* [PATCH 1/2] mac80211: add tx dequeue function for process context
From: Erik Stromdahl @ 2019-06-17 20:01 UTC (permalink / raw)
To: johannes, kvalo, davem, linux-wireless, ath10k, linux-kernel
Cc: Erik Stromdahl
Since ieee80211_tx_dequeue() must not be called with softirqs enabled
(i.e. from process context without proper disable of bottom halves),
we add a wrapper that disables bottom halves before calling
ieee80211_tx_dequeue()
The new function is named ieee80211_tx_dequeue_ni() just as all other
from-process-context versions found in mac80211.
The documentation of ieee80211_tx_dequeue() is also updated so it
mentions that the function should not be called from process context.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
include/net/mac80211.h | 26 ++++++++++++++++++++++++++
net/mac80211/tx.c | 2 ++
2 files changed, 28 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 72080d9d617e..c47990d8db79 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6251,10 +6251,36 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
* but for the duration of the frame handling.
* However, also note that while in the wake_tx_queue() method,
* rcu_read_lock() is already held.
+ *
+ * softirqs must also be disabled when this function is called.
+ * In process context, use ieee80211_tx_dequeue_ni() instead.
*/
struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
struct ieee80211_txq *txq);
+/**
+ * ieee80211_tx_dequeue_ni - dequeue a packet from a software tx queue
+ * (in process context)
+ *
+ * Like ieee80211_tx_dequeue() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface, or from
+ * ieee80211_next_txq()
+ */
+static inline struct sk_buff *ieee80211_tx_dequeue_ni(struct ieee80211_hw *hw,
+ struct ieee80211_txq *txq)
+{
+ struct sk_buff *skb;
+
+ local_bh_disable();
+ skb = ieee80211_tx_dequeue(hw, txq);
+ local_bh_enable();
+
+ return skb;
+}
+
/**
* ieee80211_next_txq - get next tx queue to pull packets from
*
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index dd220b977025..4bd0066ea7cd 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3550,6 +3550,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
ieee80211_tx_result r;
struct ieee80211_vif *vif = txq->vif;
+ WARN_ON_ONCE(softirq_count() == 0);
+
begin:
spin_lock_bh(&fq->lock);
--
2.22.0
^ permalink raw reply related
* Re: [PATCH v3 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
From: Randy Dunlap @ 2019-06-17 22:47 UTC (permalink / raw)
To: Alastair D'Silva, alastair
Cc: Jani Nikula, Joonas Lahtinen, Rodrigo Vivi, David Airlie,
Daniel Vetter, Dan Carpenter, Karsten Keil, Jassi Brar,
Tom Lendacky, David S. Miller, Jose Abreu, Kalle Valo,
Stanislaw Gruszka, Benson Leung, Enric Balletbo i Serra,
James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman,
Alexander Viro, Petr Mladek, Sergey Senozhatsky, Steven Rostedt,
David Laight, Andrew Morton, intel-gfx, dri-devel, linux-kernel,
netdev, ath10k, linux-wireless, linux-scsi, linux-fbdev, devel,
linux-fsdevel
In-Reply-To: <20190617020430.8708-3-alastair@au1.ibm.com>
Hi,
Just a comment style nit below...
On 6/16/19 7:04 PM, Alastair D'Silva wrote:
> From: Alastair D'Silva <alastair@d-silva.org>
>
> This patch removes the hardcoded row limits and allows for
> other lengths. These lengths must still be a multiple of
> groupsize.
>
> This allows structs that are not 16/32 bytes to display on
> a single line.
>
> This patch also expands the self-tests to test row sizes
> up to 64 bytes (though they can now be arbitrarily long).
>
> Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> ---
> lib/hexdump.c | 48 ++++++++++++++++++++++++++++--------------
> lib/test_hexdump.c | 52 ++++++++++++++++++++++++++++++++++++++--------
> 2 files changed, 75 insertions(+), 25 deletions(-)
>
> diff --git a/lib/hexdump.c b/lib/hexdump.c
> index 81b70ed37209..3943507bc0e9 100644
> --- a/lib/hexdump.c
> +++ b/lib/hexdump.c
> @@ -246,17 +248,29 @@ void print_hex_dump(const char *level, const char *prefix_str, int prefix_type,
> {
> const u8 *ptr = buf;
> int i, linelen, remaining = len;
> - unsigned char linebuf[32 * 3 + 2 + 32 + 1];
> + unsigned char *linebuf;
> + unsigned int linebuf_len;
>
> - if (rowsize != 16 && rowsize != 32)
> - rowsize = 16;
> + if (rowsize % groupsize)
> + rowsize -= rowsize % groupsize;
> +
> + /* Worst case line length:
> + * 2 hex chars + space per byte in, 2 spaces, 1 char per byte in, NULL
> + */
According to Documentation/process/coding-style.rst:
The preferred style for long (multi-line) comments is:
.. code-block:: c
/*
* This is the preferred style for multi-line
* comments in the Linux kernel source code.
* Please use it consistently.
*
* Description: A column of asterisks on the left side,
* with beginning and ending almost-blank lines.
*/
except in networking software.
> + linebuf_len = rowsize * 3 + 2 + rowsize + 1;
> + linebuf = kzalloc(linebuf_len, GFP_KERNEL);
> + if (!linebuf) {
> + printk("%s%shexdump: Could not alloc %u bytes for buffer\n",
> + level, prefix_str, linebuf_len);
> + return;
> + }
--
~Randy
^ permalink raw reply
* Re: [PATCH v3 2/7] lib/hexdump.c: Relax rowsize checks in hex_dump_to_buffer
From: Alastair D'Silva @ 2019-06-18 0:57 UTC (permalink / raw)
To: Randy Dunlap
Cc: Jani Nikula, Joonas Lahtinen, Rodrigo Vivi, David Airlie,
Daniel Vetter, Dan Carpenter, Karsten Keil, Jassi Brar,
Tom Lendacky, David S. Miller, Jose Abreu, Kalle Valo,
Stanislaw Gruszka, Benson Leung, Enric Balletbo i Serra,
James E.J. Bottomley, Martin K. Petersen, Greg Kroah-Hartman,
Alexander Viro, Petr Mladek, Sergey Senozhatsky, Steven Rostedt,
David Laight, Andrew Morton, intel-gfx, dri-devel, linux-kernel,
netdev, ath10k, linux-wireless, linux-scsi, linux-fbdev, devel,
linux-fsdevel
In-Reply-To: <94413756-c927-a4ca-dd59-47e3cc87d58d@infradead.org>
On Mon, 2019-06-17 at 15:47 -0700, Randy Dunlap wrote:
> Hi,
> Just a comment style nit below...
>
> On 6/16/19 7:04 PM, Alastair D'Silva wrote:
> > From: Alastair D'Silva <alastair@d-silva.org>
> >
> > This patch removes the hardcoded row limits and allows for
> > other lengths. These lengths must still be a multiple of
> > groupsize.
> >
> > This allows structs that are not 16/32 bytes to display on
> > a single line.
> >
> > This patch also expands the self-tests to test row sizes
> > up to 64 bytes (though they can now be arbitrarily long).
> >
> > Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
> > ---
> > lib/hexdump.c | 48 ++++++++++++++++++++++++++++--------------
> > lib/test_hexdump.c | 52 ++++++++++++++++++++++++++++++++++++++--
> > ------
> > 2 files changed, 75 insertions(+), 25 deletions(-)
> >
> > diff --git a/lib/hexdump.c b/lib/hexdump.c
> > index 81b70ed37209..3943507bc0e9 100644
> > --- a/lib/hexdump.c
> > +++ b/lib/hexdump.c
> > @@ -246,17 +248,29 @@ void print_hex_dump(const char *level, const
> > char *prefix_str, int prefix_type,
> > {
> > const u8 *ptr = buf;
> > int i, linelen, remaining = len;
> > - unsigned char linebuf[32 * 3 + 2 + 32 + 1];
> > + unsigned char *linebuf;
> > + unsigned int linebuf_len;
> >
> > - if (rowsize != 16 && rowsize != 32)
> > - rowsize = 16;
> > + if (rowsize % groupsize)
> > + rowsize -= rowsize % groupsize;
> > +
> > + /* Worst case line length:
> > + * 2 hex chars + space per byte in, 2 spaces, 1 char per byte
> > in, NULL
> > + */
>
> According to Documentation/process/coding-style.rst:
>
> The preferred style for long (multi-line) comments is:
>
> .. code-block:: c
>
> /*
> * This is the preferred style for multi-line
> * comments in the Linux kernel source code.
> * Please use it consistently.
> *
> * Description: A column of asterisks on the left side,
> * with beginning and ending almost-blank lines.
> */
>
Thanks Randy, I'll address this.
--
Alastair D'Silva mob: 0423 762 819
skype: alastair_dsilva
Twitter: @EvilDeece
blog: http://alastair.d-silva.org
^ permalink raw reply
* Klientskie bazy. Email: prodawez@armyspy.com Uznajte podrobnee.
From: ImPXlinux-wireless @ 2019-06-18 0:43 UTC (permalink / raw)
To: linux-wireless
Klientskie bazy. Email: prodawez@armyspy.com Uznajte podrobnee.
^ permalink raw reply
* [PATCHv6 2/9] nl80211: Add new netlink attribute for TID speicific retry count
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
This patch introduced below NL attributes to add support for
configuring data TID specific retry count
NL80211_TID_ATTR_CONFIG_RETRY
NL80211_TID_ATTR_CONFIG_RETRY_LONG
NL80211_TID_ATTR_CONFIG_RETRY_SHORT
These attributes are added in NL80211_ATTR_TID_CONFIG nested attribute.
This will be useful for the driver which supports data TID specific retry
count configuration rather using phy level retry configuration.
This TID specific retry configuration will have more precedence than
phy level configuration. This configuration can be applied for a
specific peer. To apply this configuration specific to a peer
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver should advertise WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT and
max_data_retry_count value to notify user space to avoid of passing
greater than the allowed limit.
Driver supporting TID specific retry configuration should advertise
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and per STA specific
data TID retry configuration should advertise
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 11 ++++++++++
include/uapi/linux/nl80211.h | 48 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/nl80211.c | 44 ++++++++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index af5d684..91bcb07 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -527,6 +527,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
+ IEEE80211_TID_CONF_RETRY = BIT(1),
};
/**
@@ -535,11 +536,15 @@ enum ieee80211_tid_conf_mask {
* @tid_conf_mask: bitmap indicating which parameter changed
* see %enum ieee80211_tid_conf_mask
* @noack: noack configuration value for the TID
+ * @retry_long: retry count value
+ * @retry_short: retry count value
*/
struct ieee80211_tid_cfg {
u8 tid;
u32 tid_conf_mask;
u8 noack;
+ int retry_long;
+ int retry_short;
};
/**
@@ -3925,6 +3930,7 @@ struct cfg80211_ops {
* beaconing mode (AP, IBSS, Mesh, ...).
* @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
* before connection.
+ * @WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT: Device supports data retry count call.
*/
enum wiphy_flags {
/* use hole at 0 */
@@ -3951,6 +3957,7 @@ enum wiphy_flags {
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
WIPHY_FLAG_HAS_STATIC_WEP = BIT(24),
+ WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT = BIT(25),
};
/**
@@ -4466,6 +4473,8 @@ struct cfg80211_pmsr_capabilities {
* @support_mbssid must be set for this to have any effect.
*
* @pmsr_capa: peer measurement capabilities
+ * @max_data_retry_count: Maximum limit can be configured as retry count
+ * for a TID.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -4610,6 +4619,8 @@ struct wiphy {
const struct cfg80211_pmsr_capabilities *pmsr_capa;
+ u8 max_data_retry_count;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e628f4e..d30d7c9 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2364,6 +2364,8 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
* nested attribute with %NL80211_TID_ATTR_* sub-attributes.
+ * @NL80211_ATTR_MAX_RETRY_COUNT: The upper limit for the retry count
+ * configuration that the driver can accept.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2823,6 +2825,7 @@ enum nl80211_attrs {
NL80211_ATTR_TWT_RESPONDER,
NL80211_ATTR_TID_CONFIG,
+ NL80211_ATTR_MAX_RETRY_COUNT,
/* add attributes here, update the policy in nl80211.c */
@@ -4673,11 +4676,50 @@ enum nl80211_tid_config {
* advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
* NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
* configuration.
+ * @NL80211_TID_ATTR_CONFIG_RETRY: Data TID retry count should be applied
+ * with the value passed through %NL80211_TID_ATTR_CONFIG_RETRY_LONG
+ * and/or %NL80211_TID_ATTR_CONFIG_RETRY_SHORT. This configuration
+ * is per-TID, and the TID is specified with %NL80211_TID_ATTR_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, the retry
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * This attribute will be useful to notfiy the driver to apply default
+ * retry values for the connected station (%NL80211_ATTR_MAC), when the
+ * command received without %NL80211_ATTR_RETRY_LONG and/or
+ * %NL80211_ATTR_RETRY_SHORT.
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. When retry count has never been configured using this command, the
+ * other available radio level retry configuration
+ * (%NL80211_ATTR_WIPHY_RETRY_SHORT and %NL80211_ATTR_WIPHY_RETRY_LONG)
+ * should be used. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG and supporting per station
+ * retry count configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG.
+ * @NL80211_TID_ATTR_CONFIG_RETRY_SHORT: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
+ * @NL80211_TID_ATTR_CONFIG_RETRY_LONG: Number of retries used with data frame
+ * transmission, user-space sets this configuration in
+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
+ * the max value should be advertised by the driver through
+ * max_data_retry_count. when this attribute is not present, the driver
+ * would use the default configuration.
*/
enum nl80211_tid_attr_config {
__NL80211_TID_ATTR_INVALID,
NL80211_TID_ATTR_CONFIG_TID,
NL80211_TID_ATTR_CONFIG_NOACK,
+ NL80211_TID_ATTR_CONFIG_RETRY,
+ NL80211_TID_ATTR_CONFIG_RETRY_SHORT,
+ NL80211_TID_ATTR_CONFIG_RETRY_LONG,
/* keep last */
__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5499,6 +5541,10 @@ enum nl80211_feature_flags {
* policy functionality.
* @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
* policy functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG: Driver supports per TID data retry
+ * count functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
+ * data retry count functionality.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5547,6 +5593,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_SAE_OFFLOAD,
NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 4881bfb6..a21a4f4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -286,6 +286,9 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
[NL80211_TID_ATTR_CONFIG_NOACK] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_TID_ATTR_CONFIG_RETRY] = { .type = NLA_FLAG },
+ [NL80211_TID_ATTR_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 0),
+ [NL80211_TID_ATTR_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 0),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13617,6 +13620,47 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_NOACK]);
}
+ if (nla_get_flag(attrs[NL80211_TID_ATTR_CONFIG_RETRY])) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_RETRY],
+ "TID specific configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_RETRY],
+ "peer specfic TID configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RETRY;
+ if (attrs[NL80211_TID_ATTR_CONFIG_RETRY_SHORT]) {
+ tid_conf->retry_short =
+ nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RETRY_SHORT]);
+ if (tid_conf->retry_short >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_short = -1;
+ }
+
+ if (attrs[NL80211_TID_ATTR_CONFIG_RETRY_LONG]) {
+ tid_conf->retry_long =
+ nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RETRY_LONG]);
+ if (tid_conf->retry_long >
+ rdev->wiphy.max_data_retry_count)
+ return -EINVAL;
+ } else {
+ tid_conf->retry_long = -1;
+ }
+ }
+
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 1/9] nl80211: New netlink command for TID specific configuration
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
Add a new NL command, NL80211_CMD_SET_TID_CONFIG to support
data TID specific configuration. This per TID configurations
are passed in NL80211_ATTR_TID_CONFIG which is a nested
attribute. This patch adds support to configure per TID
noack policy through NL80211_TID_ATTR_CONFIG_NOACK attribute.
Data TID value for this configuration will be passed through
NL80211_TID_ATTR_CONFIG_TID attribute. When the user-space wants
this configuration peer specific rather than being applied for
all the connected stations, MAC address of the peer can be passed
in NL80211_ATTR_MAC attribute. This patch introduced
enum ieee80211_tid_conf_mask to notify the driver that which
configuration modified.
Driver supporting data TID specific noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG
and supporting per STA data TID noack policy configuration
should be advertise through NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 35 +++++++++++++
include/uapi/linux/nl80211.h | 57 +++++++++++++++++++++
net/wireless/nl80211.c | 113 ++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 12 +++++
net/wireless/trace.h | 17 +++++++
5 files changed, 234 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2d17e32..af5d684 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -525,6 +525,35 @@ struct cfg80211_chan_def {
u32 center_freq2;
};
+enum ieee80211_tid_conf_mask {
+ IEEE80211_TID_CONF_NOACK = BIT(0),
+};
+
+/**
+ * struct ieee80211_tid_cfg - TID specific configuration
+ * @tid: TID number
+ * @tid_conf_mask: bitmap indicating which parameter changed
+ * see %enum ieee80211_tid_conf_mask
+ * @noack: noack configuration value for the TID
+ */
+struct ieee80211_tid_cfg {
+ u8 tid;
+ u32 tid_conf_mask;
+ u8 noack;
+};
+
+/**
+ * struct ieee80211_tid_config - TID configuration
+ * @peer: Station's MAC address
+ * @n_tid_conf: Number of TID specific configurations to be applied
+ * @tid_conf: Configuration change info
+ */
+struct ieee80211_tid_config {
+ const u8 *peer;
+ u32 n_tid_conf;
+ struct ieee80211_tid_cfg tid_conf[];
+};
+
/**
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
@@ -3525,6 +3554,10 @@ struct cfg80211_update_owe_info {
*
* @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame
* and overrule HWMP path selection algorithm.
+ * @set_tid_config: TID specific configuration. Apply this configuration for
+ * all the connected stations in the BSS if peer is %NULL. Otherwise
+ * apply this configuration to the specific station.
+ * This callback may sleep.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3843,6 +3876,8 @@ struct cfg80211_ops {
struct cfg80211_update_owe_info *owe_info);
int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev,
const u8 *buf, size_t len);
+ int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 8fc3a43..e628f4e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1094,6 +1094,10 @@
* peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
* content. The frame is ethernet data.
*
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ * is passed through this command using %NL80211_ATTR_TID_CONFIG
+ * nested attributes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1318,6 +1322,8 @@ enum nl80211_commands {
NL80211_CMD_PROBE_MESH_LINK,
+ NL80211_CMD_SET_TID_CONFIG,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2356,6 +2362,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
*
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with %NL80211_TID_ATTR_* sub-attributes.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2813,6 +2822,8 @@ enum nl80211_attrs {
NL80211_ATTR_TWT_RESPONDER,
+ NL80211_ATTR_TID_CONFIG,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4635,6 +4646,45 @@ enum nl80211_tx_power_setting {
};
/**
+ * enum nl80211_tid_config - TID config state
+ * @NL80211_TID_CONFIG_DEFAULT: Default config for the TID
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
+ * NL80211_TID_CONFIG_DISABLE: Disable config for the TID
+ */
+enum nl80211_tid_config {
+ NL80211_TID_CONFIG_DEFAULT,
+ NL80211_TID_CONFIG_ENABLE,
+ NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_tid_attr_config - TID specific configuration.
+ * @NL80211_TID_ATTR_CONFIG_TID: a TID value (u8 attribute).
+ * @NL80211_TID_ATTR_CONFIG_NOACK: Configure ack policy for the TID.
+ * specified in %NL80211_TID_ATTR_CONFIG_TID. see %enum nl80211_tid_config.
+ * Its type is u8, if the peer MAC address is passed in %NL80211_ATTR_MAC,
+ * then the noack configuration is applied to the data frame for the tid
+ * to that connected station. This configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, then this
+ * configuration should be treated as per-netdev configuration.
+ * This configuration will be cleared when the interface goes down and on
+ * the disconnection from a BSS. Driver supporting this feature should
+ * advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
+ * NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
+ * configuration.
+ */
+enum nl80211_tid_attr_config {
+ __NL80211_TID_ATTR_INVALID,
+ NL80211_TID_ATTR_CONFIG_TID,
+ NL80211_TID_ATTR_CONFIG_NOACK,
+
+ /* keep last */
+ __NL80211_TID_ATTR_CONFIG_AFTER_LAST,
+ NL80211_TID_ATTR_CONFIG_MAX = __NL80211_TID_ATTR_CONFIG_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_packet_pattern_attr - packet pattern attribute
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
* @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
@@ -5445,6 +5495,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
* station mode (SAE password is passed as part of the connect command).
*
+ * @NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG: Driver supports per TID NoAck
+ * policy functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
+ * policy functionality.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5490,6 +5545,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR,
NL80211_EXT_FEATURE_SAE_OFFLOAD,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ff760ba..4881bfb6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -281,6 +281,13 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy
+nl80211_tid_attr_config_policy[NL80211_TID_ATTR_CONFIG_MAX + 1] = {
+ [NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
+ [NL80211_TID_ATTR_CONFIG_NOACK] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+};
+
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
@@ -574,6 +581,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_SAE_PASSWORD] = { .type = NLA_BINARY,
.len = SAE_PASSWORD_MAX_LEN },
[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
+ [NL80211_ATTR_TID_CONFIG] =
+ NLA_POLICY_NESTED(nl80211_tid_attr_config_policy),
};
/* policy for the key attributes */
@@ -13576,6 +13585,102 @@ static int nl80211_probe_mesh_link(struct sk_buff *skb, struct genl_info *info)
return rdev_probe_mesh_link(rdev, dev, dest, buf, len);
}
+static int parse_tid_conf(struct cfg80211_registered_device *rdev,
+ struct nlattr *attrs[],
+ struct ieee80211_tid_cfg *tid_conf,
+ struct genl_info *info, const u8 *peer)
+{
+ struct netlink_ext_ack *extack = info->extack;
+
+ tid_conf->tid = nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_TID]);
+ if (attrs[NL80211_TID_ATTR_CONFIG_NOACK]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_NOACK],
+ "TID specific configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_NOACK],
+ "peer specfic TID configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_NOACK;
+ tid_conf->noack =
+ nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_NOACK]);
+ }
+
+ return 0;
+}
+
+static int nl80211_set_tid_config(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *attrs[NL80211_TID_ATTR_CONFIG_MAX + 1];
+ struct net_device *dev = info->user_ptr[1];
+ struct ieee80211_tid_config *tid_config;
+ struct nlattr *tid;
+ int conf_idx = 0, rem_conf;
+ int ret = -EINVAL;
+ u32 num_conf = 0;
+
+ if (!info->attrs[NL80211_ATTR_TID_CONFIG])
+ return -EINVAL;
+
+ if (!rdev->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf)
+ num_conf++;
+
+ tid_config = kzalloc(struct_size(tid_config, tid_conf, num_conf),
+ GFP_KERNEL);
+ if (!tid_config)
+ return -ENOMEM;
+
+ tid_config->n_tid_conf = num_conf;
+
+ if (info->attrs[NL80211_ATTR_MAC])
+ tid_config->peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf) {
+ ret = nla_parse_nested_deprecated(attrs, NL80211_TID_ATTR_CONFIG_MAX,
+ tid, NULL, NULL);
+
+ if (ret)
+ goto bad_tid_conf;
+
+ if (!attrs[NL80211_TID_ATTR_CONFIG_TID]) {
+ ret = -EINVAL;
+ goto bad_tid_conf;
+ }
+
+ ret = parse_tid_conf(rdev, attrs,
+ &tid_config->tid_conf[conf_idx],
+ tid_config->peer);
+ if (ret)
+ goto bad_tid_conf;
+
+ conf_idx++;
+ }
+
+ ret = rdev_set_tid_config(rdev, dev, tid_config);
+
+bad_tid_conf:
+ kfree(tid_config);
+ return ret;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14530,6 +14635,14 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_SET_TID_CONFIG,
+ .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+ .doit = nl80211_set_tid_config,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index e853a4f..887cda2 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -1299,4 +1299,16 @@ static inline int rdev_update_owe_info(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int rdev_set_tid_config(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ trace_rdev_set_tid_config(&rdev->wiphy, dev, tid_conf);
+ ret = rdev->ops->set_tid_config(&rdev->wiphy, dev, tid_conf);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
#endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 4fbb91a..199b9b0 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3457,6 +3457,23 @@
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest))
);
+TRACE_EVENT(rdev_set_tid_config,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ struct ieee80211_tid_config *tid_conf),
+ TP_ARGS(wiphy, netdev, tid_conf),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(peer)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(peer, tid_conf->peer);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer))
+);
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 7/9] ath10k: Add wmi command support for station specific TID config
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 32 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 52 +++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 1491c25..796badf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -216,6 +216,8 @@ struct wmi_ops {
struct sk_buff *(*gen_bb_timing)
(struct ath10k *ar,
const struct wmi_bb_timing_cfg_arg *arg);
+ struct sk_buff *(*gen_per_peer_per_tid_cfg)(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg);
};
@@ -1616,4 +1618,21 @@ struct wmi_ops {
return ath10k_wmi_cmd_send(ar, skb,
ar->wmi.cmd->set_bb_timing_cmdid);
}
+
+static inline int
+ath10k_wmi_set_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct sk_buff *skb;
+
+ if (!ar->wmi.ops->gen_per_peer_per_tid_cfg)
+ return -EOPNOTSUPP;
+
+ skb = ar->wmi.ops->gen_per_peer_per_tid_cfg(ar, arg);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ return ath10k_wmi_cmd_send(ar, skb,
+ ar->wmi.cmd->per_peer_per_tid_config_cmdid);
+}
#endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 98a90e4..6b1c70d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -740,6 +740,7 @@
.tdls_peer_update_cmdid = WMI_10_4_TDLS_PEER_UPDATE_CMDID,
.tdls_set_offchan_mode_cmdid = WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
.radar_found_cmdid = WMI_10_4_RADAR_FOUND_CMDID,
+ .per_peer_per_tid_config_cmdid = WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
};
/* MAIN WMI VDEV param map */
@@ -8880,6 +8881,36 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
}
static struct sk_buff *
+ath10k_wmi_10_4_gen_per_peer_per_tid_cfg(struct ath10k *ar,
+ const struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ struct wmi_peer_per_tid_cfg_cmd *cmd;
+ struct sk_buff *skb;
+
+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ memset(skb->data, 0, sizeof(*cmd));
+
+ cmd = (struct wmi_peer_per_tid_cfg_cmd *)skb->data;
+ cmd->vdev_id = cpu_to_le32(arg->vdev_id);
+ ether_addr_copy(cmd->peer_macaddr.addr, arg->peer_macaddr.addr);
+ cmd->tid = cpu_to_le32(arg->tid);
+ cmd->ack_policy = cpu_to_le32(arg->ack_policy);
+ cmd->aggr_control = cpu_to_le32(arg->aggr_control);
+ cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
+ cmd->retry_count = cpu_to_le32(arg->retry_count);
+ cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+
+ ath10k_dbg(ar, ATH10K_DBG_WMI,
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
+ arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ return skb;
+}
+
+static struct sk_buff *
ath10k_wmi_op_gen_echo(struct ath10k *ar, u32 value)
{
struct wmi_echo_cmd *cmd;
@@ -9288,6 +9319,7 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
.gen_pdev_get_tpc_table_cmdid =
ath10k_wmi_10_4_op_gen_pdev_get_tpc_table_cmdid,
.gen_radar_found = ath10k_wmi_10_4_gen_radar_found,
+ .gen_per_peer_per_tid_cfg = ath10k_wmi_10_4_gen_per_peer_per_tid_cfg,
/* shared with 10.2 */
.pull_echo_ev = ath10k_wmi_op_pull_echo_ev,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index e1c40bb..41aaddf 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -200,6 +200,7 @@ enum wmi_service {
WMI_SERVICE_RTT_RESPONDER_ROLE,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -491,6 +492,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
+ SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -818,6 +820,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_REPORT_AIRTIME, len);
+ SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -1019,6 +1023,7 @@ struct wmi_cmd_map {
u32 tdls_set_offchan_mode_cmdid;
u32 radar_found_cmdid;
u32 set_bb_timing_cmdid;
+ u32 per_peer_per_tid_config_cmdid;
};
/*
@@ -1860,6 +1865,8 @@ enum wmi_10_4_cmd_id {
WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
WMI_10_4_RADAR_FOUND_CMDID,
+ WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+ WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
};
@@ -7164,6 +7171,51 @@ struct wmi_tdls_peer_event {
__le32 vdev_id;
} __packed;
+enum wmi_tid_aggr_control_conf {
+ WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+ WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+ WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+ WMI_PEER_TID_CONFIG_ACK,
+ WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+ WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+ WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+ u32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ u32 tid;
+ enum wmi_noack_tid_conf ack_policy;
+ enum wmi_tid_aggr_control_conf aggr_control;
+ u8 rate_ctrl;
+ u32 retry_count;
+ u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+ __le32 vdev_id;
+ struct wmi_mac_addr peer_macaddr;
+ __le32 tid;
+
+ /* see enum wmi_noack_tid_conf */
+ __le32 ack_policy;
+ /* see enum wmi_tid_aggr_control_conf */
+ __le32 aggr_control;
+ /* see enum wmi_tid_rate_ctrl_conf */
+ __le32 rate_control;
+ __le32 rcode_flags;
+ __le32 retry_count;
+} __packed;
+
enum wmi_txbf_conf {
WMI_TXBF_CONF_UNSUPPORTED,
WMI_TXBF_CONF_BEFORE_ASSOC,
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 5/9] nl80211: Add netlink attribute to configure TID specific tx rate
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
Introduce NL80211_TID_ATTR_CONFIG_TX_RATES in nl80211_tid_attr_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_TID_ATTR_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 5 +++
include/uapi/linux/nl80211.h | 39 +++++++++++++++++++++
net/wireless/nl80211.c | 77 ++++++++++++++++++++++++++++++++++++++----
3 files changed, 115 insertions(+), 6 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b875d8..4bc6eb7 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -530,6 +530,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
IEEE80211_TID_CONF_RTSCTS = BIT(3),
+ IEEE80211_TID_CONF_TX_BITRATE = BIT(4),
};
/**
@@ -542,6 +543,8 @@ enum ieee80211_tid_conf_mask {
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
* @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -551,6 +554,8 @@ struct ieee80211_tid_cfg {
int retry_short;
u8 ampdu;
u8 rtscts;
+ enum nl80211_tx_rate_setting txrate_type;
+ struct cfg80211_bitrate_mask *mask;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index df4e07d..04f253d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4649,6 +4649,18 @@ enum nl80211_tx_power_setting {
};
/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+ NL80211_TX_RATE_AUTOMATIC,
+ NL80211_TX_RATE_LIMITED,
+ NL80211_TX_RATE_FIXED,
+};
+
+/**
* enum nl80211_tid_config - TID config state
* @NL80211_TID_CONFIG_DEFAULT: Default config for the TID
* @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
@@ -4742,6 +4754,25 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
* RTS_CTS configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_TID_ATTR_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ * with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ * configuration is per TID, TID is specified with
+ * %NL80211_TID_ATTR_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that connected
+ * station. This attribute will be useful to notfiy the driver that what
+ * type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ * for the connected station (%NL80211_ATTR_MAC),
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ * TX bitrate configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
*/
enum nl80211_tid_attr_config {
__NL80211_TID_ATTR_INVALID,
@@ -4752,6 +4783,8 @@ enum nl80211_tid_attr_config {
NL80211_TID_ATTR_CONFIG_RETRY_LONG,
NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL,
+ NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE,
+ NL80211_TID_ATTR_CONFIG_TX_RATES,
/* keep last */
__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5585,6 +5618,10 @@ enum nl80211_feature_flags {
* RTS_CTS control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
* RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ * TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ * TX bitrate configuration.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5639,6 +5676,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 370c483..a1a8c48 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -281,6 +281,15 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+ [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+ [NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
static const struct nla_policy
nl80211_tid_attr_config_policy[NL80211_TID_ATTR_CONFIG_MAX + 1] = {
[NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
@@ -293,6 +302,10 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+ [NL80211_TID_ATTR_CONFIG_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -4147,14 +4160,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
}
/* if no rates are given set it back to the defaults */
- if (!info->attrs[NL80211_ATTR_TX_RATES])
+ if (!attrs[attr])
goto out;
/* The nested attribute uses enum nl80211_band as the index. This maps
* directly to the enum nl80211_band values used in cfg80211.
*/
BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+ nla_for_each_nested(tx_rates, attrs[attr], rem) {
enum nl80211_band band = nla_type(tx_rates);
int err;
@@ -4602,7 +4615,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, ¶ms.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES,
+ ¶ms.beacon_rate);
if (err)
return err;
@@ -10309,7 +10324,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- err = nl80211_parse_tx_bitrate_mask(info, &mask);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES, &mask);
if (err)
return err;
@@ -10902,7 +10918,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES,
+ &setup.beacon_rate);
if (err)
return err;
@@ -13598,6 +13616,7 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
struct genl_info *info, const u8 *peer)
{
struct netlink_ext_ack *extack = info->extack;
+ int ret;
tid_conf->tid = nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_TID]);
if (attrs[NL80211_TID_ATTR_CONFIG_NOACK]) {
@@ -13713,6 +13732,52 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]);
}
+ if (attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE]) {
+ int idx;
+ enum nl80211_attrs attr;
+
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+ "TID specific configuration not "
+ "supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (peer &&
+ !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+ "peer specfic TID configuration not "
+ "supported");
+ return -EOPNOTSUPP;
+ }
+
+ idx = NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE;
+ tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+ if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+ tid_conf->mask =
+ kzalloc(sizeof(struct cfg80211_bitrate_mask),
+ GFP_KERNEL);
+ if (!tid_conf->mask)
+ return -ENOMEM;
+
+ attr = NL80211_TID_ATTR_CONFIG_TX_RATES;
+ ret = nl80211_parse_tx_bitrate_mask(info, attrs, attr,
+ tid_conf->mask);
+ if (ret) {
+ kfree(tid_conf->mask);
+ return ret;
+ }
+ } else {
+ tid_conf->mask = NULL;
+ }
+ }
+
return 0;
}
@@ -13763,7 +13828,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
ret = parse_tid_conf(rdev, attrs,
&tid_config->tid_conf[conf_idx],
- tid_config->peer);
+ info, tid_config->peer);
if (ret)
goto bad_tid_conf;
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 8/9] ath10k: Add new api to support TID specific configuration
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
This patch add ops for set_tid_config to support TID
specific configuration. STA information along with the
TID config change mask to notify driver that which configuration
needs to be applied for this current command.
If the STA info not available in the command then the
configuration will be applied for all connected stations
in the vif. TID specific noack configuration requires
aggregation disabled and rate for the data TID packets
should be basic rates. So, if the TID already configured
with noack policy then driver will ignore the aggregation
or TX rate related configuration for the same data TID.
In TX rate configuration should be applied with highest
preamble configuration(HT rates should not be applied
for the station which supports vht rates).
Vif specific TID configuration will be applied for all
the connected stations except for the station which
already applied with the same configuration for the TID
through station specific command. Newly connecting stations
will be applied with vif TID configuration which will be stored
in ieee80211_vif.
Testing:
* Tested HW: QCA9888
* Tested FW: 10.4-3.5.1-00052
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 633 ++++++++++++++++++++++++++++----
2 files changed, 559 insertions(+), 80 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e35aae5..3d1b06a 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -82,6 +82,8 @@
/* Default Airtime weight multipler (Tuned for multiclient performance) */
#define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4
+#define ATH10K_MAX_RETRY_COUNT 29
+
struct ath10k;
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -504,6 +506,7 @@ struct ath10k_sta {
#endif
/* Protected with ar->data_lock */
u32 peer_ps_state;
+ struct work_struct tid_config_wk;
};
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ)
@@ -571,6 +574,9 @@ struct ath10k_vif {
struct work_struct ap_csa_work;
struct delayed_work connection_loss_work;
struct cfg80211_bitrate_mask bitrate_mask;
+ u32 tid_conf_changed[IEEE80211_TID_MAX];
+
+ struct ieee80211_tid_config *tid_config;
};
struct ath10k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d2..0ce9720 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2930,6 +2930,59 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
cancel_delayed_work_sync(&arvif->connection_loss_work);
}
+static int ath10k_new_peer_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ath10k_vif *arvif)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif = arvif->vif;
+ bool config_apply;
+ int ret, i;
+
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ if (vif->retry_long[i] || vif->ampdu[i] ||
+ vif->rate_code[i]) {
+ config_apply = true;
+ arg.tid = i;
+ arg.vdev_id = arvif->vdev_id;
+ arg.retry_count = vif->retry_long[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ }
+
+ if (vif->noack[i]) {
+ arg.ack_policy = vif->noack[i];
+ arg.rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg.aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ config_apply = true;
+ }
+
+ /* Assign default value(-1) to newly connected station.
+ * This is to identify station specific tid configuration not
+ * configured for the station.
+ */
+ sta->retry_long[i] = -1;
+ sta->noack[i] = -1;
+ sta->ampdu[i] = -1;
+
+ if (!config_apply)
+ continue;
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret) {
+ ath10k_warn(ar, "failed to set per tid retry/aggr config for sta %pM: %d\n",
+ sta->addr, ret);
+ return ret;
+ }
+ memset(&arg, 0, sizeof(arg));
+ }
+ return 0;
+}
+
static int ath10k_station_assoc(struct ath10k *ar,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -2995,7 +3048,10 @@ static int ath10k_station_assoc(struct ath10k *ar,
}
}
- return ret;
+ if (!test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map))
+ return ret;
+
+ return ath10k_new_peer_tid_config(ar, sta, arvif);
}
static int ath10k_station_disassoc(struct ath10k *ar,
@@ -6350,6 +6406,340 @@ static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif,
ar->num_stations--;
}
+struct ath10k_mac_iter_tid_conf_data {
+ struct ieee80211_vif *curr_vif;
+ struct ath10k *ar;
+};
+
+static bool
+ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ int num_rates = 0;
+ int i;
+
+ num_rates += hweight32(mask->control[band].legacy);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
+ num_rates += hweight8(mask->control[band].ht_mcs[i]);
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
+ num_rates += hweight16(mask->control[band].vht_mcs[i]);
+
+ return num_rates == 1;
+}
+
+static int
+ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
+ enum nl80211_band band,
+ const struct cfg80211_bitrate_mask *mask,
+ u8 *rate, u8 *nss)
+{
+ int rate_idx;
+ int i;
+ u16 bitrate;
+ u8 preamble;
+ u8 hw_rate;
+
+ if (hweight32(mask->control[band].legacy) == 1) {
+ rate_idx = ffs(mask->control[band].legacy) - 1;
+
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
+ rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
+
+ hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
+ bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
+
+ if (ath10k_mac_bitrate_is_cck(bitrate))
+ preamble = WMI_RATE_PREAMBLE_CCK;
+ else
+ preamble = WMI_RATE_PREAMBLE_OFDM;
+
+ *nss = 1;
+ *rate = preamble << 6 |
+ (*nss - 1) << 4 |
+ hw_rate << 0;
+
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
+ if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_HT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].ht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
+ if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
+ *nss = i + 1;
+ *rate = WMI_RATE_PREAMBLE_VHT << 6 |
+ (*nss - 1) << 4 |
+ (ffs(mask->control[band].vht_mcs[i]) - 1);
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ u32 rate_ctrl_flag, u8 nss)
+{
+ if (nss > sta->rx_nss) {
+ ath10k_warn(ar, "Invalid nss field, configured %u limit %u\n",
+ nss, sta->rx_nss);
+ return -EINVAL;
+ }
+
+ if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_VHT) {
+ if (!sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid VHT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else if (ATH10K_HW_PREAMBLE(rate_ctrl_flag) == WMI_RATE_PREAMBLE_HT) {
+ if (!sta->ht_cap.ht_supported || sta->vht_cap.vht_supported) {
+ ath10k_warn(ar, "Invalid HT rate for sta %pM\n",
+ sta->addr);
+ return -EINVAL;
+ }
+ } else {
+ if (sta->ht_cap.ht_supported || sta->vht_cap.vht_supported)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+ath10k_mac_tid_bitrate_config(struct ath10k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ u32 *rate_ctrl_flag, u8 *rate_ctrl,
+ enum nl80211_tx_rate_setting txrate_type,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct cfg80211_chan_def def;
+ enum nl80211_band band;
+ u8 nss, rate;
+ int ret;
+
+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_AUTOMATIC) {
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ *rate_ctrl_flag = 0;
+ return 0;
+ }
+
+ band = def.chan->band;
+
+ if (!ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask))
+ return -EINVAL;
+
+ ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask,
+ &rate, &nss);
+ if (ret) {
+ ath10k_warn(ar, "failed to get single rate: %d\n",
+ ret);
+ return ret;
+ }
+ *rate_ctrl_flag = rate;
+
+ if (sta && ath10k_mac_validate_rate_mask(ar, sta, *rate_ctrl_flag, nss))
+ return -EINVAL;
+
+ if (txrate_type == NL80211_TX_RATE_FIXED)
+ *rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+static void
+ath10k_mac_parse_tid_config(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ieee80211_vif *vif,
+ struct ieee80211_tid_cfg *tid_conf,
+ struct wmi_per_peer_per_tid_cfg_arg *arg)
+{
+ u8 changed = tid_conf->tid_conf_mask;
+ int ret;
+
+ arg->tid = tid_conf->tid;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_conf->noack == NL80211_TID_CONFIG_ENABLE) {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_NOACK;
+ arg->rate_ctrl =
+ WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ } else {
+ arg->ack_policy = WMI_PEER_TID_CONFIG_ACK;
+ arg->rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_AUTO;
+ arg->aggr_control = WMI_TID_CONFIG_AGGR_CONTROL_ENABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_conf->retry_long == -1) {
+ if (vif->retry_long[arg->tid])
+ arg->retry_count = vif->retry_long[arg->tid];
+ else
+ arg->retry_count = ATH10K_MAX_RETRY_COUNT + 1;
+ } else {
+ /* firmware expects tx attempt value */
+ arg->retry_count = tid_conf->retry_long + 1;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_conf->ampdu) {
+ arg->aggr_control = tid_conf->ampdu;
+ } else {
+ if (vif->ampdu[arg->tid])
+ arg->aggr_control = vif->ampdu[arg->tid];
+ else
+ arg->aggr_control =
+ WMI_TID_CONFIG_AGGR_CONTROL_DISABLE;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ ret = ath10k_mac_tid_bitrate_config(ar, vif, sta,
+ &arg->rcode_flags,
+ &arg->rate_ctrl,
+ tid_conf->txrate_type,
+ tid_conf->mask);
+ if (ret) {
+ ath10k_warn(ar, "failed to configure bitrate mask %d\n",
+ ret);
+ arg->rcode_flags = 0;
+ arg->rate_ctrl = 0;
+ }
+ kfree(tid_conf->mask);
+ }
+}
+
+static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
+{
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ struct ieee80211_vif *vif;
+ struct ieee80211_sta *sta;
+ struct ath10k_sta *arsta;
+ struct ath10k_vif *arvif;
+ struct ath10k *ar;
+ bool config_apply;
+ int ret, i;
+ u8 changed;
+
+ arsta = container_of(wk, struct ath10k_sta, tid_config_wk);
+ sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv);
+ arvif = arsta->arvif;
+ vif = arvif->vif;
+ ar = arvif->ar;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ for (i = 0; i < IEEE80211_TID_MAX; i++) {
+ config_apply = false;
+ changed = arvif->tid_conf_changed[i];
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (sta->noack[i] != -1) {
+ arg.ack_policy = 0;
+ } else {
+ config_apply = true;
+ arg.ack_policy = vif->noack[i];
+ arg.aggr_control = vif->ampdu[i];
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->retry_long[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.retry_count = 0;
+ } else {
+ arg.retry_count = vif->retry_long[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->ampdu[i] != -1 ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.aggr_control = 0;
+ } else {
+ arg.aggr_control = vif->ampdu[i];
+ config_apply = true;
+ }
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (ath10k_mac_validate_rate_mask(ar, sta, vif->rate_code[i],
+ ATH10K_HW_NSS(vif->rate_code[i]))) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (sta->rate_ctrl[i] >
+ WMI_TID_CONFIG_RATE_CONTROL_AUTO ||
+ sta->noack[i] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[i] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ } else {
+ arg.rate_ctrl = vif->rate_ctrl[i];
+ arg.rcode_flags = vif->rate_code[i];
+ config_apply = true;
+ }
+ }
+
+ arg.tid = i;
+
+ if (config_apply) {
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ ath10k_warn(ar, "failed to set per tid config for sta %pM: %d\n",
+ sta->addr, ret);
+ }
+
+ arg.ack_policy = 0;
+ arg.retry_count = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_mac_vif_stations_tid_conf(void *data,
+ struct ieee80211_sta *sta)
+{
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data *iter_data = data;
+ struct ieee80211_vif *sta_vif = arsta->arvif->vif;
+
+ if (sta_vif != iter_data->curr_vif || !sta->wme)
+ return;
+
+ ieee80211_queue_work(iter_data->ar->hw, &arsta->tid_config_wk);
+}
+
static int ath10k_sta_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
@@ -6369,6 +6759,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
arsta->arvif = arvif;
arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED;
INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk);
+ INIT_WORK(&arsta->tid_config_wk, ath10k_sta_tid_cfg_wk);
for (i = 0; i < ARRAY_SIZE(sta->txq); i++)
ath10k_mac_txq_init(sta->txq[i]);
@@ -6376,8 +6767,10 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/* cancel must be done outside the mutex to avoid deadlock */
if ((old_state == IEEE80211_STA_NONE &&
- new_state == IEEE80211_STA_NOTEXIST))
+ new_state == IEEE80211_STA_NOTEXIST)) {
cancel_work_sync(&arsta->update_wk);
+ cancel_work_sync(&arsta->tid_config_wk);
+ }
mutex_lock(&ar->conf_mutex);
@@ -7097,25 +7490,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
}
static bool
-ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask)
-{
- int num_rates = 0;
- int i;
-
- num_rates += hweight32(mask->control[band].legacy);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++)
- num_rates += hweight8(mask->control[band].ht_mcs[i]);
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++)
- num_rates += hweight16(mask->control[band].vht_mcs[i]);
-
- return num_rates == 1;
-}
-
-static bool
ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar,
enum nl80211_band band,
const struct cfg80211_bitrate_mask *mask,
@@ -7164,65 +7538,6 @@ static int ath10k_get_survey(struct ieee80211_hw *hw, int idx,
return true;
}
-static int
-ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar,
- enum nl80211_band band,
- const struct cfg80211_bitrate_mask *mask,
- u8 *rate, u8 *nss)
-{
- int rate_idx;
- int i;
- u16 bitrate;
- u8 preamble;
- u8 hw_rate;
-
- if (hweight32(mask->control[band].legacy) == 1) {
- rate_idx = ffs(mask->control[band].legacy) - 1;
-
- if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
- rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-
- hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value;
- bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate;
-
- if (ath10k_mac_bitrate_is_cck(bitrate))
- preamble = WMI_RATE_PREAMBLE_CCK;
- else
- preamble = WMI_RATE_PREAMBLE_OFDM;
-
- *nss = 1;
- *rate = preamble << 6 |
- (*nss - 1) << 4 |
- hw_rate << 0;
-
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) {
- if (hweight8(mask->control[band].ht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_HT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].ht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) {
- if (hweight16(mask->control[band].vht_mcs[i]) == 1) {
- *nss = i + 1;
- *rate = WMI_RATE_PREAMBLE_VHT << 6 |
- (*nss - 1) << 4 |
- (ffs(mask->control[band].vht_mcs[i]) - 1);
-
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif,
u8 rate, u8 nss, u8 sgi, u8 ldpc)
{
@@ -7991,6 +8306,140 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
+static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_config)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = (void *)vif->drv_priv;
+ struct ath10k_mac_iter_tid_conf_data data = {};
+ struct wmi_per_peer_per_tid_cfg_arg arg = {};
+ int ret, i;
+ u8 changed;
+
+ mutex_lock(&ar->conf_mutex);
+ arg.vdev_id = arvif->vdev_id;
+
+ memset(arvif->tid_conf_changed, 0, sizeof(arvif->tid_conf_changed));
+
+ for (i = 0; i < tid_config->n_tid_conf; i++) {
+ if (tid_config->tid_conf[i].tid >= IEEE80211_TID_MAX)
+ continue;
+
+ ath10k_mac_parse_tid_config(ar, sta, vif,
+ &tid_config->tid_conf[i],
+ &arg);
+ changed = tid_config->tid_conf[i].tid_conf_mask;
+ if (sta) {
+ if (!sta->wme) {
+ ret = -ENOTSUPP;
+ goto exit;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK)
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ if (sta->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK ||
+ vif->noack[arg.tid] == WMI_PEER_TID_CONFIG_NOACK) {
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ }
+
+ ether_addr_copy(arg.peer_macaddr.addr, sta->addr);
+ ret = ath10k_wmi_set_per_peer_per_tid_cfg(ar, &arg);
+ if (ret)
+ goto exit;
+
+ /* Store the configured parameters in success case */
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ if (tid_config->tid_conf[i].noack ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->noack[arg.tid] = -1;
+ } else {
+ sta->noack[arg.tid] = arg.ack_policy;
+ }
+
+ arg.ack_policy = 0;
+ arg.aggr_control = 0;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY) {
+ if (tid_config->tid_conf[i].retry_long == -1) {
+ sta->retry_long[arg.tid] = -1;
+ } else {
+ sta->retry_long[arg.tid] = arg.retry_count;
+ }
+
+ arg.retry_count = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_AMPDU) {
+ if (tid_config->tid_conf[i].ampdu ==
+ NL80211_TID_CONFIG_DEFAULT) {
+ sta->ampdu[arg.tid] = -1;
+ } else {
+ sta->ampdu[arg.tid] = arg.aggr_control;
+ }
+
+ arg.aggr_control = 0;
+ }
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ sta->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ arg.rate_ctrl = 0;
+ arg.rcode_flags = 0;
+ }
+ } else {
+ arvif->tid_conf_changed[arg.tid] |= changed;
+
+ if (changed & IEEE80211_TID_CONF_NOACK) {
+ vif->noack[arg.tid] = arg.ack_policy;
+ vif->ampdu[arg.tid] = arg.aggr_control;
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ }
+
+ if (changed & IEEE80211_TID_CONF_RETRY)
+ vif->retry_long[arg.tid] = arg.retry_count;
+
+ if (changed & IEEE80211_TID_CONF_AMPDU)
+ vif->ampdu[arg.tid] = arg.aggr_control;
+
+ if (changed & IEEE80211_TID_CONF_TX_BITRATE) {
+ vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
+ vif->rate_code[arg.tid] = arg.rcode_flags;
+ }
+ }
+ }
+
+ if (sta)
+ goto exit;
+
+ ret = 0;
+ data.curr_vif = vif;
+ data.ar = ar;
+
+ ieee80211_iterate_stations_atomic(hw, ath10k_mac_vif_stations_tid_conf,
+ &data);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_mac_op_tx,
.wake_tx_queue = ath10k_mac_op_wake_tx_queue,
@@ -8033,6 +8482,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
.switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx,
.sta_pre_rcu_remove = ath10k_mac_op_sta_pre_rcu_remove,
.sta_statistics = ath10k_sta_statistics,
+ .set_tid_config = ath10k_mac_op_set_tid_config,
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
@@ -8695,6 +9145,29 @@ int ath10k_mac_register(struct ath10k *ar)
wiphy_ext_feature_set(ar->hw->wiphy,
NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER);
+ if (test_bit(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK);
+ ar->hw->wiphy->max_data_retry_count = ATH10K_MAX_RETRY_COUNT;
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ } else {
+ ar->ops->set_tid_config = NULL;
+ ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 0/9] cfg80211/mac80211: Add support for TID specific configuration
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
Add infrastructure to support per TID configurations like noack policy,
retry count, AMPDU control(disable/enable), RTSCTS control(enable/disable)
and TX rate mask configurations.
This will be useful for the driver which can supports data TID
specific configuration rather than phy level configurations.
Here NL80211_CMD_SET_TID_CONFIG added to support this operation by
accepting TID configuration.
This command can accept STA mac addreess to make the configuration
station specific rather than applying to all the connected stations
to the netdev.
And this nested command configuration can accept multiple number of
data TID specific configuration in a single command,
enum ieee80211_tid_conf_mask used to notify the driver that which
configuration got modified for the TID.
Tamizh chelvam (9):
nl80211: New netlink command for TID specific configuration
nl80211: Add new netlink attribute for TID speicific retry count
nl80211: Add netlink attribute for AMPDU aggregation enable/disable
nl80211: Add netlink attribute to enable/disable RTS_CTS
nl80211: Add netlink attribute to configure TID specific tx rate
mac80211: Add api to support configuring TID specific configuration
ath10k: Add wmi command support for station specific TID config
ath10k: Add new api to support TID specific configuration
ath10k: Add extended TID configuration support
v6:
* Addressed Johannes comments.
v5:
* Fixed possible memleak of 'tid_conf' in nl80211_set_tid_config.
v4:
* Fixed kbuild warnings.
v3:
* Modified "nl80211: Add netlink attribute to configure TID specific tx rate" patch
to accept multiple TX rate configuration at a time.
* Modified noack and ampdu variable data type to int in
"mac80211: Add api to support configuring TID specific configuration" patch to store
default configuration.
* Modified "ath10k: Add new api to support TID specific configuration" patch to handle
default values for noack and ampdu. And added sta pointer sanity check in
ath10k_mac_tid_bitrate_config function.
* Fixed "ath10k: Add extended TID configuration support" wmi command parameters
assigned part.
v2:
* Added support to accept multiple TID configuration
* Added support to configure TX rate and RTSCTS control
drivers/net/wireless/ath/ath10k/core.c | 4 +
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 681 +++++++++++++++++++++++++----
drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +
drivers/net/wireless/ath/ath10k/wmi.c | 35 ++
drivers/net/wireless/ath/ath10k/wmi.h | 72 +++
include/net/cfg80211.h | 57 +++
include/net/mac80211.h | 38 ++
include/uapi/linux/nl80211.h | 188 ++++++++
net/mac80211/cfg.c | 28 ++
net/mac80211/driver-ops.h | 15 +
net/wireless/nl80211.c | 284 +++++++++++-
net/wireless/rdev-ops.h | 12 +
net/wireless/trace.h | 17 +
14 files changed, 1371 insertions(+), 85 deletions(-)
--
1.7.9.5
^ permalink raw reply
* [PATCHv6 9/9] ath10k: Add extended TID configuration support
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
This patch extend TID configuration support to configure
RTS_CTS control and TX rate limit. Tx rate limit is
similar to auto rate but it will be limited to the user
configured rate mask rather than the station's highest
supported rate mask. Here ext_tid_cfg_bitmap added
to notify the target which extended configuration
parameter has modified(here RTS_CTS).
WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT service flag
introduced to advertise this support.
Testing:
* Tested HW: QCA9984
* Tested FW: 10.4-3.9.0.2-00021
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 4 +++
drivers/net/wireless/ath/ath10k/mac.c | 48 ++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 9 ++++--
drivers/net/wireless/ath/ath10k/wmi.h | 20 +++++++++++++
4 files changed, 78 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index aff5856..5c021aa 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2636,6 +2636,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map))
val |= WMI_10_4_REPORT_AIRTIME;
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map))
+ val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT;
+
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0ce9720..79e5ec7 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2950,6 +2950,12 @@ static int ath10k_new_peer_tid_config(struct ath10k *ar,
arg.aggr_control = vif->ampdu[i];
arg.rate_ctrl = vif->rate_ctrl[i];
arg.rcode_flags = vif->rate_code[i];
+ if (vif->rtscts[i])
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ else
+ arg.ext_tid_cfg_bitmap = 0;
+ arg.rtscts_ctrl = vif->rtscts[i];
}
if (vif->noack[i]) {
@@ -6560,6 +6566,10 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
if (txrate_type == NL80211_TX_RATE_FIXED)
*rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else if (txrate_type == NL80211_TX_RATE_LIMITED &&
+ (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map)))
+ *rate_ctrl = WMI_PEER_TID_CONFIG_RATE_UPPER_CAP;
else
return -EOPNOTSUPP;
return 0;
@@ -6628,6 +6638,14 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
}
kfree(tid_conf->mask);
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (tid_conf->rtscts)
+ arg->rtscts_ctrl = tid_conf->rtscts - 1;
+ else
+ arg->rtscts_ctrl = WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE;
+ arg->ext_tid_cfg_bitmap = WMI_EXT_TID_RTS_CTS_CONFIG;
+ }
}
static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
@@ -6708,6 +6726,18 @@ static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
}
}
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (sta->rtscts[i]) {
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ } else {
+ arg.rtscts_ctrl = vif->rtscts[i] - 1;
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ config_apply = true;
+ }
+ }
+
arg.tid = i;
if (config_apply) {
@@ -8403,6 +8433,13 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
arg.rate_ctrl = 0;
arg.rcode_flags = 0;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ sta->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ }
} else {
arvif->tid_conf_changed[arg.tid] |= changed;
@@ -8422,6 +8459,10 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
vif->rate_code[arg.tid] = arg.rcode_flags;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS)
+ vif->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
}
}
@@ -9168,6 +9209,13 @@ int ath10k_mac_register(struct ath10k *ar)
ar->ops->set_tid_config = NULL;
ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
}
+
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL);
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 6b1c70d..544a621 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -8902,11 +8902,14 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
cmd->retry_count = cpu_to_le32(arg->retry_count);
cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+ cmd->ext_tid_cfg_bitmap = cpu_to_le32(arg->ext_tid_cfg_bitmap);
+ cmd->rtscts_ctrl = cpu_to_le32(arg->rtscts_ctrl);
ath10k_dbg(ar, ATH10K_DBG_WMI,
- "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
- arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
- arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d rtscts %d ext_tid_cfg_bitmap %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control,
+ arg->rate_ctrl, arg->rcode_flags, arg->retry_count, arg->rtscts_ctrl,
+ arg->ext_tid_cfg_bitmap, arg->peer_macaddr.addr);
return skb;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 41aaddf..cec3731 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -201,6 +201,7 @@ enum wmi_service {
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -493,6 +494,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
+ SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -822,6 +824,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_REPORT_AIRTIME, len);
SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -7188,6 +7192,16 @@ enum wmi_tid_rate_ctrl_conf {
WMI_TID_CONFIG_RATE_CONTROL_AUTO,
WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+ WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
+};
+
+enum wmi_tid_rtscts_control_conf {
+ WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
+ WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
+};
+
+enum wmi_ext_tid_config_map {
+ WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
};
struct wmi_per_peer_per_tid_cfg_arg {
@@ -7199,6 +7213,8 @@ struct wmi_per_peer_per_tid_cfg_arg {
u8 rate_ctrl;
u32 retry_count;
u32 rcode_flags;
+ u32 ext_tid_cfg_bitmap;
+ u32 rtscts_ctrl;
};
struct wmi_peer_per_tid_cfg_cmd {
@@ -7214,6 +7230,10 @@ struct wmi_peer_per_tid_cfg_cmd {
__le32 rate_control;
__le32 rcode_flags;
__le32 retry_count;
+ /* See enum wmi_ext_tid_config_map */
+ __le32 ext_tid_cfg_bitmap;
+ /* see enum wmi_tid_rtscts_control_conf */
+ __le32 rtscts_ctrl;
} __packed;
enum wmi_txbf_conf {
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
Introduce NL80211_TID_ATTR_CONFIG_AMPDU_CTRL in nl80211_attr_tid_config
to accept TID specific AMPDU aggregation enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
aggregation control configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per-STA data TID
ampdu configuration should advertise NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 25 +++++++++++++++++++++++++
3 files changed, 50 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 91bcb07..d2814e8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -528,6 +528,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
+ IEEE80211_TID_CONF_AMPDU = BIT(2),
};
/**
@@ -538,6 +539,7 @@ enum ieee80211_tid_conf_mask {
* @noack: noack configuration value for the TID
* @retry_long: retry count value
* @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -545,6 +547,7 @@ struct ieee80211_tid_cfg {
u8 noack;
int retry_long;
int retry_short;
+ u8 ampdu;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index d30d7c9..465dbc6 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4712,6 +4712,21 @@ enum nl80211_tid_config {
* the max value should be advertised by the driver through
* max_data_retry_count. when this attribute is not present, the driver
* would use the default configuration.
+ * @NL80211_TID_ATTR_CONFIG_AMPDU_CTRL: Enable/Disable aggregation for the TID
+ * specified in %%NL80211_TID_ATTR_CONFIG_TID. Its type is u8,
+ * if the peer MAC address is passed in %NL80211_ATTR_MAC, the aggregation
+ * configuration is applied
+ * to the data frame for the tid to that connected station.
+ * Station specific aggregation configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
+ * aggregation configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
*/
enum nl80211_tid_attr_config {
__NL80211_TID_ATTR_INVALID,
@@ -4720,6 +4735,7 @@ enum nl80211_tid_attr_config {
NL80211_TID_ATTR_CONFIG_RETRY,
NL80211_TID_ATTR_CONFIG_RETRY_SHORT,
NL80211_TID_ATTR_CONFIG_RETRY_LONG,
+ NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
/* keep last */
__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5545,6 +5561,10 @@ enum nl80211_feature_flags {
* count functionality.
* @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
* data retry count functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL: Driver supports TID specific
+ * aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
+ * specific TID aggregation control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5595,6 +5615,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a21a4f4..a8982de 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -289,6 +289,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_TID_ATTR_CONFIG_RETRY] = { .type = NLA_FLAG },
[NL80211_TID_ATTR_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 0),
[NL80211_TID_ATTR_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 0),
+ [NL80211_TID_ATTR_CONFIG_AMPDU_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13661,6 +13663,29 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
}
}
+ if (attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
+ "TID specific configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
+ "peer specfic TID configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_AMPDU;
+ tid_conf->ampdu =
+ nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL]);
+ }
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 4/9] nl80211: Add netlink attribute to enable/disable RTS_CTS
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
Introduce NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL in nl80211_attr_tid_config
to accept TID specific RTS_CTS enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
RTS_CTS control configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per-STA data TID
RTS_CTS configuration should advertise NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 27 +++++++++++++++++++++++++++
3 files changed, 52 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d2814e8..1b875d8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -529,6 +529,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
+ IEEE80211_TID_CONF_RTSCTS = BIT(3),
};
/**
@@ -540,6 +541,7 @@ enum ieee80211_tid_conf_mask {
* @retry_long: retry count value
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
+ * @rtscts: Enable/Disable RTS/CTS
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -548,6 +550,7 @@ struct ieee80211_tid_cfg {
int retry_long;
int retry_short;
u8 ampdu;
+ u8 rtscts;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 465dbc6..df4e07d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4727,6 +4727,21 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
* aggregation configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
+ * @NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TID
+ * specified in %%NL80211_TID_ATTR_CONFIG_TID. It is u8 type, if the
+ * peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that
+ * connected station.
+ * Station specific RTS_CTS configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
+ * RTS_CTS configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
*/
enum nl80211_tid_attr_config {
__NL80211_TID_ATTR_INVALID,
@@ -4736,6 +4751,7 @@ enum nl80211_tid_attr_config {
NL80211_TID_ATTR_CONFIG_RETRY_SHORT,
NL80211_TID_ATTR_CONFIG_RETRY_LONG,
NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
+ NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL,
/* keep last */
__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5565,6 +5581,10 @@ enum nl80211_feature_flags {
* aggregation control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
* specific TID aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL: Driver supports TID specific
+ * RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
+ * RTS_CTS control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5617,6 +5637,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a8982de..370c483 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -291,6 +291,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_TID_ATTR_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 0),
[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13686,6 +13688,31 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
tid_conf->ampdu =
nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL]);
}
+
+ if (attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL],
+ "TID specific configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL],
+ "peer specfic TID configuration not "
+ "supported");
+ return -ENOTSUPP;
+ }
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_RTSCTS;
+ tid_conf->rtscts =
+ nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]);
+ }
+
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCHv6 6/9] mac80211: Add api to support configuring TID specific configuration
From: Tamizh chelvam @ 2019-06-18 5:27 UTC (permalink / raw)
To: johannes, ath10k; +Cc: linux-wireless, Tamizh chelvam
In-Reply-To: <1560835632-17405-1-git-send-email-tamizhr@codeaurora.org>
Implement drv_set_tid_config api to allow TID specific
configuration. This per-TID configuration
will be applied for all the connected stations when MAC is NULL.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
include/net/mac80211.h | 38 ++++++++++++++++++++++++++++++++++++++
net/mac80211/cfg.c | 28 ++++++++++++++++++++++++++++
net/mac80211/driver-ops.h | 15 +++++++++++++++
3 files changed, 81 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4411120..f97c755 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1563,6 +1563,8 @@ enum ieee80211_vif_flags {
IEEE80211_VIF_GET_NOA_UPDATE = BIT(3),
};
+#define IEEE80211_TID_MAX 8
+
/**
* struct ieee80211_vif - per-interface data
*
@@ -1600,6 +1602,13 @@ enum ieee80211_vif_flags {
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
* @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
* protected by fq->lock.
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rate_code: per-TID tx rate code mask.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_vif {
enum nl80211_iftype type;
@@ -1626,6 +1635,14 @@ struct ieee80211_vif {
bool txqs_stopped[IEEE80211_NUM_ACS];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u32 rate_code[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -1960,6 +1977,12 @@ struct ieee80211_sta_txpwr {
* @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
* the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
+ * @noack: per-TID noack policy.
+ * @retry_short: per-TID retry count.
+ * @retry_long: per-TID count.
+ * @ampdu: per-TID Aggregation-MPDU.
+ * @rate_ctrl: per-TID tx rate control type.
+ * @rtscts: per-TID RTSCTS policy.
*/
struct ieee80211_sta {
u32 supp_rates[NUM_NL80211_BANDS];
@@ -2004,6 +2027,13 @@ struct ieee80211_sta {
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
+ int noack[IEEE80211_TID_MAX];
+ int retry_short[IEEE80211_TID_MAX];
+ int retry_long[IEEE80211_TID_MAX];
+ int ampdu[IEEE80211_TID_MAX];
+ u8 rate_ctrl[IEEE80211_TID_MAX];
+ u8 rtscts[IEEE80211_TID_MAX];
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -3743,6 +3773,10 @@ enum ieee80211_reconfig_type {
*
* @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep)
* @abort_pmsr: abort peer measurement (this call can sleep)
+ * @set_tid_config: TID specific configurations will be applied for a particular
+ * station when @sta is non-NULL. When @sta is %NULL, then the configuration
+ * will be for all the connected clients in the vif.
+ * This callback may sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -4043,6 +4077,10 @@ struct ieee80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf);
};
/**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fcf1dfc..55c08af 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3940,6 +3940,33 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
return drv_abort_pmsr(local, sdata, request);
}
+static int ieee80211_set_tid_config(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct sta_info *sta;
+ int ret;
+
+ if (!sdata->local->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ if (!tid_conf->peer)
+ return drv_set_tid_config(sdata->local, sdata, NULL, tid_conf);
+
+ mutex_lock(&sdata->local->sta_mtx);
+
+ sta = sta_info_get_bss(sdata, tid_conf->peer);
+ if (!sta) {
+ mutex_unlock(&sdata->local->sta_mtx);
+ return -ENOENT;
+ }
+
+ ret = drv_set_tid_config(sdata->local, sdata, &sta->sta, tid_conf);
+ mutex_unlock(&sdata->local->sta_mtx);
+ return ret;
+}
+
const struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -4038,4 +4065,5 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
.probe_mesh_link = ieee80211_probe_mesh_link,
+ .set_tid_config = ieee80211_set_tid_config,
};
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index c2d8b54..d1ffca5 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1356,4 +1356,19 @@ static inline void drv_del_nan_func(struct ieee80211_local *local,
trace_drv_return_void(local);
}
+static inline int drv_set_tid_config(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ might_sleep();
+ ret = local->ops->set_tid_config(&local->hw, &sdata->vif, sta,
+ tid_conf);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
+
#endif /* __MAC80211_DRIVER_OPS */
--
1.7.9.5
^ permalink raw reply related
* Re: wpa_supplicant 2.8 fails in brcmf_cfg80211_set_pmk
From: Chi-Hsien Lin @ 2019-06-18 5:33 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Stefan Wahren, Stanley Hsu, Arend van Spriel, Franky Lin,
Hante Meuleman, Wright Feng, linux-wireless@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com, brcm80211-dev-list
In-Reply-To: <2AF2E0A7-23F0-4FFE-A658-4906FF546199@holtmann.org>
[-- Attachment #1: Type: text/plain, Size: 1302 bytes --]
On 06/17/2019 10:33, Marcel Holtmann wrote:
> Hi Chi-hsien,
>
>>>> i was able to reproduce an (maybe older issue) with 4-way handshake
>>>> offloading for 802.1X in the brcmfmac driver. My setup consists of
>>>> Raspberry Pi 3 B (current linux-next, arm64/defconfig) on STA side and a
>>>> Raspberry Pi 3 A+ (Linux 4.19) on AP side.
>>>
>>> Looks like Raspberry Pi isn't the only affected platform [3], [4].
>>>
>>> [3] - https://bugzilla.redhat.com/show_bug.cgi?id=1665608
>>> [4] - https://bugzilla.kernel.org/show_bug.cgi?id=202521
>>
>> Stefan,
>>
>> Could you please try the attached patch for your wpa_supplicant? We'll
>> upstream if it works for you.
>
> I hope that someone is also providing a kernel patch to fix the issue. Hacking around a kernel issue in userspace is not enough. Fix the root cause in the kernel.
Marcel,
This is a kernel warning for invalid application PMK set actions, so the
fix is to only set PMK to wifi driver when 4-way is offloaded. I think
Arend added the WARN_ON() intentionally to catch application misuse of
PMK setting.
You may also remove the warnings with the attached patch, but let's see
what Arend says first.
Arend,
Any comment?
Regards,
Chi-hsien Lin
>
> Regards
>
> Marcel
>
> .
>
[-- Attachment #2: 0001-brcmfmac-remove-WARN_ON-for-invalid-pmk-set.patch --]
[-- Type: text/plain, Size: 1896 bytes --]
From a54c0e7dcd815a5ef31bdbabe44792f2cedce0e3 Mon Sep 17 00:00:00 2001
From: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Date: Mon, 17 Jun 2019 23:42:23 -0500
Subject: [PATCH] brcmfmac: remove WARN_ON() for invalid pmk set
2526ff21aa77c("brcmfmac: support 4-way handshake offloading for 802.1X")
added WARN_ON() to catch invalid PMK usage. Remove them and keep the
error return EINVAL.
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index e9c8b21091a1..08b5fad38307 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1938,7 +1938,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
}
if (sme->crypto.psk) {
- if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) {
+ if (profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE) {
err = -EINVAL;
goto done;
}
@@ -5173,7 +5173,7 @@ static int brcmf_cfg80211_set_pmk(struct wiphy *wiphy, struct net_device *dev,
/* expect using firmware supplicant for 1X */
ifp = netdev_priv(dev);
- if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X))
+ if (ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X)
return -EINVAL;
if (conf->pmk_len > BRCMF_WSEC_MAX_PSK_LEN)
@@ -5189,7 +5189,7 @@ static int brcmf_cfg80211_del_pmk(struct wiphy *wiphy, struct net_device *dev,
brcmf_dbg(TRACE, "enter\n");
ifp = netdev_priv(dev);
- if (WARN_ON(ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X))
+ if (ifp->vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_1X)
return -EINVAL;
return brcmf_set_pmk(ifp, NULL, 0);
--
2.1.0
^ permalink raw reply related
* [PATCH V6 2/2] ath10k: add tx hw 802.11 encapusaltion offloading suppor
From: John Crispin @ 2019-06-18 6:28 UTC (permalink / raw)
To: Johannes Berg, Kalle Valo
Cc: ath10k, linux-wireless, Vasanthakumar Thiagarajan, John Crispin
In-Reply-To: <20190618062807.17158-1-john@phrozen.org>
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.
Testing on a IPQ4019 based hardware shows a increase in TCP throughput
of ~20% when the feature is enabled.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath10k/core.c | 11 ++++
drivers/net/wireless/ath/ath10k/core.h | 3 +
drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++---
drivers/net/wireless/ath/ath10k/mac.c | 70 +++++++++++++++++++-----
drivers/net/wireless/ath/ath10k/txrx.c | 11 +++-
5 files changed, 94 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index aff585658fc0..ac6e41f09f2a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -30,6 +30,7 @@ static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
static bool rawmode;
+static bool ethernetmode;
unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -41,6 +42,7 @@ module_param(uart_print, bool, 0644);
module_param(skip_otp, bool, 0644);
module_param(rawmode, bool, 0644);
module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
+module_param(ethernetmode, bool, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
@@ -48,6 +50,7 @@ MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
+MODULE_PARM_DESC(ethernetmode, "Use ethernet frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
@@ -2939,6 +2942,14 @@ static void ath10k_core_register_work(struct work_struct *work)
/* peer stats are enabled by default */
set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
+ if (ethernetmode && rawmode) {
+ ath10k_err(ar, "ethernet and raw mode cannot co-exist\n");
+ status = -EINVAL;
+ goto err;
+ }
+
+ ar->ethernetmode = ethernetmode;
+
status = ath10k_core_probe_fw(ar);
if (status) {
ath10k_err(ar, "could not probe fw (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e35aae5146f1..1bc463a39d6c 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -109,6 +109,7 @@ enum ath10k_skb_flags {
ATH10K_SKB_F_MGMT = BIT(3),
ATH10K_SKB_F_QOS = BIT(4),
ATH10K_SKB_F_RAW_TX = BIT(5),
+ ATH10K_SKB_F_HW_80211_ENCAP = BIT(6),
};
struct ath10k_skb_cb {
@@ -1190,6 +1191,8 @@ struct ath10k {
struct work_struct radar_confirmation_work;
struct ath10k_bus_params bus_param;
+ bool ethernetmode;
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index d8e9cc0bb772..ae4c48b8b706 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1143,6 +1143,10 @@ static u8 ath10k_htt_tx_get_tid(struct sk_buff *skb, bool is_eth)
struct ieee80211_hdr *hdr = (void *)skb->data;
struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+ /* Firmware takes care of tid classification for ethernet format */
+ if (cb->flags & ATH10K_SKB_F_HW_80211_ENCAP)
+ return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+
if (!is_eth && ieee80211_is_mgmt(hdr->frame_control))
return HTT_DATA_TX_EXT_TID_MGMT;
else if (cb->flags & ATH10K_SKB_F_QOS)
@@ -1351,15 +1355,17 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
txbuf_paddr = htt->txbuf.paddr +
(sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
- if ((ieee80211_is_action(hdr->frame_control) ||
- ieee80211_is_deauth(hdr->frame_control) ||
- ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
- } else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
- txmode == ATH10K_HW_TXRX_RAW &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+ if ((ieee80211_is_action(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control) ||
+ ieee80211_is_disassoc(hdr->frame_control)) &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ } else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+ txmode == ATH10K_HW_TXRX_RAW &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ }
}
skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d287333..6918587951cb 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3386,12 +3386,16 @@ ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
struct sk_buff *skb)
{
const struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
__le16 fc = hdr->frame_control;
if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
return ATH10K_HW_TXRX_RAW;
+ if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ return ATH10K_HW_TXRX_ETHERNET;
+
if (ieee80211_is_mgmt(fc))
return ATH10K_HW_TXRX_MGMT;
@@ -3544,6 +3548,15 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
ieee80211_is_data_qos(hdr->frame_control);
cb->flags = 0;
+ cb->vif = vif;
+ cb->txq = txq;
+ cb->airtime_est = airtime;
+
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ cb->flags |= ATH10K_SKB_F_HW_80211_ENCAP;
+ return;
+ }
+
if (!ath10k_tx_h_use_hwcrypto(vif, skb))
cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
@@ -3562,10 +3575,6 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
cb->flags |= ATH10K_SKB_F_RAW_TX;
}
-
- cb->vif = vif;
- cb->txq = txq;
- cb->airtime_est = airtime;
}
bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
@@ -3675,6 +3684,9 @@ static int ath10k_mac_tx(struct ath10k *ar,
const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
int ret;
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ goto skip_encap;
+
/* We should disable CCK RATE due to P2P */
if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
@@ -3698,6 +3710,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
}
}
+skip_encap:
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
if (!ath10k_mac_tx_frm_has_freq(ar)) {
ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n",
@@ -3747,6 +3760,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
int ret;
unsigned long time_left;
bool tmp_peer_created = false;
+ struct ieee80211_tx_info *info;
/* FW requirement: We must create a peer before FW will send out
* an offchannel frame. Otherwise the frame will be stuck and
@@ -3766,8 +3780,14 @@ void ath10k_offchan_tx_work(struct work_struct *work)
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n",
skb);
- hdr = (struct ieee80211_hdr *)skb->data;
- peer_addr = ieee80211_get_DA(hdr);
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ peer_addr = skb->data;
+ } else {
+ hdr = (struct ieee80211_hdr *)skb->data;
+ peer_addr = ieee80211_get_DA(hdr);
+ }
spin_lock_bh(&ar->data_lock);
vdev_id = ar->scan.vdev_id;
@@ -4295,7 +4315,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif = info->control.vif;
struct ieee80211_sta *sta = control->sta;
struct ieee80211_txq *txq = NULL;
- struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_hdr *hdr;
enum ath10k_hw_txrx_mode txmode;
enum ath10k_mac_tx_path txpath;
bool is_htt;
@@ -4326,14 +4346,20 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
return;
}
- ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
- if (ret) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
- ret);
- ath10k_htt_tx_dec_pending(htt);
- spin_unlock_bh(&ar->htt.tx_lock);
- ieee80211_free_txskb(ar->hw, skb);
- return;
+ if (is_mgmt) {
+ hdr = (struct ieee80211_hdr *)skb->data;
+ is_presp = ieee80211_is_probe_resp(hdr->frame_control);
+
+ ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt,
+ is_presp);
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
+ ret);
+ ath10k_htt_tx_dec_pending(htt);
+ spin_unlock_bh(&ar->htt.tx_lock);
+ ieee80211_free_txskb(ar->hw, skb);
+ return;
+ }
}
spin_unlock_bh(&ar->htt.tx_lock);
}
@@ -5094,6 +5120,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
struct ath10k_vif *arvif = (void *)vif->drv_priv;
struct ath10k_peer *peer;
enum wmi_sta_powersave_param param;
+ int hw_encap = 0;
int ret = 0;
u32 value;
int bit;
@@ -5185,6 +5212,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
break;
}
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ case NL80211_IFTYPE_AP:
+ hw_encap = 1;
+ break;
+ default:
+ break;
+ }
+ ieee80211_set_hw_80211_encap(vif, ar->ethernetmode & hw_encap);
+
/* Using vdev_id as queue number will make it very easy to do per-vif
* tx queue locking. This shouldn't wrap due to interface combinations
* but do a modulo for correctness sake and prevent using offchannel tx
@@ -8602,6 +8640,8 @@ int ath10k_mac_register(struct ath10k *ar)
ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+ if (ar->ethernetmode)
+ ieee80211_hw_set(ar->hw, SUPPORTS_80211_ENCAP);
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index c5818d28f55a..bad5e7335c0e 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -50,6 +50,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
struct ath10k_skb_cb *skb_cb;
struct ath10k_txq *artxq;
struct sk_buff *msdu;
+ struct ieee80211_vif *vif;
+ u8 flags;
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt tx completion msdu_id %u status %d\n",
@@ -78,6 +80,9 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
artxq->num_fw_queued--;
}
+ flags = skb_cb->flags;
+ vif = skb_cb->vif;
+
ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
ath10k_htt_tx_dec_pending(htt);
if (htt->num_pending_tx == 0)
@@ -121,7 +126,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
info->status.is_valid_ack_signal = true;
}
- ieee80211_tx_status(htt->ar->hw, msdu);
+ if (flags & ATH10K_SKB_F_HW_80211_ENCAP)
+ ieee80211_tx_status_8023(htt->ar->hw, vif, msdu);
+ else
+ ieee80211_tx_status(htt->ar->hw, msdu);
+
/* we do not own the msdu anymore */
return 0;
--
2.20.1
^ permalink raw reply related
* [PATCH V6 0/2] mac80211: add 802.11 encapsulation offloading
From: John Crispin @ 2019-06-18 6:28 UTC (permalink / raw)
To: Johannes Berg, Kalle Valo; +Cc: ath10k, linux-wireless, John Crispin
This series picks up prior work from QCA. The patch is currently shipped
inside QSDK as part of the wlan-open package.
The series tries to address all feedback from the V2
-> https://patchwork.kernel.org/patch/9602585/
Changes in V3
* rebase on latest kernel
* various code style clean ups
* give some of the variables and functions more obvious names
* move the code that disables support for non-linear frames to the core
* disable monitor and tkip support
Changes in V4
* disable encap when TKIP is used instead of refusing TKIP
* use a flag inside tx_info instead of an extra element
* move 4addr detection into ieee80211_set_hw_80211_encap()
* ieee80211_tx_dequeue() was dropping out to early
Changes in V5
* implement comments from Johannes
Changes in V6
* the conditional masking out monitor support was inverse
Vasanthakumar Thiagarajan (2):
mac80211: add hw 80211 encapsulation offloading support
ath10k: add tx hw 802.11 encapusaltion offloading suppor
drivers/net/wireless/ath/ath10k/core.c | 11 ++
drivers/net/wireless/ath/ath10k/core.h | 3 +
drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +--
drivers/net/wireless/ath/ath10k/mac.c | 70 +++++++--
drivers/net/wireless/ath/ath10k/txrx.c | 11 +-
include/net/mac80211.h | 25 +++
net/mac80211/cfg.c | 6 +
net/mac80211/debugfs.c | 1 +
net/mac80211/ieee80211_i.h | 10 ++
net/mac80211/iface.c | 84 ++++++++++
net/mac80211/key.c | 7 +
net/mac80211/main.c | 10 +-
net/mac80211/status.c | 79 ++++++++++
net/mac80211/tx.c | 187 ++++++++++++++++++++++-
14 files changed, 495 insertions(+), 33 deletions(-)
--
2.20.1
^ permalink raw reply
* [PATCH V6 1/2] mac80211: add hw 80211 encapsulation offloading support
From: John Crispin @ 2019-06-18 6:28 UTC (permalink / raw)
To: Johannes Berg, Kalle Valo
Cc: ath10k, linux-wireless, Vasanthakumar Thiagarajan, John Crispin
In-Reply-To: <20190618062807.17158-1-john@phrozen.org>
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
This patch adds a new transmit path for hardware that supports 802.11
encapsulation offloading. In those cases 802.3a frames get passed
directly to the driver allowing to hardware to handle the encapsulation.
Certain features wont work and the patch masks these out.
* monitor interfaces are not supported if any of the vif is in encap mode.
* amsdu/non-linear frames wont work in encap offloading mode.
* TKIP countermeasures cannot be triggered and hence those keys are not
accepted.
The patch defines a secondary netdev_ops struct that the device is assigned
to the device if 802.11 encap support is available and enabled. The driver
needs to enable the support on a per vif basis if it finds that all
pre-reqs are meet.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/mac80211.h | 25 +++++
net/mac80211/cfg.c | 6 ++
net/mac80211/debugfs.c | 1 +
net/mac80211/ieee80211_i.h | 10 ++
net/mac80211/iface.c | 84 +++++++++++++++++
net/mac80211/key.c | 7 ++
net/mac80211/main.c | 10 +-
net/mac80211/status.c | 79 ++++++++++++++++
net/mac80211/tx.c | 187 ++++++++++++++++++++++++++++++++++++-
9 files changed, 401 insertions(+), 8 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 1a93ca593c28..426b4f4d9020 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -827,6 +827,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_AMSDU = BIT(3),
IEEE80211_TX_CTRL_FAST_XMIT = BIT(4),
IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5),
+ IEEE80211_TX_CTRL_HW_80211_ENCAP = BIT(6),
};
/*
@@ -2281,6 +2282,9 @@ struct ieee80211_txq {
* @IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT: The card/driver can't handle
* active Tx A-MPDU sessions with Extended Key IDs during rekey.
*
+ * @IEEE80211_HW_SUPPORTS_80211_ENCAP: Hardware/driver supports 802.11
+ * encap for data frames.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -2334,6 +2338,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID,
IEEE80211_HW_EXT_KEY_ID_NATIVE,
IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT,
+ IEEE80211_HW_SUPPORTS_80211_ENCAP,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -4629,6 +4634,25 @@ static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb);
+/**
+ * ieee80211_tx_status_8023 - transmit status callback for 802.3 frame format
+ *
+ * Call this function for all transmitted data frames after their transmit
+ * completion. This callback should only be called for data frames which
+ * are are using driver's (or hardware's) offload capability of encap/decap
+ * 802.11 frames.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @vif: the interface for which the frame was transmitted
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status_8023(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb);
+
/**
* ieee80211_report_low_ack - report non-responding station
*
@@ -6384,4 +6408,5 @@ void ieee80211_nan_func_match(struct ieee80211_vif *vif,
struct cfg80211_nan_match_params *match,
gfp_t gfp);
+bool ieee80211_set_hw_80211_encap(struct ieee80211_vif *vif, bool enable);
#endif /* MAC80211_H */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8a6a38d74878..fb2588ec90a1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2424,11 +2424,17 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
+ struct ieee80211_sub_if_data *sdata;
int err;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
ieee80211_check_fast_xmit_all(local);
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list)
+ ieee80211_set_hw_80211_encap(&sdata->vif, false);
+ mutex_unlock(&local->iflist_mtx);
+
err = drv_set_frag_threshold(local, wiphy->frag_threshold);
if (err) {
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 7c580010836e..69baf5d381ad 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -275,6 +275,7 @@ static const char *hw_flag_names[] = {
FLAG(SUPPORTS_ONLY_HE_MULTI_BSSID),
FLAG(EXT_KEY_ID_NATIVE),
FLAG(NO_AMPDU_KEYBORDER_SUPPORT),
+ FLAG(SUPPORTS_80211_ENCAP),
#undef FLAG
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 07da9e49db94..9e8474782a60 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -987,6 +987,8 @@ struct ieee80211_sub_if_data {
} debugfs;
#endif
+ bool hw_80211_encap;
+
/* must be last, dynamically sized area in this! */
struct ieee80211_vif vif;
};
@@ -1733,6 +1735,7 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
struct vif_params *params);
int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type);
+bool ieee80211_is_hw_80211_encap(struct ieee80211_local *local);
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
u32 ieee80211_idle_off(struct ieee80211_local *local);
@@ -1760,6 +1763,8 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
struct net_device *dev);
netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev);
+netdev_tx_t ieee80211_subif_start_xmit_8023(struct sk_buff *skb,
+ struct net_device *dev);
void __ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev,
u32 info_flags,
@@ -1940,6 +1945,11 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, int tid,
enum nl80211_band band, u32 txdata_flags);
+/* sta_out needs to be checked for ERR_PTR() before using */
+int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb,
+ struct sta_info **sta_out);
+
static inline void
ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, int tid,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 410685d38c46..14a7c665afd0 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1176,6 +1176,89 @@ static const struct net_device_ops ieee80211_dataif_ops = {
.ndo_get_stats64 = ieee80211_get_stats64,
};
+static const struct net_device_ops ieee80211_dataif_8023_ops = {
+ .ndo_open = ieee80211_open,
+ .ndo_stop = ieee80211_stop,
+ .ndo_uninit = ieee80211_uninit,
+ .ndo_start_xmit = ieee80211_subif_start_xmit_8023,
+ .ndo_set_rx_mode = ieee80211_set_multicast_list,
+ .ndo_set_mac_address = ieee80211_change_mac,
+ .ndo_select_queue = ieee80211_netdev_select_queue,
+ .ndo_get_stats64 = ieee80211_get_stats64,
+};
+
+bool ieee80211_set_hw_80211_encap(struct ieee80211_vif *vif, bool enable)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_key *key;
+
+ sdata_assert_lock(sdata);
+
+ if (!sdata->dev)
+ return 0;
+
+ if (enable == sdata->hw_80211_encap)
+ return enable;
+
+ if (!ieee80211_hw_check(&local->hw, SUPPORTS_80211_ENCAP))
+ enable = 0;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ if (sdata->u.mgd.use_4addr)
+ enable = 0;
+ break;
+ case NL80211_IFTYPE_AP_VLAN:
+ if (sdata->wdev.use_4addr)
+ enable = 0;
+ break;
+ default:
+ break;
+ }
+
+ if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) &&
+ (local->hw.wiphy->frag_threshold != (u32)-1))
+ enable = 0;
+
+ mutex_lock(&sdata->local->key_mtx);
+ list_for_each_entry(key, &sdata->key_list, list) {
+ if (key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)
+ enable = 0;
+ }
+ mutex_unlock(&sdata->local->key_mtx);
+
+ if (enable) {
+ sdata->dev->netdev_ops = &ieee80211_dataif_8023_ops;
+ sdata->hw_80211_encap = true;
+ } else {
+ sdata->dev->netdev_ops = &ieee80211_dataif_ops;
+ sdata->hw_80211_encap = false;
+ }
+
+ return enable;
+}
+EXPORT_SYMBOL(ieee80211_set_hw_80211_encap);
+
+bool ieee80211_is_hw_80211_encap(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+ bool offloaded = false;
+ rcu_read_lock();
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (sdata->hw_80211_encap) {
+ offloaded = true;
+ break;
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+ rcu_read_unlock();
+
+ return offloaded;
+}
+
static u16 ieee80211_monitor_select_queue(struct net_device *dev,
struct sk_buff *skb,
struct net_device *sb_dev)
@@ -1408,6 +1491,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.idle = true;
sdata->noack_map = 0;
+ sdata->hw_80211_encap = false;
/* only monitor/p2p-device differ */
if (sdata->dev) {
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index faadfeea7127..4c9977770a45 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -179,6 +179,10 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
}
}
+ /* TKIP countermeasures wont work on encap offload mode */
+ if (key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)
+ ieee80211_set_hw_80211_encap(&sdata->vif, false);
+
ret = drv_set_key(key->local, SET_KEY, sdata,
sta ? &sta->sta : NULL, &key->conf);
@@ -205,6 +209,9 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
key->conf.keyidx,
sta ? sta->sta.addr : bcast_addr, ret);
+ if (sdata->hw_80211_encap)
+ return -EINVAL;
+
out_unsupported:
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_WEP40:
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 1f11907dc528..c5096e24d81b 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1000,9 +1000,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
}
- /* mac80211 always supports monitor */
- hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
- hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
+ if (ieee80211_hw_check(hw, SUPPORTS_80211_ENCAP)) {
+ /* mac80211 always supports monitor unless we do 802.11
+ * encapsulation offloading.
+ */
+ hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+ hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
+ }
/* mac80211 doesn't support more than one IBSS interface right now */
for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 5b9952b1caf3..0c8858c01e36 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -1019,6 +1019,85 @@ void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL(ieee80211_tx_rate_update);
+void ieee80211_tx_status_8023(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct sta_info *sta;
+ int retry_count;
+ int rates_idx;
+ bool acked;
+
+ if (WARN_ON(!ieee80211_hw_check(hw, SUPPORTS_80211_ENCAP)))
+ goto skip_stats_update;
+
+ sdata = vif_to_sdata(vif);
+
+ acked = info->flags & IEEE80211_TX_STAT_ACK;
+ rates_idx = ieee80211_tx_get_rates(hw, info, &retry_count);
+
+ rcu_read_lock();
+
+ if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) {
+ rcu_read_unlock();
+ goto counters_update;
+ }
+
+ if (!sta || IS_ERR(sta)) {
+ rcu_read_unlock();
+ goto counters_update;
+ }
+
+ if (!acked)
+ sta->status_stats.retry_failed++;
+
+ if (rates_idx != -1)
+ sta->tx_stats.last_rate = info->status.rates[rates_idx];
+
+ sta->status_stats.retry_count += retry_count;
+
+ if (ieee80211_hw_check(hw, REPORTS_TX_ACK_STATUS)) {
+ if (acked && vif->type == NL80211_IFTYPE_STATION)
+ ieee80211_sta_reset_conn_monitor(sdata);
+
+ sta->status_stats.last_ack = jiffies;
+ if (info->flags & IEEE80211_TX_STAT_ACK) {
+ if (sta->status_stats.lost_packets)
+ sta->status_stats.lost_packets = 0;
+
+ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
+ sta->status_stats.last_tdls_pkt_time = jiffies;
+ } else {
+ ieee80211_lost_packet(sta, info);
+ }
+ }
+
+ rcu_read_unlock();
+
+counters_update:
+ ieee80211_led_tx(local);
+
+ if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+ !(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED))
+ goto skip_stats_update;
+
+ I802_DEBUG_INC(local->dot11TransmittedFrameCount);
+ if (is_multicast_ether_addr(skb->data))
+ I802_DEBUG_INC(local->dot11MulticastTransmittedFrameCount);
+ if (retry_count > 0)
+ I802_DEBUG_INC(local->dot11RetryCount);
+ if (retry_count > 1)
+ I802_DEBUG_INC(local->dot11MultipleRetryCount);
+
+skip_stats_update:
+ ieee80211_report_used_skb(local, skb, false);
+ dev_kfree_skb(skb);
+}
+EXPORT_SYMBOL(ieee80211_tx_status_8023);
+
void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index dd220b977025..0d1f525c0b02 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1253,7 +1253,8 @@ static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local,
(info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE))
return NULL;
- if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) {
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) &&
+ unlikely(!ieee80211_is_data_present(hdr->frame_control))) {
if ((!ieee80211_is_mgmt(hdr->frame_control) ||
ieee80211_is_bufferable_mmpdu(hdr->frame_control) ||
vif->type == NL80211_IFTYPE_STATION) &&
@@ -2358,9 +2359,9 @@ static inline bool ieee80211_is_tdls_setup(struct sk_buff *skb)
skb->data[14] == WLAN_TDLS_SNAP_RFTYPE;
}
-static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
- struct sk_buff *skb,
- struct sta_info **sta_out)
+int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb,
+ struct sta_info **sta_out)
{
struct sta_info *sta;
@@ -2870,7 +2871,8 @@ void ieee80211_check_fast_xmit(struct sta_info *sta)
struct ieee80211_chanctx_conf *chanctx_conf;
__le16 fc;
- if (!ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT))
+ if (!ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT) ||
+ sdata->hw_80211_encap)
return;
/* Locking here protects both the pointer itself, and against concurrent
@@ -3600,6 +3602,9 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
else
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ goto encap_out;
+
if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) {
struct sta_info *sta = container_of(txq->sta, struct sta_info,
sta);
@@ -3659,6 +3664,7 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
break;
}
+encap_out:
IEEE80211_SKB_CB(skb)->control.vif = vif;
return skb;
@@ -4030,6 +4036,167 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
}
+static bool ieee80211_tx_8023(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, int led_len,
+ struct sta_info *sta,
+ bool txpending)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_tx_control control = {};
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sta *pubsta = NULL;
+ unsigned long flags;
+ int q = info->hw_queue;
+
+ if (ieee80211_queue_skb(local, sdata, sta, skb))
+ return true;
+
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+
+ if (local->queue_stop_reasons[q] ||
+ (!txpending && !skb_queue_empty(&local->pending[q]))) {
+ if (txpending)
+ skb_queue_head(&local->pending[q], skb);
+ else
+ skb_queue_tail(&local->pending[q], skb);
+
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+ return false;
+ }
+
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+
+ if (sta && sta->uploaded)
+ pubsta = &sta->sta;
+
+ control.sta = pubsta;
+
+ drv_tx(local, &control, skb);
+
+ return true;
+}
+
+static void ieee80211_8023_xmit(struct ieee80211_sub_if_data *sdata,
+ struct net_device *dev, struct sta_info *sta,
+ struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ethhdr *ehdr = (struct ethhdr *)skb->data;
+ struct ieee80211_local *local = sdata->local;
+ bool authorized = false;
+ bool multicast;
+ bool tdls_peer;
+ unsigned char *ra = NULL;
+
+ if (IS_ERR(sta) || (sta && !sta->uploaded))
+ sta = NULL;
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ tdls_peer = test_sta_flag(sta, WLAN_STA_TDLS_PEER);
+ if (tdls_peer)
+ ra = skb->data;
+ else
+ ra = sdata->u.mgd.bssid;
+ } else {
+ ra = ehdr->h_dest;
+ }
+
+ if (!ra)
+ goto out_free;
+ multicast = is_multicast_ether_addr(ra);
+
+ if (sta)
+ authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
+
+ if (!multicast && !authorized &&
+ ((ehdr->h_proto != sdata->control_port_protocol) ||
+ !ether_addr_equal(sdata->vif.addr, ehdr->h_source)))
+ goto out_free;
+
+ if (multicast && sdata->vif.type == NL80211_IFTYPE_AP &&
+ !atomic_read(&sdata->u.ap.num_mcast_sta))
+ goto out_free;
+
+ if (unlikely(test_bit(SCAN_SW_SCANNING, &local->scanning)) &&
+ test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state))
+ goto out_free;
+
+ /* TODO: Handle frames requiring wifi tx status to be notified */
+
+ memset(info, 0, sizeof(*info));
+
+ if (unlikely(sdata->control_port_protocol == ehdr->h_proto)) {
+ if (sdata->control_port_no_encrypt)
+ info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ info->control.flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO;
+ }
+
+ if (multicast)
+ info->flags |= IEEE80211_TX_CTL_NO_ACK;
+
+ info->hw_queue = sdata->vif.hw_queue[skb_get_queue_mapping(skb)];
+
+ ieee80211_tx_stats(dev, skb->len);
+
+ if (sta) {
+ sta->tx_stats.bytes[skb_get_queue_mapping(skb)] += skb->len;
+ sta->tx_stats.packets[skb_get_queue_mapping(skb)]++;
+ }
+
+ if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ sdata = container_of(sdata->bss,
+ struct ieee80211_sub_if_data, u.ap);
+
+ info->control.flags |= IEEE80211_TX_CTRL_HW_80211_ENCAP;
+ info->control.vif = &sdata->vif;
+
+ ieee80211_tx_8023(sdata, skb, skb->len, sta, false);
+
+ return;
+
+out_free:
+ kfree_skb(skb);
+}
+
+netdev_tx_t ieee80211_subif_start_xmit_8023(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct sta_info *sta;
+
+ if (WARN_ON(!sdata->hw_80211_encap)) {
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (unlikely(skb->len < ETH_HLEN)) {
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (WARN_ON(dev->ieee80211_ptr->use_4addr)) {
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ rcu_read_lock();
+
+ if (ieee80211_lookup_ra_sta(sdata, skb, &sta))
+ goto out_free;
+
+ ieee80211_8023_xmit(sdata, dev, sta, skb);
+
+ goto out;
+
+out_free:
+ kfree_skb(skb);
+out:
+ rcu_read_unlock();
+
+ return NETDEV_TX_OK;
+}
+
struct sk_buff *
ieee80211_build_data_template(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u32 info_flags)
@@ -4108,6 +4275,16 @@ static bool ieee80211_tx_pending_skb(struct ieee80211_local *local,
}
info->band = chanctx_conf->def.chan->band;
result = ieee80211_tx(sdata, NULL, skb, true, 0);
+ } else if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) {
+ dev_kfree_skb(skb);
+ return true;
+ }
+
+ if (IS_ERR(sta) || (sta && !sta->uploaded))
+ sta = NULL;
+
+ result = ieee80211_tx_8023(sdata, skb, skb->len, sta, true);
} else {
struct sk_buff_head skbs;
--
2.20.1
^ permalink raw reply related
* [PATCH V3 2/2] mac80211: allow setting spatial reuse parameters from bss_conf
From: John Crispin @ 2019-06-18 6:19 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190618061915.7102-1-john@phrozen.org>
Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or
when a station connects to an AP. This allows the driver to configure the
HW accordingly.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/cfg80211.h | 15 +++++++++++++
include/net/mac80211.h | 4 ++++
include/uapi/linux/nl80211.h | 27 ++++++++++++++++++++++
net/mac80211/cfg.c | 5 ++++-
net/mac80211/he.c | 24 ++++++++++++++++++++
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/mlme.c | 1 +
net/wireless/nl80211.c | 43 ++++++++++++++++++++++++++++++++++++
8 files changed, 121 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2d17e32eb438..49de2c69e63f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -249,6 +249,19 @@ struct ieee80211_rate {
u16 hw_value, hw_value_short;
};
+/**
+ * struct ieee80211_he_obss_pd - AP settings for spatial reuse
+ *
+ * @enable: is the feature enabled.
+ * @min_offset: minimal tx power offset an associated station shall use
+ * @max_offset: maximum tx power offset an associated station shall use
+ */
+struct ieee80211_he_obss_pd {
+ bool enable;
+ u32 min_offset;
+ u32 max_offset;
+};
+
/**
* struct ieee80211_sta_ht_cap - STA's HT capabilities
*
@@ -899,6 +912,7 @@ enum cfg80211_ap_settings_flags {
* @vht_required: stations must support VHT
* @twt_responder: Enable Target Wait Time
* @flags: flags, as defined in enum cfg80211_ap_settings_flags
+ * @he_obss_pd: OBSS Packet Detection settings
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -926,6 +940,7 @@ struct cfg80211_ap_settings {
bool ht_required, vht_required;
bool twt_responder;
u32 flags;
+ struct ieee80211_he_obss_pd he_obss_pd;
};
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4411120e5a9a..1a93ca593c28 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -318,6 +318,7 @@ struct ieee80211_vif_chanctx_switch {
* @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
* functionality changed for this BSS (AP mode).
* @BSS_CHANGED_TWT: TWT status changed
+ * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
*
*/
enum ieee80211_bss_change {
@@ -349,6 +350,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_MCAST_RATE = 1<<25,
BSS_CHANGED_FTM_RESPONDER = 1<<26,
BSS_CHANGED_TWT = 1<<27,
+ BSS_CHANGED_HE_OBSS_PD = 1<<28,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -603,6 +605,7 @@ struct ieee80211_ftm_responder_params {
* nontransmitted BSSIDs
* @profile_periodicity: the least number of beacon frames need to be received
* in order to discover all the nontransmitted BSSIDs in the set.
+ * @he_obss_pd: OBSS Packet Detection parameters.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -664,6 +667,7 @@ struct ieee80211_bss_conf {
u8 bssid_indicator;
bool ema_ap;
u8 profile_periodicity;
+ struct ieee80211_he_obss_pd he_obss_pd;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 8fc3a43cac75..68ee35cbd75e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2356,6 +2356,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
*
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2813,6 +2816,8 @@ enum nl80211_attrs {
NL80211_ATTR_TWT_RESPONDER,
+ NL80211_ATTR_HE_OBSS_PD,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -6488,4 +6493,26 @@ enum nl80211_peer_measurement_ftm_resp {
NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
};
+/**
+ * enum nl80211_he_spr - spatial reuse attributes
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
+ *
+ * @NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest spiatl reuse attribute.
+ */
+enum nl80211_he_spr_attributes {
+ __NL80211_HE_OBSS_PD_ATTR_INVALID,
+
+ NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET,
+ NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET,
+
+ /* keep last */
+ __NL80211_ATTR_HE_OBSS_PD_LAST,
+ NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_ATTR_HE_OBSS_PD_LAST - 1,
+};
+
+
#endif /* __LINUX_NL80211_H */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fcf1dfc3a1cc..8a6a38d74878 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -976,7 +976,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
BSS_CHANGED_SSID |
BSS_CHANGED_P2P_PS |
BSS_CHANGED_TXPOWER |
- BSS_CHANGED_TWT;
+ BSS_CHANGED_TWT |
+ BSS_CHANGED_HE_OBSS_PD;
int err;
int prev_beacon_int;
@@ -1047,6 +1048,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
sdata->vif.bss_conf.enable_beacon = true;
sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
sdata->vif.bss_conf.twt_responder = params->twt_responder;
+ memcpy(&sdata->vif.bss_conf.he_obss_pd, ¶ms->he_obss_pd,
+ sizeof(struct ieee80211_he_obss_pd));
sdata->vif.bss_conf.ssid_len = params->ssid_len;
if (params->ssid_len)
diff --git a/net/mac80211/he.c b/net/mac80211/he.c
index 769078ed5a12..5bb99bd3400c 100644
--- a/net/mac80211/he.c
+++ b/net/mac80211/he.c
@@ -53,3 +53,27 @@ ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
he_cap->has_he = true;
}
+
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+ const struct ieee80211_he_spr *he_spr_ie_elem)
+{
+ struct ieee80211_he_obss_pd *he_obss_pd =
+ &vif->bss_conf.he_obss_pd;
+ const u8 *data = he_spr_ie_elem->optional;
+
+ memset(he_obss_pd, 0, sizeof(*he_obss_pd));
+
+ if (!he_spr_ie_elem)
+ return;
+
+ if (he_spr_ie_elem->he_sr_control &
+ IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ data++;
+ if (he_spr_ie_elem->he_sr_control &
+ IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT) {
+ he_obss_pd->max_offset = *data++;
+ he_obss_pd->min_offset = *data++;
+ he_obss_pd->enable = true;
+ }
+}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0ee5d82e6734..07da9e49db94 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1873,6 +1873,9 @@ ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband,
const u8 *he_cap_ie, u8 he_cap_len,
struct sta_info *sta);
+void
+ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
+ const struct ieee80211_he_spr *he_spr_ie_elem);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b971b02d0d60..c5fee29ce03c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3373,6 +3373,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
if (elems.uora_element)
bss_conf->uora_ocw_range = elems.uora_element[0];
+ ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems.he_spr);
/* TODO: OPEN: what happens if BSS color disable is set? */
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ff760ba83449..166bc66173f6 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -574,6 +574,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_SAE_PASSWORD] = { .type = NLA_BINARY,
.len = SAE_PASSWORD_MAX_LEN },
[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
+ [NL80211_ATTR_HE_OBSS_PD] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
@@ -4348,6 +4349,40 @@ static int nl80211_parse_beacon(struct cfg80211_registered_device *rdev,
return 0;
}
+static const struct nla_policy
+ he_spr_policy[NL80211_HE_OBSS_PD_ATTR_MAX + 1] = {
+ [NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET] = { .type = NLA_U32 },
+ [NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET] = { .type = NLA_U32 },
+};
+
+static int nl80211_parse_he_obss_pd(struct nlattr *attrs,
+ struct ieee80211_he_obss_pd *he_obss_pd)
+{
+ struct nlattr *tb[NL80211_HE_OBSS_PD_ATTR_MAX + 1];
+ int err;
+
+ err = nla_parse_nested(tb, NL80211_HE_OBSS_PD_ATTR_MAX, attrs,
+ he_spr_policy, NULL);
+ if (err)
+ return err;
+
+ if (!tb[NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET] ||
+ !tb[NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET])
+ return -EINVAL;
+
+ he_obss_pd->min_offset =
+ nla_get_u32(tb[NL80211_ATTR_HE_OBSS_PD_MIN_OFFSET]);
+ he_obss_pd->max_offset =
+ nla_get_u32(tb[NL80211_ATTR_HE_OBSS_PD_MAX_OFFSET]);
+
+ if (he_obss_pd->min_offset >= he_obss_pd->max_offset)
+ return -EINVAL;
+
+ he_obss_pd->enable = true;
+
+ return 0;
+}
+
static void nl80211_check_ap_rate_selectors(struct cfg80211_ap_settings *params,
const u8 *rates)
{
@@ -4632,6 +4667,14 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
params.twt_responder =
nla_get_flag(info->attrs[NL80211_ATTR_TWT_RESPONDER]);
+ if (info->attrs[NL80211_ATTR_HE_OBSS_PD]) {
+ err = nl80211_parse_he_obss_pd(
+ info->attrs[NL80211_ATTR_HE_OBSS_PD],
+ ¶ms.he_obss_pd);
+ if (err)
+ return err;
+ }
+
nl80211_calculate_ap_params(¶ms);
if (info->attrs[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT])
--
2.20.1
^ permalink raw reply related
* [PATCH V3 1/2] mac80211: HE: add Spatial Reuse IE parsing support
From: John Crispin @ 2019-06-18 6:19 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, John Crispin, Shashidhar Lakkavalli
In-Reply-To: <20190618061915.7102-1-john@phrozen.org>
Add support to mac80211 for parsing SPR IEs as per
P802.11ax_D4.0 section 9.4.2.241.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/linux/ieee80211.h | 49 ++++++++++++++++++++++++++++++++++++++
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/util.c | 4 ++++
3 files changed, 54 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 2dbefeffc43c..538d502902c0 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1628,6 +1628,18 @@ struct ieee80211_he_operation {
u8 optional[0];
} __packed;
+/**
+ * struct ieee80211_he_spr - HE spatial reuse element
+ *
+ * This structure is the "HE spatial reuse element" element as
+ * described in P802.11ax_D4.0 section 9.4.2.241
+ */
+struct ieee80211_he_spr {
+ u8 he_sr_control;
+ /* Optional 0 to 19 bytes: depends on @he_sr_control */
+ u8 optional[0];
+} __packed;
+
/**
* struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field
*
@@ -2066,6 +2078,42 @@ ieee80211_he_oper_size(const u8 *he_oper_ie)
return oper_len;
}
+/* HE Spatial Reuse defines */
+#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT 0x4
+#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT 0x8
+
+/*
+ * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size
+ * @he_spr_ie: byte data of the He Spatial Reuse IE, stating from the the byte
+ * after the ext ID byte. It is assumed that he_spr_ie has at least
+ * sizeof(struct ieee80211_he_spr) bytes, the caller must have validated
+ * this
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_spr_size(const u8 *he_spr_ie)
+{
+ struct ieee80211_he_spr *he_spr = (void *)he_spr_ie;
+ u8 spr_len = sizeof(struct ieee80211_he_spr);
+ u32 he_spr_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_spr_ie)
+ return 0;
+
+ /* Calc required length */
+ he_spr_params = le32_to_cpu(he_spr->he_sr_control);
+ if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ spr_len++;
+ if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT)
+ spr_len += 18;
+
+ /* Add the first byte (extension ID) to the total length */
+ spr_len++;
+
+ return spr_len;
+}
+
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
@@ -2488,6 +2536,7 @@ enum ieee80211_eid_ext {
WLAN_EID_EXT_HE_OPERATION = 36,
WLAN_EID_EXT_UORA = 37,
WLAN_EID_EXT_HE_MU_EDCA = 38,
+ WLAN_EID_EXT_HE_SPR = 39,
WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52,
WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55,
WLAN_EID_EXT_NON_INHERITANCE = 56,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 073a8235ae1b..0ee5d82e6734 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1483,6 +1483,7 @@ struct ieee802_11_elems {
const struct ieee80211_meshconf_ie *mesh_config;
const u8 *he_cap;
const struct ieee80211_he_operation *he_operation;
+ const struct ieee80211_he_spr *he_spr;
const struct ieee80211_mu_edca_param_set *mu_edca_param_set;
const u8 *uora_element;
const u8 *mesh_id;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index cba4633cd6cf..34ce0ed67e59 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1236,6 +1236,10 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION &&
elen == 3) {
elems->mbssid_config_ie = (void *)&pos[1];
+ } else if (pos[0] == WLAN_EID_EXT_HE_SPR &&
+ elen >= sizeof(*elems->he_spr) &&
+ elen >= ieee80211_he_spr_size(&pos[1])) {
+ elems->he_spr = (void *)&pos[1];
}
break;
default:
--
2.20.1
^ permalink raw reply related
* [PATCH V3 0/2] mac80211: HE: add SPR/OBSSPD support
From: John Crispin @ 2019-06-18 6:19 UTC (permalink / raw)
To: Johannes Berg; +Cc: linux-wireless, John Crispin
This series adds support for propagating the OBSS PD information from
assocs to a wireless driver.
Changes in V2
* always use bss_conf as per request from Johannes
Changes in V3
* remove reference to mac80211 inside comment
John Crispin (2):
mac80211: HE: add Spatial Reuse IE parsing support
mac80211: allow setting spatial reuse parameters from bss_conf
include/linux/ieee80211.h | 49 ++++++++++++++++++++++++++++++++++++
include/net/cfg80211.h | 15 +++++++++++
include/net/mac80211.h | 4 +++
include/uapi/linux/nl80211.h | 27 ++++++++++++++++++++
net/mac80211/cfg.c | 5 +++-
net/mac80211/he.c | 24 ++++++++++++++++++
net/mac80211/ieee80211_i.h | 4 +++
net/mac80211/mlme.c | 1 +
net/mac80211/util.c | 4 +++
net/wireless/nl80211.c | 43 +++++++++++++++++++++++++++++++
10 files changed, 175 insertions(+), 1 deletion(-)
--
2.20.1
^ permalink raw reply
* RE: [PATCH] ath10k: add mic bytes for pmf management packet
From: Wen Gong @ 2019-06-18 7:21 UTC (permalink / raw)
To: Ben Greear, Wen Gong, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
In-Reply-To: <136d04d4-671b-8dde-2abd-63070b07bd26@candelatech.com>
> -----Original Message-----
> From: ath10k <ath10k-bounces@lists.infradead.org> On Behalf Of Ben
> Greear
> Sent: Tuesday, June 18, 2019 12:04 AM
> To: Wen Gong <wgong@codeaurora.org>; ath10k@lists.infradead.org
> Cc: linux-wireless@vger.kernel.org
> Subject: [EXT] Re: [PATCH] ath10k: add mic bytes for pmf management
> packet
>
> I was looking at mac80211 code recently, and it seems some action
> frames are NOT supposed to be protected. I added my own helper
> method to my local ath10k. Maybe you want to use this?
>
>
> /* Copied from ieee80211_is_robust_mgmt_frame, but disable the check for
> has_protected
> * since we do tx hw crypt, and it won't actually be encrypted even when this
> flag is
> * set.
> */
> bool ieee80211_is_robust_mgmt_frame_tx(struct ieee80211_hdr *hdr)
> {
> if (ieee80211_is_disassoc(hdr->frame_control) ||
> ieee80211_is_deauth(hdr->frame_control))
> return true;
>
> if (ieee80211_is_action(hdr->frame_control)) {
> u8 *category;
>
> /*
> * Action frames, excluding Public Action frames, are Robust
> * Management Frames. However, if we are looking at a Protected
> * frame, skip the check since the data may be encrypted and
> * the frame has already been found to be a Robust Management
> * Frame (by the other end).
> */
> /*
> if (ieee80211_has_protected(hdr->frame_control))
> return true;
> */
> category = ((u8 *) hdr) + 24;
> return *category != WLAN_CATEGORY_PUBLIC &&
> *category != WLAN_CATEGORY_HT &&
> *category != WLAN_CATEGORY_WNM_UNPROTECTED &&
> *category != WLAN_CATEGORY_SELF_PROTECTED &&
> *category != WLAN_CATEGORY_UNPROT_DMG &&
> *category != WLAN_CATEGORY_VHT &&
> *category != WLAN_CATEGORY_VENDOR_SPECIFIC;
> }
>
> return false;
> }
>
> Thanks,
> Ben
>
> > +
> > data_len = msdu->len;
> >
> > switch (txmode) {
> >
>
>
Thanks Ben,
seems the ieee80211_is_robust_mgmt_frame_tx is not
match my change.
^ permalink raw reply
* Re: wpa_supplicant 2.8 fails in brcmf_cfg80211_set_pmk
From: Arend Van Spriel @ 2019-06-18 8:27 UTC (permalink / raw)
To: Chi-Hsien Lin, Marcel Holtmann
Cc: Stefan Wahren, Stanley Hsu, Franky Lin, Hante Meuleman,
Wright Feng, linux-wireless@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com, brcm80211-dev-list,
Jouni Malinen
In-Reply-To: <d6bfe313-3aa7-82bb-dfac-25e6261dbf63@cypress.com>
+ Jouni
On 6/18/2019 7:33 AM, Chi-Hsien Lin wrote:
>
>
> On 06/17/2019 10:33, Marcel Holtmann wrote:
>> Hi Chi-hsien,
>>
>>>>> i was able to reproduce an (maybe older issue) with 4-way handshake
>>>>> offloading for 802.1X in the brcmfmac driver. My setup consists of
>>>>> Raspberry Pi 3 B (current linux-next, arm64/defconfig) on STA side and a
>>>>> Raspberry Pi 3 A+ (Linux 4.19) on AP side.
>>>>
>>>> Looks like Raspberry Pi isn't the only affected platform [3], [4].
>>>>
>>>> [3] - https://bugzilla.redhat.com/show_bug.cgi?id=1665608
>>>> [4] - https://bugzilla.kernel.org/show_bug.cgi?id=202521
>>>
>>> Stefan,
>>>
>>> Could you please try the attached patch for your wpa_supplicant? We'll
>>> upstream if it works for you.
>>
>> I hope that someone is also providing a kernel patch to fix the issue. Hacking around a kernel issue in userspace is not enough. Fix the root cause in the kernel.
>
> Marcel,
>
> This is a kernel warning for invalid application PMK set actions, so the
> fix is to only set PMK to wifi driver when 4-way is offloaded. I think
> Arend added the WARN_ON() intentionally to catch application misuse of
> PMK setting.
>
> You may also remove the warnings with the attached patch, but let's see
> what Arend says first.
>
>
> Arend,
>
> Any comment?
Hi Chi-Hsien, Marcel
From the kernel side I do not see an issue. In order to use 802.1X
offload the NL80211_ATTR_WANT_1X_4WAY_HS flag must be set in
NL80211_CMD_CONNECT. Otherwise, NL80211_CMD_SET_PMK is not accepted. The
only improvement would be to document this more clearly in the "WPA/WPA2
EAPOL handshake offload" DOC section in nl80211.h.
As for the wpa_supplicant behavior it seemed a good idea to reuse the
req_key_mgmt_offload parameter at the time, but it seems to bite each
other. Maybe it is better to have a separate flag like
'req_handshake_offload'. Jouni, any thoughts on this?
Regards,
Arend
^ permalink raw reply
* Re: [PATCH] rt2x00: fix rx queue hang
From: Stanislaw Gruszka @ 2019-06-18 9:34 UTC (permalink / raw)
To: Soeren Moch
Cc: Helmut Schaa, Kalle Valo, David S. Miller, linux-wireless, netdev,
linux-kernel, stable
In-Reply-To: <20190617094656.3952-1-smoch@web.de>
Hi
On Mon, Jun 17, 2019 at 11:46:56AM +0200, Soeren Moch wrote:
> Since commit ed194d136769 ("usb: core: remove local_irq_save() around
> ->complete() handler") the handlers rt2x00usb_interrupt_rxdone() and
> rt2x00usb_interrupt_txdone() are not running with interrupts disabled
> anymore. So these handlers are not guaranteed to run completely before
> workqueue processing starts. So only mark entries ready for workqueue
> processing after proper accounting in the dma done queue.
It was always the case on SMP machines that rt2x00usb_interrupt_{tx/rx}done
can run concurrently with rt2x00_work_{rx,tx}done, so I do not
understand how removing local_irq_save() around complete handler broke
things.
Have you reverted commit ed194d136769 and the revert does solve the problem ?
Between 4.19 and 4.20 we have some quite big changes in rt2x00 driver:
0240564430c0 rt2800: flush and txstatus rework for rt2800mmio
adf26a356f13 rt2x00: use different txstatus timeouts when flushing
5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet
0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib
5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib
so I'm a bit afraid that one of those changes is real cause of
the issue not ed194d136769 .
> Note that rt2x00usb_work_rxdone() processes all available entries, not
> only such for which queue_work() was called.
>
> This fixes a regression on a RT5370 based wifi stick in AP mode, which
> suddenly stopped data transmission after some period of heavy load. Also
> stopping the hanging hostapd resulted in the error message "ieee80211
> phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush".
> Other operation modes are probably affected as well, this just was
> the used testcase.
Do you know what actually make the traffic stop,
TX queue hung or RX queue hung?
> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
> index 1b08b01db27b..9c102a501ee6 100644
> --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
> +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
> @@ -263,9 +263,9 @@ EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
>
> void rt2x00lib_dmadone(struct queue_entry *entry)
> {
> - set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
> clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
> rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
> + set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
Unfortunately I do not understand how this suppose to fix the problem,
could you elaborate more about this change?
Stanislaw
^ permalink raw reply
* [PATCH] mt76: fix sparse warnings: warning: dubious: x & !y
From: Lorenzo Bianconi @ 2019-06-18 10:02 UTC (permalink / raw)
To: nbd; +Cc: lorenzo.bianconi, linux-wireless
Fix following sparse warnings in mt7603/mac.c and mt76x02_mac.c
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:113:17: warning: dubious: x & !y
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:145:16: warning: dubious: x & !y
drivers/net/wireless/mediatek/mt76/mt7603/mac.c:730:9: warning: dubious: x & !y
drivers/net/wireless/mediatek/mt76/mt7603/mac.c:790:15: warning: dubious: x & !y
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 6 ++++--
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 7 +++++--
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index ab5141701997..62e0a7f4716a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -709,6 +709,7 @@ int mt7603_wtbl_set_key(struct mt7603_dev *dev, int wcid,
{
enum mt7603_cipher_type cipher;
u32 addr = mt7603_wtbl3_addr(wcid);
+ bool key_set = !!key;
u8 key_data[32];
int key_len = sizeof(key_data);
@@ -727,7 +728,7 @@ int mt7603_wtbl_set_key(struct mt7603_dev *dev, int wcid,
mt76_rmw_field(dev, addr + 2 * 4, MT_WTBL1_W2_KEY_TYPE, cipher);
if (key)
mt76_rmw_field(dev, addr, MT_WTBL1_W0_KEY_IDX, key->keyidx);
- mt76_rmw_field(dev, addr, MT_WTBL1_W0_RX_KEY_VALID, !!key);
+ mt76_rmw_field(dev, addr, MT_WTBL1_W0_RX_KEY_VALID, key_set);
return 0;
}
@@ -745,6 +746,7 @@ mt7603_mac_write_txwi(struct mt7603_dev *dev, __le32 *txwi,
struct ieee80211_vif *vif = info->control.vif;
struct mt76_queue *q = dev->mt76.q_tx[qid].q;
struct mt7603_vif *mvif;
+ bool key_set = !!key;
int wlan_idx;
int hdr_len = ieee80211_get_hdrlen_from_skb(skb);
int tx_count = 8;
@@ -787,7 +789,7 @@ mt7603_mac_write_txwi(struct mt7603_dev *dev, __le32 *txwi,
FIELD_PREP(MT_TXD1_HDR_FORMAT, MT_HDR_FORMAT_802_11) |
FIELD_PREP(MT_TXD1_HDR_INFO, hdr_len / 2) |
FIELD_PREP(MT_TXD1_WLAN_IDX, wlan_idx) |
- FIELD_PREP(MT_TXD1_PROTECTED, !!key);
+ FIELD_PREP(MT_TXD1_PROTECTED, key_set);
txwi[1] = cpu_to_le32(val);
if (info->flags & IEEE80211_TX_CTL_NO_ACK)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
index 97621dbfd114..b3a35911deb1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
@@ -110,8 +110,10 @@ int mt76x02_mac_wcid_set_key(struct mt76x02_dev *dev, u8 idx,
memset(iv_data, 0, sizeof(iv_data));
if (key) {
+ bool pw_key = !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
+
mt76_rmw_field(dev, MT_WCID_ATTR(idx), MT_WCID_ATTR_PAIRWISE,
- !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+ pw_key);
pn = atomic64_read(&key->tx_pn);
@@ -139,10 +141,11 @@ void mt76x02_mac_wcid_setup(struct mt76x02_dev *dev, u8 idx,
u8 vif_idx, u8 *mac)
{
struct mt76_wcid_addr addr = {};
+ bool ext_id = !!(vif_idx & 8);
u32 attr;
attr = FIELD_PREP(MT_WCID_ATTR_BSS_IDX, vif_idx & 7) |
- FIELD_PREP(MT_WCID_ATTR_BSS_IDX_EXT, !!(vif_idx & 8));
+ FIELD_PREP(MT_WCID_ATTR_BSS_IDX_EXT, ext_id);
mt76_wr(dev, MT_WCID_ATTR(idx), attr);
--
2.21.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox