* [PATCH 4/5] mt76: mt76x02: fix some checkpatch warnings
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
In-Reply-To: <cover.1563772403.git.ryder.lee@mediatek.com>
This fixes the following checkpatch.pl warning:
ERROR: code indent should use tabs where possible
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Avoid precedence issues in macro
WARNING: Statements should start on a tabstop
WARNING: Unnecessary space before function pointer arguments
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
.../wireless/mediatek/mt76/mt76x0/mt76x0.h | 2 +-
.../net/wireless/mediatek/mt76/mt76x0/phy.c | 23 ++++++++-------
.../net/wireless/mediatek/mt76/mt76x0/phy.h | 10 +++----
.../net/wireless/mediatek/mt76/mt76x0/usb.c | 6 ++--
drivers/net/wireless/mediatek/mt76/mt76x02.h | 25 +++++++++--------
.../wireless/mediatek/mt76/mt76x02_beacon.c | 4 +--
.../net/wireless/mediatek/mt76/mt76x02_mac.c | 16 +++++------
.../net/wireless/mediatek/mt76/mt76x02_mcu.c | 13 +++++----
.../net/wireless/mediatek/mt76/mt76x02_mmio.c | 11 ++++----
.../net/wireless/mediatek/mt76/mt76x02_phy.c | 3 +-
.../net/wireless/mediatek/mt76/mt76x02_regs.h | 28 +++++++++----------
.../wireless/mediatek/mt76/mt76x02_trace.h | 3 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
.../net/wireless/mediatek/mt76/mt76x02_util.c | 20 ++++++-------
.../wireless/mediatek/mt76/mt76x2/eeprom.c | 10 ++++---
.../net/wireless/mediatek/mt76/mt76x2/mcu.h | 3 +-
.../wireless/mediatek/mt76/mt76x2/pci_init.c | 1 -
.../wireless/mediatek/mt76/mt76x2/pci_mcu.c | 4 +--
.../net/wireless/mediatek/mt76/mt76x2/phy.c | 3 +-
19 files changed, 99 insertions(+), 88 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
index 97e47cd2d744..caa87f0c3cb8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
@@ -55,7 +55,7 @@ int mt76x0_config(struct ieee80211_hw *hw, u32 changed);
void mt76x0_phy_init(struct mt76x02_dev *dev);
int mt76x0_phy_wait_bbp_ready(struct mt76x02_dev *dev);
int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
- struct cfg80211_chan_def *chandef);
+ struct cfg80211_chan_def *chandef);
void mt76x0_phy_set_txpower(struct mt76x02_dev *dev);
void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on);
#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index 1ecfc334ae79..bfcef33cd4c1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -109,7 +109,7 @@ mt76x0_rf_wr(struct mt76x02_dev *dev, u32 offset, u8 val)
};
WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING,
- &dev->mt76.state));
+ &dev->mt76.state));
return mt76_wr_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1);
} else {
return mt76x0_rf_csr_wr(dev, offset, val);
@@ -127,7 +127,7 @@ static int mt76x0_rf_rr(struct mt76x02_dev *dev, u32 offset)
};
WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING,
- &dev->mt76.state));
+ &dev->mt76.state));
ret = mt76_rd_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1);
val = pair.value;
} else {
@@ -230,7 +230,8 @@ mt76x0_phy_set_band(struct mt76x02_dev *dev, enum nl80211_band band)
}
static void
-mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel, u16 rf_bw_band)
+mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel,
+ u16 rf_bw_band)
{
const struct mt76x0_freq_item *freq_item;
u16 rf_band = rf_bw_band & 0xff00;
@@ -252,9 +253,9 @@ mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel, u16 rf_bw_ban
rf_band = mt76x0_frequency_plan[i].band;
if (b_sdm)
- freq_item = &(mt76x0_sdm_frequency_plan[i]);
+ freq_item = &mt76x0_sdm_frequency_plan[i];
else
- freq_item = &(mt76x0_frequency_plan[i]);
+ freq_item = &mt76x0_frequency_plan[i];
mt76x0_rf_wr(dev, MT_RF(0, 37), freq_item->pllR37);
mt76x0_rf_wr(dev, MT_RF(0, 36), freq_item->pllR36);
@@ -360,10 +361,12 @@ mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel, u16 rf_bw_ban
band = (rf_band & RF_G_BAND) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
if (mt76x02_ext_pa_enabled(dev, band)) {
/*
- MT_RF_MISC (offset: 0x0518)
- [2]1'b1: enable external A band PA, 1'b0: disable external A band PA
- [3]1'b1: enable external G band PA, 1'b0: disable external G band PA
- */
+ * MT_RF_MISC (offset: 0x0518)
+ * [2]1'b1: enable external A band PA,
+ * 1'b0: disable external A band PA
+ * [3]1'b1: enable external G band PA,
+ * 1'b0: disable external G band PA
+ */
if (rf_band & RF_A_BAND)
mt76_set(dev, MT_RF_MISC, BIT(2));
else
@@ -490,7 +493,7 @@ mt76x0_phy_bbp_set_bw(struct mt76x02_dev *dev, enum nl80211_chan_width width)
case NL80211_CHAN_WIDTH_160:
case NL80211_CHAN_WIDTH_5:
/* TODO error */
- return ;
+ return;
}
mt76x02_mcu_function_select(dev, BW_SETTING, bw);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
index b4b2ca747699..441d6559d4fd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
@@ -6,8 +6,8 @@
#ifndef _MT76X0_PHY_H_
#define _MT76X0_PHY_H_
-#define RF_G_BAND 0x0100
-#define RF_A_BAND 0x0200
+#define RF_G_BAND 0x0100
+#define RF_A_BAND 0x0200
#define RF_A_BAND_LB 0x0400
#define RF_A_BAND_MB 0x0800
#define RF_A_BAND_HB 0x1000
@@ -18,9 +18,9 @@
#define RF_BW_10 4
#define RF_BW_80 8
-#define MT_RF(bank, reg) ((bank) << 16 | (reg))
-#define MT_RF_BANK(offset) (offset >> 16)
-#define MT_RF_REG(offset) (offset & 0xff)
+#define MT_RF(bank, reg) ((bank) << 16 | (reg))
+#define MT_RF_BANK(offset) ((offset) >> 16)
+#define MT_RF_REG(offset) ((offset) & 0xff)
#define MT_RF_VCO_BP_CLOSE_LOOP BIT(3)
#define MT_RF_VCO_BP_CLOSE_LOOP_MASK GENMASK(3, 0)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
index b007bcd2e999..f010df4fad37 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -237,7 +237,7 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
if (ret)
goto err;
- /* Disable the HW, otherwise MCU fail to initalize on hot reboot */
+ /* Disable the HW, otherwise MCU fail to initialize on hot reboot */
mt76x0_chip_onoff(dev, false, false);
if (!mt76x02_wait_for_mac(mdev)) {
@@ -275,9 +275,9 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
static void mt76x0_disconnect(struct usb_interface *usb_intf)
{
struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
- bool initalized = test_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
+ bool initialized = test_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
- if (!initalized)
+ if (!initialized)
return;
ieee80211_unregister_hw(dev->mt76.hw);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02.h b/drivers/net/wireless/mediatek/mt76/mt76x02.h
index f7fd53a1738a..7fa0c9eab164 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h
@@ -71,8 +71,8 @@ struct mt76x02_calibration {
struct mt76x02_beacon_ops {
unsigned int nslots;
unsigned int slot_size;
- void (*pre_tbtt_enable) (struct mt76x02_dev *, bool);
- void (*beacon_enable) (struct mt76x02_dev *, bool);
+ void (*pre_tbtt_enable)(struct mt76x02_dev *dev, bool en);
+ void (*beacon_enable)(struct mt76x02_dev *dev, bool en);
};
struct mt76x02_dev {
@@ -137,8 +137,8 @@ extern struct ieee80211_rate mt76x02_rates[12];
void mt76x02_init_device(struct mt76x02_dev *dev);
void mt76x02_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags, u64 multicast);
+ unsigned int changed_flags,
+ unsigned int *total_flags, u64 multicast);
int mt76x02_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
void mt76x02_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
@@ -147,20 +147,20 @@ void mt76x02_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
void mt76x02_config_mac_addr_list(struct mt76x02_dev *dev);
int mt76x02_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+ struct ieee80211_vif *vif);
void mt76x02_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
+ struct ieee80211_vif *vif);
int mt76x02_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_ampdu_params *params);
+ struct ieee80211_ampdu_params *params);
int mt76x02_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key);
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key);
int mt76x02_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- u16 queue, const struct ieee80211_tx_queue_params *params);
+ u16 queue, const struct ieee80211_tx_queue_params *params);
void mt76x02_sta_rate_tbl_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta);
s8 mt76x02_tx_get_max_txpwr_adj(struct mt76x02_dev *dev,
const struct ieee80211_tx_rate *rate);
s8 mt76x02_tx_get_txpwr_adj(struct mt76x02_dev *dev, s8 txpwr,
@@ -197,6 +197,7 @@ struct beacon_bc_data {
struct sk_buff_head q;
struct sk_buff *tail[8];
};
+
void mt76x02_init_beacon_config(struct mt76x02_dev *dev);
void mt76x02e_init_beacon_config(struct mt76x02_dev *dev);
void mt76x02_resync_beacon_timer(struct mt76x02_dev *dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c b/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
index d61c686e08de..f8847fbd0ade 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c
@@ -237,7 +237,8 @@ mt76x02_add_buffered_bc(void *priv, u8 *mac, struct ieee80211_vif *vif)
}
void
-mt76x02_enqueue_buffered_bc(struct mt76x02_dev *dev, struct beacon_bc_data *data,
+mt76x02_enqueue_buffered_bc(struct mt76x02_dev *dev,
+ struct beacon_bc_data *data,
int max_nframes)
{
int i, nframes;
@@ -281,4 +282,3 @@ void mt76x02_init_beacon_config(struct mt76x02_dev *dev)
}
EXPORT_SYMBOL_GPL(mt76x02_init_beacon_config);
-
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
index 82bafb5ac326..a3917d0a5120 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
@@ -92,7 +92,6 @@ void mt76x02_mac_wcid_sync_pn(struct mt76x02_dev *dev, u8 idx,
atomic64_set(&key->tx_pn, pn);
}
-
int mt76x02_mac_wcid_set_key(struct mt76x02_dev *dev, u8 idx,
struct ieee80211_key_conf *key)
{
@@ -267,7 +266,7 @@ bool mt76x02_mac_load_tx_status(struct mt76x02_dev *dev,
static int
mt76x02_mac_process_tx_rate(struct ieee80211_tx_rate *txrate, u16 rate,
- enum nl80211_band band)
+ enum nl80211_band band)
{
u8 idx = FIELD_GET(MT_RXWI_RATE_INDEX, rate);
@@ -343,7 +342,7 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
ieee80211_has_protected(hdr->frame_control)) {
wcid = NULL;
ieee80211_get_tx_rates(info->control.vif, sta, skb,
- info->control.rates, 1);
+ info->control.rates, 1);
}
if (wcid)
@@ -353,6 +352,7 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
if (wcid && wcid->sw_iv && key) {
u64 pn = atomic64_inc_return(&key->tx_pn);
+
ccmp_pn[0] = pn;
ccmp_pn[1] = pn >> 8;
ccmp_pn[2] = 0;
@@ -445,8 +445,8 @@ mt76x02_tx_rate_fallback(struct ieee80211_tx_rate *rates, int idx, int phy)
case MT_PHY_TYPE_HT:
/* MCS 8 falls back to MCS 0 */
if (rates[0].idx == 8) {
- rates[1].idx = 0;
- break;
+ rates[1].idx = 0;
+ break;
}
/* fall through */
default:
@@ -568,9 +568,9 @@ void mt76x02_send_tx_status(struct mt76x02_dev *dev,
u32 stat_val, stat_cache;
stat_val = stat->rate;
- stat_val |= ((u32) stat->retry) << 16;
+ stat_val |= ((u32)stat->retry) << 16;
stat_cache = msta->status.rate;
- stat_cache |= ((u32) msta->status.retry) << 16;
+ stat_cache |= ((u32)msta->status.retry) << 16;
if (*update == 0 && stat_val == stat_cache &&
stat->wcid == msta->status.wcid && msta->n_frames < 32) {
@@ -718,7 +718,7 @@ mt76x02_mac_get_rssi(struct mt76x02_dev *dev, s8 rssi, int chain)
int mt76x02_mac_process_rx(struct mt76x02_dev *dev, struct sk_buff *skb,
void *rxi)
{
- struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
+ struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
struct mt76x02_rxwi *rxwi = rxi;
struct mt76x02_sta *sta;
u32 rxinfo = le32_to_cpu(rxwi->rxinfo);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
index 6501b853b65c..c1fd28dc9244 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
@@ -65,7 +65,7 @@ int mt76x02_mcu_msg_send(struct mt76_dev *mdev, int cmd, const void *data,
break;
}
- rxfce = (u32 *) skb->cb;
+ rxfce = (u32 *)skb->cb;
if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, *rxfce))
check_seq = true;
@@ -86,11 +86,11 @@ int mt76x02_mcu_function_select(struct mt76x02_dev *dev, enum mcu_function func,
u32 val)
{
struct {
- __le32 id;
- __le32 value;
+ __le32 id;
+ __le32 value;
} __packed __aligned(4) msg = {
- .id = cpu_to_le32(func),
- .value = cpu_to_le32(val),
+ .id = cpu_to_le32(func),
+ .value = cpu_to_le32(val),
};
bool wait = false;
@@ -111,7 +111,8 @@ int mt76x02_mcu_set_radio_state(struct mt76x02_dev *dev, bool on)
.level = cpu_to_le32(0),
};
- return mt76_mcu_send_msg(dev, CMD_POWER_SAVING_OP, &msg, sizeof(msg), false);
+ return mt76_mcu_send_msg(dev, CMD_POWER_SAVING_OP, &msg, sizeof(msg),
+ false);
}
EXPORT_SYMBOL_GPL(mt76x02_mcu_set_radio_state);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
index 467b28379870..8bf93684febf 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
@@ -97,7 +97,8 @@ void mt76x02e_init_beacon_config(struct mt76x02_dev *dev)
dev->beacon_ops = &beacon_ops;
/* Fire a pre-TBTT interrupt 8 ms before TBTT */
- mt76_rmw_field(dev, MT_INT_TIMER_CFG, MT_INT_TIMER_CFG_PRE_TBTT, 8 << 4);
+ mt76_rmw_field(dev, MT_INT_TIMER_CFG, MT_INT_TIMER_CFG_PRE_TBTT,
+ 8 << 4);
mt76_rmw_field(dev, MT_INT_TIMER_CFG, MT_INT_TIMER_CFG_GP_TIMER,
MT_DFS_GP_INTERVAL);
mt76_wr(dev, MT_INT_TIMER_EN, 0);
@@ -201,7 +202,7 @@ int mt76x02_dma_init(struct mt76x02_dev *dev)
return -ENOMEM;
tasklet_init(&dev->mt76.tx_tasklet, mt76x02_tx_tasklet,
- (unsigned long) dev);
+ (unsigned long)dev);
tasklet_init(&dev->mt76.pre_tbtt_tasklet, mt76x02_pre_tbtt_tasklet,
(unsigned long)dev);
@@ -395,12 +396,12 @@ static void mt76x02_key_sync(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct mt76_wcid *wcid;
if (!sta)
- return;
+ return;
- wcid = (struct mt76_wcid *) sta->drv_priv;
+ wcid = (struct mt76_wcid *)sta->drv_priv;
if (wcid->hw_key_idx != key->keyidx || wcid->sw_iv)
- return;
+ return;
mt76x02_mac_wcid_sync_pn(dev, wcid->idx, key);
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
index a54b63a96eae..b86a33b2a16d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
@@ -183,7 +183,8 @@ bool mt76x02_phy_adjust_vga_gain(struct mt76x02_dev *dev)
bool ret = false;
u32 false_cca;
- false_cca = FIELD_GET(MT_RX_STAT_1_CCA_ERRORS, mt76_rr(dev, MT_RX_STAT_1));
+ false_cca = FIELD_GET(MT_RX_STAT_1_CCA_ERRORS,
+ mt76_rr(dev, MT_RX_STAT_1));
dev->cal.false_cca = false_cca;
if (false_cca > 800 && dev->cal.agc_gain_adjust < limit) {
dev->cal.agc_gain_adjust += 2;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h b/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
index ea7833964ec0..b2868ae79290 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
@@ -19,8 +19,8 @@
#define MT_ASIC_VERSION 0x0000
-#define MT76XX_REV_E3 0x22
-#define MT76XX_REV_E4 0x33
+#define MT76XX_REV_E3 0x22
+#define MT76XX_REV_E4 0x33
#define MT_CMB_CTRL 0x0020
#define MT_CMB_CTRL_XTAL_RDY BIT(22)
@@ -120,7 +120,7 @@
#define MT_INT_RX_DONE(_n) BIT(_n)
#define MT_INT_RX_DONE_ALL GENMASK(1, 0)
#define MT_INT_TX_DONE_ALL GENMASK(13, 4)
-#define MT_INT_TX_DONE(_n) BIT(_n + 4)
+#define MT_INT_TX_DONE(_n) BIT((_n) + 4)
#define MT_INT_RX_COHERENT BIT(16)
#define MT_INT_TX_COHERENT BIT(17)
#define MT_INT_ANY_COHERENT BIT(18)
@@ -149,21 +149,21 @@
#define MT_WPDMA_DELAY_INT_CFG 0x0210
-#define MT_WMM_AIFSN 0x0214
+#define MT_WMM_AIFSN 0x0214
#define MT_WMM_AIFSN_MASK GENMASK(3, 0)
#define MT_WMM_AIFSN_SHIFT(_n) ((_n) * 4)
-#define MT_WMM_CWMIN 0x0218
+#define MT_WMM_CWMIN 0x0218
#define MT_WMM_CWMIN_MASK GENMASK(3, 0)
#define MT_WMM_CWMIN_SHIFT(_n) ((_n) * 4)
-#define MT_WMM_CWMAX 0x021c
+#define MT_WMM_CWMAX 0x021c
#define MT_WMM_CWMAX_MASK GENMASK(3, 0)
#define MT_WMM_CWMAX_SHIFT(_n) ((_n) * 4)
#define MT_WMM_TXOP_BASE 0x0220
#define MT_WMM_TXOP(_n) (MT_WMM_TXOP_BASE + (((_n) / 2) << 2))
-#define MT_WMM_TXOP_SHIFT(_n) ((_n & 1) * 16)
+#define MT_WMM_TXOP_SHIFT(_n) (((_n) & 1) * 16)
#define MT_WMM_TXOP_MASK GENMASK(15, 0)
#define MT_WMM_CTRL 0x0230 /* MT76x0 */
@@ -607,7 +607,7 @@
#define MT_TX_AGG_CNT(_id) ((_id) < 8 ? \
MT_TX_AGG_CNT_BASE0 + ((_id) << 2) : \
- MT_TX_AGG_CNT_BASE1 + ((_id - 8) << 2))
+ MT_TX_AGG_CNT_BASE1 + (((_id) - 8) << 2))
#define MT_TX_STAT_FIFO_EXT 0x1798
#define MT_TX_STAT_FIFO_EXT_RETRY GENMASK(7, 0)
@@ -680,17 +680,17 @@
#define MT_SKEY_BASE_0 0xac00
#define MT_SKEY_BASE_1 0xb400
-#define MT_SKEY_0(_bss, _idx) (MT_SKEY_BASE_0 + (4 * (_bss) + _idx) * 32)
-#define MT_SKEY_1(_bss, _idx) (MT_SKEY_BASE_1 + (4 * ((_bss) & 7) + _idx) * 32)
-#define MT_SKEY(_bss, _idx) ((_bss & 8) ? MT_SKEY_1(_bss, _idx) : MT_SKEY_0(_bss, _idx))
+#define MT_SKEY_0(_bss, _idx) (MT_SKEY_BASE_0 + (4 * (_bss) + (_idx)) * 32)
+#define MT_SKEY_1(_bss, _idx) (MT_SKEY_BASE_1 + (4 * ((_bss) & 7) + (_idx)) * 32)
+#define MT_SKEY(_bss, _idx) (((_bss) & 8) ? MT_SKEY_1(_bss, _idx) : MT_SKEY_0(_bss, _idx))
#define MT_SKEY_MODE_BASE_0 0xb000
#define MT_SKEY_MODE_BASE_1 0xb3f0
-#define MT_SKEY_MODE_0(_bss) (MT_SKEY_MODE_BASE_0 + ((_bss / 2) << 2))
+#define MT_SKEY_MODE_0(_bss) (MT_SKEY_MODE_BASE_0 + (((_bss) / 2) << 2))
#define MT_SKEY_MODE_1(_bss) (MT_SKEY_MODE_BASE_1 + ((((_bss) & 7) / 2) << 2))
-#define MT_SKEY_MODE(_bss) ((_bss & 8) ? MT_SKEY_MODE_1(_bss) : MT_SKEY_MODE_0(_bss))
+#define MT_SKEY_MODE(_bss) (((_bss) & 8) ? MT_SKEY_MODE_1(_bss) : MT_SKEY_MODE_0(_bss))
#define MT_SKEY_MODE_MASK GENMASK(3, 0)
-#define MT_SKEY_MODE_SHIFT(_bss, _idx) (4 * ((_idx) + 4 * (_bss & 1)))
+#define MT_SKEY_MODE_SHIFT(_bss, _idx) (4 * ((_idx) + 4 * ((_bss) & 1)))
#define MT_BEACON_BASE 0xc000
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_trace.h b/drivers/net/wireless/mediatek/mt76/mt76x02_trace.h
index 713f12d3c8de..ae884f539f3f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_trace.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_trace.h
@@ -25,7 +25,8 @@
#define MAXNAME 32
#define DEV_ENTRY __array(char, wiphy_name, 32)
-#define DEV_ASSIGN strlcpy(__entry->wiphy_name, wiphy_name(mt76_hw(dev)->wiphy), MAXNAME)
+#define DEV_ASSIGN strlcpy(__entry->wiphy_name, \
+ wiphy_name(mt76_hw(dev)->wiphy), MAXNAME)
#define DEV_PR_FMT "%s"
#define DEV_PR_ARG __entry->wiphy_name
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
index 5e4f3a8c5784..e4332d5a5757 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
@@ -53,7 +53,7 @@ int mt76x02u_skb_dma_info(struct sk_buff *skb, int port, u32 flags)
pad = round_up(skb->len, 4) + 4 - skb->len;
/* First packet of a A-MSDU burst keeps track of the whole burst
- * length, need to update lenght of it and the last packet.
+ * length, need to update length of it and the last packet.
*/
skb_walk_frags(skb, iter) {
last = iter;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index fa45ed280ab1..e84006cd6f9a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -21,14 +21,14 @@
#define CCK_RATE(_idx, _rate) { \
.bitrate = _rate, \
.flags = IEEE80211_RATE_SHORT_PREAMBLE, \
- .hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \
- .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \
+ .hw_value = (MT_PHY_TYPE_CCK << 8) | (_idx), \
+ .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + (_idx)), \
}
#define OFDM_RATE(_idx, _rate) { \
.bitrate = _rate, \
- .hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \
- .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \
+ .hw_value = (MT_PHY_TYPE_OFDM << 8) | (_idx), \
+ .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | (_idx), \
}
struct ieee80211_rate mt76x02_rates[] = {
@@ -281,7 +281,7 @@ mt76x02_vif_init(struct mt76x02_dev *dev, struct ieee80211_vif *vif,
mvif->idx = idx;
mvif->group_wcid.idx = MT_VIF_WCID(idx);
mvif->group_wcid.hw_key_idx = -1;
- mtxq = (struct mt76_txq *) vif->txq->drv_priv;
+ mtxq = (struct mt76_txq *)vif->txq->drv_priv;
mtxq->wcid = &mvif->group_wcid;
mt76_txq_init(&dev->mt76, vif->txq);
@@ -345,7 +345,7 @@ int mt76x02_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action = params->action;
struct ieee80211_sta *sta = params->sta;
struct mt76x02_dev *dev = hw->priv;
- struct mt76x02_sta *msta = (struct mt76x02_sta *) sta->drv_priv;
+ struct mt76x02_sta *msta = (struct mt76x02_sta *)sta->drv_priv;
struct ieee80211_txq *txq = sta->txq[params->tid];
u16 tid = params->tid;
u16 ssn = params->ssn;
@@ -434,7 +434,7 @@ int mt76x02_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
return -EOPNOTSUPP;
- msta = sta ? (struct mt76x02_sta *) sta->drv_priv : NULL;
+ msta = sta ? (struct mt76x02_sta *)sta->drv_priv : NULL;
wcid = msta ? &msta->wcid : &mvif->group_wcid;
if (cmd == SET_KEY) {
@@ -558,11 +558,11 @@ int mt76x02_set_rts_threshold(struct ieee80211_hw *hw, u32 val)
EXPORT_SYMBOL_GPL(mt76x02_set_rts_threshold);
void mt76x02_sta_rate_tbl_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
{
struct mt76x02_dev *dev = hw->priv;
- struct mt76x02_sta *msta = (struct mt76x02_sta *) sta->drv_priv;
+ struct mt76x02_sta *msta = (struct mt76x02_sta *)sta->drv_priv;
struct ieee80211_sta_rates *rates = rcu_dereference(sta->rates);
struct ieee80211_tx_rate rate = {};
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c
index 6f6998561d9d..f17058346ff1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/eeprom.c
@@ -33,7 +33,7 @@ mt76x2_eeprom_get_macaddr(struct mt76x02_dev *dev)
static bool
mt76x2_has_cal_free_data(struct mt76x02_dev *dev, u8 *efuse)
{
- u16 *efuse_w = (u16 *) efuse;
+ u16 *efuse_w = (u16 *)efuse;
if (efuse_w[MT_EE_NIC_CONF_0] != 0)
return false;
@@ -372,7 +372,8 @@ mt76x2_get_power_info_2g(struct mt76x02_dev *dev,
t->chain[chain].tssi_slope = data[0];
t->chain[chain].tssi_offset = data[1];
t->chain[chain].target_power = data[2];
- t->chain[chain].delta = mt76x02_sign_extend_optional(data[delta_idx], 7);
+ t->chain[chain].delta =
+ mt76x02_sign_extend_optional(data[delta_idx], 7);
val = mt76x02_eeprom_get(dev, MT_EE_RF_2G_TSSI_OFF_TXPOWER);
t->target_power = val >> 8;
@@ -381,7 +382,7 @@ mt76x2_get_power_info_2g(struct mt76x02_dev *dev,
static void
mt76x2_get_power_info_5g(struct mt76x02_dev *dev,
struct mt76x2_tx_power_info *t,
- struct ieee80211_channel *chan,
+ struct ieee80211_channel *chan,
int chain, int offset)
{
int channel = chan->hw_value;
@@ -423,7 +424,8 @@ mt76x2_get_power_info_5g(struct mt76x02_dev *dev,
t->chain[chain].tssi_slope = data[0];
t->chain[chain].tssi_offset = data[1];
t->chain[chain].target_power = data[2];
- t->chain[chain].delta = mt76x02_sign_extend_optional(data[delta_idx], 7);
+ t->chain[chain].delta =
+ mt76x02_sign_extend_optional(data[delta_idx], 7);
val = mt76x02_eeprom_get(dev, MT_EE_RF_2G_RX_HIGH_GAIN);
t->target_power = val & 0xff;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/mcu.h b/drivers/net/wireless/mediatek/mt76/mt76x2/mcu.h
index 40ef43926c06..75f1b2acb141 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/mcu.h
@@ -71,7 +71,8 @@ struct mt76x2_tssi_comp {
u8 offset1;
} __packed __aligned(4);
-int mt76x2_mcu_tssi_comp(struct mt76x02_dev *dev, struct mt76x2_tssi_comp *tssi_data);
+int mt76x2_mcu_tssi_comp(struct mt76x02_dev *dev,
+ struct mt76x2_tssi_comp *tssi_data);
int mt76x2_mcu_init_gain(struct mt76x02_dev *dev, u8 channel, u32 gain,
bool force);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c
index 71aea2832644..b8f657517f37 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c
@@ -336,4 +336,3 @@ int mt76x2_register_device(struct mt76x02_dev *dev)
return ret;
}
-
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_mcu.c
index 605dc66ae83b..e38715c1bcad 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_mcu.c
@@ -66,7 +66,7 @@ mt76pci_load_rom_patch(struct mt76x02_dev *dev)
mt76_wr(dev, MT_MCU_PCIE_REMAP_BASE4, MT_MCU_ROM_PATCH_OFFSET);
- cur = (__le32 *) (fw->data + sizeof(*hdr));
+ cur = (__le32 *)(fw->data + sizeof(*hdr));
len = fw->size - sizeof(*hdr);
mt76_wr_copy(dev, MT_MCU_ROM_PATCH_ADDR, cur, len);
@@ -121,7 +121,7 @@ mt76pci_load_firmware(struct mt76x02_dev *dev)
dev_info(dev->mt76.dev, "Build: %x\n", val);
dev_info(dev->mt76.dev, "Build Time: %.16s\n", hdr->build_time);
- cur = (__le32 *) (fw->data + sizeof(*hdr));
+ cur = (__le32 *)(fw->data + sizeof(*hdr));
len = le32_to_cpu(hdr->ilm_len);
mt76_wr(dev, MT_MCU_PCIE_REMAP_BASE4, MT_MCU_ILM_OFFSET);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
index cdedf95ca4f5..57212b049ee2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
@@ -25,7 +25,8 @@ mt76x2_adjust_high_lna_gain(struct mt76x02_dev *dev, int reg, s8 offset)
{
s8 gain;
- gain = FIELD_GET(MT_BBP_AGC_LNA_HIGH_GAIN, mt76_rr(dev, MT_BBP(AGC, reg)));
+ gain = FIELD_GET(MT_BBP_AGC_LNA_HIGH_GAIN,
+ mt76_rr(dev, MT_BBP(AGC, reg)));
gain -= offset / 2;
mt76_rmw_field(dev, MT_BBP(AGC, reg), MT_BBP_AGC_LNA_HIGH_GAIN, gain);
}
--
2.18.0
^ permalink raw reply related
* [PATCH 5/5] mt76: fix some checkpatch warnings
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
In-Reply-To: <cover.1563772403.git.ryder.lee@mediatek.com>
This fixes the following checkpatch.pl warning:
ERROR: Macros with complex values should be enclosed in parentheses
CHECK: Alignment should match open parenthesis
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/agg-rx.c | 21 +++++----
drivers/net/wireless/mediatek/mt76/dma.c | 2 +-
drivers/net/wireless/mediatek/mt76/mac80211.c | 30 ++++++------
drivers/net/wireless/mediatek/mt76/mt76.h | 46 +++++++++----------
drivers/net/wireless/mediatek/mt76/trace.h | 9 ++--
drivers/net/wireless/mediatek/mt76/tx.c | 18 ++++----
drivers/net/wireless/mediatek/mt76/usb.c | 31 +++++++------
.../net/wireless/mediatek/mt76/usb_trace.h | 11 +++--
drivers/net/wireless/mediatek/mt76/util.h | 4 +-
9 files changed, 89 insertions(+), 83 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 27e3ff039c48..4d33efdb3555 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -34,8 +34,9 @@ mt76_aggr_release(struct mt76_rx_tid *tid, struct sk_buff_head *frames, int idx)
}
static void
-mt76_rx_aggr_release_frames(struct mt76_rx_tid *tid, struct sk_buff_head *frames,
- u16 head)
+mt76_rx_aggr_release_frames(struct mt76_rx_tid *tid,
+ struct sk_buff_head *frames,
+ u16 head)
{
int idx;
@@ -74,15 +75,14 @@ mt76_rx_aggr_check_release(struct mt76_rx_tid *tid, struct sk_buff_head *frames)
for (idx = (tid->head + 1) % tid->size;
idx != start && nframes;
idx = (idx + 1) % tid->size) {
-
skb = tid->reorder_buf[idx];
if (!skb)
continue;
nframes--;
- status = (struct mt76_rx_status *) skb->cb;
+ status = (struct mt76_rx_status *)skb->cb;
if (!time_after(jiffies, status->reorder_time +
- REORDER_TIMEOUT))
+ REORDER_TIMEOUT))
continue;
mt76_rx_aggr_release_frames(tid, frames, status->seqno);
@@ -122,8 +122,8 @@ mt76_rx_aggr_reorder_work(struct work_struct *work)
static void
mt76_rx_aggr_check_ctl(struct sk_buff *skb, struct sk_buff_head *frames)
{
- struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
- struct ieee80211_bar *bar = (struct ieee80211_bar *) skb->data;
+ struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+ struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data;
struct mt76_wcid *wcid = status->wcid;
struct mt76_rx_tid *tid;
u16 seqno;
@@ -148,8 +148,8 @@ mt76_rx_aggr_check_ctl(struct sk_buff *skb, struct sk_buff_head *frames)
void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
{
- struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct mt76_wcid *wcid = status->wcid;
struct ieee80211_sta *sta;
struct mt76_rx_tid *tid;
@@ -233,7 +233,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
tid->nframes++;
mt76_rx_aggr_release_head(tid, frames);
- ieee80211_queue_delayed_work(tid->dev->hw, &tid->reorder_work, REORDER_TIMEOUT);
+ ieee80211_queue_delayed_work(tid->dev->hw, &tid->reorder_work,
+ REORDER_TIMEOUT);
out:
spin_unlock_bh(&tid->lock);
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index d8f61e540bfd..bb223faa740f 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -504,7 +504,7 @@ mt76_dma_rx_process(struct mt76_dev *dev, struct mt76_queue *q, int budget)
skb_reserve(skb, q->buf_offset);
if (q == &dev->q_rx[MT_RXQ_MCU]) {
- u32 *rxfce = (u32 *) skb->cb;
+ u32 *rxfce = (u32 *)skb->cb;
*rxfce = info;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index ec9efb79985f..20b8c0f9048e 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -502,7 +502,7 @@ struct ieee80211_sta *mt76_rx_convert(struct sk_buff *skb)
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct mt76_rx_status mstat;
- mstat = *((struct mt76_rx_status *) skb->cb);
+ mstat = *((struct mt76_rx_status *)skb->cb);
memset(status, 0, sizeof(*status));
status->flag = mstat.flag;
@@ -517,8 +517,10 @@ struct ieee80211_sta *mt76_rx_convert(struct sk_buff *skb)
status->chains = mstat.chains;
BUILD_BUG_ON(sizeof(mstat) > sizeof(skb->cb));
- BUILD_BUG_ON(sizeof(status->chain_signal) != sizeof(mstat.chain_signal));
- memcpy(status->chain_signal, mstat.chain_signal, sizeof(mstat.chain_signal));
+ BUILD_BUG_ON(sizeof(status->chain_signal) !=
+ sizeof(mstat.chain_signal));
+ memcpy(status->chain_signal, mstat.chain_signal,
+ sizeof(mstat.chain_signal));
return wcid_to_sta(mstat.wcid);
}
@@ -527,7 +529,7 @@ EXPORT_SYMBOL(mt76_rx_convert);
static int
mt76_check_ccmp_pn(struct sk_buff *skb)
{
- struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
+ struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
struct mt76_wcid *wcid = status->wcid;
struct ieee80211_hdr *hdr;
int ret;
@@ -543,7 +545,7 @@ mt76_check_ccmp_pn(struct sk_buff *skb)
* Validate the first fragment both here and in mac80211
* All further fragments will be validated by mac80211 only.
*/
- hdr = (struct ieee80211_hdr *) skb->data;
+ hdr = (struct ieee80211_hdr *)skb->data;
if (ieee80211_is_frag(hdr) &&
!ieee80211_is_first_frag(hdr->frame_control))
return 0;
@@ -566,8 +568,8 @@ mt76_check_ccmp_pn(struct sk_buff *skb)
static void
mt76_check_sta(struct mt76_dev *dev, struct sk_buff *skb)
{
- struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct mt76_rx_status *status = (struct mt76_rx_status *)skb->cb;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_sta *sta;
struct mt76_wcid *wcid = status->wcid;
bool ps;
@@ -576,13 +578,13 @@ mt76_check_sta(struct mt76_dev *dev, struct sk_buff *skb)
if (ieee80211_is_pspoll(hdr->frame_control) && !wcid) {
sta = ieee80211_find_sta_by_ifaddr(dev->hw, hdr->addr2, NULL);
if (sta)
- wcid = status->wcid = (struct mt76_wcid *) sta->drv_priv;
+ wcid = status->wcid = (struct mt76_wcid *)sta->drv_priv;
}
if (!wcid || !wcid->sta)
return;
- sta = container_of((void *) wcid, struct ieee80211_sta, drv_priv);
+ sta = container_of((void *)wcid, struct ieee80211_sta, drv_priv);
if (status->signal <= 0)
ewma_signal_add(&wcid->rssi, -status->signal);
@@ -598,8 +600,8 @@ mt76_check_sta(struct mt76_dev *dev, struct sk_buff *skb)
}
if (ieee80211_has_morefrags(hdr->frame_control) ||
- !(ieee80211_is_mgmt(hdr->frame_control) ||
- ieee80211_is_data(hdr->frame_control)))
+ !(ieee80211_is_mgmt(hdr->frame_control) ||
+ ieee80211_is_data(hdr->frame_control)))
return;
ps = ieee80211_has_pm(hdr->frame_control);
@@ -628,7 +630,7 @@ mt76_check_sta(struct mt76_dev *dev, struct sk_buff *skb)
if (!sta->txq[i])
continue;
- mtxq = (struct mt76_txq *) sta->txq[i]->drv_priv;
+ mtxq = (struct mt76_txq *)sta->txq[i]->drv_priv;
if (!skb_queue_empty(&mtxq->retry_q))
ieee80211_schedule_txq(dev->hw, sta->txq[i]);
}
@@ -750,7 +752,7 @@ int mt76_sta_state(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev->drv->sta_assoc(dev, vif, sta);
if (old_state == IEEE80211_STA_NONE &&
- new_state == IEEE80211_STA_NOTEXIST)
+ new_state == IEEE80211_STA_NOTEXIST)
mt76_sta_remove(dev, vif, sta);
return 0;
@@ -790,7 +792,7 @@ static void
__mt76_csa_finish(void *priv, u8 *mac, struct ieee80211_vif *vif)
{
if (vif->csa_active && ieee80211_csa_is_complete(vif))
- ieee80211_csa_finish(vif);
+ ieee80211_csa_finish(vif);
}
void mt76_csa_finish(struct mt76_dev *dev)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 094e6e543542..376c944704c1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -537,25 +537,25 @@ struct mt76_rx_status {
s8 chain_signal[IEEE80211_MAX_CHAINS];
};
-#define __mt76_rr(dev, ...) (dev)->bus->rr((dev), __VA_ARGS__)
-#define __mt76_wr(dev, ...) (dev)->bus->wr((dev), __VA_ARGS__)
-#define __mt76_rmw(dev, ...) (dev)->bus->rmw((dev), __VA_ARGS__)
-#define __mt76_wr_copy(dev, ...) (dev)->bus->copy((dev), __VA_ARGS__)
+#define __mt76_rr(dev, ...) ((dev)->bus->rr((dev), __VA_ARGS__))
+#define __mt76_wr(dev, ...) ((dev)->bus->wr((dev), __VA_ARGS__))
+#define __mt76_rmw(dev, ...) ((dev)->bus->rmw((dev), __VA_ARGS__))
+#define __mt76_wr_copy(dev, ...) ((dev)->bus->copy((dev), __VA_ARGS__))
#define __mt76_set(dev, offset, val) __mt76_rmw(dev, offset, 0, val)
#define __mt76_clear(dev, offset, val) __mt76_rmw(dev, offset, val, 0)
-#define mt76_rr(dev, ...) (dev)->mt76.bus->rr(&((dev)->mt76), __VA_ARGS__)
-#define mt76_wr(dev, ...) (dev)->mt76.bus->wr(&((dev)->mt76), __VA_ARGS__)
-#define mt76_rmw(dev, ...) (dev)->mt76.bus->rmw(&((dev)->mt76), __VA_ARGS__)
-#define mt76_wr_copy(dev, ...) (dev)->mt76.bus->copy(&((dev)->mt76), __VA_ARGS__)
-#define mt76_wr_rp(dev, ...) (dev)->mt76.bus->wr_rp(&((dev)->mt76), __VA_ARGS__)
-#define mt76_rd_rp(dev, ...) (dev)->mt76.bus->rd_rp(&((dev)->mt76), __VA_ARGS__)
+#define mt76_rr(dev, ...) ((dev)->mt76.bus->rr(&((dev)->mt76), __VA_ARGS__))
+#define mt76_wr(dev, ...) ((dev)->mt76.bus->wr(&((dev)->mt76), __VA_ARGS__))
+#define mt76_rmw(dev, ...) ((dev)->mt76.bus->rmw(&((dev)->mt76), __VA_ARGS__))
+#define mt76_wr_copy(dev, ...) ((dev)->mt76.bus->copy(&((dev)->mt76), __VA_ARGS__))
+#define mt76_wr_rp(dev, ...) ((dev)->mt76.bus->wr_rp(&((dev)->mt76), __VA_ARGS__))
+#define mt76_rd_rp(dev, ...) ((dev)->mt76.bus->rd_rp(&((dev)->mt76), __VA_ARGS__))
-#define mt76_mcu_send_msg(dev, ...) (dev)->mt76.mcu_ops->mcu_send_msg(&((dev)->mt76), __VA_ARGS__)
-#define __mt76_mcu_send_msg(dev, ...) (dev)->mcu_ops->mcu_send_msg((dev), __VA_ARGS__)
-#define mt76_mcu_restart(dev, ...) (dev)->mt76.mcu_ops->mcu_restart(&((dev)->mt76))
-#define __mt76_mcu_restart(dev, ...) (dev)->mcu_ops->mcu_restart((dev))
+#define mt76_mcu_send_msg(dev, ...) ((dev)->mt76.mcu_ops->mcu_send_msg(&((dev)->mt76), __VA_ARGS__))
+#define __mt76_mcu_send_msg(dev, ...) ((dev)->mcu_ops->mcu_send_msg((dev), __VA_ARGS__))
+#define mt76_mcu_restart(dev, ...) ((dev)->mt76.mcu_ops->mcu_restart(&((dev)->mt76)))
+#define __mt76_mcu_restart(dev, ...) ((dev)->mcu_ops->mcu_restart((dev)))
#define mt76_set(dev, offset, val) mt76_rmw(dev, offset, 0, val)
#define mt76_clear(dev, offset, val) mt76_rmw(dev, offset, val, 0)
@@ -569,7 +569,7 @@ struct mt76_rx_status {
#define __mt76_rmw_field(_dev, _reg, _field, _val) \
__mt76_rmw(_dev, _reg, _field, FIELD_PREP(_field, _val))
-#define mt76_hw(dev) (dev)->mt76.hw
+#define mt76_hw(dev) ((dev)->mt76.hw)
bool __mt76_poll(struct mt76_dev *dev, u32 offset, u32 mask, u32 val,
int timeout);
@@ -596,13 +596,13 @@ static inline u16 mt76_rev(struct mt76_dev *dev)
#define mt76xx_chip(dev) mt76_chip(&((dev)->mt76))
#define mt76xx_rev(dev) mt76_rev(&((dev)->mt76))
-#define mt76_init_queues(dev) (dev)->mt76.queue_ops->init(&((dev)->mt76))
-#define mt76_queue_alloc(dev, ...) (dev)->mt76.queue_ops->alloc(&((dev)->mt76), __VA_ARGS__)
-#define mt76_tx_queue_skb_raw(dev, ...) (dev)->mt76.queue_ops->tx_queue_skb_raw(&((dev)->mt76), __VA_ARGS__)
-#define mt76_tx_queue_skb(dev, ...) (dev)->mt76.queue_ops->tx_queue_skb(&((dev)->mt76), __VA_ARGS__)
-#define mt76_queue_rx_reset(dev, ...) (dev)->mt76.queue_ops->rx_reset(&((dev)->mt76), __VA_ARGS__)
-#define mt76_queue_tx_cleanup(dev, ...) (dev)->mt76.queue_ops->tx_cleanup(&((dev)->mt76), __VA_ARGS__)
-#define mt76_queue_kick(dev, ...) (dev)->mt76.queue_ops->kick(&((dev)->mt76), __VA_ARGS__)
+#define mt76_init_queues(dev) ((dev)->mt76.queue_ops->init(&((dev)->mt76)))
+#define mt76_queue_alloc(dev, ...) ((dev)->mt76.queue_ops->alloc(&((dev)->mt76), __VA_ARGS__))
+#define mt76_tx_queue_skb_raw(dev, ...) ((dev)->mt76.queue_ops->tx_queue_skb_raw(&((dev)->mt76), __VA_ARGS__))
+#define mt76_tx_queue_skb(dev, ...) ((dev)->mt76.queue_ops->tx_queue_skb(&((dev)->mt76), __VA_ARGS__))
+#define mt76_queue_rx_reset(dev, ...) ((dev)->mt76.queue_ops->rx_reset(&((dev)->mt76), __VA_ARGS__))
+#define mt76_queue_tx_cleanup(dev, ...) ((dev)->mt76.queue_ops->tx_cleanup(&((dev)->mt76), __VA_ARGS__))
+#define mt76_queue_kick(dev, ...) ((dev)->mt76.queue_ops->kick(&((dev)->mt76), __VA_ARGS__))
static inline struct mt76_channel_state *
mt76_channel_state(struct mt76_dev *dev, struct ieee80211_channel *c)
@@ -677,7 +677,7 @@ static inline struct mt76_tx_cb *mt76_tx_skb_cb(struct sk_buff *skb)
{
BUILD_BUG_ON(sizeof(struct mt76_tx_cb) >
sizeof(IEEE80211_SKB_CB(skb)->status.status_driver_data));
- return ((void *) IEEE80211_SKB_CB(skb)->status.status_driver_data);
+ return ((void *)IEEE80211_SKB_CB(skb)->status.status_driver_data);
}
static inline void mt76_insert_hdr_pad(struct sk_buff *skb)
diff --git a/drivers/net/wireless/mediatek/mt76/trace.h b/drivers/net/wireless/mediatek/mt76/trace.h
index ea30895933c5..06fc21a43a1f 100644
--- a/drivers/net/wireless/mediatek/mt76/trace.h
+++ b/drivers/net/wireless/mediatek/mt76/trace.h
@@ -24,10 +24,11 @@
#define TRACE_SYSTEM mt76
#define MAXNAME 32
-#define DEV_ENTRY __array(char, wiphy_name, 32)
-#define DEV_ASSIGN strlcpy(__entry->wiphy_name, wiphy_name(dev->hw->wiphy), MAXNAME)
-#define DEV_PR_FMT "%s"
-#define DEV_PR_ARG __entry->wiphy_name
+#define DEV_ENTRY __array(char, wiphy_name, 32)
+#define DEV_ASSIGN strlcpy(__entry->wiphy_name, \
+ wiphy_name(dev->hw->wiphy), MAXNAME)
+#define DEV_PR_FMT "%s"
+#define DEV_PR_ARG __entry->wiphy_name
#define REG_ENTRY __field(u32, reg) __field(u32, val)
#define REG_ASSIGN __entry->reg = reg; __entry->val = val
diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index 5397827668b9..3b73f3b3f576 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -97,7 +97,7 @@ mt76_txq_get_qid(struct ieee80211_txq *txq)
static void
mt76_check_agg_ssn(struct mt76_txq *mtxq, struct sk_buff *skb)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (!ieee80211_is_data_qos(hdr->frame_control) ||
!ieee80211_is_data_present(hdr->frame_control))
@@ -217,8 +217,8 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
if (cb->pktid == pktid)
return skb;
- if (pktid >= 0 &&
- !time_after(jiffies, cb->jiffies + MT_TX_STATUS_SKB_TIMEOUT))
+ if (pktid >= 0 && !time_after(jiffies, cb->jiffies +
+ MT_TX_STATUS_SKB_TIMEOUT))
continue;
__mt76_tx_status_skb_done(dev, skb, MT_TX_CB_TXS_FAILED |
@@ -260,7 +260,7 @@ mt76_tx(struct mt76_dev *dev, struct ieee80211_sta *sta,
struct mt76_wcid *wcid, struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct mt76_queue *q;
int qid = skb_get_queue_mapping(skb);
@@ -280,7 +280,7 @@ mt76_tx(struct mt76_dev *dev, struct ieee80211_sta *sta,
tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
txq = sta->txq[tid];
- mtxq = (struct mt76_txq *) txq->drv_priv;
+ mtxq = (struct mt76_txq *)txq->drv_priv;
if (mtxq->aggr)
mt76_check_agg_ssn(mtxq, skb);
@@ -328,7 +328,7 @@ static void
mt76_queue_ps_skb(struct mt76_dev *dev, struct ieee80211_sta *sta,
struct sk_buff *skb, bool last)
{
- struct mt76_wcid *wcid = (struct mt76_wcid *) sta->drv_priv;
+ struct mt76_wcid *wcid = (struct mt76_wcid *)sta->drv_priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
info->control.flags |= IEEE80211_TX_CTRL_PS_RESPONSE;
@@ -354,7 +354,7 @@ mt76_release_buffered_frames(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
spin_lock_bh(&hwq->lock);
for (i = 0; tids && nframes; i++, tids >>= 1) {
struct ieee80211_txq *txq = sta->txq[i];
- struct mt76_txq *mtxq = (struct mt76_txq *) txq->drv_priv;
+ struct mt76_txq *mtxq = (struct mt76_txq *)txq->drv_priv;
struct sk_buff *skb;
if (!(tids & 1))
@@ -610,7 +610,7 @@ void mt76_txq_remove(struct mt76_dev *dev, struct ieee80211_txq *txq)
if (!txq)
return;
- mtxq = (struct mt76_txq *) txq->drv_priv;
+ mtxq = (struct mt76_txq *)txq->drv_priv;
while ((skb = skb_dequeue(&mtxq->retry_q)) != NULL)
ieee80211_free_txskb(dev->hw, skb);
@@ -619,7 +619,7 @@ EXPORT_SYMBOL_GPL(mt76_txq_remove);
void mt76_txq_init(struct mt76_dev *dev, struct ieee80211_txq *txq)
{
- struct mt76_txq *mtxq = (struct mt76_txq *) txq->drv_priv;
+ struct mt76_txq *mtxq = (struct mt76_txq *)txq->drv_priv;
skb_queue_head_init(&mtxq->retry_q);
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 00069c2536f8..76fed459ae58 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -165,7 +165,7 @@ static void mt76u_copy(struct mt76_dev *dev, u32 offset,
mutex_lock(&usb->usb_ctrl_mtx);
for (i = 0; i < DIV_ROUND_UP(len, 4); i++) {
- put_unaligned(val[i], (u32 *) usb->data);
+ put_unaligned(val[i], (u32 *)usb->data);
ret = __mt76u_vendor_request(dev, MT_VEND_MULTI_WRITE,
USB_DIR_OUT | USB_TYPE_VENDOR,
0, offset + i * 4, usb->data,
@@ -320,14 +320,13 @@ mt76u_refill_rx(struct mt76_dev *dev, struct urb *urb, int nsgs, gfp_t gfp)
{
struct mt76_queue *q = &dev->q_rx[MT_RXQ_MAIN];
- if (dev->usb.sg_en) {
+ if (dev->usb.sg_en)
return mt76u_fill_rx_sg(dev, q, urb, nsgs, gfp);
- } else {
- urb->transfer_buffer_length = q->buf_size;
- urb->transfer_buffer = page_frag_alloc(&q->rx_page,
- q->buf_size, gfp);
- return urb->transfer_buffer ? 0 : -ENOMEM;
- }
+
+ urb->transfer_buffer_length = q->buf_size;
+ urb->transfer_buffer = page_frag_alloc(&q->rx_page, q->buf_size, gfp);
+
+ return urb->transfer_buffer ? 0 : -ENOMEM;
}
static int
@@ -735,13 +734,14 @@ mt76u_tx_setup_buffers(struct mt76_dev *dev, struct sk_buff *skb,
if (!dev->usb.sg_en) {
urb->transfer_buffer = skb->data;
return 0;
- } else {
- sg_init_table(urb->sg, MT_TX_SG_MAX_SIZE);
- urb->num_sgs = skb_to_sgvec(skb, urb->sg, 0, skb->len);
- if (urb->num_sgs == 0)
- return -ENOMEM;
- return urb->num_sgs;
}
+
+ sg_init_table(urb->sg, MT_TX_SG_MAX_SIZE);
+ urb->num_sgs = skb_to_sgvec(skb, urb->sg, 0, skb->len);
+ if (!urb->num_sgs)
+ return -ENOMEM;
+
+ return urb->num_sgs;
}
static int
@@ -857,7 +857,8 @@ void mt76u_stop_tx(struct mt76_dev *dev)
struct mt76_queue *q;
int i, j, ret;
- ret = wait_event_timeout(dev->tx_wait, !mt76_has_tx_pending(dev), HZ/5);
+ ret = wait_event_timeout(dev->tx_wait, !mt76_has_tx_pending(dev),
+ HZ / 5);
if (!ret) {
dev_err(dev->dev, "timed out waiting for pending tx\n");
diff --git a/drivers/net/wireless/mediatek/mt76/usb_trace.h b/drivers/net/wireless/mediatek/mt76/usb_trace.h
index b56c32343eb1..518ad1a26e21 100644
--- a/drivers/net/wireless/mediatek/mt76/usb_trace.h
+++ b/drivers/net/wireless/mediatek/mt76/usb_trace.h
@@ -24,10 +24,11 @@
#define TRACE_SYSTEM mt76_usb
#define MAXNAME 32
-#define DEV_ENTRY __array(char, wiphy_name, 32)
-#define DEV_ASSIGN strlcpy(__entry->wiphy_name, wiphy_name(dev->hw->wiphy), MAXNAME)
-#define DEV_PR_FMT "%s "
-#define DEV_PR_ARG __entry->wiphy_name
+#define DEV_ENTRY __array(char, wiphy_name, 32)
+#define DEV_ASSIGN strlcpy(__entry->wiphy_name, \
+ wiphy_name(dev->hw->wiphy), MAXNAME)
+#define DEV_PR_FMT "%s "
+#define DEV_PR_ARG __entry->wiphy_name
#define REG_ENTRY __field(u32, reg) __field(u32, val)
#define REG_ASSIGN __entry->reg = reg; __entry->val = val
@@ -65,7 +66,7 @@ DECLARE_EVENT_CLASS(urb_transfer,
TP_PROTO(struct mt76_dev *dev, struct urb *u),
TP_ARGS(dev, u),
TP_STRUCT__entry(
- DEV_ENTRY __field(unsigned, pipe) __field(u32, len)
+ DEV_ENTRY __field(unsigned int, pipe) __field(u32, len)
),
TP_fast_assign(
DEV_ASSIGN;
diff --git a/drivers/net/wireless/mediatek/mt76/util.h b/drivers/net/wireless/mediatek/mt76/util.h
index 9f8d59269a9e..fe3479c8e561 100644
--- a/drivers/net/wireless/mediatek/mt76/util.h
+++ b/drivers/net/wireless/mediatek/mt76/util.h
@@ -12,7 +12,7 @@
#include <linux/bitfield.h>
#define MT76_INCR(_var, _size) \
- _var = (((_var) + 1) % _size)
+ (_var = (((_var) + 1) % (_size)))
int mt76_wcid_alloc(unsigned long *mask, int size);
@@ -25,7 +25,7 @@ mt76_wcid_free(unsigned long *mask, int idx)
static inline void
mt76_skb_set_moredata(struct sk_buff *skb, bool enable)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (enable)
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
--
2.18.0
^ permalink raw reply related
* [PATCH 2/5] mt76: mt7603: fix some checkpatch warnings
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
In-Reply-To: <cover.1563772403.git.ryder.lee@mediatek.com>
This fixes the following checkpatch.pl warning:
WARNING: Improper SPDX comment style
CHECK: No space is necessary after a cast
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7603/beacon.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/core.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/dma.c | 7 ++++---
drivers/net/wireless/mediatek/mt76/mt7603/eeprom.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 3 +--
drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 6 +++---
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 7 ++++---
drivers/net/wireless/mediatek/mt76/mt7603/mcu.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/pci.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/soc.c | 2 +-
11 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c b/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
index 58e68fbdbf75..7a41cdf1c4ae 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7603.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/core.c b/drivers/net/wireless/mediatek/mt76/mt7603/core.c
index e7ee58e3379c..e5af4f3389cc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/core.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7603.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
index a1bc3103cbe9..5942fe76c6e9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7603.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
index 58dc511f93c5..79dc3b97dfe8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7603.h"
#include "mac.h"
@@ -63,7 +63,7 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
txd[0] = cpu_to_le32(val);
sta = container_of(priv, struct ieee80211_sta, drv_priv);
- hdr = (struct ieee80211_hdr *) &skb->data[MT_TXD_SIZE];
+ hdr = (struct ieee80211_hdr *)&skb->data[MT_TXD_SIZE];
tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
ieee80211_sta_set_buffered(sta, tid, true);
@@ -181,7 +181,8 @@ int mt7603_dma_init(struct mt7603_dev *dev)
init_waitqueue_head(&dev->mt76.mmio.mcu.wait);
skb_queue_head_init(&dev->mt76.mmio.mcu.res_q);
- tasklet_init(&dev->mt76.tx_tasklet, mt7603_tx_tasklet, (unsigned long)dev);
+ tasklet_init(&dev->mt76.tx_tasklet, mt7603_tx_tasklet,
+ (unsigned long)dev);
mt76_clear(dev, MT_WPDMA_GLO_CFG,
MT_WPDMA_GLO_CFG_TX_DMA_EN |
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.c
index 8c120e4461b0..2b6a4d8a8dc7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7603.h"
#include "eeprom.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index 568e57e1d69c..ad2ccdbe7258 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/etherdevice.h>
#include "mt7603.h"
@@ -506,7 +506,6 @@ mt7603_init_txpower(struct mt7603_dev *dev,
}
}
-
int mt7603_register_device(struct mt7603_dev *dev)
{
struct mt76_bus_ops *bus_ops;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 81fb4276e742..a532676a1175 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/etherdevice.h>
#include <linux/timekeeping.h>
@@ -644,7 +644,6 @@ void mt7603_wtbl_set_rates(struct mt7603_dev *dev, struct mt7603_sta *sta,
rates[i].idx--;
}
-
}
w9 &= MT_WTBL2_W9_SHORT_GI_20 | MT_WTBL2_W9_SHORT_GI_40 |
@@ -1017,8 +1016,9 @@ mt7603_fill_txs(struct mt7603_dev *dev, struct mt7603_sta *sta,
sta->rate_probe = false;
}
spin_unlock_bh(&dev->mt76.lock);
- } else
+ } else {
info->status.rates[0] = rs->rates[first_idx / 2];
+ }
info->status.rates[0].count = 0;
for (i = 0, idx = first_idx; count && idx <= last_idx; idx++) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/main.c b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
index d70f42dac923..34dd05a36de9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
@@ -399,7 +399,7 @@ mt7603_ps_set_more_data(struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
- hdr = (struct ieee80211_hdr *) &skb->data[MT_TXD_SIZE];
+ hdr = (struct ieee80211_hdr *)&skb->data[MT_TXD_SIZE];
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
@@ -647,7 +647,8 @@ mt7603_set_coverage_class(struct ieee80211_hw *hw, s16 coverage_class)
mt7603_mac_set_timing(dev);
}
-static void mt7603_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
+static void mt7603_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
index 343ddc5543c2..02b2bd60d04d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/firmware.h>
#include "mt7603.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/pci.c b/drivers/net/wireless/mediatek/mt76/mt7603/pci.c
index 4acdbf5d8968..2f2f337e2201 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/pci.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/soc.c b/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
index b920be1f5718..b7138485844a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/soc.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include <linux/kernel.h>
#include <linux/module.h>
--
2.18.0
^ permalink raw reply related
* [PATCH 0/5] fix many checkpatch.pl warnings
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
This gathers many subsets to fix checkpatch.pl warnings.
I still keep some warnings there due to readability.
(The most of them are - networking block comments or 80 characters limit)
Ryder Lee (5):
mt76: Add paragraphs to describe the config symbols fully
mt76: mt7603: fix some checkpatch warnings
mt76: mt7615: fix some checkpatch warnings
mt76: mt76x02: fix some checkpatch warnings
mt76: fix some checkpatch warnings
drivers/net/wireless/mediatek/mt76/agg-rx.c | 21 +++++----
drivers/net/wireless/mediatek/mt76/dma.c | 2 +-
drivers/net/wireless/mediatek/mt76/mac80211.c | 30 ++++++------
drivers/net/wireless/mediatek/mt76/mt76.h | 46 +++++++++----------
.../net/wireless/mediatek/mt76/mt7603/Kconfig | 6 ++-
.../wireless/mediatek/mt76/mt7603/beacon.c | 2 +-
.../net/wireless/mediatek/mt76/mt7603/core.c | 2 +-
.../wireless/mediatek/mt76/mt7603/debugfs.c | 2 +-
.../net/wireless/mediatek/mt76/mt7603/dma.c | 7 +--
.../wireless/mediatek/mt76/mt7603/eeprom.c | 2 +-
.../net/wireless/mediatek/mt76/mt7603/init.c | 3 +-
.../net/wireless/mediatek/mt76/mt7603/mac.c | 6 +--
.../net/wireless/mediatek/mt76/mt7603/main.c | 7 +--
.../net/wireless/mediatek/mt76/mt7603/mcu.c | 2 +-
.../net/wireless/mediatek/mt76/mt7603/pci.c | 2 +-
.../net/wireless/mediatek/mt76/mt7603/soc.c | 2 +-
.../net/wireless/mediatek/mt76/mt7615/Kconfig | 7 ++-
.../wireless/mediatek/mt76/mt7615/debugfs.c | 2 +-
.../net/wireless/mediatek/mt76/mt7615/mac.c | 5 +-
.../net/wireless/mediatek/mt76/mt7615/mcu.c | 2 -
.../net/wireless/mediatek/mt76/mt76x0/Kconfig | 12 ++++-
.../wireless/mediatek/mt76/mt76x0/mt76x0.h | 2 +-
.../net/wireless/mediatek/mt76/mt76x0/phy.c | 23 ++++++----
.../net/wireless/mediatek/mt76/mt76x0/phy.h | 10 ++--
.../net/wireless/mediatek/mt76/mt76x0/usb.c | 6 +--
drivers/net/wireless/mediatek/mt76/mt76x02.h | 25 +++++-----
.../wireless/mediatek/mt76/mt76x02_beacon.c | 4 +-
.../net/wireless/mediatek/mt76/mt76x02_mac.c | 16 +++----
.../net/wireless/mediatek/mt76/mt76x02_mcu.c | 13 +++---
.../net/wireless/mediatek/mt76/mt76x02_mmio.c | 11 +++--
.../net/wireless/mediatek/mt76/mt76x02_phy.c | 3 +-
.../net/wireless/mediatek/mt76/mt76x02_regs.h | 28 +++++------
.../wireless/mediatek/mt76/mt76x02_trace.h | 3 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
.../net/wireless/mediatek/mt76/mt76x02_util.c | 20 ++++----
.../net/wireless/mediatek/mt76/mt76x2/Kconfig | 14 ++++--
.../wireless/mediatek/mt76/mt76x2/eeprom.c | 10 ++--
.../net/wireless/mediatek/mt76/mt76x2/mcu.h | 3 +-
.../wireless/mediatek/mt76/mt76x2/pci_init.c | 1 -
.../wireless/mediatek/mt76/mt76x2/pci_mcu.c | 4 +-
.../net/wireless/mediatek/mt76/mt76x2/phy.c | 3 +-
drivers/net/wireless/mediatek/mt76/trace.h | 9 ++--
drivers/net/wireless/mediatek/mt76/tx.c | 18 ++++----
drivers/net/wireless/mediatek/mt76/usb.c | 31 +++++++------
.../net/wireless/mediatek/mt76/usb_trace.h | 11 +++--
drivers/net/wireless/mediatek/mt76/util.h | 4 +-
46 files changed, 242 insertions(+), 202 deletions(-)
--
2.18.0
^ permalink raw reply
* [PATCH 3/5] mt76: mt7615: fix some checkpatch warnings
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
In-Reply-To: <cover.1563772403.git.ryder.lee@mediatek.com>
This fixes the following checkpatch.pl warning:
WARNING: Improper SPDX comment style
Fix blank lines.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 5 +++--
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 2 --
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c
index ed605fcc99f9..2618248946a1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: ISC */
+// SPDX-License-Identifier: ISC
#include "mt7615.h"
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index b3e8ee06a783..8f9a2bb68ded 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -508,7 +508,6 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta,
rates[i].idx--;
}
-
}
val[0] = mt7615_mac_tx_rate_val(dev, &rates[0], stbc, &bw);
@@ -586,6 +585,7 @@ void mt7615_mac_set_rates(struct mt7615_dev *dev, struct mt7615_sta *sta,
sta->rate_count = 2 * MT7615_RATE_RETRY * n_rates;
sta->wcid.tx_info |= MT_WCID_TX_INFO_SET;
}
+
int mt7615_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
enum mt76_txq_id qid, struct mt76_wcid *wcid,
struct ieee80211_sta *sta,
@@ -725,8 +725,9 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
sta->rate_probe = false;
}
spin_unlock_bh(&dev->mt76.lock);
- } else
+ } else {
info->status.rates[0] = rs->rates[first_idx / 2];
+ }
info->status.rates[0].count = 0;
for (i = 0, idx = first_idx; count && idx <= last_idx; idx++) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index e57b51290c61..5fd162be3654 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -1646,5 +1646,3 @@ int mt7615_mcu_set_rx_ba(struct mt7615_dev *dev,
return __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_WTBL_UPDATE,
&wtbl_req, sizeof(wtbl_req), true);
}
-
-
--
2.18.0
^ permalink raw reply related
* [PATCH 1/5] mt76: Add paragraphs to describe the config symbols fully
From: Ryder Lee @ 2019-07-22 5:31 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Roy Luo, YF Luo, Yiwei Chung, Sean Wang, linux-wireless,
linux-mediatek, Ryder Lee
In-Reply-To: <cover.1563772403.git.ryder.lee@mediatek.com>
Update the help text to fix checkpatch.pl warning:
WARNING: please write a paragraph that describes the config symbol fully
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt7603/Kconfig | 6 ++++--
drivers/net/wireless/mediatek/mt76/mt7615/Kconfig | 7 ++++++-
drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig | 12 ++++++++++--
drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig | 14 +++++++++++---
4 files changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig
index e108bf881ca8..69cc74bce060 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig
@@ -5,6 +5,8 @@ config MT7603E
depends on MAC80211
depends on PCI
help
- This adds support for MT7603E wireless PCIe devices and the WLAN core on
- MT7628/MT7688 SoC devices
+ This adds support for MT7603E wireless PCIe devices and the WLAN core
+ on MT7628/MT7688 SoC devices. This family supports 2x2 IEEE 802.11n
+ 300Mbps PHY rate
+ To compile this driver as a module, choose M here.
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig
index 2ed47b309b6e..dfc110b4bcb6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig
@@ -5,4 +5,9 @@ config MT7615E
depends on MAC80211
depends on PCI
help
- This adds support for MT7615-based wireless PCIe devices.
+ This adds support for MT7615-based wireless PCIe devices, which
+ support concurrent dual-band operation at 5GHz and 2.4GHz band,
+ 4x4:4SS IEEE 802.11ac 1733Mbps PHY rate, wave2 MU-MIMO up to 4
+ users/group and 160MHz channels.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig
index 209d8abc49d5..fb8fe98512ea 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig
@@ -10,7 +10,11 @@ config MT76x0U
depends on MAC80211
depends on USB
help
- This adds support for MT7610U-based wireless USB dongles.
+ This adds support for MT7610U-based wireless USB 2.0 dongles,
+ which complie with IEEE 802.11ac standards and support 1x1
+ 433Mbps PHY rate.
+
+ To compile this driver as a module, choose M here.
config MT76x0E
tristate "MediaTek MT76x0E (PCIe) support"
@@ -18,4 +22,8 @@ config MT76x0E
depends on MAC80211
depends on PCI
help
- This adds support for MT7610/MT7630-based wireless PCIe devices.
+ This adds support for MT7610/MT7630-based wireless PCIe devices,
+ which complie with IEEE 802.11ac standards and support 1x1
+ 433Mbps PHY rate.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig
index 1f69908f8373..c4fe52d8c88b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig
@@ -8,8 +8,12 @@ config MT76x2E
select MT76x2_COMMON
depends on MAC80211
depends on PCI
- ---help---
- This adds support for MT7612/MT7602/MT7662-based wireless PCIe devices.
+ help
+ This adds support for MT7612/MT7602/MT7662-based wireless PCIe
+ devices, which complie with IEEE 802.11ac standards and support
+ 2SS to 866Mbit/s PHY rate.
+
+ To compile this driver as a module, choose M here.
config MT76x2U
tristate "MediaTek MT76x2U (USB) support"
@@ -18,4 +22,8 @@ config MT76x2U
depends on MAC80211
depends on USB
help
- This adds support for MT7612U-based wireless USB dongles.
+ This adds support for MT7612U-based wireless USB 3.0 dongles,
+ which complie with IEEE 802.11ac standards and support 2SS
+ to 866Mbit/s PHY rate.
+
+ To compile this driver as a module, choose M here.
--
2.18.0
^ permalink raw reply related
* [PATCH] brcmfmac: don't net_ratelimit() CONSOLE messages on firmware crash
From: Rafał Miłecki @ 2019-07-21 19:52 UTC (permalink / raw)
To: Kalle Valo
Cc: Arend van Spriel, Franky Lin, Hante Meuleman, Chi-Hsien Lin,
Wright Feng, Winnie Chang, linux-wireless, brcm80211-dev-list.pdl,
brcm80211-dev-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
Firmware crash is a pretty rare event and can't happen too frequently as
it has to be followed by a hardware reinitialization and config reload.
It should be safe to don't use net_ratelimit() when it happens.
For reporting & debugging purposes it's important to provide a complete
log as the last lines are actually the most important. This change
modifies brcmfmac to print all messages in an unlimited way in that
specific case. With this change there should be finally a backtrace of
firmware finally visible after a crash.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index e488b1aaaee2..7ac945369762 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -794,7 +794,8 @@ static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo,
if (ch == '\n') {
console->log_str[console->log_idx] = 0;
if (error)
- brcmf_err(bus, "CONSOLE: %s", console->log_str);
+ __brcmf_err(bus, __func__, "CONSOLE: %s",
+ console->log_str);
else
pr_debug("CONSOLE: %s", console->log_str);
console->log_idx = 0;
--
2.21.0
^ permalink raw reply related
* Re: pull-request: mac80211 2019-07-20
From: David Miller @ 2019-07-21 18:39 UTC (permalink / raw)
To: johannes; +Cc: netdev, linux-wireless
In-Reply-To: <20190720202456.8444-1-johannes@sipsolutions.net>
From: Johannes Berg <johannes@sipsolutions.net>
Date: Sat, 20 Jul 2019 22:24:55 +0200
> Sorry, this really should've gone out much earlier, in partilar
> the vendor command fixes. Not much for now, more -next material
> will come later.
>
> Please pull and let me know if there's any problem.
Pulled, thanks Johannes.
^ permalink raw reply
* Re: [PATCH 1/3] mt76: fix checkpatch warnings and errors
From: Joe Perches @ 2019-07-21 16:56 UTC (permalink / raw)
To: Kalle Valo, Ryder Lee
Cc: Felix Fietkau, Lorenzo Bianconi, Roy Luo, YF Luo, Yiwei Chung,
Sean Wang, linux-wireless, linux-mediatek, linux-kernel
In-Reply-To: <87blxnsmxm.fsf@purkki.adurom.net>
On Sun, 2019-07-21 at 13:26 +0300, Kalle Valo wrote:
> Ryder Lee <ryder.lee@mediatek.com> writes:
> > Fix warnings and errors as much as possible.
[]
> This is way too big and the commit log is too vague, please fix one
> problem at a time and describe in the commit log what you fixed.
Hello Ryder.
One option is to perform all the whitespace corrections
in a single patch and then show that the object files
have not changed.
I posted a trivial script several years ago that might
be of some help here.
https://lore.kernel.org/lkml/1405128087.6751.12.camel@joe-AO725/
It trivially reformats using checkpatch and produces a
possible set of changes that can be used to update a
git tree.
^ permalink raw reply
* Re: Regression with the latest iwlwifi-9260-*-46.ucode
From: Takashi Iwai @ 2019-07-21 16:43 UTC (permalink / raw)
To: Luca Coelho
Cc: dor.shaish, Josh Boyer, Johannes Berg, Emmanuel Grumbach,
linux-wireless, linux-kernel
In-Reply-To: <b225d043d8581e0fec68cb63f7433161868293f3.camel@coelho.fi>
On Sat, 20 Jul 2019 22:49:33 +0200,
Luca Coelho wrote:
>
> On Sat, 2019-07-20 at 22:42 +0200, Takashi Iwai wrote:
> > On Fri, 19 Jul 2019 20:07:46 +0200,
> > Takashi Iwai wrote:
> > > On Fri, 19 Jul 2019 18:36:53 +0200,
> > > Luciano Coelho wrote:
> > > > Adding Dor.
> > > >
> > > > Hi Takashi,
> > > >
> > > > Do you have full logs of the crash? We can't see much from the log
> > > > snippet pasted in the bug report.
> > >
> > > OK, I'll ask reporters. If you have a SUSE/openSUSE bugzilla account,
> > > feel free to join there.
> >
> > FYI, the dmesg's have been uploaded to the same bugzilla entry:
> > https://bugzilla.opensuse.org/show_bug.cgi?id=1142128
> >
>
> Thanks!
>
> BTW, I pushed new firmwares to our firmware tree in git.kernel.org
> today. This is the patch:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware.git/commit/?id=b5f09bb4f816abace0227d0f4e749859364cef6b
>
> It would be great if you can try it out and let us know whether the problem is gone or not.
I created a test package and asked for testing.
The test result seems negative, showing the same error,
unfortunately.
The dmesg was uploaded on the bugzilla entry.
HTH,
Takashi
^ permalink raw reply
* Re: Problems loading ath9k (ar93xx) calibration data
From: Kristian Evensen @ 2019-07-21 13:52 UTC (permalink / raw)
To: linux-wireless
In-Reply-To: <CAKfDRXhVQvJYAiacyMx0sGqrh6L7KR606FaBdh4nhznsKY0TMg@mail.gmail.com>
Hello again,
On Sun, Jul 21, 2019 at 3:10 PM Kristian Evensen
<kristian.evensen@gmail.com> wrote:
> Considering that the next byte has the value 0x1, I suspect the issue
> might be related to endianess. However, I haven't found a way to
> trigger an endianess-conversion when the calibration data is read for
> file. Is there something I am missing or is this not supported?
>
> Could endianess be an explanation for the error I am seeing, or are
> there other things in the calibration data the looks like it could
> cause problems as well?
I took a second look at the ath9k-driver and see that 0x1 is the value
of AR5416_OPFLAGS_11A, which sets the CAP_5GHz flag. My card is only
2.4 GHz, so then I guess the endianess-theory was wrong.
BR,
Kristian
^ permalink raw reply
* Problems loading ath9k (ar93xx) calibration data
From: Kristian Evensen @ 2019-07-21 13:10 UTC (permalink / raw)
To: linux-wireless
Hello,
I am currently trying to bring up a ramips-based board with a built-in
wifi based on ar93xx. The wifi does not have an eeprom, instead the
calibration data is stored on the flash storage. I have set the
"qca,no-eeprom" option in the node in the dts, extracted the
calibration data and stored it in a file with the correct name in
/lib/firmware. The content of calibration data file can be seen here:
https://pastebin.com/zF6cRetV
I can see that the firmware file is loaded when I boot my board, but
initialization of the wifi device fails. The error message I get is:
[ 12.314349] bus=0x1, slot = 0x0, irq=0xff
[ 12.318839] ath9k 0000:01:00.0: Direct firmware load for
ath9k-eeprom-pci-0000:01:00.0.bin failed with error -2
[ 12.328932] ath9k 0000:01:00.0: Falling back to user helper
[ 12.424131] ath: phy0: both bands are disabled
[ 12.428713] ath: phy0: Unable to initialize hardware;
initialization status: -22
[ 12.436127] ath9k 0000:01:00.0: Failed to initialize device
[ 12.441890] ath9k: probe of 0000:01:00.0 failed with error -22
When looking into the content of the eeprom-file, I see that the byte
matching opFlags has the value 0x08. Based on my understanding of the
driver, the only valid values are 0x1, 0x2 and 0x3.
Considering that the next byte has the value 0x1, I suspect the issue
might be related to endianess. However, I haven't found a way to
trigger an endianess-conversion when the calibration data is read for
file. Is there something I am missing or is this not supported?
Could endianess be an explanation for the error I am seeing, or are
there other things in the calibration data the looks like it could
cause problems as well?
Thanks in advance for any help.
BR,
Kristian
^ permalink raw reply
* Re: [PATCH 3/3] mt76: mt7615: add cwmin/cwmax initial values
From: Kalle Valo @ 2019-07-21 10:28 UTC (permalink / raw)
To: Ryder Lee
Cc: Felix Fietkau, Lorenzo Bianconi, Roy Luo, YF Luo, Yiwei Chung,
Sean Wang, linux-wireless, linux-mediatek, linux-kernel
In-Reply-To: <c83e14787bc86f8f8062e0aa44e03ef80c3fd38a.1563518381.git.ryder.lee@mediatek.com>
Ryder Lee <ryder.lee@mediatek.com> writes:
> Add initial values in mt7615_mcu_set_wmm() to cleanup setup flow.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
[...]
> -#define WMM_AIFS_SET BIT(0)
> -#define WMM_CW_MIN_SET BIT(1)
> -#define WMM_CW_MAX_SET BIT(2)
> -#define WMM_TXOP_SET BIT(3)
> +#define WMM_PARAM_SET GENMASK(3, 0)
I don't see how this is any better? IMHO you just hide what is the
meaning of each bit.
--
Kalle Valo
^ permalink raw reply
* Re: [PATCH 1/3] mt76: fix checkpatch warnings and errors
From: Kalle Valo @ 2019-07-21 10:26 UTC (permalink / raw)
To: Ryder Lee
Cc: Felix Fietkau, Lorenzo Bianconi, Roy Luo, YF Luo, Yiwei Chung,
Sean Wang, linux-wireless, linux-mediatek, linux-kernel
In-Reply-To: <50d28c9b0f9e7d6b277d36fc93f55142d7535259.1563518381.git.ryder.lee@mediatek.com>
Ryder Lee <ryder.lee@mediatek.com> writes:
> Fix warnings and errors as much as possible.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> drivers/net/wireless/mediatek/mt76/agg-rx.c | 21 +++++----
> drivers/net/wireless/mediatek/mt76/dma.c | 2 +-
> drivers/net/wireless/mediatek/mt76/mac80211.c | 30 ++++++------
> drivers/net/wireless/mediatek/mt76/mt76.h | 46 +++++++++----------
> .../wireless/mediatek/mt76/mt7603/beacon.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7603/core.c | 2 +-
> .../wireless/mediatek/mt76/mt7603/debugfs.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7603/dma.c | 7 +--
> .../wireless/mediatek/mt76/mt7603/eeprom.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7603/init.c | 3 +-
> .../net/wireless/mediatek/mt76/mt7603/mac.c | 6 +--
> .../net/wireless/mediatek/mt76/mt7603/main.c | 7 +--
> .../net/wireless/mediatek/mt76/mt7603/mcu.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7603/pci.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7603/soc.c | 2 +-
> .../wireless/mediatek/mt76/mt7615/debugfs.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7615/mac.c | 5 +-
> .../net/wireless/mediatek/mt76/mt7615/mcu.c | 2 -
> .../wireless/mediatek/mt76/mt76x0/mt76x0.h | 2 +-
> .../net/wireless/mediatek/mt76/mt76x0/phy.c | 23 ++++++----
> .../net/wireless/mediatek/mt76/mt76x0/phy.h | 10 ++--
> .../net/wireless/mediatek/mt76/mt76x0/usb.c | 6 +--
> drivers/net/wireless/mediatek/mt76/mt76x02.h | 24 +++++-----
> .../wireless/mediatek/mt76/mt76x02_beacon.c | 3 +-
> .../net/wireless/mediatek/mt76/mt76x02_mac.c | 16 +++----
> .../net/wireless/mediatek/mt76/mt76x02_mcu.c | 13 +++---
> .../net/wireless/mediatek/mt76/mt76x02_mmio.c | 11 +++--
> .../net/wireless/mediatek/mt76/mt76x02_phy.c | 3 +-
> .../net/wireless/mediatek/mt76/mt76x02_regs.h | 18 ++++----
> .../wireless/mediatek/mt76/mt76x02_trace.h | 3 +-
> .../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
> .../net/wireless/mediatek/mt76/mt76x02_util.c | 20 ++++----
> .../wireless/mediatek/mt76/mt76x2/eeprom.c | 10 ++--
> .../wireless/mediatek/mt76/mt76x2/pci_init.c | 1 -
> .../wireless/mediatek/mt76/mt76x2/pci_mcu.c | 4 +-
> .../net/wireless/mediatek/mt76/mt76x2/phy.c | 3 +-
> drivers/net/wireless/mediatek/mt76/trace.h | 9 ++--
> drivers/net/wireless/mediatek/mt76/tx.c | 14 +++---
> drivers/net/wireless/mediatek/mt76/usb.c | 31 +++++++------
> .../net/wireless/mediatek/mt76/usb_trace.h | 11 +++--
> drivers/net/wireless/mediatek/mt76/util.h | 4 +-
> 41 files changed, 201 insertions(+), 185 deletions(-)
This is way too big and the commit log is too vague, please fix one
problem at a time and describe in the commit log what you fixed.
--
Kalle Valo
^ permalink raw reply
* Re: [PATCH] rat_cs: Remove duplicate code
From: Stefano Brivio @ 2019-07-21 9:12 UTC (permalink / raw)
To: Hariprasad Kelam
Cc: Kalle Valo, David S. Miller, linux-wireless, netdev, linux-kernel
In-Reply-To: <20190720174613.GA31062@hari-Inspiron-1545>
On Sat, 20 Jul 2019 23:16:47 +0530
Hariprasad Kelam <hariprasad.kelam@gmail.com> wrote:
> Code is same if translate is true/false in case invalid packet is
> received.So remove else part.
>
> Issue identified with coccicheck
>
> Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
> ---
> drivers/net/wireless/ray_cs.c | 29 ++++++++---------------------
> 1 file changed, 8 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
> index cf37268..a51bbe7 100644
> --- a/drivers/net/wireless/ray_cs.c
> +++ b/drivers/net/wireless/ray_cs.c
> @@ -2108,29 +2108,16 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
> #endif
>
> if (!sniffer) {
> - if (translate) {
> /* TBD length needs fixing for translated header */
> - if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
> - rx_len >
> - (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
> - FCS_LEN)) {
> - pr_debug(
> - "ray_cs invalid packet length %d received\n",
> - rx_len);
> - return;
> - }
> - } else { /* encapsulated ethernet */
> -
> - if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
> - rx_len >
> - (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
> - FCS_LEN)) {
> - pr_debug(
> - "ray_cs invalid packet length %d received\n",
> - rx_len);
> - return;
> + if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
> + rx_len >
> + (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
> + FCS_LEN)) {
> + pr_debug(
> + "ray_cs invalid packet length %d received\n",
> + rx_len);
> + return;
> }
> - }
NACK. The TBD comment makes no sense anymore if you remove one of the
branches. Believe me or not, I have one of those cards, a (yes, 22
years old) Buslink Raytheon model 24020. That check needed (for sure)
and needs (maybe) to be fixed.
Besides, patch subject and resulting coding style are also wrong.
--
Stefano
^ permalink raw reply
* Re: [PATCH] brcmfmac: change the order of things in brcmf_detach()
From: Arend Van Spriel @ 2019-07-20 21:34 UTC (permalink / raw)
To: Rafał Miłecki, Piotr Figiel; +Cc: linux-wireless
In-Reply-To: <b0cacc7a-22b2-82dd-f2e0-154abf1c9f69@milecki.pl>
On July 20, 2019 6:26:30 PM Rafał Miłecki <rafal@milecki.pl> wrote:
> On 30.04.2019 12:10, Arend Van Spriel wrote:
>> On 4/30/2019 10:11 AM, Piotr Figiel wrote:
>>> Hi Arend,
>>>
>>> On Mon, Apr 29, 2019 at 12:09:21PM +0200, Arend van Spriel wrote:
>>>> When brcmf_detach() from the bus layer upon rmmod we can no longer
>>>> communicate. Hence we will set the bus state to DOWN and cleanup
>>>> the event and protocol layer. The network interfaces need to be
>>>> deleted before brcmf_cfg80211_detach() because the latter does the
>>>> wiphy_unregister() which issues a warning if there are still network
>>>> devices linked to the wiphy instance.
>>>
>>> This seems to already happen - brcmf_cfg80211_detach() is called after the
>>> interfaces are removed.
>>
>> Right. This was just to remind me why brcmf_cfg80211_detach() must be
>> called after removing the interfaces.
>>
>>>> This change solves a null pointer dereference issue which happened
>>>> upon issueing rmmod while there are packets queued in bus protocol
>>>> layer.
>>>>
>>>>
>>>> Reported-by: Rafał Miłecki <rafal@milecki.pl>
>>>> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
>>>> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
>>>> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
>>>> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
>>>> ---
>>>> Hi Piotr,
>>>>
>>>>
>>>> While working on an issue with msgbuf protocol (used for PCIe devices)
>>>> your change 5cdb0ef6144f ("brcmfmac: fix NULL pointer derefence during
>>>> USB disconnect") conflicted. I suspect my reordering stuff in
>>>> brcmf_detach() also fixes your issue so could you retest this patch,
>>>> which basically reverts your change and applies my reordering, and see
>>>> whether my suspicion can be confirmed.
>>>
>>> Does the issue reported by Rafał you are trying to solve with this patch occur
>>> on current linux-next?
>>
>> Looking at you patch I suspect it does, because brcmf_proto_msgbuf_detach()
>> is invoked in brcmf_proto_detach_post_delif(). However, I could not
>> reproduce it with or without the patch.
>>
>> Rafał,
>>
>> Do you know whether your reported issue, ie. calling brcmf_tx_finalize()
>> after interfaces were removed, still exists in wireless-testing (or
>> linux-next).
>
> Sorry for a terribly late reply. It took me many attempts to crash a
> firmware in a fully reproducible way.
>
> I can say for sure this patch fixes crashes in brcmf_txfinalize() I saw
> when unloading brcmfmac after a crash.
Thanks, Rafał
There was no deadline so no need to feel sorry.
Regards,
Arend
^ permalink raw reply
* Re: [PATCH] mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
From: Lorenzo Bianconi @ 2019-07-20 21:29 UTC (permalink / raw)
To: Johannes Berg; +Cc: Lorenzo Bianconi, Felix Fietkau, linux-wireless
In-Reply-To: <2dffacc1bcbf001d38a173cdce7d141a3dd130a7.camel@sipsolutions.net>
>
> On Fri, 2019-07-19 at 00:50 +0200, Lorenzo Bianconi wrote:
> > Convert MT7603_WATCHDOG_TIME in jiffies rescheduling watchdog delayed
> > work
>
> Seems a bit inconsistent to me, the previous patch for mt7615 used
> jiffies in the define, but here you convert?
>
Hi Johannes,
I personally prefer to define the timeout directly in jiffies (as it
is done in mt76x02) but MT7603_WATCHDOG_TIME is already used in this
way (e.g. mt7603_mac_work()) so I have just maintained the convention.
Anyway we can convert it as well.
Regards,
Lorenzo
> johannes
>
^ permalink raw reply
* Re: [PATCH 2/7] brcmfmac: change the order of things in brcmf_detach()
From: Rafał Miłecki @ 2019-07-20 21:26 UTC (permalink / raw)
To: Arend van Spriel, Kalle Valo; +Cc: linux-wireless
In-Reply-To: <1562835912-1404-3-git-send-email-arend.vanspriel@broadcom.com>
On 11.07.2019 11:05, Arend van Spriel wrote:
> When brcmf_detach() from the bus layer upon rmmod we can no longer
> communicate. Hence we will set the bus state to DOWN and cleanup
> the event and protocol layer. The network interfaces need to be
> deleted before brcmf_cfg80211_detach() because the latter does the
> wiphy_unregister() which issues a warning if there are still network
> devices linked to the wiphy instance.
>
> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
This fixes a rmmod crash in brcmf_txfinalize() that I reported in the:
brcmfmac: NULL pointer dereference during brcmf_detach() after firmware crash
<b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com>
https://www.spinics.net/lists/linux-wireless/msg182913.html
Tested-by: Rafał Miłecki <rafal@milecki.pl>
^ permalink raw reply
* Re: Regression with the latest iwlwifi-9260-*-46.ucode
From: Luca Coelho @ 2019-07-20 20:49 UTC (permalink / raw)
To: Takashi Iwai
Cc: dor.shaish, Josh Boyer, Johannes Berg, Emmanuel Grumbach,
linux-wireless, linux-kernel
In-Reply-To: <s5hwogcxwt4.wl-tiwai@suse.de>
On Sat, 2019-07-20 at 22:42 +0200, Takashi Iwai wrote:
> On Fri, 19 Jul 2019 20:07:46 +0200,
> Takashi Iwai wrote:
> > On Fri, 19 Jul 2019 18:36:53 +0200,
> > Luciano Coelho wrote:
> > > Adding Dor.
> > >
> > > Hi Takashi,
> > >
> > > Do you have full logs of the crash? We can't see much from the log
> > > snippet pasted in the bug report.
> >
> > OK, I'll ask reporters. If you have a SUSE/openSUSE bugzilla account,
> > feel free to join there.
>
> FYI, the dmesg's have been uploaded to the same bugzilla entry:
> https://bugzilla.opensuse.org/show_bug.cgi?id=1142128
>
Thanks!
BTW, I pushed new firmwares to our firmware tree in git.kernel.org
today. This is the patch:
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware.git/commit/?id=b5f09bb4f816abace0227d0f4e749859364cef6b
It would be great if you can try it out and let us know whether the problem is gone or not.
--
Cheers,
Luca.
^ permalink raw reply
* Re: Regression with the latest iwlwifi-9260-*-46.ucode
From: Takashi Iwai @ 2019-07-20 20:42 UTC (permalink / raw)
To: Luciano Coelho
Cc: dor.shaish, Josh Boyer, Johannes Berg, Emmanuel Grumbach,
linux-wireless, linux-kernel
In-Reply-To: <s5ho91pzyml.wl-tiwai@suse.de>
On Fri, 19 Jul 2019 20:07:46 +0200,
Takashi Iwai wrote:
>
> On Fri, 19 Jul 2019 18:36:53 +0200,
> Luciano Coelho wrote:
> >
> > Adding Dor.
> >
> > Hi Takashi,
> >
> > Do you have full logs of the crash? We can't see much from the log
> > snippet pasted in the bug report.
>
> OK, I'll ask reporters. If you have a SUSE/openSUSE bugzilla account,
> feel free to join there.
FYI, the dmesg's have been uploaded to the same bugzilla entry:
https://bugzilla.opensuse.org/show_bug.cgi?id=1142128
thanks,
Takashi
^ permalink raw reply
* Re: [PATCH] mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
From: Johannes Berg @ 2019-07-20 20:28 UTC (permalink / raw)
To: Lorenzo Bianconi, nbd; +Cc: lorenzo.bianconi, linux-wireless
In-Reply-To: <a266417a71907f663991142f5ce44becc09e6996.1563490117.git.lorenzo@kernel.org>
On Fri, 2019-07-19 at 00:50 +0200, Lorenzo Bianconi wrote:
> Convert MT7603_WATCHDOG_TIME in jiffies rescheduling watchdog delayed
> work
Seems a bit inconsistent to me, the previous patch for mt7615 used
jiffies in the define, but here you convert?
johannes
^ permalink raw reply
* pull-request: mac80211 2019-07-20
From: Johannes Berg @ 2019-07-20 20:24 UTC (permalink / raw)
To: David Miller; +Cc: netdev, linux-wireless
Hi Dave,
Sorry, this really should've gone out much earlier, in partilar
the vendor command fixes. Not much for now, more -next material
will come later.
Please pull and let me know if there's any problem.
Thanks,
johannes
The following changes since commit 1a03bb532934e90c7d662f7c59f4f66ea8451fa4:
r8169: fix RTL8168g PHY init (2019-07-20 12:17:45 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git tags/mac80211-for-davem-2019-07-20
for you to fetch changes up to d2b3fe42bc629c2d4002f652b3abdfb2e72991c7:
mac80211: don't warn about CW params when not using them (2019-07-20 21:40:32 +0200)
----------------------------------------------------------------
We have a handful of fixes:
* ignore bad CW parameters if we aren't using them,
instead of warning
* fix operation (and then build) with the new netlink vendor
command policy requirement
* fix a memory leak in an error path when setting beacons
----------------------------------------------------------------
Brian Norris (1):
mac80211: don't warn about CW params when not using them
Johannes Berg (2):
wireless: fix nl80211 vendor commands
nl80211: fix VENDOR_CMD_RAW_DATA
John Crispin (1):
nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
Lorenzo Bianconi (1):
mac80211: fix possible memory leak in ieee80211_assign_beacon
drivers/net/wireless/ath/wil6210/cfg80211.c | 4 ++++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 1 +
drivers/net/wireless/ti/wlcore/vendor_cmd.c | 3 +++
include/net/cfg80211.h | 2 +-
include/uapi/linux/nl80211.h | 2 +-
net/mac80211/cfg.c | 8 ++++++--
net/mac80211/driver-ops.c | 13 +++++++++----
7 files changed, 25 insertions(+), 8 deletions(-)
^ permalink raw reply
* Re: [PATCH] brcmfmac: change the order of things in brcmf_detach()
From: Rafał Miłecki @ 2019-07-20 16:26 UTC (permalink / raw)
To: Arend Van Spriel, Piotr Figiel; +Cc: linux-wireless@vger.kernel.org
In-Reply-To: <74b9f312-8c1a-daa8-6137-c664d37f06d1@broadcom.com>
On 30.04.2019 12:10, Arend Van Spriel wrote:
> On 4/30/2019 10:11 AM, Piotr Figiel wrote:
>> Hi Arend,
>>
>> On Mon, Apr 29, 2019 at 12:09:21PM +0200, Arend van Spriel wrote:
>>> When brcmf_detach() from the bus layer upon rmmod we can no longer
>>> communicate. Hence we will set the bus state to DOWN and cleanup
>>> the event and protocol layer. The network interfaces need to be
>>> deleted before brcmf_cfg80211_detach() because the latter does the
>>> wiphy_unregister() which issues a warning if there are still network
>>> devices linked to the wiphy instance.
>>
>> This seems to already happen - brcmf_cfg80211_detach() is called after the
>> interfaces are removed.
>
> Right. This was just to remind me why brcmf_cfg80211_detach() must be called after removing the interfaces.
>
>>> This change solves a null pointer dereference issue which happened
>>> upon issueing rmmod while there are packets queued in bus protocol
>>> layer.
>>>
>>> Reported-by: Rafał Miłecki <rafal@milecki.pl>
>>> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
>>> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
>>> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
>>> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
>>> ---
>>> Hi Piotr,
>>>
>>> While working on an issue with msgbuf protocol (used for PCIe devices)
>>> your change 5cdb0ef6144f ("brcmfmac: fix NULL pointer derefence during
>>> USB disconnect") conflicted. I suspect my reordering stuff in
>>> brcmf_detach() also fixes your issue so could you retest this patch,
>>> which basically reverts your change and applies my reordering, and see
>>> whether my suspicion can be confirmed.
>>
>> Does the issue reported by Rafał you are trying to solve with this patch occur
>> on current linux-next?
>
> Looking at you patch I suspect it does, because brcmf_proto_msgbuf_detach() is invoked in brcmf_proto_detach_post_delif(). However, I could not reproduce it with or without the patch.
>
> Rafał,
>
> Do you know whether your reported issue, ie. calling brcmf_tx_finalize() after interfaces were removed, still exists in wireless-testing (or linux-next).
Sorry for a terribly late reply. It took me many attempts to crash a
firmware in a fully reproducible way.
I can say for sure this patch fixes crashes in brcmf_txfinalize() I saw
when unloading brcmfmac after a crash.
^ permalink raw reply
* [PATCH] rat_cs: Remove duplicate code
From: Hariprasad Kelam @ 2019-07-20 17:46 UTC (permalink / raw)
To: Kalle Valo, David S. Miller, linux-wireless, netdev, linux-kernel
Code is same if translate is true/false in case invalid packet is
received.So remove else part.
Issue identified with coccicheck
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
---
drivers/net/wireless/ray_cs.c | 29 ++++++++---------------------
1 file changed, 8 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index cf37268..a51bbe7 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2108,29 +2108,16 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
#endif
if (!sniffer) {
- if (translate) {
/* TBD length needs fixing for translated header */
- if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
- rx_len >
- (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
- FCS_LEN)) {
- pr_debug(
- "ray_cs invalid packet length %d received\n",
- rx_len);
- return;
- }
- } else { /* encapsulated ethernet */
-
- if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
- rx_len >
- (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
- FCS_LEN)) {
- pr_debug(
- "ray_cs invalid packet length %d received\n",
- rx_len);
- return;
+ if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
+ rx_len >
+ (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
+ FCS_LEN)) {
+ pr_debug(
+ "ray_cs invalid packet length %d received\n",
+ rx_len);
+ return;
}
- }
}
pr_debug("ray_cs rx_data packet\n");
/* If fragmented packet, verify sizes of fragments add up */
--
2.7.4
^ permalink raw reply related
* [PATCH 13/16] iwlwifi: mvm: fix frame drop from the reordering buffer
From: Luca Coelho @ 2019-07-20 10:25 UTC (permalink / raw)
To: kvalo; +Cc: linux-wireless, Emmanuel Grumbach, Luca Coelho
In-Reply-To: <20190720102545.5952-1-luca@coelho.fi>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
An earlier patch made sure that the queues are not lagging
too far behind. This means that iwl_mvm_release_frames
should not be called with a head_sn too far behind NSSN.
Don't take the risk to change completely the entry
condition to iwl_mvm_release_frames, but don't update
the head_sn is the NSSN is more than 2048 packets ahead
of us. Since this just cannot be right. This means that
the scenario described here happened. We are queue 0.
Q:0 Q:1
head_sn: 0 -> 2047
head_sn: 2048
Lots of packets arrive:
head_sn: 2047 -> 2150
send NSSN_SYNC notification
Handle notification
from the firmware and
do NOT move the head_sn
back to 2048
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 44 ++++++++++++++-----
1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 4f4fdaf49eef..854edd7d7103 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -518,12 +518,17 @@ static void iwl_mvm_sync_nssn(struct iwl_mvm *mvm, u8 baid, u16 nssn)
#define RX_REORDER_BUF_TIMEOUT_MQ (HZ / 10)
+enum iwl_mvm_release_flags {
+ IWL_MVM_RELEASE_SEND_RSS_SYNC = BIT(0),
+ IWL_MVM_RELEASE_FROM_RSS_SYNC = BIT(1),
+};
+
static void iwl_mvm_release_frames(struct iwl_mvm *mvm,
struct ieee80211_sta *sta,
struct napi_struct *napi,
struct iwl_mvm_baid_data *baid_data,
struct iwl_mvm_reorder_buffer *reorder_buf,
- u16 nssn, bool sync_rss)
+ u16 nssn, u32 flags)
{
struct iwl_mvm_reorder_buf_entry *entries =
&baid_data->entries[reorder_buf->queue *
@@ -532,6 +537,18 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm,
lockdep_assert_held(&reorder_buf->lock);
+ /*
+ * We keep the NSSN not too far behind, if we are sync'ing it and it
+ * is more than 2048 ahead of us, it must be behind us. Discard it.
+ * This can happen if the queue that hit the 0 / 2048 seqno was lagging
+ * behind and this queue already processed packets. The next if
+ * would have caught cases where this queue would have processed less
+ * than 64 packets, but it may have processed more than 64 packets.
+ */
+ if ((flags & IWL_MVM_RELEASE_FROM_RSS_SYNC) &&
+ ieee80211_sn_less(nssn, ssn))
+ goto set_timer;
+
/* ignore nssn smaller than head sn - this can happen due to timeout */
if (iwl_mvm_is_sn_less(nssn, ssn, reorder_buf->buf_size))
goto set_timer;
@@ -542,7 +559,8 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm,
struct sk_buff *skb;
ssn = ieee80211_sn_inc(ssn);
- if (sync_rss && (ssn == 2048 || ssn == 0))
+ if ((flags & IWL_MVM_RELEASE_SEND_RSS_SYNC) &&
+ (ssn == 2048 || ssn == 0))
iwl_mvm_sync_nssn(mvm, baid_data->baid, ssn);
/*
@@ -631,7 +649,7 @@ void iwl_mvm_reorder_timer_expired(struct timer_list *t)
iwl_mvm_event_frame_timeout_callback(buf->mvm, mvmsta->vif,
sta, baid_data->tid);
iwl_mvm_release_frames(buf->mvm, sta, NULL, baid_data,
- buf, sn, true);
+ buf, sn, IWL_MVM_RELEASE_SEND_RSS_SYNC);
rcu_read_unlock();
} else {
/*
@@ -674,7 +692,7 @@ static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue,
iwl_mvm_release_frames(mvm, sta, NULL, ba_data, reorder_buf,
ieee80211_sn_add(reorder_buf->head_sn,
reorder_buf->buf_size),
- false);
+ 0);
spin_unlock_bh(&reorder_buf->lock);
del_timer_sync(&reorder_buf->reorder_timer);
@@ -684,7 +702,8 @@ static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue,
static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm,
struct napi_struct *napi,
- u8 baid, u16 nssn, int queue)
+ u8 baid, u16 nssn, int queue,
+ u32 flags)
{
struct ieee80211_sta *sta;
struct iwl_mvm_reorder_buffer *reorder_buf;
@@ -711,7 +730,7 @@ static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm,
spin_lock_bh(&reorder_buf->lock);
iwl_mvm_release_frames(mvm, sta, napi, ba_data,
- reorder_buf, nssn, false);
+ reorder_buf, nssn, flags);
spin_unlock_bh(&reorder_buf->lock);
out:
@@ -723,7 +742,8 @@ static void iwl_mvm_nssn_sync(struct iwl_mvm *mvm,
const struct iwl_mvm_nssn_sync_data *data)
{
iwl_mvm_release_frames_from_notif(mvm, napi, data->baid,
- data->nssn, queue);
+ data->nssn, queue,
+ IWL_MVM_RELEASE_FROM_RSS_SYNC);
}
void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi,
@@ -851,7 +871,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm,
if (ieee80211_is_back_req(hdr->frame_control)) {
iwl_mvm_release_frames(mvm, sta, napi, baid_data,
- buffer, nssn, false);
+ buffer, nssn, 0);
goto drop;
}
@@ -871,7 +891,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm,
u16 min_sn = ieee80211_sn_less(sn, nssn) ? sn : nssn;
iwl_mvm_release_frames(mvm, sta, napi, baid_data, buffer,
- min_sn, true);
+ min_sn, IWL_MVM_RELEASE_SEND_RSS_SYNC);
}
/* drop any oudated packets */
@@ -963,7 +983,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm,
*/
if (!amsdu || last_subframe)
iwl_mvm_release_frames(mvm, sta, napi, baid_data,
- buffer, nssn, true);
+ buffer, nssn,
+ IWL_MVM_RELEASE_SEND_RSS_SYNC);
spin_unlock_bh(&buffer->lock);
return true;
@@ -1936,5 +1957,6 @@ void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi,
struct iwl_frame_release *release = (void *)pkt->data;
iwl_mvm_release_frames_from_notif(mvm, napi, release->baid,
- le16_to_cpu(release->nssn), queue);
+ le16_to_cpu(release->nssn),
+ queue, 0);
}
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox