
- if (priv->adapter->iface_type == MWIFIEX_SDIO &&
+ if ((priv->adapter->iface_type == MWIFIEX_SDIO ||
+ priv->adapter->iface_type == MWIFIEX_PCIE) &&
adapter->dev->of_node) {
adapter->dt_node = adapter->dev->of_node;
if (of_property_read_u32(adapter->dt_node,
--
2.8.0.rc3.226.g39d4020
^ permalink raw reply related
* [PATCH] cfg80211: add generic helper to check interface is running
From: Arend van Spriel @ 2016-10-20 19:08 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
Adding a helper using wdev to check if interface is running. This
deals with both non-netdev and netdev interfaces. In struct
wireless_dev replacing 'p2p_started' and 'nan_started' by
'is_running' as those are mutual exclusive anyway.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
include/net/cfg80211.h | 13 +++++++++---
net/wireless/core.c | 8 ++++----
net/wireless/nl80211.c | 54 +++++++++++++++-----------------------------------
3 files changed, 30 insertions(+), 45 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2bbbcc3..0010e5a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3781,8 +3781,8 @@ static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops,
* @beacon_interval: beacon interval used on this device for transmitting
* beacons, 0 when not valid
* @address: The address for this device, valid only if @netdev is %NULL
- * @p2p_started: true if this is a P2P Device that has been started
- * @nan_started: true if this is a NAN interface that has been started
+ * @is_running: true if this is a non-netdev device that has been started, eg.
+ * like the P2P Device.
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
* @cac_time_ms: CAC time in ms
@@ -3814,7 +3814,7 @@ struct wireless_dev {
struct mutex mtx;
- bool use_4addr, p2p_started, nan_started;
+ bool use_4addr, is_running;
u8 address[ETH_ALEN] __aligned(sizeof(u16));
@@ -3871,6 +3871,13 @@ static inline u8 *wdev_address(struct wireless_dev *wdev)
return wdev->address;
}
+static inline bool wdev_is_running(struct wireless_dev *wdev)
+{
+ if (wdev->netdev)
+ return netif_running(wdev->netdev);
+ return wdev->is_running;
+}
+
/**
* wdev_priv - return wiphy priv from wireless_dev
*
diff --git a/net/wireless/core.c b/net/wireless/core.c
index f433f15..088ba44 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -210,11 +210,11 @@ void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
return;
- if (!wdev->p2p_started)
+ if (!wdev_is_running(wdev))
return;
rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
+ wdev->is_running = false;
rdev->opencount--;
@@ -233,11 +233,11 @@ void cfg80211_stop_nan(struct cfg80211_registered_device *rdev,
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_NAN))
return;
- if (!wdev->nan_started)
+ if (!wdev_is_running(wdev))
return;
rdev_stop_nan(rdev, wdev);
- wdev->nan_started = false;
+ wdev->is_running = false;
rdev->opencount--;
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fcf5b4f..e37801e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -10528,7 +10528,7 @@ static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
return -EOPNOTSUPP;
- if (wdev->p2p_started)
+ if (wdev_is_running(wdev))
return 0;
if (rfkill_blocked(rdev->rfkill))
@@ -10538,7 +10538,7 @@ static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
- wdev->p2p_started = true;
+ wdev->is_running = true;
rdev->opencount++;
return 0;
@@ -10570,7 +10570,7 @@ static int nl80211_start_nan(struct sk_buff *skb, struct genl_info *info)
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
- if (wdev->nan_started)
+ if (!wdev_is_running(wdev))
return -EEXIST;
if (rfkill_blocked(rdev->rfkill))
@@ -10593,7 +10593,7 @@ static int nl80211_start_nan(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
- wdev->nan_started = true;
+ wdev->is_running = true;
rdev->opencount++;
return 0;
@@ -10678,7 +10678,7 @@ static int nl80211_nan_add_func(struct sk_buff *skb,
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
- if (!wdev->nan_started)
+ if (!wdev_is_running(wdev))
return -ENOTCONN;
if (!info->attrs[NL80211_ATTR_NAN_FUNC])
@@ -10915,7 +10915,7 @@ static int nl80211_nan_del_func(struct sk_buff *skb,
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
- if (!wdev->nan_started)
+ if (!wdev_is_running(wdev))
return -ENOTCONN;
if (!info->attrs[NL80211_ATTR_COOKIE])
@@ -10943,7 +10943,7 @@ static int nl80211_nan_change_config(struct sk_buff *skb,
if (wdev->iftype != NL80211_IFTYPE_NAN)
return -EOPNOTSUPP;
- if (!wdev->nan_started)
+ if (!wdev_is_running(wdev))
return -ENOTCONN;
if (info->attrs[NL80211_ATTR_NAN_MASTER_PREF]) {
@@ -11255,11 +11255,7 @@ static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_RUNNING) {
- if (wdev->netdev &&
- !netif_running(wdev->netdev))
- return -ENETDOWN;
- if (!wdev->netdev && !wdev->p2p_started &&
- !wdev->nan_started)
+ if (!wdev_is_running(wdev))
return -ENETDOWN;
}
@@ -11422,10 +11418,7 @@ static int nl80211_vendor_cmd_dump(struct sk_buff *skb,
return -EINVAL;
if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_RUNNING) {
- if (wdev->netdev &&
- !netif_running(wdev->netdev))
- return -ENETDOWN;
- if (!wdev->netdev && !wdev->p2p_started)
+ if (!wdev_is_running(wdev))
return -ENETDOWN;
}
}
@@ -11796,29 +11789,14 @@ static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
info->user_ptr[1] = wdev;
}
- if (dev) {
- if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP &&
- !netif_running(dev)) {
- if (rtnl)
- rtnl_unlock();
- return -ENETDOWN;
- }
-
- dev_hold(dev);
- } else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
- if (wdev->iftype == NL80211_IFTYPE_P2P_DEVICE &&
- !wdev->p2p_started) {
- if (rtnl)
- rtnl_unlock();
- return -ENETDOWN;
- }
- if (wdev->iftype == NL80211_IFTYPE_NAN &&
- !wdev->nan_started) {
- if (rtnl)
- rtnl_unlock();
- return -ENETDOWN;
- }
+ if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP &&
+ !wdev_is_running(wdev)) {
+ if (rtnl)
+ rtnl_unlock();
+ return -ENETDOWN;
}
+ if (dev)
+ dev_hold(dev);
info->user_ptr[0] = rdev;
}
--
1.9.1
^ permalink raw reply related
* Re: cfg80211: race problem between suspend and disconnect event
From: Johannes Berg @ 2016-10-20 18:45 UTC (permalink / raw)
To: Amitkumar Karwar
Cc: Kalle Valo, Brian Norris, Nishant Sarmukadam, Cathy Luo,
linux-wireless@vger.kernel.org, Ganapathi Bhat
In-Reply-To: <67400d1c5c2141b3af75bdce9ec43840@SC-EXCH04.marvell.com>
Hi,
> Mwifiex driver rejects del_key() requests from cfg80211 during
> suspend. They came very late when driver's cfg80211_suspend handler
> is already executed and driver is in the middle of SDIO's suspend
> handler.
Interesting. Rejecting those calls is probably perfectly reasonable,
and in fact it's not clear to me why we even try to delete the keys
after we've disconnected - any driver implementation should have
removed them already anyway? You probably don't actually care about the
key removal either?
That said though, there's also the critical protocol stop and the
set_qos_map(NULL) call, which removes the QoS mapping. It doesn't look
like you support this right now in your driver, but in any case it'd be
pretty strange to have that happen after or during suspend.
> Please let us know if you have any suggestions to resolves this with
> cfg80211/driver change.
For cfg80211 we could do something like this:
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -104,13 +104,16 @@ static int wiphy_suspend(struct device *dev)
rtnl_lock();
if (rdev->wiphy.registered) {
- if (!rdev->wiphy.wowlan_config)
+ if (!rdev->wiphy.wowlan_config) {
cfg80211_leave_all(rdev);
+ cfg80211_process_rdev_events(rdev);
+ }
if (rdev->ops->suspend)
ret = rdev_suspend(rdev, rdev->wiphy.wowlan_config);
if (ret == 1) {
/* Driver refuse to configure wowlan */
cfg80211_leave_all(rdev);
+ cfg80211_process_rdev_events(rdev);
ret = rdev_suspend(rdev, NULL);
}
}
However, that assumes that you actually cfg80211_disconnected()
synchronously while being asked to disconnect, which doesn't seem to be
true from looking at mwifiex, if HostCmd_CMD_802_11_DEAUTHENTICATE
command can be sent to the firmware then you wait for EVENT_LINK_LOST,
EVENT_DEAUTHENTICATED or EVENT_DISASSOCIATED to come back from the
firmware, so this cfg80211 change won't help.
So somehow you'd have to synchronize with the firmware as well, to
process all those things before suspend, I guess?
We could then export cfg80211_process_rdev_events() as
cfg80211_process_wiphy_events() or so, so that you can call that at an
appropriate place from your suspend handler, after having synchronized
with the firmware?
johannes
^ permalink raw reply
* Re: [PATCH net-next v2 3/9] net: use core MTU range checking in wireless drivers
From: David Miller @ 2016-10-20 18:38 UTC (permalink / raw)
To: johannes
Cc: jarod, linux-kernel, netdev, linux-wireless, qca_merez, simon,
stas.yakovlev, inaky.perez-gonzalez
In-Reply-To: <1476987755.14078.3.camel@sipsolutions.net>
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 20 Oct 2016 20:22:35 +0200
> On Thu, 2016-10-20 at 13:55 -0400, Jarod Wilson wrote:
>> - set max_mtu in wil6210 driver
>> - set max_mtu in atmel driver
>> - set min/max_mtu in cisco airo driver, remove airo_change_mtu
>> - set min/max_mtu in ipw2100/ipw2200 drivers, remove
>> libipw_change_mtu
>> - set min/max_mtu in p80211netdev, remove wlan_change_mtu
>> - set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu
>
> For the mac80211 part,
>
> Acked-by: Johannes Berg <johannes@sipsolutions.net>
>
> Dave, I'm assuming you'll pick this up, but if you prefer not to I can
> also coordinate with Kalle to take this through our trees.
Yeah I'll get this, thanks for asking.
^ permalink raw reply
* Re: [PATCH net-next v2 3/9] net: use core MTU range checking in wireless drivers
From: Johannes Berg @ 2016-10-20 18:22 UTC (permalink / raw)
To: Jarod Wilson, linux-kernel
Cc: netdev, linux-wireless, Maya Erez, Simon Kelley,
Stanislav Yakovlev, Inaky Perez-Gonzalez
In-Reply-To: <20161020175524.6184-4-jarod@redhat.com>
On Thu, 2016-10-20 at 13:55 -0400, Jarod Wilson wrote:
> - set max_mtu in wil6210 driver
> - set max_mtu in atmel driver
> - set min/max_mtu in cisco airo driver, remove airo_change_mtu
> - set min/max_mtu in ipw2100/ipw2200 drivers, remove
> libipw_change_mtu
> - set min/max_mtu in p80211netdev, remove wlan_change_mtu
> - set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu
For the mac80211 part,
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Dave, I'm assuming you'll pick this up, but if you prefer not to I can
also coordinate with Kalle to take this through our trees.
johannes
^ permalink raw reply
* [PATCH net-next v2 3/9] net: use core MTU range checking in wireless drivers
From: Jarod Wilson @ 2016-10-20 17:55 UTC (permalink / raw)
To: linux-kernel
Cc: Jarod Wilson, netdev, linux-wireless, Maya Erez, Simon Kelley,
Stanislav Yakovlev, Johannes Berg, Inaky Perez-Gonzalez
In-Reply-To: <20161020175524.6184-1-jarod@redhat.com>
- set max_mtu in wil6210 driver
- set max_mtu in atmel driver
- set min/max_mtu in cisco airo driver, remove airo_change_mtu
- set min/max_mtu in ipw2100/ipw2200 drivers, remove libipw_change_mtu
- set min/max_mtu in p80211netdev, remove wlan_change_mtu
- set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu
- set min/max_mtu in wimax/i2400m and remove i2400m_change_mtu
- set min/max_mtu in intersil/hostap and remove prism2_change_mtu
- set min/max_mtu in intersil/orinoco
- set min/max_mtu in tty/n_gsm and remove gsm_change_mtu
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Maya Erez <qca_merez@qca.qualcomm.com>
CC: Simon Kelley <simon@thekelleys.org.uk>
CC: Stanislav Yakovlev <stas.yakovlev@gmail.com>
CC: Johannes Berg <johannes@sipsolutions.net>
CC: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/net/wimax/i2400m/netdev.c | 22 ++--------------------
drivers/net/wireless/ath/wil6210/netdev.c | 17 +----------------
drivers/net/wireless/atmel/atmel.c | 13 ++++---------
drivers/net/wireless/cisco/airo.c | 14 +++-----------
drivers/net/wireless/intel/ipw2x00/ipw2100.c | 3 ++-
drivers/net/wireless/intel/ipw2x00/ipw2200.c | 8 ++++++--
drivers/net/wireless/intel/ipw2x00/libipw.h | 1 -
drivers/net/wireless/intel/ipw2x00/libipw_module.c | 9 ---------
drivers/net/wireless/intersil/hostap/hostap_main.c | 15 ++-------------
drivers/net/wireless/intersil/orinoco/main.c | 6 +++---
drivers/staging/wlan-ng/p80211netdev.c | 18 +++++-------------
drivers/tty/n_gsm.c | 12 ++----------
net/mac80211/iface.c | 15 ++++-----------
13 files changed, 34 insertions(+), 119 deletions(-)
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index bb74f4b..7f64e74 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -395,25 +395,6 @@ netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
static
-int i2400m_change_mtu(struct net_device *net_dev, int new_mtu)
-{
- int result;
- struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
- struct device *dev = i2400m_dev(i2400m);
-
- if (new_mtu >= I2400M_MAX_MTU) {
- dev_err(dev, "Cannot change MTU to %d (max is %d)\n",
- new_mtu, I2400M_MAX_MTU);
- result = -EINVAL;
- } else {
- net_dev->mtu = new_mtu;
- result = 0;
- }
- return result;
-}
-
-
-static
void i2400m_tx_timeout(struct net_device *net_dev)
{
/*
@@ -590,7 +571,6 @@ static const struct net_device_ops i2400m_netdev_ops = {
.ndo_stop = i2400m_stop,
.ndo_start_xmit = i2400m_hard_start_xmit,
.ndo_tx_timeout = i2400m_tx_timeout,
- .ndo_change_mtu = i2400m_change_mtu,
};
static void i2400m_get_drvinfo(struct net_device *net_dev,
@@ -621,6 +601,8 @@ void i2400m_netdev_setup(struct net_device *net_dev)
d_fnstart(3, NULL, "(net_dev %p)\n", net_dev);
ether_setup(net_dev);
net_dev->mtu = I2400M_MAX_MTU;
+ net_dev->min_mtu = 0;
+ net_dev->max_mtu = I2400M_MAX_MTU;
net_dev->tx_queue_len = I2400M_TX_QLEN;
net_dev->features =
NETIF_F_VLAN_CHALLENGED
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 61de5e9..d18372c 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -41,21 +41,6 @@ static int wil_stop(struct net_device *ndev)
return wil_down(wil);
}
-static int wil_change_mtu(struct net_device *ndev, int new_mtu)
-{
- struct wil6210_priv *wil = ndev_to_wil(ndev);
-
- if (new_mtu < 68 || new_mtu > mtu_max) {
- wil_err(wil, "invalid MTU %d\n", new_mtu);
- return -EINVAL;
- }
-
- wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu);
- ndev->mtu = new_mtu;
-
- return 0;
-}
-
static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
@@ -69,7 +54,6 @@ static const struct net_device_ops wil_netdev_ops = {
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = wil_change_mtu,
.ndo_do_ioctl = wil_do_ioctl,
};
@@ -126,6 +110,7 @@ static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
static void wil_dev_setup(struct net_device *dev)
{
ether_setup(dev);
+ dev->max_mtu = mtu_max;
dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
}
diff --git a/drivers/net/wireless/atmel/atmel.c b/drivers/net/wireless/atmel/atmel.c
index bf2e9a0..eb92d5a 100644
--- a/drivers/net/wireless/atmel/atmel.c
+++ b/drivers/net/wireless/atmel/atmel.c
@@ -1295,14 +1295,6 @@ static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev)
return &priv->wstats;
}
-static int atmel_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > 2312))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
static int atmel_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
@@ -1506,7 +1498,6 @@ static const struct file_operations atmel_proc_fops = {
static const struct net_device_ops atmel_netdev_ops = {
.ndo_open = atmel_open,
.ndo_stop = atmel_close,
- .ndo_change_mtu = atmel_change_mtu,
.ndo_set_mac_address = atmel_set_mac_address,
.ndo_start_xmit = start_tx,
.ndo_do_ioctl = atmel_ioctl,
@@ -1600,6 +1591,10 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port,
dev->irq = irq;
dev->base_addr = port;
+ /* MTU range: 68 - 2312 */
+ dev->min_mtu = 68;
+ dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
+
SET_NETDEV_DEV(dev, sys_dev);
if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 69b826d..4b04045 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -2329,14 +2329,6 @@ static int airo_set_mac_address(struct net_device *dev, void *p)
return 0;
}
-static int airo_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > 2400))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
static LIST_HEAD(airo_devices);
static void add_airo_dev(struct airo_info *ai)
@@ -2656,7 +2648,6 @@ static const struct net_device_ops airo11_netdev_ops = {
.ndo_get_stats = airo_get_stats,
.ndo_set_mac_address = airo_set_mac_address,
.ndo_do_ioctl = airo_ioctl,
- .ndo_change_mtu = airo_change_mtu,
};
static void wifi_setup(struct net_device *dev)
@@ -2668,6 +2659,8 @@ static void wifi_setup(struct net_device *dev)
dev->type = ARPHRD_IEEE80211;
dev->hard_header_len = ETH_HLEN;
dev->mtu = AIRO_DEF_MTU;
+ dev->min_mtu = 68;
+ dev->max_mtu = MIC_MSGLEN_MAX;
dev->addr_len = ETH_ALEN;
dev->tx_queue_len = 100;
@@ -2754,7 +2747,6 @@ static const struct net_device_ops airo_netdev_ops = {
.ndo_set_rx_mode = airo_set_multicast_list,
.ndo_set_mac_address = airo_set_mac_address,
.ndo_do_ioctl = airo_ioctl,
- .ndo_change_mtu = airo_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
@@ -2766,7 +2758,6 @@ static const struct net_device_ops mpi_netdev_ops = {
.ndo_set_rx_mode = airo_set_multicast_list,
.ndo_set_mac_address = airo_set_mac_address,
.ndo_do_ioctl = airo_ioctl,
- .ndo_change_mtu = airo_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
@@ -2822,6 +2813,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
dev->irq = irq;
dev->base_addr = port;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->max_mtu = MIC_MSGLEN_MAX;
SET_NETDEV_DEV(dev, dmdev);
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
index bfa542c..6417609 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
@@ -6035,7 +6035,6 @@ static const struct net_device_ops ipw2100_netdev_ops = {
.ndo_open = ipw2100_open,
.ndo_stop = ipw2100_close,
.ndo_start_xmit = libipw_xmit,
- .ndo_change_mtu = libipw_change_mtu,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
.ndo_validate_addr = eth_validate_addr,
@@ -6071,6 +6070,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
dev->wireless_data = &priv->wireless_data;
dev->watchdog_timeo = 3 * HZ;
dev->irq = 0;
+ dev->min_mtu = 68;
+ dev->max_mtu = LIBIPW_DATA_LEN;
/* NOTE: We don't use the wireless_handlers hook
* in dev as the system will start throwing WX requests
diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
index bfd6861..ef9af8a 100644
--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
@@ -11561,7 +11561,6 @@ static const struct net_device_ops ipw_prom_netdev_ops = {
.ndo_open = ipw_prom_open,
.ndo_stop = ipw_prom_stop,
.ndo_start_xmit = ipw_prom_hard_start_xmit,
- .ndo_change_mtu = libipw_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@@ -11587,6 +11586,9 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
priv->prom_net_dev->netdev_ops = &ipw_prom_netdev_ops;
+ priv->prom_net_dev->min_mtu = 68;
+ priv->prom_net_dev->max_mtu = LIBIPW_DATA_LEN;
+
priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
@@ -11619,7 +11621,6 @@ static const struct net_device_ops ipw_netdev_ops = {
.ndo_set_rx_mode = ipw_net_set_multicast_list,
.ndo_set_mac_address = ipw_net_set_mac_address,
.ndo_start_xmit = libipw_xmit,
- .ndo_change_mtu = libipw_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
@@ -11729,6 +11730,9 @@ static int ipw_pci_probe(struct pci_dev *pdev,
net_dev->wireless_handlers = &ipw_wx_handler_def;
net_dev->ethtool_ops = &ipw_ethtool_ops;
+ net_dev->min_mtu = 68;
+ net_dev->max_mtu = LIBIPW_DATA_LEN;
+
err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
if (err) {
IPW_ERROR("failed to create sysfs device attributes\n");
diff --git a/drivers/net/wireless/intel/ipw2x00/libipw.h b/drivers/net/wireless/intel/ipw2x00/libipw.h
index b057161..b513551 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw.h
+++ b/drivers/net/wireless/intel/ipw2x00/libipw.h
@@ -948,7 +948,6 @@ static inline int libipw_is_cck_rate(u8 rate)
/* libipw.c */
void free_libipw(struct net_device *dev, int monitor);
struct net_device *alloc_libipw(int sizeof_priv, int monitor);
-int libipw_change_mtu(struct net_device *dev, int new_mtu);
void libipw_networks_age(struct libipw_device *ieee, unsigned long age_secs);
diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_module.c b/drivers/net/wireless/intel/ipw2x00/libipw_module.c
index 60f2874..2332075 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/intel/ipw2x00/libipw_module.c
@@ -118,15 +118,6 @@ static void libipw_networks_initialize(struct libipw_device *ieee)
&ieee->network_free_list);
}
-int libipw_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-EXPORT_SYMBOL(libipw_change_mtu);
-
struct net_device *alloc_libipw(int sizeof_priv, int monitor)
{
struct libipw_device *ieee;
diff --git a/drivers/net/wireless/intersil/hostap/hostap_main.c b/drivers/net/wireless/intersil/hostap/hostap_main.c
index 80d4228..1a16b8c 100644
--- a/drivers/net/wireless/intersil/hostap/hostap_main.c
+++ b/drivers/net/wireless/intersil/hostap/hostap_main.c
@@ -765,16 +765,6 @@ static void hostap_set_multicast_list(struct net_device *dev)
}
-static int prism2_change_mtu(struct net_device *dev, int new_mtu)
-{
- if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU)
- return -EINVAL;
-
- dev->mtu = new_mtu;
- return 0;
-}
-
-
static void prism2_tx_timeout(struct net_device *dev)
{
struct hostap_interface *iface;
@@ -813,7 +803,6 @@ static const struct net_device_ops hostap_netdev_ops = {
.ndo_do_ioctl = hostap_ioctl,
.ndo_set_mac_address = prism2_set_mac_address,
.ndo_set_rx_mode = hostap_set_multicast_list,
- .ndo_change_mtu = prism2_change_mtu,
.ndo_tx_timeout = prism2_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
};
@@ -826,7 +815,6 @@ static const struct net_device_ops hostap_mgmt_netdev_ops = {
.ndo_do_ioctl = hostap_ioctl,
.ndo_set_mac_address = prism2_set_mac_address,
.ndo_set_rx_mode = hostap_set_multicast_list,
- .ndo_change_mtu = prism2_change_mtu,
.ndo_tx_timeout = prism2_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
};
@@ -839,7 +827,6 @@ static const struct net_device_ops hostap_master_ops = {
.ndo_do_ioctl = hostap_ioctl,
.ndo_set_mac_address = prism2_set_mac_address,
.ndo_set_rx_mode = hostap_set_multicast_list,
- .ndo_change_mtu = prism2_change_mtu,
.ndo_tx_timeout = prism2_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
};
@@ -851,6 +838,8 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local,
iface = netdev_priv(dev);
ether_setup(dev);
+ dev->min_mtu = PRISM2_MIN_MTU;
+ dev->max_mtu = PRISM2_MAX_MTU;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
/* kernel callbacks */
diff --git a/drivers/net/wireless/intersil/orinoco/main.c b/drivers/net/wireless/intersil/orinoco/main.c
index 7afe200..9d96b7c 100644
--- a/drivers/net/wireless/intersil/orinoco/main.c
+++ b/drivers/net/wireless/intersil/orinoco/main.c
@@ -322,9 +322,6 @@ int orinoco_change_mtu(struct net_device *dev, int new_mtu)
{
struct orinoco_private *priv = ndev_priv(dev);
- if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
- return -EINVAL;
-
/* MTU + encapsulation + header length */
if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
(priv->nicbuf_size - ETH_HLEN))
@@ -2288,6 +2285,9 @@ int orinoco_if_add(struct orinoco_private *priv,
dev->base_addr = base_addr;
dev->irq = irq;
+ dev->min_mtu = ORINOCO_MIN_MTU;
+ dev->max_mtu = ORINOCO_MAX_MTU;
+
SET_NETDEV_DEV(dev, priv->dev);
ret = register_netdev(dev);
if (ret)
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index 825a63a..4762d38 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -669,18 +669,6 @@ static int p80211knetdev_set_mac_address(struct net_device *dev, void *addr)
return result;
}
-static int wlan_change_mtu(struct net_device *dev, int new_mtu)
-{
- /* 2312 is max 802.11 payload, 20 is overhead, (ether + llc +snap)
- and another 8 for wep. */
- if ((new_mtu < 68) || (new_mtu > (2312 - 20 - 8)))
- return -EINVAL;
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-
static const struct net_device_ops p80211_netdev_ops = {
.ndo_init = p80211knetdev_init,
.ndo_open = p80211knetdev_open,
@@ -690,7 +678,6 @@ static const struct net_device_ops p80211_netdev_ops = {
.ndo_do_ioctl = p80211knetdev_do_ioctl,
.ndo_set_mac_address = p80211knetdev_set_mac_address,
.ndo_tx_timeout = p80211knetdev_tx_timeout,
- .ndo_change_mtu = wlan_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
@@ -756,6 +743,11 @@ int wlan_setup(struct wlandevice *wlandev, struct device *physdev)
wdev->wiphy = wiphy;
wdev->iftype = NL80211_IFTYPE_STATION;
netdev->ieee80211_ptr = wdev;
+ netdev->min_mtu = 68;
+ /* 2312 is max 802.11 payload, 20 is overhead,
+ * (ether + llc + snap) and another 8 for wep.
+ */
+ netdev->max_mtu = (2312 - 20 - 8);
netif_stop_queue(netdev);
netif_carrier_off(netdev);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 54cab59..f3932ba 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2711,15 +2711,6 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
return;
}
-static int gsm_change_mtu(struct net_device *net, int new_mtu)
-{
- struct gsm_mux_net *mux_net = netdev_priv(net);
- if ((new_mtu < 8) || (new_mtu > mux_net->dlci->gsm->mtu))
- return -EINVAL;
- net->mtu = new_mtu;
- return 0;
-}
-
static void gsm_mux_net_init(struct net_device *net)
{
static const struct net_device_ops gsm_netdev_ops = {
@@ -2728,7 +2719,6 @@ static void gsm_mux_net_init(struct net_device *net)
.ndo_start_xmit = gsm_mux_net_start_xmit,
.ndo_tx_timeout = gsm_mux_net_tx_timeout,
.ndo_get_stats = gsm_mux_net_get_stats,
- .ndo_change_mtu = gsm_change_mtu,
};
net->netdev_ops = &gsm_netdev_ops;
@@ -2787,6 +2777,8 @@ static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc)
return -ENOMEM;
}
net->mtu = dlci->gsm->mtu;
+ net->min_mtu = 8;
+ net->max_mtu = dlci->gsm->mtu;
mux_net = netdev_priv(net);
mux_net->dlci = dlci;
kref_init(&mux_net->ref);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 638ec07..73e6a8f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -150,15 +150,6 @@ void ieee80211_recalc_idle(struct ieee80211_local *local)
ieee80211_hw_config(local, change);
}
-static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
-{
- if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
- return -EINVAL;
-
- dev->mtu = new_mtu;
- return 0;
-}
-
static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr,
bool check_dup)
{
@@ -1166,7 +1157,6 @@ static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_uninit = ieee80211_uninit,
.ndo_start_xmit = ieee80211_subif_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
- .ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_netdev_select_queue,
.ndo_get_stats64 = ieee80211_get_stats64,
@@ -1200,7 +1190,6 @@ static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_uninit = ieee80211_uninit,
.ndo_start_xmit = ieee80211_monitor_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
- .ndo_change_mtu = ieee80211_change_mtu,
.ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_monitor_select_queue,
.ndo_get_stats64 = ieee80211_get_stats64,
@@ -1884,6 +1873,10 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
+ /* MTU range: 256 - 2304 */
+ ndev->min_mtu = 256;
+ ndev->max_mtu = IEEE80211_MAX_DATA_LEN;
+
ret = register_netdevice(ndev);
if (ret) {
ieee80211_if_free(ndev);
--
2.10.0
^ permalink raw reply related
* cfg80211: race problem between suspend and disconnect event
From: Amitkumar Karwar @ 2016-10-20 16:47 UTC (permalink / raw)
To: Johannes Berg
Cc: Kalle Valo, Brian Norris, Nishant Sarmukadam, Cathy Luo,
linux-wireless@vger.kernel.org, Ganapathi Bhat
Hi Johannes,
We came across one race issue while running suspend tests with Marvell device.
Mwifiex driver rejects del_key() requests from cfg80211 during suspend. They came very late when driver's cfg80211_suspend handler is already executed and driver is in the middle of SDIO's suspend handler.
In wowlan not configured case, below code ensures cfg80211 terminates connection before calling ops->suspend. However when driver reports disconnection through cfg80211_disconnected() API, cfg80211 handles EVENT_DISCONNECTED in separate work function where ops->del_key() is called in loop to flush keys.
------wiphy_suspend()-----------
if (rdev->wiphy.registered) {
if (!rdev->wiphy.wowlan_config)
cfg80211_leave_all(rdev);
if (rdev->ops->suspend)
ret = rdev_suspend(rdev, rdev->wiphy.wowlan_config);
--------------------------------
Please let us know if you have any suggestions to resolves this with cfg80211/driver change.
Regards,
Amitkumar
^ permalink raw reply
* Re: [PATCH 10/10] iwlwifi: mvm: use dev_coredumpsg()
From: Johannes Berg @ 2016-10-20 13:31 UTC (permalink / raw)
To: Luca Coelho, linux-wireless; +Cc: kvalo, Aviya Erenfeld, Luca Coelho
In-Reply-To: <20161019100755.23874-11-luca@coelho.fi>
> - dev_coredumpm(mvm->trans->dev, THIS_MODULE, fw_error_dump,
> 0,
> - GFP_KERNEL, iwl_mvm_read_coredump,
> iwl_mvm_free_coredump);
> + sg_dump_data = alloc_sgtable(file_len);
> + if (sg_dump_data) {
> + sg_pcopy_from_buffer(sg_dump_data,
> + sg_nents(sg_dump_data),
> + fw_error_dump->op_mode_ptr,
> + fw_error_dump->op_mode_len, 0);
> + sg_pcopy_from_buffer(sg_dump_data,
> + sg_nents(sg_dump_data),
> + fw_error_dump->trans_ptr->data,
> + fw_error_dump->trans_ptr->len,
> + fw_error_dump->op_mode_len);
>
smatch pointed out that we check fw_error_dump->trans_ptr for NULL
earlier, and that is indeed correct afaict; I've sent you a fix
internally :)
johannes
^ permalink raw reply
* [PATCH v5 4/4] mwifiex: fix race for card->adapter
From: Amitkumar Karwar @ 2016-10-20 13:26 UTC (permalink / raw)
To: linux-wireless
Cc: Cathy Luo, Nishant Sarmukadam, briannorris, dmitry.torokhov,
Xinming Hu, Amitkumar Karwar
In-Reply-To: <1476969979-28554-1-git-send-email-akarwar@marvell.com>
From: Xinming Hu <huxm@marvell.com>
card->adapter is set/reset in register/unregister calls. Firmware gets
downloaded asynchronously in a separate thread during init. We have a
unregister call when firmware initialization fails. It may have a race
with suspend thread where "card->adapter" is being read.
This patch adds spinlock to fix the problem.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
New patch introduced in v5 to address race between driver init and suspend
threads.
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 38 +++++++++++++++++++++++------
drivers/net/wireless/marvell/mwifiex/pcie.h | 2 ++
2 files changed, 32 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 94f75be..9147e6a 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -102,23 +102,32 @@ static int mwifiex_pcie_suspend(struct device *dev)
struct mwifiex_adapter *adapter;
struct pcie_service_card *card;
struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned long flags;
card = pci_get_drvdata(pdev);
- if (!card || !card->adapter ||
- card->adapter->hw_status == MWIFIEX_HW_STATUS_RESET ||
- card->adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) {
- pr_err("Card or adapter structure is not valid or hw_status shows failure\n");
+ if (!card) {
+ pr_err("Card is not valid\n");
return 0;
}
+ spin_lock_irqsave(&card->adapter_lock, flags);
adapter = card->adapter;
+ if (!adapter ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_RESET ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) {
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
+ pr_err("Adapter structure is not valid or hw_status shows failure\n");
+ return 0;
+ }
if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING ||
adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE ||
adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) {
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
pr_err("We are in the middle of initialzaion or closing\n");
return -EBUSY;
}
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
/* Enable the Host Sleep */
if (!mwifiex_enable_hs(adapter)) {
@@ -150,16 +159,22 @@ static int mwifiex_pcie_resume(struct device *dev)
struct mwifiex_adapter *adapter;
struct pcie_service_card *card;
struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned long flags;
card = pci_get_drvdata(pdev);
-
- if (!card || !card->adapter ||
- card->adapter->hw_status != MWIFIEX_HW_STATUS_READY) {
- pr_err("Card or adapter structure is not valid or hw_status is not ready\n");
+ if (!card) {
+ pr_err("Card is not valid\n");
return 0;
}
+ spin_lock_irqsave(&card->adapter_lock, flags);
adapter = card->adapter;
+ if (!adapter || adapter->hw_status != MWIFIEX_HW_STATUS_READY) {
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
+ pr_err("adapter structure is not valid or hw_status is not ready\n");
+ return 0;
+ }
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
if (!adapter->is_suspended) {
mwifiex_dbg(adapter, WARN,
@@ -195,6 +210,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
return -ENOMEM;
card->dev = pdev;
+ spin_lock_init(&card->adapter_lock);
if (ent->driver_data) {
struct mwifiex_pcie_device *data = (void *)ent->driver_data;
@@ -2973,9 +2989,12 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;
struct pci_dev *pdev = card->dev;
+ unsigned long flags;
+ spin_lock_irqsave(&card->adapter_lock, flags);
/* save adapter pointer in card */
card->adapter = adapter;
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
adapter->dev = &pdev->dev;
if (mwifiex_pcie_request_irq(adapter))
@@ -3001,6 +3020,7 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
struct pcie_service_card *card = adapter->card;
struct pci_dev *pdev;
int i;
+ unsigned long flags;
if (card) {
pdev = card->dev;
@@ -3022,7 +3042,9 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
if (card->msi_enable)
pci_disable_msi(pdev);
}
+ spin_lock_irqsave(&card->adapter_lock, flags);
card->adapter = NULL;
+ spin_unlock_irqrestore(&card->adapter_lock, flags);
}
}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index 46f99ca..f6e20ea 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -344,6 +344,8 @@ struct mwifiex_msix_context {
struct pcie_service_card {
struct pci_dev *dev;
struct mwifiex_adapter *adapter;
+ /* spin lock for card->adapter */
+ spinlock_t adapter_lock;
struct mwifiex_pcie_device pcie;
u8 txbd_flush;
--
1.9.1
^ permalink raw reply related
* [PATCH v5 3/4] mwifiex: check hw_status in suspend and resume handlers
From: Amitkumar Karwar @ 2016-10-20 13:26 UTC (permalink / raw)
To: linux-wireless
Cc: Cathy Luo, Nishant Sarmukadam, briannorris, dmitry.torokhov,
Amitkumar Karwar
In-Reply-To: <1476969979-28554-1-git-send-email-akarwar@marvell.com>
We have observed a kernel crash when system immediately suspends
after booting. There is a race between suspend and driver initialization
paths. This patch adds hw_status checks in suspend/resume to fix this issue
and other corner cases.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
v2: Return failure in suspend/resume handler in this scenario.
v3: Handle "hw_status" not READY cases carefully. Return 0 if
init or shutdown is in progress. Return -EBUSY if firmware download
failed or command timeout ocurred(non-recoverable). (Brian Norris)
v4: In resume, we need not return failure.
v5: Same as v4
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index dd4006e..94f75be 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -104,13 +104,22 @@ static int mwifiex_pcie_suspend(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
+ if (!card || !card->adapter ||
+ card->adapter->hw_status == MWIFIEX_HW_STATUS_RESET ||
+ card->adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) {
+ pr_err("Card or adapter structure is not valid or hw_status shows failure\n");
return 0;
}
adapter = card->adapter;
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) {
+ pr_err("We are in the middle of initialzaion or closing\n");
+ return -EBUSY;
+ }
+
/* Enable the Host Sleep */
if (!mwifiex_enable_hs(adapter)) {
mwifiex_dbg(adapter, ERROR,
@@ -143,8 +152,10 @@ static int mwifiex_pcie_resume(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
+
+ if (!card || !card->adapter ||
+ card->adapter->hw_status != MWIFIEX_HW_STATUS_READY) {
+ pr_err("Card or adapter structure is not valid or hw_status is not ready\n");
return 0;
}
--
1.9.1
^ permalink raw reply related
* [PATCH v5 2/4] mwifiex: remove redundant pdev check in suspend/resume handlers
From: Amitkumar Karwar @ 2016-10-20 13:26 UTC (permalink / raw)
To: linux-wireless
Cc: Cathy Luo, Nishant Sarmukadam, briannorris, dmitry.torokhov,
Amitkumar Karwar
In-Reply-To: <1476969979-28554-1-git-send-email-akarwar@marvell.com>
to_pci_dev() would just do struct offset arithmetic on struct
device to get 'pdev' pointer. We never get NULL pdev pointer
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
New patch introduced in v3 as per inputs from Brian Norris.
v5: Same as v3, v4
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 302ffd1..dd4006e 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -103,14 +103,9 @@ static int mwifiex_pcie_suspend(struct device *dev)
struct pcie_service_card *card;
struct pci_dev *pdev = to_pci_dev(dev);
- if (pdev) {
- card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
- return 0;
- }
- } else {
- pr_err("PCIE device is not specified\n");
+ card = pci_get_drvdata(pdev);
+ if (!card || !card->adapter) {
+ pr_err("Card or adapter structure is not valid\n");
return 0;
}
@@ -147,14 +142,9 @@ static int mwifiex_pcie_resume(struct device *dev)
struct pcie_service_card *card;
struct pci_dev *pdev = to_pci_dev(dev);
- if (pdev) {
- card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
- return 0;
- }
- } else {
- pr_err("PCIE device is not specified\n");
+ card = pci_get_drvdata(pdev);
+ if (!card || !card->adapter) {
+ pr_err("Card or adapter structure is not valid\n");
return 0;
}
--
1.9.1
^ permalink raw reply related
* [PATCH v5 1/4] mwifiex: reset card->adapter during device unregister
From: Amitkumar Karwar @ 2016-10-20 13:26 UTC (permalink / raw)
To: linux-wireless
Cc: Cathy Luo, Nishant Sarmukadam, briannorris, dmitry.torokhov,
Xinming Hu, Amitkumar Karwar
From: Xinming Hu <huxm@marvell.com>
card->adapter gets initialized in mwifiex_register_dev(). As it's not
cleared in mwifiex_unregister_dev(), we may end up accessing the memory
which is already free in below scenario.
Scenario: Driver initialization is failed due to incorrect firmware or
some other reason. Meanwhile device reboot/unload occurs.
Please note that we have 'add_remove_card_sem' semaphore. So if there
is a race betweem init and remove threads, they will execute one after
another. This patch ensures that "card->adapter" is set to NULL when
all cleanup is performed in init failure thread. Later remove thread
can return immediately if "card->adapter" is NULL
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
---
v4: Same as v1, v2, v3
v5: Patch description is updated to get clear picture. There is no race
for init and remove threads as per design. This patch just adds missing
"card->adapter= NULL" change to avoid accessing already freed memory which
leads to a crash.
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 1 +
drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 063c707..302ffd1 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -3021,6 +3021,7 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
if (card->msi_enable)
pci_disable_msi(pdev);
}
+ card->adapter = NULL;
}
}
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index 8718950..4cad1c2 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -2066,6 +2066,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
struct sdio_mmc_card *card = adapter->card;
if (adapter->card) {
+ card->adapter = NULL;
sdio_claim_host(card->func);
sdio_disable_func(card->func);
sdio_release_host(card->func);
--
1.9.1
^ permalink raw reply related
* RE: [PATCH v4 1/3] mwifiex: reset card->adapter during device unregister
From: Amitkumar Karwar @ 2016-10-20 13:11 UTC (permalink / raw)
To: Brian Norris
Cc: linux-wireless@vger.kernel.org, Cathy Luo, Nishant Sarmukadam,
rajatja@google.com, Xinming Hu, abhishekbh@google.com,
Dmitry Torokhov
In-Reply-To: <20161011002238.GC19969@localhost>
Hi Brian/Dmitry,
> From: Brian Norris [mailto:briannorris@chromium.org]
> Sent: Tuesday, October 11, 2016 5:53 AM
> To: Amitkumar Karwar
> Cc: linux-wireless@vger.kernel.org; Cathy Luo; Nishant Sarmukadam;
> rajatja@google.com; Xinming Hu; abhishekbh@google.com; Dmitry Torokhov
> Subject: Re: [PATCH v4 1/3] mwifiex: reset card->adapter during device
> unregister
>
> + Dmitry
>
> Hi Amit,
>
> On Mon, Oct 10, 2016 at 01:53:32PM -0700, Brian Norris wrote:
> > On Thu, Oct 06, 2016 at 11:36:24PM +0530, Amitkumar Karwar wrote:
> > > From: Xinming Hu <huxm@marvell.com>
> > >
> > > card->adapter gets initialized during device registration.
> > > As it's not cleared, we may end up accessing invalid memory in some
> > > corner cases. This patch fixes the problem.
> > >
> > > Signed-off-by: Xinming Hu <huxm@marvell.com>
> > > Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
> > > ---
> > > v4: Same as v1, v2, v3
> > > ---
> > > drivers/net/wireless/marvell/mwifiex/pcie.c | 1 +
> > > drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
> > > 2 files changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c
> > > b/drivers/net/wireless/marvell/mwifiex/pcie.c
> > > index f1eeb73..ba9e068 100644
> > > --- a/drivers/net/wireless/marvell/mwifiex/pcie.c
> > > +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
> > > @@ -3042,6 +3042,7 @@ static void mwifiex_unregister_dev(struct
> mwifiex_adapter *adapter)
> > > pci_disable_msi(pdev);
> > > }
> > > }
> > > + card->adapter = NULL;
> > > }
> > >
> > > /* This function initializes the PCI-E host memory space, WCB
> rings, etc.
> > > diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c
> > > b/drivers/net/wireless/marvell/mwifiex/sdio.c
> > > index 8718950..4cad1c2 100644
> > > --- a/drivers/net/wireless/marvell/mwifiex/sdio.c
> > > +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
> > > @@ -2066,6 +2066,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter
> *adapter)
> > > struct sdio_mmc_card *card = adapter->card;
> > >
> > > if (adapter->card) {
> > > + card->adapter = NULL;
> > > sdio_claim_host(card->func);
> > > sdio_disable_func(card->func);
> > > sdio_release_host(card->func);
> >
> > As discussed on v1, I had qualms about the raciness between
> > reads/writes of card->adapter, but I believe we:
> > (a) can't have any command activity while writing the ->adapter field
> > (either we're just init'ing the device, or we've disabled interrupts
> > and are tearing it down) and
> > (b) can't have a race between suspend()/resume() and unregister_dev(),
> > since unregister_dev() is called from device remove() (which should
> > not be concurrent with suspend()).
> >
> > Also, I thought you had the same problem in usb.c, but in fact, you
> > fixed that ages ago here:
> >
> > 353d2a69ea26 mwifiex: fix issues in driver unload path for USB
> > chipsets
> >
> > Would be nice if fixes were bettery synchronized across the three
> > interface drivers you support. We seem to be discovering unnecessary
> > divergence on a few points recently.
> >
> > At any rate:
> >
> > Reviewed-by: Brian Norris <briannorris@chromium.org>
> > Tested-by: Brian Norris <briannorris@chromium.org>
>
> Dmitry helped me re-realize my original qualms:
>
> mwifiex_unregister_dev() is called in the failure path for your async FW
> request, and so it may race with suspend(). So I retract my Reviewed-by.
> Sorry.
Thanks for your comments.
Actually description for this patch was ambiguous and incorrect. Sorry for that. This patch doesn't fix any race. In fact, we don't have a race between init and remove threads due to semaphore usage as per design. This patch just adds missing "card->adapter=NULL" so that when teardown/remove thread starts after init failure, it won't try freeing already freed things.
I have updated patch description in v5 series.
You are right. We may have a race between init failure and suspend thread. I have prepared 4th patch in my v5 series to address this.
>
> I'm going to look into converting to asynchronous device probing, which
> might remove the need for async FW request, and would therefore resolve
> both patch 1 and 3's races without any additional complicated hacks. But
> I'm not sure if that will satisfy all mwifiex users well enough. I'll
> have to give it a little more thought. Any thoughts from your side,
> Amit?
>
This is not needed. 4th patch in V5 series would take care of this race.
I will be posting v5 series shortly.
Regards,
Amitkumar
^ permalink raw reply
* Realtek RTL8151FH-CG
From: Dmitry Kulikov @ 2016-10-20 12:35 UTC (permalink / raw)
To: Vittorio Gambaletta; +Cc: linux-wireless, ath9k-devel, ath9k-devel
[-- Attachment #1: Type: text/plain, Size: 974 bytes --]
Hello, Vittorio
Hope you are going well.
I've found that you've been involved in the developing modules for Atheros
wireless devices for the kernel.
Many thanks for your work.
I'd like to ask you if you can tell me about the situation with Atheros
Communications Inc. AR9565 Wireless Network Adapter. I have this card in my HP
ProBook 470 G1 Notebook.
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03963215
I use now kernel 4.4.24. The problem is with the led on the button that is
intended to switch it on/off.
After the boot it does not change white color when I switch the wireless off.
But if I move the computer to the sleep mode for a long period (short one does
no help) the lamp starts working normally
I've attached config file and lsmod in the case it will be helpful for
you.
Thank you in advance.
--
With best regards,
Dmitri Koulikoff
mailto:dima@koulikoff.ru
skype: dima.koulikoff
phone: +7 (925) 505-2185
[-- Attachment #2: .config --]
[-- Type: text/x-mpsub, Size: 159770 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.4.15 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="darkstar"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=m
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=m
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
# CONFIG_PARAVIRT is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=256
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=98304
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_ZPOOL=m
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=m
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
# CONFIG_KEXEC_VERIFY_SIG is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x40000000
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="\"\""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_ACPI_EXTLOG=m
CONFIG_PMIC_OPREGION=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
CONFIG_NF_TABLES_NETDEV=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_REDIR_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_HSR=m
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_LEDS is not set
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCMCIA=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_M_CAN=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_DEBUGFS is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=m
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=m
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
CONFIG_NFC_WILINK=m
# CONFIG_NFC_MEI_PHY is not set
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_FDP is not set
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
# CONFIG_NFC_MRVL_I2C is not set
CONFIG_NFC_ST21NFCA=m
# CONFIG_NFC_ST_NCI is not set
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
# CONFIG_NFC_S3FWRN5_I2C is not set
CONFIG_LWTUNNEL=y
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_DENALI_DT=m
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_GPIO=m
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_HISI504=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=m
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_LZ4_COMPRESS is not set
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SKD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m
CONFIG_BLK_DEV_NVME=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
CONFIG_BMP085=m
CONFIG_BMP085_I2C=m
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=m
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=m
#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=m
#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=m
#
# Intel MIC Card Driver
#
CONFIG_INTEL_MIC_CARD=m
#
# SCIF Driver
#
CONFIG_SCIF=m
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
CONFIG_MIC_COSM=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_AURORA=y
CONFIG_AURORA_NB8800=m
CONFIG_NET_CADENCE=y
CONFIG_MACB=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
CONFIG_BNX2X_VXLAN=y
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=m
CONFIG_THUNDER_NIC_VF=m
CONFIG_THUNDER_NIC_BGX=m
CONFIG_LIQUIDIO=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_CX_ECAT=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_VXLAN=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_VXLAN=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_VXLAN is not set
CONFIG_I40EVF=m
CONFIG_FM10K=m
CONFIG_FM10K_VXLAN=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_PCI=m
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_VXLAN=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QEDE=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
# CONFIG_SFC_MCDI_LOGGING is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=m
CONFIG_DWMAC_GENERIC=m
# CONFIG_STMMAC_PCI is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_ALE=m
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_AQUANTIA_PHY=m
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_TERANETICS_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_OCTEON=m
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_ADM8211=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
# CONFIG_WIL6210_TRACING is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
# CONFIG_ATH10K_TRACING is not set
CONFIG_WCN36XX=m
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
# CONFIG_IWLWIFI_UAPSD is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WL_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_WL_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_NVM=y
# CONFIG_NVM_DEBUG is not set
# CONFIG_NVM_GENNVM is not set
# CONFIG_NVM_RRPC is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FT6236=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_FINTEK=m
CONFIG_SERIAL_8250_MID=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX=m
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=m
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_ICH=m
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_VX855=m
# CONFIG_GPIO_ZX is not set
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_F7188X=m
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=m
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_LP3943=m
# CONFIG_GPIO_UCB1400 is not set
CONFIG_GPIO_WM8994=m
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_RDC321X=m
#
# SPI or I2C GPIO expanders
#
# CONFIG_GPIO_MCP23S08 is not set
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_PCF50633=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=m
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_CHARGER_RT9455=m
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_RN5T618_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_BCM7038_WDT=m
CONFIG_MEN_A21_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_HOST_SOC=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_HTC_PASIC3=m
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_JANZ_CMODIO=m
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RTSX_PCI=m
CONFIG_MFD_RTSX_USB=m
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=m
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS65218=m
# CONFIG_MFD_TPS65912 is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8994=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_WM8994=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160_AC97=y
CONFIG_VIDEO_STK1160=m
# CONFIG_VIDEO_GO7007 is not set
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
CONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_SMIPCIE=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_VIA_CAMERA=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VIM2M=m
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
#
# soc_camera sensor drivers
#
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_SOC_CAMERA_OV5642=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_SP2=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_RADEON_UMS is not set
CONFIG_DRM_AMDGPU=m
# CONFIG_DRM_AMDGPU_CIK is not set
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_HSA_AMD=m
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_SM501 is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
CONFIG_FB_AUO_K1901=m
# CONFIG_FB_HYPERV is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SM712=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_PM8941_WLED=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_VGASTATE=m
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CP2112=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_XHCI_PCI=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_HOST=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_ULPI is not set
CONFIG_USB_DWC3_HOST=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
CONFIG_USB_LED_TRIG=y
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_QIB_DCA=y
# CONFIG_INFINIBAND_CXGB3 is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV8803=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_PCF50633=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MT6397=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=m
CONFIG_DMA_ACPI=y
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IOATDMA=m
CONFIG_INTEL_MIC_X100_DMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
CONFIG_HSU_DMA=m
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
CONFIG_R8723AU=m
CONFIG_8723AU_AP_MODE=y
CONFIG_8723AU_BT_COEXIST=y
CONFIG_RTS5208=m
CONFIG_VT6655=m
CONFIG_VT6656=m
#
# IIO staging drivers
#
#
# Accelerometers
#
#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_I2C=m
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7746=m
#
# Direct Digital Synthesis
#
#
# Digital gyroscope sensors
#
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_TSL2583=m
CONFIG_TSL2x7x=m
#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
#
# Active energy metering IC
#
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
#
# Resolver to digital converters
#
#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=m
# CONFIG_IIO_SIMPLE_DUMMY is not set
CONFIG_FB_SM750=m
CONFIG_FB_XGI=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
CONFIG_STAGING_MEDIA=y
CONFIG_I2C_BCM2048=m
CONFIG_DVB_CXD2099=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_ZILOG=m
# CONFIG_STAGING_RDMA is not set
#
# Android
#
CONFIG_WIMAX_GDM72XX=m
# CONFIG_WIMAX_GDM72XX_QOS is not set
# CONFIG_WIMAX_GDM72XX_K_MODE is not set
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
# CONFIG_WIMAX_GDM72XX_USB_PM is not set
CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
CONFIG_CRYPTO_SKEIN=y
# CONFIG_UNISYSSPAR is not set
# CONFIG_WILC1000_DRIVER is not set
# CONFIG_MOST is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ALIENWARE_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=m
CONFIG_TOSHIBA_WMI=m
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
CONFIG_IBM_RTL=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_PVPANIC=m
CONFIG_INTEL_PMC_IPC=m
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_SI5351=m
# CONFIG_COMMON_CLK_PXA is not set
CONFIG_COMMON_CLK_CDCE706=m
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_BMA180=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_KXCJK1013=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
#
# Analog to digital converters
#
CONFIG_AD7291=m
CONFIG_AD799X=m
CONFIG_CC10001_ADC=m
CONFIG_MAX1363=m
CONFIG_MCP3422=m
CONFIG_NAU7802=m
CONFIG_TI_ADC081C=m
CONFIG_TI_AM335X_ADC=m
CONFIG_VIPERBOARD_ADC=m
#
# Amplifiers
#
#
# Chemical Sensors
#
# CONFIG_VZ89X is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_IIO_MS_SENSORS_I2C=m
#
# SSP Sensor Common
#
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=m
CONFIG_AD5446=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MCP4725=m
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_ITG3200=m
#
# Humidity sensors
#
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
#
# Inertial measurement units
#
CONFIG_KMX61=m
CONFIG_INV_MPU6050_IIO=m
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_BH1750=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM36651=m
CONFIG_GP2AP020A00F=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_STK3310=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
#
# Magnetometer sensors
#
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
#
# Digital potentiometers
#
CONFIG_MCP4531=m
#
# Pressure sensors
#
CONFIG_BMP280=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_MPL115=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_T5403=m
#
# Lightning sensors
#
#
# Proximity sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_SX9500=m
#
# Temperature sensors
#
CONFIG_MLX90614=m
CONFIG_TMP006=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_NTB=m
CONFIG_NTB_INTEL=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_TRANSPORT=m
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=m
CONFIG_FMC_FAKEDEV=m
CONFIG_FMC_TRIVIAL=m
CONFIG_FMC_WRITE_EEPROM=m
CONFIG_FMC_CHARDEV=m
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_AMD_MCE_INJ is not set
CONFIG_THUNDERBOLT=m
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_NVMEM=m
CONFIG_STM=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=m
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FS_ENCRYPTION=y
# CONFIG_F2FS_IO_TRACE is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
CONFIG_SQUASHFS_DECOMP_MULTI=y
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_V4_SECURITY_LABEL is not set
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
# CONFIG_AFS_FSCACHE is not set
CONFIG_9P_FS=m
# CONFIG_9P_FSCACHE is not set
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=0
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
# CONFIG_TRACING_EVENTS_GPIO is not set
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_TEST_HEXDUMP=m
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_MEMTEST=y
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_WX is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA1_MB=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=m
CONFIG_PKCS7_TEST_KEY=m
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
CONFIG_KVM_DEVICE_ASSIGNMENT=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
[-- Attachment #3: lsmod --]
[-- Type: text/plain, Size: 5789 bytes --]
Module Size Used by
nls_cp866 6049 0
mmc_block 28706 0
snd_seq_dummy 1762 0
snd_seq 53047 1 snd_seq_dummy
snd_seq_device 4417 1 snd_seq
usb_storage 55462 0
xt_conntrack 3544 1
ipt_MASQUERADE 1485 1
nf_nat_masquerade_ipv4 2715 1 ipt_MASQUERADE
iptable_nat 2251 1
nf_conntrack_ipv4 8585 2
nf_defrag_ipv4 1857 1 nf_conntrack_ipv4
nf_nat_ipv4 5904 1 iptable_nat
xt_addrtype 3099 2
iptable_filter 1994 1
ip_tables 16015 2 iptable_filter,iptable_nat
x_tables 22292 5 ip_tables,ipt_MASQUERADE,xt_conntrack,iptable_filter,xt_addrtype
br_netfilter 13754 0
nf_nat 15073 2 nf_nat_ipv4,nf_nat_masquerade_ipv4
nf_conntrack 75489 5 nf_nat,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4
bridge 109717 1 br_netfilter
stp 2252 1 bridge
llc 4893 2 stp,bridge
dm_thin_pool 53273 1
dm_persistent_data 54082 1 dm_thin_pool
dm_bio_prison 6392 1 dm_thin_pool
rfcomm 34570 4
bnep 11633 2
ipv6 333366 86 bridge
lp 10642 0
fuse 83694 3
snd_hda_codec_hdmi 39843 1
i2c_dev 6188 0
hid_generic 1551 0
usbhid 38230 0
uvcvideo 77076 0
videobuf2_vmalloc 5308 1 uvcvideo
ath3k 8899 0
videobuf2_memops 2011 1 videobuf2_vmalloc
videobuf2_v4l2 20913 1 uvcvideo
btusb 30625 0
videobuf2_core 23423 2 uvcvideo,videobuf2_v4l2
btrtl 4274 1 btusb
btbcm 7152 1 btusb
v4l2_common 4447 1 videobuf2_v4l2
btintel 7879 1 btusb
bluetooth 317444 15 bnep,ath3k,btbcm,btrtl,btusb,rfcomm,btintel
videodev 156803 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
hid 105936 2 hid_generic,usbhid
coretemp 6716 0
intel_rapl 10852 0
iosf_mbi 3821 1 intel_rapl
x86_pkg_temp_thermal 5531 0
intel_powerclamp 9053 0
hp_wmi 7913 0
sparse_keymap 3984 1 hp_wmi
i915 1177686 5
kvm 510615 0
irqbypass 3519 1 kvm
crct10dif_pclmul 5436 0
crc32_pclmul 3238 0
crc32c_intel 13415 0
joydev 9920 0
amdkfd 73535 1
amd_iommu_v2 8351 1 amdkfd
snd_hda_codec_idt 48991 1
rtsx_pci_sdmmc 10891 0
snd_hda_codec_generic 60511 1 snd_hda_codec_idt
mmc_core 106384 2 mmc_block,rtsx_pci_sdmmc
rtsx_pci_ms 5540 0
radeon 1482277 0
memstick 9061 1 rtsx_pci_ms
ppdev 6222 0
ath9k 104652 0
hwmon 4199 2 coretemp,radeon
ath9k_common 27052 1 ath9k
ttm 81244 1 radeon
ath9k_hw 436350 2 ath9k_common,ath9k
drm_kms_helper 117015 2 i915,radeon
snd_hda_intel 29595 13
ath 21211 3 ath9k_common,ath9k,ath9k_hw
mac80211 613391 1 ath9k
snd_hda_codec 108166 4 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_intel
drm 322782 8 ttm,i915,drm_kms_helper,radeon
snd_hda_core 52984 5 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
intel_gtt 13920 1 i915
snd_hwdep 6656 1 snd_hda_codec
agpgart 31796 3 drm,ttm,intel_gtt
cfg80211 530254 4 ath,ath9k_common,ath9k,mac80211
snd_pcm 92738 7 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
i2c_algo_bit 6033 2 i915,radeon
parport_pc 21152 0
psmouse 109893 0
fb_sys_fops 1730 1 drm_kms_helper
evdev 12526 24
syscopyarea 3458 1 drm_kms_helper
snd_timer 22237 5 snd_pcm,snd_seq
r8169 73230 0
sysfillrect 4078 1 drm_kms_helper
parport 37951 3 lp,ppdev,parport_pc
serio_raw 5210 0
sysimgblt 2544 1 drm_kms_helper
rfkill 18641 5 cfg80211,hp_wmi,bluetooth
snd 68941 30 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 6851 1 snd
i2c_core 47605 8 drm,i915,i2c_dev,drm_kms_helper,i2c_algo_bit,v4l2_common,radeon,videodev
mei_me 18627 0
mii 4951 1 r8169
xhci_pci 4873 0
thermal 10076 0
xhci_hcd 114959 1 xhci_pci
rtsx_pci 36347 2 rtsx_pci_ms,rtsx_pci_sdmmc
ehci_pci 4285 0
lpc_ich 14674 0
ehci_hcd 43839 1 ehci_pci
mei 62812 1 mei_me
8250_fintek 3278 0
hp_accel 18319 0
tpm_tis 11670 0
lis3lv02d 12797 1 hp_accel
wmi 9259 1 hp_wmi
tpm 35397 1 tpm_tis
input_polldev 4705 1 lis3lv02d
video 27613 1 i915
fjes 21800 0
hp_wireless 2277 0
battery 13464 0
button 5658 1 i915
processor 26834 0
ac 5184 0
loop 21599 6
^ permalink raw reply
* Re: [PATCH] cfg80211: add key management offload feature
From: Johannes Berg @ 2016-10-20 12:53 UTC (permalink / raw)
To: Jouni Malinen
Cc: Amitkumar Karwar, linux-wireless, hostap, Ilan Peer, yangzy,
Cathy Luo, Nishant Sarmukadam, lihz
In-Reply-To: <20161014135207.GB8928@w1.fi>
On Fri, 2016-10-14 at 16:52 +0300, Jouni Malinen wrote:
> On Tue, Sep 27, 2016 at 02:36:15PM +0200, Johannes Berg wrote:
> >
> > >
> > > + * @NL80211_ATTR_AUTHORIZED: flag attribute, if set indicates
> > > that the
> > > + * connection is authorized.
> > > @@ -2267,6 +2270,8 @@ enum nl80211_attrs {
> > > + NL80211_ATTR_AUTHORIZED,
> >
> > This already exists, no?
> >
> > NL80211_STA_FLAG_AUTHORIZED should be more or less equivalent, if
> > you do it per station (or just for the AP in case of managed
> > connection)
>
> It does indeed have a very similar meaning to the proposed
> NL80211_ATTR_AUTHORIZED. However, NL80211_STA_FLAG_AUTHORIZED is
> something that gets nested in NL80211_ATTR_STA or used with the
> mask/set struct in NL80211_ATTR_STA_FLAGS2. I'm not sure either of
> those would really be very clean ways to use with a connection/roam
> event..
Oh, right, this is used in the event, not for control...
I guess that makes sense then, although it should be a flag attribute
instead of a u8?
We could still put a nested NL80211_ATTR_STA, but I agree that seems
awkward.
> PMKSA caching cases, FT protocol, and 4-way handshake following EAP
> might be doable in this manner and that might indeed be the cleanest
> approach there.
Ok
> However, there will also be need to cover possibility
> for offloading FILS at some point in the future..
Yeah, I hadn't considered FILS.
> For FILS with shared key, the configuration will actually include ERP
> keys that are not bound to any specific Authenticator/AP/BSSID and do
> not really have a PMKSA cache entry.. At latest at that point, I'd
> think we'll end up needing something else and that something else
> could be defined already now to cover all these cases instead of
> trying to force the current cases to go through
> NL80211_CMD_SET_PMKSA.
Could be done, I guess. But don't we then have to be careful to
actually bind the non-FILS keys to the right Authenticator/AP/BSSID,
and then we have to invent a way to bind it? Does that make sense?
> > In particular, with key management offloaded, it's not clear to me
> > what exactly the roles of the device and host are here. I'm
> > considering that the device would handle the 4-way and 2-way
> > handshakes, but then you wouldn't need the KEK/KCK/ReplayCounter in
> > the host, so there wouldn't be much point in giving them to it.
> > But if the device doesn't do that, what exactly *does* it do?
>
> One of the key uses is to allow the Wi-Fi firmware to complete
> roaming (say, 4-way handshake based on existing PMKSA) when the host
> processor is not awake (i.e., wpa_supplicant is not running at all).
Ah. So this might not be used when the processor *is* awake? That's a
key point I was missing, perhaps, since we're building something where
it's simply always done by the device.
Why would you want to do it in the processor when you have the ability
to do it in the firmware?
> However, this does not mean that we would necessarily offload all
> EAPOL-Key processing. GTK rekeying and the initial 4-way handshake
> for the first connection to an ESS might be performed by
> wpa_supplicant especially in cases where the host is awake anyway.
> That's why those PTK-related values need to be kept in sync between
> the driver/firmware and host (wpa_supplicant).
Interesting, ok. Whatever the reason, I guess we have to support it
being done that way.
I guess we'll have to hash out the exact details.
I think we can publish a proposal soon that uses the PMKSA cache, but
lacks all the event data since we never see EAPOL-key messages on the
host in that model.
This model here with the temporal key etc. stuff is clearly unworkable.
I'm not sure I've made up my mind on introducing a new mechanism that
covers FILS vs. PMKSA (and then later an only-FILS-style mechanism) -
that's the issue with binding to a BSSID above.
johannes
^ permalink raw reply
* Re: [PATCH] cfg80211: allow vendor commands to be sent to nan interface
From: Johannes Berg @ 2016-10-20 12:45 UTC (permalink / raw)
To: Arend Van Spriel, Luca Coelho
Cc: linux-wireless, Andrei Otcheretianski, Luca Coelho
In-Reply-To: <2fb83452-e4c2-f08c-c21b-b51c17401a3b@broadcom.com>
On Thu, 2016-10-20 at 14:44 +0200, Arend Van Spriel wrote:
>
> Sure. On top of this patch or will you deal with those conflicts?
>
I already applied this, so on top please (i.e. just resend what you
just had, with a commit message?)
johannes
^ permalink raw reply
* Re: [PATCH] cfg80211: allow vendor commands to be sent to nan interface
From: Arend Van Spriel @ 2016-10-20 12:44 UTC (permalink / raw)
To: Johannes Berg, Luca Coelho
Cc: linux-wireless, Andrei Otcheretianski, Luca Coelho
In-Reply-To: <1476967356.4929.20.camel@sipsolutions.net>
On 20-10-2016 14:42, Johannes Berg wrote:
>
>> Seeing this patch flying by, my itch became unbearable so I cooked up
>> the patch below. Please consider this an RFC and let me know your
>> thoughts.
>
> Hah, I had this itch before, but didn't do anything about it yet :)
>
> I like it though, care to submit it properly?
Sure. On top of this patch or will you deal with those conflicts?
Regards,
Arend
^ permalink raw reply
* Re: [PATCH] cfg80211: allow vendor commands to be sent to nan interface
From: Johannes Berg @ 2016-10-20 12:42 UTC (permalink / raw)
To: Arend Van Spriel, Luca Coelho
Cc: linux-wireless, Andrei Otcheretianski, Luca Coelho
In-Reply-To: <e7d135c6-e114-ffa5-a52f-3ee85c18641e@broadcom.com>
> Seeing this patch flying by, my itch became unbearable so I cooked up
> the patch below. Please consider this an RFC and let me know your
> thoughts.
Hah, I had this itch before, but didn't do anything about it yet :)
I like it though, care to submit it properly?
johannes
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox