* Re: ath10k: Configure rxnss_override for 10.4 firmware.
From: Kalle Valo @ 2017-02-15 9:26 UTC (permalink / raw)
To: Ben Greear; +Cc: linux-wireless, Ben Greear, ath10k
In-Reply-To: <1486771745-15150-1-git-send-email-greearb@candelatech.com>
Ben Greear <greearb@candelatech.com> wrote:
> From: Ben Greear <greearb@candelatech.com>
>
> QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz.
>
> First, report this to user-space by setting the max-tx-speed
> and max-rx-speed vht capabilities.
>
> Second, if the peer rx-speed is configured, and if we
> are in 160 or 80+80 mode, and the peer rx-speed matches
> the max speed for 2x2 or 1x1 at 160Mhz (long guard interval),
> then use that info to set the peer_bw_rxnss_override appropriately.
>
> Without this, a 9984 firmware will not use 2x2 ratesets when
> transmitting to peer (it will be stuck at 1x1), because
> the firmware would not have configured the rxnss_override.
>
> This could use some testing....
>
> Signed-off-by: Ben Greear <greearb@candelatech.com>
Does not apply:
error: patch failed: drivers/net/wireless/ath/ath10k/mac.c:2760
error: drivers/net/wireless/ath/ath10k/mac.c: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath10k/wmi.h:6173
error: drivers/net/wireless/ath/ath10k/wmi.h: patch does not apply
stg import: Diff does not apply cleanly
Patch set to Changes Requested.
--
https://patchwork.kernel.org/patch/9567655/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply
* [PATCH v2 00/10] rt2x00 patches 14.02.2017
From: Stanislaw Gruszka @ 2017-02-15 9:24 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
Patches for rt2x00. Most important is txdone functions rework to use
ieee80211_tx_status_noskb() if can not match sent skb with status
from TX_STAT_FIFO. Currently used only for rt2800usb.
v1 -> v2:
Fix skbdesc->sta and TXDONE_ACK_REQ issues pointed by Felix.
Add changelog to patch 6, pointed by Kalle.
Gabor Juhos (1):
rt2x00: rt2800lib: move rt2800_drv_data declaration into rt2800lib.h
Stanislaw Gruszka (9):
rt2800: identify station based on status WCID
rt2x00: separte filling tx status from rt2x00lib_txdone
rt2x00: separte clearing entry from rt2x00lib_txdone
rt2x00: add txdone nomatch function
rt2x00: fixup fill_tx_status for nomatch case
rt2x00: use txdone_nomatch on rt2800usb
rt2800: status based rate flags for nomatch case
rt2800: use TXOP_BACKOFF for probe frames
rt2x00: fix rt2x00debug_dump_frame comment
drivers/net/wireless/ralink/rt2x00/rt2800.h | 27 +--
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 67 ++++++-
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 27 ++-
drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 2 +-
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 18 +-
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 +-
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 232 +++++++++++++++--------
drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 +-
drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 4 +-
9 files changed, 260 insertions(+), 128 deletions(-)
--
1.8.3.1
^ permalink raw reply
* [PATCH v2 00/10] rt2x00 patches 14.02.2017
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
Patches for rt2x00. Most important is txdone functions rework to use
ieee80211_tx_status_noskb() if can not match sent skb with status
from TX_STAT_FIFO. Currently used only for rt2800usb.
v1 -> v2:
Fix skbdesc->sta and TXDONE_ACK_REQ issues pointed by Felix.
Add changelog to patch 6, pointed by Kalle.
Gabor Juhos (1):
rt2x00: rt2800lib: move rt2800_drv_data declaration into rt2800lib.h
Stanislaw Gruszka (9):
rt2800: identify station based on status WCID
rt2x00: separte filling tx status from rt2x00lib_txdone
rt2x00: separte clearing entry from rt2x00lib_txdone
rt2x00: add txdone nomatch function
rt2x00: fixup fill_tx_status for nomatch case
rt2x00: use txdone_nomatch on rt2800usb
rt2800: status based rate flags for nomatch case
rt2800: use TXOP_BACKOFF for probe frames
rt2x00: fix rt2x00debug_dump_frame comment
drivers/net/wireless/ralink/rt2x00/rt2800.h | 27 +--
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 67 ++++++-
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 27 ++-
drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 2 +-
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 18 +-
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 +-
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 232 +++++++++++++++--------
drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 +-
drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 4 +-
9 files changed, 260 insertions(+), 128 deletions(-)
--
1.8.3.1
^ permalink raw reply
* [PATCH v2 01/10] rt2x00: rt2800lib: move rt2800_drv_data declaration into rt2800lib.h
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau, Gabor Juhos, Daniel Golle
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
From: Gabor Juhos <juhosg@openwrt.org>
The rt2800_drv_data structure contains driver specific
information. Move the declaration into the rt2800lib.h
header which is a more logical place for it. Also fix
the comment style to avoid checkpatch warning.
The patch contains no functional changes, it is in
preparation for the next patch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800.h | 25 -------------------------
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 23 +++++++++++++++++++++++
2 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
index 256496b..0e7051d 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2987,29 +2987,4 @@ enum rt2800_eeprom_word {
*/
#define BCN_TBTT_OFFSET 64
-/*
- * Hardware has 255 WCID table entries. First 32 entries are reserved for
- * shared keys. Since parts of the pairwise key table might be shared with
- * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
- */
-#define WCID_START 33
-#define WCID_END 222
-#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
-
-/*
- * RT2800 driver data structure
- */
-struct rt2800_drv_data {
- u8 calibration_bw20;
- u8 calibration_bw40;
- u8 bbp25;
- u8 bbp26;
- u8 txmixer_gain_24g;
- u8 txmixer_gain_5g;
- u8 max_psdu;
- unsigned int tbtt_tick;
- unsigned int ampdu_factor_cnt[4];
- DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
-};
-
#endif /* RT2800_H */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index 0a8b4df..8e1ae13 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -20,6 +20,29 @@
#ifndef RT2800LIB_H
#define RT2800LIB_H
+/*
+ * Hardware has 255 WCID table entries. First 32 entries are reserved for
+ * shared keys. Since parts of the pairwise key table might be shared with
+ * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
+ */
+#define WCID_START 33
+#define WCID_END 222
+#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
+
+/* RT2800 driver data structure */
+struct rt2800_drv_data {
+ u8 calibration_bw20;
+ u8 calibration_bw40;
+ u8 bbp25;
+ u8 bbp26;
+ u8 txmixer_gain_24g;
+ u8 txmixer_gain_5g;
+ u8 max_psdu;
+ unsigned int tbtt_tick;
+ unsigned int ampdu_factor_cnt[4];
+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+};
+
struct rt2800_ops {
void (*register_read)(struct rt2x00_dev *rt2x00dev,
const unsigned int offset, u32 *value);
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 02/10] rt2800: identify station based on status WCID
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
Add framework to identify sta based on tx status WCID. This is currently
not used, will start be utilized in the future patch.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 +++++
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ++-
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 8223a15..46405cc 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -855,11 +855,13 @@ void rt2800_process_rxwi(struct queue_entry *entry,
void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
struct txdone_entry_desc txdesc;
u32 word;
u16 mcs, real_mcs;
int aggr, ampdu;
+ int wcid;
/*
* Obtain the status about this packet.
@@ -872,6 +874,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
+ wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
/*
* If a frame was meant to be sent as a single non-aggregated MPDU
@@ -1468,6 +1471,7 @@ int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
return 0;
__set_bit(wcid - WCID_START, drv_data->sta_ids);
+ drv_data->wcid_to_sta[wcid - WCID_START] = sta;
/*
* Clean up WCID attributes and write STA address to the device.
@@ -1498,6 +1502,7 @@ int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, struct ieee80211_sta *sta)
* get renewed when the WCID is reused.
*/
rt2800_config_wcid(rt2x00dev, NULL, wcid);
+ drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
__clear_bit(wcid - WCID_START, drv_data->sta_ids);
return 0;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index 8e1ae13..6811d67 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -41,6 +41,7 @@ struct rt2800_drv_data {
unsigned int tbtt_tick;
unsigned int ampdu_factor_cnt[4];
DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+ struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
};
struct rt2800_ops {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
index 22d1881..9b297fc 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
@@ -102,7 +102,7 @@ enum skb_frame_desc_flags {
* of the scope of the skb->data pointer.
* @iv: IV/EIV data used during encryption/decryption.
* @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
- * @entry: The entry to which this sk buffer belongs.
+ * @sta: The station where sk buffer was sent.
*/
struct skb_frame_desc {
u8 flags;
@@ -116,6 +116,7 @@ struct skb_frame_desc {
__le32 iv[2];
dma_addr_t skb_dma;
+ struct ieee80211_sta *sta;
};
/**
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 03/10] rt2x00: separte filling tx status from rt2x00lib_txdone
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
This makes rt2x00lib_txdone a bit simpler and will allow to reuse code
in different variant of txdone which I'm preparing.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 141 +++++++++++++------------
1 file changed, 76 insertions(+), 65 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index dd66781..b5d90fe 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -313,73 +313,14 @@ static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
return ret;
}
-void rt2x00lib_txdone(struct queue_entry *entry,
- struct txdone_entry_desc *txdesc)
+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_tx_info *tx_info,
+ struct skb_frame_desc *skbdesc,
+ struct txdone_entry_desc *txdesc,
+ bool success)
{
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- unsigned int header_length, i;
u8 rate_idx, rate_flags, retry_rates;
- u8 skbdesc_flags = skbdesc->flags;
- bool success;
-
- /*
- * Unmap the skb.
- */
- rt2x00queue_unmap_skb(entry);
-
- /*
- * Remove the extra tx headroom from the skb.
- */
- skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
-
- /*
- * Signal that the TX descriptor is no longer in the skb.
- */
- skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
-
- /*
- * Determine the length of 802.11 header.
- */
- header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-
- /*
- * Remove L2 padding which was added during
- */
- if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
- rt2x00queue_remove_l2pad(entry->skb, header_length);
-
- /*
- * If the IV/EIV data was stripped from the frame before it was
- * passed to the hardware, we should now reinsert it again because
- * mac80211 will expect the same data to be present it the
- * frame as it was passed to us.
- */
- if (rt2x00_has_cap_hw_crypto(rt2x00dev))
- rt2x00crypto_tx_insert_iv(entry->skb, header_length);
-
- /*
- * Send frame to debugfs immediately, after this call is completed
- * we are going to overwrite the skb->cb array.
- */
- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-
- /*
- * Determine if the frame has been successfully transmitted and
- * remove BARs from our check list while checking for their
- * TX status.
- */
- success =
- rt2x00lib_txdone_bar_status(entry) ||
- test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
- test_bit(TXDONE_UNKNOWN, &txdesc->flags);
-
- /*
- * Update TX statistics.
- */
- rt2x00dev->link.qual.tx_success += success;
- rt2x00dev->link.qual.tx_failed += !success;
+ int i;
rate_idx = skbdesc->tx_rate_idx;
rate_flags = skbdesc->tx_rate_flags;
@@ -448,6 +389,76 @@ void rt2x00lib_txdone(struct queue_entry *entry,
else
rt2x00dev->low_level_stats.dot11RTSFailureCount++;
}
+}
+
+void rt2x00lib_txdone(struct queue_entry *entry,
+ struct txdone_entry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ u8 skbdesc_flags = skbdesc->flags;
+ unsigned int header_length;
+ bool success;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(entry);
+
+ /*
+ * Remove the extra tx headroom from the skb.
+ */
+ skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
+
+ /*
+ * Signal that the TX descriptor is no longer in the skb.
+ */
+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+ /*
+ * Determine the length of 802.11 header.
+ */
+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+ /*
+ * Remove L2 padding which was added during
+ */
+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+ rt2x00queue_remove_l2pad(entry->skb, header_length);
+
+ /*
+ * If the IV/EIV data was stripped from the frame before it was
+ * passed to the hardware, we should now reinsert it again because
+ * mac80211 will expect the same data to be present it the
+ * frame as it was passed to us.
+ */
+ if (rt2x00_has_cap_hw_crypto(rt2x00dev))
+ rt2x00crypto_tx_insert_iv(entry->skb, header_length);
+
+ /*
+ * Send frame to debugfs immediately, after this call is completed
+ * we are going to overwrite the skb->cb array.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+ /*
+ * Determine if the frame has been successfully transmitted and
+ * remove BARs from our check list while checking for their
+ * TX status.
+ */
+ success =
+ rt2x00lib_txdone_bar_status(entry) ||
+ test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+ test_bit(TXDONE_UNKNOWN, &txdesc->flags);
+
+ /*
+ * Update TX statistics.
+ */
+ rt2x00dev->link.qual.tx_success += success;
+ rt2x00dev->link.qual.tx_failed += !success;
+
+ rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
/*
* Only send the status report to mac80211 when it's a frame
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 04/10] rt2x00: separte clearing entry from rt2x00lib_txdone
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
This makes rt2x00lib_txdone a bit simpler and will allow to reuse
code in different variant of txdone which I'm preparing.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 51 +++++++++++++++-----------
1 file changed, 29 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index b5d90fe..03b368a 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -391,6 +391,32 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
}
}
+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
+{
+ /*
+ * Make this entry available for reuse.
+ */
+ entry->skb = NULL;
+ entry->flags = 0;
+
+ rt2x00dev->ops->lib->clear_entry(entry);
+
+ rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+
+ /*
+ * If the data queue was below the threshold before the txdone
+ * handler we must make sure the packet queue in the mac80211 stack
+ * is reenabled when the txdone handler has finished. This has to be
+ * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+ * before it was stopped.
+ */
+ spin_lock_bh(&entry->queue->tx_lock);
+ if (!rt2x00queue_threshold(entry->queue))
+ rt2x00queue_unpause_queue(entry->queue);
+ spin_unlock_bh(&entry->queue->tx_lock);
+}
+
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
@@ -471,30 +497,11 @@ void rt2x00lib_txdone(struct queue_entry *entry,
ieee80211_tx_status(rt2x00dev->hw, entry->skb);
else
ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
- } else
+ } else {
dev_kfree_skb_any(entry->skb);
+ }
- /*
- * Make this entry available for reuse.
- */
- entry->skb = NULL;
- entry->flags = 0;
-
- rt2x00dev->ops->lib->clear_entry(entry);
-
- rt2x00queue_index_inc(entry, Q_INDEX_DONE);
-
- /*
- * If the data queue was below the threshold before the txdone
- * handler we must make sure the packet queue in the mac80211 stack
- * is reenabled when the txdone handler has finished. This has to be
- * serialized with rt2x00mac_tx(), otherwise we can wake up queue
- * before it was stopped.
- */
- spin_lock_bh(&entry->queue->tx_lock);
- if (!rt2x00queue_threshold(entry->queue))
- rt2x00queue_unpause_queue(entry->queue);
- spin_unlock_bh(&entry->queue->tx_lock);
+ rt2x00lib_clear_entry(rt2x00dev, entry);
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 05/10] rt2x00: add txdone nomatch function
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
This txdone nomatch function will be used when we get status from the HW,
but we could not match it with any sent skb.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 ++
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 50 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 26869b3..efd6914 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -1425,6 +1425,8 @@ u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
void rt2x00lib_dmadone(struct queue_entry *entry);
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc);
+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
+ struct txdone_entry_desc *txdesc);
void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 03b368a..90fc259 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -417,6 +417,56 @@ static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
spin_unlock_bh(&entry->queue->tx_lock);
}
+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
+ struct txdone_entry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ struct ieee80211_tx_info txinfo = {};
+ bool success;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(entry);
+
+ /*
+ * Signal that the TX descriptor is no longer in the skb.
+ */
+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+
+ /*
+ * Send frame to debugfs immediately, after this call is completed
+ * we are going to overwrite the skb->cb array.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+
+ /*
+ * Determine if the frame has been successfully transmitted and
+ * remove BARs from our check list while checking for their
+ * TX status.
+ */
+ success =
+ rt2x00lib_txdone_bar_status(entry) ||
+ test_bit(TXDONE_SUCCESS, &txdesc->flags);
+
+ if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
+ /*
+ * Update TX statistics.
+ */
+ rt2x00dev->link.qual.tx_success += success;
+ rt2x00dev->link.qual.tx_failed += !success;
+
+ rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
+ success);
+ ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
+ }
+
+ dev_kfree_skb_any(entry->skb);
+ rt2x00lib_clear_entry(rt2x00dev, entry);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
+
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc)
{
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 06/10] rt2x00: fixup fill_tx_status for nomatch case
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
Add bits rt2x00lib_fill_tx_status() when filling status in nomatch
case and hopefully do not break the function for existing cases.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 6 +++++-
drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 90fc259..e95d2aa 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -357,6 +357,9 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
if (i < (IEEE80211_TX_MAX_RATES - 1))
tx_info->status.rates[i].idx = -1; /* terminate */
+ if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags))
+ tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (success)
tx_info->flags |= IEEE80211_TX_STAT_ACK;
@@ -375,7 +378,8 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
*/
if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
- tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
+ tx_info->flags |= IEEE80211_TX_STAT_AMPDU |
+ IEEE80211_TX_CTL_AMPDU;
tx_info->status.ampdu_len = 1;
tx_info->status.ampdu_ack_len = success ? 1 : 0;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
index 9b297fc..c78fb8c 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
@@ -215,6 +215,7 @@ enum txdone_entry_desc_flags {
TXDONE_FAILURE,
TXDONE_EXCESSIVE_RETRY,
TXDONE_AMPDU,
+ TXDONE_NO_ACK_REQ,
};
/**
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 07/10] rt2x00: use txdone_nomatch on rt2800usb
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
If we do not match skb entry, provide tx status via nomatch procedure.
Currently in that case we do rt2x00lib_txdone_noinfo(TXDONE_NOINFO),
which actually assume that entry->skb was posted without retries and
provide rate saved in skb desc as successful. Patch changed that to
rate read from TX_STAT_FIFO, however still do not provide correct
number of retries.
On SoC/PCI devices we keep providing status via standard txdone
procedure, no change in those devices, though we should thing about it.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 31 ++++++++++++++++++++-----
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 3 ++-
drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 2 +-
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 18 ++++++--------
4 files changed, 35 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 46405cc..4a7bec7 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -852,7 +852,8 @@ void rt2800_process_rxwi(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
-void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
+ bool match)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
@@ -860,8 +861,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
struct txdone_entry_desc txdesc;
u32 word;
u16 mcs, real_mcs;
- int aggr, ampdu;
- int wcid;
+ int aggr, ampdu, wcid, ack_req;
/*
* Obtain the status about this packet.
@@ -875,6 +875,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
+ ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED);
/*
* If a frame was meant to be sent as a single non-aggregated MPDU
@@ -891,8 +892,12 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
* Hence, replace the requested rate with the real tx rate to not
* confuse the rate control algortihm by providing clearly wrong
* data.
- */
- if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) {
+ *
+ * FIXME: if we do not find matching entry, we tell that frame was
+ * posted without any retries. We need to find a way to fix that
+ * and provide retry count.
+ */
+ if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
skbdesc->tx_rate_idx = real_mcs;
mcs = real_mcs;
}
@@ -900,6 +905,9 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
if (aggr == 1 || ampdu == 1)
__set_bit(TXDONE_AMPDU, &txdesc.flags);
+ if (!ack_req)
+ __set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags);
+
/*
* Ralink has a retry mechanism using a global fallback
* table. We setup this fallback table to try the immediate
@@ -931,7 +939,18 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
if (txdesc.retry)
__set_bit(TXDONE_FALLBACK, &txdesc.flags);
- rt2x00lib_txdone(entry, &txdesc);
+ if (!match) {
+ /* RCU assures non-null sta will not be freed by mac80211. */
+ rcu_read_lock();
+ if (likely(wcid >= WCID_START && wcid <= WCID_END))
+ skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START];
+ else
+ skbdesc->sta = NULL;
+ rt2x00lib_txdone_nomatch(entry, &txdesc);
+ rcu_read_unlock();
+ } else {
+ rt2x00lib_txdone(entry, &txdesc);
+ }
}
EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index 6811d67..d9ef260 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -191,7 +191,8 @@ void rt2800_write_tx_data(struct queue_entry *entry,
struct txentry_desc *txdesc);
void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
-void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32* txwi);
+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
+ bool match);
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
void rt2800_clear_beacon(struct queue_entry *entry);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
index de4790b..3ab3b53 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -239,7 +239,7 @@ static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry,
{
if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
rt2800_txdone_entry(entry, entry->status,
- rt2800mmio_get_txwi(entry));
+ rt2800mmio_get_txwi(entry), true);
return false;
}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 205a7b8..f11e3f5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -501,8 +501,7 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
/*
* TX control handlers
*/
-static enum txdone_entry_desc_flags
-rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
{
__le32 *txwi;
u32 word;
@@ -515,7 +514,7 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
* frame.
*/
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
- return TXDONE_FAILURE;
+ return false;
wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
@@ -537,10 +536,10 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
rt2x00_dbg(entry->queue->rt2x00dev,
"TX status report missed for queue %d entry %d\n",
entry->queue->qid, entry->entry_idx);
- return TXDONE_UNKNOWN;
+ return false;
}
- return TXDONE_SUCCESS;
+ return true;
}
static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
@@ -549,7 +548,7 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
struct queue_entry *entry;
u32 reg;
u8 qid;
- enum txdone_entry_desc_flags done_status;
+ bool match;
while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) {
/*
@@ -574,11 +573,8 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
break;
}
- done_status = rt2800usb_txdone_entry_check(entry, reg);
- if (likely(done_status == TXDONE_SUCCESS))
- rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
- else
- rt2x00lib_txdone_noinfo(entry, done_status);
+ match = rt2800usb_txdone_entry_check(entry, reg);
+ rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry), match);
}
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 08/10] rt2800: status based rate flags for nomatch case
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
We use skb_desc->tx_rate_flags from entry as rate[].flags even if
skb does not match status. Patch corrects flags and also fixes
mcs for legacy rates.
rt2800_rate_from_status() is based on Felix's mt76
mt76x2_mac_process_tx_rate() function.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 ++
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 35 +++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
index 0e7051d..480b086 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -1760,6 +1760,8 @@
#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
#define TX_STA_FIFO_MCS FIELD32(0x007f0000)
+#define TX_STA_FIFO_BW FIELD32(0x00800000)
+#define TX_STA_FIFO_SGI FIELD32(0x01000000)
#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000)
/*
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 4a7bec7..8d00c59 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -852,6 +852,39 @@ void rt2800_process_rxwi(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
+ u32 status, enum nl80211_band band)
+{
+ u8 flags = 0;
+ u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
+
+ switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
+ case RATE_MODE_HT_GREENFIELD:
+ flags |= IEEE80211_TX_RC_GREEN_FIELD;
+ /* fall through */
+ case RATE_MODE_HT_MIX:
+ flags |= IEEE80211_TX_RC_MCS;
+ break;
+ case RATE_MODE_OFDM:
+ if (band == NL80211_BAND_2GHZ)
+ idx += 4;
+ break;
+ case RATE_MODE_CCK:
+ if (idx >= 8)
+ idx -= 8;
+ break;
+ }
+
+ if (rt2x00_get_field32(status, TX_STA_FIFO_BW))
+ flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+
+ if (rt2x00_get_field32(status, TX_STA_FIFO_SGI))
+ flags |= IEEE80211_TX_RC_SHORT_GI;
+
+ skbdesc->tx_rate_idx = idx;
+ skbdesc->tx_rate_flags = flags;
+}
+
void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
bool match)
{
@@ -898,7 +931,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
* and provide retry count.
*/
if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
- skbdesc->tx_rate_idx = real_mcs;
+ rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band);
mcs = real_mcs;
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 09/10] rt2800: use TXOP_BACKOFF for probe frames
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
Even if we do not set AMPDU bit in TXWI, device still can aggregate
frame and send it with rate not corresponding to requested. That mean
we can do not sent probe frames with requested rate. To prevent that
use TXOP_BACKOFF for probe frames.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
index e1660b9..a2c1ca5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
@@ -372,15 +372,16 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
/*
* Determine IFS values
- * - Use TXOP_BACKOFF for management frames except beacons
+ * - Use TXOP_BACKOFF for probe and management frames except beacons
* - Use TXOP_SIFS for fragment bursts
* - Use TXOP_HTTXOP for everything else
*
* Note: rt2800 devices won't use CTS protection (if used)
* for frames not transmitted with TXOP_HTTXOP
*/
- if (ieee80211_is_mgmt(hdr->frame_control) &&
- !ieee80211_is_beacon(hdr->frame_control))
+ if ((ieee80211_is_mgmt(hdr->frame_control) &&
+ !ieee80211_is_beacon(hdr->frame_control)) ||
+ (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
txdesc->u.ht.txop = TXOP_BACKOFF;
else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
txdesc->u.ht.txop = TXOP_SIFS;
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 10/10] rt2x00: fix rt2x00debug_dump_frame comment
From: Stanislaw Gruszka @ 2017-02-15 9:25 UTC (permalink / raw)
To: linux-wireless; +Cc: Helmut Schaa, Felix Fietkau
In-Reply-To: <1487150713-3510-1-git-send-email-sgruszka@redhat.com>
Reported-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index efd6914..233ee8b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -1396,7 +1396,7 @@ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
* rt2x00debug_dump_frame - Dump a frame to userspace through debugfs.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @type: The type of frame that is being dumped.
- * @skb: The skb containing the frame to be dumped.
+ * @entry: The queue entry containing the frame to be dumped.
*/
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
--
1.8.3.1
^ permalink raw reply related
* Re: [RFC v2 3/7] ieee80211: add new VHT capability fields/parsing
From: Arend Van Spriel @ 2017-02-15 9:36 UTC (permalink / raw)
To: Johannes Berg, linux-wireless; +Cc: j, greearb
In-Reply-To: <1487150216.4026.18.camel@sipsolutions.net>
On 15-2-2017 10:16, Johannes Berg wrote:
> On Wed, 2017-02-15 at 10:08 +0100, Arend Van Spriel wrote:
>> [snip]
>>
>> Looks good to me.
>
> Thanks for checking :)
>
>>> + /* not covered or invalid combination received */
>>
>> Do you want to inform about the invalid/reserved combination.
>
> I'm not really sure what to do - we don't really want to print a
> message on something that might have been received from the peer, I
> think? Though I suppose we should return 0 for the invalid
> combinations, indicating that they're not supported.
Ah. This is all non-functional code yet, right? At least having a static
non-inline function in ieee80211.h will give build issues I would think.
Anyway, I would indeed return 0 and have caller deal with that.
Regards,
Arend
^ permalink raw reply
* Re: [RFC v2 3/7] ieee80211: add new VHT capability fields/parsing
From: Johannes Berg @ 2017-02-15 9:48 UTC (permalink / raw)
To: Arend Van Spriel, linux-wireless; +Cc: j, greearb
In-Reply-To: <d050648f-df94-8138-b9af-1ec18ba4af28@broadcom.com>
On Wed, 2017-02-15 at 10:36 +0100, Arend Van Spriel wrote:
>
> > I'm not really sure what to do - we don't really want to print a
> > message on something that might have been received from the peer, I
> > think? Though I suppose we should return 0 for the invalid
> > combinations, indicating that they're not supported.
>
> Ah. This is all non-functional code yet, right? At least having a
> static non-inline function in ieee80211.h will give build issues I
> would think.
No, I marked it __maybe_unused so it'll be fine. I didn't want to have
it inlined if you use it multiple times in a single source file, but I
didn't want to move it to somewhere else either ...
> Anyway, I would indeed return 0 and have caller deal with that.
Yeah, I'll do that.
johannes
^ permalink raw reply
* wireless driver crashing frequently
From: ravin goyal @ 2017-02-15 9:54 UTC (permalink / raw)
To: linux-wireless
Hello, I have a banana pi m2+ running raspbian lite 3.4.112-sun8i
I am running hostapd on it
My wireless chip is AP6212 ,when I start hostapd sometime it runs
sometime it leads to kernel crash
please follow this link to see the kernel messages: https://clbin.com/PXBSB?hl
I have been told to ask my doubt here since it is the problem of the
driver in the kernel
To make hostapd work properly I have to manuallly run this command
modprobe -v bcmdhd op_mode=2
bcmdhd is my wireless driver
after this hostapd is able to broadcast the ssid, if i don't provide
the op_mode=2 while loading the module, hostapd will not broadcast the
ssid.
any help on this ?
Regards
Ravin
^ permalink raw reply
* Re: wireless driver crashing frequently
From: Arend Van Spriel @ 2017-02-15 10:28 UTC (permalink / raw)
To: ravin goyal, linux-wireless
In-Reply-To: <CANU0Mn00ju_SZ3L+ipdnZ5R-Y1m+T=MhjHmBjMpKN_i8NPWsrg@mail.gmail.com>
On 15-2-2017 10:54, ravin goyal wrote:
> Hello, I have a banana pi m2+ running raspbian lite 3.4.112-sun8i
> I am running hostapd on it
>
> My wireless chip is AP6212 ,when I start hostapd sometime it runs
> sometime it leads to kernel crash
>
> please follow this link to see the kernel messages: https://clbin.com/PXBSB?hl
>
> I have been told to ask my doubt here since it is the problem of the
> driver in the kernel
>
> To make hostapd work properly I have to manuallly run this command
>
> modprobe -v bcmdhd op_mode=2
>
> bcmdhd is my wireless driver
>
> after this hostapd is able to broadcast the ssid, if i don't provide
> the op_mode=2 while loading the module, hostapd will not broadcast the
> ssid.
>
> any help on this ?
You are asking the wrong crowd. bcmdhd is an android driver. In upstream
linux we have brcmfmac. Are you running android or upstream linux. At
least you are on a pretty old kernel so I suspect android.
Regards,
Arend
^ permalink raw reply
* Re: [RFC v2 3/7] ieee80211: add new VHT capability fields/parsing
From: Arend Van Spriel @ 2017-02-15 10:34 UTC (permalink / raw)
To: Johannes Berg, linux-wireless; +Cc: j, greearb
In-Reply-To: <1487152112.4026.19.camel@sipsolutions.net>
On 15-2-2017 10:48, Johannes Berg wrote:
> On Wed, 2017-02-15 at 10:36 +0100, Arend Van Spriel wrote:
>>
>>> I'm not really sure what to do - we don't really want to print a
>>> message on something that might have been received from the peer, I
>>> think? Though I suppose we should return 0 for the invalid
>>> combinations, indicating that they're not supported.
>>
>> Ah. This is all non-functional code yet, right? At least having a
>> static non-inline function in ieee80211.h will give build issues I
>> would think.
>
> No, I marked it __maybe_unused so it'll be fine. I didn't want to have
> it inlined if you use it multiple times in a single source file, but I
> didn't want to move it to somewhere else either ...
Ah. Now I understand the trickery ;-) Was there really no "somewhere
else" to move it, because honestly it is confusing and a bit wasteful if
used multiple times in cfg80211 and/or drivers.
Gr. AvS
>> Anyway, I would indeed return 0 and have caller deal with that.
>
> Yeah, I'll do that.
>
> johannes
>
^ permalink raw reply
* Re: [RFC v2 3/7] ieee80211: add new VHT capability fields/parsing
From: Arend Van Spriel @ 2017-02-15 10:34 UTC (permalink / raw)
To: Johannes Berg, linux-wireless; +Cc: j, greearb
In-Reply-To: <1f3197b6-2860-632c-bbbb-3afac16f6edc@broadcom.com>
On 15-2-2017 11:34, Arend Van Spriel wrote:
> On 15-2-2017 10:48, Johannes Berg wrote:
>> On Wed, 2017-02-15 at 10:36 +0100, Arend Van Spriel wrote:
>>>
>>>> I'm not really sure what to do - we don't really want to print a
>>>> message on something that might have been received from the peer, I
>>>> think? Though I suppose we should return 0 for the invalid
>>>> combinations, indicating that they're not supported.
>>>
>>> Ah. This is all non-functional code yet, right? At least having a
>>> static non-inline function in ieee80211.h will give build issues I
>>> would think.
>>
>> No, I marked it __maybe_unused so it'll be fine. I didn't want to have
>> it inlined if you use it multiple times in a single source file, but I
>> didn't want to move it to somewhere else either ...
>
> Ah. Now I understand the trickery ;-) Was there really no "somewhere
> else" to move it, because honestly it is confusing and a bit wasteful if
> used multiple times in cfg80211 and/or drivers.
Although exporting it also comes at a cost.
Gr. AvS
> Gr. AvS
>
>>> Anyway, I would indeed return 0 and have caller deal with that.
>>
>> Yeah, I'll do that.
>>
>> johannes
>>
^ permalink raw reply
* [RFC V3 3/5] cfg80211: add request id parameter to .sched_scan_stop() signature
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
In-Reply-To: <1487155049-1892-1-git-send-email-arend.vanspriel@broadcom.com>
For multiple scheduled scan support the driver needs to know which
scheduled scan request is being stopped. Pass the request id in the
.sched_scan_stop() callback.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 +++---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 +-
include/net/cfg80211.h | 15 ++++++++-------
net/mac80211/cfg.c | 3 ++-
net/wireless/rdev-ops.h | 6 +++---
net/wireless/scan.c | 2 +-
net/wireless/trace.h | 10 +++++-----
8 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 08ab6867..bcc6e24 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3354,7 +3354,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
}
static int ath6kl_cfg80211_sscan_stop(struct wiphy *wiphy,
- struct net_device *dev)
+ struct net_device *dev, u64 reqid)
{
struct ath6kl_vif *vif = netdev_priv(dev);
bool stopped;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f860d07..b219123 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3389,7 +3389,7 @@ static int brcmf_start_internal_escan(struct brcmf_if *ifp,
}
static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy,
- struct net_device *ndev)
+ struct net_device *ndev, u64 reqid)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct brcmf_if *ifp = netdev_priv(ndev);
@@ -3591,7 +3591,7 @@ static s32 brcmf_cfg80211_resume(struct wiphy *wiphy)
cfg->wowl.pre_pmmode);
cfg->wowl.active = false;
if (cfg->wowl.nd_enabled) {
- brcmf_cfg80211_sched_scan_stop(cfg->wiphy, ifp->ndev);
+ brcmf_cfg80211_sched_scan_stop(cfg->wiphy, ifp->ndev, 0);
brcmf_fweh_unregister(cfg->pub, BRCMF_E_PFN_NET_FOUND);
brcmf_fweh_register(cfg->pub, BRCMF_E_PFN_NET_FOUND,
brcmf_notify_sched_scan_results);
@@ -3675,7 +3675,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
/* Stop scheduled scan */
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
- brcmf_cfg80211_sched_scan_stop(wiphy, ndev);
+ brcmf_cfg80211_sched_scan_stop(wiphy, ndev, 0);
/* end any scanning */
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status))
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index b734197..91c71066 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -2701,7 +2701,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv,
* previous bgscan configuration in the firmware
*/
static int mwifiex_cfg80211_sched_scan_stop(struct wiphy *wiphy,
- struct net_device *dev)
+ struct net_device *dev, u64 reqid)
{
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4933ccb..6e07ec8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2724,12 +2724,12 @@ struct cfg80211_nan_func {
* @set_cqm_txe_config: Configure connection quality monitor TX error
* thresholds.
* @sched_scan_start: Tell the driver to start a scheduled scan.
- * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
- * call must stop the scheduled scan and be ready for starting a new one
- * before it returns, i.e. @sched_scan_start may be called immediately
- * after that again and should not fail in that case. The driver should
- * not call cfg80211_sched_scan_stopped() for a requested stop (when this
- * method returns 0.)
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan with
+ * given request id. This call must stop the scheduled scan and be ready
+ * for starting a new one before it returns, i.e. @sched_scan_start may be
+ * called immediately after that again and should not fail in that case.
+ * The driver should not call cfg80211_sched_scan_stopped() for a requested
+ * stop (when this method returns 0).
*
* @mgmt_frame_register: Notify driver that a management frame type was
* registered. The callback is allowed to sleep.
@@ -3028,7 +3028,8 @@ struct cfg80211_ops {
int (*sched_scan_start)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_sched_scan_request *request);
- int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+ int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev,
+ u64 reqid);
int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_gtk_rekey_data *data);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 9c7490c..5badb2a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2198,7 +2198,8 @@ static void ieee80211_abort_scan(struct wiphy *wiphy, struct wireless_dev *wdev)
}
static int
-ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev)
+ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
+ u64 reqid)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 33d79ff..6e29cc4 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -821,11 +821,11 @@ static inline int rdev_get_antenna(struct cfg80211_registered_device *rdev,
}
static inline int rdev_sched_scan_stop(struct cfg80211_registered_device *rdev,
- struct net_device *dev)
+ struct net_device *dev, u64 reqid)
{
int ret;
- trace_rdev_sched_scan_stop(&rdev->wiphy, dev);
- ret = rdev->ops->sched_scan_stop(&rdev->wiphy, dev);
+ trace_rdev_sched_scan_stop(&rdev->wiphy, dev, reqid);
+ ret = rdev->ops->sched_scan_stop(&rdev->wiphy, dev, reqid);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 1c7dcf4..abe9b42 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -429,7 +429,7 @@ int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev,
ASSERT_RTNL();
if (!driver_initiated) {
- int err = rdev_sched_scan_stop(rdev, req->dev);
+ int err = rdev_sched_scan_stop(rdev, req->dev, req->reqid);
if (err)
return err;
}
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 52935c4..8d8f6b4 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -576,11 +576,6 @@
TP_ARGS(wiphy, netdev)
);
-DEFINE_EVENT(wiphy_netdev_evt, rdev_sched_scan_stop,
- TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
- TP_ARGS(wiphy, netdev)
-);
-
DEFINE_EVENT(wiphy_netdev_evt, rdev_set_rekey_data,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev),
TP_ARGS(wiphy, netdev)
@@ -1632,6 +1627,11 @@
TP_ARGS(wiphy, netdev, id)
);
+DEFINE_EVENT(wiphy_netdev_id_evt, rdev_sched_scan_stop,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u64 id),
+ TP_ARGS(wiphy, netdev, id)
+);
+
TRACE_EVENT(rdev_tdls_mgmt,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
u8 *peer, u8 action_code, u8 dialog_token,
--
1.9.1
^ permalink raw reply related
* [RFC V3 2/5] nl80211: allow multiple active scheduled scan requests
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
In-Reply-To: <1487155049-1892-1-git-send-email-arend.vanspriel@broadcom.com>
This patch implements the idea to have multiple scheduled scan requests
running concurrently. It mainly illustrates how to deal with the incoming
request from user-space in terms of backward compatibility. In order to
use multiple scheduled scans user-space needs to provide a flag attribute
NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is
treated as a legacy scan.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
V3:
- remove WIPHY_FLAG_SUPPORTS_SCHED_SCAN.
- make NL80211_ATTR_SCHED_SCAN_MAX_REQS type u32.
- move NL80211_ATTR_SCHED_SCAN_MAX_REQS in another split_start case.
- added lock assertions in request list handling functions.
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +-
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 2 +-
include/net/cfg80211.h | 7 +-
include/uapi/linux/nl80211.h | 12 ++-
net/wireless/core.c | 26 ++++--
net/wireless/core.h | 10 +-
net/wireless/nl80211.c | 50 ++++++++--
net/wireless/rdev-ops.h | 2 +-
net/wireless/scan.c | 102 +++++++++++++++++----
net/wireless/trace.h | 18 ++--
13 files changed, 186 insertions(+), 51 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index b7fe0af..08ab6867 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3975,7 +3975,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN_V2, ar->fw_capabilities))
- ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+ ar->wiphy->max_sched_scan_reqs = 1;
if (test_bit(ATH6KL_FW_CAPABILITY_INACTIVITY_TIMEOUT,
ar->fw_capabilities))
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 10098b7..f860d07 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6358,11 +6358,11 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
{
/* scheduled scan settings */
+ wiphy->max_sched_scan_reqs = 1;
wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
wiphy->max_sched_scan_plan_interval = BRCMF_PNO_SCHED_SCAN_MAX_PERIOD;
- wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
}
#ifdef CONFIG_PM
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index d37b169..5f1d648 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -619,7 +619,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
- hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
+ hw->wiphy->max_sched_scan_reqs = 1;
hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
/* we create the 802.11 header and zero length SSID IE. */
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 1e3bd43..b734197 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -4279,7 +4279,6 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
WIPHY_FLAG_AP_UAPSD |
- WIPHY_FLAG_SUPPORTS_SCHED_SCAN |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
WIPHY_FLAG_HAS_CHANNEL_SWITCH |
WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -4298,6 +4297,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+ wiphy->max_sched_scan_reqs = 1;
wiphy->max_sched_scan_ssids = MWIFIEX_MAX_SSID_LIST_LENGTH;
wiphy->max_sched_scan_ie_len = MWIFIEX_MAX_VSIE_LEN;
wiphy->max_match_sets = MWIFIEX_MAX_SSID_LIST_LENGTH;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index e536aa0..2606e71 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -6113,6 +6113,7 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
wl->hw->wiphy->max_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE -
sizeof(struct ieee80211_header);
+ wl->hw->wiphy->max_sched_scan_reqs = 1;
wl->hw->wiphy->max_sched_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE -
sizeof(struct ieee80211_header);
@@ -6120,7 +6121,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
wl->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD |
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
- WIPHY_FLAG_SUPPORTS_SCHED_SCAN |
WIPHY_FLAG_HAS_CHANNEL_SWITCH;
wl->hw->wiphy->features |= NL80211_FEATURE_AP_SCAN;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 571be46..4933ccb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1670,6 +1670,7 @@ struct cfg80211_bss_select_adjust {
* @rcu_head: RCU callback used to free the struct
* @owner_nlportid: netlink portid of owner (if this should is a request
* owned by a particular socket)
+ * @list: for keeping list of requests.
* @delay: delay in seconds to use before starting the first scan
* cycle. The driver may ignore this parameter and start
* immediately (or at any other time), if this feature is not
@@ -1714,6 +1715,7 @@ struct cfg80211_sched_scan_request {
unsigned long scan_start;
struct rcu_head rcu_head;
u32 owner_nlportid;
+ struct list_head list;
/* keep last */
struct ieee80211_channel *channels[0];
@@ -3171,7 +3173,7 @@ enum wiphy_flags {
WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7),
WIPHY_FLAG_IBSS_RSN = BIT(8),
WIPHY_FLAG_MESH_AUTH = BIT(10),
- WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11),
+ /* use hole at 11 */
/* use hole at 12 */
WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13),
WIPHY_FLAG_AP_UAPSD = BIT(14),
@@ -3509,6 +3511,8 @@ struct wiphy_iftype_ext_capab {
* this variable determines its size
* @max_scan_ssids: maximum number of SSIDs the device can scan for in
* any given scan
+ * @max_sched_scan_reqs: maximum number of scheduled scan requests that
+ * the device can run concurrently.
* @max_sched_scan_ssids: maximum number of SSIDs the device can scan
* for in any given scheduled scan
* @max_match_sets: maximum number of match sets the device can handle
@@ -3645,6 +3649,7 @@ struct wiphy {
int bss_priv_size;
u8 max_scan_ssids;
+ u8 max_sched_scan_reqs;
u8 max_sched_scan_ssids;
u8 max_match_sets;
u16 max_scan_ie_len;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 9a499b1..446a108 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -351,7 +351,9 @@
* are used. Extra IEs can also be passed from the userspace by
* using the %NL80211_ATTR_IE attribute. The first cycle of the
* scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- * is supplied.
+ * is supplied. If the device supports multiple concurrent scheduled
+ * scans, it will allow such when the caller provides the flag attribute
+ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
* scheduled scan is not running. The caller may assume that as soon
* as the call returns, it is safe to start a new scheduled scan again.
@@ -2012,6 +2014,11 @@ enum nl80211_commands {
* u32 attribute with an &enum nl80211_timeout_reason value. This is used,
* e.g., with %NL80211_CMD_CONNECT event.
*
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
+ * indicate that it supports multiple active scheduled scan requests.
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
+ * scan request that may be active for the device (u32).
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2423,6 +2430,9 @@ enum nl80211_attrs {
NL80211_ATTR_TIMEOUT_REASON,
+ NL80211_ATTR_SCHED_SCAN_MULTI,
+ NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 04143df..79b73d9 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -346,13 +346,17 @@ static void cfg80211_destroy_iface_wk(struct work_struct *work)
static void cfg80211_sched_scan_stop_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
+ struct cfg80211_sched_scan_request *pos, *tmp;
rdev = container_of(work, struct cfg80211_registered_device,
sched_scan_stop_wk);
rtnl_lock();
- __cfg80211_stop_sched_scan(rdev, false);
+ /* request gets removed from list so need safe iterator */
+ list_for_each_entry_safe(pos, tmp, &rdev->sched_scan_req_list, list) {
+ cfg80211_stop_sched_scan_req(rdev, pos, false);
+ }
rtnl_unlock();
}
@@ -436,6 +440,7 @@ struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
spin_lock_init(&rdev->beacon_registrations_lock);
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
+ INIT_LIST_HEAD(&rdev->sched_scan_req_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
INIT_LIST_HEAD(&rdev->mlme_unreg);
@@ -1009,7 +1014,7 @@ void __cfg80211_leave(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
struct net_device *dev = wdev->netdev;
- struct cfg80211_sched_scan_request *sched_scan_req;
+ struct cfg80211_sched_scan_request *pos, *tmp;
ASSERT_RTNL();
ASSERT_WDEV_LOCK(wdev);
@@ -1020,9 +1025,10 @@ void __cfg80211_leave(struct cfg80211_registered_device *rdev,
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
- sched_scan_req = rtnl_dereference(rdev->sched_scan_req);
- if (sched_scan_req && dev == sched_scan_req->dev)
- __cfg80211_stop_sched_scan(rdev, false);
+ list_for_each_entry_safe(pos, tmp, &rdev->sched_scan_req_list, list) {
+ if (dev == pos->dev)
+ cfg80211_stop_sched_scan_req(rdev, pos, false);
+ }
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.ie);
@@ -1097,7 +1103,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
- struct cfg80211_sched_scan_request *sched_scan_req;
+ struct cfg80211_sched_scan_request *pos, *tmp;
if (!wdev)
return NOTIFY_DONE;
@@ -1166,10 +1172,10 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
___cfg80211_scan_done(rdev, false);
}
- sched_scan_req = rtnl_dereference(rdev->sched_scan_req);
- if (WARN_ON(sched_scan_req &&
- sched_scan_req->dev == wdev->netdev)) {
- __cfg80211_stop_sched_scan(rdev, false);
+ list_for_each_entry_safe(pos, tmp,
+ &rdev->sched_scan_req_list, list) {
+ if (WARN_ON(pos && pos->dev == wdev->netdev))
+ cfg80211_stop_sched_scan_req(rdev, pos, false);
}
rdev->opencount--;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index efa690a..111bff1 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -74,6 +74,7 @@ struct cfg80211_registered_device {
u32 bss_entries;
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
struct sk_buff *scan_msg;
+ struct list_head sched_scan_req_list;
struct cfg80211_sched_scan_request __rcu *sched_scan_req;
unsigned long suspend_at;
struct work_struct scan_done_wk;
@@ -430,9 +431,16 @@ int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev,
void __cfg80211_scan_done(struct work_struct *wk);
void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
bool send_message);
+void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev,
+ struct cfg80211_sched_scan_request *req);
+int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev,
+ bool want_multi);
void __cfg80211_sched_scan_results(struct work_struct *wk);
+int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev,
+ struct cfg80211_sched_scan_request *req,
+ bool driver_initiated);
int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
- bool driver_initiated);
+ u64 reqid, bool driver_initiated);
void cfg80211_upload_connect_keys(struct wireless_dev *wdev);
int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
struct net_device *dev, enum nl80211_iftype ntype,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3721051..37c75db 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -410,6 +410,7 @@ enum nl80211_multicast_groups {
.len = sizeof(struct nl80211_bss_select_rssi_adjust)
},
[NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 },
+ [NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -1382,7 +1383,7 @@ static int nl80211_add_commands_unsplit(struct cfg80211_registered_device *rdev,
CMD(tdls_mgmt, TDLS_MGMT);
CMD(tdls_oper, TDLS_OPER);
}
- if (rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
+ if (rdev->wiphy.max_sched_scan_reqs)
CMD(sched_scan_start, START_SCHED_SCAN);
CMD(probe_client, PROBE_CLIENT);
CMD(set_noack_map, SET_NOACK_MAP);
@@ -1821,6 +1822,11 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
nla_put_flag(msg, NL80211_ATTR_WIPHY_SELF_MANAGED_REG))
goto nla_put_failure;
+ if (rdev->wiphy.max_sched_scan_reqs &&
+ nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+ rdev->wiphy.max_sched_scan_reqs))
+ goto nla_put_failure;
+
if (nla_put(msg, NL80211_ATTR_EXT_FEATURES,
sizeof(rdev->wiphy.ext_features),
rdev->wiphy.ext_features))
@@ -7272,14 +7278,16 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
struct net_device *dev = info->user_ptr[1];
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_sched_scan_request *sched_scan_req;
+ bool want_multi;
int err;
- if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
- !rdev->ops->sched_scan_start)
+ if (!rdev->wiphy.max_sched_scan_reqs || !rdev->ops->sched_scan_start)
return -EOPNOTSUPP;
- if (rdev->sched_scan_req)
- return -EINPROGRESS;
+ want_multi = info->attrs[NL80211_ATTR_SCHED_SCAN_MULTI];
+ err = cfg80211_sched_scan_req_possible(rdev, want_multi);
+ if (err)
+ return err;
sched_scan_req = nl80211_parse_sched_scan(&rdev->wiphy, wdev,
info->attrs,
@@ -7289,6 +7297,14 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
if (err)
goto out_err;
+ /* leave request id zero for legacy request
+ * or if driver does not support multi-scheduled scan
+ */
+ if (want_multi && rdev->wiphy.max_sched_scan_reqs > 1) {
+ while (!sched_scan_req->reqid)
+ sched_scan_req->reqid = rdev->wiphy.cookie_counter++;
+ }
+
err = rdev_sched_scan_start(rdev, dev, sched_scan_req);
if (err)
goto out_free;
@@ -7299,7 +7315,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
if (info->attrs[NL80211_ATTR_SOCKET_OWNER])
sched_scan_req->owner_nlportid = info->snd_portid;
- rcu_assign_pointer(rdev->sched_scan_req, sched_scan_req);
+ cfg80211_add_sched_scan_req(rdev, sched_scan_req);
nl80211_send_sched_scan(sched_scan_req, NL80211_CMD_START_SCHED_SCAN);
return 0;
@@ -7313,13 +7329,27 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
static int nl80211_stop_sched_scan(struct sk_buff *skb,
struct genl_info *info)
{
+ struct cfg80211_sched_scan_request *req;
struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ u64 cookie;
- if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
- !rdev->ops->sched_scan_stop)
+ if (!rdev->wiphy.max_sched_scan_reqs || !rdev->ops->sched_scan_stop)
return -EOPNOTSUPP;
- return __cfg80211_stop_sched_scan(rdev, false);
+ if (info->attrs[NL80211_ATTR_COOKIE]) {
+ cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
+ return __cfg80211_stop_sched_scan(rdev, cookie, false);
+ } else {
+ req = list_first_or_null_rcu(&rdev->sched_scan_req_list,
+ struct cfg80211_sched_scan_request,
+ list);
+ if (!req || req->reqid ||
+ (req->owner_nlportid &&
+ req->owner_nlportid != info->snd_portid))
+ return -ENOENT;
+
+ return cfg80211_stop_sched_scan_req(rdev, req, false);
+ }
}
static int nl80211_start_radar_detection(struct sk_buff *skb,
@@ -14754,7 +14784,7 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
sched_scan_req->owner_nlportid = 0;
if (rdev->ops->sched_scan_stop &&
- rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN)
+ rdev->wiphy.max_sched_scan_reqs)
schedule_work(&rdev->sched_scan_stop_wk);
}
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index f2baf59..33d79ff 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -814,7 +814,7 @@ static inline int rdev_get_antenna(struct cfg80211_registered_device *rdev,
struct cfg80211_sched_scan_request *request)
{
int ret;
- trace_rdev_sched_scan_start(&rdev->wiphy, dev, request);
+ trace_rdev_sched_scan_start(&rdev->wiphy, dev, request->reqid);
ret = rdev->ops->sched_scan_start(&rdev->wiphy, dev, request);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 6f4996c..1c7dcf4 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -300,6 +300,70 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request,
}
EXPORT_SYMBOL(cfg80211_scan_done);
+void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev,
+ struct cfg80211_sched_scan_request *req)
+{
+ ASSERT_RTNL();
+
+ list_add_rcu(&req->list, &rdev->sched_scan_req_list);
+}
+
+static void cfg80211_del_sched_scan_req(struct cfg80211_registered_device *rdev,
+ struct cfg80211_sched_scan_request *req)
+{
+ ASSERT_RTNL();
+
+ list_del_rcu(&req->list);
+ kfree_rcu(req, rcu_head);
+}
+
+static struct cfg80211_sched_scan_request *
+cfg80211_find_sched_scan_req(struct cfg80211_registered_device *rdev, u64 reqid)
+{
+ struct cfg80211_sched_scan_request *pos;
+
+ ASSERT_RTNL();
+
+ list_for_each_entry(pos, &rdev->sched_scan_req_list, list) {
+ if (pos->reqid == reqid)
+ return pos;
+ }
+ return ERR_PTR(-ENOENT);
+}
+
+/*
+ * Determines if a scheduled scan request can be handled. When a legacy
+ * scheduled scan is running no other scheduled scan is allowed regardless
+ * whether the request is for legacy or multi-support scan. When a multi-support
+ * scheduled scan is running a request for legacy scan is not allowed. In this
+ * case a request for multi-support scan can be handled if resources are
+ * available, ie. struct wiphy::max_sched_scan_reqs limit is not yet reached.
+ */
+int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev,
+ bool want_multi)
+{
+ struct cfg80211_sched_scan_request *pos;
+ int i = 0;
+
+ list_for_each_entry(pos, &rdev->sched_scan_req_list, list) {
+ /* request id zero means legacy in progress */
+ if (!i && !pos->reqid)
+ return -EINPROGRESS;
+ i++;
+ }
+
+ if (i) {
+ /* no legacy allowed when multi request(s) are active */
+ if (!want_multi)
+ return -EINPROGRESS;
+
+ /* resource limit reached */
+ if (i == rdev->wiphy.max_sched_scan_reqs)
+ return -ENOSPC;
+ }
+ return 0;
+}
+
void __cfg80211_sched_scan_results(struct work_struct *wk)
{
struct cfg80211_registered_device *rdev;
@@ -346,7 +410,7 @@ void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy)
trace_cfg80211_sched_scan_stopped(wiphy);
- __cfg80211_stop_sched_scan(rdev, true);
+ __cfg80211_stop_sched_scan(rdev, 0, true);
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped_rtnl);
@@ -358,34 +422,40 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
-int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
- bool driver_initiated)
+int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev,
+ struct cfg80211_sched_scan_request *req,
+ bool driver_initiated)
{
- struct cfg80211_sched_scan_request *sched_scan_req;
- struct net_device *dev;
-
ASSERT_RTNL();
- if (!rdev->sched_scan_req)
- return -ENOENT;
-
- sched_scan_req = rtnl_dereference(rdev->sched_scan_req);
- dev = sched_scan_req->dev;
-
if (!driver_initiated) {
- int err = rdev_sched_scan_stop(rdev, dev);
+ int err = rdev_sched_scan_stop(rdev, req->dev);
if (err)
return err;
}
- nl80211_send_sched_scan(sched_scan_req, NL80211_CMD_SCHED_SCAN_STOPPED);
+ nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_STOPPED);
- RCU_INIT_POINTER(rdev->sched_scan_req, NULL);
- kfree_rcu(sched_scan_req, rcu_head);
+ cfg80211_del_sched_scan_req(rdev, req);
return 0;
}
+int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
+ u64 reqid, bool driver_initiated)
+{
+ struct cfg80211_sched_scan_request *sched_scan_req;
+
+ ASSERT_RTNL();
+
+ sched_scan_req = cfg80211_find_sched_scan_req(rdev, reqid);
+ if (IS_ERR(sched_scan_req))
+ return PTR_ERR(sched_scan_req);
+
+ return cfg80211_stop_sched_scan_req(rdev, sched_scan_req,
+ driver_initiated);
+}
+
void cfg80211_bss_age(struct cfg80211_registered_device *rdev,
unsigned long age_secs)
{
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index fd55786..52935c4 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1610,20 +1610,26 @@
TP_ARGS(wiphy, rx, tx)
);
-TRACE_EVENT(rdev_sched_scan_start,
- TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
- struct cfg80211_sched_scan_request *request),
- TP_ARGS(wiphy, netdev, request),
+DECLARE_EVENT_CLASS(wiphy_netdev_id_evt,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u64 id),
+ TP_ARGS(wiphy, netdev, id),
TP_STRUCT__entry(
WIPHY_ENTRY
NETDEV_ENTRY
+ __field(u64, id)
),
TP_fast_assign(
WIPHY_ASSIGN;
NETDEV_ASSIGN;
+ __entry->id = id;
),
- TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT,
- WIPHY_PR_ARG, NETDEV_PR_ARG)
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", id: %llu",
+ WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->id)
+);
+
+DEFINE_EVENT(wiphy_netdev_id_evt, rdev_sched_scan_start,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, u64 id),
+ TP_ARGS(wiphy, netdev, id)
);
TRACE_EVENT(rdev_tdls_mgmt,
--
1.9.1
^ permalink raw reply related
* [RFC V3 1/5] nl80211: add request id in scheduled scan event messages
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
In-Reply-To: <1487155049-1892-1-git-send-email-arend.vanspriel@broadcom.com>
For multi-scheduled scan support in subsequent patch a request id
will be added. This patch add this request id to the scheduled
scan event messages. For now the request id will always be zero.
With multi-scheduled scan its value will inform user-space to which
scan the event relates.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
include/net/cfg80211.h | 2 ++
net/wireless/nl80211.c | 23 +++++++++++------------
net/wireless/nl80211.h | 3 +--
net/wireless/scan.c | 5 ++---
4 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 86c12f8..571be46 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1641,6 +1641,7 @@ struct cfg80211_bss_select_adjust {
/**
* struct cfg80211_sched_scan_request - scheduled scan request description
*
+ * @reqid: identifies this request.
* @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
* @n_ssids: number of SSIDs
* @n_channels: total number of channels to scan
@@ -1685,6 +1686,7 @@ struct cfg80211_bss_select_adjust {
* comparisions.
*/
struct cfg80211_sched_scan_request {
+ u64 reqid;
struct cfg80211_ssid *ssids;
int n_ssids;
u32 n_channels;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d516527..3721051 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7301,8 +7301,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
rcu_assign_pointer(rdev->sched_scan_req, sched_scan_req);
- nl80211_send_sched_scan(rdev, dev,
- NL80211_CMD_START_SCHED_SCAN);
+ nl80211_send_sched_scan(sched_scan_req, NL80211_CMD_START_SCHED_SCAN);
return 0;
out_free:
@@ -13086,18 +13085,19 @@ static int nl80211_prep_scan_msg(struct sk_buff *msg,
static int
nl80211_prep_sched_scan_msg(struct sk_buff *msg,
- struct cfg80211_registered_device *rdev,
- struct net_device *netdev,
- u32 portid, u32 seq, int flags, u32 cmd)
+ struct cfg80211_sched_scan_request *req, u32 cmd)
{
void *hdr;
- hdr = nl80211hdr_put(msg, portid, seq, flags, cmd);
+ hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr)
return -1;
- if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
- nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex))
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY,
+ wiphy_to_rdev(req->wiphy)->wiphy_idx) ||
+ nla_put_u32(msg, NL80211_ATTR_IFINDEX, req->dev->ifindex) ||
+ nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, req->reqid,
+ NL80211_ATTR_PAD))
goto nla_put_failure;
genlmsg_end(msg, hdr);
@@ -13157,8 +13157,7 @@ void nl80211_send_scan_msg(struct cfg80211_registered_device *rdev,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
-void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 cmd)
+void nl80211_send_sched_scan(struct cfg80211_sched_scan_request *req, u32 cmd)
{
struct sk_buff *msg;
@@ -13166,12 +13165,12 @@ void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
if (!msg)
return;
- if (nl80211_prep_sched_scan_msg(msg, rdev, netdev, 0, 0, 0, cmd) < 0) {
+ if (nl80211_prep_sched_scan_msg(msg, req, cmd) < 0) {
nlmsg_free(msg);
return;
}
- genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
+ genlmsg_multicast_netns(&nl80211_fam, wiphy_net(req->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index e488dca..eb66de6 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -16,8 +16,7 @@ struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, bool aborted);
void nl80211_send_scan_msg(struct cfg80211_registered_device *rdev,
struct sk_buff *msg);
-void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 cmd);
+void nl80211_send_sched_scan(struct cfg80211_sched_scan_request *req, u32 cmd);
void nl80211_common_reg_change_event(enum nl80211_commands cmd_id,
struct regulatory_request *request);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 21be56b..6f4996c 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -321,8 +321,7 @@ void __cfg80211_sched_scan_results(struct work_struct *wk)
spin_unlock_bh(&rdev->bss_lock);
request->scan_start = jiffies;
}
- nl80211_send_sched_scan(rdev, request->dev,
- NL80211_CMD_SCHED_SCAN_RESULTS);
+ nl80211_send_sched_scan(request, NL80211_CMD_SCHED_SCAN_RESULTS);
}
rtnl_unlock();
@@ -379,7 +378,7 @@ int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
return err;
}
- nl80211_send_sched_scan(rdev, dev, NL80211_CMD_SCHED_SCAN_STOPPED);
+ nl80211_send_sched_scan(sched_scan_req, NL80211_CMD_SCHED_SCAN_STOPPED);
RCU_INIT_POINTER(rdev->sched_scan_req, NULL);
kfree_rcu(sched_scan_req, rcu_head);
--
1.9.1
^ permalink raw reply related
* [RFC V3 0/5] cfg80211: support multiple scheduled scans
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
Another review round for multiple scheduled scan support in nl80211.
The patches apply to master branch of mac80211-next repository.
changelog:
V3:
- addressed comments on "nl80211: allow multiple active scheduled scan requests"
- reordered first two patches.
Arend van Spriel (5):
nl80211: add request id in scheduled scan event messages
nl80211: allow multiple active scheduled scan requests
cfg80211: add request id parameter to .sched_scan_stop() signature
cfg80211: add request id to cfg80211_sched_scan_results() api
cfg80211: add request id in cfg80211_sched_scan_stopped{,_rtnl}() api
drivers/net/wireless/ath/ath6kl/cfg80211.c | 6 +-
drivers/net/wireless/ath/ath6kl/wmi.c | 2 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 12 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +-
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +-
drivers/net/wireless/marvell/mwifiex/main.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_event.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_ioctl.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 2 +-
include/net/cfg80211.h | 34 +++--
include/uapi/linux/nl80211.h | 12 +-
net/mac80211/cfg.c | 3 +-
net/mac80211/pm.c | 2 +-
net/mac80211/scan.c | 4 +-
net/mac80211/util.c | 2 +-
net/wireless/core.c | 27 ++--
net/wireless/core.h | 11 +-
net/wireless/nl80211.c | 75 +++++++----
net/wireless/nl80211.h | 3 +-
net/wireless/rdev-ops.h | 8 +-
net/wireless/scan.c | 141 +++++++++++++++------
net/wireless/trace.h | 54 +++++---
23 files changed, 286 insertions(+), 132 deletions(-)
--
1.9.1
^ permalink raw reply
* [RFC V3 4/5] cfg80211: add request id to cfg80211_sched_scan_results() api
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
In-Reply-To: <1487155049-1892-1-git-send-email-arend.vanspriel@broadcom.com>
Have proper request id filled in the SCHED_SCAN_RESULTS notification
toward user-space by having the driver provide it through the api.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
drivers/net/wireless/ath/ath6kl/wmi.c | 2 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c | 2 +-
include/net/cfg80211.h | 4 ++-
net/mac80211/scan.c | 2 +-
net/wireless/core.c | 1 -
net/wireless/core.h | 1 -
net/wireless/nl80211.c | 2 ++
net/wireless/scan.c | 30 +++++++++++-----------
net/wireless/trace.h | 17 +++++++++---
10 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 84a6d12..04df853 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1082,7 +1082,7 @@ void ath6kl_wmi_sscan_timer(unsigned long ptr)
{
struct ath6kl_vif *vif = (struct ath6kl_vif *) ptr;
- cfg80211_sched_scan_results(vif->ar->wiphy);
+ cfg80211_sched_scan_results(vif->ar->wiphy, 0);
}
static int ath6kl_wmi_bssinfo_event_rx(struct wmi *wmi, u8 *datap, int len,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index b219123..b1ff93c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -764,7 +764,7 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
brcmf_dbg(SCAN, "scheduled scan completed\n");
cfg->internal_escan = false;
if (!aborted)
- cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
+ cfg80211_sched_scan_results(cfg_to_wiphy(cfg), 0);
} else if (scan_request) {
struct cfg80211_scan_info info = {
.aborted = aborted,
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c b/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
index 8548027..12b471f 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
@@ -1201,7 +1201,7 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
break;
case HostCmd_CMD_802_11_BG_SCAN_QUERY:
ret = mwifiex_ret_802_11_scan(priv, resp);
- cfg80211_sched_scan_results(priv->wdev.wiphy);
+ cfg80211_sched_scan_results(priv->wdev.wiphy, 0);
mwifiex_dbg(adapter, CMD,
"info: CMD_RESP: BG_SCAN result is ready!\n");
break;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6e07ec8..e7a74e9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1710,6 +1710,7 @@ struct cfg80211_sched_scan_request {
struct cfg80211_bss_select_adjust rssi_adjust;
/* internal */
+ struct work_struct results_wk;
struct wiphy *wiphy;
struct net_device *dev;
unsigned long scan_start;
@@ -4515,8 +4516,9 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request,
* cfg80211_sched_scan_results - notify that new scan results are available
*
* @wiphy: the wiphy which got scheduled scan results
+ * @reqid: identifier for the related scheduled scan request
*/
-void cfg80211_sched_scan_results(struct wiphy *wiphy);
+void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index faab3c4..3fd8757 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -1219,7 +1219,7 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw)
trace_api_sched_scan_results(local);
- cfg80211_sched_scan_results(hw->wiphy);
+ cfg80211_sched_scan_results(hw->wiphy, 0);
}
EXPORT_SYMBOL(ieee80211_sched_scan_results);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 79b73d9..0ce87e4 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -442,7 +442,6 @@ struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
INIT_LIST_HEAD(&rdev->bss_list);
INIT_LIST_HEAD(&rdev->sched_scan_req_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
- INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
INIT_LIST_HEAD(&rdev->mlme_unreg);
spin_lock_init(&rdev->mlme_unreg_lock);
INIT_WORK(&rdev->mlme_unreg_wk, cfg80211_mlme_unreg_wk);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 111bff1..e9afbc7 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -78,7 +78,6 @@ struct cfg80211_registered_device {
struct cfg80211_sched_scan_request __rcu *sched_scan_req;
unsigned long suspend_at;
struct work_struct scan_done_wk;
- struct work_struct sched_scan_results_wk;
struct genl_info *cur_cmd_info;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 37c75db..de2b241 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7297,6 +7297,8 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
if (err)
goto out_err;
+ INIT_WORK(&sched_scan_req->results_wk, __cfg80211_sched_scan_results);
+
/* leave request id zero for legacy request
* or if driver does not support multi-scheduled scan
*/
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index abe9b42..a6c8d0e 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -367,38 +367,38 @@ int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev,
void __cfg80211_sched_scan_results(struct work_struct *wk)
{
struct cfg80211_registered_device *rdev;
- struct cfg80211_sched_scan_request *request;
+ struct cfg80211_sched_scan_request *req;
- rdev = container_of(wk, struct cfg80211_registered_device,
- sched_scan_results_wk);
+ req = container_of(wk, struct cfg80211_sched_scan_request, results_wk);
+ rdev = wiphy_to_rdev(req->wiphy);
rtnl_lock();
- request = rtnl_dereference(rdev->sched_scan_req);
-
/* we don't have sched_scan_req anymore if the scan is stopping */
- if (request) {
- if (request->flags & NL80211_SCAN_FLAG_FLUSH) {
+ if (req) {
+ if (req->flags & NL80211_SCAN_FLAG_FLUSH) {
/* flush entries from previous scans */
spin_lock_bh(&rdev->bss_lock);
- __cfg80211_bss_expire(rdev, request->scan_start);
+ __cfg80211_bss_expire(rdev, req->scan_start);
spin_unlock_bh(&rdev->bss_lock);
- request->scan_start = jiffies;
+ req->scan_start = jiffies;
}
- nl80211_send_sched_scan(request, NL80211_CMD_SCHED_SCAN_RESULTS);
+ nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_RESULTS);
}
rtnl_unlock();
}
-void cfg80211_sched_scan_results(struct wiphy *wiphy)
+void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid)
{
- trace_cfg80211_sched_scan_results(wiphy);
+ struct cfg80211_sched_scan_request *request;
+
+ trace_cfg80211_sched_scan_results(wiphy, reqid);
/* ignore if we're not scanning */
- if (rcu_access_pointer(wiphy_to_rdev(wiphy)->sched_scan_req))
- queue_work(cfg80211_wq,
- &wiphy_to_rdev(wiphy)->sched_scan_results_wk);
+ request = cfg80211_find_sched_scan_req(wiphy_to_rdev(wiphy), reqid);
+ if (!IS_ERR(request))
+ queue_work(cfg80211_wq, &request->results_wk);
}
EXPORT_SYMBOL(cfg80211_sched_scan_results);
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 8d8f6b4..55558d0 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2820,14 +2820,23 @@
MAC_PR_ARG(tsf_bssid))
);
-DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_results,
+DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_stopped,
TP_PROTO(struct wiphy *wiphy),
TP_ARGS(wiphy)
);
-DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_stopped,
- TP_PROTO(struct wiphy *wiphy),
- TP_ARGS(wiphy)
+TRACE_EVENT(cfg80211_sched_scan_results,
+ TP_PROTO(struct wiphy *wiphy, u64 id),
+ TP_ARGS(wiphy, id),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ __field(u64, id)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ __entry->id = id;
+ ),
+ TP_printk(WIPHY_PR_FMT ", id: %llu", WIPHY_PR_ARG, __entry->id)
);
TRACE_EVENT(cfg80211_get_bss,
--
1.9.1
^ permalink raw reply related
* [RFC V3 5/5] cfg80211: add request id in cfg80211_sched_scan_stopped{,_rtnl}() api
From: Arend van Spriel @ 2017-02-15 10:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, Arend van Spriel
In-Reply-To: <1487155049-1892-1-git-send-email-arend.vanspriel@broadcom.com>
Allow driver to indicate which scheduled scan request is being aborted
by providing the request id.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 2 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +-
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 6 +++---
drivers/net/wireless/marvell/mwifiex/main.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_event.c | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_ioctl.c | 2 +-
include/net/cfg80211.h | 6 ++++--
net/mac80211/pm.c | 2 +-
net/mac80211/scan.c | 2 +-
net/mac80211/util.c | 2 +-
net/wireless/scan.c | 10 +++++-----
net/wireless/trace.h | 17 +++++++++++------
12 files changed, 31 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index bcc6e24..940c8812 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -170,7 +170,7 @@ static void ath6kl_cfg80211_sscan_disable(struct ath6kl_vif *vif)
if (!stopped)
return;
- cfg80211_sched_scan_stopped(ar->wiphy);
+ cfg80211_sched_scan_stopped(ar->wiphy, 0);
}
static int ath6kl_set_wpa_version(struct ath6kl_vif *vif,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index b1ff93c..9025ea6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3356,7 +3356,7 @@ static int brcmf_start_internal_escan(struct brcmf_if *ifp,
goto free_req;
out_err:
- cfg80211_sched_scan_stopped(wiphy);
+ cfg80211_sched_scan_stopped(wiphy, 0);
free_req:
kfree(request);
return err;
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 91c71066..d7dd58b 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -2036,7 +2036,7 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
if (!mwifiex_stop_bg_scan(priv))
- cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy, 0);
if (mwifiex_deauthenticate(priv, NULL))
return -EFAULT;
@@ -2304,7 +2304,7 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
(int)sme->ssid_len, (char *)sme->ssid, sme->bssid);
if (!mwifiex_stop_bg_scan(priv))
- cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy, 0);
ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid,
priv->bss_mode, sme->channel, sme, 0);
@@ -2513,7 +2513,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv,
priv->scan_block = false;
if (!mwifiex_stop_bg_scan(priv))
- cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped_rtnl(priv->wdev.wiphy, 0);
user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL);
if (!user_scan_cfg)
diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index 9d80180..80321d5 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -744,7 +744,7 @@ static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter,
mwifiex_dbg(priv->adapter, INFO,
"aborting bgscan on ndo_stop\n");
mwifiex_stop_bg_scan(priv);
- cfg80211_sched_scan_stopped(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
}
return 0;
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_event.c b/drivers/net/wireless/marvell/mwifiex/sta_event.c
index d63d163..000cb39 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_event.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_event.c
@@ -793,7 +793,7 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
case EVENT_BG_SCAN_STOPPED:
dev_dbg(adapter->dev, "event: BGS_STOPPED\n");
- cfg80211_sched_scan_stopped(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
if (priv->sched_scanning)
priv->sched_scanning = false;
break;
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
index 1532ac9..42997e0 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
@@ -560,7 +560,7 @@ int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
#endif
mwifiex_dbg(adapter, CMD, "aborting bgscan!\n");
mwifiex_stop_bg_scan(priv);
- cfg80211_sched_scan_stopped(priv->wdev.wiphy);
+ cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
#ifdef CONFIG_PM
}
#endif
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e7a74e9..1b56496 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4524,24 +4524,26 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request,
* cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
*
* @wiphy: the wiphy on which the scheduled scan stopped
+ * @reqid: identifier for the related scheduled scan request
*
* The driver can call this function to inform cfg80211 that the
* scheduled scan had to be stopped, for whatever reason. The driver
* is then called back via the sched_scan_stop operation when done.
*/
-void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_sched_scan_stopped_rtnl - notify that the scheduled scan has stopped
*
* @wiphy: the wiphy on which the scheduled scan stopped
+ * @reqid: identifier for the related scheduled scan request
*
* The driver can call this function to inform cfg80211 that the
* scheduled scan had to be stopped, for whatever reason. The driver
* is then called back via the sched_scan_stop operation when done.
* This function should be called with rtnl locked.
*/
-void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy);
+void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid);
/**
* cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 28a3a09..d37de3f 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -10,7 +10,7 @@ static void ieee80211_sched_scan_cancel(struct ieee80211_local *local)
{
if (ieee80211_request_sched_scan_stop(local))
return;
- cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy);
+ cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy, 0);
}
int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 3fd8757..94be10e 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -1239,7 +1239,7 @@ void ieee80211_sched_scan_end(struct ieee80211_local *local)
mutex_unlock(&local->mtx);
- cfg80211_sched_scan_stopped(local->hw.wiphy);
+ cfg80211_sched_scan_stopped(local->hw.wiphy, 0);
}
void ieee80211_sched_scan_stopped_work(struct work_struct *work)
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index ac59fbd..616d55d 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2103,7 +2103,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
mutex_unlock(&local->mtx);
if (sched_scan_stopped)
- cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy);
+ cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy, 0);
wake_up:
if (local->in_reconfig) {
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index a6c8d0e..0c2ba39 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -402,22 +402,22 @@ void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid)
}
EXPORT_SYMBOL(cfg80211_sched_scan_results);
-void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy)
+void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
- trace_cfg80211_sched_scan_stopped(wiphy);
+ trace_cfg80211_sched_scan_stopped(wiphy, reqid);
- __cfg80211_stop_sched_scan(rdev, 0, true);
+ __cfg80211_stop_sched_scan(rdev, reqid, true);
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped_rtnl);
-void cfg80211_sched_scan_stopped(struct wiphy *wiphy)
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid)
{
rtnl_lock();
- cfg80211_sched_scan_stopped_rtnl(wiphy);
+ cfg80211_sched_scan_stopped_rtnl(wiphy, reqid);
rtnl_unlock();
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 55558d0..ca8b205 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2820,12 +2820,7 @@
MAC_PR_ARG(tsf_bssid))
);
-DEFINE_EVENT(wiphy_only_evt, cfg80211_sched_scan_stopped,
- TP_PROTO(struct wiphy *wiphy),
- TP_ARGS(wiphy)
-);
-
-TRACE_EVENT(cfg80211_sched_scan_results,
+DECLARE_EVENT_CLASS(wiphy_id_evt,
TP_PROTO(struct wiphy *wiphy, u64 id),
TP_ARGS(wiphy, id),
TP_STRUCT__entry(
@@ -2839,6 +2834,16 @@
TP_printk(WIPHY_PR_FMT ", id: %llu", WIPHY_PR_ARG, __entry->id)
);
+DEFINE_EVENT(wiphy_id_evt, cfg80211_sched_scan_stopped,
+ TP_PROTO(struct wiphy *wiphy, u64 id),
+ TP_ARGS(wiphy, id)
+);
+
+DEFINE_EVENT(wiphy_id_evt, cfg80211_sched_scan_results,
+ TP_PROTO(struct wiphy *wiphy, u64 id),
+ TP_ARGS(wiphy, id)
+);
+
TRACE_EVENT(cfg80211_get_bss,
TP_PROTO(struct wiphy *wiphy, struct ieee80211_channel *channel,
const u8 *bssid, const u8 *ssid, size_t ssid_len,
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox