From: "Rafał Miłecki" <zajec5@gmail.com>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"John W. Linville" <linville@tuxdriver.com>,
"Michael Buesch" <mb@bu3sch.de>
Cc: bcm43xx-dev@lists.berlios.de
Subject: [PATCH 1/5] b43: N-PHY: implement b43_nphy_stay_in_carrier_search and it's calls (V2)
Date: Wed, 06 Jan 2010 21:54:38 +0100 [thread overview]
Message-ID: <op.u54ppc2h9lhzdc@linux-g0th.site> (raw)
In-Reply-To: <b170af451001061211y51b3ca6do11fb24fbb1193c51@mail.gmail.com>
V2: fix typo in deaf_count counting, improve b43_mac_[sr] calls,
rename function. Thanks Michael!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 58 ++++++++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/phy_n.h | 3 ++
2 files changed, 61 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index ceb429a..5252c0f 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -348,6 +348,64 @@ static void b43_nphy_reset_cca(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_BBCFG, bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
+static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+{
+ b43_phy_write(dev, B43_NPHY_C1_CLIP1THRES, clip_st[0]);
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1THRES, clip_st[1]);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
+static void b43_nphy_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+{
+ clip_st[0] = b43_phy_read(dev, B43_NPHY_C1_CLIP1THRES);
+ clip_st[1] = b43_phy_read(dev, B43_NPHY_C2_CLIP1THRES);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/classifier */
+static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
+{
+ u16 tmp;
+
+ if (dev->dev->id.revision == 16)
+ b43_mac_suspend(dev);
+
+ tmp = b43_phy_read(dev, B43_NPHY_CLASSCTL);
+ tmp &= (B43_NPHY_CLASSCTL_CCKEN | B43_NPHY_CLASSCTL_OFDMEN |
+ B43_NPHY_CLASSCTL_WAITEDEN);
+ tmp &= ~mask;
+ tmp |= (val & mask);
+ b43_phy_maskset(dev, B43_NPHY_CLASSCTL, 0xFFF8, tmp);
+
+ if (dev->dev->id.revision == 16)
+ b43_mac_enable(dev);
+
+ return tmp;
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/carriersearch */
+static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_n *nphy = phy->n;
+
+ if (enable) {
+ u16 clip[] = { 0xFFFF, 0xFFFF };
+ if (nphy->deaf_count++ == 0) {
+ nphy->classifier_state = b43_nphy_classifier(dev, 0, 0);
+ b43_nphy_classifier(dev, 0x7, 0);
+ b43_nphy_read_clip_detection(dev, nphy->clip_state);
+ b43_nphy_write_clip_detection(dev, clip);
+ }
+ b43_nphy_reset_cca(dev);
+ } else {
+ if (--nphy->deaf_count == 0) {
+ b43_nphy_classifier(dev, 0x7, nphy->classifier_state);
+ b43_nphy_write_clip_detection(dev, nphy->clip_state);
+ }
+ }
+}
+
enum b43_nphy_rf_sequence {
B43_RFSEQ_RX2TX,
B43_RFSEQ_TX2RX,
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index e5e402a..6ab07fc 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -932,6 +932,9 @@ struct b43_phy_n {
u32 deaf_count;
bool mute;
+ u16 classifier_state;
+ u16 clip_state[2];
+
u8 iqcal_chanspec_2G;
u8 rssical_chanspec_2G;
--
1.6.4.2
next prev parent reply other threads:[~2010-01-06 20:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 15:40 [PATCH 1/5] b43: N-PHY: implement b43_nphy_stay_carrier_search and it's calls Rafał Miłecki
2010-01-06 15:46 ` Rafał Miłecki
2010-01-06 15:50 ` Michael Buesch
2010-01-06 16:36 ` Larry Finger
2010-01-06 20:11 ` Rafał Miłecki
2010-01-06 20:54 ` Rafał Miłecki [this message]
2010-01-06 22:35 ` [PATCH 1/5] b43: N-PHY: implement b43_nphy_stay_in_carrier_search and it's calls (V2) Gábor Stefanik
2010-01-06 22:36 ` Gábor Stefanik
2010-01-06 22:45 ` Rafał Miłecki
2010-01-06 22:49 ` Gábor Stefanik
2010-01-06 22:59 ` Larry Finger
2010-01-06 23:12 ` Rafał Miłecki
2010-01-06 23:32 ` Gábor Stefanik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=op.u54ppc2h9lhzdc@linux-g0th.site \
--to=zajec5@gmail.com \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).