* [PATCH v2 02/13] wil6210: add disable_ap_sme module parameter
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Dedy Lansky, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
By default, AP SME is handled by driver/FW.
In case disable_ap_sme is true, driver doesn't turn-on
WIPHY_FLAG_HAVE_AP_SME and the responsibility for
AP SME is passed to user space.
With AP SME disabled, driver reports assoc request frame
to user space which is then responsible for sending assoc
response frame and for sending NL80211_CMD_NEW_STATION.
Driver also reports disassoc frame to user space
which should then send NL80211_CMD_DEL_STATION.
NL80211_CMD_SET_STATION with NL80211_STA_FLAG_AUTHORIZED
is used by user space to allow/disallow data transmit.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 92 +++++++++++++++++++++++++++--
drivers/net/wireless/ath/wil6210/main.c | 10 +++-
drivers/net/wireless/ath/wil6210/wil6210.h | 9 ++-
drivers/net/wireless/ath/wil6210/wmi.c | 68 +++++++++++++++++----
drivers/net/wireless/ath/wil6210/wmi.h | 23 +++++++-
5 files changed, 178 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 54dd116..e6001bb 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -20,6 +20,10 @@
#define WIL_MAX_ROC_DURATION_MS 5000
+bool disable_ap_sme;
+module_param(disable_ap_sme, bool, S_IRUGO);
+MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME");
+
#define CHAN60G(_channel, _flags) { \
.band = NL80211_BAND_60GHZ, \
.center_freq = 56160 + (2160 * (_channel)), \
@@ -62,9 +66,16 @@
},
[NL80211_IFTYPE_AP] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
- BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
+ BIT(IEEE80211_STYPE_PROBE_RESP >> 4) |
+ BIT(IEEE80211_STYPE_ASSOC_RESP >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4),
.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
- BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4)
},
[NL80211_IFTYPE_P2P_CLIENT] = {
.tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
@@ -1322,6 +1333,28 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
return 0;
}
+static int wil_cfg80211_add_station(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *mac,
+ struct station_parameters *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+
+ wil_dbg_misc(wil, "add station %pM aid %d\n", mac, params->aid);
+
+ if (!disable_ap_sme) {
+ wil_err(wil, "not supported with AP SME enabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (params->aid > WIL_MAX_DMG_AID) {
+ wil_err(wil, "invalid aid\n");
+ return -EINVAL;
+ }
+
+ return wmi_new_sta(wil, mac, params->aid);
+}
+
static int wil_cfg80211_del_station(struct wiphy *wiphy,
struct net_device *dev,
struct station_del_parameters *params)
@@ -1338,6 +1371,52 @@ static int wil_cfg80211_del_station(struct wiphy *wiphy,
return 0;
}
+static int wil_cfg80211_change_station(struct wiphy *wiphy,
+ struct net_device *dev,
+ const u8 *mac,
+ struct station_parameters *params)
+{
+ struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+ int authorize;
+ int cid, i;
+ struct vring_tx_data *txdata = NULL;
+
+ wil_dbg_misc(wil, "change station %pM mask 0x%x set 0x%x\n", mac,
+ params->sta_flags_mask, params->sta_flags_set);
+
+ if (!disable_ap_sme) {
+ wil_dbg_misc(wil, "not supported with AP SME enabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!(params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)))
+ return 0;
+
+ cid = wil_find_cid(wil, mac);
+ if (cid < 0) {
+ wil_err(wil, "station not found\n");
+ return -ENOLINK;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wil->vring2cid_tid); i++)
+ if (wil->vring2cid_tid[i][0] == cid) {
+ txdata = &wil->vring_tx_data[i];
+ break;
+ }
+
+ if (!txdata) {
+ wil_err(wil, "vring data not found\n");
+ return -ENOLINK;
+ }
+
+ authorize = params->sta_flags_set & BIT(NL80211_STA_FLAG_AUTHORIZED);
+ txdata->dot1x_open = authorize ? 1 : 0;
+ wil_dbg_misc(wil, "cid %d vring %d authorize %d\n", cid, i,
+ txdata->dot1x_open);
+
+ return 0;
+}
+
/* probe_client handling */
static void wil_probe_client_handle(struct wil6210_priv *wil,
struct wil_probe_client_req *req)
@@ -1521,7 +1600,9 @@ static int wil_cfg80211_set_power_mgmt(struct wiphy *wiphy,
.change_beacon = wil_cfg80211_change_beacon,
.start_ap = wil_cfg80211_start_ap,
.stop_ap = wil_cfg80211_stop_ap,
+ .add_station = wil_cfg80211_add_station,
.del_station = wil_cfg80211_del_station,
+ .change_station = wil_cfg80211_change_station,
.probe_client = wil_cfg80211_probe_client,
.change_bss = wil_cfg80211_change_bss,
/* P2P device */
@@ -1542,10 +1623,11 @@ static void wil_wiphy_init(struct wiphy *wiphy)
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_DEVICE) |
BIT(NL80211_IFTYPE_MONITOR);
- wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
- WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
+ wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
WIPHY_FLAG_PS_ON_BY_DEFAULT;
+ if (!disable_ap_sme)
+ wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME;
dev_dbg(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
__func__, wiphy->flags);
wiphy->probe_resp_offload =
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index e2e021b..57c19d0 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -176,8 +176,12 @@ static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
sta->status);
/* inform upper/lower layers */
if (sta->status != wil_sta_unused) {
- if (!from_event)
- wmi_disconnect_sta(wil, sta->addr, reason_code, true);
+ if (!from_event) {
+ bool del_sta = (wdev->iftype == NL80211_IFTYPE_AP) ?
+ disable_ap_sme : false;
+ wmi_disconnect_sta(wil, sta->addr, reason_code,
+ true, del_sta);
+ }
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 07d4f76..1cd92c6 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -33,6 +33,7 @@
extern u32 vring_idle_trsh;
extern bool rx_align_2;
extern bool debug_fw;
+extern bool disable_ap_sme;
#define WIL_NAME "wil6210"
#define WIL_FW_NAME "wil6210.fw" /* code */
@@ -98,6 +99,9 @@ static inline u32 wil_mtu2macbuf(u32 mtu)
#define WIL6210_RX_HIGH_TRSH_INIT (0)
#define WIL6210_RX_HIGH_TRSH_DEFAULT \
(1 << (WIL_RX_RING_SIZE_ORDER_DEFAULT - 3))
+#define WIL_MAX_DMG_AID 254 /* for DMG only 1-254 allowed (see
+ * 802.11REVmc/D5.0, section 9.4.1.8)
+ */
/* Hardware definitions begin */
/*
@@ -816,8 +820,8 @@ int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
int wmi_rxon(struct wil6210_priv *wil, bool on);
int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
-int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason,
- bool full_disconnect);
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac,
+ u16 reason, bool full_disconnect, bool del_sta);
int wmi_addba(struct wil6210_priv *wil, u8 ringid, u8 size, u16 timeout);
int wmi_delba_tx(struct wil6210_priv *wil, u8 ringid, u16 reason);
int wmi_delba_rx(struct wil6210_priv *wil, u8 cidxtid, u16 reason);
@@ -827,6 +831,7 @@ int wmi_ps_dev_profile_cfg(struct wil6210_priv *wil,
enum wmi_ps_profile_type ps_profile);
int wmi_set_mgmt_retry(struct wil6210_priv *wil, u8 retry_short);
int wmi_get_mgmt_retry(struct wil6210_priv *wil, u8 *retry_short);
+int wmi_new_sta(struct wil6210_priv *wil, const u8 *mac, u8 aid);
int wil_addba_rx_request(struct wil6210_priv *wil, u8 cidxtid,
u8 dialog_token, __le16 ba_param_set,
__le16 ba_timeout, __le16 ba_seq_ctrl);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 7585003..556acd3 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -556,7 +556,7 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
wil_err(wil, "%s: config tx vring failed for CID %d, rc (%d)\n",
__func__, evt->cid, rc);
wmi_disconnect_sta(wil, wil->sta[evt->cid].addr,
- WLAN_REASON_UNSPECIFIED, false);
+ WLAN_REASON_UNSPECIFIED, false, false);
} else {
wil_info(wil, "%s: successful connection to CID %d\n",
__func__, evt->cid);
@@ -583,8 +583,12 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
}
} else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
(wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
- if (rc)
+ if (rc) {
+ if (disable_ap_sme)
+ /* notify new_sta has failed */
+ cfg80211_del_sta(ndev, evt->bssid, GFP_KERNEL);
goto out;
+ }
memset(&sinfo, 0, sizeof(sinfo));
@@ -687,6 +691,7 @@ static void wmi_evt_vring_en(struct wil6210_priv *wil, int id, void *d, int len)
{
struct wmi_vring_en_event *evt = d;
u8 vri = evt->vring_index;
+ struct wireless_dev *wdev = wil_to_wdev(wil);
wil_dbg_wmi(wil, "Enable vring %d\n", vri);
@@ -694,7 +699,12 @@ static void wmi_evt_vring_en(struct wil6210_priv *wil, int id, void *d, int len)
wil_err(wil, "Enable for invalid vring %d\n", vri);
return;
}
- wil->vring_tx_data[vri].dot1x_open = true;
+
+ if (wdev->iftype != NL80211_IFTYPE_AP || !disable_ap_sme)
+ /* in AP mode with disable_ap_sme, this is done by
+ * wil_cfg80211_change_station()
+ */
+ wil->vring_tx_data[vri].dot1x_open = true;
if (vri == wil->bcast_vring) /* no BA for bcast */
return;
if (agg_wsize >= 0)
@@ -1069,6 +1079,7 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
.pcp_max_assoc_sta = max_assoc_sta,
.hidden_ssid = hidden_ssid,
.is_go = is_go,
+ .disable_ap_sme = disable_ap_sme,
};
struct {
struct wmi_cmd_hdr wmi;
@@ -1086,6 +1097,13 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
cmd.pcp_max_assoc_sta = WIL6210_MAX_CID;
}
+ if (disable_ap_sme &&
+ !test_bit(WMI_FW_CAPABILITY_DISABLE_AP_SME,
+ wil->fw_capabilities)) {
+ wil_err(wil, "disable_ap_sme not supported by FW\n");
+ return -EOPNOTSUPP;
+ }
+
/*
* Processing time may be huge, in case of secure AP it takes about
* 3500ms for FW to start AP
@@ -1456,12 +1474,15 @@ int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_bb, u32 *t_rf)
return 0;
}
-int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason,
- bool full_disconnect)
+int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac,
+ u16 reason, bool full_disconnect, bool del_sta)
{
int rc;
u16 reason_code;
- struct wmi_disconnect_sta_cmd cmd = {
+ struct wmi_disconnect_sta_cmd disc_sta_cmd = {
+ .disconnect_reason = cpu_to_le16(reason),
+ };
+ struct wmi_del_sta_cmd del_sta_cmd = {
.disconnect_reason = cpu_to_le16(reason),
};
struct {
@@ -1469,12 +1490,19 @@ int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason,
struct wmi_disconnect_event evt;
} __packed reply;
- ether_addr_copy(cmd.dst_mac, mac);
-
wil_dbg_wmi(wil, "%s(%pM, reason %d)\n", __func__, mac, reason);
- rc = wmi_call(wil, WMI_DISCONNECT_STA_CMDID, &cmd, sizeof(cmd),
- WMI_DISCONNECT_EVENTID, &reply, sizeof(reply), 1000);
+ if (del_sta) {
+ ether_addr_copy(del_sta_cmd.dst_mac, mac);
+ rc = wmi_call(wil, WMI_DEL_STA_CMDID, &del_sta_cmd,
+ sizeof(del_sta_cmd), WMI_DISCONNECT_EVENTID,
+ &reply, sizeof(reply), 1000);
+ } else {
+ ether_addr_copy(disc_sta_cmd.dst_mac, mac);
+ rc = wmi_call(wil, WMI_DISCONNECT_STA_CMDID, &disc_sta_cmd,
+ sizeof(disc_sta_cmd), WMI_DISCONNECT_EVENTID,
+ &reply, sizeof(reply), 1000);
+ }
/* failure to disconnect in reasonable time treated as FW error */
if (rc) {
wil_fw_error_recovery(wil);
@@ -1686,6 +1714,24 @@ int wmi_abort_scan(struct wil6210_priv *wil)
return rc;
}
+int wmi_new_sta(struct wil6210_priv *wil, const u8 *mac, u8 aid)
+{
+ int rc;
+ struct wmi_new_sta_cmd cmd = {
+ .aid = aid,
+ };
+
+ wil_dbg_wmi(wil, "new sta %pM, aid %d\n", mac, aid);
+
+ ether_addr_copy(cmd.dst_mac, mac);
+
+ rc = wmi_send(wil, WMI_NEW_STA_CMDID, &cmd, sizeof(cmd));
+ if (rc)
+ wil_err(wil, "Failed to send new sta (%d)\n", rc);
+
+ return rc;
+}
+
void wmi_event_flush(struct wil6210_priv *wil)
{
struct pending_wmi_event *evt, *t;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index d93a4d4..9c4a0bd 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
* Copyright (c) 2006-2012 Wilocity
*
* Permission to use, copy, modify, and/or distribute this software for any
@@ -56,6 +56,7 @@ enum wmi_fw_capability {
WMI_FW_CAPABILITY_PS_CONFIG = 1,
WMI_FW_CAPABILITY_RF_SECTORS = 2,
WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT = 3,
+ WMI_FW_CAPABILITY_DISABLE_AP_SME = 4,
WMI_FW_CAPABILITY_MAX,
};
@@ -187,6 +188,8 @@ enum wmi_command_id {
WMI_AOA_MEAS_CMDID = 0x923,
WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
+ WMI_NEW_STA_CMDID = 0x935,
+ WMI_DEL_STA_CMDID = 0x936,
WMI_TOF_SESSION_START_CMDID = 0x991,
WMI_TOF_GET_CAPABILITIES_CMDID = 0x992,
WMI_TOF_SET_LCR_CMDID = 0x993,
@@ -543,7 +546,8 @@ struct wmi_pcp_start_cmd {
u8 pcp_max_assoc_sta;
u8 hidden_ssid;
u8 is_go;
- u8 reserved0[7];
+ u8 reserved0[6];
+ u8 disable_ap_sme;
u8 network_type;
u8 channel;
u8 disable_sec_offload;
@@ -902,6 +906,18 @@ struct wmi_set_mgmt_retry_limit_cmd {
u8 reserved[3];
} __packed;
+/* WMI_NEW_STA_CMDID */
+struct wmi_new_sta_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ u8 aid;
+} __packed;
+
+/* WMI_DEL_STA_CMDID */
+struct wmi_del_sta_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 disconnect_reason;
+} __packed;
+
enum wmi_tof_burst_duration {
WMI_TOF_BURST_DURATION_250_USEC = 2,
WMI_TOF_BURST_DURATION_500_USEC = 3,
@@ -1292,7 +1308,7 @@ struct wmi_connect_event {
u8 assoc_info[0];
} __packed;
-/* WMI_DISCONNECT_EVENTID */
+/* disconnect_reason */
enum wmi_disconnect_reason {
WMI_DIS_REASON_NO_NETWORK_AVAIL = 0x01,
/* bmiss */
@@ -1310,6 +1326,7 @@ enum wmi_disconnect_reason {
WMI_DIS_REASON_IBSS_MERGE = 0x0E,
};
+/* WMI_DISCONNECT_EVENTID */
struct wmi_disconnect_event {
/* reason code, see 802.11 spec. */
__le16 protocol_reason_status;
--
1.9.1
^ permalink raw reply related
* [PATCH v2 03/13] wil6210: support loading dedicated image for sparrow-plus devices
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lazar Alexei, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Driver may be used in platforms where some use sparrow cards while
other use sparrow-plus cards, where different FW image is needed.
Add the capability to load dedicated FW image in case sparrow-plus
card is detected and fallback to default image if such does not exist.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/debugfs.c | 3 ++-
drivers/net/wireless/ath/wil6210/fw.c | 7 +++---
drivers/net/wireless/ath/wil6210/fw_inc.c | 21 ++++++++++++++++-
drivers/net/wireless/ath/wil6210/main.c | 8 +++----
drivers/net/wireless/ath/wil6210/pcie_bus.c | 36 ++++++++++++++++++++++-------
drivers/net/wireless/ath/wil6210/wil6210.h | 18 +++++++++++----
6 files changed, 72 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 5e4058a..e5a8382 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -1699,6 +1699,7 @@ static void wil6210_debugfs_init_isr(struct wil6210_priv *wil,
WIL_FIELD(recovery_count, S_IRUGO, doff_u32),
WIL_FIELD(ap_isolate, S_IRUGO, doff_u32),
WIL_FIELD(discovery_mode, S_IRUGO | S_IWUSR, doff_u8),
+ WIL_FIELD(chip_revision, S_IRUGO, doff_u8),
{},
};
diff --git a/drivers/net/wireless/ath/wil6210/fw.c b/drivers/net/wireless/ath/wil6210/fw.c
index 82aae2d..540fc20 100644
--- a/drivers/net/wireless/ath/wil6210/fw.c
+++ b/drivers/net/wireless/ath/wil6210/fw.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2015,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -19,8 +19,9 @@
#include "wil6210.h"
#include "fw.h"
-MODULE_FIRMWARE(WIL_FW_NAME);
-MODULE_FIRMWARE(WIL_FW2_NAME);
+MODULE_FIRMWARE(WIL_FW_NAME_DEFAULT);
+MODULE_FIRMWARE(WIL_FW_NAME_SPARROW_PLUS);
+MODULE_FIRMWARE(WIL_BOARD_FILE_NAME);
static
void wil_memset_toio_32(volatile void __iomem *dst, u32 val,
diff --git a/drivers/net/wireless/ath/wil6210/fw_inc.c b/drivers/net/wireless/ath/wil6210/fw_inc.c
index 8f40eb3..f4901587 100644
--- a/drivers/net/wireless/ath/wil6210/fw_inc.c
+++ b/drivers/net/wireless/ath/wil6210/fw_inc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -537,3 +537,22 @@ int wil_request_firmware(struct wil6210_priv *wil, const char *name,
release_firmware(fw);
return rc;
}
+
+/**
+ * wil_fw_verify_file_exists - checks if firmware file exist
+ *
+ * @wil: driver context
+ * @name: firmware file name
+ *
+ * return value - boolean, true for success, false for failure
+ */
+bool wil_fw_verify_file_exists(struct wil6210_priv *wil, const char *name)
+{
+ const struct firmware *fw;
+ int rc;
+
+ rc = request_firmware(&fw, name, wil_to_dev(wil));
+ if (!rc)
+ release_firmware(fw);
+ return rc != -ENOENT;
+}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 57c19d0..3580c6d 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -934,16 +934,16 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
wil_set_oob_mode(wil, oob_mode);
if (load_fw) {
- wil_info(wil, "Use firmware <%s> + board <%s>\n", WIL_FW_NAME,
- WIL_FW2_NAME);
+ wil_info(wil, "Use firmware <%s> + board <%s>\n",
+ wil->wil_fw_name, WIL_BOARD_FILE_NAME);
wil_halt_cpu(wil);
memset(wil->fw_version, 0, sizeof(wil->fw_version));
/* Loading f/w from the file */
- rc = wil_request_firmware(wil, WIL_FW_NAME, true);
+ rc = wil_request_firmware(wil, wil->wil_fw_name, true);
if (rc)
return rc;
- rc = wil_request_firmware(wil, WIL_FW2_NAME, true);
+ rc = wil_request_firmware(wil, WIL_BOARD_FILE_NAME, true);
if (rc)
return rc;
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 6b8f4d21..eab74c4 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -36,18 +36,38 @@ static int wil6210_pm_notify(struct notifier_block *notify_block,
static
void wil_set_capabilities(struct wil6210_priv *wil)
{
- u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
+ u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
+ u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
+ RGF_USER_REVISION_ID_MASK);
bitmap_zero(wil->hw_capabilities, hw_capability_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
-
- switch (rev_id) {
- case JTAG_DEV_ID_SPARROW_B0:
- wil->hw_name = "Sparrow B0";
- wil->hw_version = HW_VER_SPARROW_B0;
+ wil->wil_fw_name = WIL_FW_NAME_DEFAULT;
+ wil->chip_revision = chip_revision;
+
+ switch (jtag_id) {
+ case JTAG_DEV_ID_SPARROW:
+ switch (chip_revision) {
+ case REVISION_ID_SPARROW_D0:
+ wil->hw_name = "Sparrow D0";
+ wil->hw_version = HW_VER_SPARROW_D0;
+ if (wil_fw_verify_file_exists(wil,
+ WIL_FW_NAME_SPARROW_PLUS))
+ wil->wil_fw_name = WIL_FW_NAME_SPARROW_PLUS;
+ break;
+ case REVISION_ID_SPARROW_B0:
+ wil->hw_name = "Sparrow B0";
+ wil->hw_version = HW_VER_SPARROW_B0;
+ break;
+ default:
+ wil->hw_name = "Unknown";
+ wil->hw_version = HW_VER_UNKNOWN;
+ break;
+ }
break;
default:
- wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id);
+ wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
+ jtag_id, chip_revision);
wil->hw_name = "Unknown";
wil->hw_version = HW_VER_UNKNOWN;
}
@@ -55,7 +75,7 @@ void wil_set_capabilities(struct wil6210_priv *wil)
wil_info(wil, "Board hardware is %s\n", wil->hw_name);
/* extract FW capabilities from file without loading the FW */
- wil_request_firmware(wil, WIL_FW_NAME, false);
+ wil_request_firmware(wil, wil->wil_fw_name, false);
}
void wil_disable_irq(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 1cd92c6..b9febed 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -36,8 +36,9 @@
extern bool disable_ap_sme;
#define WIL_NAME "wil6210"
-#define WIL_FW_NAME "wil6210.fw" /* code */
-#define WIL_FW2_NAME "wil6210.brd" /* board & radio parameters */
+#define WIL_FW_NAME_DEFAULT "wil6210.fw" /* code Sparrow B0 */
+#define WIL_FW_NAME_SPARROW_PLUS "wil6210_sparrow_plus.fw" /* code Sparrow D0 */
+#define WIL_BOARD_FILE_NAME "wil6210.brd" /* board & radio parameters */
#define WIL_MAX_BUS_REQUEST_KBPS 800000 /* ~6.1Gbps */
@@ -253,7 +254,12 @@ struct RGF_ICR {
#define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0)
#define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */
- #define JTAG_DEV_ID_SPARROW_B0 (0x2632072f)
+ #define JTAG_DEV_ID_SPARROW (0x2632072f)
+
+#define RGF_USER_REVISION_ID (0x88afe4)
+#define RGF_USER_REVISION_ID_MASK (3)
+ #define REVISION_ID_SPARROW_B0 (0x0)
+ #define REVISION_ID_SPARROW_D0 (0x3)
/* crash codes for FW/Ucode stored here */
#define RGF_FW_ASSERT_CODE (0x91f020)
@@ -261,7 +267,8 @@ struct RGF_ICR {
enum {
HW_VER_UNKNOWN,
- HW_VER_SPARROW_B0, /* JTAG_DEV_ID_SPARROW_B0 */
+ HW_VER_SPARROW_B0, /* REVISION_ID_SPARROW_B0 */
+ HW_VER_SPARROW_D0, /* REVISION_ID_SPARROW_D0 */
};
/* popular locations */
@@ -587,7 +594,9 @@ struct wil6210_priv {
DECLARE_BITMAP(status, wil_status_last);
u8 fw_version[ETHTOOL_FWVERS_LEN];
u32 hw_version;
+ u8 chip_revision;
const char *hw_name;
+ const char *wil_fw_name;
DECLARE_BITMAP(hw_capabilities, hw_capability_last);
DECLARE_BITMAP(fw_capabilities, WMI_FW_CAPABILITY_MAX);
u8 n_mids; /* number of additional MIDs as reported by FW */
@@ -925,6 +934,7 @@ void wil_update_net_queues_bh(struct wil6210_priv *wil, struct vring *vring,
int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd);
int wil_request_firmware(struct wil6210_priv *wil, const char *name,
bool load);
+bool wil_fw_verify_file_exists(struct wil6210_priv *wil, const char *name);
int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime);
int wil_suspend(struct wil6210_priv *wil, bool is_runtime);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 04/13] wil6210: remove __func__ from debug printouts
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lazar Alexei, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
__func__ is automatically added to printouts by dynamic debug
mechanism and by wil_info/wil_err macros.
Remove __func__ from debug printouts to avoid duplication.
Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 79 +++++++++++------------
drivers/net/wireless/ath/wil6210/debugfs.c | 4 +-
drivers/net/wireless/ath/wil6210/ethtool.c | 10 +--
drivers/net/wireless/ath/wil6210/interrupt.c | 30 ++++-----
drivers/net/wireless/ath/wil6210/main.c | 50 +++++++-------
drivers/net/wireless/ath/wil6210/netdev.c | 14 ++--
drivers/net/wireless/ath/wil6210/p2p.c | 36 +++++------
drivers/net/wireless/ath/wil6210/pcie_bus.c | 14 ++--
drivers/net/wireless/ath/wil6210/pm.c | 17 ++---
drivers/net/wireless/ath/wil6210/pmc.c | 79 +++++++++++------------
drivers/net/wireless/ath/wil6210/rx_reorder.c | 8 +--
drivers/net/wireless/ath/wil6210/txrx.c | 36 ++++++-----
drivers/net/wireless/ath/wil6210/wil_crash_dump.c | 18 +++---
drivers/net/wireless/ath/wil6210/wmi.c | 50 +++++++-------
14 files changed, 211 insertions(+), 234 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index e6001bb..f8499a8 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -205,7 +205,7 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
int cid = wil_find_cid(wil, mac);
- wil_dbg_misc(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+ wil_dbg_misc(wil, "get_station: %pM CID %d\n", mac, cid);
if (cid < 0)
return cid;
@@ -244,7 +244,7 @@ static int wil_cfg80211_dump_station(struct wiphy *wiphy,
return -ENOENT;
ether_addr_copy(mac, wil->sta[cid].addr);
- wil_dbg_misc(wil, "%s(%pM) CID %d\n", __func__, mac, cid);
+ wil_dbg_misc(wil, "dump_station: %pM CID %d\n", mac, cid);
rc = wil_cid_fill_sinfo(wil, cid, sinfo);
@@ -261,16 +261,15 @@ static int wil_cfg80211_dump_station(struct wiphy *wiphy,
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *p2p_wdev;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "add_iface\n");
if (type != NL80211_IFTYPE_P2P_DEVICE) {
- wil_err(wil, "%s: unsupported iftype %d\n", __func__, type);
+ wil_err(wil, "unsupported iftype %d\n", type);
return ERR_PTR(-EINVAL);
}
if (wil->p2p_wdev) {
- wil_err(wil, "%s: P2P_DEVICE interface already created\n",
- __func__);
+ wil_err(wil, "P2P_DEVICE interface already created\n");
return ERR_PTR(-EINVAL);
}
@@ -293,11 +292,10 @@ static int wil_cfg80211_del_iface(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "del_iface\n");
if (wdev != wil->p2p_wdev) {
- wil_err(wil, "%s: delete of incorrect interface 0x%p\n",
- __func__, wdev);
+ wil_err(wil, "delete of incorrect interface 0x%p\n", wdev);
return -EINVAL;
}
@@ -315,7 +313,7 @@ static int wil_cfg80211_change_iface(struct wiphy *wiphy,
struct wireless_dev *wdev = wil_to_wdev(wil);
int rc;
- wil_dbg_misc(wil, "%s() type=%d\n", __func__, type);
+ wil_dbg_misc(wil, "change_iface: type=%d\n", type);
if (netif_running(wil_to_ndev(wil)) && !wil_is_recovery_blocked(wil)) {
wil_dbg_misc(wil, "interface is up. resetting...\n");
@@ -362,8 +360,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
uint i, n;
int rc;
- wil_dbg_misc(wil, "%s(), wdev=0x%p iftype=%d\n",
- __func__, wdev, wdev->iftype);
+ wil_dbg_misc(wil, "scan: wdev=0x%p iftype=%d\n", wdev, wdev->iftype);
/* check we are client side */
switch (wdev->iftype) {
@@ -568,7 +565,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
int rc = 0;
enum ieee80211_bss_type bss_type = IEEE80211_BSS_TYPE_ESS;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "connect\n");
wil_print_connect_params(wil, sme);
if (test_bit(wil_status_fwconnecting, wil->status) ||
@@ -700,12 +697,11 @@ static int wil_cfg80211_disconnect(struct wiphy *wiphy,
int rc;
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s(reason=%d)\n", __func__, reason_code);
+ wil_dbg_misc(wil, "disconnect: reason=%d\n", reason_code);
if (!(test_bit(wil_status_fwconnecting, wil->status) ||
test_bit(wil_status_fwconnected, wil->status))) {
- wil_err(wil, "%s: Disconnect was called while disconnected\n",
- __func__);
+ wil_err(wil, "Disconnect was called while disconnected\n");
return 0;
}
@@ -713,7 +709,7 @@ static int wil_cfg80211_disconnect(struct wiphy *wiphy,
WMI_DISCONNECT_EVENTID, NULL, 0,
WIL6210_DISCONNECT_TO_MS);
if (rc)
- wil_err(wil, "%s: disconnect error %d\n", __func__, rc);
+ wil_err(wil, "disconnect error %d\n", rc);
return rc;
}
@@ -761,7 +757,7 @@ int wil_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
* different from currently "listened" channel and fail if it is.
*/
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "mgmt_tx\n");
print_hex_dump_bytes("mgmt tx frame ", DUMP_PREFIX_OFFSET, buf, len);
cmd = kmalloc(sizeof(*cmd) + len, GFP_KERNEL);
@@ -822,7 +818,7 @@ static enum wmi_key_usage wil_detect_key_usage(struct wil6210_priv *wil,
break;
}
}
- wil_dbg_misc(wil, "%s() -> %s\n", __func__, key_usage_str[rc]);
+ wil_dbg_misc(wil, "detect_key_usage: -> %s\n", key_usage_str[rc]);
return rc;
}
@@ -927,13 +923,13 @@ static int wil_cfg80211_add_key(struct wiphy *wiphy,
return -EINVAL;
}
- wil_dbg_misc(wil, "%s(%pM %s[%d] PN %*phN)\n", __func__,
+ wil_dbg_misc(wil, "add_key: %pM %s[%d] PN %*phN\n",
mac_addr, key_usage_str[key_usage], key_index,
params->seq_len, params->seq);
if (IS_ERR(cs)) {
- wil_err(wil, "Not connected, %s(%pM %s[%d] PN %*phN)\n",
- __func__, mac_addr, key_usage_str[key_usage], key_index,
+ wil_err(wil, "Not connected, %pM %s[%d] PN %*phN\n",
+ mac_addr, key_usage_str[key_usage], key_index,
params->seq_len, params->seq);
return -EINVAL;
}
@@ -942,8 +938,8 @@ static int wil_cfg80211_add_key(struct wiphy *wiphy,
if (params->seq && params->seq_len != IEEE80211_GCMP_PN_LEN) {
wil_err(wil,
- "Wrong PN len %d, %s(%pM %s[%d] PN %*phN)\n",
- params->seq_len, __func__, mac_addr,
+ "Wrong PN len %d, %pM %s[%d] PN %*phN\n",
+ params->seq_len, mac_addr,
key_usage_str[key_usage], key_index,
params->seq_len, params->seq);
return -EINVAL;
@@ -967,11 +963,11 @@ static int wil_cfg80211_del_key(struct wiphy *wiphy,
struct wil_sta_info *cs = wil_find_sta_by_key_usage(wil, key_usage,
mac_addr);
- wil_dbg_misc(wil, "%s(%pM %s[%d])\n", __func__, mac_addr,
+ wil_dbg_misc(wil, "del_key: %pM %s[%d]\n", mac_addr,
key_usage_str[key_usage], key_index);
if (IS_ERR(cs))
- wil_info(wil, "Not connected, %s(%pM %s[%d])\n", __func__,
+ wil_info(wil, "Not connected, %pM %s[%d]\n",
mac_addr, key_usage_str[key_usage], key_index);
if (!IS_ERR_OR_NULL(cs))
@@ -988,7 +984,7 @@ static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s: entered\n", __func__);
+ wil_dbg_misc(wil, "set_default_key: entered\n");
return 0;
}
@@ -1001,8 +997,9 @@ static int wil_remain_on_channel(struct wiphy *wiphy,
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
int rc;
- wil_dbg_misc(wil, "%s() center_freq=%d, duration=%d iftype=%d\n",
- __func__, chan->center_freq, duration, wdev->iftype);
+ wil_dbg_misc(wil,
+ "remain_on_channel: center_freq=%d, duration=%d iftype=%d\n",
+ chan->center_freq, duration, wdev->iftype);
rc = wil_p2p_listen(wil, wdev, duration, chan, cookie);
return rc;
@@ -1014,7 +1011,7 @@ static int wil_cancel_remain_on_channel(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "cancel_remain_on_channel\n");
return wil_p2p_cancel_listen(wil, cookie);
}
@@ -1170,9 +1167,9 @@ static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
if (pbss)
wmi_nettype = WMI_NETTYPE_P2P;
- wil_dbg_misc(wil, "%s: is_go=%d\n", __func__, is_go);
+ wil_dbg_misc(wil, "start_ap: is_go=%d\n", is_go);
if (is_go && !pbss) {
- wil_err(wil, "%s: P2P GO must be in PBSS\n", __func__);
+ wil_err(wil, "P2P GO must be in PBSS\n");
return -ENOTSUPP;
}
@@ -1227,7 +1224,7 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
int rc;
u32 privacy = 0;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "change_beacon\n");
wil_print_bcon_data(bcon);
if (bcon->tail &&
@@ -1266,7 +1263,7 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
struct cfg80211_crypto_settings *crypto = &info->crypto;
u8 hidden_ssid;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "start_ap\n");
if (!channel) {
wil_err(wil, "AP: No channel???\n");
@@ -1317,7 +1314,7 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "stop_ap\n");
netif_carrier_off(ndev);
wil_set_recovery_state(wil, fw_recovery_idle);
@@ -1361,7 +1358,7 @@ static int wil_cfg80211_del_station(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s(%pM, reason=%d)\n", __func__, params->mac,
+ wil_dbg_misc(wil, "del_station: %pM, reason=%d\n", params->mac,
params->reason_code);
mutex_lock(&wil->mutex);
@@ -1466,7 +1463,7 @@ void wil_probe_client_flush(struct wil6210_priv *wil)
{
struct wil_probe_client_req *req, *t;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "probe_client_flush\n");
mutex_lock(&wil->probe_client_mutex);
@@ -1486,7 +1483,7 @@ static int wil_cfg80211_probe_client(struct wiphy *wiphy,
struct wil_probe_client_req *req;
int cid = wil_find_cid(wil, peer);
- wil_dbg_misc(wil, "%s(%pM => CID %d)\n", __func__, peer, cid);
+ wil_dbg_misc(wil, "probe_client: %pM => CID %d\n", peer, cid);
if (cid < 0)
return -ENOLINK;
@@ -1514,7 +1511,7 @@ static int wil_cfg80211_change_bss(struct wiphy *wiphy,
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
if (params->ap_isolate >= 0) {
- wil_dbg_misc(wil, "%s(ap_isolate %d => %d)\n", __func__,
+ wil_dbg_misc(wil, "change_bss: ap_isolate %d => %d\n",
wil->ap_isolate, params->ap_isolate);
wil->ap_isolate = params->ap_isolate;
}
@@ -1527,7 +1524,7 @@ static int wil_cfg80211_start_p2p_device(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- wil_dbg_misc(wil, "%s: entered\n", __func__);
+ wil_dbg_misc(wil, "start_p2p_device: entered\n");
wil->p2p.p2p_dev_started = 1;
return 0;
}
@@ -1541,7 +1538,7 @@ static void wil_cfg80211_stop_p2p_device(struct wiphy *wiphy,
if (!p2p->p2p_dev_started)
return;
- wil_dbg_misc(wil, "%s: entered\n", __func__);
+ wil_dbg_misc(wil, "stop_p2p_device: entered\n");
mutex_lock(&wil->mutex);
mutex_lock(&wil->p2p_wdev_mutex);
wil_p2p_stop_radio_operations(wil);
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index e5a8382..db6527a 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -813,7 +813,7 @@ static ssize_t wil_write_file_txmgmt(struct file *file, const char __user *buf,
rc = wil_cfg80211_mgmt_tx(wiphy, wdev, ¶ms, NULL);
kfree(frame);
- wil_info(wil, "%s() -> %d\n", __func__, rc);
+ wil_info(wil, "-> %d\n", rc);
return len;
}
@@ -855,7 +855,7 @@ static ssize_t wil_write_file_wmi(struct file *file, const char __user *buf,
rc1 = wmi_send(wil, cmdid, cmd, cmdlen);
kfree(wmi);
- wil_info(wil, "%s(0x%04x[%d]) -> %d\n", __func__, cmdid, cmdlen, rc1);
+ wil_info(wil, "0x%04x[%d] -> %d\n", cmdid, cmdlen, rc1);
return rc;
}
diff --git a/drivers/net/wireless/ath/wil6210/ethtool.c b/drivers/net/wireless/ath/wil6210/ethtool.c
index 7053b62..adcfef4 100644
--- a/drivers/net/wireless/ath/wil6210/ethtool.c
+++ b/drivers/net/wireless/ath/wil6210/ethtool.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -27,7 +27,7 @@ static int wil_ethtoolops_begin(struct net_device *ndev)
mutex_lock(&wil->mutex);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "ethtoolops_begin\n");
return 0;
}
@@ -36,7 +36,7 @@ static void wil_ethtoolops_complete(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "ethtoolops_complete\n");
mutex_unlock(&wil->mutex);
}
@@ -48,7 +48,7 @@ static int wil_ethtoolops_get_coalesce(struct net_device *ndev,
u32 tx_itr_en, tx_itr_val = 0;
u32 rx_itr_en, rx_itr_val = 0;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "ethtoolops_get_coalesce\n");
tx_itr_en = wil_r(wil, RGF_DMA_ITR_TX_CNT_CTL);
if (tx_itr_en & BIT_DMA_ITR_TX_CNT_CTL_EN)
@@ -68,7 +68,7 @@ static int wil_ethtoolops_set_coalesce(struct net_device *ndev,
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
- wil_dbg_misc(wil, "%s(rx %d usec, tx %d usec)\n", __func__,
+ wil_dbg_misc(wil, "ethtoolops_set_coalesce: rx %d usec, tx %d usec\n",
cp->rx_coalesce_usecs, cp->tx_coalesce_usecs);
if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR) {
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 64046e0..cab1e5c 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -94,7 +94,7 @@ static void wil6210_mask_irq_rx(struct wil6210_priv *wil)
static void wil6210_mask_irq_misc(struct wil6210_priv *wil, bool mask_halp)
{
- wil_dbg_irq(wil, "%s: mask_halp(%s)\n", __func__,
+ wil_dbg_irq(wil, "mask_irq_misc: mask_halp(%s)\n",
mask_halp ? "true" : "false");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMS),
@@ -103,7 +103,7 @@ static void wil6210_mask_irq_misc(struct wil6210_priv *wil, bool mask_halp)
void wil6210_mask_halp(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "mask_halp\n");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMS),
BIT_DMA_EP_MISC_ICR_HALP);
@@ -111,7 +111,7 @@ void wil6210_mask_halp(struct wil6210_priv *wil)
static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "mask_irq_pseudo\n");
wil_w(wil, RGF_DMA_PSEUDO_CAUSE_MASK_SW, WIL6210_IRQ_DISABLE);
@@ -134,7 +134,7 @@ void wil6210_unmask_irq_rx(struct wil6210_priv *wil)
static void wil6210_unmask_irq_misc(struct wil6210_priv *wil, bool unmask_halp)
{
- wil_dbg_irq(wil, "%s: unmask_halp(%s)\n", __func__,
+ wil_dbg_irq(wil, "unmask_irq_misc: unmask_halp(%s)\n",
unmask_halp ? "true" : "false");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMC),
@@ -143,7 +143,7 @@ static void wil6210_unmask_irq_misc(struct wil6210_priv *wil, bool unmask_halp)
static void wil6210_unmask_halp(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "unmask_halp\n");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, IMC),
BIT_DMA_EP_MISC_ICR_HALP);
@@ -151,7 +151,7 @@ static void wil6210_unmask_halp(struct wil6210_priv *wil)
static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "unmask_irq_pseudo\n");
set_bit(wil_status_irqen, wil->status);
@@ -160,7 +160,7 @@ static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
void wil_mask_irq(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "mask_irq\n");
wil6210_mask_irq_tx(wil);
wil6210_mask_irq_rx(wil);
@@ -170,7 +170,7 @@ void wil_mask_irq(struct wil6210_priv *wil)
void wil_unmask_irq(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "unmask_irq\n");
wil_w(wil, RGF_DMA_EP_RX_ICR + offsetof(struct RGF_ICR, ICC),
WIL_ICR_ICC_VALUE);
@@ -187,7 +187,7 @@ void wil_unmask_irq(struct wil6210_priv *wil)
void wil_configure_interrupt_moderation(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "configure_interrupt_moderation\n");
/* disable interrupt moderation for monitor
* to get better timestamp precision
@@ -400,7 +400,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
}
if (isr & BIT_DMA_EP_MISC_ICR_HALP) {
- wil_dbg_irq(wil, "%s: HALP IRQ invoked\n", __func__);
+ wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
wil6210_mask_halp(wil);
isr &= ~BIT_DMA_EP_MISC_ICR_HALP;
complete(&wil->halp.comp);
@@ -599,7 +599,7 @@ void wil6210_clear_irq(struct wil6210_priv *wil)
void wil6210_set_halp(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "set_halp\n");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICS),
BIT_DMA_EP_MISC_ICR_HALP);
@@ -607,7 +607,7 @@ void wil6210_set_halp(struct wil6210_priv *wil)
void wil6210_clear_halp(struct wil6210_priv *wil)
{
- wil_dbg_irq(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "clear_halp\n");
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICR),
BIT_DMA_EP_MISC_ICR_HALP);
@@ -618,7 +618,7 @@ int wil6210_init_irq(struct wil6210_priv *wil, int irq, bool use_msi)
{
int rc;
- wil_dbg_misc(wil, "%s(%s)\n", __func__, use_msi ? "MSI" : "INTx");
+ wil_dbg_misc(wil, "init_irq: %s\n", use_msi ? "MSI" : "INTx");
rc = request_threaded_irq(irq, wil6210_hardirq,
wil6210_thread_irq,
@@ -629,7 +629,7 @@ int wil6210_init_irq(struct wil6210_priv *wil, int irq, bool use_msi)
void wil6210_fini_irq(struct wil6210_priv *wil, int irq)
{
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "fini_irq:\n");
wil_mask_irq(wil);
free_irq(irq, wil);
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 3580c6d..9b8fa6a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -172,8 +172,8 @@ static void wil_disconnect_cid(struct wil6210_priv *wil, int cid,
struct wil_sta_info *sta = &wil->sta[cid];
might_sleep();
- wil_dbg_misc(wil, "%s(CID %d, status %d)\n", __func__, cid,
- sta->status);
+ wil_dbg_misc(wil, "disconnect_cid: CID %d, status %d\n",
+ cid, sta->status);
/* inform upper/lower layers */
if (sta->status != wil_sta_unused) {
if (!from_event) {
@@ -241,7 +241,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
return;
might_sleep();
- wil_info(wil, "%s(bssid=%pM, reason=%d, ev%s)\n", __func__, bssid,
+ wil_info(wil, "bssid=%pM, reason=%d, ev%s\n", bssid,
reason_code, from_event ? "+" : "-");
/* Cases are:
@@ -351,7 +351,7 @@ static int wil_wait_for_recovery(struct wil6210_priv *wil)
void wil_set_recovery_state(struct wil6210_priv *wil, int state)
{
- wil_dbg_misc(wil, "%s(%d -> %d)\n", __func__,
+ wil_dbg_misc(wil, "set_recovery_state: %d -> %d\n",
wil->recovery_state, state);
wil->recovery_state = state;
@@ -493,7 +493,7 @@ int wil_priv_init(struct wil6210_priv *wil)
{
uint i;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "priv_init\n");
memset(wil->sta, 0, sizeof(wil->sta));
for (i = 0; i < WIL6210_MAX_CID; i++)
@@ -568,7 +568,7 @@ int wil_priv_init(struct wil6210_priv *wil)
void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
u16 reason_code, bool from_event)
{
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "disconnect\n");
del_timer_sync(&wil->connect_timer);
_wil6210_disconnect(wil, bssid, reason_code, from_event);
@@ -576,7 +576,7 @@ void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
void wil_priv_deinit(struct wil6210_priv *wil)
{
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "priv_deinit\n");
wil_set_recovery_state(wil, fw_recovery_idle);
del_timer_sync(&wil->scan_timer);
@@ -609,7 +609,7 @@ static inline void wil_release_cpu(struct wil6210_priv *wil)
static void wil_set_oob_mode(struct wil6210_priv *wil, bool enable)
{
- wil_info(wil, "%s: enable=%d\n", __func__, enable);
+ wil_info(wil, "enable=%d\n", enable);
if (enable)
wil_s(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE);
else
@@ -865,7 +865,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
{
int rc;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "reset\n");
WARN_ON(!mutex_is_locked(&wil->mutex));
WARN_ON(test_bit(wil_status_napi_en, wil->status));
@@ -888,9 +888,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
rc = wil->platform_ops.notify(wil->platform_handle,
WIL_PLATFORM_EVT_PRE_RESET);
if (rc)
- wil_err(wil,
- "%s: PRE_RESET platform notify failed, rc %d\n",
- __func__, rc);
+ wil_err(wil, "PRE_RESET platform notify failed, rc %d\n",
+ rc);
}
set_bit(wil_status_resetting, wil->status);
@@ -980,8 +979,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
/* check FW is responsive */
rc = wmi_echo(wil);
if (rc) {
- wil_err(wil, "%s: wmi_echo failed, rc %d\n",
- __func__, rc);
+ wil_err(wil, "wmi_echo failed, rc %d\n", rc);
return rc;
}
@@ -991,9 +989,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
rc = wil->platform_ops.notify(wil->platform_handle,
WIL_PLATFORM_EVT_FW_RDY);
if (rc) {
- wil_err(wil,
- "%s: FW_RDY notify failed, rc %d\n",
- __func__, rc);
+ wil_err(wil, "FW_RDY notify failed, rc %d\n",
+ rc);
rc = 0;
}
}
@@ -1077,7 +1074,7 @@ int wil_up(struct wil6210_priv *wil)
{
int rc;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "up\n");
mutex_lock(&wil->mutex);
rc = __wil_up(wil);
@@ -1117,7 +1114,7 @@ int wil_down(struct wil6210_priv *wil)
{
int rc;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "down\n");
wil_set_recovery_state(wil, fw_recovery_idle);
mutex_lock(&wil->mutex);
@@ -1150,25 +1147,24 @@ void wil_halp_vote(struct wil6210_priv *wil)
mutex_lock(&wil->halp.lock);
- wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+ wil_dbg_irq(wil, "halp_vote: start, HALP ref_cnt (%d)\n",
wil->halp.ref_cnt);
if (++wil->halp.ref_cnt == 1) {
wil6210_set_halp(wil);
rc = wait_for_completion_timeout(&wil->halp.comp, to_jiffies);
if (!rc) {
- wil_err(wil, "%s: HALP vote timed out\n", __func__);
+ wil_err(wil, "HALP vote timed out\n");
/* Mask HALP as done in case the interrupt is raised */
wil6210_mask_halp(wil);
} else {
wil_dbg_irq(wil,
- "%s: HALP vote completed after %d ms\n",
- __func__,
+ "halp_vote: HALP vote completed after %d ms\n",
jiffies_to_msecs(to_jiffies - rc));
}
}
- wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+ wil_dbg_irq(wil, "halp_vote: end, HALP ref_cnt (%d)\n",
wil->halp.ref_cnt);
mutex_unlock(&wil->halp.lock);
@@ -1180,15 +1176,15 @@ void wil_halp_unvote(struct wil6210_priv *wil)
mutex_lock(&wil->halp.lock);
- wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+ wil_dbg_irq(wil, "halp_unvote: start, HALP ref_cnt (%d)\n",
wil->halp.ref_cnt);
if (--wil->halp.ref_cnt == 0) {
wil6210_clear_halp(wil);
- wil_dbg_irq(wil, "%s: HALP unvote\n", __func__);
+ wil_dbg_irq(wil, "HALP unvote\n");
}
- wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+ wil_dbg_irq(wil, "halp_unvote:end, HALP ref_cnt (%d)\n",
wil->halp.ref_cnt);
mutex_unlock(&wil->halp.lock);
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 6676001..d5df744 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -22,10 +22,10 @@ static int wil_open(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "open\n");
if (debug_fw) {
- wil_err(wil, "%s() while in debug_fw mode\n", __func__);
+ wil_err(wil, "while in debug_fw mode\n");
return -EINVAL;
}
@@ -36,7 +36,7 @@ static int wil_stop(struct net_device *ndev)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "stop\n");
return wil_down(wil);
}
@@ -132,7 +132,7 @@ void *wil_if_alloc(struct device *dev)
wil->wdev = wdev;
wil->radio_wdev = wdev;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "if_alloc\n");
rc = wil_priv_init(wil);
if (rc) {
@@ -179,7 +179,7 @@ void wil_if_free(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "if_free\n");
if (!ndev)
return;
@@ -234,7 +234,7 @@ void wil_if_remove(struct wil6210_priv *wil)
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil_to_wdev(wil);
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "if_remove\n");
unregister_netdev(ndev);
wiphy_unregister(wdev->wiphy);
diff --git a/drivers/net/wireless/ath/wil6210/p2p.c b/drivers/net/wireless/ath/wil6210/p2p.c
index fbae995..7924847 100644
--- a/drivers/net/wireless/ath/wil6210/p2p.c
+++ b/drivers/net/wireless/ath/wil6210/p2p.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -69,7 +69,7 @@ void wil_p2p_discovery_timer_fn(ulong x)
{
struct wil6210_priv *wil = (void *)x;
- wil_dbg_misc(wil, "%s\n", __func__);
+ wil_dbg_misc(wil, "p2p_discovery_timer_fn\n");
schedule_work(&wil->p2p.discovery_expired_work);
}
@@ -80,27 +80,25 @@ int wil_p2p_search(struct wil6210_priv *wil,
int rc;
struct wil_p2p_info *p2p = &wil->p2p;
- wil_dbg_misc(wil, "%s: channel %d\n",
- __func__, P2P_DMG_SOCIAL_CHANNEL);
+ wil_dbg_misc(wil, "p2p_search: channel %d\n", P2P_DMG_SOCIAL_CHANNEL);
lockdep_assert_held(&wil->mutex);
if (p2p->discovery_started) {
- wil_err(wil, "%s: search failed. discovery already ongoing\n",
- __func__);
+ wil_err(wil, "search failed. discovery already ongoing\n");
rc = -EBUSY;
goto out;
}
rc = wmi_p2p_cfg(wil, P2P_DMG_SOCIAL_CHANNEL, P2P_DEFAULT_BI);
if (rc) {
- wil_err(wil, "%s: wmi_p2p_cfg failed\n", __func__);
+ wil_err(wil, "wmi_p2p_cfg failed\n");
goto out;
}
rc = wmi_set_ssid(wil, strlen(P2P_WILDCARD_SSID), P2P_WILDCARD_SSID);
if (rc) {
- wil_err(wil, "%s: wmi_set_ssid failed\n", __func__);
+ wil_err(wil, "wmi_set_ssid failed\n");
goto out_stop;
}
@@ -108,8 +106,7 @@ int wil_p2p_search(struct wil6210_priv *wil,
rc = wmi_set_ie(wil, WMI_FRAME_PROBE_REQ,
request->ie_len, request->ie);
if (rc) {
- wil_err(wil, "%s: wmi_set_ie(WMI_FRAME_PROBE_REQ) failed\n",
- __func__);
+ wil_err(wil, "wmi_set_ie(WMI_FRAME_PROBE_REQ) failed\n");
goto out_stop;
}
@@ -119,14 +116,13 @@ int wil_p2p_search(struct wil6210_priv *wil,
rc = wmi_set_ie(wil, WMI_FRAME_PROBE_RESP,
request->ie_len, request->ie);
if (rc) {
- wil_err(wil, "%s: wmi_set_ie(WMI_FRAME_PROBE_RESP) failed\n",
- __func__);
+ wil_err(wil, "wmi_set_ie(WMI_FRAME_PROBE_RESP) failed\n");
goto out_stop;
}
rc = wmi_start_search(wil);
if (rc) {
- wil_err(wil, "%s: wmi_start_search failed\n", __func__);
+ wil_err(wil, "wmi_start_search failed\n");
goto out_stop;
}
@@ -153,12 +149,12 @@ int wil_p2p_listen(struct wil6210_priv *wil, struct wireless_dev *wdev,
if (!chan)
return -EINVAL;
- wil_dbg_misc(wil, "%s: duration %d\n", __func__, duration);
+ wil_dbg_misc(wil, "p2p_listen: duration %d\n", duration);
mutex_lock(&wil->mutex);
if (p2p->discovery_started) {
- wil_err(wil, "%s: discovery already ongoing\n", __func__);
+ wil_err(wil, "discovery already ongoing\n");
rc = -EBUSY;
goto out;
}
@@ -220,8 +216,8 @@ int wil_p2p_cancel_listen(struct wil6210_priv *wil, u64 cookie)
mutex_lock(&wil->mutex);
if (cookie != p2p->cookie) {
- wil_info(wil, "%s: Cookie mismatch: 0x%016llx vs. 0x%016llx\n",
- __func__, p2p->cookie, cookie);
+ wil_info(wil, "Cookie mismatch: 0x%016llx vs. 0x%016llx\n",
+ p2p->cookie, cookie);
mutex_unlock(&wil->mutex);
return -ENOENT;
}
@@ -231,7 +227,7 @@ int wil_p2p_cancel_listen(struct wil6210_priv *wil, u64 cookie)
mutex_unlock(&wil->mutex);
if (!started) {
- wil_err(wil, "%s: listen not started\n", __func__);
+ wil_err(wil, "listen not started\n");
return -ENOENT;
}
@@ -253,7 +249,7 @@ void wil_p2p_listen_expired(struct work_struct *work)
struct wil6210_priv, p2p);
u8 started;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "p2p_listen_expired\n");
mutex_lock(&wil->mutex);
started = wil_p2p_stop_discovery(wil);
@@ -279,7 +275,7 @@ void wil_p2p_search_expired(struct work_struct *work)
struct wil6210_priv, p2p);
u8 started;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "p2p_search_expired\n");
mutex_lock(&wil->mutex);
started = wil_p2p_stop_discovery(wil);
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index eab74c4..cd57d3e 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -100,7 +100,7 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
int msi_only = pdev->msi_enabled;
bool _use_msi = use_msi;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "if_pcie_enable\n");
pdev->msi_enabled = 0;
@@ -145,7 +145,7 @@ static int wil_if_pcie_disable(struct wil6210_priv *wil)
{
struct pci_dev *pdev = wil->pdev;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "if_pcie_disable\n");
pci_clear_master(pdev);
/* disable and release IRQ */
@@ -310,7 +310,7 @@ static void wil_pcie_remove(struct pci_dev *pdev)
struct wil6210_priv *wil = pci_get_drvdata(pdev);
void __iomem *csr = wil->csr;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "pcie_remove\n");
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
@@ -349,8 +349,7 @@ static int wil6210_suspend(struct device *dev, bool is_runtime)
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
- wil_dbg_pm(wil, "%s(%s)\n", __func__,
- is_runtime ? "runtime" : "system");
+ wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system");
rc = wil_can_suspend(wil, is_runtime);
if (rc)
@@ -376,8 +375,7 @@ static int wil6210_resume(struct device *dev, bool is_runtime)
struct pci_dev *pdev = to_pci_dev(dev);
struct wil6210_priv *wil = pci_get_drvdata(pdev);
- wil_dbg_pm(wil, "%s(%s)\n", __func__,
- is_runtime ? "runtime" : "system");
+ wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system");
/* allow master */
pci_set_master(pdev);
@@ -397,7 +395,7 @@ static int wil6210_pm_notify(struct notifier_block *notify_block,
int rc = 0;
enum wil_platform_event evt;
- wil_dbg_pm(wil, "%s: mode (%ld)\n", __func__, mode);
+ wil_dbg_pm(wil, "pm_notify: mode (%ld)\n", mode);
switch (mode) {
case PM_HIBERNATION_PREPARE:
diff --git a/drivers/net/wireless/ath/wil6210/pm.c b/drivers/net/wireless/ath/wil6210/pm.c
index 11ee24d..a0acb2d 100644
--- a/drivers/net/wireless/ath/wil6210/pm.c
+++ b/drivers/net/wireless/ath/wil6210/pm.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014,2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -21,8 +21,7 @@ int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime)
int rc = 0;
struct wireless_dev *wdev = wil->wdev;
- wil_dbg_pm(wil, "%s(%s)\n", __func__,
- is_runtime ? "runtime" : "system");
+ wil_dbg_pm(wil, "can_suspend: %s\n", is_runtime ? "runtime" : "system");
if (!netif_running(wil_to_ndev(wil))) {
/* can always sleep when down */
@@ -59,7 +58,7 @@ int wil_can_suspend(struct wil6210_priv *wil, bool is_runtime)
}
out:
- wil_dbg_pm(wil, "%s(%s) => %s (%d)\n", __func__,
+ wil_dbg_pm(wil, "can_suspend: %s => %s (%d)\n",
is_runtime ? "runtime" : "system", rc ? "No" : "Yes", rc);
return rc;
@@ -70,8 +69,7 @@ int wil_suspend(struct wil6210_priv *wil, bool is_runtime)
int rc = 0;
struct net_device *ndev = wil_to_ndev(wil);
- wil_dbg_pm(wil, "%s(%s)\n", __func__,
- is_runtime ? "runtime" : "system");
+ wil_dbg_pm(wil, "suspend: %s\n", is_runtime ? "runtime" : "system");
/* if netif up, hardware is alive, shut it down */
if (ndev->flags & IFF_UP) {
@@ -86,7 +84,7 @@ int wil_suspend(struct wil6210_priv *wil, bool is_runtime)
rc = wil->platform_ops.suspend(wil->platform_handle);
out:
- wil_dbg_pm(wil, "%s(%s) => %d\n", __func__,
+ wil_dbg_pm(wil, "suspend: %s => %d\n",
is_runtime ? "runtime" : "system", rc);
return rc;
}
@@ -96,8 +94,7 @@ int wil_resume(struct wil6210_priv *wil, bool is_runtime)
int rc = 0;
struct net_device *ndev = wil_to_ndev(wil);
- wil_dbg_pm(wil, "%s(%s)\n", __func__,
- is_runtime ? "runtime" : "system");
+ wil_dbg_pm(wil, "resume: %s\n", is_runtime ? "runtime" : "system");
if (wil->platform_ops.resume) {
rc = wil->platform_ops.resume(wil->platform_handle);
@@ -115,7 +112,7 @@ int wil_resume(struct wil6210_priv *wil, bool is_runtime)
rc = wil_up(wil);
out:
- wil_dbg_pm(wil, "%s(%s) => %d\n", __func__,
+ wil_dbg_pm(wil, "resume: %s => %d\n",
is_runtime ? "runtime" : "system", rc);
return rc;
}
diff --git a/drivers/net/wireless/ath/wil6210/pmc.c b/drivers/net/wireless/ath/wil6210/pmc.c
index b9faae0..3ff4f4c 100644
--- a/drivers/net/wireless/ath/wil6210/pmc.c
+++ b/drivers/net/wireless/ath/wil6210/pmc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2015,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -60,7 +60,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
if (wil_is_pmc_allocated(pmc)) {
/* sanity check */
- wil_err(wil, "%s: ERROR pmc is already allocated\n", __func__);
+ wil_err(wil, "ERROR pmc is already allocated\n");
goto no_release_err;
}
if ((num_descriptors <= 0) || (descriptor_size <= 0)) {
@@ -90,21 +90,20 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
pmc->num_descriptors = num_descriptors;
pmc->descriptor_size = descriptor_size;
- wil_dbg_misc(wil, "%s: %d descriptors x %d bytes each\n",
- __func__, num_descriptors, descriptor_size);
+ wil_dbg_misc(wil, "pmc_alloc: %d descriptors x %d bytes each\n",
+ num_descriptors, descriptor_size);
/* allocate descriptors info list in pmc context*/
pmc->descriptors = kcalloc(num_descriptors,
sizeof(struct desc_alloc_info),
GFP_KERNEL);
if (!pmc->descriptors) {
- wil_err(wil, "%s: ERROR allocating pmc skb list\n", __func__);
+ wil_err(wil, "ERROR allocating pmc skb list\n");
goto no_release_err;
}
- wil_dbg_misc(wil,
- "%s: allocated descriptors info list %p\n",
- __func__, pmc->descriptors);
+ wil_dbg_misc(wil, "pmc_alloc: allocated descriptors info list %p\n",
+ pmc->descriptors);
/* Allocate pring buffer and descriptors.
* vring->va should be aligned on its size rounded up to power of 2
@@ -116,15 +115,14 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
GFP_KERNEL);
wil_dbg_misc(wil,
- "%s: allocated pring %p => %pad. %zd x %d = total %zd bytes\n",
- __func__,
+ "pmc_alloc: allocated pring %p => %pad. %zd x %d = total %zd bytes\n",
pmc->pring_va, &pmc->pring_pa,
sizeof(struct vring_tx_desc),
num_descriptors,
sizeof(struct vring_tx_desc) * num_descriptors);
if (!pmc->pring_va) {
- wil_err(wil, "%s: ERROR allocating pmc pring\n", __func__);
+ wil_err(wil, "ERROR allocating pmc pring\n");
goto release_pmc_skb_list;
}
@@ -143,9 +141,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
GFP_KERNEL);
if (unlikely(!pmc->descriptors[i].va)) {
- wil_err(wil,
- "%s: ERROR allocating pmc descriptor %d",
- __func__, i);
+ wil_err(wil, "ERROR allocating pmc descriptor %d", i);
goto release_pmc_skbs;
}
@@ -165,21 +161,21 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
*_d = *d;
}
- wil_dbg_misc(wil, "%s: allocated successfully\n", __func__);
+ wil_dbg_misc(wil, "pmc_alloc: allocated successfully\n");
pmc_cmd.op = WMI_PMC_ALLOCATE;
pmc_cmd.ring_size = cpu_to_le16(pmc->num_descriptors);
pmc_cmd.mem_base = cpu_to_le64(pmc->pring_pa);
- wil_dbg_misc(wil, "%s: send WMI_PMC_CMD with ALLOCATE op\n", __func__);
+ wil_dbg_misc(wil, "pmc_alloc: send WMI_PMC_CMD with ALLOCATE op\n");
pmc->last_cmd_status = wmi_send(wil,
WMI_PMC_CMDID,
&pmc_cmd,
sizeof(pmc_cmd));
if (pmc->last_cmd_status) {
wil_err(wil,
- "%s: WMI_PMC_CMD with ALLOCATE op failed with status %d",
- __func__, pmc->last_cmd_status);
+ "WMI_PMC_CMD with ALLOCATE op failed with status %d",
+ pmc->last_cmd_status);
goto release_pmc_skbs;
}
@@ -188,7 +184,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
return;
release_pmc_skbs:
- wil_err(wil, "%s: exit on error: Releasing skbs...\n", __func__);
+ wil_err(wil, "exit on error: Releasing skbs...\n");
for (i = 0; pmc->descriptors[i].va && i < num_descriptors; i++) {
dma_free_coherent(dev,
descriptor_size,
@@ -197,7 +193,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
pmc->descriptors[i].va = NULL;
}
- wil_err(wil, "%s: exit on error: Releasing pring...\n", __func__);
+ wil_err(wil, "exit on error: Releasing pring...\n");
dma_free_coherent(dev,
sizeof(struct vring_tx_desc) * num_descriptors,
@@ -207,8 +203,7 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
pmc->pring_va = NULL;
release_pmc_skb_list:
- wil_err(wil, "%s: exit on error: Releasing descriptors info list...\n",
- __func__);
+ wil_err(wil, "exit on error: Releasing descriptors info list...\n");
kfree(pmc->descriptors);
pmc->descriptors = NULL;
@@ -232,24 +227,23 @@ void wil_pmc_free(struct wil6210_priv *wil, int send_pmc_cmd)
pmc->last_cmd_status = 0;
if (!wil_is_pmc_allocated(pmc)) {
- wil_dbg_misc(wil, "%s: Error, can't free - not allocated\n",
- __func__);
+ wil_dbg_misc(wil,
+ "pmc_free: Error, can't free - not allocated\n");
pmc->last_cmd_status = -EPERM;
mutex_unlock(&pmc->lock);
return;
}
if (send_pmc_cmd) {
- wil_dbg_misc(wil, "%s: send WMI_PMC_CMD with RELEASE op\n",
- __func__);
+ wil_dbg_misc(wil, "send WMI_PMC_CMD with RELEASE op\n");
pmc_cmd.op = WMI_PMC_RELEASE;
pmc->last_cmd_status =
wmi_send(wil, WMI_PMC_CMDID, &pmc_cmd,
sizeof(pmc_cmd));
if (pmc->last_cmd_status) {
wil_err(wil,
- "%s WMI_PMC_CMD with RELEASE op failed, status %d",
- __func__, pmc->last_cmd_status);
+ "WMI_PMC_CMD with RELEASE op failed, status %d",
+ pmc->last_cmd_status);
/* There's nothing we can do with this error.
* Normally, it should never occur.
* Continue to freeing all memory allocated for pmc.
@@ -261,8 +255,8 @@ void wil_pmc_free(struct wil6210_priv *wil, int send_pmc_cmd)
size_t buf_size = sizeof(struct vring_tx_desc) *
pmc->num_descriptors;
- wil_dbg_misc(wil, "%s: free pring va %p\n",
- __func__, pmc->pring_va);
+ wil_dbg_misc(wil, "pmc_free: free pring va %p\n",
+ pmc->pring_va);
dma_free_coherent(dev, buf_size, pmc->pring_va, pmc->pring_pa);
pmc->pring_va = NULL;
@@ -281,11 +275,11 @@ void wil_pmc_free(struct wil6210_priv *wil, int send_pmc_cmd)
pmc->descriptors[i].pa);
pmc->descriptors[i].va = NULL;
}
- wil_dbg_misc(wil, "%s: free descriptor info %d/%d\n",
- __func__, i, pmc->num_descriptors);
+ wil_dbg_misc(wil, "pmc_free: free descriptor info %d/%d\n", i,
+ pmc->num_descriptors);
wil_dbg_misc(wil,
- "%s: free pmc descriptors info list %p\n",
- __func__, pmc->descriptors);
+ "pmc_free: free pmc descriptors info list %p\n",
+ pmc->descriptors);
kfree(pmc->descriptors);
pmc->descriptors = NULL;
} else {
@@ -301,7 +295,7 @@ void wil_pmc_free(struct wil6210_priv *wil, int send_pmc_cmd)
*/
int wil_pmc_last_cmd_status(struct wil6210_priv *wil)
{
- wil_dbg_misc(wil, "%s: status %d\n", __func__,
+ wil_dbg_misc(wil, "pmc_last_cmd_status: status %d\n",
wil->pmc.last_cmd_status);
return wil->pmc.last_cmd_status;
@@ -324,7 +318,7 @@ ssize_t wil_pmc_read(struct file *filp, char __user *buf, size_t count,
mutex_lock(&pmc->lock);
if (!wil_is_pmc_allocated(pmc)) {
- wil_err(wil, "%s: error, pmc is not allocated!\n", __func__);
+ wil_err(wil, "error, pmc is not allocated!\n");
pmc->last_cmd_status = -EPERM;
mutex_unlock(&pmc->lock);
return -EPERM;
@@ -333,8 +327,8 @@ ssize_t wil_pmc_read(struct file *filp, char __user *buf, size_t count,
pmc_size = pmc->descriptor_size * pmc->num_descriptors;
wil_dbg_misc(wil,
- "%s: size %u, pos %lld\n",
- __func__, (unsigned)count, *f_pos);
+ "pmc_read: size %u, pos %lld\n",
+ (u32)count, *f_pos);
pmc->last_cmd_status = 0;
@@ -343,15 +337,16 @@ ssize_t wil_pmc_read(struct file *filp, char __user *buf, size_t count,
offset = *f_pos - (idx * pmc->descriptor_size);
if (*f_pos >= pmc_size) {
- wil_dbg_misc(wil, "%s: reached end of pmc buf: %lld >= %u\n",
- __func__, *f_pos, (unsigned)pmc_size);
+ wil_dbg_misc(wil,
+ "pmc_read: reached end of pmc buf: %lld >= %u\n",
+ *f_pos, (u32)pmc_size);
pmc->last_cmd_status = -ERANGE;
goto out;
}
wil_dbg_misc(wil,
- "%s: read from pos %lld (descriptor %llu, offset %llu) %zu bytes\n",
- __func__, *f_pos, idx, offset, count);
+ "pmc_read: read from pos %lld (descriptor %llu, offset %llu) %zu bytes\n",
+ *f_pos, idx, offset, count);
/* if no errors, return the copied byte count */
retval = simple_read_from_buffer(buf,
diff --git a/drivers/net/wireless/ath/wil6210/rx_reorder.c b/drivers/net/wireless/ath/wil6210/rx_reorder.c
index 19ed127..7404b6f 100644
--- a/drivers/net/wireless/ath/wil6210/rx_reorder.c
+++ b/drivers/net/wireless/ath/wil6210/rx_reorder.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -349,8 +349,8 @@ int wil_addba_rx_request(struct wil6210_priv *wil, u8 cidxtid,
rc = wmi_addba_rx_resp(wil, cid, tid, dialog_token, status,
agg_amsdu, agg_wsize, agg_timeout);
if (rc || (status != WLAN_STATUS_SUCCESS)) {
- wil_err(wil, "%s: do not apply ba, rc(%d), status(%d)\n",
- __func__, rc, status);
+ wil_err(wil, "do not apply ba, rc(%d), status(%d)\n", rc,
+ status);
goto out;
}
@@ -387,7 +387,7 @@ int wil_addba_tx_request(struct wil6210_priv *wil, u8 ringid, u16 wsize)
txdata->addba_in_progress = true;
rc = wmi_addba(wil, ringid, agg_wsize, agg_timeout);
if (rc) {
- wil_err(wil, "%s: wmi_addba failed, rc (%d)", __func__, rc);
+ wil_err(wil, "wmi_addba failed, rc (%d)", rc);
txdata->addba_in_progress = false;
}
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index c1b4bb0..6e7dc8d 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -112,7 +112,7 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
size_t sz = vring->size * sizeof(vring->va[0]);
uint i;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "vring_alloc:\n");
BUILD_BUG_ON(sizeof(vring->va[0]) != 32);
@@ -745,7 +745,7 @@ void wil_rx_handle(struct wil6210_priv *wil, int *quota)
wil_err(wil, "Rx IRQ while Rx not yet initialized\n");
return;
}
- wil_dbg_txrx(wil, "%s()\n", __func__);
+ wil_dbg_txrx(wil, "rx_handle\n");
while ((*quota > 0) && (NULL != (skb = wil_vring_reap_rx(wil, v)))) {
(*quota)--;
@@ -768,7 +768,7 @@ int wil_rx_init(struct wil6210_priv *wil, u16 size)
struct vring *vring = &wil->vring_rx;
int rc;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "rx_init\n");
if (vring->va) {
wil_err(wil, "Rx ring already allocated\n");
@@ -799,7 +799,7 @@ void wil_rx_fini(struct wil6210_priv *wil)
{
struct vring *vring = &wil->vring_rx;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "rx_fini\n");
if (vring->va)
wil_vring_free(wil, vring, 0);
@@ -851,7 +851,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
struct vring *vring = &wil->vring_tx[id];
struct vring_tx_data *txdata = &wil->vring_tx_data[id];
- wil_dbg_misc(wil, "%s() max_mpdu_size %d\n", __func__,
+ wil_dbg_misc(wil, "vring_init_tx: max_mpdu_size %d\n",
cmd.vring_cfg.tx_sw_ring.max_mpdu_size);
lockdep_assert_held(&wil->mutex);
@@ -931,7 +931,7 @@ int wil_vring_init_bcast(struct wil6210_priv *wil, int id, int size)
struct vring *vring = &wil->vring_tx[id];
struct vring_tx_data *txdata = &wil->vring_tx_data[id];
- wil_dbg_misc(wil, "%s() max_mpdu_size %d\n", __func__,
+ wil_dbg_misc(wil, "vring_init_bcast: max_mpdu_size %d\n",
cmd.vring_cfg.tx_sw_ring.max_mpdu_size);
lockdep_assert_held(&wil->mutex);
@@ -993,7 +993,7 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
if (!vring->va)
return;
- wil_dbg_misc(wil, "%s() id=%d\n", __func__, id);
+ wil_dbg_misc(wil, "vring_fini_tx: id=%d\n", id);
spin_lock_bh(&txdata->lock);
txdata->dot1x_open = false;
@@ -1032,12 +1032,14 @@ static struct vring *wil_find_tx_ucast(struct wil6210_priv *wil,
struct vring *v = &wil->vring_tx[i];
struct vring_tx_data *txdata = &wil->vring_tx_data[i];
- wil_dbg_txrx(wil, "%s(%pM) -> [%d]\n",
- __func__, eth->h_dest, i);
+ wil_dbg_txrx(wil, "find_tx_ucast: (%pM) -> [%d]\n",
+ eth->h_dest, i);
if (v->va && txdata->enabled) {
return v;
} else {
- wil_dbg_txrx(wil, "vring[%d] not valid\n", i);
+ wil_dbg_txrx(wil,
+ "find_tx_ucast: vring[%d] not valid\n",
+ i);
return NULL;
}
}
@@ -1373,8 +1375,8 @@ static int __wil_tx_vring_tso(struct wil6210_priv *wil, struct vring *vring,
int gso_type;
int rc = -EINVAL;
- wil_dbg_txrx(wil, "%s() %d bytes to vring %d\n",
- __func__, skb->len, vring_index);
+ wil_dbg_txrx(wil, "tx_vring_tso: %d bytes to vring %d\n", skb->len,
+ vring_index);
if (unlikely(!txdata->enabled))
return -EINVAL;
@@ -1643,8 +1645,8 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
bool mcast = (vring_index == wil->bcast_vring);
uint len = skb_headlen(skb);
- wil_dbg_txrx(wil, "%s() %d bytes to vring %d\n",
- __func__, skb->len, vring_index);
+ wil_dbg_txrx(wil, "tx_vring: %d bytes to vring %d\n", skb->len,
+ vring_index);
if (unlikely(!txdata->enabled))
return -EINVAL;
@@ -1884,7 +1886,7 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
static bool pr_once_fw;
int rc;
- wil_dbg_txrx(wil, "%s()\n", __func__);
+ wil_dbg_txrx(wil, "start_xmit\n");
if (unlikely(!test_bit(wil_status_fwready, wil->status))) {
if (!pr_once_fw) {
wil_err(wil, "FW not ready\n");
@@ -1982,7 +1984,7 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
return 0;
}
- wil_dbg_txrx(wil, "%s(%d)\n", __func__, ringid);
+ wil_dbg_txrx(wil, "tx_complete: (%d)\n", ringid);
used_before_complete = wil_vring_used_tx(vring);
diff --git a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
index d051eea..e53cf0c 100644
--- a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
+++ b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2015,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -62,13 +62,13 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
u32 host_min, dump_size, offset, len;
if (wil_fw_get_crash_dump_bounds(wil, &dump_size, &host_min)) {
- wil_err(wil, "%s: fail to obtain crash dump size\n", __func__);
+ wil_err(wil, "fail to obtain crash dump size\n");
return -EINVAL;
}
if (dump_size > size) {
- wil_err(wil, "%s: not enough space for dump. Need %d have %d\n",
- __func__, dump_size, size);
+ wil_err(wil, "not enough space for dump. Need %d have %d\n",
+ dump_size, size);
return -EINVAL;
}
@@ -83,8 +83,9 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
len = map->to - map->from;
offset = map->host - host_min;
- wil_dbg_misc(wil, "%s() - dump %s, size %d, offset %d\n",
- __func__, fw_mapping[i].name, len, offset);
+ wil_dbg_misc(wil,
+ "fw_copy_crash_dump: - dump %s, size %d, offset %d\n",
+ fw_mapping[i].name, len, offset);
wil_memcpy_fromio_32((void * __force)(dest + offset),
(const void __iomem * __force)data, len);
@@ -99,7 +100,7 @@ void wil_fw_core_dump(struct wil6210_priv *wil)
u32 fw_dump_size;
if (wil_fw_get_crash_dump_bounds(wil, &fw_dump_size, NULL)) {
- wil_err(wil, "%s: fail to get fw dump size\n", __func__);
+ wil_err(wil, "fail to get fw dump size\n");
return;
}
@@ -115,6 +116,5 @@ void wil_fw_core_dump(struct wil6210_priv *wil)
* after 5 min
*/
dev_coredumpv(wil_to_dev(wil), fw_dump_data, fw_dump_size, GFP_KERNEL);
- wil_info(wil, "%s: fw core dumped, size %d bytes\n", __func__,
- fw_dump_size);
+ wil_info(wil, "fw core dumped, size %d bytes\n", fw_dump_size);
}
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 556acd3..0137ac5 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -539,8 +539,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
} else if ((wdev->iftype == NL80211_IFTYPE_AP) ||
(wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
if (wil->sta[evt->cid].status != wil_sta_unused) {
- wil_err(wil, "%s: AP: Invalid status %d for CID %d\n",
- __func__, wil->sta[evt->cid].status, evt->cid);
+ wil_err(wil, "AP: Invalid status %d for CID %d\n",
+ wil->sta[evt->cid].status, evt->cid);
mutex_unlock(&wil->mutex);
return;
}
@@ -553,22 +553,19 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
rc = wil_tx_init(wil, evt->cid);
if (rc) {
- wil_err(wil, "%s: config tx vring failed for CID %d, rc (%d)\n",
- __func__, evt->cid, rc);
+ wil_err(wil, "config tx vring failed for CID %d, rc (%d)\n",
+ evt->cid, rc);
wmi_disconnect_sta(wil, wil->sta[evt->cid].addr,
WLAN_REASON_UNSPECIFIED, false, false);
} else {
- wil_info(wil, "%s: successful connection to CID %d\n",
- __func__, evt->cid);
+ wil_info(wil, "successful connection to CID %d\n", evt->cid);
}
if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
(wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
if (rc) {
netif_carrier_off(ndev);
- wil_err(wil,
- "%s: cfg80211_connect_result with failure\n",
- __func__);
+ wil_err(wil, "cfg80211_connect_result with failure\n");
cfg80211_connect_result(ndev, evt->bssid, NULL, 0,
NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
@@ -601,8 +598,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
} else {
- wil_err(wil, "%s: unhandled iftype %d for CID %d\n",
- __func__, wdev->iftype, evt->cid);
+ wil_err(wil, "unhandled iftype %d for CID %d\n", wdev->iftype,
+ evt->cid);
goto out;
}
@@ -929,8 +926,8 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
offsetof(struct wil6210_mbox_ctl, rx.tail), r->tail);
if (immed_reply) {
- wil_dbg_wmi(wil, "%s: Complete WMI 0x%04x\n",
- __func__, wil->reply_id);
+ wil_dbg_wmi(wil, "recv_cmd: Complete WMI 0x%04x\n",
+ wil->reply_id);
kfree(evt);
num_immed_reply++;
complete(&wil->wmi_call);
@@ -944,7 +941,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
}
}
/* normally, 1 event per IRQ should be processed */
- wil_dbg_wmi(wil, "%s -> %d events queued, %d completed\n", __func__,
+ wil_dbg_wmi(wil, "recv_cmd: -> %d events queued, %d completed\n",
n - num_immed_reply, num_immed_reply);
}
@@ -1370,7 +1367,7 @@ int wmi_rxon(struct wil6210_priv *wil, bool on)
struct wmi_listen_started_event evt;
} __packed reply;
- wil_info(wil, "%s(%s)\n", __func__, on ? "on" : "off");
+ wil_info(wil, "(%s)\n", on ? "on" : "off");
if (on) {
rc = wmi_call(wil, WMI_START_LISTEN_CMDID, NULL, 0,
@@ -1490,7 +1487,7 @@ int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac,
struct wmi_disconnect_event evt;
} __packed reply;
- wil_dbg_wmi(wil, "%s(%pM, reason %d)\n", __func__, mac, reason);
+ wil_dbg_wmi(wil, "disconnect_sta: (%pM, reason %d)\n", mac, reason);
if (del_sta) {
ether_addr_copy(del_sta_cmd.dst_mac, mac);
@@ -1535,8 +1532,8 @@ int wmi_addba(struct wil6210_priv *wil, u8 ringid, u8 size, u16 timeout)
.amsdu = 0,
};
- wil_dbg_wmi(wil, "%s(ring %d size %d timeout %d)\n", __func__,
- ringid, size, timeout);
+ wil_dbg_wmi(wil, "addba: (ring %d size %d timeout %d)\n", ringid, size,
+ timeout);
return wmi_send(wil, WMI_VRING_BA_EN_CMDID, &cmd, sizeof(cmd));
}
@@ -1548,8 +1545,7 @@ int wmi_delba_tx(struct wil6210_priv *wil, u8 ringid, u16 reason)
.reason = cpu_to_le16(reason),
};
- wil_dbg_wmi(wil, "%s(ring %d reason %d)\n", __func__,
- ringid, reason);
+ wil_dbg_wmi(wil, "delba_tx: (ring %d reason %d)\n", ringid, reason);
return wmi_send(wil, WMI_VRING_BA_DIS_CMDID, &cmd, sizeof(cmd));
}
@@ -1561,8 +1557,8 @@ int wmi_delba_rx(struct wil6210_priv *wil, u8 cidxtid, u16 reason)
.reason = cpu_to_le16(reason),
};
- wil_dbg_wmi(wil, "%s(CID %d TID %d reason %d)\n", __func__,
- cidxtid & 0xf, (cidxtid >> 4) & 0xf, reason);
+ wil_dbg_wmi(wil, "delba_rx: (CID %d TID %d reason %d)\n", cidxtid & 0xf,
+ (cidxtid >> 4) & 0xf, reason);
return wmi_send(wil, WMI_RCP_DELBA_CMDID, &cmd, sizeof(cmd));
}
@@ -1736,7 +1732,7 @@ void wmi_event_flush(struct wil6210_priv *wil)
{
struct pending_wmi_event *evt, *t;
- wil_dbg_wmi(wil, "%s()\n", __func__);
+ wil_dbg_wmi(wil, "event_flush\n");
list_for_each_entry_safe(evt, t, &wil->pending_wmi_ev, list) {
list_del(&evt->list);
@@ -1777,8 +1773,8 @@ static void wmi_event_handle(struct wil6210_priv *wil,
WARN_ON(wil->reply_buf);
wmi_evt_call_handler(wil, id, evt_data,
len - sizeof(*wmi));
- wil_dbg_wmi(wil, "%s: Complete WMI 0x%04x\n",
- __func__, id);
+ wil_dbg_wmi(wil, "event_handle: Complete WMI 0x%04x\n",
+ id);
complete(&wil->wmi_call);
return;
}
@@ -1825,11 +1821,11 @@ void wmi_event_worker(struct work_struct *work)
struct pending_wmi_event *evt;
struct list_head *lh;
- wil_dbg_wmi(wil, "Start %s\n", __func__);
+ wil_dbg_wmi(wil, "event_worker: Start\n");
while ((lh = next_wmi_ev(wil)) != NULL) {
evt = list_entry(lh, struct pending_wmi_event, list);
wmi_event_handle(wil, &evt->event.hdr);
kfree(evt);
}
- wil_dbg_wmi(wil, "Finished %s\n", __func__);
+ wil_dbg_wmi(wil, "event_worker: Finished\n");
}
--
1.9.1
^ permalink raw reply related
* [PATCH v2 05/13] wil6210: support new WMI-only FW capability
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Dedy Lansky, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
WMI_ONLY FW is used for testing in production. It cannot be used for
scan/connect, etc.
In case FW reports this capability, driver will not allow interface up.
Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/netdev.c | 5 +++--
drivers/net/wireless/ath/wil6210/pcie_bus.c | 10 +++++++---
drivers/net/wireless/ath/wil6210/wmi.h | 1 +
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index d5df744..1843d98 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -24,8 +24,9 @@ static int wil_open(struct net_device *ndev)
wil_dbg_misc(wil, "open\n");
- if (debug_fw) {
- wil_err(wil, "while in debug_fw mode\n");
+ if (debug_fw ||
+ test_bit(WMI_FW_CAPABILITY_WMI_ONLY, wil->fw_capabilities)) {
+ wil_err(wil, "while in debug_fw or wmi_only mode\n");
return -EINVAL;
}
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index cd57d3e..e891068 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -99,8 +99,10 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
*/
int msi_only = pdev->msi_enabled;
bool _use_msi = use_msi;
+ bool wmi_only = test_bit(WMI_FW_CAPABILITY_WMI_ONLY,
+ wil->fw_capabilities);
- wil_dbg_misc(wil, "if_pcie_enable\n");
+ wil_dbg_misc(wil, "if_pcie_enable, wmi_only %d\n", wmi_only);
pdev->msi_enabled = 0;
@@ -123,9 +125,11 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
if (rc)
goto stop_master;
- /* need reset here to obtain MAC */
+ /* need reset here to obtain MAC or in case of WMI-only FW, full reset
+ * and fw loading takes place
+ */
mutex_lock(&wil->mutex);
- rc = wil_reset(wil, false);
+ rc = wil_reset(wil, wmi_only);
mutex_unlock(&wil->mutex);
if (rc)
goto release_irq;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 9c4a0bd..906aa72 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -57,6 +57,7 @@ enum wmi_fw_capability {
WMI_FW_CAPABILITY_RF_SECTORS = 2,
WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT = 3,
WMI_FW_CAPABILITY_DISABLE_AP_SME = 4,
+ WMI_FW_CAPABILITY_WMI_ONLY = 5,
WMI_FW_CAPABILITY_MAX,
};
--
1.9.1
^ permalink raw reply related
* [PATCH v2 06/13] wil6210: missing reinit_completion in wmi_call
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
The code in wmi_call uses the wil->wmi_call completion
structure to wait for a reply.
In some scenarios, complete was called twice on the
completion structure. This happened mainly with a disconnect
event which can arrive both unsolicited and as a reply to
a disconnect request. In this case the completion structure
was left marked as "done" and the next wmi_call returned
immediately with a corrupted reply buffer. This caused
unexpected results including crashes.
Fix this by adding the missing call to reinit_completion.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 0137ac5..d30b3fc 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -957,6 +957,7 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
wil->reply_id = reply_id;
wil->reply_buf = reply;
wil->reply_size = reply_size;
+ reinit_completion(&wil->wmi_call);
spin_unlock(&wil->wmi_ev_lock);
rc = __wmi_send(wil, cmdid, buf, len);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 08/13] wil6210: fix for broadcast workaround in PBSS
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
Currently we do not have full support for broadcast from
a station inside a PBSS network.
We have a workaround where instead of broadcast we do a
unicast to every known station in the PBSS.
This workaround was performed only for P2P clients.
This fix will perform the broadcast workaround also for a
regular station inside a PBSS.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 1 +
drivers/net/wireless/ath/wil6210/txrx.c | 35 ++++++++++++++++-------------
2 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index f8499a8..9a92790 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -601,6 +601,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
goto out;
}
wil->privacy = sme->privacy;
+ wil->pbss = sme->pbss;
if (wil->privacy) {
/* For secure assoc, remove old keys */
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 6e7dc8d..1311688 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1195,17 +1195,6 @@ static struct vring *wil_find_tx_bcast_2(struct wil6210_priv *wil,
return v;
}
-static struct vring *wil_find_tx_bcast(struct wil6210_priv *wil,
- struct sk_buff *skb)
-{
- struct wireless_dev *wdev = wil->wdev;
-
- if (wdev->iftype != NL80211_IFTYPE_AP)
- return wil_find_tx_bcast_2(wil, skb);
-
- return wil_find_tx_bcast_1(wil, skb);
-}
-
static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
int vring_index)
{
@@ -1905,12 +1894,26 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
pr_once_fw = false;
/* find vring */
- if (wil->wdev->iftype == NL80211_IFTYPE_STATION) {
- /* in STA mode (ESS), all to same VRING */
+ if (wil->wdev->iftype == NL80211_IFTYPE_STATION && !wil->pbss) {
+ /* in STA mode (ESS), all to same VRING (to AP) */
vring = wil_find_tx_vring_sta(wil, skb);
- } else { /* direct communication, find matching VRING */
- vring = bcast ? wil_find_tx_bcast(wil, skb) :
- wil_find_tx_ucast(wil, skb);
+ } else if (bcast) {
+ if (wil->pbss)
+ /* in pbss, no bcast VRING - duplicate skb in
+ * all stations VRINGs
+ */
+ vring = wil_find_tx_bcast_2(wil, skb);
+ else if (wil->wdev->iftype == NL80211_IFTYPE_AP)
+ /* AP has a dedicated bcast VRING */
+ vring = wil_find_tx_bcast_1(wil, skb);
+ else
+ /* unexpected combination, fallback to duplicating
+ * the skb in all stations VRINGs
+ */
+ vring = wil_find_tx_bcast_2(wil, skb);
+ } else {
+ /* unicast, find specific VRING by dest. address */
+ vring = wil_find_tx_ucast(wil, skb);
}
if (unlikely(!vring)) {
wil_dbg_txrx(wil, "No Tx VRING found for %pM\n", eth->h_dest);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 07/13] wil6210: protect against false interrupt during reset sequence
From: Maya Erez @ 2017-01-12 13:05 UTC (permalink / raw)
To: Kalle Valo; +Cc: Hamad Kadmany, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
During reset sequence it is seen that device is generating an
interrupt eventhough interrupts are masked at device level.
Add workaround to disable the interrupts from host side during
reset and clear any pending interrupts before re-enabling
the interrupt.
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 9b8fa6a..85a795a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -918,7 +918,10 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
flush_workqueue(wil->wmi_wq);
wil_bl_crash_info(wil, false);
+ wil_disable_irq(wil);
rc = wil_target_reset(wil);
+ wil6210_clear_irq(wil);
+ wil_enable_irq(wil);
wil_rx_fini(wil);
if (rc) {
wil_bl_crash_info(wil, true);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 09/13] wil6210: align to latest auto generated wmi.h
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.h | 45 ++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 906aa72..7c9fee5 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -187,6 +187,7 @@ enum wmi_command_id {
WMI_RS_CFG_CMDID = 0x921,
WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
WMI_AOA_MEAS_CMDID = 0x923,
+ WMI_BRP_SET_ANT_LIMIT_CMDID = 0x924,
WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
WMI_NEW_STA_CMDID = 0x935,
@@ -547,7 +548,9 @@ struct wmi_pcp_start_cmd {
u8 pcp_max_assoc_sta;
u8 hidden_ssid;
u8 is_go;
- u8 reserved0[6];
+ u8 reserved0[5];
+ /* abft_len override if non-0 */
+ u8 abft_len;
u8 disable_ap_sme;
u8 network_type;
u8 channel;
@@ -1084,6 +1087,7 @@ enum wmi_event_id {
WMI_RS_CFG_DONE_EVENTID = 0x1921,
WMI_GET_DETAILED_RS_RES_EVENTID = 0x1922,
WMI_AOA_MEAS_EVENTID = 0x1923,
+ WMI_BRP_SET_ANT_LIMIT_EVENTID = 0x1924,
WMI_SET_MGMT_RETRY_LIMIT_EVENTID = 0x1930,
WMI_GET_MGMT_RETRY_LIMIT_EVENTID = 0x1931,
WMI_TOF_SESSION_END_EVENTID = 0x1991,
@@ -1304,7 +1308,8 @@ struct wmi_connect_event {
u8 assoc_req_len;
u8 assoc_resp_len;
u8 cid;
- u8 reserved2[3];
+ u8 aid;
+ u8 reserved2[2];
/* not in use */
u8 assoc_info[0];
} __packed;
@@ -1777,6 +1782,42 @@ struct wmi_get_detailed_rs_res_event {
u8 reserved[3];
} __packed;
+/* BRP antenna limit mode */
+enum wmi_brp_ant_limit_mode {
+ /* Disable BRP force antenna limit */
+ WMI_BRP_ANT_LIMIT_MODE_DISABLE = 0x00,
+ /* Define maximal antennas limit. Only effective antennas will be
+ * actually used
+ */
+ WMI_BRP_ANT_LIMIT_MODE_EFFECTIVE = 0x01,
+ /* Force a specific number of antennas */
+ WMI_BRP_ANT_LIMIT_MODE_FORCE = 0x02,
+ /* number of BRP antenna limit modes */
+ WMI_BRP_ANT_LIMIT_MODES_NUM = 0x03,
+};
+
+/* WMI_BRP_SET_ANT_LIMIT_CMDID */
+struct wmi_brp_set_ant_limit_cmd {
+ /* connection id */
+ u8 cid;
+ /* enum wmi_brp_ant_limit_mode */
+ u8 limit_mode;
+ /* antenna limit count, 1-27
+ * disable_mode - ignored
+ * effective_mode - upper limit to number of antennas to be used
+ * force_mode - exact number of antennas to be used
+ */
+ u8 ant_limit;
+ u8 reserved;
+} __packed;
+
+/* WMI_BRP_SET_ANT_LIMIT_EVENTID */
+struct wmi_brp_set_ant_limit_event {
+ /* wmi_fw_status */
+ u8 status;
+ u8 reserved[3];
+} __packed;
+
/* broadcast connection ID */
#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
--
1.9.1
^ permalink raw reply related
* [PATCH v2 10/13] wil6210: report association ID (AID) per station in debugfs
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
Add reporting of the association ID (AID) for each station
as part of the stations file in the debugfs.
Valid AID values are 1-254. 0 is reported if the AID
is unknown or not reported by firmware.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/debugfs.c | 4 +++-
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 5 +++--
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index db6527a..bb8a59a 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1379,6 +1379,7 @@ static int wil_sta_debugfs_show(struct seq_file *s, void *data)
for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
struct wil_sta_info *p = &wil->sta[i];
char *status = "unknown";
+ u8 aid = 0;
switch (p->status) {
case wil_sta_unused:
@@ -1389,9 +1390,10 @@ static int wil_sta_debugfs_show(struct seq_file *s, void *data)
break;
case wil_sta_connected:
status = "connected";
+ aid = p->aid;
break;
}
- seq_printf(s, "[%d] %pM %s\n", i, p->addr, status);
+ seq_printf(s, "[%d] %pM %s AID %d\n", i, p->addr, status, aid);
if (p->status == wil_sta_connected) {
spin_lock_bh(&p->tid_rx_lock);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b9febed..b3c7583 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -523,6 +523,7 @@ struct wil_sta_info {
unsigned long tid_rx_stop_requested[BITS_TO_LONGS(WIL_STA_TID_NUM)];
struct wil_tid_crypto_rx tid_crypto_rx[WIL_STA_TID_NUM];
struct wil_tid_crypto_rx group_crypto_rx;
+ u8 aid; /* 1-254; 0 if unknown/not reported */
};
enum {
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d30b3fc..598096f 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -495,8 +495,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
}
ch = evt->channel + 1;
- wil_info(wil, "Connect %pM channel [%d] cid %d\n",
- evt->bssid, ch, evt->cid);
+ wil_info(wil, "Connect %pM channel [%d] cid %d aid %d\n",
+ evt->bssid, ch, evt->cid, evt->aid);
wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET, 16, 1,
evt->assoc_info, len - sizeof(*evt), true);
@@ -604,6 +604,7 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
}
wil->sta[evt->cid].status = wil_sta_connected;
+ wil->sta[evt->cid].aid = evt->aid;
set_bit(wil_status_fwconnected, wil->status);
wil_update_net_queues_bh(wil, NULL, false);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 13/13] wil6210: convert symbolic permissions to octal permissions
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
Symbolic permissions are no longer recommended.
This patch changes the symbolic permissions in wil6210 driver
to octal permissions.
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 2 +-
drivers/net/wireless/ath/wil6210/debugfs.c | 128 ++++++++++++++--------------
drivers/net/wireless/ath/wil6210/main.c | 16 ++--
drivers/net/wireless/ath/wil6210/pcie_bus.c | 2 +-
drivers/net/wireless/ath/wil6210/txrx.c | 4 +-
drivers/net/wireless/ath/wil6210/wmi.c | 6 +-
6 files changed, 79 insertions(+), 79 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 9a92790..e25e78e 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -21,7 +21,7 @@
#define WIL_MAX_ROC_DURATION_MS 5000
bool disable_ap_sme;
-module_param(disable_ap_sme, bool, S_IRUGO);
+module_param(disable_ap_sme, bool, 0444);
MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME");
#define CHAN60G(_channel, _flags) { \
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 97e9088..3e8cdf1 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -364,13 +364,13 @@ static void wil6210_debugfs_init_offset(struct wil6210_priv *wil,
}
static const struct dbg_off isr_off[] = {
- {"ICC", S_IRUGO | S_IWUSR, offsetof(struct RGF_ICR, ICC), doff_io32},
- {"ICR", S_IRUGO | S_IWUSR, offsetof(struct RGF_ICR, ICR), doff_io32},
- {"ICM", S_IRUGO | S_IWUSR, offsetof(struct RGF_ICR, ICM), doff_io32},
- {"ICS", S_IWUSR, offsetof(struct RGF_ICR, ICS), doff_io32},
- {"IMV", S_IRUGO | S_IWUSR, offsetof(struct RGF_ICR, IMV), doff_io32},
- {"IMS", S_IWUSR, offsetof(struct RGF_ICR, IMS), doff_io32},
- {"IMC", S_IWUSR, offsetof(struct RGF_ICR, IMC), doff_io32},
+ {"ICC", 0644, offsetof(struct RGF_ICR, ICC), doff_io32},
+ {"ICR", 0644, offsetof(struct RGF_ICR, ICR), doff_io32},
+ {"ICM", 0644, offsetof(struct RGF_ICR, ICM), doff_io32},
+ {"ICS", 0244, offsetof(struct RGF_ICR, ICS), doff_io32},
+ {"IMV", 0644, offsetof(struct RGF_ICR, IMV), doff_io32},
+ {"IMS", 0244, offsetof(struct RGF_ICR, IMS), doff_io32},
+ {"IMC", 0244, offsetof(struct RGF_ICR, IMC), doff_io32},
{},
};
@@ -390,9 +390,9 @@ static int wil6210_debugfs_create_ISR(struct wil6210_priv *wil,
}
static const struct dbg_off pseudo_isr_off[] = {
- {"CAUSE", S_IRUGO, HOSTADDR(RGF_DMA_PSEUDO_CAUSE), doff_io32},
- {"MASK_SW", S_IRUGO, HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW), doff_io32},
- {"MASK_FW", S_IRUGO, HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW), doff_io32},
+ {"CAUSE", 0444, HOSTADDR(RGF_DMA_PSEUDO_CAUSE), doff_io32},
+ {"MASK_SW", 0444, HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW), doff_io32},
+ {"MASK_FW", 0444, HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_FW), doff_io32},
{},
};
@@ -411,40 +411,40 @@ static int wil6210_debugfs_create_pseudo_ISR(struct wil6210_priv *wil,
}
static const struct dbg_off lgc_itr_cnt_off[] = {
- {"TRSH", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_CNT_TRSH), doff_io32},
- {"DATA", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_CNT_DATA), doff_io32},
- {"CTL", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_CNT_CRL), doff_io32},
+ {"TRSH", 0644, HOSTADDR(RGF_DMA_ITR_CNT_TRSH), doff_io32},
+ {"DATA", 0644, HOSTADDR(RGF_DMA_ITR_CNT_DATA), doff_io32},
+ {"CTL", 0644, HOSTADDR(RGF_DMA_ITR_CNT_CRL), doff_io32},
{},
};
static const struct dbg_off tx_itr_cnt_off[] = {
- {"TRSH", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_CNT_TRSH),
+ {"TRSH", 0644, HOSTADDR(RGF_DMA_ITR_TX_CNT_TRSH),
doff_io32},
- {"DATA", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_CNT_DATA),
+ {"DATA", 0644, HOSTADDR(RGF_DMA_ITR_TX_CNT_DATA),
doff_io32},
- {"CTL", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_CNT_CTL),
+ {"CTL", 0644, HOSTADDR(RGF_DMA_ITR_TX_CNT_CTL),
doff_io32},
- {"IDL_TRSH", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_TRSH),
+ {"IDL_TRSH", 0644, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_TRSH),
doff_io32},
- {"IDL_DATA", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_DATA),
+ {"IDL_DATA", 0644, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_DATA),
doff_io32},
- {"IDL_CTL", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_CTL),
+ {"IDL_CTL", 0644, HOSTADDR(RGF_DMA_ITR_TX_IDL_CNT_CTL),
doff_io32},
{},
};
static const struct dbg_off rx_itr_cnt_off[] = {
- {"TRSH", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_CNT_TRSH),
+ {"TRSH", 0644, HOSTADDR(RGF_DMA_ITR_RX_CNT_TRSH),
doff_io32},
- {"DATA", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_CNT_DATA),
+ {"DATA", 0644, HOSTADDR(RGF_DMA_ITR_RX_CNT_DATA),
doff_io32},
- {"CTL", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_CNT_CTL),
+ {"CTL", 0644, HOSTADDR(RGF_DMA_ITR_RX_CNT_CTL),
doff_io32},
- {"IDL_TRSH", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_TRSH),
+ {"IDL_TRSH", 0644, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_TRSH),
doff_io32},
- {"IDL_DATA", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_DATA),
+ {"IDL_DATA", 0644, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_DATA),
doff_io32},
- {"IDL_CTL", S_IRUGO | S_IWUSR, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_CTL),
+ {"IDL_CTL", 0644, HOSTADDR(RGF_DMA_ITR_RX_IDL_CNT_CTL),
doff_io32},
{},
};
@@ -1624,7 +1624,7 @@ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil,
blob->data = (void * __force)wil->csr + HOSTADDR(map->host);
blob->size = map->to - map->from;
snprintf(name, sizeof(name), "blob_%s", map->name);
- wil_debugfs_create_ioblob(name, S_IRUGO, dbg, wil_blob);
+ wil_debugfs_create_ioblob(name, 0444, dbg, wil_blob);
}
}
@@ -1634,29 +1634,29 @@ static void wil6210_debugfs_init_blobs(struct wil6210_priv *wil,
umode_t mode;
const struct file_operations *fops;
} dbg_files[] = {
- {"mbox", S_IRUGO, &fops_mbox},
- {"vrings", S_IRUGO, &fops_vring},
- {"stations", S_IRUGO, &fops_sta},
- {"desc", S_IRUGO, &fops_txdesc},
- {"bf", S_IRUGO, &fops_bf},
- {"ssid", S_IRUGO | S_IWUSR, &fops_ssid},
- {"mem_val", S_IRUGO, &fops_memread},
- {"reset", S_IWUSR, &fops_reset},
- {"rxon", S_IWUSR, &fops_rxon},
- {"tx_mgmt", S_IWUSR, &fops_txmgmt},
- {"wmi_send", S_IWUSR, &fops_wmi},
- {"back", S_IRUGO | S_IWUSR, &fops_back},
- {"pmccfg", S_IRUGO | S_IWUSR, &fops_pmccfg},
- {"pmcdata", S_IRUGO, &fops_pmcdata},
- {"temp", S_IRUGO, &fops_temp},
- {"freq", S_IRUGO, &fops_freq},
- {"link", S_IRUGO, &fops_link},
- {"info", S_IRUGO, &fops_info},
- {"recovery", S_IRUGO | S_IWUSR, &fops_recovery},
- {"led_cfg", S_IRUGO | S_IWUSR, &fops_led_cfg},
- {"led_blink_time", S_IRUGO | S_IWUSR, &fops_led_blink_time},
- {"fw_capabilities", S_IRUGO, &fops_fw_capabilities},
- {"fw_version", S_IRUGO, &fops_fw_version},
+ {"mbox", 0444, &fops_mbox},
+ {"vrings", 0444, &fops_vring},
+ {"stations", 0444, &fops_sta},
+ {"desc", 0444, &fops_txdesc},
+ {"bf", 0444, &fops_bf},
+ {"ssid", 0644, &fops_ssid},
+ {"mem_val", 0644, &fops_memread},
+ {"reset", 0244, &fops_reset},
+ {"rxon", 0244, &fops_rxon},
+ {"tx_mgmt", 0244, &fops_txmgmt},
+ {"wmi_send", 0244, &fops_wmi},
+ {"back", 0644, &fops_back},
+ {"pmccfg", 0644, &fops_pmccfg},
+ {"pmcdata", 0444, &fops_pmcdata},
+ {"temp", 0444, &fops_temp},
+ {"freq", 0444, &fops_freq},
+ {"link", 0444, &fops_link},
+ {"info", 0444, &fops_info},
+ {"recovery", 0644, &fops_recovery},
+ {"led_cfg", 0644, &fops_led_cfg},
+ {"led_blink_time", 0644, &fops_led_blink_time},
+ {"fw_capabilities", 0444, &fops_fw_capabilities},
+ {"fw_version", 0444, &fops_fw_version},
};
static void wil6210_debugfs_init_files(struct wil6210_priv *wil,
@@ -1695,32 +1695,32 @@ static void wil6210_debugfs_init_isr(struct wil6210_priv *wil,
/* fields in struct wil6210_priv */
static const struct dbg_off dbg_wil_off[] = {
- WIL_FIELD(privacy, S_IRUGO, doff_u32),
- WIL_FIELD(status[0], S_IRUGO | S_IWUSR, doff_ulong),
- WIL_FIELD(hw_version, S_IRUGO, doff_x32),
- WIL_FIELD(recovery_count, S_IRUGO, doff_u32),
- WIL_FIELD(ap_isolate, S_IRUGO, doff_u32),
- WIL_FIELD(discovery_mode, S_IRUGO | S_IWUSR, doff_u8),
- WIL_FIELD(chip_revision, S_IRUGO, doff_u8),
- WIL_FIELD(abft_len, S_IRUGO | S_IWUSR, doff_u8),
+ WIL_FIELD(privacy, 0444, doff_u32),
+ WIL_FIELD(status[0], 0644, doff_ulong),
+ WIL_FIELD(hw_version, 0444, doff_x32),
+ WIL_FIELD(recovery_count, 0444, doff_u32),
+ WIL_FIELD(ap_isolate, 0444, doff_u32),
+ WIL_FIELD(discovery_mode, 0644, doff_u8),
+ WIL_FIELD(chip_revision, 0444, doff_u8),
+ WIL_FIELD(abft_len, 0644, doff_u8),
{},
};
static const struct dbg_off dbg_wil_regs[] = {
- {"RGF_MAC_MTRL_COUNTER_0", S_IRUGO, HOSTADDR(RGF_MAC_MTRL_COUNTER_0),
+ {"RGF_MAC_MTRL_COUNTER_0", 0444, HOSTADDR(RGF_MAC_MTRL_COUNTER_0),
doff_io32},
- {"RGF_USER_USAGE_1", S_IRUGO, HOSTADDR(RGF_USER_USAGE_1), doff_io32},
+ {"RGF_USER_USAGE_1", 0444, HOSTADDR(RGF_USER_USAGE_1), doff_io32},
{},
};
/* static parameters */
static const struct dbg_off dbg_statics[] = {
- {"desc_index", S_IRUGO | S_IWUSR, (ulong)&dbg_txdesc_index, doff_u32},
- {"vring_index", S_IRUGO | S_IWUSR, (ulong)&dbg_vring_index, doff_u32},
- {"mem_addr", S_IRUGO | S_IWUSR, (ulong)&mem_addr, doff_u32},
- {"vring_idle_trsh", S_IRUGO | S_IWUSR, (ulong)&vring_idle_trsh,
+ {"desc_index", 0644, (ulong)&dbg_txdesc_index, doff_u32},
+ {"vring_index", 0644, (ulong)&dbg_vring_index, doff_u32},
+ {"mem_addr", 0644, (ulong)&mem_addr, doff_u32},
+ {"vring_idle_trsh", 0644, (ulong)&vring_idle_trsh,
doff_u32},
- {"led_polarity", S_IRUGO | S_IWUSR, (ulong)&led_polarity, doff_u8},
+ {"led_polarity", 0644, (ulong)&led_polarity, doff_u8},
{},
};
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 85a795a..efb1f59 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -27,23 +27,23 @@
#define WAIT_FOR_SCAN_ABORT_MS 1000
bool debug_fw; /* = false; */
-module_param(debug_fw, bool, S_IRUGO);
+module_param(debug_fw, bool, 0444);
MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug");
static bool oob_mode;
-module_param(oob_mode, bool, S_IRUGO);
+module_param(oob_mode, bool, 0444);
MODULE_PARM_DESC(oob_mode,
" enable out of the box (OOB) mode in FW, for diagnostics and certification");
bool no_fw_recovery;
-module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
+module_param(no_fw_recovery, bool, 0644);
MODULE_PARM_DESC(no_fw_recovery, " disable automatic FW error recovery");
/* if not set via modparam, will be set to default value of 1/8 of
* rx ring size during init flow
*/
unsigned short rx_ring_overflow_thrsh = WIL6210_RX_HIGH_TRSH_INIT;
-module_param(rx_ring_overflow_thrsh, ushort, S_IRUGO);
+module_param(rx_ring_overflow_thrsh, ushort, 0444);
MODULE_PARM_DESC(rx_ring_overflow_thrsh,
" RX ring overflow threshold in descriptors.");
@@ -73,7 +73,7 @@ static int mtu_max_set(const char *val, const struct kernel_param *kp)
.get = param_get_uint,
};
-module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, S_IRUGO);
+module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, 0444);
MODULE_PARM_DESC(mtu_max, " Max MTU value.");
static uint rx_ring_order = WIL_RX_RING_SIZE_ORDER_DEFAULT;
@@ -102,11 +102,11 @@ static int ring_order_set(const char *val, const struct kernel_param *kp)
.get = param_get_uint,
};
-module_param_cb(rx_ring_order, &ring_order_ops, &rx_ring_order, S_IRUGO);
+module_param_cb(rx_ring_order, &ring_order_ops, &rx_ring_order, 0444);
MODULE_PARM_DESC(rx_ring_order, " Rx ring order; size = 1 << order");
-module_param_cb(tx_ring_order, &ring_order_ops, &tx_ring_order, S_IRUGO);
+module_param_cb(tx_ring_order, &ring_order_ops, &tx_ring_order, 0444);
MODULE_PARM_DESC(tx_ring_order, " Tx ring order; size = 1 << order");
-module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, S_IRUGO);
+module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, 0444);
MODULE_PARM_DESC(bcast_ring_order, " Bcast ring order; size = 1 << order");
#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 3a63e98..76dc2b3 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -23,7 +23,7 @@
#include <linux/rtnetlink.h>
static bool use_msi = true;
-module_param(use_msi, bool, S_IRUGO);
+module_param(use_msi, bool, 0444);
MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");
#ifdef CONFIG_PM
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 1311688..072182e 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -29,12 +29,12 @@
#include "trace.h"
static bool rtap_include_phy_info;
-module_param(rtap_include_phy_info, bool, S_IRUGO);
+module_param(rtap_include_phy_info, bool, 0444);
MODULE_PARM_DESC(rtap_include_phy_info,
" Include PHY info in the radiotap header, default - no");
bool rx_align_2;
-module_param(rx_align_2, bool, S_IRUGO);
+module_param(rx_align_2, bool, 0444);
MODULE_PARM_DESC(rx_align_2, " align Rx buffers on 4*n+2, default - no");
static inline uint wil_rx_snaplen(void)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 27d21a3..1f22c19 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -24,16 +24,16 @@
#include "trace.h"
static uint max_assoc_sta = WIL6210_MAX_CID;
-module_param(max_assoc_sta, uint, S_IRUGO | S_IWUSR);
+module_param(max_assoc_sta, uint, 0644);
MODULE_PARM_DESC(max_assoc_sta, " Max number of stations associated to the AP");
int agg_wsize; /* = 0; */
-module_param(agg_wsize, int, S_IRUGO | S_IWUSR);
+module_param(agg_wsize, int, 0644);
MODULE_PARM_DESC(agg_wsize, " Window size for Tx Block Ack after connect;"
" 0 - use default; < 0 - don't auto-establish");
u8 led_id = WIL_LED_INVALID_ID;
-module_param(led_id, byte, S_IRUGO);
+module_param(led_id, byte, 0444);
MODULE_PARM_DESC(led_id,
" 60G device led enablement. Set the led ID (0-2) to enable");
--
1.9.1
^ permalink raw reply related
* [PATCH v2 12/13] wil6210: set dma mask to reflect device capability
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Hamad Kadmany, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
11ad device supports 48 bit addresses, reflect that
by setting the dma mask accordingly.
Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index e891068..3a63e98 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -205,6 +205,19 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
+ /* device supports 48bit addresses */
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+ if (rc) {
+ dev_err(dev, "dma_set_mask_and_coherent(48) failed: %d\n", rc);
+ rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(dev,
+ "dma_set_mask_and_coherent(32) failed: %d\n",
+ rc);
+ return rc;
+ }
+ }
+
wil = wil_if_alloc(dev);
if (IS_ERR(wil)) {
rc = (int)PTR_ERR(wil);
--
1.9.1
^ permalink raw reply related
* [PATCH v2 11/13] wil6210: option to override A-BFT length in start AP/PCP
From: Maya Erez @ 2017-01-12 13:06 UTC (permalink / raw)
To: Kalle Valo; +Cc: Lior David, linux-wireless, wil6210, Maya Erez
In-Reply-To: <1484226365-10433-1-git-send-email-qca_merez@qca.qualcomm.com>
From: Lior David <qca_liord@qca.qualcomm.com>
Add an option to specify and override the A-BFT length when
starting an AP/PCP. See IEEE P802.11-2016, 10.38.5.
The abft_len must be set before starting AP/PCP. It is only
needed for diagnostics and certification.
Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/debugfs.c | 1 +
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index bb8a59a..97e9088 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1702,6 +1702,7 @@ static void wil6210_debugfs_init_isr(struct wil6210_priv *wil,
WIL_FIELD(ap_isolate, S_IRUGO, doff_u32),
WIL_FIELD(discovery_mode, S_IRUGO | S_IWUSR, doff_u8),
WIL_FIELD(chip_revision, S_IRUGO, doff_u8),
+ WIL_FIELD(abft_len, S_IRUGO | S_IWUSR, doff_u8),
{},
};
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b3c7583..a73864f 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -667,6 +667,7 @@ struct wil6210_priv {
struct dentry *debug;
struct wil_blob_wrapper blobs[ARRAY_SIZE(fw_mapping)];
u8 discovery_mode;
+ u8 abft_len;
void *platform_handle;
struct wil_platform_ops platform_ops;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 598096f..27d21a3 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1079,6 +1079,7 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
.hidden_ssid = hidden_ssid,
.is_go = is_go,
.disable_ap_sme = disable_ap_sme,
+ .abft_len = wil->abft_len,
};
struct {
struct wmi_cmd_hdr wmi;
--
1.9.1
^ permalink raw reply related
* RE: [PATCH v3 1/3] cfg80211: Add support to sched scan to report better BSSs
From: Vamsi, Krishna @ 2017-01-12 13:50 UTC (permalink / raw)
To: Johannes Berg, Arend Van Spriel, Malinen, Jouni
Cc: linux-wireless@vger.kernel.org
In-Reply-To: <1484140967.29931.6.camel@sipsolutions.net>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^ permalink raw reply
* Re: [PATCH 3/3] cfg80211: Specify the reason for connect timeout
From: Malinen, Jouni @ 2017-01-12 13:58 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless@vger.kernel.org, Kushwaha, Purushottam
In-Reply-To: <1484141491.29931.10.camel@sipsolutions.net>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^ permalink raw reply
* Re: [PATCH 3/3] cfg80211: Specify the reason for connect timeout
From: Malinen, Jouni @ 2017-01-12 14:01 UTC (permalink / raw)
To: Johannes Berg
Cc: Arend Van Spriel, linux-wireless@vger.kernel.org,
Kushwaha, Purushottam
In-Reply-To: <1484141166.29931.8.camel@sipsolutions.net>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^ permalink raw reply
* Re: [PATCH 3/3] cfg80211: Specify the reason for connect timeout
From: Johannes Berg @ 2017-01-12 14:06 UTC (permalink / raw)
To: Malinen, Jouni; +Cc: linux-wireless@vger.kernel.org, Kushwaha, Purushottam
In-Reply-To: <20170112135843.GB17983@jouni.qca.qualcomm.com>
On Thu, 2017-01-12 at 13:58 +0000, Malinen, Jouni wrote:
>
> > I think this description is misleading - one could easily
> > understand
> > "for other cases" to indicate for the cases that the AP did
> > explicitly
> > reject it, but that's obviously not true.
>
> Well, the expectation here really was that the reason for the timeout
> would be known if there was a timeout and the unspecified value would
> be used in all other cases, i.e., in cases where the AP did indeed
> explicitly reject the connection.
Hmm. It doesn't really make sense to include the attribute in that case
at all though, does it?
> I guess there might be a driver where the connect request goes into
> firmware implementation and the driver would not know whether the
> operation failed due to authentication frame or association frame
> timeout out.. Implementation itself would still be fine, but I agree
> that it might be a bit confusing the try to interpret the description
> here on what the driver should do.
>
> > Perhaps that could be reworded, to say it's used when it's not
> > known,
> > or such? I'd not indicate the value (0) either, just specify the
> > name,
> > and put a % in front to get better formatting for it please.
>
> Sure, I can say that NL80211_TIMEOUT_UNSPECIFIED is used when the
> reason for the timeout is not known or there was an explicit
> rejection instead of a timeout.
See above - why even think about this attribute in the successful case?
> That said, cfg80211_connect_bss() is really currently documented to
> be used only for the success case just like
> cfg80211_connect_result(). In other words, if a driver were to call
> cfg80211_connect_bss(), it should really always specify
> NL80211_TIMEOUT_UNSPECIFIED here based on the current documented us.
> All failure would then need to be reported with
> cfg80211_connect_timeout() for the timeout case or by not following
> the documentation and calling cfg80211_connect_result() or
> cfg80211_connect_bss() for rejection cases. That said, the
> documentation for the connect() callback function does describe the
> failure case behavior correctly. I think I cleaned up that at some
> point, but did not update the function documentation at the same
> time.
Ok.
> So it looks like some additional cleanup would be needed to make the
> documentation actually match what we expect the driver to do for
> rejection cases.. I'd like to leave it out from this specific patch
> and address the cleanup of existing failure case description in a
> separate patch.
Fair enough. I still think we should not include the
ATTR_TIMEOUT_REASON for the successful or explicit rejection case at
all though. We can really even distinguish that in the low-level
function, I think?
johannes
^ permalink raw reply
* [PATCH] mac80211: prevent skb/txq mismatch
From: Michal Kazior @ 2017-01-12 14:28 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, greearb, mohammed, Michal Kazior
Station structure is considered as not uploaded
(to driver) until drv_sta_state() finishes. This
call is however done after the structure is
attached to mac80211 internal lists and hashes.
This means mac80211 can lookup (and use) station
structure before it is uploaded to a driver.
If this happens (structure exists, but
sta->uploaded is false) fast_tx path can still be
taken. Deep in the fastpath call the sta->uploaded
is checked against to derive "pubsta" argument for
ieee80211_get_txq(). If sta->uploaded is false
(and sta is actually non-NULL) ieee80211_get_txq()
effectively downgraded to vif->txq.
At first glance this may look innocent but coerces
mac80211 into a state that is almost guaranteed
(codel may drop offending skb) to crash because a
station-oriented skb gets queued up on
vif-oriented txq. The ieee80211_tx_dequeue() ends
up looking at info->control.flags and tries to use
txq->sta which in the fail case is NULL.
It's probably pointless to pretend one can
downgrade skb from sta-txq to vif-txq.
Only drivers using wake_tx_queue were affected.
Example crash dump before fix:
Unable to handle kernel paging request at virtual address ffffe26c
PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211]
[<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from
[<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core])
[<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from
[<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core])
[<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core])
[<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci])
[<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<c0572e90>] (net_rx_action+0xac/0x160)
Reported-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
net/mac80211/tx.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 4dea18be385c..c77fcf83d004 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1244,13 +1244,16 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
struct ieee80211_vif *vif,
- struct ieee80211_sta *pubsta,
+ struct sta_info *sta,
struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_txq *txq = NULL;
+ if (sta && !sta->uploaded)
+ return NULL;
+
if ((info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) ||
(info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE))
return NULL;
@@ -1258,10 +1261,10 @@ static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
if (!ieee80211_is_data(hdr->frame_control))
return NULL;
- if (pubsta) {
+ if (sta) {
u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
- txq = pubsta->txq[tid];
+ txq = sta->sta.txq[tid];
} else if (vif) {
txq = vif->txq;
}
@@ -1504,23 +1507,17 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local,
struct fq *fq = &local->fq;
struct ieee80211_vif *vif;
struct txq_info *txqi;
- struct ieee80211_sta *pubsta;
if (!local->ops->wake_tx_queue ||
sdata->vif.type == NL80211_IFTYPE_MONITOR)
return false;
- if (sta && sta->uploaded)
- pubsta = &sta->sta;
- else
- pubsta = NULL;
-
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
sdata = container_of(sdata->bss,
struct ieee80211_sub_if_data, u.ap);
vif = &sdata->vif;
- txqi = ieee80211_get_txq(local, vif, pubsta, skb);
+ txqi = ieee80211_get_txq(local, vif, sta, skb);
if (!txqi)
return false;
--
2.1.4
^ permalink raw reply related
* Re: [PATCH 3/3] cfg80211: Specify the reason for connect timeout
From: Malinen, Jouni @ 2017-01-12 14:29 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless@vger.kernel.org, Kushwaha, Purushottam
In-Reply-To: <1484229979.5391.5.camel@sipsolutions.net>
On Thu, Jan 12, 2017 at 03:06:19PM +0100, Johannes Berg wrote:
> On Thu, 2017-01-12 at 13:58 +0000, Malinen, Jouni wrote:
> >=20
> > > I think this description is misleading - one could easily
> > > understand
> > > "for other cases" to indicate for the cases that the AP did
> > > explicitly
> > > reject it, but that's obviously not true.
> >=20
> > Well, the expectation here really was that the reason for the timeout
> > would be known if there was a timeout and the unspecified value would
> > be used in all other cases, i.e., in cases where the AP did indeed
> > explicitly reject the connection.
>=20
> Hmm. It doesn't really make sense to include the attribute in that case
> at all though, does it?
We don't.. This discussion here is about the C API where we cannot
remove the argument from the call without adding yet another inline
wrapper, but the actual function that generates the netlink message does
not add the timeout reason attribute for success or explicit rejection
cases.
> > Sure, I can say that NL80211_TIMEOUT_UNSPECIFIED is used when the
> > reason for the timeout is not known or there was an explicit
> > rejection instead of a timeout.
>=20
> See above - why even think about this attribute in the successful case?
See above.. C API. Or do you want yet another wrapper for
cfg80211_connect_bss() to be added while trying to hide
cfg80211_connect_bss() from drivers somehow?
> Fair enough. I still think we should not include the
> ATTR_TIMEOUT_REASON for the successful or explicit rejection case at
> all though. We can really even distinguish that in the low-level
> function, I think?
nl80211_send_connect_result() already does this:
(status < 0 &&
(nla_put_flag(msg, NL80211_ATTR_TIMED_OUT) ||
nla_put_u32(msg, NL80211_ATTR_TIMEOUT_REASON, timeout_reason))) |=
|
That status =3D=3D -1 special case used to be internal special value within
cfg80211, but it gets exposed to drivers since we use
cfg80211_connect_bss() both internally and from drivers instead of
having separate wrappers for drivers for cases where the bss entry is
explicitly specified.
--=20
Jouni Malinen PGP id EFC895FA=
^ permalink raw reply
* Re: [PATCH 3/3] cfg80211: Specify the reason for connect timeout
From: Johannes Berg @ 2017-01-12 14:32 UTC (permalink / raw)
To: Malinen, Jouni; +Cc: linux-wireless@vger.kernel.org, Kushwaha, Purushottam
In-Reply-To: <20170112142926.GA19489@jouni.qca.qualcomm.com>
> We don't.. This discussion here is about the C API where we cannot
> remove the argument from the call without adding yet another inline
> wrapper, but the actual function that generates the netlink message
> does not add the timeout reason attribute for success or explicit
> rejection cases.
Ah. But we can just say here then that it's ignored in those cases, and
not really worry about it?
johannes
^ permalink raw reply
* Re: [1/2] mwifiex: code rearrangement in pcie.c and sdio.c
From: Kalle Valo @ 2017-01-12 14:46 UTC (permalink / raw)
To: Amitkumar Karwar
Cc: linux-wireless, Cathy Luo, Nishant Sarmukadam, rajatja,
briannorris, dmitry.torokhov, Xinming Hu, Amitkumar Karwar
In-Reply-To: <1480517537-9920-1-git-send-email-akarwar@marvell.com>
Amitkumar Karwar <akarwar@marvell.com> wrote:
> From: Xinming Hu <huxm@marvell.com>
>
> Next patch in this series is going to use mwifiex_read_reg() in remove
> handlers. The changes here are prerequisites to avoid forward
> declarations.
>
> Signed-off-by: Xinming Hu <huxm@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
2 patches applied to wireless-drivers-next.git, thanks.
90ff71f95575 mwifiex: code rearrangement in pcie.c and sdio.c
045f0c1b5e26 mwifiex: get rid of global user_rmmod flag
--
https://patchwork.kernel.org/patch/9454491/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: mwifiex: use module_*_driver helper macros
From: Kalle Valo @ 2017-01-12 14:48 UTC (permalink / raw)
To: Amitkumar Karwar
Cc: linux-wireless, Cathy Luo, Nishant Sarmukadam, rajatja,
briannorris, dmitry.torokhov, Amitkumar Karwar
In-Reply-To: <1480597700-2456-1-git-send-email-akarwar@marvell.com>
Amitkumar Karwar <akarwar@marvell.com> wrote:
> After user_rmmod global flag removal, *_init_module() and
> *_cleanup_module() have become just a wrapper functions.
> We will get rid of them with the help of module_*_driver() macros.
>
> For pcie, existing ".init_if" handler has same name as what
> module_pcie_driver() macro will create. Let's rename it to
> avoid conflict.
>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Patch applied to wireless-drivers-next.git, thanks.
c0e6aa426823 mwifiex: use module_*_driver helper macros
--
https://patchwork.kernel.org/patch/9456135/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [1/5] mwifiex: get rid of mwifiex_do_flr wrapper
From: Kalle Valo @ 2017-01-12 14:49 UTC (permalink / raw)
To: Amitkumar Karwar
Cc: linux-wireless, Cathy Luo, Nishant Sarmukadam, rajatja,
briannorris, dmitry.torokhov, Xinming Hu, Amitkumar Karwar
In-Reply-To: <1481724651-30397-1-git-send-email-akarwar@marvell.com>
Amitkumar Karwar <akarwar@marvell.com> wrote:
> From: Xinming Hu <huxm@marvell.com>
>
> This patch gets rid of mwifiex_do_flr. We will call
> mwifiex_shutdown_sw() and mwifiex_reinit_sw() directly.
> These two general purpose functions will be useful for
> sdio card reset handler.
>
> Signed-off-by: Xinming Hu <huxm@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
5 patches applied to wireless-drivers-next.git, thanks.
8750ab6236b0 mwifiex: get rid of mwifiex_do_flr wrapper
ec750f1082d7 mwifiex: cleanup in PCIe flr code path
c742e623e941 mwifiex: sdio card reset enhancement
a7513a4fa919 mwifiex: get rid of __mwifiex_sdio_remove helper
cc75c577806a mwifiex: get rid of global save_adapter and sdio_work
--
https://patchwork.kernel.org/patch/9474231/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* Re: [PATCH] mac80211: prevent skb/txq mismatch
From: Johannes Berg @ 2017-01-12 14:51 UTC (permalink / raw)
To: Mohammed Shafi Shajakhan, Michal Kazior; +Cc: linux-wireless, greearb, mohammed
In-Reply-To: <20170112144527.GA10941@atheros-ThinkPad-T61>
On Thu, 2017-01-12 at 20:15 +0530, Mohammed Shafi Shajakhan wrote:
>
> > Reported-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> > Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
>
> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
That makes no sense, you're not handling the patch in any way. You can
say Tested-by, or Acked-by if you like, but not S-o-b. See the DCO
(Documentation/SubmittingPatches)
johannes
^ permalink raw reply
* Re: [PATCH] mac80211: prevent skb/txq mismatch
From: Mohammed Shafi Shajakhan @ 2017-01-12 14:45 UTC (permalink / raw)
To: Michal Kazior; +Cc: johannes, linux-wireless, greearb, mohammed
In-Reply-To: <1484231321-3179-1-git-send-email-michal.kazior@tieto.com>
On Thu, Jan 12, 2017 at 03:28:41PM +0100, Michal Kazior wrote:
> Station structure is considered as not uploaded
> (to driver) until drv_sta_state() finishes. This
> call is however done after the structure is
> attached to mac80211 internal lists and hashes.
> This means mac80211 can lookup (and use) station
> structure before it is uploaded to a driver.
>
> If this happens (structure exists, but
> sta->uploaded is false) fast_tx path can still be
> taken. Deep in the fastpath call the sta->uploaded
> is checked against to derive "pubsta" argument for
> ieee80211_get_txq(). If sta->uploaded is false
> (and sta is actually non-NULL) ieee80211_get_txq()
> effectively downgraded to vif->txq.
>
> At first glance this may look innocent but coerces
> mac80211 into a state that is almost guaranteed
> (codel may drop offending skb) to crash because a
> station-oriented skb gets queued up on
> vif-oriented txq. The ieee80211_tx_dequeue() ends
> up looking at info->control.flags and tries to use
> txq->sta which in the fail case is NULL.
>
> It's probably pointless to pretend one can
> downgrade skb from sta-txq to vif-txq.
>
> Only drivers using wake_tx_queue were affected.
>
> Example crash dump before fix:
>
> Unable to handle kernel paging request at virtual address ffffe26c
> PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211]
> [<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from
> [<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core])
> [<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from
> [<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core])
> [<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core])
> [<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci])
> [<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from
> [<c0572e90>] (net_rx_action+0xac/0x160)
>
> Reported-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
> ---
> net/mac80211/tx.c | 17 +++++++----------
> 1 file changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
> index 4dea18be385c..c77fcf83d004 100644
> --- a/net/mac80211/tx.c
> +++ b/net/mac80211/tx.c
> @@ -1244,13 +1244,16 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
>
> static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
> struct ieee80211_vif *vif,
> - struct ieee80211_sta *pubsta,
> + struct sta_info *sta,
> struct sk_buff *skb)
> {
> struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
> struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> struct ieee80211_txq *txq = NULL;
>
> + if (sta && !sta->uploaded)
> + return NULL;
> +
> if ((info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) ||
> (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE))
> return NULL;
> @@ -1258,10 +1261,10 @@ static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
> if (!ieee80211_is_data(hdr->frame_control))
> return NULL;
>
> - if (pubsta) {
> + if (sta) {
> u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
>
> - txq = pubsta->txq[tid];
> + txq = sta->sta.txq[tid];
> } else if (vif) {
> txq = vif->txq;
> }
> @@ -1504,23 +1507,17 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local,
> struct fq *fq = &local->fq;
> struct ieee80211_vif *vif;
> struct txq_info *txqi;
> - struct ieee80211_sta *pubsta;
>
> if (!local->ops->wake_tx_queue ||
> sdata->vif.type == NL80211_IFTYPE_MONITOR)
> return false;
>
> - if (sta && sta->uploaded)
> - pubsta = &sta->sta;
> - else
> - pubsta = NULL;
> -
> if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
> sdata = container_of(sdata->bss,
> struct ieee80211_sub_if_data, u.ap);
>
> vif = &sdata->vif;
> - txqi = ieee80211_get_txq(local, vif, pubsta, skb);
> + txqi = ieee80211_get_txq(local, vif, sta, skb);
>
> if (!txqi)
> return false;
> --
> 2.1.4
>
^ permalink raw reply
* Re: [v3,1/5] mwifiex: don't wait for main_process in shutdown_drv
From: Kalle Valo @ 2017-01-12 14:45 UTC (permalink / raw)
To: Amitkumar Karwar
Cc: linux-wireless, Cathy Luo, Nishant Sarmukadam, rajatja,
briannorris, dmitry.torokhov, Xinming Hu, Amitkumar Karwar
In-Reply-To: <1479301749-14803-1-git-send-email-akarwar@marvell.com>
Amitkumar Karwar <akarwar@marvell.com> wrote:
> From: Xinming Hu <huxm@marvell.com>
>
> main_process is not expected to be running when shutdown_drv function
> is called. currently we wait for main_process completion in the
> function.
>
> Actually the caller has already made sure main_process is completed by
> performing below actions.
> (1) disable interrupts in if_ops->disable_int.
> (2) set adapter->surprise_removed = true, main_process wont be queued.
> (3) mwifiex_terminate_workqueue(adapter), wait for workqueue to be
> completed.
>
> This patch removes redundant wait code and takes care of related
> cleanup.
>
> Signed-off-by: Xinming Hu <huxm@marvell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
5 patches applied to wireless-drivers-next.git, thanks.
5bf15e3fb85d mwifiex: don't wait for main_process in shutdown_drv
fb45bd0c6d6b mwifiex: do not free firmware dump memory in shutdown_drv
d27121fca129 mwifiex: get rid of drv_info* adapter variables
41efaf5824e7 mwifiex: wait firmware dump complete during card remove process
3860e5e39532 mwifiex: move pcie_work and related variables inside card
--
https://patchwork.kernel.org/patch/9431485/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox